THERMEC 2009

Committees
Coordinators Organizers
Acknowledgements
Preface and Overview
Keynote
Next Decades' Challenges for Terrestrial Vehicles' Materials and Manufacturing to Reduce CO2 Emissions
Evaluation of the Corrosion Protection of Ultra-Thin Plasma Fluorocarbon Film Deposited on 316L Stainless Steel for Long-Term Stable Stents
Anomalous Characteristics of Ti-Nb-Ta-Zr Alloy for Biomedical Applications
Mechanical Behaviour of Metals under Explosive Loading
Environmental Cracking and Impact Investigations after Short-Term Temperature Treatments: 7050-T7451 Friction Stir Weld
Friction Stir Processing (FSP) of Cast Metals: Microstructure - Property Relationships in NiAl Bronze and AA5083
Friction Stir Welding of Ferrous Alloys: Current Status
Creep Strain Behavior in Transient Region and Minimum Creep Rate of Tempered Martensitic 9%Cr Steel
Strain Rate Effects and Hardening Mechanisms in Ni Base Superalloys
Methods for Filling Hollow Structures with Aluminium Foam
Fabrication of Hollow Nano Particles of Metallic Oxides through Oxidation Process
Status of the Development of Creep Resistant Magnesium Materials for Automotive Applications
Multi Scale Random Models of Complex Microstructures
Friction Stir Welding of Aluminium Based Composites Reinforced with Al2O3 Particles
Hierarchical Structured Nanomaterial Fabricated by Nanopowder Process: Nanopowder Agglomerate Sintering
Mechanisms of Ultrafine Grain Formation in Severe Plastic Deformation
Hydrogen Brittleness of Austenitic Steels
Advanced Bainitic and Martensitic Steels with Carbide-Free Microstructures Containing Retained Austenite
Toughness of Advanced High Strength Bainitic Steels
The Alloy Design and Thermomechanically Controlled Processing (TMCP) of Plate for High Pressure, Large Diameter Pipelines
University Impact on Thermomechanical Processing in Corus
New Trends in Advanced High Strength Steel Developments for Automotive Application
Surface Modification to Enhance Fatigue Performance of Steel: Applications of Deep Rolling
Effect of Manufacturing Process on the Final Properties of Advanced High Strength Steels for Automotive Applications
Problems and Promises of Metal Matrix Composites
Structure and Hardness of Martensite in Quenched Fe-C Steels
Effect of Carbon and Nitrogen on the Hall-Petch Coefficient of Ferritic Iron (Review on the Hall-Petch Relation in Ferritic Iron)
Lasers and Thermal Spray
Recrystallization-Texture Theories in Light of Strain-Energy-Release-Maximization
Modelling Study of Deformation Texture and Plastic Heterogeneity at Grain Boundaries and Triple Junctions
Grain Boundary Texture
Application of a High Magnetic Field during Thermo-Treatment of Metallic Materials as a Potential Means for Microstructure Modification
Advances in Thin Film Technology through the Application of Modulated Pulse Power Sputtering
Microstructure and Mechanical Properties of Dissimilar Joints of AZ31 MG Alloy to Aluminium Alloys
1. Aluminum Alloys & Aerospace Structural Metallic Materials
FE Analysis of Microstructure Evolution during Ring Rolling Process of a Large-Scale Ti-6Al-4V Alloy Ring
Matrix Coherency Strain and Hardening of Al-Mg-Si
Microstructure and Processing Ability of ?-Solidifying TNM-Based ?-TiAl Alloys
Thermomechanical Treatment of Aluminum Alloy Fin Stock for Heat Exchanger Produced by Twin Roll Strip Casting Process
Effect of Material Property Changes on the Performance of Al Rolling Mills
Continuous Casting and Rolling for Aluminum Alloy Wire and Rod
The Effect of Deformation on the Work Hardening Behaviour after Aging of Two Commercial Al-Mg-Si Alloys
Iron Removal in Aluminum Melts Containing Scrap by Electromagnetic Stirring
Effect of Aging Treatment on Properties and Microstructure of an Al-7.5Zn-1.3Mg-1.4Cu-0.12Zr Alloy
Effect of Titanium Addition on Composite L12 Precipitates in Aluminum-Zirconium Alloy
Modelling the Work Hardening Behaviour of AlMgMn Alloys
Superplasticity of a Sc and Zr Modified Al-6%Cu Alloy Subjected to ECAE
Effect of PFZ and Grain Boundary Precipitate on Mechanical Properties and Fracture Morphologies in Al-Zn-Mg(Ag) Alloys
Applicability of Adaptive Neural Networks (ANN) in the Extrusion of Aluminum Alloys and in the Prediction of Hardness and Internal Defects
Hot Deformation Behavior of Near-? Ti-Fe Alloy in (?+?) Two-Phase Region with Different Fe Content
Through Process Prevention of Recrystallization in Hot Formed Aluminium Structural Car Components
Polynomial vs. Mechanism-Based Response Surface Analysis of the Thermomechanical Treatment of Al-Sn Alloys
Recrystallization Behaviors of an Al-Zn-Mg-Cu Alloy during Multi-Pass Hot Compression
Strain Hardening and Damage in 6xxx Series Aluminum Alloy Friction Stir Welds
Effect of Mg Addition on the Mechanical Properties of Rapidly Solidified Al-Mn Alloys at Elevated Temperatures
Effects of Electromagnetic Purification on Properties of Al-RE Rod for Electrical Purpose
Alloy Constitution Dependence of Strength and Deformation in Aluminum-Titanium-Vanadium Ternary Alloys Containing Gamma+Beta Dual Phase Microstructures
Formability and Correlation between Formability Indices of Al-0.9Mg-1.0Si-0.7Cu-0.6Mn Alloy for Automotive Body Sheets
Appearance of Non-Equilibrium ?-Aluminum Grains in Hypereutectic Al-Si Alloy through Sono-Solidification
Cutting Performance of Diamond-Like Carbon Coated Tool in Cutting of Aluminum Alloys
On the Microstructures of Spray-Deposited and Homogenized Al-Zn-Mg-Cu Alloys
Three-Dimensional Characterization of Fatigue Crack Propagation Behavior in an Aluminum Alloy Using High Resolution X-Ray Microtomography
TEM In Situ Investigation on Non-Equilibrium Eutectics in Semicontinuous Casting Ingot of Al-6.2Zn-2.3Mg-2.3Cu Super-High Strength Aluminum Alloy
The Dual Nature of Precipitates in Al-Mg-Si Alloys
Roping Phenomena in Aluminium Alloy 6016: A Microtextural Investigation
Heat Treatment Variability Effects on the Mechanical Properties of Beta Solution Treated Ti-6Al-4V
On the Plastic Flow Behavior of Ti-6Al-4V Alloy during Multi-Stand Tandem Hot Rolling
Casting of Clad Strip by an Unequal Diameter Twin Roll Caster
Reliability Evaluation for Aerospace Anodizing Process of Aluminum
Phase Constitution and Heat Treatment Behavior of Titanium-Manganese Alloys
Effect of Ultrasonic Melt-Treatment on the Eutectic Silicon and Iron Intermetallic Phases in Al-Si Cast Alloys
New Multi-Material Design Concepts and High Integration Light Metal Applications for Lightweight Body Structures
Effect of ECAP on Al 6061 - FEA Approach
The Mechanical Properties of AA2024 as Function of the Interrupted Ageing Conditions
Evaluation of the Heat Treatment Role for Light Aluminum Alloys Subjected to Creep and Low Cycle Fatigue
Precipitation of ?' Phase in a Low Cost Beta Titanium Alloy
Effect of Cr and Zr Dopes on Hydrogen Behaviour in Rapidly Solidified Aluminium Foils
Change in Hardness Statistics during Isothermal Annealing of Cold-Rolled Aluminum
Phases and Structure Characteristics of the Near Eutectic Al-Sl-Cu Alloy Using Derivative Thermo Analysis
Precipitate Behavior and Microstructure Characterization of An Al-Zn-Mg-Cu Alloy Prepared by Spray Forming Process
Anisotropy of Bending Properties in Industrial Heat-Treatable Extruded Aluminium Alloys
2. Biomaterials and Materials in Biomedical Applications
Mechanical Performance of Newly Developed Titanium and Zirconium System Alloys for Biomedical Applications
