Material Science and Engineering Technology II
Published on 6. December 2013
400 pages
978-3-03826-344-9 (ISBN)
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Material Science and Engineering Technology (ICMSET 2013), November 16-17, 2013, London, United Kingdom.
The 72 papers are grouped as follows:
Chapter 1: Composite Materials;
Chapter 2: Chemical Materials and Technologies;
Chapter 3: Modelling and Analysis of Materials Properties and Technologies;
Chapter 4: Nanomaterials and Nanotechnologies;
Chapter 5: Advances in Energy Technology;
Chapter 6: Applied Mechanics and Mechanical Engineering
Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Material Science and Engineering Technology (ICMSET 2013), November 16-17, 2013, London, United Kingdom.
The 72 papers are grouped as follows:
Chapter 1: Composite Materials;
Chapter 2: Chemical Materials and Technologies;
Chapter 3: Modelling and Analysis of Materials Properties and Technologies;
Chapter 4: Nanomaterials and Nanotechnologies;
Chapter 5: Advances in Energy Technology;
Chapter 6: Applied Mechanics and Mechanical Engineering
More details
Series
Language
English
Place of publication
Zurich-Durnten
Switzerland
Target group
Professional and scholarly
Illustrations
Illustrations
File size
61,95 MB
ISBN-13
978-3-03826-344-9 (9783038263449)
DOI
10.4028/b-BxguG9
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Book
03/2014
Trans Tech Publications Ltd
€184.46
Shipment within 10-15 days
Software
03/2014
Trans Tech Publications Ltd
€165.22
Shipment within 10-15 days
Content
Preface, Committees and Sponsor
Chapter 1: Composite Materials
Fibrous Cerium (IV) Hydrogen Phosphate Membrane Self-Supported Benzimidazole Polymerization Agent
Polystyrene/Lamellar Germanium Phosphate Nanocomposite Membranes
Influence of Tool Geometry and Contact Condition on Friction Stir Welding of Al-Cu Laminated Composites
Ultrasound Assisted Synthesis of Visible Light Responsive Nitrogen Doped TiO2 Nano Photocatalyst
Epoxy Emulsion Modified Engineered Cementitious Composite for Enhanced Pipeline Coating
Study on the Dense-Packing Effect and Properties of Multi-Component Cementitious Material
Machinability of Short Potassium Titanate Fiber Reinforced Aluminum Alloy Composites Fabricated by Squeeze Casting
Chapter 2. Chemical Materials and Technologies
The Effect of Silver and Silver-Platinum Doped Into 5A Zeolite on the Degradation of Naptalam
Preparation and Characterization of Au/Al2O3 and Au-Fe/Al2O3 Materials, Active and Selective Catalysts in Oxidation of Cyclohexene
In Situ Growth of Zinc Oxide Nanoparticles on Cotton Fabric Using Sonochemical Method
Effect of Cold Rolling on Sensitization of 304 Stainless Steel Weldments
Synthesis, Characterization and Evaluation of Property Profile of Hybrid Ion- Exchanger
Preparation and Characterization of Activated Carbons Based on Lignocellulosic Residues
Experimental and Numerical Study of Plain-Woven Aramid Fabric
Preparation of Three Dimensional Products Using Flow Deformability of Wood Treated by Small Molecular Resins
Epoxidized Vegetable Oil as a Sustainable Ingredient in Welding Electrode Coatings
Contact Width Analysis of Corrugated Metal Gasket Based on Surface Roughness
Experimental Investigation on Nanofluids Effectiveness on Heat Transfer in Oscillating Heat Pipe
Deposition and Characterization of Electroless Ni-P/Ni-W-P Duplex Coating Using Electrochemical Impedance Spectroscopy
Experimental Study of Surface Roughness of Wood Plastic Composites after Turning
Utilization of Sulfur Waste from Petroleum Refinery for Sulfur Concrete
Conductivity and Transport Properties Study of Plasticized Carboxymethyl Cellulose (CMC) Based Solid Biopolymer Electrolytes (SBE)
Biosurfactant Producing Bacteria with Tensoactive and Emulsifying Properties Isolated from Palm Oil Mill Effluent
Enhanced Adsorption of Pb(II) on Chemically Treated Neem (Azadirachta indica) Leaf Powder
