Forming the Future
Proceedings of the 13th International Conference on the Technology of Plasticity
1st Edition
Published on 10. July 2021
XXXII, 3001 pages
978-3-030-75381-8 (ISBN)
Description
In this collection, scientists and engineers from across industry, academia, and government present their latest improvements and innovations in all aspects of metal forming science and technology, with the intent of facilitating linkages and collaborations among these groups. Chapters cover the breadth of metal forming topics, from fundamental science to industrial application.
More details
Series
Language
English
Place of publication
Cham
Switzerland
Publishing group
Springer International Publishing
Product notice
Reflowable
Illustrations
XXXII, 3001 p. 2121 illus., 1601 illus. in color.
File size
132,48 MB
ISBN-13
978-3-030-75381-8 (9783030753818)
DOI
10.1007/978-3-030-75381-8
Schweitzer Classification
Other editions
Additional editions
Glenn Daehn | Jian Cao | Brad Kinsey
Forming the Future
Proceedings of the 13th International Conference on the Technology of Plasticity
Book
07/2021
Springer
€641.99
Shipment within 7-9 days
Persons
Glenn Daehn, The Ohio State University, USA; Jian Cao, Northwestern University, USA; Brad Kinsey, University of New Hampshire, USA; Erman Tekkaya, Technical University of Dortmund, Germany; Anupam Vivek, The Ohio State University, USA; and Yoshinori Yoshida, Gifu University, Japan.
Content
- Intro
- Preface
- Contents
- Part I Honorary Symposium: Taylan Altan
- 1 Self-optimized, Intelligent Open-Loop-Controlled Steel Strip Straightening Machine for Advanced Formability
- 2 A Vision of Numerically Controlled, Autonomous Manufacturing and Metal Forming
- 3 Investigation of Effects of Part Features in Single Point Incremental Forming of Narrow Channels
- 4 Enhancing Tool Life by Manipulating the Die Elastic Strain Field During Extrusion
- Part II Honorary Symposium: Niels Bay
- 5 Oscillation-Free Determination of Material Properties at High Strain Rate
- 6 Tribological Conditions in Hot Bending of 22MnB5 Tubes
- 7 In Search of the Perfect Sheet Metal Forming Tribometer
- 8 A Contact and Friction Model for Forming of Galvanized Steel Sheet Based on Fractal Theory
- 9 On the Characterization of Fracture Loci in Thin-Walled Tube Forming
- 10 Deformation Mechanisms in Tool-Workpiece Asperity Contact in Metal Forming
- 11 Welding of Aluminium in Chip Extrusion
- Part III Honorary Symposium: Xue Yu Ruan
- 12 Bulk Microforming from Sheet Metal-A Promising Approach for the Mass Production of Cold-Formed Metallic Micro Parts
- 13 Machine Learning (ML)-Based Prediction and Compensation of Springback for Tube Bending
- 14 Ductile Fracture Prediction of Hot-Stamped Boron Steel 22MnB5 with Modified Mohr-Coulomb and Hosford-Coulomb Models
- 15 Understanding the Microscale Plastic Behavior and Deformation Mechanism of Magnesium Alloy via Ex Situ Experiments and Full-Field Crystal Plasticity Modeling
- Part IV Honorary Symposium: Yasuhisa Tozawa
- 16 A Plasticity Framework for Forming Applications
- 17 Hole Expansion Simulation of Steel Sheet Considering Differential Hardening
- 18 Surface Quality of Extruded Sidewall in Cold Backward Cup Extrusion with Low-Frequency Torsional Oscillation
- 19 Anisotropic Ductile Fracture Estimation of Diagonal Cracks in Flange-Shaped Parts
- 20 Prediction of Microstructure Behavior During Large-Scale Hot Forging of Ni-Based Superalloy
- Part V Honorary Symposium: Rob Wagoner
- 21 Simulated Microstructure Effects on Macroscopic Mechanical Properties Based on Multiscale Crystal Plasticity
- 22 Experimental Study on Texture Evolution of Mg-Y Magnesium Alloy in Extrusion
- 23 Advancing the Accuracy of Computational Models for Double-Sided Incremental Forming
- 24 Nonlinearity of the Crystal Yield Function in the Rate-Independent Crystal Plasticity and Its Effect on the Evolution of Anisotropy
