Functional and Functionally Structured Materials III

Preface
Chapter 1: Properties and Processing Technologies of Structural Alloys and Intermetallic Compounds
Effects of Solid Solution Temperature on Microstructure and Properties of Extruded and Forged FGH95 Superalloys
Creep Properties and Microstructural Evolution at 760 degreesC/785MPa of a Re-Containing Single Crystal Superalloy
Thoughts on High Performance Superalloy Design and Microstructural Characteristics of a Newly Designed Ni-Cr-Co-W Superalloy Applied above 850 degreesC
Microstructure-Dependent Deform Behavior of a Polycrystalline Ni-Based Superalloy Based on Micropillar Compression
Double Annealing Processes of Ti-5Al-5Mo-5V-1Cr-1Fe Titanium Alloy
Thermal Deformation Behavior and Critical Conditions of Dynamic Recrystallization of QCr0.8 Alloy
Effect of UDC Casting on Hot Deformation Behavior and Properties of 2A14 Aluminum Alloy
Numerical Simulation of Electromagnetic Phenomena and Solidification under a Pulsed Magnetic Field
Effects of Different Mold Temperature on Dendrite Morphology of Sn-Bi Alloy in Directional Solidification
Microstructure and Mechanical Properties of TiB2/ Al-Si Composites Fabricated by TIG Wire and Arc Additive Manufacturing
Effects of Hot-Rolled Process and Heat Treatment on Microstructure and Mechanical Properties of Ti-6Al-4V ELI Alloy
Effect of Preparation Process on Surface Quality and Microstructure of Titanium Sheet
Effect of Lubrication Conditions on the Forming Limit of Deep Drawing of 6061 Aluminum Alloy Sheet
Multi-Scale Microstructure Regulation Technology of Near-? High Temperature Titanium Alloy
Effect of Processing Techniques on the Mechanical Property of New Zirconium Alloy Strip
Effect of Ultrasonic Impact Treatment on the Residual Stress Distribution of Electron Beam Welded TA15/BTi-6431S Dissimilar Titanium Alloys
Influence Mechanism of Cu on High Temperature Oxidation Behavior of Titanium Alloys
Fatigue Crack Growth Behaviors in Novel TC32 Titanium Alloy with Bimodal and Basket-Wave Microstructures
Combustion Microstructures and Frictional Ignition Resistance of Ti-6Al-4V Titanium Alloy
High Temperature Deformation Behavior in the Isothermal Compression of Ti-5Al-4Mo-2Cr-4Zr-2Sn-1Fe Alloy
Influence of Different Surface Treatments on Fatigue Life of 7050 Al Alloy
Thermodynamic Study on Equilibrium Phases in Nickel-Base Single Crystal Superalloys
Numerical Simulation of Dendrite Growth and Micro Segregation of Ni-Cu Alloy
High Compressibility ZrTiHfV0.5Nb0.5CX Refractory High-Entropy Alloys
Phase Stability and Mechanical Properties of FCC Structural CoCrCu0.5FeNi High-Entropy Alloy with Silicon or Boron Addition
Interfacial Reaction of CoCrFeNi High Entropy Alloy in Molten Al
Selective Laser Melting of Multi-Principal NiCrWFeTi Alloy: Processing, Microstructure and Performance
Chapter 2: Properties and Processing Technologies of Steels and Structural Metals
Influence of Cold Rolling Reduction on Microstructure and Mechanical Properties in 204C2 Austenitic Stainless Steel
Effect of Primary Annealing Temperature on Primary and Secondary Recrystallization in Strip-Cast Grain-Oriented Silicon Steel
The Effects of Current Density on Microstructure and Properties of Electrolytic Copper Foils
High-Precision Section Control Technology for High-Strength Yoke Steel Strip
Effect of Annealing Treatment on Microstructure, Mechanical and Damping Properties of Ductile Iron
Evolution of Grain Boundary Character Distribution in Pure Copper during Low-Strain Thermomechanical Processing
Optimization Technology of Roll Contours during Skin-Pass Rolling Process of Hot-Rolled Strip
Physical Modeling of Flow Stress during the Hot Deformation of Nb Steels
Microscopic Failure Mechanism of Zinc Layer in Galvanized Sheet during Sheet Forming Process
Hot Ductility Behavior of 9SiCr Alloy Tool Steel by Thin Slab Casting
Effect of Hot Rolling Process Parameters on Microstructure Transformation and Microstructure of 45MnSiV Steel
Study on Continuous Cooling Transformation and Microstructure of 500 Mpa Grade Steel for Railway Freight Car Body