Lamellar Surface Structures on Stainless Steel 316 LVM and their Influence on Osteoblastic Cells
Proliferation and Migration of Human Osteoblasts on Porous Three Dimensional Scaffolds
Haematological Performances of Carbon Coated PTFE by Plasma-Based Deposition
Numerical Simulations of the Global Behaviour of Implant Supported or Retained Dental Prostheses
Polymer Surface Processing by Atmospheric Pressure DBD for Post-Discharge Grafting of Washing-Resistant Functional Coatings
Pulsed Laser Deposition of Thin Coatings: Applications on Biomaterials
Structural Analysis of Sintered Materials Used for Low-Temperature Fuel Cell Plates
Protein Adsorption on Topographically Structured Surfaces: A Mesoscopic Computer Simulation for the Prediction of Prefered Adsorption Sites
Cyclic Deformation Behaviour and Damage Development on Different Hierarchical Levels in Cortical Bone
Crack Detection by Wavelet-Based Acoustic Emission Test In Vitro Cemented Implant
Development of Titanium-Calcium Alloy Resistant to Aqueous Fluoride Solutions
Use of Chitosan as a Material Stabilizer for Acidic Polysaccharides
Orientation of Biological Apatite in Rat Calvaria Analyzed by Microbeam X-Ray Diffractometer
Effect of Quenching and Reheating on Isothermal Phase Transformation in Ti-15Nb-10Zr Alloy
Bone Regeneration Based on Orientation of Biological Apatite (BAp) C-Axis in Osteopetrotic (op/op) Mice
Neutron Diffraction Residual Stress Evaluation and Numerical Modeling of Coating Obtained by PTA Process
A Dual Role of Copper on the Surface of Bone Implants
Haematological Performances of Carbon Coated PTFE by Plasma-Based Deposition
From Medicinal Chemistry to Functionalized Biomaterials: Development of Graftable RGD-Peptitomimetics for Cell Adhesion and Cell Addressing
Fatigue and Fretting Fatigue Behavior of Metallic Biomaterials
Recent U.S. FDA Reclassification on the Regulation of Tissue Adhesives for Skin Approximation in Clinical Applications
Coarse Grain Modeling for Microtubule Mechanics
Mechanical Properties of Ti-Cr-Sn-Zr Alloys
Mechanical Behavior Study of Plasma Sprayed Hydroxyapatite Coatings onto Ti6Al4V Substrates Using Scratch Test
Osteoblast Sensitivity to Topographical and Chemical Features of Titanium
Structural Analysis of Hydroxyapatite Sinters with Addition of ZrO2 Phase
Stress Simulation and Related Bone Ingrowth in Grooves on Implant Surface
Preparation of Silicon-Containing Poly(lactic acid)-Vaterite Hybrid Membranes
Comparison of the Cross Sectional Area, the Loss in Volume and the Mechanical Properties of LAE442 and MgCa0.8 as Resorbable Magnesium Alloy Implants after 12 Months Implantation Duration
Morphological Analysis of Hydroxyapatite Particels Obtained by Different Methods
Relevance of Static and Dynamic Recrystallizations on Austenite Grain Refinement in Nb-Mo Microalloyed Steels

In Situ Hardening Biodegradable and Malleable Polymer-Nanoapatite Composites
Gas-Discharge Plasma-Assisted Functionalization of Titanium Implant Surfaces
Enhanced Macro and Micro Stress Evaluation Diffraction Techniques Applied to Biomedical Materials
Study of Alpha-Beta Transformation in Ti-6Al-4V-ELI. Mechanical and Microstructural Characteristics
Selenium Nanocluster Coatings: Transforming Current Orthopedic Materials into Inhibiting Bone Cancer
Hydrothermal Modification of Titanium Surfaces for Controlling Osteointegration
Dielectric Properties in Fresh Trabecular Bone Tissue from 1MHz to 1000MHz: A Fast and Non Destructive Quality Evaluation Technique
Experimental Techniques to Evaluate In Vitro Trabecular Bone Properties and Emerging Numerical Model
Comparison of the In Vivo Degradation Progress of Solid Magnesium Alloy Cylinders and Screw-Shaped Magnesium Alloy Cylinders in a Rabbit Model
Synchrotron Radiation and Neutron Diffraction Study of Hydroxyapatite in Bone at the Interface with Implant
Ion Leaching from Implantable Medical Devices
Validation of a Finite Element Model by Neutron Diffraction for the Prediction of Peen Forming
3. Surface Engineering / Coatings
Microstructural and Mechanical Characterization of Gray Cast Iron and AlSi Alloy after Laser Beam Hardening
Study of the S Phases Formed on Plasma-Nitrided Austenitic and Ferritic Stainless Steels
Microstructure and Mechanical Properties of Cr-Al-B-N Coatings Prepared by Reactive D.C. and R.F. Co-Sputtering
Electrodeposition of Ferromagnetic Metal Nanowires
Surface Protection of Magnesium Alloys via Pack Cementation Coatings with Aluminum Powder and Chlorides
Shot Peening of Brittle Materials - Status and Outlook
Ceramic Target Materials for Sputtering Applications
Effect of Plasma Treatment on Adhesion of DLC Layers to Steels
Change in Surface States of Amorphous Carbon Nitride Films after Exposure to Oxygen Plasma
Effects of High Magnetic Field Annealing on the Nucleation Sites for Recrystallized Nuclei with {111} <112> Orientation in Cold-Rolled IF Steel Sheet
Study on the Dimensional Changes and Residual Stresses in Carbonitrided and Ferritic Nitrocarburized SAE 1010 Plain Carbon Steel
Mechanism of Whisker Growth Suppression by Lead Co-Deposition on Electroplated Tin Film
Production of Rapidly Solidified Composite Deposits Based on Iron with Vanadium Carbide Particles by Plasma Spraying
Wear and Corrosion Resistance of Electroless Nickel-Boron Coated Mild Steel
Mechanical Properties and Change in Microstructure in the Nitriding Process of Cu-Added Steels
Revisiting Carbon Based Metallic Compounds - Nanoscale Surface Science and Environmental Catalysis
Microstructure and Properties of Friction Surfaced Stainless Steel and Tool Steel Coatings
Nanophase Hardfacing New Possibilities for Functional Surfaces
Influence the Thermal Process of the Removing the Varnish Coats to the Cleanness of the Surface Aluminium Scrap
Unconventional Glow Discharge Nitriding of 316L Austenitic Steel
Control of Polymorphism and Mass-Transfer in Al2O3 Scale on Alumina Forming Alloys
Influence of Annealing on the Microstructure and Wear Performance of Diamond/NiCrAl Composite Coating Deposited through Cold Spraying
Microstructure and Thermal Diffusivity of Micro- and Nano-Sized YSZ
Internal Stress in EB-PVD Thermal Barrier Coating under Heat Cycle
Application of the Concept of Local Fatigue Strength after Shot Peening of Notched Components Based on Numerical Simulations
4. Composites

In Situ Observations of the Densification Behavior of WC-FeAl-B Composites during Liquid Phase Sintering
Experimental Study on Drilling Process of CFRP Composite Laminate
Properties of Small Rotary Engine Housing Fabricated by Aluminum Alloy Matrix Composites
Effect of Milling Parameters on Morphology and Grain Size of WO3 and Al Particles for Fabricating WO3/Al Composites
Evaluation of Tools and Cutting Conditions on Carbon Fibre Reinforced Laminates
Effect of Calcining Temperature of Ceramic Powders Prepared from TEOS/Boehmite Sol-Gel on Tribological Behavior of Brake Lining Materials
Effect of Alumina Fibers on Fabrication Process and Characteristics of Alumina Fiber Reinforced Aluminum Alloy Composites
High Strength Natural Fibers for Improved Polymer Matrix Composites
Characterization of Metal Matrix Composites by Synchrotron Refraction Computed Topography
Fabrication of Mo-Ti3SiC2 Layered Material by Spark Plasma Sintering and its Interface Stability at 800 degreesC
Microstructure and Sintering Behavior of Mullite-Zirconia Composites