Chapter 3: Modelling and Analysis of Materials Properties and Technologies
Numerical Analysis of Nanoscale Junctionless MOSFET Including Effects of Hot-Carrier Induced Interface Charges
Cutting Simulations and Experiments of Milled SiC Particle-Reinforced Aluminum Matrix Composites
Validation of Nitinol SMA Characteristics Using Finite Element Analysis and Closed Form Solutions
Optimization of Process Parameters of Diffusing Bonding of Titanium with Titanium and Titanium with Copper
Multi Regression Analysis of Flow Curve Obtained by Torsion Test
Researches Concerning the Phenomena at the Interface for the Sintered Compacts of Titan-Hydroxyapatite
A Comparison among Polynomial Model, Reduced Polynomial Model and Ogden Model for Polyurethane Foam
Modeling and Simulation of Microwave Circuits
Numerical Simulation of Polyurethane Foaming Process Using Finite Point Method
Enhanced Efficiency of Au-Deposited BiFeO3 Nanoparticles Based Dye-Sensitized Solar Cells
Numerical Investigation of the SiGe/Si Heterostructure Including Interfacial Defects for Photovoltaic Applications
Thickness Dependence of Structural and Optical Properties of Al/ZnO Films Prepared by DC Magnetron Sputtering
Investigation on the Structural Properties of a New Prepared 0.2PZS-0.8PLZT Ceramics
Residual Stress and Microstructures Characterization in Welded Al-Si-12Cu Alloy
Hydroxyapatite Deposition onto Ti-6Al-4V Surface in Powder Mixed Electrical Discharge Machining
Steady State Conduction Behaviour of Liquid Crystalline Polyurethane
Effect of Gate Dielectrics on the Performance of P-Type Cu2O TFTs Processed at Room Temperature
CFD Study on the Role of Gas Friction on the Molten Layer Shape and Melt Removal Mechanism in Laser Cutting Process of Steel
Ti-6Al-4V Surfaces in SiC Powder Mixed Electrical Discharge Machining
Analysis of Strain Hardening Behaviour of Cast Aluminium Alloy 354 Subjected to Artificial Ageing at Various Temperatures
Effect of Melt Cooling Rate on Microstructure of Sn - Bi and Sn - Pb Eutectic Alloys
Analysis and Quantification of Grain Size of Various DHP Copper Tubes Manufacturing Processes
Evaluation of Mechanical Behaviour of Bone Cements by Using Acoustic Emission Technique
The Effect of Intercritical Deformation on Microstructure Development in Thermomechanically-Processed Low-Silicon TRIP-Assisted Steels
Evaluation of the Physical and Mechanical Properties of Ceramic Tiles Processed Using Steel Slag
Significant Atomic Displacement at Isostructural Transition in Li0.99Cu0.01CrO2 and its Effects
Modification of some Optical and Mechanical Properties of Amorphous As-S-Se Thin Films by Copper Introduction
Chapter 4: Nanomaterials and Nanotechnologies
AFM Studies of Thin Films as Nanobiosensor for Early Detection of Prostate Cancer
Strength and Microstructural Performance of Nano-SiO2 Gel (NSG) Infused Alkaline Activated Ground Blast Furnace Slag-Ultrafine Palm Oil Fuel Ash (AAGU) Based Mortar
Sol Gel Characterization of Nano Kaolin
Ultrafine Solid State Polymerized PA66 Nanofibers Fabrication via Air-Sealed Centrifuge Electrospinning (ASCES)
Structure and Magnetism of Fe/Al Nanostructures Grown by Ion-Beam Sputtering
Low Band Gap Co80Ni20@RGO Nanocomposite
Effect of Capping Agent on Physicochemical Properties of Zinc Substituted Nanoscale Hydroxyapatite
Castor Oil Based Polyurethane Nanocomposites with Cellulose Nanocrystallites Fillers
Enhancement in Thermal Property of Phase Change Microcapsule with Modified Carbon Nanotube
Chapter 5: Advances in Energy Technology
Enhancing Biogas Production from Sugarcane Bagasse Using Steam Explosion in According With Acetic Acid Pretreatment
Biogas Production from Napier Grass (Pak Chong 1) (Pennisetum purpureum x Pennisetum americanum)
Effect of Building Management System on Energy Saving
The Effect of Mixing Coal with Biomass in Solid Fuel Briquettes
