Basic Research of Materials

Preface
Symposium S: Materials for Mechanical Engineering and Processing Technology
Study on Composite Interface of 4045/3003 by Cladding Casting
Effects of Hardening Models on CUO Forming and Springback Simulation of High Strength Line Pipes
A Phase-Field Model for Rapid Solidification with Non-Equilibrium Solute Diffusion
Hot Tearing Evaluation and Contraction Behaviors of Four AA7xxx Alloys
Investigation of Tungsten/Steel Brazing Using Nb Interlayer
High-Strain-Rate Response of a Specially-Made Copper Sample
Al-Si Alloy Foam Prepared by Two Step Foaming Method
Application Research of a New Coupling Stirring on DC Casting Process for Large-Sized Aluminum Ingots
High Temperature High Strain-Rate Tensile and Compressive Deformation Behaviors of Cu-Zn-Sn-Al Alloy
Effect of Squeeze Casting and Solution Treatment on the Microstructure and Properties of ZA27 Worm Wheel
Oxidation-Induced Cu Coating on Steel Surface
Superhydrophobic Surface Prepared by Organic-Inorganic Hybrid Material on Plasma Spraying Al2O3+13wt. %TiO2 Ceramic Coating
Effect of Fe Content on Microstructures and Mechanical Properties of the Heat-Treated Squeeze Cast Al-5.0Cu-0.6Mn Alloy
Effect of Double Shot Peening on Room-Temperature Notched Fatigue Property of TC4 Titanium Alloy
Research and Preparation of Silver Free Amorphous Active Brazing Alloy
Effect of Pulse Current on the Microstructure of Tungsten Electrode in Tensile Process
Effect of Alloying Elements and Heating Parameters on the Hardness of Quenched and Tempered Steel 42CrMo after Induction Hardening
Network Carbide Inheritance during Heat Treatment Process of Large Shield Machine Bearing Steel GCr15SiMn
Effect of Niobium Additions on Austenite Grain Coarsening Behavior of GCr15 Bearing Steel
Effect of Alloying Elements on Mechanical Properties of Al-Si-Cu-Mg Cast Alloys
Surface Decarburization Behavior of Spring Steel 60Si2MnA under AC1 Temperature and in Temperature Range AC3-G
Thermal Stability of Microstructure and Mechanical Properties of NbNhard Films
Effect of Nitrogen Content on Mechanical and Tribological Properties of HfCxNy Films Deposited by Reactive Magnetron Sputtering
Effect of Cu Content on the Formability and Portevin-Le Chatelier Effect of Al-Mg Alloys
Influence of Air Heat Treatment on Bonding Strength and Microstructure of Al2O3-13wt%TiO2/NiCrAl Coating
Review of Research Progress of Prestressed Treatment to the Thick-Walled Cylindrical Parts
Effect of Reheating Process on Microstructure and Mechanical Property of A390 Aluminum Alloy
Influence of Materials Ratio on the Hydration Process of Magnesium Oxychloride Cement
Characterization of Solution Treatment on AA7A55 Alloy
Effects of Rare Earth on Microstructure and Mechanical Properties of Al-3.2Mg Alloy
Analysis on the Influencing Factors of Heat Transfer for the Slot Nozzle Convection Impact in Rolled Strip Preposition Ultra-Fast Cooling
Adsorption Behavior of Thiadiazole as Corrosion Inhibitors on Copper Surface
Effect of Post-Welded Heat Treatments on Microstructure and Mechanical Properties of Friction Stir Welded Joints of 7A04-O Aluminum Alloy
Study on the Lubricating Performance of Nano-TiO2 in Water-Based Cold Rolling Fluid
Investigation on the Corrosion Behavior of Emulsion on the Cold-Rolled Silicon Steel Surface
Effect of Heat Treatment Processing Parameters on the Microstructure and Properties of Low-Carbon Cr-Ni-Mo Carburizing Bearing Steels
Research on Microstructure and Properties of Base Metal and Weld of Electron Beam Welding 0.30C-Cr-W Steel
Microstructure and Tensile Deformation Behavior of a Hot-Rolled Directly Quenched and Dynamically Partitioned Steel Containing Proeutectoid Ferrite
Influence of Fly Ash on Magnesium Oxychloride Cement Deformation
Microstructures and Mechanical Properties of High Strength Low Carbon Bainitic Steel
Recovery and Recrystallization Behavior of Large Sized ? Phase Grains in TC18 Titanium Alloy during Annealing Process
Study on Continuous Annealing Process for Ultrathin Cold-Rolled SPCC Steel