Development of a Low Cost Process for Manufacturing of Ti-MMC by Roll-Diffusion-Bonding
High Temperature Characteristics of Unidirectionally Solidified Eutectic Ceramic Composites and some Potential Applications
Effects of Relative Density and Material Distribution on the Elastic Properties and Yield Strength of Metallic Honeycombs
Novel MEMS Fabry-Perot Interferometric Pressure Sensors
5. Dynamic Behaviour of Materials
Modeling Aspects of the Dynamic Response of Heterogeneous Materials
Shear Strength of Titanium Diboride under Shock Wave and Static Compressions
Recent Developments on the Microstructural Effects Caused by Small-Charge Explosions in FCC Alloys
Explosively Driven Expansion and Fragmentation Behavior for Cylinders, Spheres and Rings of 304 Stainless Steel
Some Trials on Underwater Explosive Welding of Thin W Plate onto Copper Substrate
Development of Compact Blast Containment Vessel for 10 kg Explosive
Phase Transition Behavior of Solids under Shock Compression
Instrumentation on Impact Shock Study of Polymers and Possibility of Non-Equilibrium Shock Hugoniot
Advanced Use of a Split Hopkinson Bar Setup for the Extended Characterization of Multiphase Steel Sheets
Impact Behavior of Concretes Taking Account of Strain-Rate Effect, Stress-State Effect and Damage Evolution

In Situ Observation of Grain Growth and Recrystallization of Steel at High Temperature
6. Fuel Cells & Hydrogen Storage Technologies
Characterization of Hydrogen Sorption Properties and Microstructure of Cast Mg-10wt%Ni Alloys
Optimal Precipitation Hardening Conditions in Lead Base Anodes for Copper Electrowinning
Influence of Processing Parameters on the Manufacturing of Anode-Supported Solid Oxide Fuel Cells by Different Wet Chemical Routes
Improvement of DMFC Electrode Kinetics by Using Nanohorns Catalyst Support
Ni-Fe-LaGaO3 Based Alloy Anode Cermet for Direct Hydrocarbon Type Solid Oxide Fuel Cell Using LaGaO3 Electrolyte
Impact of Gas-Phase Reactions on SOFC Systems Operating on Diesel and Biomass-Derived Fuels
Analytical Investigation of Fuel Cells by Using In Situ and Ex Situ Diagnostic Methods
Hydrogen Diffusion Coefficient, Hydrogen Solution Coefficient and Hydrogen Permeability of Nb-TiNi Eutectic Alloy
Electronic Stress Tensor Study of Aluminum Nanostructures for Hydrogen Storage
Micro/Nano-Structures and Hydrogen Absorption/Desorption Properties of Mg/Cu Super-Laminates
Enhanced Hydrogen Storage in MWCNTs Decorated by Electroless Nickel Nanoparticles Deposited in Supercritical CO2 Bath
A Study of GDC-Based Micro Tubular SOFC
Physical Characterization of Plasma Deposited Polymeric Proton Exchange Membrane Used in Fuel Cells
Production of Glucose by Starch and Cellulose Acid Hydrolysis and its Use as a Fuel in Low-Temperature Direct-Mode Fuel Cells
SOFC Stacks for Mobile Applications
7. Friction Stir Welding / Processing
The Use of Bobbin Tools for Friction Stir Welding of Aluminium Alloys
Study of the Key Issues of Friction Stir Welding of Titanium Alloy
Friction Stir Processing: A Novel Approach for Microstructure Refinement of Magnesium Alloys
Metallographic Study of Lapped FSW between Ductile Cast Iron and Austenite Type Stainless Steel
Limitation of Distortion in Friction Stir Welded (FSW) Panels Using Needle Peening
Structure and Mechanical Properties of Friction Stirred Beads of 6082-T6 Al Alloy and Pure Copper
Prediction and Measurements of Thermal Residual Stresses in AA2024-T3 Friction Stir Welds as a Function of Welding Parameters
Mechanical and Microstructural Characterisation of Dissimilar Friction Stir Welded AA2024-T3 and AA7075-T6 Aluminium Alloys
Spot Welding between Aluminum Alloy and Steel by Friction Stirring
Study and Researches about the Microhardness's Variation of a Special S.G. Cast Iron
Novel Approaches to Friction Spot Welding Thin Aluminium Automotive Sheet
Friction Stir Spot Welding Phenomena in Al Alloy 6061
Formability of Friction Stir Welded AZ31 Magnesium Alloy Sheets
Quantifying the Usability of a Robot System for Friction Stir Welding
Effects of Tool Design and Friction Stir Welding Parameters on Weld Morphology in Aluminum Alloys
Development of Local Reinforcement and Local Metallic Foam Using FSP
8. Intermetallics
Qualification of an Investment Casting Process for Production of Titanium Aluminide Components for Aerospace and Automotive Applications
Fabrication and Processing of Gamma Titanium Aluminides - A Review
Recrystallization Textures in Heavily Cold-Rolled Ni3Al Based Single Crystals
Comparison of Different Fluorine Treatments for the Protection of TiAl-Alloys Against High Temperature Oxidation
Hot-Workability of Gamma-Based TiAl Alloys during Severe Deformation
Ti-Al-Cr Based Coatings for High Temperature Oxidation Protection of ?-TiAl
The Effect of Impact on the TiAl Alloy TNBV3B Produced on Three Different Processing Routes
Change in Microstructure by Heat-Treatment and Corresponding Deformation Behavior in Ni3V Single Crystals
Low Cycle Fatigue and Cyclic Deformation of TiAl Alloys
Microstrain Analysis of Titanium Aluminides
Tensile Ductility of Cast TiAl Alloys
Physical and Mechanical Properties of Single Crystals of Co-Al-W Based Alloys with L12 Single-Phase and L12/fcc Two-Phase Microstructures
Various Properties of Dual-Phase Intermetallic Compound in Ni-Al System
Forging of Titaniumaluminide Parts
Microstructure and Magnetic Properties of NdFeB Magnets Using Fluorides Nano-Coated Process
The Influence of Deformation Conditions on Structure of Fe-Al Intermetallic Phase - Based Alloys
Microstructure and Mechanical Properties of a Cast Intermetallic Ti-46Al-8Ta Alloy
Comparison of Fluorination Treatments to Improve the High Temperature Oxidation Resistance of TiAl Alloys in SO2 Containing Environments
Microstructure and Mechanical Properties of Zr-Co-Ni Intermetallic Compound
Non-Destructive Fluorine Depth Profiling as Quality Assurance for the Oxidation Protection of TiAl Turbine Blades
Preparation of Homogeneous Nb-Al Intermetallic Compound Sheet by Multi-Layered Rolling and Subsequent Heat Treatment
Microstructure Formation in Cast ?-Solidifying ?-Titanium Aluminide Alloys
Second Phase Precipitation within a Laves Phase in the Ir-Y Binary System
The Effects of Heat Treatments and Tungsten Additions on Microstructures and Tensile Properties of Powder Metallurgy Ti-48Al-2Nb-2Cr
Crystal Growth and Characterization of FeAs-Based Superconductors
Study of Refined Microstructures after Two-Step Heat Treatments by Means of EBSD Technique on ?-TiAl Alloys
An Investigation of Fracture Origins in Heat-Treated Ti49Al47Cr2Nb2 Powder Compacts
Fe-6.5wt.%Si High Silicon Steel Sheets Produced by Cold Rolling
Growth of Crystals and Formation of C40/C11b Lamellar Structure in (Mo0.85Nb0.15)Si2
Effect of Trace Boron Addition on the Microstructure and Tensile Elongation of Ti2AlNb-Based Orthorhombic Titanium Alloys
9. Magnesium Alloys
DSC and Microstructural Investigations of the Elektron 21 Magnesium Alloy
Creation of Fine Structure in Magnesium Alloys by Electromagnetic Vibration Process
Effect of Cooling Rate on Morphology and Crystallography of Lath Martensite in Fe-Ni Alloys
Corrosion Protection and Microstructure of Magnesium Alloys Anodized by Phosphate Solution
Effect of Annealing on Microstructure and Mechanical Properties in Mg-Zn-Y Alloy with Long Period Stacking Order Phase