Microstructure and Mechanical Properties of Ferritic Rolling Low Carbon Steel
Effect of Process Parameters on Microstructure and Properties of 1500 MPa Grade Hot Formed Steel without Boron but Containing Niobium
Causes and Control Mechanism of Abnormal Structure in the Center of SWRH82B Wire-Rod-Steel
Continuous Cooling Phase Transformation Rule of 20CrMnTi Low-Carbon Alloy Steel
Solution Treatment of 20LH5 Chromium-Manganese Austenitic Stainless Steel
Titanium Nitride and Niobium Carbide in the Ferritic Stainless Steel and the Influence to Casting Macrostructure
Simulation Experimental Study on Ferrite Rolling Process of Low-Carbon Steels
Effect of Annealing Processes on Microstructures and Mechanical Properties of Medium Mn Steel
Achievements of Endless Strip Production in Rizhao Steel
Optimization of Quenching Process Parameters of 15CrNiMo Steel Used for Roller Bit Bits
Effect of Austenitizing Temperature on the Quenching Microstructure and Properties of 51CrV4
Effect of Rare Earth Elements on the Inclusion Behavior in Low Alloy Structural Steel
Effect of Heat Treatment on the Precipitation Behavior and Hardness of the Second Phase of 0Cr21Mn17Mo3N0.8 High Nitrogen Alloys
Study of Helium Bubble Induced Hardening in BCC-Fe by Molecular Dynamics Simulation
Chapter 3: Surface Engineering and Wear Resistance of Machine Parts
Relationship between Corrosion Resistance and Microstructure of Copper-Nickel Alloy Pipes in Marine Engineering
Corrosion Behavior and Mechanism of Heat-Resistant Steel T91 in High-Temperature Carbon Dioxide Environment
Analysis of Transverse Cracks Forming in a Railway Axle
Service Temperature Evaluation of Cast K465 Superalloy Turbine Vane Based on Microstructural Evolution
Effects of Gas Film Hole on Mechanical Property and Oxidative Damage of Turbine Blades
Fractal Characterization of Relative Movement Modes in Simulated Friction and Wear Tests
Anti-Oxidation Performance on Graphite Prepared by Plasma Electrolysis Technology
Typical Failure Forms and Cause Analysis of High Speed Railway Wheels
Microstructure and Mechanical Properties of Aluminum Alloy/High Strength Steel Double Beam Laser Deep Penetration Welded Joint
Effect of LBE Corrosion on Surface Wettability of Ti3SiC2 at 450 degreesC
Effect of Precipitate on Thermal Aging Effect of 17-4PH Martensitic Stainless Steel Used as Valve Stem in Nuclear Power Plant
Technology and Antimicrobial Properties of Cu/TiB2 Composite Coating on 304 Steel Surface Prepared by Laser Cladding
Corrosion Behavior and Oxide Films of New Zirconium Cladding Corroded at Different Conditions
Effect of Final Annealing Temperature on Corrosion Resistance of SZA-6 Zirconium Alloy Cladding Tubes
Formation and Properties of Fe-Based Amorphous/Nanocrystalline Alloy Coating Prepared by Wire Arc Spraying Process
Chapter 4: Nanomaterials and Advanced Functional Materials
Properties of PP Wood-Plastic Composites with Biocompatibility Additives
Preparation and Properties of Reflective Heating Polyethylene Terephthalate Fiber
Effect on Properties of Corn Straw Fibers Reinforced Polypropylene Composites
Crystal Structure and Multiferroic Behaviors of Solid Solution (1-y)BiFe(1-x)MnxO3-yBaTiO3
Effect of SiC Additions on Microstructure Evolution and Mechanical Properties of W-Based Composite Prepared by Arc-Melting
Tough Hydrogels Based on Macromicelles as Crosslinkers with pH and Ion Sensitive Properties
Continuous Fabrication of Temperature-Responsive Hydrogel Fibers with Bilayer Structure by Microfluidic Spinning
The Bending Behavior of Porous Titanium Manufactured Using a Novel Spherical Space Holder
Preparation and Characterization of pH Responsive Complex Micelles with Dynamic Boronate Cross-Linking
Deformation and Residual Stress Measurement of Alumina Ceramics after Dynamic Impacts
Microstructures and Properties of Spinning for Silicon Carbide Particle Reinforced Aluminum Composite
Laser-MIG Hybrid Keyhole Welded 6mm Steel/Aluminum Butt Joints
Joints Properties of Aluminum Foams/Aluminum Plate by Transient Liquid Phase Bonding Process