Research on a New Type of Martensite Stainless Steel Electrode Used for Hardfacing
Research on the Microstructure and Microhardness of 9Cr18 Semi-Solid Billet
Effect of Annealing Temperature on Microstructures and Mechanical Properties of 1000MPa Grade Cold Rolling High-Strength Steel on Ultra-Fast Cooling Condition
Research on Fluctuations in Work Hardening Rate of a Fe-Mn-Al-C Steel
Microstructures and Properties of Low-Density High Strength-Toughness Fe-18Mn-9.5Al-0.65C Steel
Dendritic Growth Characteristics of Cu-Rich Zone within Phase Separated Fe50Cu50 Alloy
Effect of Ti Element on Microstructure and Properties of Cu-Cr Alloy
Influence of the Weld Heat Input on the Electrochemical Behavior of the 921A High Strength Steel Welding Joints
Effect of Solute Atoms on the Thermal Property of Mg Alloys
Phase Selection in Sub-Rapidly Solidified Au-20Sn Alloys
Effect of Al-5Ti-1B Grain Refiner on Microstructure and Mechanical Properties of 7075 Aluminum Alloy
Study on A-TIG Welding Technology for 12 mm Thick 304 Stainless Steel Plate
Study on the Laser Precision Cutting System and Stainless Steel Microporous Cutting Technology
Development and Application of Tungsten Electrode Materials
Solidification Structure of 6063 Alloy under Pulsed Magnetic Field
Effect of Multi-Forging Condition on Deformed Structure and Mechanical Properties of A 99.995 Percent High Purity Aluminum
Hot Tensile Deformation Behaviors of an AISI 316LN Stainless Steel
Comparison Study on Friction-Welded Cu-Al Material and Pure Cu/Al
Si Purity Control and Separation from Solidification of Al-30Si Melt under Pulse Electromagnetic Field
Influence of Work Media on Surface Property of Compacted Graphite Cast Iron Processed by Laser Local Processing
Effect of Pulse Current on the Plastic Deformation Behavior of Tungsten
Optimizing Homogenization Heat Treatment of Al-Zn-Mg-Cu-Zr-0.15Er Alloy
Arrhenius-Type Constitutive Model for 316LN Stainless Steel during Hot Deformation
Grain Refinement of Pure Al by Inoculation and Rotating Magnetic Field
Development of Hot Rolled Strips for Internal Plates of Automobile
Microstructure and High-Temperature Oxidation of Ni-Si3N4 Composite Coatings by Pulse Electrodeposition
Fe-Simulation of Hot Continuous Rolling of 40Cr Alloy Steel Round Bar and Roll Pass Design
Modeling and Simulation of Influence of Solidification Velocity on the Structure of Porous Copper and Aluminum
Microstructure and Mechanical Properties of TRIP-Aided Steels with Different Heat Treatments
Dynamic Recrystallization Behavior of a New Lead-Free Machinable Brass during Hot Deformation
Microstructure, Corrosion and Wear Resistance of Co-Ni-ZrO2 Composite Coating
Effect of Ausforming Temperature on Bainite Transformation of High Carbon Low Alloy Steel
Influence of Magnetic Field on the Microstructure and Properties of Cu-Ag-Zr Alloy
TiN/AlN Nano Multilayers Film Fabricated by Plasma Enhanced Atomic Layer Deposition
Heat Treatment of 10Cr12Ni3Mo2VN Blade Steel for Ultra Supercritical Unit
Influence of SiC Content and Heat Treatment on the Corrosion Resis-Tance and Oxidation Resistance of Ni-P-SiC Composite Coating
Effect of Sample Size on Microstructure and Mechanical Properties of OFHC Copper Processed by Equal Channel Angular Pressing
Effects of Heat Treatment on Mechanical Properties of Ni-P-CNT Composite Coating
Splitting Property Analysis of Automotive Con-Rod Steel C70S6
Manufacture of Aluminum Foam without Thickening Agent via Melt Foaming Method and its Compressive Behavior
An Advanced Metal Deposition Technique-Kinetic Metallization
Influence of Strain Rate on Recrystallization Behavior of High Purity Aluminum by Tube High-Pressure Shearing
Robust Design of UOE Forming Process Based on Support Vector Machine
Extrusion Simulation and Texture Study on Mg-Y Alloy
Simulation of the Extrusion Texture of Magnesium Alloy AZ31 Using Crystal Plasticity Finite Element Method
Influence of Electromagnetic Force on Solidification of Cu-Cr-Zr Alloy
The Extrusion Cracks of Inconel 625 Superalloy Tubes Caused by the Primary MC Carbides
Differential Scanning Calorimetry Studies on Ni-Ni3B Alloys