Nanocrystalline LPSO Mg-Zn-Y-Al Alloys with High Mechanical Strength and Corrosion Resistance
High Temperature Deformation of Wrought Zn-Containing Magnesium Alloys
Optimization of Heat Treatment Conditions of Magnesium Cast Alloys
Modeling Environment of Friction Stir Joining for AA2017T351 Plates in Butt Joint
Friction Stir Welding of SiCp/Al Composite and 2024 Al Alloy
Improvement of Magnesium Sheet Formability by Alloying Addition of Rare Earth Elements
Impact Properties of TIG Welded AZ31 Magnesium Alloy Joints
DC Casting - Simulation and Microstructure of Mg-Zn Alloys
Effect of Annealing Treatments on Strain Rate Sensitivity and Anisotropy in a Magnesium Alloy Processed by Severe Rolling
Extrusion of AZ31 Magnesium Sheet
Influences of Rolling Conditions on Texture and Formability of Magnesium Alloy Sheets
Mechanical Properties of Large-Scale Extruded Mg-Zn-Y Alloys
Microstructure and Creep Properties of AJ62 and AE44 Die-Casting Magnesium Alloys
Creep Behaviour of AE42 Magnesium Alloy and its Composites Using Impression Creep Technique
Effect of Rare Earth Element on Microstructure and Mechanical Properties of Mg-Sn-Ca Alloys
Modeling and Simulation of Microstructure Evolution of Cast Mg Alloy
Formability of AZ31 Alloys Prepared by Hot-Extrusion of their Machined Chips
Inhomogeneous Deformation Observed Using High-Precision Markers Drawn by Electron Beam Lithography in a Magnesium Alloy with LPSO Phase
Cross-Sectional Geometry and the Intermetallics Structure in a High Pressure Die Cast Mg-Al Alloy
Atomic Scale Simulation of Deformation in Magnesium Single Crystals
Formation of Fold Defects in Permanent Mold Cast AE42 Magnesium Alloy
Creep Behavior of Two Series Magnesium Alloys
Effects of Stacking Faults on High Temperature Creep Behavior in Mg-Y-Zn Based Alloys
Microstructure and Mechanical Properties of High Aluminum Content Magnesium Alloys Fabricated by Twin-Roll Casting Process
Rotary-Die Equal Channel Angular Pressing Method for Light Metals
10. Metallic Glasses / Bulk Metallic Amorphous Materials
Viscosity of Metallic Glass Forming Liquids: Analysis Based on Bond Strength-Coordination Number Fluctuations
Thermal and Mechanical Properties of the (Cu36Zr48Al8Ag8)100-xSix (x = 0-1) Amorphous Alloys
Inhomogeneous Amorphous Structure of Bulk Metallic Glasses Examined from Structural Relaxation Kinetics
The Prediction of Glass-Forming Compositions in Metallic Systems - The Development of New Bulk Metallic Glasses
High Plastic Ti66Nb13Cu8Ni6.8Al6.2 Composites with In Situ ?-Ti Phase Synthesized by Spark Plasma Sintering of Mechanically Alloyed Glassy Powders
Molecular Dynamics Study on Structural Relaxation of Metallic Glasses
Analysis of Optical Properties of GaN/AlGaN Quantum Well Ultra-Violet Laser Diode Using 6X6 Hamiltonian
Fatigue Crack Initiation and Propagation at a Sharp Notch in Zr-Based Bulk Metallic Glass
Glass Formation and Structural Study of Ti50Cu50 Alloy by Molecular Dynamics
The Role of Casting Temperature in Preparation of Bulk Metallic Glasses

In Situ Observation of Solidification of Bulk Metallic Glass Forming Alloys from Supercooled Liquid by Using High Energy X-Ray Diffraction Combined with Levitation Techniques
11. Nanostructured Materials, Powder Metallurgy & Metallic Foams
Roles of Hydrogen Atmospheres in Growth of Ultrananocrystalline Diamond by Pulsed Laser Deposition
Nanograined Size Pure Iron Elaborated by Means of Spark Plasma Sintering
Carbon-Based Magnetic Nanocomposite Prepared by Arc-Evaporation of Sm/Co/C System
Principles of Fabrication of Bulk Ultrafine-Grained and Nanostructured Materials by Multiple Isothermal Forging
Characterization of FePt Nanopowder Synthesized by a Chemical Vapor Condensation (CVC) Process
Fabrication of Ultra-Fine Grained Hot Work Tool Steels by Powder Metallurgy Process through Mechanical Alloying Treatment
Fabrication of Metallized Electrospun Copper Nanofiber Webs
Formation of High Density Metal Silicide Nanodots on Ultrathin SiO2 for Floating Gate Memory Application
Grain Boundary Nanostructure and High Temperature Plastic Flow in Polycrystalline Oxide Ceramics
Crystallographic Features of Ferroelectric States around the Tetragonal /Rhombohedral Phase Boundary in Pb1-xLax(Zr1-yTiy)O3
Magnetic Properties, Nanostructure, and Ordering Kinetics of Nb Additive FePtCu Films
Study on the Nanostructure and Magnetic Properties of NdFeNbB Permanent Magnets
Characterization and Sintering Behaviors of Fe Based Nanopowders Prepared by Arc Discharge Process
Stability of the Orbital-Modulated State in the Layered Perovskite Manganite Sr2-xRxMnO4 (R = Pr, Nd)
Carbon Nanostructures Produced by an AC Arc Discharge
Measurement of Elastic Constants on Nanostructured Iron and Copper
Dispersion of Nano-Materials into Polymeric System for Enhanced Properties
Preferred Orientation of Cu2O Nano-/Micro-Protrusions Grown by Ar Ion Irradiation
Effects of Nano / Meso Harmonic Microstructure on Mechanical Properties in Austenitic Stainless Steel Produced by MM / HRS Process
A Study on the Optimization of Reduction-Diffusion Process for Synthesis of Sm2Fe17Nx Nanopowder
Effect of Die Temperature on Mechanical Properties of Hot Pressed P/M Parts
Development of Powder Metallurgy High Nitrogen Stainless Steel
WC-8Co-2Al (wt%) Cemented Carbides Prepared by Mechanical Milling and Spark Plasma Sintering
Mechanically Alloyed and Spark Plasma Sintered Aluminium/Precious Metal Oxide Composite Materials
Comparison of Structure and Properties of Hard Coatings on Commercial Tool Materials Manufactured with the Pressureless Forming Method or Laser Treatment
Cutting Mechanism of Resin Impregnated Sintered Iron
Properties of Al-Si-Fe-Cu-Mg Alloy PM Composites Obtained by Closed - Die Forging and Heat Treatment
Study on Bending Ultrasonic Fatigue Behavior of Sinter-Hardened Fe-2Cu-2Ni-1Mo-1C Materials Prepared by Warm Compaction
Development of Powder Metallurgy High Speed Steel
Combustion Synthesis of Titanium-Based Cemented Carbides
Investigation of the Mechanical Properties of Lotus-Type Porous Carbon Steel Made by Continuous Zone Melting Technique
Micro-Structural Alterations in MoM Hip Implants
A Theoretical and Experimental Study on the Dynamic Constitutive Model of Aluminum Foams
Heat Transfer and Fluid Flow in Sintered Metallic Fiber Structures
Microstructure and Compression Properties of Al-Si Alloy Foams by Spark Plasma Sintering Technique
12. Severe Plastic Deformation
Influence of Annealing on Strength of Ultrafine Grained Low Carbon Steels by ECAP
Recrystallization Mechanisms in Severely Deformed Dual-Phase Stainless Steel
Improvement in Drawability (r Value) of an Aluminum Alloy Subjected to Groove Pressing
Recent Development of Equal Channel Angular Rolling (ECAR)
Comparison for Thermoelectric Properties of BiTe Based Semiconductor Processed by the Mechanical Alloying and the High Pressure Torsion after Melt Grown by the Vertical Bridgman Method
Accumulative Roll Bonding of 7075 Aluminium Alloy at High Temperature
Grain Refinement of Vanadium by Low Temperature Severe Plastic Deformation
Numerical Analysis of the Microstructure and Mechanical Properties Evolution during Equal Channel Angular Pressing
Microstructures of Aluminum and Copper Single Crystals Processed by Equal-Channel Angular Pressing
Mechanical Properties of an Al-Mg-Sc Alloy Subjected to Intense Plastic Straining
Dislocation-Source Hardening in Nanostructured Steel Produced by Severe Plastic Deformation
