Engineering and Manufacturing Technologies

Preface, Committees and Sponsors
Chapter 1: Materials Science: Technology, Processing and Applied Research
Random Characteristics on Cutting Interpenetrating Network Composites
Aluminum Pigments Encapsulated by MTES and TEOS for Corrosion Inhibition and their Characterizations
The Deformation Behavior of Thermal Compression for ZK30 Magnesium Alloy
A Preliminary Study on the Effect of WEC Cleaner Papermaking Chemical on the Improvement of Paper Physical Strength
Microstructure and Properties of 8YSZ with High Component BAS
Research of Compression and Energy Absorption Characteristics of Polyimide Foam
The Spherical Copper Nanoparticle Grown at Water-Immiscible Interface of Castor Oiled Graphite-Epoxy Solid Electrode Surface
Investigation of the Solubility and Absorption Rate of CO2 in PZ Promoted K2CO3 Aqueous Solution
Study on Effect of the Ternary Composite Retarder on Properties of FGD Gypsum Plaster Material
Effect of Sodium Alginate on the Properties of Composite Protein Films
Preparation and Study on the Performance of Polymer-Modified Cement-Based Composite Insulation Materials
Study on the Corrosion Resistance Behavior of Multi-Elements Alloy CoCrFeNiTi0.5
Preparation and Study on the Waterproof Performance of Polystyrene Lightweight Composite Insulation Materials
Development of Multifunctional Nanomaterials in Phototherapy
Viscosity of Dimethylbenzene in [Bmim][BF4] and [Bmim][PF6] Ionic Liquids
The Influence on the Hardness and Form of U75V from the Different Cooling Rates
Improvement of Polymers by UV Irradiation: The Research in Ageing and Solidification - Take Polysiloxane-Modified-Polyacrylates and Asphalt as an Example
Preparation of Terephthalic Acid (TPA) and Dioctyl Terephthalate (DOTP) by Anthracite's Alkali Oxygen Oxidation
Study on the Preparation and Properties of Desulfurization Gypsum-Based Self-Leveling Material
The Preparation of Red Mud Foam Lightweight Thermal Insulation Material
Autothermal Reforming of Ethanol for Hydrogen Production: Modeling and Simulation
Study on the Vacuum Insulation Panel Protected by Silicone Rubber
Influence of CaF2 on the Formation Kinetics of Belite-Calcium Barium Sulphoaluminate Cement Clinker
Influence of Limestone Powder on the Performance of Cementitious Materials
CO2 Fixation Using MEA and CaCl2 Aqueous Solutions
Synthesis and Performance Evaluation on Amphoteric Surfactant of Dodecyl/Tetradecyl Phosphobetain
Effect of Material Constitution on the Properties of Thermal Insulation Materials
Study on the Formation of C3S Doped with SO3, BaO and MgO
Gas Sensors Fabricated by Aerosol Deposition
Effects of Titanium Oxide Precipitate on Acicular Ferrite Nucleation in Carbon Structural Steel
A Study of Morphology of Titanium Powder Used in Electron Beam Melting
Study on Preparing Coating for the Anti-Erosion Property of Artillery
Mineral Composition and Performance of Phosphoaluminate Clinker with Addition of SO3
Error Analysis of Natural Vibration Characteristic of the Diamond Wire Saw
Research on the Decoating Effect and Microstructure of Surface Damage of High-Pressure Waterjet
Synthesis, Characterization and Property of Nano Rare Earth Terbium Complex with Gatifloxacin
Production of Phenolic Compounds from Low Temperature Catalytic Fast Pyrolysis of Biomass with Activated Carbon
Performance Evaluation of Polymer Microspheres for Profile Control and Oil Displacement
The Influence of Heat Treatment on the Interface and Properties of Mo2FeB2 Cermets-Steel Clad Material
Determination of Tricalcium Silicates Crystal Forms in Belite-Barium Calcium Sulphoaluminate Cement
Study on Sucrose Powder in Selective Laser Sintering Mechanism