- 25 Experimental Study and Analysis on the Effects of Cyclic Bending on the Stress-Strain Curves of Aluminum Plate
- Part VI Honorary Symposium: Zhongren Wang
- 26 Professor Z. R. Wang's Contributions to Metal Forming Theory, Technology, and Education
- 27 Adding Value by Advancing Metal Forming Technology
- 28 A Study of the Forming Quality of Magnesium Alloy Cylindrical Parts with Inner Ribs by Induction-Heating-Assisted Spinning
- 29 A Porosity Closure Model for the Integrated Casting and Forging Process of Aluminum Alloy and Its Application
- 30 Robust Hydroforming Technologies to Enhance the Formability of Sheet and Tube
- Part VII Agile Metal Forming
- 31 Recent Investigations on Incremental Sheet Forming: From Fundamentals to Industrial Application Technologies
- 32 The Effect of Ultrasonic Vibration on Material Movement in Incremental Sheet Forming
- 33 Investigation of an Integrated Process for Bending and Cross-Section Forming of Tubular Lightweight Parts Based on a Working Media Made of Materials with High Plasticity
- 34 Instability Analysis in Incremental Rotary Forming of Tube Flanges
- 35 Incremental Collar Forming Process for the Manufacturing of Branched Tubes and Pipes
- 36 Deformation Analysis in Ultrasonic-Assisted Multi-stage Incremental Sheet Forming
- 37 A New Test Method for Sheet Metal Deformation Subject to Tension Under Cyclic Bending and Compression (TCBC)
- 38 Numerical Modelling and Deformation Mechanics of the English Wheel Process
- 39 The Dieless Drawing Process for the Elongation of Ultrafine Copper and Brass Wire
- 40 Robotic Roller Forming Process and Strategies to Eliminate Geometrical Defect of Edge Waves
- 41 Numerical Modelling of the Flow Forming Process: Computation Time Optimization and Accuracy Analysis
- 42 On the Geometrical Accuracy in Incremental Sheet Forming
- 43 Tube Roll Forming Flower Design and Flexible Roll Adjustment with CAE Simulation
- 44 Open Die Forging of Copper Cone
- 45 Flexible Manufacturing of Concave-Convex Parts by Incremental Sheet Forming with Active Medium
- 46 Manufacturing of Tailored Blanks with Pre-shaped Involute Gearings by Using a Flexible Rolling Process and Its Application in a Sheet-Bulk Metal Forming Process
- 47 Roll Forming of Cup with Curved Rotary Profile
- Part VIII Big Data and Metal Forming
- 48 Investigation of Machine Learning Models for a Time Series Classification Task in Radial-Axial Ring Rolling
- 49 Toward Neural Network Models to Model Multi-phase Solids
- 50 Comparison of Linear Regression and Neural Networks as Surrogates for Sensor Modeling on a Deep Drawn Part
- 51 Development of Mechanical Cards for Finite Element Analysis of Mild Steels by Parameter Optimization
- Part IX Characterization of Plasticity and Ductile Fracture of Metals under Proportional and Non-proportional Loading
- 52 Cyclic Loading Tests Based on the In-Plane Torsion Test for Sheet Metal
- 53 Plastic and Fracture Characteristics of WE43 Mg Alloy Under Complex Stress States
- 54 Strain Hardening of AA5182-O Considering Strain Rate and Temperature Effect
- 55 New Methods for Fracture Detection of Automotive Steels
- 56 Evaluation of Isotropic and Anisotropic Constitutive Models on Plasticity Prediction of AA7075 Extruded Tube Under Tension-Tension and Tension-Compression
- 57 Estimation and Prevention of Strain Localization in Shear Tests
- 58 Experimental and Numerical Studies on Plastic Deformation and Failure Behavior of Carbon Nanotube-Reinforced Al Composite Sheet Under Uniaxial Loading Condition
- 59 Experimental Study on Uniaxial Strain Cyclic Behavior of GS-20Mn5
- Part X Constitutive Behavior
- 60 Influence of Deformation on Texture Development During Cold Drawing of Tubes
- 61 Dynamic Recrystallization Behaviors of 5083 Aluminum Alloys with Different Initial Microstructures Under Hot Compression
