Advanced Structural Materials, IUMRS-ICA 2010

Preface and Sponsors
Magnesium
Research of Short-Flow-Route Processes for Magnesium Alloys Prepared by Crystalline Magnesium
A Morphology Observation of ?-Mg17Al12 Phase in AZ80 Magnesium Alloy Subjected to Hot Compression Deformation under Different Conditions
Corrosion Behaviour of Mg-7.3Al Alloy in Buffered Chloride Solutions
Corrosion Performance Study of Anodic Film Formed by Oxidizing Magnesium Alloy in Environmentally Friendly Electrolyte
Corrosion Resistance of Modified Silane Films Formed on AZ31 Magnesium Alloys
Direct Chill Casting of ?500mm ZK60 Magnesium Alloy Billets under Low Frequency Electromagnetic Field
Effect of Calcium and Strontium on Microstructure of AZ31 Wrought Magnesium Alloys
Effect of Clock Rolling on Microstructures and Properties of AZ31 Magnesium Alloy Sheets
Effect of Composite Energy-Field on Microstructure and Properties of AZ31B Magnesium Roll-Casting Alloy Sheet
Effect of Cryogenic Treatment on the Microstructure and Mechanical Properties of AZ31 Magnesium Alloy
Effect of Processing on Density of Mg-6Zn-0.5Y Alloy
Effect of Heating Rates and Loading Rates on Mechanical Behaviors of Magnesium Alloy
Effect of Initial Microstructure on Deformation Mechanisms of AZ31 Magnesium Alloy
Effect of Melt Superheating Treatment on the Microstructure of as Cast AZ61 Magnesium Alloy
Effect of 1% Ce Addition on Microstructures and Mechanical Properties of As-Cast Mg-3.8Zn-2.2Ca (wt.%) Magnesium Alloy
Effect of Sr on Microstructure and Mechanical Properties of Mg-9Li-3Al Alloy
Effect of the Rolling Process on Microstructures and Mechanical Properties of the Extruded LA91 Alloy Sheet
Effect of Zn/Er Ratio on Microstructures and Mechanical Properties of the Cast Mg-Zn-Er Alloys
Effects of Annealing Treatment on Texture and Stamping Properties of AZ31 Magnesium Alloy
Effects of Gallium Addition on the Microstructure and Electrochemical Properties of Al-Zn-Bi Series Alloy Anode
Effects of Microstructural Morphology on Mechanical Properties of Magnesium Alloys
Effects of Sr Addition on Mechanical Properties and Microstructure of Mg-6Al Magnesium Alloy
Effects of Sr Addition on as Cast Microstructure of AS31 Alloy
Effects of Ultrasound on the Microstructures and Mechanical Properties of Cast-Rolling AZ31B Magnesium Alloy Strip
Evaluation on Vibration Property of Magnesium Honeycomb Panels
Flow Behavior and Microstructural Evolution of ZW61 Alloy during Hot Compressive Deformation
Galvanic Corrosion Behavior and Three Protection Techniques of Magnesium Alloy Coupled to A6N01S-T5 Aluminum Alloy in NaCl Solution
Grain Re?nement of Magnesium Alloy AZ31 by Repeated Cold Rolling and Annealing
High Cycle Fatigue Behavior of Gravity Cast AZ91D Magnesium Alloy
High Strain Rate Compression Behavior and Constitutive Relation of As-Extruded Mg-Gd-Y Magnesium Alloy
High Temperature Deformation Behaviour and Processing Maps of AZ81 Magnesium Alloy
Influence of Additive on Structure and Corrosion Resistance of Manganese Phosphate Film on AZ91 Magnesium Alloy
Influence of Cl- on Corrosion Behavior of AZ91 Magnesium Alloy in Simulating Acid Rain
Influence of Silane on Corrosion Performance of Silane-Modified Acrylate Interpenetrating Polymer Network Coating on Magnesium Alloy AZ31
Interpretation of Crystallographic Morphologies of Precipitates in Mg Alloys with a Secondary CCSL Model
Laser Cladding of Ni-Based Alloy on Mg Alloy with Brass Transition
Low Cycle Fatigue Behavior of As-Extruded AZ31 Magnesium Alloy
Mechanical Behaviors of Magnesium Alloy AZ61 under Different Strain Rates and Heating Rates
Mechanical Properties and Microstructure Evolution of AZ31 Magnesium Alloy Sheet Subjected to High Strain Rates Loading of Different Orientations
Mechanical Properties and Microstructure of AZ31 Magnesium Alloy under Uni-Axial Tensile Loading
Ultimate Strength and Plasticity of Magnesium Alloy under Different Temperatures and Strain Rates
Microstructure and Corrosion Resistance of AM60 Magnesium Alloy Modified by Plasma Surface Treatment
Microstructure and Mechanical Properties of MgMnAlZnCu High Entropy Alloy Cooling in Three Conditions
Microstructure and Mechanical Properties of Quasicrystal Reinforced Magnesium Matrix Composites