The Relationship between the Hydrolysis Degree and Calcium-Binding Capacity of Whey Protein by Enzymatic Hydrolysis
Microscintillator of Ce Doped ?-NaLuF4in Uniform Hexagonal Prism Morphology by a Facile Hydrothermal Method
The Preparation of a New Type of Pectin Capsules Replacing Gelatin Capsuales
Raman Study on the Crystallization Characteristics of Amorphous Ge2Sb2Te5 Film
Strength Prediction of Double-Lap Woven CFRP Bolted Joint Incorporating Material Softening
W-Cu Nano-Composite Powders Prepared by Hydrothermal Method
Study on Effect of Matrix Properties on Fatigue Damage Initiation of Woven Carbon Fabric Vinylester Composites
Studies on the Way of Obtain C2H3+ by C5H8O+Small Fragments Calculation
Blinking in Photoluminescence of InGaN Devices is Caused by Slow Beating of THz Vibrations of the Quantum Well
Taguchi Grey Relational Analysis of Dry Sliding Wear Behaviour of Annealed AA7075-TiC Metal Matrix Composites
Effect of Heat Treatment on Wear Behavior of Hot Extruded AA7075 - 4%TiC In Situ Metal Matrix Composite
Deep Drawing and Bulging Processes of Hard-Deformed Light Alloy Sheet with Resistance Heating
Effect of Water Reducer and Cellulose Ether on Sulphoaluminate Cement-Based Lightweight Thermal Insulation Board
2124 Aluminum Alloy Aging Forming Springback Study Based on a Combination Forecasting Method
The Anti-Bending Performance Study of Loaded Continuous Beam that Strengthened with Prestressed Laterally Bonded Carbon Fiber Sheets
Investigation of Blends of sPS/B30, B30/iPP and sPS/iPP/B30: Mechanical and Thermal Properties
Characterization of Spray Angle and Velocity in Water-Mist Nozzle by Using Response Surface Approximation
Mechanical Analysis for Thin-Walled Stiffened Plates on the Base of Plants Venations Growth Algorithm
Study about the Effects of Cryogenic Treatment on the Mechanical Properties of PCrNi3MoVA Steel
Mechanical Behavior Research of Recycled Concrete Small-Sized Hollow Block Based on Load Test
The Beryllium Bronze for Capacitance Sensitive Accelerometer
Modeling and Control Techniques for Microstructure Development
Composition Characteristics of Reconstructed Steel Slag with Electric Furnace Slag
Stabilization of Multiple Heavy Metal Contaminated Soils Using Biological Materials
Study on the Recovery of Sulfur from a Lead-Zinc Tailings of Fujian
The Research of Biomass Biodegradable Material Microstructure Impact on Performance
Biomass Biodegradable Starch Material Cushioning Packaging Products and Plasticizing Properties of Compatibility
Comparative Study of Squeeze Casting of AA6061 with and without Employing Ultrasonic Cavitations
Multi-Response Optimization of CNC WEDM Process Parameters for Machining Titanium Alloy Ti 6AI-4V Using Response Surface Methodology (RSM)
Process Factor Optimization for Reducing Warpage and Shrinkage in Injection Molding Using Design of Experiments
Performance of Brazed Carbide End Mill Tool for Machining of Ti6Al4V
Experimental Investigations on the Effect of Vegetable Based Cutting Fluid in Turning AISI 1040 Steel
Determination of Isosteric Heat and Entropy of Sorption of Air Dried Sheet Rubber Using Artificial Neural Network Approach
Giant Permittivity of Barium Titanate Prepared by Ultra-Fast Sintering Method
Experimental Study on Superficial Modification of Recycled Aggregate with Fly Ash
Influence of Foaming Agent on Properties of Red Mud Lightweight Baking-Free Brick
Effect of Minimum Quantity Lubrication when Turning a Steel Grade
Microbial Oil Production from Lignocellulosic Biomass - Recent Development and Prospect
An Overview of the Mechanism of Non-Metallic Materials for Energy-Saving and Environment-Protection
Winding Trajectory Generation for Composite Products
Chapter 2: Electronics and Integrated Circuits, Electrical Engineering and Applications