Characteristics of High Temperature Creep in Pure Aluminum Processed by Equal-Channel Angular Pressing
Grain Refinement Efficiency in Equal Channel Angular Extrusion of FCC Metals Inferred from Crystal Plasticity Simulations of Slip Activities
On the Utilization of Plastic Instability Criterion in Ductility Assessment of Ultrafine-Grained Microalloyed Steel
Ultrafine Grain Evolution in Copper Alloys Induced by Mechanisms of Continuous Dynamic and Static Recrystallization
Effect of Equal Channel Angular Pressing on the Pitting Corrosion Resistance on the Aluminum Alloys with/without Anodization
EBSD Characterization of Pure Iron Deformed by ECAE
Structure, Chemical Stability and Properties of NiAl-Al2O3 Interface Modified by hBN and MAX-Phase Interlayers
Thermo-Mechanical Problem of Torque in Beam with Annular Cross-Section
Effect of Preliminary Treatment on Grain Refinement of Medium Carbon Steel Using ECAP at Increased Temperature
13. Smart / Intelligent Materials / Processes
Solubility Control of ?TCP-HAp Functionally Graded Porous Beads in SBF for Biomaterial Use
Using Thin Film Stress for Nanoscaled Sensors
A Systematic Approach to Performance Evaluation of Shape Memory Alloys as Actuator Material
Structure and Phase Stability of NiMnGa Ferromagnetic Shape Memory Alloys by Experimental and Ab Initio Techniques
Effect of Carbon Addition of Shape Memory Properties of TiNb Alloys
Recent Advances in Microwave, Millimeter-Wave and Plasma-Assisted Processing of Materials
Design of Joint Properties by Friction Powder Processing
Stress Amplitude Dependence of Internal Friction in TiNbAl Shape Memory Alloy
Shape Memory Behavior of Ti-Ni-X (X= Pd, Cu) Ternary Alloy Thin Films Prepared by Triple-Source DC Magnetron Sputtering
Closed Cellular Materials for Smart Materials
Heating Behaviors of Powdered Metal Silicon Compact Under Microwave Irradiation
Laser Sintering of Silver Nanoparticles for Electronic Use
Synthesis of New Structural and Functional Materials by SPS Processing
Influence of High Melting Glasses on Selected Properties of PtRh-Alloys for Application in Glass Fiber Bushings
Metal-Containing Diamond-Like Carbon Coating as a Smart Sensor
Influence of Internal Pulsed Current on the Sintering Behavior of Pulsed Current Sintering Process
Thermal Properties of Diamond-Particle-Dispersed Cu-Matrix-Composites Fabricated by Spark Plasma Sintering (SPS)
Electron Beam Surface Modification of Cobalt Chrome Molybdenum Alloy Formed by a Laminate Molding Method
Preparation of Ti-Based and Zr-Based Bio-Metallic Wires by Arc-Melting Type Melt-Extraction Method
Second Step Approach for Self Healing Ceramics
Properties of New TiC/TiB2/Fe-Al Cermet Alloy
Al/Ni Self-Propagating Exothermic Film for MEMS Application
High-Temperature Oxidation Resistance and Crack-Healing Function of Ni/Al2O3 Nano-Hybrid Materials
(Zn,Mn)Te-Based Nanowires for Spintronic Applications: A TEM Study of Structural and Chemical Properties
Fabrication of Cu-Based Functionally Graded Materials Dispersing Fine Sic Particles by a Centrifugal Mixed-Powder Method
FEM Analysis of Joint Interface Formation in Magnetic Pressure Seam Welding
Microstructure and Thermoelectric Properties of Al-Doped ZnO Sintered Body
Electrochemical Characteristics of Pure Titanium Produced by MIM (Metal Injection Molding) Process
Preparation of Lithium Sulfide-Carbon Composites Using Spark-Plasma-Sintering Process and their Electrochemical Properties
Fabrication and Two-Way Deformation of Shape Memory Composite with SMA and SMP
Investigation of Lattice Contraction in Mn3XN(X=Zn, Cu, Sn)
Training Effects on Damping Capacity in Fe-Mn and Fe-Mn-Cr Alloys
14. Superalloys & Heat Resistant Steels
Influence of Plastic Deformation on Recrystallized Microstructure of Fe-Base ODS Alloy
Two-Phase Microstructures Formed by Phase-Separation of Coherent Precipitates in Elastically Constrained Alloy Systems
Mechanisms of New Grain Formation in a Ni-20%Cr Alloy during Warm to Hot Working
Characterisation of the Structure of Single-Crystal Nickel-Base Superalloys
Virtual Jet Engine System
A Study on the Formation of Serrated Grain Boundaries and its Applications in Nimonic 263
Simulation of the Solidification Parameters of Single Crystal Casting
Role of Rhenium in Single Crystal Ni-Based Superalloys
Fabrication Process for a High Strength 9Cr-2W Steel Sheet
Dislocation Substructure of Single Crystal Ni-Based Superalloy, CMSX-4, Crept at 1073-1273K and 250-600MPa
Phase-Separation of B2 Precipitates in an Fe-Ni-Al Alloy
Effects of Surface Recrystallization on the Microstructures and Creep Properties of Single Crystal Superalloy DD6
Analysis of Creep Curves of Haynes 230 Superalloy
Morphology of ?' Precipitates in Second Stage High Pressure Turbine Blade of Single Crystal Nickel-Based Superalloy after Serviced
New Creep Deformation Concept Based on Creep under Lower Stresses
Modeling Grain Boundary Mobility during Dynamic Recrystallization of Metallic Alloys
Creep Behavior and Microstructure of 8Cr Oxide Dispersion Strengthened Martensitic Steel
Microstructure Evolution in a 9%Cr Heat Resistant Steel during Creep Tests
Dynamic Recrystallization Modeling during Hot Forging of a Nickel Based Superalloy
Metadynamic Recrystallization of the Nickel-Based Superalloy Allvac 718PlusTM
Effect of Thermomechanical Processes on ?3 Grain Boundary Distribution in a Nickel Base Superalloy
Directional Diffusion and Effect Factors of the Elements during Creep of Nickel-Base Single Crystal Superalloys
Phase Transformation Behavior of Boron Containing 9% Cr Heat Resistant Steels
Heat Treatment and Oxidation Characteristics of Nb-20Mo-15Si-5B-20(Cr,Ti) Alloys from 700 to 1400 degreesC
Dynamic Recrystallization Behavior of GH4586 Superalloy during Hot Compression
The Precipitation Strengthening Effect of Nb, Ti and Al in Cast/Wrought Ni-Base Superalloys
Study on the Ultrahigh Speed Grinding of Superhard Materials with Squeeze Film Damping Technology
The Halogen Effect for Ni-Base Superalloys - A Thermodynamic Study
15. Residual Stresses & Tomographic Methods in Materials Science
Residual Stress in PVD-Coated Carbide Cutting Inserts - Applications of the sin2? and the Scattering Vector Method
Influence of Steel Grain Size on Residual Stress in Grinding Processing
X-Ray Investigation on Strength of Thin Films
The Effect of Grain Size on Strain Determination Using a Neutron Diffractometer
Development of Twin Fractions and Microstresses of the Hot Extruded Magnesium Alloy AZ31 under Cyclic Loading Conditions
Single Crystal Elastic Constants of the MAX Phase Ti3AlC2 Determined by Neutron Diffraction
Real Time Monitoring of the Strain Evolution during Rapid Heat Treatment of Steel Samples by Means of Synchrotron X-Ray Diffraction
Residual Stresses Relaxation Caused by Pulsed Electric Current
The X-Ray Diffraction Characteristics of Different Materials
Analysis of Residual Stress for Butt Welding of Thick Plate
Induction of Engineered Residual Stresses Fields and Associate Surface Properties Modification by Short Pulse Laser Shock Processing
Residual Stress Measurement by Neutron Diffraction in a Single Bead on Plate Weld - Influence of Instrument and Measurement Settings on the Scatter of the Results
A Study on Area Detector Type Diffraction Stress Measurement and its Application to Shelling Problem in Railway Tracks