- 62 Application of Barlat's Yld 2000-2d Yield Criterion to Predict the Anisotropic Response of Stainless Steel
- 63 Evaluation of Press Forming Technique for Bent Automotive Body Parts Using In-Plane Shear Deformation
- 64 Simulation of Cold Forging Processes Using a Mixed Isotropic-Kinematik Hardening Model
- 65 Analysis of the Thermomechanical Flow Behavior of Carburized Sheet Metal in Hot Stamping
- 66 Effect of Short Pulsed-Current on Stress Relaxation in Uniaxial Tensile Test
- 67 Experimental Study on Mechanical Response of Q235 Steel Under Cyclic Stress Loading
- 68 The Effect of Trace Nitrogen on Microstructure and Property of Cr-Mo-V Hot-Working Die Steel
- 69 Rate-Dependent Hardening Behavior of Autobody Sheet Metals in Tension and Compression
- 70 Analysis of Creep Behavior of Magnesium Alloy Sheet (AZ31B) in Warm Forming
- 71 The Effect of Electroplasticity on the Flow Behavior of AA7075 in T6 Temper
- 72 Effect of Pulse Current on Mechanical Properties and Microstructure of Ultrahigh-Strength Steel
- 73 Experimental Study and Modelling of Stress Relaxation Ageing Behaviour and Post-form Mechanical Properties in Creep Age Forming of Al-Zn-Mg Alloy
- 74 Flow Behavior and Processing Map of a Nickel-Based Superalloy During Hot Plastic Deformation Process
- 75 Hot Deformation Behavior and Constitutive Modeling of a Novel Ni-Based Superalloy
- 76 Accurate Modelling of Flow Stress of AISI1025 at Room Temperature and Its Application to Precision Forging Simulation
- 77 Stress-Relaxation Age Forming of a Component with Complex and Large Curvatures: Simulation and Manufacturing
- 78 Toward an Efficient Industrial Implementation of W-temper Forming for 7xxx Series Al Alloys
- 79 Calibration and Validation of Stress-Strain Curve in High-Strain Region of Mild Steel Sheet
- 80 Influence of the Quenching Rate and Natural Ageing Duration on the Formability and Mechanical Properties of EN AW-7075
- 81 Constitutive Model and Plate Forging Ability of 5052 Aluminum Alloy Under Different Temperatures
- 82 Research on Rolling Process and Superplasticity for 5A90 Al-Li Alloy
- Part XI Extrusion and Drawing
- 83 Co-Extrusion of Compound-Cast AA7075/6060 Bilayer Billets at Various Temperatures
- 84 Reducing Aluminum Extrusion Transverse Weld Process Scrap
- 85 Introduction of a New Method for Continuous Aluminum Hot Extrusion
- 86 Study on Complex Extrusion of Multi Billets: Evaluation of Mechanical Properties of Butt-Joined Products and Analysis of Joining State
- 87 Effect of Expansion Ratio on Formability in Tube Drawing with Diameter Expansion
- 88 Investigation of Forward-Backward-Radial Extrusion Process of Aluminum Alloy Wheel Hub
- Part XII Forging
- 89 Galling-Free Micro-Forging of Titanium Wire with High Reduction in Thickness by ß-SiC Dies
- 90 Deformation Mechanism of the Tooth Material Filling for Precision Forging of Spur Gears
- 91 Compression of Printed CFRT Composite: Shaping Parameters and Material Health
- 92 Influences of Key Forging Parameters on Cold Orbital Forging of Thin Parts with High Circular Ribs
- 93 FE-Based Investigation on the Influence of Inhomogeneously Heated Billets on Subsequent Forging Processes
- 94 Development of Automatic Design System for Closed Die Forging Process of Disk-Shaped Products
- 95 A FE Billet Model and a Spring-Mass-Damper Model for the Simulation of Dynamic Forging Process: Application to a Screw Press
- 96 Optimization of Open-Die Forging Using Fast Models for Strain, Temperature, and Grain Size in the Context of an Assistance System
- 97 General Step Reduction and Enlargement Method for Knowledge-Based Process Planning of Totally Non-axisymmetric Forged Products with Blanking and Punching
- 98 Investigation of Failure Mechanisms of Cemented Carbide Fine Blanking Punches by Means of Process Forces and Acoustic Emission
- 99 Microstructural Evolution of Ti-55511 Titanium Alloy During Quasi-Beta Forging