Effect of the Gamma-Ray Irradiation on the Properties of an Epoxy Encapsulant
Defect Engineering in Antimony Telluride Phase-Change Materials
Activation Process and Mechanism of ZrCoCe Getter Films
Preparation and Characterization of Ni/ZrCoCe Stack Getter Films
Magnetic Anisotropy in [Pt/Co]4/MgO/[Co/Pt]2 Multilayers
Characterization and Mechanism Analysis of Growth Bands in Chemical Vapor Deposited ZnS
Development and Potential Application of Advanced Functional Materials in the Oil Field
Preparation of Porous CoS2 Nanostructures for Highly Efficient Electrocatalytic Hydrogen Evolution
Micromorphology and Characterization of V2O3 Nanoparticles Produced by the Liquid Phase Reduction-Heat Treatment
A Strategy to Improve O2 Gas Response of La-SnO2 Nanofibers Based Sensor through Temperature Modulation
Technical Study on Preparation of Co/C Composite Nanofibers via Electrospinning
Preparation of Pd@Gr Composite Materials and Research on Catalytic Performance
Diffusion Phenomenon of Cathode Components in YSZ Electrolyte and Effect on Mechanical Properties of SOFC
Preparation and Antibacterial Properties of Silver Nanowires
Preparation of High Sphericity Li2TiO3 Tritium Breeder by Polymer Assisted Sedimentation Method
Effect of Fluorine-Containing Additive on the Electrochemical Properties of Silicon Anode for Lithium-Ion Batteries
Effect of Nickel-Modified SiC Particles on Compressive Damage of SiCp / 7075 Composites
Influence of Calcination Temperature on Structure and Electrochemical Behavior of LiNi0.83 Co0.11Mn0.06O2 Cathodes for Lithium-Ion Batteries
A Novel Electrochemiluminscence Sensor for the Detection of Butyl Hydroxy Anisd and Gallic Acid Based on Graphene Quantum Dots
Brief Analysis on Application of PVC Foam Materials in Building Material Industry
Preparation of EVA Emulsion Self-Healing Capsules for Concrete and Evaluation of Healing Properties
Chapter 5: Computational Procedures in Materials Science
Phase Field Simulation for Abnormal Growth of Grains by the In-Homogeneous Grain Boundary Energy
Research on the Springback of Square TA18 Titanium Alloy Tube on the Numerical Simulation
First-Principles Investigations on the Elastic Properties of Platinum Group Metals (Pt, Pd, and Ru)
A Mathematical Model on Macro-Segregation Formation for Popular Bloom Continuous Casting Process
Numerical Simulation of Stagger Spinning for D406A High-Strength Steel
A Phase-Field Model for Multilayered Heterostructure Morphology
Chapter 6: Materials and Technologies in Production and Exploitation of Tubular Goods
Study of Temperature Effect on the High Performance of OCTG Used for Deep and Ultra-Deep Well
Development and Application of Sour Service Pipeline Steel with Low Manganese Content
Corrosion Behavior of P110S Oil Pipe in Simulated Working Condition
Mechanical Properties of Girth Weld with Different Butt Materials Severed for Natural Gas Station
Tubing String Thread Sealing Surfaces Damage Evaluation Based on Acoustic Elasticity Theory
Simulation Analysis of the Pressure Carrying Capacity of X80 Pipe with Plain Dents
Microscopic Study on Mechanical Properties of Different Microregions during In-Service Welding
Effect of Type B Steel Sleeve Rehabilitate Girth Weld Defect on the Microstructure and Property of X80 Pipeline
Corrosion Behavior and Safety Analysis of 80S Steel in H2S/CO2 Environment
Pressure Capacity Study of ?100 Reinforced Thermoplastic Pipe
Combination Application Strategy of Non-Metal Compound Pipe and its Verification
Influence of Heterogeneous Reservoirs with Different Depths on Casing Deformation in Fuling Area
Deformation Stability of a Low-Cost Titanium Alloy Used for Petroleum Drilling Pipe
Status and Influence of Shale Gas Well Integrity Failure
Horizontal well of Shale Gas Complex Fracturing Casing Failure Mechanism
Research Status and Development of Titanium Alloy Drill Pipes
The Erosion-Corrosion Behaviors of the Full-Scale PFF78-70 Flat Valve and P110SS Tubing
Experimental Analysis on Mechanical Properties of Perforated Casing in Complex Fracturing
