Characterization of Solid Materials and Heterogeneous Catalysts
From Structure to Surface Reactivity
1st Edition
Published on 16. April 2012
CII, 1182 pages
978-3-527-64533-6 (ISBN)
Description
This two-volume book provides an overview of physical techniques used to characterize the structure of solid materials, on the one hand,
and to investigate the reactivity of their surface, on the other. Therefore this book is a must-have for anyone working in fields related to surface
reactivity. Among the latter, and because of its most important industrial impact, catalysis has been used as the directing thread of the book.
After the preface and a general introduction to physical techniques by M. Che and J.C. Védrine, two overviews on physical techniques are
presented by G. Ertl and Sir J.M. Thomas for investigating model catalysts and porous catalysts, respectively.
The book is organized into four parts: Molecular/Local Spectroscopies, Macroscopic Techniques, Characterization of the Fluid Phase (Gas and/
or Liquid), and Advanced Characterization. Each chapter focuses upon the following important themes: overview of the technique, most important parameters to interpret the experimental data, practical details, applications of the technique, particularly during chemical processes,
with its advantages and disadvantages, conclusions.
and to investigate the reactivity of their surface, on the other. Therefore this book is a must-have for anyone working in fields related to surface
reactivity. Among the latter, and because of its most important industrial impact, catalysis has been used as the directing thread of the book.
After the preface and a general introduction to physical techniques by M. Che and J.C. Védrine, two overviews on physical techniques are
presented by G. Ertl and Sir J.M. Thomas for investigating model catalysts and porous catalysts, respectively.
The book is organized into four parts: Molecular/Local Spectroscopies, Macroscopic Techniques, Characterization of the Fluid Phase (Gas and/
or Liquid), and Advanced Characterization. Each chapter focuses upon the following important themes: overview of the technique, most important parameters to interpret the experimental data, practical details, applications of the technique, particularly during chemical processes,
with its advantages and disadvantages, conclusions.
More details
Other editions
Additional editions
Software
04/2012
Wiley-VCH
€603.05
No shipping information available
Michel Che | Jacques C. Vedrine
Characterization of Solid Materials and Heterogeneous Catalysts
From Structure to Surface Reactivity
Book
04/2012
1st Edition
Wiley-VCH
€440.00
Article exhausted; check different version
Persons
Michel Che studied chemistry and, after recruitment by CNRS, obtained his Doctorat ès Sciences (University of Lyon, F) in 1968. He worked as post-doc at Princeton University (USA) (1969-1971) and then as frequent visiting scientist at the Atomic Energy Research Establishment,
Harwell (UK) (1972-1982). He became Professor at the University Pierre & Marie Curie, Paris in 1975 and Boris Imelik Chair Professor of Institut Universitaire de France in 1995. His research concerns spectroscopy, surface reactivity and heterogeneous catalysis. He was President-Founder of the European Federation of Catalysis Societies (starting the biennial Europacat congresses) and later of the International Association of Catalysis Societies. His scientific and educational work earned him several international awards, lectureships and honorary doctorates.
Jacques C. Védrine studied chemistry and, after recruitment by CNRS, obtained his Doctorat ès Sciences (University of Lyon, F) in 1968. He worked as post-doc in USA at Varian Associates, Palo-Alto (1969-70) and at Princeton University (1970-71). He was deputy director of
the Institut de Recherches sur la Catalyse, CNRS in Lyon (1988-1998) and Chair Professor at Liverpool University, UK (1998-2003). He is one of the Editors of Appl. Catal. A: General. His research field covers physical techniques of catalyst characterization and heterogeneous catalysis for acid- and selective oxidation-type reactions on zeolites and mixed metal oxides. He was President of the European Federation of Catalysis Societies and of the Acid-Base World Organization. His scientific and educational work earned him several awards, and an honorary doctorate.
Harwell (UK) (1972-1982). He became Professor at the University Pierre & Marie Curie, Paris in 1975 and Boris Imelik Chair Professor of Institut Universitaire de France in 1995. His research concerns spectroscopy, surface reactivity and heterogeneous catalysis. He was President-Founder of the European Federation of Catalysis Societies (starting the biennial Europacat congresses) and later of the International Association of Catalysis Societies. His scientific and educational work earned him several international awards, lectureships and honorary doctorates.
Jacques C. Védrine studied chemistry and, after recruitment by CNRS, obtained his Doctorat ès Sciences (University of Lyon, F) in 1968. He worked as post-doc in USA at Varian Associates, Palo-Alto (1969-70) and at Princeton University (1970-71). He was deputy director of
the Institut de Recherches sur la Catalyse, CNRS in Lyon (1988-1998) and Chair Professor at Liverpool University, UK (1998-2003). He is one of the Editors of Appl. Catal. A: General. His research field covers physical techniques of catalyst characterization and heterogeneous catalysis for acid- and selective oxidation-type reactions on zeolites and mixed metal oxides. He was President of the European Federation of Catalysis Societies and of the Acid-Base World Organization. His scientific and educational work earned him several awards, and an honorary doctorate.
