Engineering Drawing from the Beginning
The Commonwealth and International Library: Mechanical Engineering Division
Published on 15. May 2014
192 pages
978-1-4831-8427-2 (ISBN)
Description
Engineering Drawing from the Beginning, Volume 2 discusses the methods for communicating technical engineering concepts through illustrations and drawings. This volume covers the more advance techniques in engineering drawing. The coverage of the text includes the helix, which is the path traced by a point moving uniformly around the surface of a right cylinder that is moving axially. The book also covers drawings of solid objects such as prisms, pyramids, and cones, along with hollow objects made from sheet material. In Chapter 5, the text presents the conventional representations of common features. The sixth chapter deals with all forms of fastenings, while the seventh chapter talks about metrication in the drawing office. The last chapter details the working drawings of assemblies and parts taken from those assemblies. The text will be most useful to students and professional engineers, as both learning material and reference source.
More details
Other editions
Additional editions
M.F. Cousins
Engineering Drawing from the Beginning: v. 2
Book
05/1970
Pergamon
€12.38
Article exhausted; check different version
Content
List of IllustrationsEditor's PrefaceAuthor's Acknowledgments1 Revision and Introduction 1.1 Revision of Previous Work from Volume 1 1.2 Types of Projection 1.3 Dimensioning 1.4 Sectional Views 1.5 Part or Detail Drawing 1.6 Assembly Drawing 1.7 Sub-assemblies 1.8 Division of a Line into Equal Parts 1.9 Joining of Straight Lines to Curves 1.10 Pencil Point 1.11 Division of Circumference of a Circle 1.12 Radius Corners2 The Helix 2.1 Definition of the Helix 2.2 The Construction of a Helix 2.3 The Construction of a Double Helix 2.4 The Construction of a Helical Groove in a Cylinder 2.5 A Helical Spring (Round Wire) 2.6 A Square Thread 2.7 A Helical Spring (Square Wire) 2.8 The Ellipse3 Interpenetration of Solids 3.1 Simple Rectangular Objects 3.2 Hexagonal Prisms 3.3 Square Pyramids 3.4 Auxiliary Views and True Shapes 3.5 Hexagonal Prisms 3.6 Hexagonal Pyramids 3.7 Cylinders 3.8 Cones4 Development 4.1 Cylinder 4.2 Cube 4.3 Rectangular Object 4.4 Hexagonal Object 4.5 Cube (Cut) 4.6 Square Pyramid 4.7 Square Pyramid (Cut) 4.8 Square Pyramid (Double Cut) 4.9 Cylinder (Cut) 4.10 Cylinder (Cut) 4.11 Elbow, 90° 4.12 T with Equal Diameter Pipes 4.13 T with Unequal Diameter Pipes 4.14 45° Angle 1 4.15 Branch T. Development of Pipes of Unequal Diameters 4.16 Branch T. Development of Pipes of Unequal Diameters 4.17 Offset T. Complete Development 4.18 Cone Development 4.19 Cone Cut Development 4.20 Cone (Double Cut). Complete Development 4.21 Cone? (Cut). Development of Curved Surface Only5 Conventional Representations of Common Features 5.1 Screw Threads 5.2 Springs, Compression 5.3 Springs, Tension 5.4 Knurling 5.5 Hexagon Nut 5.6 Hexagon Bolt 5.7 Square End on Shaft 5.8 Holes of Circular Pitch 5.9 Holes on a Linear Pitch 5.10 Bearings 5.11 Round Rod 5.12 Round Tube 5.13 Rectangular Bar (Metal) 5.14 Rectangular Bar (Wood)6 Fastenings 6.1 Riveting 6.2 Lap Joints 6.3 Butt Joint. Single Cover Plate 6.4 Butt Joint. Double Cover Plate 6.5 Angle-riveted Joint 6.6 Angle-riveted Joint 6.7 Built-up Girder 6.8 Built-up Box Girder 6.9 Taper Keys 6.10 Parallel Keys 6.11 Leather Key 6.12 Woodruff Key 6.13 Gib Head 6.14 Cotter 6.15 Butt Weld 6.16 Lap Weld 6.17 Fillet Weld 6.18 Seam Weld 6.19 Drawing Welded Joints 6.20 Lock Nut 6.21 Nuts Pinned 6.22 Sawn Nut 6.23 Spring Washers 6.24 Two Plates Clamped 6.25 Cable Clamp 6.26 Mounted Plates 6.27 Clamped Plates 6.28 Multiple Plates 6.29 Multiple Plates with Spacers 6.30 Shaft Location 6.31 Gear Reduction Unit Assembly 6.32 Screwed fitting Metal Lamp Holder 6.33 Simple Sliding Platform 6.34 Captive Screw 6.35 Packing Gland7 Metrication in the Drawing Office. Limits, Fits, and Tolerances 7.1 Metrication 7.2 Machined Surfaces 7.3 Definition of Terms 7.4 Types of Fits 7.5 Crank Shaft Assembly 7.6 Crank Shaft Part No.1 7.7 Connecting Rod. Part No. 2 7.8 Bearing Bracket. Part No. 3 7.9 Bearing Cap. Part No. 48 Working Drawings 8.1 Gear Casing 8.2 Assignment A. Gear Casing 8.3 Assignment B. Gear Casing 8.4 Sole Plate 8.5 Assignment A. Sole Plate 8.6 Wall Bracket 8.7 Assignment B. Wall Bracket 8.8 Drillhead Bracket 8.9 Assignment A. Drillhead Bracket 8.10 Value Case 8.11 Assignment. Valve Case 8.12 Stuffing Box Assembly 8.13 Assignment. Stuffing Box 8.14 Assignment. Screwed Flange 8.15 Assignment. Stop-valve Body 8.16 Angle Cross-Pipe Joint 8.17 Assignment. Pipe Joint 8.18 Tilting Platform 8.19 Assignment A. Tilting Platform 8.20 Assignment B. Tilting Platform 8.21 Tilting Platform. Part Drawings 8.