Residual Stress Depth-Profiling in Shot-Peened Al Alloy Components Subjected to Fatigue Testing
The New GKSS Materials Science Beamlines at DESY: Recent Results and Future Options
Transmission Imaging and Strain Mapping in the Vicinity of Internal Crack Tip Using Synchrotron White X-Ray
High Temperature Internal Friction Behavior of Unidirectionally Solidified Al2O3/YAG Eutectic
A Step towards a Complete Uncertainty Analysis of Residual Stress Determination Using Neutron Diffraction
Industrial Research and Development with Synchrotron Radiation
Comparison of the Mechanical Properties of Hastelloy X Material after Welding by GTAW and Nd-YAG Laser
Hierarchical 3D/4D Characterization on Deformation Behavior of Austenitic and Pearlitic Steels
Investigation of Sintering Processes by Tomography
Electron Tomography of Nanostructured Materials - Towards a Quantitative 3D Analysis with Nanometer Resolution
Three-Dimensional Visualization and Analysis of Grain Deformation by Means of Synchrotron Radiation
16. Modelling & Simulation / Multiscale Mechanical Modelling
Investigation of the Surface Characteristics for the Micro-Cutting Process with Finite Element Simulation
Mathematical Modeling of Microstructure Evolution of V Steels during Hot Rolling of Seamless Tubes
A Model of Discontinuous Dynamic Recrystallization and its Application for Nickel Alloys
Variational Aspects of the Physically-Based Approach to 3D Non-Local Continuum Mechanics
Fractal Model for Snow
Micro-Polar and Second Order Homogenization of Periodic Masonry
Multiscale CAFE Modelling of Dynamic Recrystallization
The Microstructure Change during Modeling of Conventional and Thermo-Mechanical Rolling of S355 Steel Bars
Simulation of Copper Precipitation in Fe-Cu Alloys
The Analysis of the Process of Asymmetric Rolling of Plates
Physical Simulation at Hot Deformation
Anisotropic Ostwald Ripening in Silicon Nitride: On the Reaction-Controlled Kinetics
The Physical Simulation of the Normalizing Rolling of the Steel Plate in Strength Category 350/460MPa
The Analyze of Phase Transformations in Ultra Fine Grained Constructional Steel
High-Temperature Testing of the Properties of Blast Furnace Coke
Combined Discrete/Finite Element Multiscale Approach for Modelling of the Tool/Workpiece Interface during High Shear Processing: Hot Rolling and Friction Stir Welding Applications
The Influence of Rolling Temperature on the Energy and Force Parameters during Normalizing Rolling of Plain Round Bars
Modeling the Effect of Stress and Plastic Strain on Martensite Transformation
Sensitivity Analysis as a Tool of Optimal Sensors Location for Solidification Parameters Estimation
Simulative Accelerated Creep Test on Gleeble
Simulation of Evolution of Dual-Phase Microstructure
Strength of Alloyed Metal Castings Using Multiphase Models and Non-Linear FEM
Design of Process Equipment Beam Joints to Utilise Stress Relaxation
Numerical Simulation of the Portevin - Le Chatelier Effect in Various Material and at Different Scales
Numerical Modeling of Casting Solidification Using Generalized Finite Difference Method
Numerical Thermo-Mechanical Modelling of Stress Fields and Residual Constraints in Metallic Targets Subject to Laser Shock Processing
A Model for Nucleation and Growth Processes of Tin Whisker
The Use of Model Systems Based on Fe-30%Ni for Studying the Microstructural Evolution during the Hot Deformation of Austenite
Rheological Behavior of Pure Binary Ni-Nb Model Alloys
Thermal Behaviour of Steel Plate during Accelerated Cooling
Interaction of the Precipitation Kinetics of ? And ?' Phases in Nickel-Base Superalloy ATI Allvac (R) 718PlusTM
Heat Transfer Coefficient Measurements (HTC) at the Metal-Mould Interface in Permanent Mould Casting
Modelling of Grain Boundary Stability of Materials under Severe Plastic Deformation and Experimental Verification
Calculation of Energies of Coherent Interfaces and Application to the Nucleation, Growth and Coarsening of Precipitates
Modeling and Optimization of Cross-Sectional Microstructure Distribution during Hot Rolling of HSLA Steel Plates
Multiscale Modelling of Gradual Degradation in Al2O3/ZrO2 Ceramic Composites under Tension
Microcracked Materials as Non-Simple Continua
Coupling Continuum and Discrete Models of Materials with Microstructure: A Multiscale Algorithm
X-Ray Computed Tomography Based Modelling of Polymeric Foams
Homogenization of Out-of-Plane Loaded Random Plates
Modeling of Microstructure Evolution in Process with Severe Plastic Deformation by Cellular Automata
17. Texture
Microstructure and Texture Evolution in Cold Rolled Interstitial Free (IF) Steel Sheet during Annealing under AC Magnetic Field
Mechanism on Heterogeneous Nucleation of the Primary Al Phase on TiAl3 of a Hot-Dip Zn-11%Al-3%Mg-0.2%Si Coating on Steel Sheet
Effect of Deformation Mode on Texture of Ultrafine-Grained Low Carbon Steel Processed by Warm Caliber Rolling
Study on Evolution of Partial Texture of Different Grains during Grain Growth in IF Steels
Phase Alignment Based on Crystal Orientation In Mn-Sb and Al-Ni Alloys Induced by High Magnetic Fields
Crystallographic Textures Variation in Asymmetrically Rolled Steel
The Effects of Different Precipitation States on the Annealing Behaviour of AA6111
Texture and Strain Experiments at OPAL
Microstructure and Texture Optimization in Fe-Si Ferritic Steels
Texture and Substructure Development during Dynamic Recrystallization in Ni-30Fe Austenite
Effect of Plating Current Density and Frequency on the Crystallographic Texture of Electrodeposited Copper
A Variant Selection Rule in Transformation in Steel and Prediction of Transformation Texture
Structure/Property Relationship in Intergranular Corrosion of Archaeological Silver Artefacts
Grain Boundary Sliding Phenomenon and Its Effect on High Temperature Ductility of Ni-Base Alloys
Relations of Initial Microstructure with Grain Boundary Character Distributions in a Cold Rolled and Annealed Lead Alloy
Features of Highly Twinned Microstructures Produced by GBE in FCC Materials
Application of Laser Surface Remelting in Grain Boundary Engineering
Grain Boundary Character of 9Cr Feritic/Martensitic Heat Resistant Steels Strengthened by Nano-Sized MX Precipitates
18. Thin Films
Effects of Thermal Annealing on Electrical, Optical and Structural Properties of Ga-Doped ZnO Films
Optical-Electrical Properties and Corrosion Behavior of Tantalum-Doped Indium Tin Oxide Films Deposited by Magnetron Sputtering
Growth Stresses and Phase Development in Nanostructured Oxide Scales Formed on Iron Aluminides
Thin Film Depositions of CdTe Semiconductors on Amorphous and Single Crystal Substrates and Comparisons of their Properties
Single Crystalline a-Axis Mg Doped ZnO Thin Films Prepared by Sol-Gel Technique for Optoelectronics Applications
Growth of Cubic AlN Films on Sapphire(0001) with Atomic Scale Surface Smoothness by Pulsed Laser Deposition
Ultrananocrystalline Diamond/Hydrogenated Amorphous Carbon Films Prepared by a Coaxial Arc Plasma Gun
Effect of Nano-Crystallization on the Mechanical Properties of the (Zr53Cu30Ni9Al8)99.5Si0.5 Bulk Metallic Glass
Structural Changes in Nickel Silicide Thin Films under the Presence of Al and Ga
Tailoring Exchange Coupling between Magnetic Nano-Grains of High Density Magnetic Recording Media
A Study on Hydrogen in Titanium Thin Films

In Situ S-Doping of Cubic Boron Nitride Thin Films by Plasma Enhanced Chemical Vapor Deposition