Content
PREFACE
GENERAL INTRODUCTION
OVERVIEW ON PHYSICAL TECHNIQUES FOR INVESTIGATING MODEL SOLID CATALYSTS
OVERVIEW ON PHYSICAL TECHNIQUES FOR INVESTIGATING POROUS CATALYSTS LV
VOLUME 1
PART ONE MOLECULAR/LOCAL SPECTROSCOPIES
INFRARED SPECTROSCOPY
Introduction
Principles of IR Spectroscopy and Basic Knowledge for Its Use
Experimental Considerations
Use of IR Spectroscopy to Characterize Solids
Application to Surface Reactivity: Operando Spectroscopy
Conclusion
RAMAN AND UV-RAMAN SPECTROSCOPIES
Introduction
Characterization of Active Sites and Phase Structure of Metal Oxides
Characterization of Surface Metal Oxide Species on Supported Metal Oxides
Electron-Phonon Coupling in Nanostructured Materials
Characterization of sp2 Carbon Materials
Characterization of Transition Metal-Containing Microporous and Mesoporous Materials
Synthesis Mechanisms of Molecular Sieves
Conclusions
ELECTRONIC SPECTROSCOPY: ULTRA VIOLET-VISIBLE AND NEAR IR SPECTROSCOPIES
Introduction and Overview
UV-vis-NIR Spectra
Experimental Considerations
Formation and Alteration of Solids
Surface Reactivity and Catalysis
Conclusions
PHOTOLUMINESCENCE SPECTROSCOPY
Introduction
Basic Principles of Photoluminescence
General Aspects of Photoluminescence Measurements Characterization of Catalysts by Photoluminescence and Time-Resolved Photoluminescence Spectroscopy
Investigations of the Dynamics of Photocatalysis by Time-Resolved Photoluminescence Spectroscopy
Conclusion
NEUTRON SCATTERING
Introduction
Introduction to the Theory
Experimental
Structure
Dynamics
Conclusion
SUM FREQUENCY GENERATION AND INFRARED REFLECTION ABSORPTION SPECTROSCOPY
Introduction
Theoretical Background of SFG
Spectrometer Setup
Case Studies
Conclusion
INFRA RED REFLECTION ABSORPTION SPECTROSCOPY AND POLARISATION MODULATION-IRRAS
Introduction
Principle of IRAS
Principle of PM-IRAS
Applications of IRAS and PM-IRAS
Conclusion
NUCLEAR MAGNETIC RESONANCE SPECTROSCOPY
Introduction and Historical Perspective
Theory
Popular NMR Techniques for Studying Solids
Characterization of Heterogeneous Catalysts
Porosity, Adsorption, and Transport Processes
"In Situ" NMR
Towards "Operando" Studies
Conclusion and Outlook
ELECTRON PARAMAGNETIC RESONANCE SPECTROSCOPY
Introduction
Principles of EPR
Electron-Nucleus Hyperfine Interaction
Experimental Background
Anisotropy of Magnetic Interactions in EPR: the g, A, and D Tensors
EPR Spectra and the Solid State: Single Crystal Versus Powders
Guidelines to Interpretation of EPR Spectra
Computer Simulation of Powder Spectra
Molecular Interpretation of Parameters
Quantum Chemical Calculations of Magnetic Parameters
Advanced EPR Techniques
Characteristics of EPR Techniques in Application to Catalysis and Surfaces
Interfacial and Surface Charge-Transfer Processes
In Situ and Operando EPR Techniques
Conclusions and Prospects
MÖSSBAUER SPECTROSCOPY
Introduction
The Mössbauer Effect
Radiation Source
Mössbauer Absorbers
Hyperfine Interactions
Experimental Setups
Evaluation of Experimental Data
Theoretical Calculation of Mössbauer Parameters
Common Mössbauer-Active Transitions
Survey of Applications of the Mössbauer Effect in the Study of Catalytic Materials
Conclusion
LOW ENERGY ION SCATTERING AND SECONDARY ION MASS SPECTROMETRY
Introduction
Secondary Ion Mass Spectrometry
Low-Energy Ion Scattering (Ion Scattering Spectroscopy)
Single-Crystal and Polycrystalline Metal Surfaces
Amorphous Metallic Alloys
From Model to Real Catalysts
Conclusion
X-RAY ABSORPTION SPECTROSCOPY
Introduction
History of X-Ray Absorption Spectroscopy
Principle of X-Ray Absorption Spectroscopy: XANES, EXAFS
Experimentation and Data Processing
Application to Oxide Materials
Applications to the Study of Sulfide Catalysts
Application to Metal Catalysts
Conclusion and Perspectives
AUGER ELECTRON, X RAY AND UV PHOTOELECTRON SPECTROSCOPIES
Introduction
Sources of Analytical Information
