Material and Manufacturing Technology VII

<ul><li>Preface, Conference Committee</li><li>Chapter 1: Alloys and Alloys Processing Technology</li><li>Welding Repair of Aluminium Alloy 6082 T6 by TIG Welding Process</li><li>Improvement of Welding Repair Aluminium Alloy 6082T6 by MIG Welding Process</li><li>Effect of Alloying Elements on the Hardness Property of 90% Copper-10% Nickel Alloy</li><li>Effect of Water Flow Direction on Cut Features in the Laser Milling of Titanium Alloy under a Water Layer</li><li>Characteristics of Machining Parameters on WEDM Titanium Alloy</li><li>Effect of Porosity on Residual Stress of 2024-Aluminum GTAW Specimen</li><li>Effect of Precipitate on Microstructure Evolution and Hardness of Al-Cu Alloy during Torsion Deformation</li><li>Direct Measurements of Magnetocaloric Effect in a Single Crystalline Ni_2.13Mn_0.81Ga_1.06 Heusler Alloy</li><li>Chapter 2: Steel and Technologies of Metals Processing</li><li>Influence of Steel Strip-Feeding Process on Density and Segregation of Casting Ingot</li><li>Microstructure Change in ASSAB 760 Steel during Cementation and Quenching Process</li><li>Microstructure and Wear Resistance of Hard-Facing Weld Metal on JIS-S50C Carbon Steel in Agricultural Machine Parts</li><li>Life Extension of Propeller Shafts by Hardfacing Welding</li><li>Fine Blanking Technology Optimization of Front End Cover of Timing System for Compressed</li><li>An Effect of Friction Bonding Parameters to Delamination Defect</li><li>Chapter 3: Ceramics and Glass</li><li>Structural Characterization of a Glass Ceramic Developed from TiO₂ and a Novel Material-Silica Xerogel Converted from Sago Waste Ash</li><li>Electrical Properties of Modified BNT Based Lead-Free Ceramics</li><li>Fabrication and Properties of Mullite Ceramics from Ranong Kaolin</li><li>Influence of Sintering Temperature on Electrical Properties of Modified-PZT Piezoelectric Ceramics</li><li>Electrical Properties of BNKTZ Ceramics as a Function of Calcination Temperature</li><li>Effect of Electrode on Electrical and Ferroelectric Behavior of Modified BNT Lead-Free Ceramics</li><li>Effect of High-Frequency Microwaves on the Microhardness of Alumina Ceramic</li><li>Thermal and Physical Properties of White-Opaque Sanitary Glazes Using Lampang Pottery Stone as Raw Materials</li><li>X-Ray Diffraction Characteristics of Kovar Alloy and Al₂O₃ Ceramics</li><li>The Study of Physical and Optical Properties of Barium Borophosphate Glasses</li><li>Defect Reduction in the CO₂ Laser Cutting of Glassware Rim</li><li>Total and Partial Photon Interactions of BaSO₄-Na₂O-B₂O₃-SiO₂</li><li>Chapter 4: Preparation and Properties of Thin Films</li><li>Effect of Anodizing Voltage on Anodic Titanium Dioxide (ATO) Growth Based on an Ethylene Glycol Solution Containing NH₄F</li><li>Nanoporous Anodic Aluminum Oxide (AAO) Thin Film Fabrication with Low-Grade Aluminium</li><li>Preparation and Characterization of Bionanocomposite Films Made from Carrageenan, Beeswax and ZnO Nanoparticles</li><li>Physico-Mechanical Properties of Starch-Based Nanocomposite Film Incorporated with Hydrothermally Synthesized Zinc Oxide Nanoparticles</li><li>An Effect of Process Parameters to Anodic Thickness in Hard Anodizing Process</li><li>Chapter 5: Materials and Technologies in Chemical Engineering</li><li>Adsorption of Direct Red 80 Dye from Solution by Sugarcane Bagasse and Modified Sugarcane Bagasse as Adsorbents</li><li>Synthesis of Carbon-Supported Metal Catalysts by HTC and Electroplating Processes from Cattail Flower</li><li>Production of ?-Valerolactone from Methyl Levulinate via Catalytic Transfer Hydrogenation on Nickel-Copper Oxide Catalyst</li><li>TiO₂ Powder Synthesized via the Solvothermal Method and Enhanced Photocatalytic Degradation of Methomyl</li><li>Effects of ZnO Addition on Fe₂O₃/Al₂O₃ Oxygen Carriers on CH₄ Reduction for Chemical Looping Combustion</li><li>Fantastic Carbon Material for Nickel/Carbon Support Catalyst Reducing via Calcination Enhanced with Hydrothermal Carbonization</li><li>Effect of Alkaline Activation on Low Grade Natural Kaolin for Synthesis of Zeolite A</li><li>Characterization of Diatomite, Leonardite and Pumice</li><li>Gas Atomizer Making to Produce Tin Powders</li><li>Chapter 6: Nanocomposite Materials and Nanotechnology</li><li>Metal Oxide Nanocomposites: Advantages and Shortcomings for Application in Conductometric Gas Sensors</li><li>Impedance Spectroscopic Inspection Toward Sensitivity Enhancement of Ag-Doped WO₃ Nanofiber-Based Carbon Monoxide Gas Sensor</li><li>The Improvement in Mechanical and Thermal Properties of Biodegradable Poly(Butylene Succinate) (PBS) Nanocomposites with Low Loadings of Graphene Oxide (XGO)</li><li>Preparation of Zeolite Nanocrystals via Hydrothermal and Solvothermal Synthesis Using of Rice Husk Ash and Metakaolin</li><li>Effects of TEOS Precursor and Reaction Time on the Synthesis of Silica Coated Single-Walled Carbon Nanotubes</li><li>Characterization of Bismuth Vanadate Nanopowder Prepared by Microwave Method</li><li>Chapter 7: Materials in Biomedical Engineering and Construction</li><li>Effects of Hydroxyapatite/Silk Fibroin/Chitosan Ratio on Physical Properties of Scaffold for Tissue Engineering Application</li><li>Comparative Studies of the Light Yield Non-Proportionality and Energy Resolution of CsI(Tl), LYSO and BGO Scintillation Crystals</li><li>Compressive Strength Development of High Strength High Volume Fly Ash Concrete by Using Local Material</li><li>Study on the Performance of Orthodontic Self-Drilling Correction Screw of Ti6Al4V and Stainless 316L</li><li>Influence on Fatigue and Biomechanics of Cone Fit of Dental Implant around the Surrounding Bone Tissue</li></ul>