- Part XIII High Speed and Impulse Forming
- 100 High-Speed Material Characterization Using an Instrumented Forging Hammer
- 101 Advancements in the Simulation of Magnetic Pulse Forming Processes with FORGE®
- 102 The High-Speed Deformation Behavior of High-Strength Lightweight Al-Li Alloy Sheets
- 103 The Effects of the High-Velocity Shearing Speed on the Sheared Edge Quality and Edge Cracking
- 104 Local Microscopic and Integral Macroscopic Analysis of Magnetic Pulse Welds and Deformations for Dissimilar Metal Joints
- 105 Computational Modeling of Magnetic Pulse Dissimilar Alloys Welding: Aluminum Alloy 6082-T6 and HC420LA Steel
- 106 Influence of Ultrasonic Assistance on the Forming Limits of Steel
- 107 Design and Fabrication of a High-Performance Magnetic Actuator for Magnetic Pulse Welding of Metal Tubes with Large Diameters
- 108 Deformation Behavior in Magnetic Pressure Parallel Seam Welding
- 109 Shaping of Sharp-Edged Design Elements by Electromagnetic Forming
- 110 Augmentation of Plasma-Based Impulse Generation with Rapid Chemical Reactions
- 111 Recent Developments of Vaporizing Foil Actuator Technique for Manufacturing Applications
- 112 Grain Size Effect on Formability in Electromagnetically Assisted Micro-Bulging of Pure Titanium Sheet
- 113 Mathematical Model and Quantitative Analysis of Residual Stress Hole During Laser Shock Peening
- Part XIV Joining by Forming and Deformation
- 114 Simulation and Experimental Analysis of Electromagnetic Pulse Spot Welding of Sheet Metal with a Field Shaper
- 115 Mechanical Properties of Aluminium/Stainless Steel Bimetal Composite Fabricated by Extrusion Process
- 116 From Bridge to Bumper: Utilization of Pre-stressing During Manufacturing of Hybrid Sheet Metal Structures
- 117 Computer-Aided Modeling of the Hot Forming Staking Process Based on Experimental Data
- 118 Fatigue Characteristics and Failure Mechanism of Self-piercing Riveted Joints of DP590 and AA6061 Plates
- 119 Fretting Damage and Fatigue Property Analysis of Self-piercing Riveted Joints of AA5052 Aluminium Alloy
- 120 Elastoplastic Finite-Element Analysis of Multi-Body Processes for Joining Mechanical Parts
- 121 A New Non-destructive Testing Method Applied to Clinching
- 122 Investigation on the Strain Induced Oxide Layer Fracture and Bonding During Cold Rolling of Aluminum Alloys
- 123 Ultrasonic Forming-Alternative to Orbital Riveting for Small Bimetallic Components
- 124 Self-Piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening
- 125 Numerical and Experimental Investigations on Riveting Assembly Processing Parameters of Hub Bearing Unit
- Part XV Lubrication and Surface Effects
- 126 Evaluation of Lubricant Performance for Thick Sheet Ironing Process by Ball Ironing Test
- 127 Development of Oil-Type Lubricants for Cold Forging Using Phase Transition Behavior Under High-Pressure Conditions
- 128 Analysis of Work Hardening and Tribological Changes After a Gap Controlled Drawbead Passage
- 129 Investigations on Dynamic Characteristics of a Mechanical Press Considering Both Translational Clearance Joint and Lubrication Effect
- Part XVI Microstructure and Damage Development and Characterization
- 130 Temperature-Dependent Fracture Loci of AZ31 Magnesium Alloy Sheets
- 131 Influence of Specimen Preparation Methods on the Mechanical Properties and Superplastic Behavior of AA5083 Sheets
- 132 Application of the Nondestructive Evaluation (NDE) Method to Evaluate the Sheared Edge Quality and Edge Cracking
- 133 An Extended Ductile Fracture Prediction Model Considering Hydrostatic Stress and Maximum Shear Stress
- 134 Full-Field Strain Measurement in Multi-stage Shear Cutting: High-Speed Camera Setup and Variational Motion Estimation
- 135 A Novel Continuum Damage Constitutive Model for Predicting the Formability of AA7075 Alloy at Elevated Temperatures