Effect of Mo on Transformation, Microstructure and Property of Hot-Rolled DP600 Steel
Influence of FeCrAl Coating Arc Sprayed on Aluminum Corrosion Resistance of H13 Steel
Wear Resistance of Cu10Al5Fe5Ni Alloy
Precipitation Process and Mechanical Properties of an Elastic Cu-Ni-Mn Alloy
Effects of Additives on the Properties of SiO2-B2O3-Al2O3-Na2O-PbO System Glass Powders
Effect of Porosity on Mechanical Properties of Ti-5Al-2.5Sn ELI Alloy from Atomized Powder
Electro-Less Ni-P Plating Coating of In Situ TiCp/Al-4.5wt.%Cu Vomposites
Microstructure Evolution at the Diffusion Bonding Interface of High Nb Containing TiAl Alloy
Effect of Container on the Microstructure and Properties of Powder Metallurgy TiAl Alloys
Simulation of Container Design for Powder Metallurgy Titanium Components through Hot-Isostatic-Pressing
Preparation and Properties of Ti-47Al-2Cr-2Nb-0.15B Alloy by Powder Metallurgy Route
Mg Alloy Foam Fabrication via Powder Metallurgy and its Compressive Behavior
Deformation-Induced Solid-State Amorphization in a Nanostructured Al-Mg Alloy Processed by High Pressure Torsion
Structural and Crystallization Characteristics of Cu-Based Metallic Glass Powders Produced by Gas Atomization
Study of Bonding Technology and Property of Foam-Sandwich Co-Bulkhead of Cryogenic Tank on Launch Vehicle
Effect of Cold Rolling and Heat Treatment on Microstructure and Mechanical Properties of Pt-0.7Ti Microalloy
Symposium T: Materials Modeling and Simulation
A Temperature Field Analysis for Contraction and Collapse of 72AU2 Hot-Rolled Steel
Investigation of the Wear Behavior of High Strength and High Conductivity Cu-Cr-Zr Alloy under Dry Sliding
Effects of Microstructure Transformation on Strengthening and Toughening for Heat-Treated Low Carbon Martensite Stainless Bearing Steel
Hydrogen Isotopic Effects of Uranium Hydrides: First-Principles Calculations
Finite Element Analysis of Removable Shape Memory Alloy Pipe Joint's Cone Sealing Performance
Stability and Electronic Structures of Mg2Pb (100), (110) and (111) Surfaces
Finite Element Analysis of the Influence of Crack Tip Stress Distributionon Fatigue Crack Propagation Rate of 5XXX Aluminum Alloy
Indenter Size Effect on the Reversible Incipient Plasticity of Al (001) Surface Studied via Quasicontinuum Simulations
Strain Fields around Dislocation Cores Studied by Analyzing Coordinates of Discrete Atoms
First-Principles Study of Structural and Thermal of ?-Ni4N
Application of Artificial Neural Networks to Optimize Processing - Properties of Ni-Tic Composite Coatings
Mesoscopic Simulation of the Ferrite Nucleation on Austenitic Grain Boundary for Nanograined Steel
Simulating Structural Transformation of a Cu1553 Nanoparticle on Heating at Atomic Scale
Thermal Properties and Transition Temperatures of AlB2-Type Diborides
Modeling of Flow Stress and Grain Size Based on Z Parameter and Material Constants of Al-5.2Mg-0.6Mn Alloy during Hot Deformation
Characteristics of the Dead Zones in RH Desgasser with Simulation Methods
Simulation of the Effect of Sintering and Interface on the Failure Mechanism of Thermal Barrier Coatings
Evaluation of the Surface Tension of Silicon-Gold Binary Liquid Alloy
First-Principle Investigation on the Secondary Bond in Stable mGeTe?nSb2Te3 Pseudo-Binary Chalcogenides
Study of Magnetic Properties for Fe Nanoring with Different Degree of Eccentricity
Characterization of Crack Initiation Life in Ferromagnetic Material by Metal Magnetic Memory Testing
Influence of Carbon Nanotube Aspect Ratio on Glass Transition Temperature of Polymers: A Molecular Dynamics Simulation Study
Diffusion of Epoxy Molecules on the Chemically Modified Graphene: A Molecular Dynamics Simulation Study
Computer Simulation of the Early Stage of Precipitation of L12-Ni3(Al,V) Using Microscopic Phase Field Method
Elastic Properties and Electronic Structures of L12-TiAl3 and L12-Ti(Al,Pt)3: A Density Functional Theory Investigation
Vacuum Arc Remelting Process of High-Alloy Bearing Steel and Multi-Scale Control of Solidification Structure