Prediction of the Remaining Service Life of Superheater and Reheater Tubes in Coal-Biomass Fired Power Plants
Study on the Performance of the Organic Rankine Cycle System with Internal Heat Exchanger under Vehicle Engine Various Operating Conditions
Chapter 6: Applied Mechanics and Mechanical Engineering
Current Mode Filters Using Current Feedback Amplifiers with Negative Impedance (Resistance)
VPP Processed Variable Phase Controller for Array Antenna Scanning
Numerical Simulation of the Mechanical Structure of a Helmet Motorcyclist
The Stress Field in a Flexed Beam with an Elastoviscoplastic Behavior
The Chip in the Up and Down Milling Process
Creep Behavior of Catheter Reinforced with Braids: Analytical Simulation of Uniaxial Tension under Two-Stage Step Stress
Chapter 1: Composite Materials
Fibrous Cerium (IV) Hydrogen Phosphate Membrane Self-Supported Benzimidazole Polymerization Agent
Polystyrene/Lamellar Germanium Phosphate Nanocomposite Membranes
Influence of Tool Geometry and Contact Condition on Friction Stir Welding of Al-Cu Laminated Composites
Ultrasound Assisted Synthesis of Visible Light Responsive Nitrogen Doped TiO2 Nano Photocatalyst
Epoxy Emulsion Modified Engineered Cementitious Composite for Enhanced Pipeline Coating
Study on the Dense-Packing Effect and Properties of Multi-Component Cementitious Material
Machinability of Short Potassium Titanate Fiber Reinforced Aluminum Alloy Composites Fabricated by Squeeze Casting
Chapter 2. Chemical Materials and Technologies
The Effect of Silver and Silver-Platinum Doped Into 5A Zeolite on the Degradation of Naptalam
Preparation and Characterization of Au/Al2O3 and Au-Fe/Al2O3 Materials, Active and Selective Catalysts in Oxidation of Cyclohexene
In Situ Growth of Zinc Oxide Nanoparticles on Cotton Fabric Using Sonochemical Method
Effect of Cold Rolling on Sensitization of 304 Stainless Steel Weldments
Synthesis, Characterization and Evaluation of Property Profile of Hybrid Ion- Exchanger
Preparation and Characterization of Activated Carbons Based on Lignocellulosic Residues
Experimental and Numerical Study of Plain-Woven Aramid Fabric
Preparation of Three Dimensional Products Using Flow Deformability of Wood Treated by Small Molecular Resins
Epoxidized Vegetable Oil as a Sustainable Ingredient in Welding Electrode Coatings
Contact Width Analysis of Corrugated Metal Gasket Based on Surface Roughness
Experimental Investigation on Nanofluids Effectiveness on Heat Transfer in Oscillating Heat Pipe
Deposition and Characterization of Electroless Ni-P/Ni-W-P Duplex Coating Using Electrochemical Impedance Spectroscopy
Experimental Study of Surface Roughness of Wood Plastic Composites after Turning
Utilization of Sulfur Waste from Petroleum Refinery for Sulfur Concrete
Conductivity and Transport Properties Study of Plasticized Carboxymethyl Cellulose (CMC) Based Solid Biopolymer Electrolytes (SBE)
Biosurfactant Producing Bacteria with Tensoactive and Emulsifying Properties Isolated from Palm Oil Mill Effluent
Enhanced Adsorption of Pb(II) on Chemically Treated Neem (Azadirachta indica) Leaf Powder
Chapter 3: Modelling and Analysis of Materials Properties and Technologies
Numerical Analysis of Nanoscale Junctionless MOSFET Including Effects of Hot-Carrier Induced Interface Charges
Cutting Simulations and Experiments of Milled SiC Particle-Reinforced Aluminum Matrix Composites
Validation of Nitinol SMA Characteristics Using Finite Element Analysis and Closed Form Solutions
Optimization of Process Parameters of Diffusing Bonding of Titanium with Titanium and Titanium with Copper
Multi Regression Analysis of Flow Curve Obtained by Torsion Test
Researches Concerning the Phenomena at the Interface for the Sintered Compacts of Titan-Hydroxyapatite
A Comparison among Polynomial Model, Reduced Polynomial Model and Ogden Model for Polyurethane Foam