- 136 The Influence of Temperature and Strain Rate on the Superplastic Deformation Behavior and Microstructure Evolution of TNW700 Alloy
- 137 Finite Element Simulation of Edge Fracture by Mapping the Shear-Induced Ductile Damage into Hole-Expansion Simulation
- 138 Relaxation Characteristics of Creasing Process of Scored Paperboard for Liquid Container
- 139 Hot Cutting of Press-Hardened Parts in Different Heat Treatment Regimes
- 140 High-temperature Properties of Hot-Work Tool Steel (AISI H13) Deposited via Direct Energy Deposition
- 141 The Study of Energy Absorption of Dual-Material Tailored Plane Strain Sheet
- 142 Cyclic Hardening/Softening of a TRIP Duplex Stainless Steel
- 143 The Local Strain Evolution for Structured Sheet Metals During Uniaxial Deformation
- Part XVII Microstructure Development by Forming
- 144 Development and Implementation of Static Recrystallization Model of 6XXX Aluminum Alloy Using Industrial Experiments
- 145 The Effect of T8 Heat Treatment on Wear Behaviour and Microstructure of 6063 Aluminium Alloy Deformed by Cryo and RT ECAP
- 146 Metal Foils for Bipolar Plates-Correlation of Initial Grain Size and Forming Behavior of 316L
- 147 Study of the Influence of the Mixed-Grain Structure on the Microscopic Deformation Behavior of 316LN Steel
- 148 Dependence of Mesoscale Structure of Drawn High-Carbon Steel Wire on Wire Diameter
- 149 Thermomechanical Analysis and Experimental Validation of ECAP for Aluminum Sheet Metal
- 150 Transformation of aß During Hot Deformation in the Two-Phase Region of Ti-6Al-2Zr-1Mo-1V Alloy
- 151 Formability Improvements of AA5754-H32 at Room Temperature via Continuous Bending Under Tension (CBT) and Pre-forming Heat Treatment
- 152 Microstructure Evolution During Isothermal Forging of 7A85 Aluminum Aviation Component
- 153 The Deformation and Microstructure Analysis of Medium Carbon Steel During Die Forging Process and the Effect of Microalloying Elements
- 154 Effect of Ferrite Rolling Temperature on the Microstructure and Properties of an Ultra-Low Carbon Steel Produced by CSP Process
- 155 The Effect of Temperature on the Strain-Induced Austenite to Martensite Transformation in SS 316L During Uniaxial Tension
- 156 Energy-Dependent Surface Integrity of Stainless Steel AISI 304 After Robot-Based Machine Hammer Peening
- 157 Non-isothermal Modeling of Static Recrystallization in Hydroformed Steel Tube Using a Coupled Cellular Automata and Finite Element Model
- 158 Fast Development of New Alloys for Metal Forming Using Additive Manufacturing
- 159 Effects of Residual Strain on Grain Growth of Extruded Aluminum Micro-channel Tubes During Heat Treatment
- 160 Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-Forming
- 161 Constitutive Modeling and Processing Map of Ti-5Al-5Mo-5V-3Cr-1Zr Alloy During Hot Deformation
- Part XVIII Mini-Symposia Characterization of Plasticity and Ductile Fracture of Metals under Proportional and Non-proportional Loading
- 162 Establishment of Sheet Plastic Wrinkling Instability WLD and Study on Strain Distribution Characteristics in Instability Region
- 163 Plasticity and Fracture Characterization of Advanced High-Strength Steel: Experiments and Modeling
- 164 Design of a New Cruciform-Like Specimen for Combined Tension and Shear of Metal Sheets
- 165 A Study of Anisotropic Yield Function Based on J² and J³ Invariants
- 166 Experimental Implementation of SS 316L Cruciform Testing to Achieve Various Deformation Paths
- 167 An Application of Homogeneous Anisotropic Hardening Model to the Prestrained Hole-Expansion Experiment
- 168 Work Hardening and Fracture Strain Evaluation of Hardened SKD11 Steel Using Shear Punching Test
- 169 Deformation of Metals Under Complex Loading
- Part XIX Novel Processes
- 170 Numerical Simulation of Tube Bending Supported by Hydraulic Pressure for Manufacturing Butt-Welding Fittings
- 171 Fluidity of Wood Composite Combined with Natural Binder on Injection Molding