Instrumentat
GENERAL INTRODUCTION
OVERVIEW ON PHYSICAL TECHNIQUES FOR INVESTIGATING MODEL SOLID CATALYSTS
OVERVIEW ON PHYSICAL TECHNIQUES FOR INVESTIGATING POROUS CATALYSTS LV
VOLUME 1
PART ONE MOLECULAR/LOCAL SPECTROSCOPIES
INFRARED SPECTROSCOPY
Introduction
Principles of IR Spectroscopy and Basic Knowledge for Its Use
Experimental Considerations
Use of IR Spectroscopy to Characterize Solids
Application to Surface Reactivity: Operando Spectroscopy
Conclusion
RAMAN AND UV-RAMAN SPECTROSCOPIES
Introduction
Characterization of Active Sites and Phase Structure of Metal Oxides
Characterization of Surface Metal Oxide Species on Supported Metal Oxides
Electron-Phonon Coupling in Nanostructured Materials
Characterization of sp2 Carbon Materials
Characterization of Transition Metal-Containing Microporous and Mesoporous Materials
Synthesis Mechanisms of Molecular Sieves
Conclusions
ELECTRONIC SPECTROSCOPY: ULTRA VIOLET-VISIBLE AND NEAR IR SPECTROSCOPIES
Introduction and Overview
UV-vis-NIR Spectra
Experimental Considerations
Formation and Alteration of Solids
Surface Reactivity and Catalysis
Conclusions
PHOTOLUMINESCENCE SPECTROSCOPY
Introduction
Basic Principles of Photoluminescence
General Aspects of Photoluminescence Measurements Characterization of Catalysts by Photoluminescence and Time-Resolved Photoluminescence Spectroscopy
Investigations of the Dynamics of Photocatalysis by Time-Resolved Photoluminescence Spectroscopy
Conclusion
NEUTRON SCATTERING
Introduction
Introduction to the Theory
Experimental
Structure
Dynamics
Conclusion
SUM FREQUENCY GENERATION AND INFRARED REFLECTION ABSORPTION SPECTROSCOPY
Introduction
Theoretical Background of SFG
Spectrometer Setup
Case Studies
Conclusion
INFRA RED REFLECTION ABSORPTION SPECTROSCOPY AND POLARISATION MODULATION-IRRAS
Introduction
Principle of IRAS
Principle of PM-IRAS
Applications of IRAS and PM-IRAS
Conclusion
NUCLEAR MAGNETIC RESONANCE SPECTROSCOPY
Introduction and Historical Perspective
Theory
Popular NMR Techniques for Studying Solids
Characterization of Heterogeneous Catalysts
Porosity, Adsorption, and Transport Processes
"In Situ" NMR
Towards "Operando" Studies
Conclusion and Outlook
ELECTRON PARAMAGNETIC RESONANCE SPECTROSCOPY
Introduction
Principles of EPR
Electron-Nucleus Hyperfine Interaction
Experimental Background
Anisotropy of Magnetic Interactions in EPR: the g, A, and D Tensors
EPR Spectra and the Solid State: Single Crystal Versus Powders
Guidelines to Interpretation of EPR Spectra
Computer Simulation of Powder Spectra
Molecular Interpretation of Parameters
Quantum Chemical Calculations of Magnetic Parameters
Advanced EPR Techniques
Characteristics of EPR Techniques in Application to Catalysis and Surfaces
Interfacial and Surface Charge-Transfer Processes
In Situ and Operando EPR Techniques
Conclusions and Prospects
MÖSSBAUER SPECTROSCOPY
Introduction
The Mössbauer Effect
Radiation Source
Mössbauer Absorbers
Hyperfine Interactions
Experimental Setups
Evaluation of Experimental Data
Theoretical Calculation of Mössbauer Parameters
Common Mössbauer-Active Transitions
Survey of Applications of the Mössbauer Effect in the Study of Catalytic Materials
Conclusion
LOW ENERGY ION SCATTERING AND SECONDARY ION MASS SPECTROMETRY
Introduction
Secondary Ion Mass Spectrometry
Low-Energy Ion Scattering (Ion Scattering Spectroscopy)
Single-Crystal and Polycrystalline Metal Surfaces
Amorphous Metallic Alloys
From Model to Real Catalysts
Conclusion
X-RAY ABSORPTION SPECTROSCOPY
Introduction
History of X-Ray Absorption Spectroscopy
Principle of X-Ray Absorption Spectroscopy: XANES, EXAFS
Experimentation and Data Processing
Application to Oxide Materials
Applications to the Study of Sulfide Catalysts
Application to Metal Catalysts
Conclusion and Perspectives
AUGER ELECTRON, X RAY AND UV PHOTOELECTRON SPECTROSCOPIES
Introduction
Sources of Analytical Information
Instrumentat