The Design and Test of Durability Test Platform for Small Scale Electromotor
The Design of Active Low Pass Filter
Driveline Simulation of 2013 Formula Student Electric Racing Vehicle
Development of a New Pulse Discriminating System for Micro Electro Discharge Machining (?EDM)
Circuit Design of High Reliability Pulse Driver for Relay Control
Capacity Optimization of Steinmetz Compensation Circuit for Electrification Railway Unbalance Controll
The Application of Phase-Locked Loop Frequency Tracking in the Intelligence-Type Induction Heating Power Supply
The Coupling Effect of Electromagnetic Pulse and Computer
Design and Analysis of UHF RFID Tag Antenna on the Surface of Cylinder
Control of Cascaded H-Bridge STATCOM for Load Compensation
Design of Arbitrary Waveform Generator Based on Direct Digital Synthesis Technique Using Code Composer Studio Platform
Design Sheet Beam Gun for THz Traveling-Wave Tube
A New Hybrid SSD Architecture Based on SLC and MLC
Resonance Frequency Calculation of Long-Neck Cylindrical Acoustic Resonators
Analysis of Novel OLED Based Four-Primary Displays
Identification Parameters with Neural Network for Preisach Hysteresis Model
A Fast Digital 3D-SVPWM Algorithm for Four-Leg Converter
Chapter 3: Mechanics, Tools and Mechanical Engineering: Technology, Design and Applied Research
Stress and Modal Analysis for Rear Axle Housing of Mining Scraper
The Floquet Analysis of Liquid Interface Wave in a Double-Frequency Excited Cylindrical Container
The Body Structural Optimization Based on Safe Side Impact
Simulation Analysis and Optimization Design of Double-Wishbone Independent Suspension
Research and Development of Steel Casting CAD/CAE Integration Technology Based on the Neutral STEP File
The Research of Remanufacturing Technology Applied to Lifting Machinery
Many-to-Many Regression Analysis of Loading Characteristic in Dieless Tube Hydroforming
The Method of Transforming Ordinary Machine Tools to Ultrasonic Vibration Deep Hole Drilling Machine Tools
Fault Diagnosis Method of Mini Excavator Slewing Bearing
The Oil Spill Analysis and Structure Improvement of Marine Sliding Bearing
Optimization Design of Rectangular Cross-Sectional Wire Race Ball Bearing
Numerical Flow Simulation in a Horizontal-to-Vertical Elbow
Experimental and Numerical Investigation of Circular Arc Dovetail Attachments under Fatigue Loading
Strength Safety Coefficient and Fatigue Life Analysis of Coupling Diaphragm Based on FE-Simulation
Research on Racing Loss of a High-Power Hydraulic Retarder
Analysis and Research of the Technology Based on Carbide Tool Passivation
The Study on the Wear Characteristics of Flank Lock Type Precision Locknut in the Dynamic Conditions
The Study on the Variation of Friction Coefficient of Flank Lock Type Precision Locknut at the Different Tightening Speed
High-Cycle Fatigue P-S-N Curve Estimating Method Based on Maximum Likelihood Method for Turbine Coupling Bolt Materials
Statics Analysis on Sail Structure for Ocean-Going Ships
Research on Functional Similarity and Structural Similarity of Mechanical Components
Numerical Investigation on Aero-Thermodynamic Characteristics of Wedge Shaped Nose Cone of Near Space Supersonic Flight
Experimental Investigation of Vibration Characteristics for Vapor Cavitation in Plain Journal Bearing
Research on CAD/CAE System of Gate Valve Based on UG
Effect of Helical Screw Tape Insertion on Heat Transfer and Pressure Drop Characteristics in a Horizontal Concentric Double Tube Heat Exchanger
Experimental Investigations of Single and Multi-Fault in Rotor System
A Brief Review on Fault Diagnosis of Rotating Machineries
The Influence of Front Support on Vibration Behaviors of TBM Cutterhead under Impact Heavy Loads