- 172 Accurate Mapping of Thermal Camera Measurements on Planar Deformations
- 173 Effect of Bending Intensity on Straightness in Spinner Straightener
- 174 Using Local Heat Treatment for Producing Uniform Profile Hollow Components by Radial Rotation Profile-Forming
- 175 Analysis of Tube Spinning
- 176 Transcription of Mirror-Finished Surface onto A5083 Aluminum Alloy Plate by Friction Stir Forming
- 177 Combined Computed Tomography and Numerical Modeling for the Analysis of Bending of Additively Manufactured Cellular Sheets
- 178 Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming
- 179 Influence of Axial Feed Rate on Shape and Thickness Changes During Multi-Pass Tube Spinning: Experiments and Modelling
- 180 A Brief Review on Theoretical Aspects of Bar Straightening with Recent Developments in Its Modelling, Simulation, Control System, and Stabilization
- 181 Development of Anti-Loosening Bolts Based on Innovative Double Thread Mechanism
- 182 Study on Precision Forging Methods of Difficult-to-Knockout Components with Non-parallel Internal Grooves
- 183 Incremental Grooving of Thin-Walled Tubes Filled with Discrete Media
- 184 Vacuum Hot-Roll Bonding of Titanium and Carbon Steel Using Pure Iron Interlayer
- 185 Investigation on the Whole Forming Process of Super-Large Flat Ring
- 186 Development of a New Printing Method Using Soft Material Tools
- 187 Plasticity Improvement of CNTs/Mg Nanocomposite Materials Processed by Combining Friction Stir Processing and Ultrasonic-Assisted Extrusion
- Part XX Residual Stresses in Metal Forming
- 188 Complementary Methods for Assessment of Residual Stress Fields Induced by Rotary Swaging of Steel Bars
- 189 Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis-A New Temperature Compensation Method
- 190 Formation of Residual Stresses in Austenitic Stainless Steels by Infeed and Recess Rotary Swaging
- 191 Influence of Material Delivery Condition on Residual Stresses and Part Properties During Forward Rod Extrusion
- 192 Experimental and Numerical Investigations on the Development and Stability of Residual Stresses Arising from Hot Forming Processes
- 193 Analysis of Cylindrically and Spherically Embossed Flux Barriers in Non-oriented Electrical Steel
- 194 Analysis of Influencing Factors on the Achievability of Bistable Fully Closed Shells by Semi-Analytical Modeling
- 195 Influence of Shear Cutting Process Parameters on the Residual Stress State and the Fatigue Strength of Gears
- 196 Residual Stresses in Hot Bulk Formed Parts-A Phenomenological Approach for the Austenite-to-Martensite Phase Transformation
- 197 Local Creation of Uniform Residual Stresses Into Sheet Metal Components by Means of Multiple One-Side Embossing
- Part XXI Rolling
- 198 Hot Ring Rolling and Cold Expanding Strengthening of Mn18Cr18N Thick-Wall Hollow Ingots
- 199 Achieving an Interference Fit Between Two Rings During Composite Ring Rolling
- 200 Advanced Design of Work Roll Contours for Different Roll Mill Types
- 201 Study on the Transferability of Rolling with Ordered Texturing Roll
- 202 Fundamentals of Continuous Helicoid Auger Flighting Rolling-Deformation Mechanics, Kinematics, and Applications
- 203 Evaluating an Automated Avoidance of Ring Climbing in Radial-Axial Ring Rolling
- 204 Effect of Delivery Angle on Longitudinal Buckling in Temper Rolling of Thin Steel Strips
- 205 A Fast Computational Model for the Local Stress Distribution and Mechanical and Thermal Work Roll Deformations with Effects on Strip Profile and Flatness During Hot Rolling of Strip in Four-High Mills
- 206 Investigation of a Novel Constructive Hot Ring Rolling Process for Double Metal Composite Ring
- 207 Effect of Feed Rate on Texture Evolution of 42CrMo Casting Blank During Hot Ring Rolling
- 208 A Novel Flexible Skew Rolling Process for Step Shafts: Feasibility Study