Microstructure and Solidification Behavior of Permanent-Mould-Cast Mg-9Li-3Al-XSr Magnesium Alloy
Microstructures and Mechanical Properties of AJ62 Magnesium Alloy with Y and Nd Elements
Microstructures and Mechanical Properties of As-Cast and Extruded Mg-2wt.%Zn Alloy Containing Dilute Content of Misch Metal
Microstructures and Mechanical Properties of Heat-Resistant High-Pressure Die-Cast Mg-4Al-6RE-0.3Mn (RE= La, Ce, Pr, Nd, Wt.%) Alloys
Observation of Microstructural Refinement in Mg-3Sn-2Ca Magnesium Alloy Containing Minor Sr
Effect of Nd Addition on a Mg-Zn-Bi Magnesium Alloy
Photocatalystic Cathodic Protection of TiO2 Coating on AZ31 Magnesium Alloy
Preparation of Mg-Cu-Y and Mg-Ni-Gd Based Amorphous Brazing Material
Research on Corrosion Resistance of AZ91D Magnesium Alloy Coated with Epoxy Resin
Research on Heat Transfer during LFEC Processing by In Situ Temperature Measurement
Researches on a Composite Extrusion Approach Based on FEM Method and Experiments
Solute Distribution and Segregation during Solidification of Mg-6Al Alloys
Structure and Magnetic Properties of MgFe2O4 Nanoparticles Prepared by the Low-Temperature Solid-State Reaction Method
Study of Aluminum Coating Thermally Sprayed on AZ80 Magnesium Alloy Surface
Study of the Microstructure of AZ31B Magnesium Alloy under High Strain Rate Deformation
Study on the Corrosion Resistance of Magnesium Alloy AZ81 with Rare Earth
Study to Yield and Uniformity of Mn in High-Mn Contained Mg-Mn Master Alloy Prepared by Stirring Cast
Superplastic Forming Limit and Instability of AZ31B Sheet
The Effects of Al-Ca Compounds on Grain Refinement of Mg-Ca Alloys
The Evaporation Effect of Front Keyhole Wall in Penetration Welding with an Electron Beam
Influence of Forward Extrusion on the Mechanical Properties and Microstructure of Homogenized AZ80 Magnesium Alloy
The Tendency of Oxide Inclusion on Magnesium Alloys Intake Manifold in Tilt Cast
Thermal Analysis during Solidification of Mg-4%.wtAl Alloy during Lost Foam Casting Process
Thermodynamics of In Situ Formation of Mg2Si and MgO in AZ91D /Flyash Composites
Wear Resistance Property of AM60 Magnesium Alloy Modified by Plasma Surface Treatment
Structural Composite Materials
Phase Equilibria in Co-Rich Co-Al-W Alloys at 1300 degreesC and 900 degreesC
A Simplified Method of Synthesis and Purification of 4-Dimethylamino-N-Methyl -4-Stilbazolium Tosylate
Effect of Hot Pressing Technology on the Microstructure and Mechanical Properties of ZrO2 Nano-Composite Ceramic Tool and Die Material
Effects of Load and Sliding Distance on the Wear Properties of Hybrid Friction Materials
Microstructural Model of Enveloping-Core Fiber Distribution of Conifer Wood and Research on Biomimetic Wood Composite
Experimental Study on Mechanical Properties of X-Cor Sandwich
Fabrication and Properties of Cf/SiC Composites Derived from Polysiloxane Precursor
Fabrication of Alumina Composite Ceramics with High Addition of Carbon Nanotubes
Model and Maximal Pull-Out Force of Helicoidal Fiber Structure in the Underpinnings of Tumblebug Cuticle
Influence of Nano-SiO2 on the Strength of High Performance Concrete
Preparation of CNTs/PANi Core/Shell-Structured Nanowires and Improvement of Sensitivity of Chemical Sensors
Preparation of Ultrafine White Cement and its Hydration
Study on Foaming Behavior of Microcellular PP/Inorganic Powder Composites
Synthesis of (3-Mercaptopropyl)Trimethoxysilane-Modified ZMS and Study of the Enhancement of Ammonia-Nitrogen Removal from Water
The Thickness and the Inerior Quality of Composite Panel in the Vacuum Assisted Resin Transfer Molding Process
Well-Crystallized SnO2 Nanocrystals Homogeneously and Intimately Coated on Multiwalled Carbon Nanotubes by a Simple Surfactant-Free Hydrothermal Method
Influence of Carbon Fiber Pre-Treatments on Interlaminar Shear Strength and Fracture Behavior of C/C Composites
Advanced Processing Technologies of Materials
Effect of the LaNd Addition on Melting Point and Spreading Properties of Bi5Sb8Sn Solder Alloy
Numerical Simulation Analysis of Temperature Field on Silicon Carbide Synthesis Furnace
Preparation and Properties of Electromagnetic Absorbing of Hollow Ceramic Microspheres
Structure and Precipitation of Strip As-Cast and Hot-Rolled by TSCR on Oriented Silicon Steel