The Performance of TFC Slider under Second-Order Discontinuous Boundary Conditions
Analysis of Detecting Multi Crack with Location and Size in Simply Supported Shaft Using ANFIS
The Numerical Analysis of the Velocity and Pressure Distribution of the Oil Film in Heavy Hydrostatic Thrust Bearing
Application of Taguchi Design of Experiment Method in Optimization of Izod Impact Testing
Multi-Objective Structure Optimization Design on the Upper Carriage of a Naval Gun
Anti-Slosh Effectiveness of Baffles and Braking Performance of a Partly-Filled Tank Truck
Research of Agricultural Machinery Modeling Method Based on Virtual Reality
An Experimental Investigation on Transpiration Cooling for Supersonic Vehicle Nose Cone Using Porous Material
Dynamic Response Analysis of Motorcycle Fenders
Dynamic Simulation of the Stack-Manipulator to Aluminum-Ingot Based on ADAMS
The Simulation of Stack-Manipulator to Aluminum-Ingot Based on ADAMS
Modeling and Simulation of Wire Electrode Deflection in WEDM
Numerical Simulation of Particle Impact Erosion within Electric Submersible Pump Based on Fluent
The Summary Research on the Noise of High-Speed Traction Elevators
Method of Ginkgo biloba Drying and Drying Machine Design
Modeling, Simulation and Design Optimization of a Series Hydraulic Hybrid Vehicle
Movement Simulation of NC Lathe Machine Based on EON Studio
Research and Control for Inertia of Automobile Steering Test System
Development of Piezo Driven Motion Amplified Stage
Study on Development of a Urea-SCR System of Diesel Engine
Experimental Investigation and Numerical Simulation for High Temperature Air Source Heat Pump with New Mixed-Refrigerant
Simulation Study on the Combined Harvester with Four Tracked Feet Passing through Ditch Based on RecurDyn
Simulation Investigation about Combustion and Emission Characteristics of n-Butanol/Diesel Fuel Mixture on Diesel Engine
The Design and Research of Automatic Charging Parking Space
A Simple Optical Coupling Method for Water-Jet Guided Laser Machining System
Analytical Method for Obtaining Cut Geometry of Helical Toroidal Cutter during Semi-Finish in 5-Axis Milling
Machining Evaluation of High-Speed Milling for Thin-Wall Machining of Al7075-T651
Effect of Changing the Position of Tool Point on the Moving Platform on the Kinematics of a 3RRR Planar Parallel Manipulator
Analyzing the Vibration of Warp Yarns in Lengthwise and Crosswise
Development of Post Processor for Dual-Spindle Turning Center
Synthesis of Planar Four-Bar for Generating Path with Prescribed Arc
The Modified Quadruple-Tanks Process: A Flexible Mathematical Model with an Adjustable Simulink Block
A Modified Distributed Tuned Mass Damper Design Approach
A Study on Conventional versus Independent Suspension System of an Automobile
Simulation of TBM Mucking Process Based on the Ballast Fluidity
Quantitative Mixing Analysis of Laminar Flow in Circle Grid Perforated Plate with 50% Porosity Static Mixer
Finite Element Analysis of a Mud Pump Damming Machine Frame
Design and Kinematics of a Cable-Driven Humanoid Ankle Joint
Symmetrical Pneumatic Muscle Actuated Gripper System with Two Mobile Jaws
Parameters Analysis of Bracing Structure with Friction Energy Dissipation System
Chapter 4: Power and Energy: Engineering and Applications
Study on a Quantitative Risk Assessment Method of Primary Equipments Based on Power Grid Safety Analysis
A Comprehensive Evaluation Method on Dynamic Simulation Accuracy of Power System
Study on the Practical Connection Mode of Microgrid Adapting to Dual Power Supply
Study on the Different Dynamic Models and its Simplified Standards of the PWR Neutron
A Comparative Study on Solar Refrigeration Technology