Modeling and Simulation of Microwave Circuits
Numerical Simulation of Polyurethane Foaming Process Using Finite Point Method
Enhanced Efficiency of Au-Deposited BiFeO3 Nanoparticles Based Dye-Sensitized Solar Cells
Numerical Investigation of the SiGe/Si Heterostructure Including Interfacial Defects for Photovoltaic Applications
Thickness Dependence of Structural and Optical Properties of Al/ZnO Films Prepared by DC Magnetron Sputtering
Investigation on the Structural Properties of a New Prepared 0.2PZS-0.8PLZT Ceramics
Residual Stress and Microstructures Characterization in Welded Al-Si-12Cu Alloy
Hydroxyapatite Deposition onto Ti-6Al-4V Surface in Powder Mixed Electrical Discharge Machining
Steady State Conduction Behaviour of Liquid Crystalline Polyurethane
Effect of Gate Dielectrics on the Performance of P-Type Cu2O TFTs Processed at Room Temperature
CFD Study on the Role of Gas Friction on the Molten Layer Shape and Melt Removal Mechanism in Laser Cutting Process of Steel
Ti-6Al-4V Surfaces in SiC Powder Mixed Electrical Discharge Machining
Analysis of Strain Hardening Behaviour of Cast Aluminium Alloy 354 Subjected to Artificial Ageing at Various Temperatures
Effect of Melt Cooling Rate on Microstructure of Sn - Bi and Sn - Pb Eutectic Alloys
Analysis and Quantification of Grain Size of Various DHP Copper Tubes Manufacturing Processes
Evaluation of Mechanical Behaviour of Bone Cements by Using Acoustic Emission Technique
The Effect of Intercritical Deformation on Microstructure Development in Thermomechanically-Processed Low-Silicon TRIP-Assisted Steels
Evaluation of the Physical and Mechanical Properties of Ceramic Tiles Processed Using Steel Slag
Significant Atomic Displacement at Isostructural Transition in Li0.99Cu0.01CrO2 and its Effects
Modification of some Optical and Mechanical Properties of Amorphous As-S-Se Thin Films by Copper Introduction
Chapter 4: Nanomaterials and Nanotechnologies
AFM Studies of Thin Films as Nanobiosensor for Early Detection of Prostate Cancer
Strength and Microstructural Performance of Nano-SiO2 Gel (NSG) Infused Alkaline Activated Ground Blast Furnace Slag-Ultrafine Palm Oil Fuel Ash (AAGU) Based Mortar
Sol Gel Characterization of Nano Kaolin
Ultrafine Solid State Polymerized PA66 Nanofibers Fabrication via Air-Sealed Centrifuge Electrospinning (ASCES)
Structure and Magnetism of Fe/Al Nanostructures Grown by Ion-Beam Sputtering
Low Band Gap Co80Ni20@RGO Nanocomposite
Effect of Capping Agent on Physicochemical Properties of Zinc Substituted Nanoscale Hydroxyapatite
Castor Oil Based Polyurethane Nanocomposites with Cellulose Nanocrystallites Fillers
Enhancement in Thermal Property of Phase Change Microcapsule with Modified Carbon Nanotube
Chapter 5: Advances in Energy Technology
Enhancing Biogas Production from Sugarcane Bagasse Using Steam Explosion in According With Acetic Acid Pretreatment
Biogas Production from Napier Grass (Pak Chong 1) (Pennisetum purpureum x Pennisetum americanum)
Effect of Building Management System on Energy Saving
The Effect of Mixing Coal with Biomass in Solid Fuel Briquettes
Prediction of the Remaining Service Life of Superheater and Reheater Tubes in Coal-Biomass Fired Power Plants
Study on the Performance of the Organic Rankine Cycle System with Internal Heat Exchanger under Vehicle Engine Various Operating Conditions
Chapter 6: Applied Mechanics and Mechanical Engineering
Current Mode Filters Using Current Feedback Amplifiers with Negative Impedance (Resistance)
VPP Processed Variable Phase Controller for Array Antenna Scanning
Numerical Simulation of the Mechanical Structure of a Helmet Motorcyclist
The Stress Field in a Flexed Beam with an Elastoviscoplastic Behavior
The Chip in the Up and Down Milling Process
Creep Behavior of Catheter Reinforced with Braids: Analytical Simulation of Uniaxial Tension under Two-Stage Step Stress