Doping of ZnO Thin Film with Eu Using Ion Beams
19. Steels & Thin Slab and Strip Casting
Work Hardening and Tensile Behaviour of an Austenitic Stainless Steel at High Temperature
Influence of Molybdenum and Copper on the Corrosion Resistance of High Strength Austenitic Steels
Phase Transformation in Duplex Stainless Steels after Isothermal Treatments, Continuous Cooling and Cold Working
Effects of Deformation Mode on Resistivity Curve Used for Estimating Martensite Induced in Stainless Steel
Multiaxial Forging of Super Duplex Steel
Reasons for Formation of Twin-Precipitates in Two Phase Stainless Steel
Recrystallization of Coarse-Grained Nb-Containing AISI-430 Ferritic Stainless Steel
Energy of Interatomic Bonds in Austenitic Steels
The Activity of Nitrogen in the Liquid Fe-N-Cr Alloy Based on the Non-Random Solubility Model by Schmid - Fetzer
Dissolution and Precipitation of Excess Phases in High-Nitrogen Steels
Recent Progress and Application of Bainite Steels for High Strength Linepipe up to X120
Mn-Series Low Carbon Air Cooling Bainitic Steels Containing Niobium
Key Factors in Grain Refinement of Martensite and Bainite
Further Corrosion Behaviors of Low Carbon Bainitic Steel in the Environment Containing Cl- after the Rust Layer Damaged
Cyclic Deformation and Fatigue Crack Behavior of Extruded AZ31B Magnesium Alloy
Designing Local Properties of Constructional Elements by Local Use of Ageing Effects in Multiphase Steels
Effect of Thermomechanical Processing Parameters on the Final Microstructure of Pipeline Steels
Hot Forging of Ultra High-Strength TRIP-Aided Steel
Formation of Martensite Austenite Constituent in Continuously Cooled Nb-Bearing Low Carbon Steels

In Situ High Temperature X-Ray Studies on Bainitic Transformation of Austempered Silicon Alloyed Steels
Effect of Cold Deformation on Thermal Stability of Bainite in Nb-Bearing Microalloyed Steels
Influence of Heat Treatment on the Microstructure of a High Chromium Steel Used for the Manufacture of Rolling Rolls
Investigation of Bar-Like Carbides in HR3C Boiler Steel
Design of Modern Steels for Automotive Application
Melting and Solidification in the System Fe-Mn-C
Technologies of Nanomodification of Low-Carbon Low Alloyed Steels
Mechanical Properties and Forming Behavior of a Type 9%Cr Steel Containing 2%W
Homogenization Strategy and Material Characterization of High-Manganese TRIP and TWIP Steels
Refinement of CFB/M High Strength Steel Micro-Alloyed with Nb
Microstructural Evaluation of API 5L X80 Pipeline Steels Submitted to Different Cooling Rates
Hot Deformation and Ductility Analysis of Continuous Cast C40 Steel by Means of Tensile and Compression Tests
Analysis of Hot Tensile and Compression Curves to Assess the Hot Ductility of C-Mn Steels
Comparative Study of Various Data Conversion Methods for Torsion Tests Applied to a HSLA Steel
Analysis of the Redundant Deformation Factor in the Axisymmetric Drawing of AISI 304 Stainless Steel Bars through Experimental Techniques
Numerical Simulation of Steel Flow and Behaviour of Non-Metallic Inclusions in the Six-Strand Tundish with Stopper Rod System
Dissolution of Precipitates in Hot Rolled Low Mn, Ti Added Pipeline Steels
Microstructure and Cleavage Resistance of High Strength Steels
Creep Behavior of an Oxide Dispersion Strengthened Iron with Ultrafine Grain Structure
Effect of Prior Heat Treatment on Hardness Profile after Nitrocarburization in Medium Carbon Steel
Towards Understanding the Development of Grain Boundary Clusters in Austenitic Stainless Steel
Effect of Grain Boundary Segregation of Phoshorus on the Hall-Petch Coefficient of Ferritic Iron
Strengthening of Ferritic Steel by Interface Precipitated Carbides in Rows
Microstructure Evolution of C-Mn-Si-Al-Nb High-Manganese Steel during the Thermomechanical Processing
Isothermal and Thermal Fatigue of Tool Steel AISI H11
Simulation of Thermo-Mechanical Controlled Rolling and Continuous Cooling of Wire Rods
Microstructure and Mechanical Properties of Cooled and Tempered Cu and Nb-Bearing Ultra-Low Carbon Steels
Dependence of Yield Strength on Ferrite Grain Size in Ferrite/Cementite and Ferrite/Pearlite Structures of Medium Carbon Steel
Fatigue Performance of Laser Brazes in Advanced High Strength Steels
Effect of Si on Mechanical Property of Galvannealed Dual Phase Steel
Microstructure and Mechanical Properties of Ultra-High Strength Steel Plates with High Deformability
Microstructure and Texture Evolution in a High Manganes Austenitic Steel During Tensile Test
Static Strain Ageing in Some Austenitic Stainless Steels
Study of the Columnar Grain Growth in IF Steels during Continuous Heat Cycles
A Technical and Economic Analysis of Pig Iron Production
Action of Displacement Control on Vacuum Free Aluminum/Copper Diffusion Liquefaction Bonding
Bending Property of Liner Laser Irradiated Thin High Carbon Steel
Effect of Martensite in Initial Structure on Bainite Transformation
Effects of Manganese Content and Heat Treatment Condition on Mechanical Properties and Microstructures of Fine-Grained Low Carbon TRIP-Aided Steels
First-Principles Calculations and the Thermodynamics of Cementite
Calculation of Stress-Strain Curve of Two-Phase Microstructure on the Basis of the Extended Secant Method
Modeling of Phase Transformation and Carbon Behaviors after Holding at ?/? Region and Controlled Cooling in Low Carbon Steels
The Effect of Cooling Rate on the Damage Micromechanisms of DP Steels
A View on the Strategy in the Processing of Hot Rolled Dual Phase Steels
Effect of Coiling Temperature on Microstructure and Mechanical Properties of a Nb-V Microalloyed Steel
A Study of the Carbides in High-Speed Steel Rolls
Ductility of Microalloyed Steels during Hot Deformation
Microstructure and Mechanical Properties of Low Carbon Al-Killed Steels after Ultra-Rapid Annealing Cycles
Effect of Retained Austenite Stability on Mechanical Properties of 590MPa Grade TRIP Sheet Steels
Successful Transition from Wrought Iron to Steel in Hot Work Processing with Mechanism Differences
Effects of Nb, V, Ti and Al on Recrystallisation/Precipitation Interaction in Microalloyed Steels
Monitoring Phase Transition Kinetics in Austempered Ductile Iron (ADI)
Alloying Effects on Reverse Transformation to Austenite from Pearlite or Tempered Martensite Structures
Grain Refinement Mechanisms of Plain C-Mn Steel by Super Short Interval Multi-Pass Rolling in Stable Austenite Region
Friction and Wear Properties of Zr and TiC-Based Cermet Specimens in a Hydrogen Gas Atmosphere
Influence of Strain Path on Microstructure Evolution of Low Carbon Steels
Temperature Dependence of Austenite Nucleation Site on Reversion of Lath Martensite
Influence of High-Mobility Boundaries on the Selective Growth of Goss Grain in Grain-Oriented Electrical Steel
High Corrosion Resistance 21%Cr-0.4%Cu Ferritic Stainless Steel Contributing to Resource Conservation
Microstructure and Toughness of 1000 MPa High Strength Weld Metal
OIM Analysis of Microstructure and Texture of a TRIP Assisted Steel after Static and Dynamic Deformation
Mechanical Properties of a Medium Carbon Low Alloy Steel Processed by Two Step Austempering Process
Influence of V and N on Transformation Behavior and Mechanical Properties of Medium Carbon Forging Steels
Linking Crystallographic, Chemical and Nano-Mechanical Properties of Phase Constituents in DP and TRIP Steels