Modeling and Practice of Wind/PV/Pumped-Storage Hybrid System
Environmental Turbulence Analysis of the Wind Power Industry Chain
Component Characteristics of Coal-Based Jet Fuel and Petroleum-Based Jet Fuel
Present Situation of Exploitation and Utilization of Geothermal Resources in China
Safety Study of Primary Loop System of Civil Marine Nuclear Power Plant
Heat Integration of Solid Oxide Fuel Cell System
Status of Unconventional Oil and Gas Resources and its Environment Risk Factors in China
Reliability Evaluation of Generation and Transmission Systems Considering the Effects of Wind Farm
The Research Progress on Biomass Fuel Reburning
The Combined Solar with a Dual Heat Source Heat Pump Applied in a Greenhouse Heating System - An Operation Optimization of Water Source Heat Pump
Optimization of Pyrolysis Technical Parameters for Cotton Stalk Based on Response Surface Methodology
Potential Analysis of Architectural Application of Solar Energy Resource in Panzhihua
Design of Desalination Reverse Osmosis System Power-Supplied by PV and Wind Energy
Integrated AHP-BPNN Model for Wind Farm Investment Evaluation
Wind Energy Resource Assessment at Tindouf Region, Extreme Southwest of Algeria
A Novel Adaptive Protection Scheme for Microgrid
Study on Combustion and Emission Characteristics of Acidic Oil Biodiesel
The Design and Implementation of PV Inverter for Grid-Connected System Base on SVPWM
Study of Heat Losses from Cylindrical Cavity Receiver of Solar Concentrator
Progressive Study of GIS Based Land Suitability for Wind Farm in the South Wales Area in UK via GIS
Chemical Kinetic Mechanism Reduction Scheme for Diesel Fuel Surrogate
Analysis of Spherical Cavity Receiver of Solar Concentrator for Heat Losses
Drying Modeling and Energy Consumption of Air Dried Sheet (ADS) Rubber by Solar and Biomass Energy
Open Fault Characteristics and Simple Diagnosis Scheme in a Back-to-Back Converter for Wind Power Conversion
A New Backward/Forward Algorithm for Weakly Meshed Distribution Systems with Distributed Generation
Innovative Development of Non-Contact Torque Sensor Applied to Wind Generator
Chapter 5: Robots and Manipulators
Dynamic Modeling Based on Screw Theory and Lagrange's Equations of a 3-DOF Cable-Driven Surgical Instrument
An Optimized Design of Humanoid Robot Distributed Control System
Posture Control of a Reconfigurable Mobile Vehicle with Legged Mode
Optimization of Fuzzy Logic Controller Using PSO for Mobile Robot Navigation in an Unknown Environment
Research on the Fault Diagnosis Method of the Reconfigurable Modular Robot Based on Second-Order Sliding Mode Observer
A New Design of Circular Li-Ion Battery Sorting Equipment Based on High-Speed Robot
Dynamic Obstacle Avoidance Algorithm for the Mobile Robot Based on Depth Image of Kinect Sensor
Bigtoe Sizing Design of Small Biped Robot by Using Gait Generation Method
Design and Kick Analysis of a Soccer Playing Robot
Design and Control of a Cleaning Unit for a Novel Wall-Climbing Robot
Design and Control of a Dexterous Anthropomorphic Five Fingered Robotic Arm
Design of a PD Controller Combined with a MRAS-Based LFFC for a Two - Link Robot Manipulator
Collision Free Control of Variable Length Hyper Redundant Robot Manipulator
Research on Control System of Intelligent Creel Multi-Robot
A Robot Presenting Reproduced Stories among Older Adults in Group Conversation
Architectural System Design of Six Channels Compact Fuzzy Logic Controller for Arm Robot Joints Using FPGA Technology
Design and Control of a Waterproof Robot Arm Applying the Gravity Compensator
Inverse Solution and Optimal Concept Rethink from Human Operation to Industrial Redundant Manipulator
Development of Transfer Robot Using for Small Size Flat Panel Display Manufacturing Process