- 209 A Computational Study on the Producible Rolling Thickness in Ultra-Thin Strip Rolling
- 210 Forming Surface Texture on Copper Sheets by Electrically Assisted Micro-Rolling
- 211 Decoupling of Adverse Effect of Inter-Roll Thrust Force on Steering Control During Strip Rolling
- Part XXII Sheet Forming
- 212 Evaluating the Reliability of a Nondestructive Evaluation (NDE) Tool to Measure the Incoming Sheet Mechanical Properties
- 213 Study on the Effect of Embossing on the Bending Properties of High-Strength Sheet Metals
- 214 On the Determination of the Forming Limits by Necking and Fracture of Polycarbonate Sheet
- 215 The Effects of Press Ram Vibrations on the Production Quality
- 216 Localized Contact Pressure of Blankholder for Stamping Irregular Sheet Parts by Configuring the Height of the Supporting Elements
- 217 Evaluating 980GEN-3 Steel with Tested and Numerical Forming Limit Curves
- 218 Formability of Functional Corrugated Cup
- 219 Experimental and Numerical Investigations into the Influence of the Process Parameters During the Deep Drawing of Fiber Metal Laminates
- 220 Experimental Analysis on Granular Media-Based Tube Forming with Active Axial Feed
- 221 Finite Element Simulation and Punch Design for Tube Hydro-Piercing
- 222 Novel Roll-Bonded Stainless Steel/Boron-Steel Multilayer Under Hot Stamping Conditions
- 223 Effect of Machining Induced Microstructure Changes on the Edge Formability of Titanium Alloys at Room Temperature
- 224 Investigation on Springback Behavior of Multi-intersecting High Stiffened Structure in Die Forming
- 225 Size Effect on Cyclic Deformation Behavior and Springback Prediction of Ultrathin Superalloy Sheet
- 226 Hydro-Mechanical Deep Drawing of Locally Solution-Treated Aluminum Alloy Sheets
- 227 Development of Adhesion Preventing Method During Deep Drawing of Titanium Alloy Sheets
- 228 Development of Warm Press Forming Process Method of Ti-6Al-4 V Alloy Sheet
- 229 Research on New Hot Stamping Tool with Low-Cost and High-Efficiency Cooling
- 230 Formability Analysis of a Local Heat-Treated Aluminium Alloy Thin-Walled Tube
- 231 Analysis of Material Work Hardening and Fracture Strains for Sheet Metal Stamping Processes
- 232 A New Approach for the Production of Burr-Free Sheet Metal Components Having Significantly Increased Residual Formability
- 233 Fine-Piercing of Electrical Steel Sheets by Edge-Sharpened Diamond Punch
- 234 An Investigation on Formability of Ti6Al4V Alloy in the Three-Layer Sheet Hot Stamping Process
- 235 The Effects of Servo Press Forming on Various Strain Path Failures
- Part XXIII Technologies to Speed Innovation
- 236 Recent Advances on Modeling Plastic Deformation of Textured Metals with Applications to Metal Forming
- 237 Experimental Investigation of Different WAAM (Wire-Arc Additive Manufacturing) Processes and Their Influence on the Component Properties and Formability
- 238 Validation of Automatically Generated Forging Sequences by Using FE Simulations
- 239 Tube Forming and Fabricating Technologies for Contributing Society by Tackling Problems of Environment and Aging Population
- 240 Multi-objective Sizing Optimization of Elbow-Bar Driving Mechanism of Cold Forging Press
- 241 Pre-forging Shape Design Using Conformal Mapping Method
- Part XXIV Value of, and Limits to, Simulation
- 242 Constitutive Law Parameter Identification for Hot Forging Using Compression Experiments on Forging Presses
- 243 FE Simulations of Piercing and Trimming of AL and AHSS Alloys
- 244 Finite Element Method Based on Space Mesh
- 245 Comparison on the Processing of Height Deviations of Disks from FEM and Real Rollings in Radial-Axial Ring Rolling
- 246 PID Controller Integrated with FEM Model to Generate Boundary Conditions for Free Tube Bulging for Tubular Material Characterization
- 247 Correction to: In Search of the Perfect Sheet Metal Forming Tribometer
- Author Index
- Subject Index