Genetic Alloy Design of Ultra High Strength Stainless Steels: From Thermodynamics to Quantum Mechanics
Influence of Continuous Annealing Conditions on the Microstructure and Mechanical Properties of a C-Mn Dual Phase Steel
The Complexity of the Microstructural Changes during the Partitioning Step of the Quenching and Partitioning Process in Low Carbon Steels
Precipitation and Precipitation Hardening Behavior of V and/or Cu Bearing Middle Carbon Steels
Comparison of Grain Growth between Fine-Grained and Coarse-Grained Austenite in a Nb-V-Ti Microalloyed Steel
Modeling of C-Mn Chromium Containing Steel to Produce DP600 through Thin Slab Direct Rolling
The High Nb Content Microalloying Approach for Developing High Performance Structural Steel
Direct Observation of the Change in Microstructure with Deformation in Ferrous Lath Martensite by Using Micro-Sized Specimen
The Formation of Multiphase Microstructures in Low-Alloy Steel
The Influence of Deformation on Microstructure Evolution of Low Alloy TRIP Steel
Evaluation of Hydrogen Embrittlement for High Strength Steel Sheets
Formability of Ultrafine Grained Steel
Effect of Grain Refinement on Mechanical Properties in 25Cr-1N Austenitic Steel
Development of 780MPa Grade Steel Plate by Microstructural Control Containing M-A through the On-Line Heating Process
Effect of Hot and Cold Rolling on Grain Size and Texture in Fe-Si Strips with Si-Content Larger than 2 wt%
Control of the Austenite Recrystallization in Niobium Microalloyed Steels
Precipitation Behavior of Steels with Various Copper during Continuous Cooling
Temperature Development during Step-Wise Tensile Tests on a TRIP Steel
Static and Impact-Dynamic Characterization of Multiphase TRIP Steels
Microstructure and its Formation Mechanism of Weld Metal of Al-Bearing TRIP Steel
Discontinuous Precipitation in a High-Nitrogen Austenitic Steel
Transverse Surface Cracks in Continuously Cast Steel Slabs, Oscillation Marks and Austenite Grain Size
20 Years of Experience in Thin Slab Casting and Rolling State of the Art and Future Developments
High Temperature Deformation Mechanisms and Processing Map for Hot Working of Cast-Homogenized Mg-3Sn-2Ca Alloy
Recent Developments and Future Potentials of Near Net Shape Casting Belt Casting Technology
Effects of Casting Flux Interaction with Steel Melt on Lubrication in CC Moulds
Near-Net-Shape Casting of Steel - The Belt Casting Technology
20. Welding & Joining
Physical and Chemical Mechanisms Occuring during A-TIG Welding: Comparison between Experimental Investigations and Simulations
Proper Design and Fabrication of Socket Welds for Use in Sour Service
Effect of Post-Weld Heat Treatment on Nd: YAG Laser Welded Ti-6Al-4V Alloy Quality
Friction Stir Welding of Dissimilar AA 2024-T3 to AZ31B-H24 Alloys
Butt Joining of High Strength Steel Sheet and Dissimilar Metal Sheet by Shot Peening
Weld Pool Shaping and Microstructural Control Using Novel Computer Generated Holographic Optic Laser Welding of Steel and Stainless Steel
Consideration on the Toughness Requirement to the Austenitic Weld Metal in the LNG Storage Tanks Subjected to a Partial Height Hydro Test
Effect of Oxygen Content on Toughness in High Strength Weld Metal
Comparison of Microstructures at As Welded Zone and Reheated Zone in 9%Ni Steel Similar Composition Weld Metal
Research on High Heat Input Welding of the High Strength Electro-Gas Flux-Cored Wire Used for Large Storage Tank
Mictrostructure and Mechanical Property Development in the Heat Affected Zone of Ultrafine Grained HSLA Steel
Influence of the Hardening Model on the Predicted Welding Distortion of DP600 Lap Joints
Thermomechanical Joining of Aluminium Alloys: Effects of the Shear on the Quality of the Joining

In Situ Observation of Solidification Behavior during Welding
Fatigue Behaviour of Friction Stir Processed Cast Aluminium and Magnesium Alloys
Effect of Weld Tip Geometry on Ultrasonic Welding of Aluminum Alloy
Characteristics of Laser Welded Joints of HDT580X Steel
Effect of Boron Carbide Addition on Wear Behaviour of Cobalt Based Hardfacings by Plasma Transferred Arc Process
Intelligent Control of Arc Welding Dynamics during Robotic Welding Process
Interfacial Behavior of Dissimilar Friction Welded Nodular Cast Irons with Low Carbon Steels
A Weldability Study of Nickel-Iron-Cobalt Hydrogen Resistant Alloys Using Weld Simulation in Parallel with Variable Restraint Testing

In Situ Observation of Phase Transformations during Welding of Low Transformation Temperature Filler Material
Microstructure of Bonding Interface in Explosively Welded Metal/Ceramic Clad
Friction Welding Structures of Carburized Steels
Bonding and Separation Behaviors between Ti-Sn Alloys and High Carbon Steel
Experimental Setup for the Determination of Mechanical Solder Materials Properties at Elevated Temperatures
Weldability Study of Aluminum Alloys Using Weld Simulation and Complimentary Variable Restraint Testing
The Mechanism of Failure of the Axisymmetrical Welded Joint under Thermomechanical Loading
Microstructure Evolution of Sn-2.5Ag-2.0Ni Solder Joint with Various Ni Platings on SiCp/Al Composites
21. Mechanical Behaviour & Fracture
Effect of Plastic Anisotropy on the Predictive Capacity of Flaw Assessment Procedures
Incompatibility Stresses and Elastic Energy Stored in Polycrystalline Materials
Effect of Strain Heterogeneity on the Recrystallization Behavior of an Oxide Dispersion Strengthened Ferritic Alloy
Study on Very High Cycle Fatigue Fracture of High Strength Steel with CFB/M Complex Microstructure
Fracture Toughness of a Silica-Doped Cubic Zirconia (8Y-CSZ)
A Proposal for Two Characteristic Ratios of ASTM-CTOD to BS-CTOD
Deformation in Ti-Nb-Ta-Zr-O Alloy at Near Ideal Strength
Effect of Parameters of Notch on Fatigue Life of Shaft Based on Product Lifecycle Management
Predication of Fatigue Life of Notched Torus under Random Scan Vibration
The Structure and its Dependence on the Magnetic Properties of Ni5CoXCu95-X Alloys Produced by Mechanical Alloying and Subsequent Annealing
Thermomechanical Process Innovation via Computer Modeling and Simulation
Failure Analysis of a Hammer Drill Shaft under Complex Loading Paths and Severe Environmental Conditions
Fracture Process of Aluminum/Aluminum Nitride Interfaces during Thermal Cycling
Metallurgical Investigation on Low Ductility Failures of Cu-ETP Components
Grain Boundary Pinning by Particles
On the Effects Associated with Control Parameters Delay during Biaxial Cyclic Loading of Engineering Materials
Tools and Technologies for Hot Forming with Local Adjustment of Part Properties
Simulating Phase Coarsening of Ultra-High Volume Fractions
Method of Constraint Loss Correction for CTOD Fracture Toughness under Welding Residual Stress Field
Evaluation of High Temperature Fatigue Behaviour of P22 by Miniature Specimen Testing
Characterization of Lanthanoid and Aluminum Based Oxide Film for Wide Bandgap Semiconductors
Microstructural and Mechanical Studies in Al-Mg Based Alloys Obtained by Conventional and P/M Processes after Special Thermomechanical Treatments
Friction Stir Welding of Magnesium Alloys under Different Process Parameters
The Effect of Ultrasonic Injection on the Microstructure and Mechanical Properties of A356 Alloy
System for Process Analysis and Hardness Prediction when Quenching Axially-Symmetrical Workpieces of any Shape in Liquid Quenchants