Development of Characterization and Analysis Methods for Graphene Modified Coatings for Tubing
Failure Analysis on Leakage of the Circumferential Weld of Steel 20 Buried Pipeline
Fracture Toughness and Application of X80 Pipeline Steel
Study on Welding Techniques of 316L Lined Bimetallic Pipe
Technical and Economic Analysis on Bimetallic Clad Pipes for Sour Service
Corrosion Strength Analysis of Casing in Offshore Thermal Recovery Wells
Application of 0.8 Design Factor in China Gas Pipeline
Research on Drill Pipe's Fatigue Life Prediction Based on Reliability
Changes in Corrosion of X70 Steel in Water-Saturated Supercritical CO2 System Caused by Impurity
Casing Shear Deformation Analysis of Shale Gas well Based on Shale Formation Strength Reduction Method
Research on Design of Polycrystalline Diamond Composite Pendulum Wear-Resistant Belt
Influence of the Riser Boost Line on the Thermal Stress of Riser in Deepwater Drilling
Casing Shear Deformation Based on Micro Seismic Data
Influence of Casing Pressure Test on Seal Integrity of Cementing First Interface
Influence of the Characteristics of Cement Plug on well Integrity for Offshore Abandonment
Corrosion Behavior Research of Aluminized N80 Tubing in Water Injection Well
Characteristic Analysis of Downhole Pressure Signal while Drilling under Drillstring Washout Conditions
Analytical Method to Evaluate Casing Stress during Multi-Fracturing for Shale Gas Wells
Erosion Law of Inner Drill Pipe in Reelwell Reverse Circulation Directional Drilling
Low Cycle Fatigue Behavior of N80Q Steel under the Influence of Mean Strains
Nitrates Induced Stress Corrosion Cracking in Tubing Connections from Oil Well
Properties of CT130 Grade Coiled Tubing
Stress Analysis and Microstructure Evolution of Titanium Alloy Pipe during Flattening Processing
Stress Analysis of Hollow Proppant Based on Finite Element Method
Mechanical Properties and Microstructure of Epoxy Resin Enhanced Oil-Well Cement Stone
Chapter 7: Materials and Technologies for Environmental Engineering and Waste Recycling
Preparation of Non-Fluorine Glass Ceramics from Modified Molten Blast Furnace Slag
Adsorption of Congo Red from Aqueous Solution Using La/MFA Composite as Adsorbent
Life Cycle Assessment of Lead Production in China
Life Cycle Assessment of Erbium Oxide and Scandium Oxide
Life Cycle Assessment of Tungsten Production in China
Fabrication of 1D Nanometer Tungsten Trioxide under Different Solvent System
Study on Typical Visible Light Photocatalytic Liquid under the Life Cycle Assessment
Study of Technical Specification Development for Ready-Mixed Concrete Type III Environmental Declarations
Effect of Chemical Composition on the Properties of Reconstructed Steel Slag
Effect of Chelating Additive on Pore Structure and Mechanical Property of Mortar under Different Curing Conditions
Preparation of Regenerated Cathode Material Lithium Nickel Cobalt Oxide LiNi0.7Co0.3O2 Form Spent Lithium-Ion Battery
Study on Movement of Particles in RF Plasma Deposition Process
Synthesis and Preparation of Al-MCM-41 Mesoporous Materials Using Oil Shale Residue
Numerical Simulation of Internal Flow Field in Blast Furnace Slag Dry Granulating Device
Analysis of the Volatile Organic Compounds (VOCs) during the Regeneration of Post-Consumed Poly(Ethylene Terephthalate) Using HS-GC-MS Method
Effect of the Cement Raw Meal Rate Value on SNCR deNOx Efficiency with NH3 as Reducing Agent
Investigation of Volatile Organic Compounds from the Manufacturing Process of Recycled PET Fibers Using TGA-DTA/MS Technique
Effect of Warm Mix Agent on Physical and Aging Properties of Crumb Rubber Modified Bitumen
A Novel Approach for the Recycling and Reusing of Silicon Slurry Waste
Analysis of Mechanical Performance and Microstructure of Steel Slag Processed with Accelerated Carbonation
Preparation and Properties of SBS Modified Deoiled Asphalt and Slurry Blends
Research Status of Recovery of Indium from Indium-Tin Oxide (ITO) Targets
Phase Separation of Fe-Cu-Pb Alloy and Recycling of Mixed Metals in Waste Printed Circuit Boards