Study of Roughness for Electroplating of Composite Texture on Material Surface
Effect of the Content of LaNd on Physical Properties and Solderability of Zn20Sn6Cu Solder
High Temperature Coatings and Surface Protection
A Novel Wear Resistant Glass-Ceramic Coating Material
A Study on Linseed Oil Modified Waterborne Polyurethane Coatings
Corrosion Behavior of High-Strength Pipeline Steel and Coatings in the Simulated Sea Water Environment
Effect of Laser Power on the Microstructure of Ni-P Layer Deposited on Aluminum Substrate
Evaluation of Burnished Subsurface Mechanical Behavior Using Nanoindentation
Fabrication of Ni-Based Composite Coating Reinforced with NbC Particles by Laser Cladding
Failure of the EB-PVD TBCs of Rare Earth Zirconates
High-Temperature Oxidation Resistance of Electroless Ni-P-ZrO2 Composite Coatings
Inhibition Behavior of a Novel Acidification Inhibitor for Steels at High Temperature
Investigation of Parameters' Effect on Segmentation Cracks Formation in Zirconia Coating
Microstructure and Oxidation Behavior of Molybdenum Disilicide Coating Prepared by Air Plasma Sprayed
Microstructure and Properties of TiAlN Compound Films Fabricated on AZ91D Alloy by Magnetron Sputtering
Microstructure Features of Cold-Sprayed NiCoCrAlTaY Coating and its High Temperature Oxidation Behavior
Nitrite, Nickel-Free Electrophoretic Coating Phosphating Solution
Properties of Oxide Film on the Surface of ZrHX(x=0~2)
Properties of Sputtered NiCrAlY Used for Protective Gun Tube Coatings
Research on Cavitation and Silt Erosion Resistance of HVAF Coatings
Research on Properties of SiC Coating Inert Anode for Aluminum Electrolysis
Si-B Co-Deposition Coatings on an Nb Silicide Based Ultrahigh Temperature Alloy Prepared by Pack Cementation Technique
Improving the Bonding Strength of Y2O3 Coatings on Steel Substrates through a YOX Adhesion Layer
Study of Y2O3/Er2O3 Multilayered Coatings Deposited by Magnetron Sputtering
Study on Microstructure of Laser In Situ Formation of TiBX and TiC Titanium Composite Coatings
Surface Modification by HVOF Coating of Micron-Sized WC-Metal Powder and Laser-Heating of the Coating
Synthesis of (Ni, Co)Fe2O4-Spinel Coating Using High Temperature Oxidation Treatment of Ni-Co-Fe2O3Composite Electrodeposited Coating
The Improvement in Oxidation Resistance of Magnesia-Carbon Refractory Bricks by Al4SiC4
The Investigation of the Zirconium Silicate Coatings Prepared by APS
Thermal Corrosion Behavior of NiCoCrAlY Coatings Prepared by Different Thermal Spraying Methods
XRD and Morphologic Analysis of ?-Cristobalite Produced from Silica Mine Waste under Lower Calcination Temperature
Aero-Space Materials
Effect of Annealing on Structural and Optical Properties of Zr Doped ZnO Film Grown by RF Magnetic Sputtering
Tribological Properties of Laser Surface Texturing and Coating Duplex-Treated Surface
Influence of Boron Nitride on Tribological Behavior of Nickel-Base Composite Coatings at High Temperature
Improvement of the Electrochemical Properties of LiMn2O4 by Doping Rare Earth Element Ce
Reconditioning of Electroless Nickel Plating Bath on Magnesium Alloys
Mechanical Properties and Strengthening Mechanisms of In Situ (TiB+TiC)/Ti-1100 Composite at Elevated Temperature
Enhanced Saturation Magnetization of Nanocrystalline Cobalt Produced by Surface Mechanical Attrition Treatment
Microstructure and Magnetic Properties of Hot-Pressed and Hot-Deformed Composite Magnets Produced by Spark Plasma Sintering Method
The Interface Investigation and Tribological Mechanism of TiB2-TiC-Ni/TiAl/Ti Functionally Gradient Materials Prepared by FAPAS Process
Encapsulating and Manufacture Technology Study of Impact-Resisting, Enclosed Soft Aramid Vesicle
Preparation and Characterization of Carbon Fibre Reinforced Aluminium Matrix Composite
A New Sand Casting Process with Accelerated Solidification Rate
Effect of Structure on the Mechanical Properties of PAN-Based Carbon Fibers during Graphitization
Preparation of Polyacrylonitrile High Modulus Carbon Fibers by Catalytic Graphitization Using Boron
Characterizations of UV Aging and Atmospheric Corrosion on Epoxy Coated 7A04 Aluminum Alloy
Research and Classification of Inflatable Space Vehicle and its Materials