A Review on Lower-Limb Exoskeleton System for Sit to Stand, Ascending and Descending Staircase Motion
Chapter 6: Control Systems
Guided Rocket Control System Design Based on Discrete-Time Adaptive Sliding Mode
Finite-Time Formation Control for Autonomous Underwater Vehicles Based on Hierarchical Leader-Follower
Study on Control Strategy of the Hydro-Mechanical Variable Transmission
Modeling and Control Research for Fuelcell Supercapacitor Hybrid Powertrain
Bus-Clamping Based Improved Discrete Duty Ratio Control Technology of Direct Torque Control for Induction Motors
Control System Design of Air Compression Double-Bubble Foaming Machine
The Hydraulic System of Intelligent Asphalt Disperser Based on Neural Network Internal Model Control
Bioreactor Substrate Feeding Control Using DO Stat Control Strategy: A Modeling and Computer Simulation Study
Research on Characteristics and Key Design Parameters of a Pilot-Assisted Load Control Valve
Design of a Load Lift PLC Control System
Controlling Chaos by Bounded Self-Controlling Function Using Butterworth Filter Feedback
Application of GPC Algorithm in Level Control System
Tuning of PID Controller for the Integrating Systems
Comparison of Servo Positioning Performance of Pneumatic Cylinders Using Proportional Valve Method and PWM Control Method
Application of Fuzzy Adaptive PID Control for Rotor Side Converter of DFIG Based WPGS
Research of the Servo Motion Control of Wave Maker
A Design of Control Strategy for Chaotic Systems with Time-Delay
Adaptive Fuzzy Controller Design for Dynamic Positioning System
Biomass Boiler Drum Water Level Control System Using Neural Networks
Characteristics Analysis of Proportional Control Valve on Vane Damp
The Research and Application of AGC in Circulating Fluidized Bed Unit
Design and Application of IC Card Paid Water Wells Remote Monitoring System
Chapter 7: Measurement, Testing, Monitoring, Detection: Technologies, Analysis and Methodology
The Optimal Design of the New Tube Inside and Outside Differential Pressure Flow Meter
Two-Phase Flow Field Numerical Simulation in Scrubber for Exhaust Gas Desulfurization
Design and Implementation of Fault Detection Equipment of Certain Type of Microwave Range Finder
Indoor Human Detection and Monitoring System Using PIR Wireless Sensors Array
Modeling and Simulation of Engagement Process of Antiaircraft Missile for Training Simulation
A Secure Wireless Telehealthcare Monitoring System and its Web Application
Study on Star Shot Analysis for Physics Quality Assurance in Radiotherapy
Necessary and Sufficient Condition on Controllability and Reachability of Fractional-Order Linear Switched System
The Additional Side Force on the Force Transducer in the Combinatorial Load Cell
Numerical Simulation Research of Velocity and Temperature Fields in High Temperature Flow of Liquid Lend-Bismuth Eutectic
System Design of Greenhouse Temperature and Humidity Monitoring and Alarming
Monitoring and Management of Source Water Pollution Based on a New Bio-Optoelectronic System in Jinan, China
Aluminium Self-Piercing Rivet's Failure: Testing and Numerical Analyses
The Measurement Method of Echo Highlights in Low Frequency
Three-Dimensional Numerical Simulation of the Mechanism of Armour-Piercing Bullet Attacking on the Target
Temperature Drifts Compensation of Strain-Temperature Method for the Measurement of Continuous Welded Rail Temperature Force
Study on Key Technology for Local Installation of Protection and Monitoring Device at Low Temperature
Analysis the Thermal Field for the Liquid Floated Gyroscope and it's Simulation
Aircraft Free Flight Simulation in a Wind Tunnel
Comparison of FLAASH and 6S Code Atmospheric Correction on Snow Cover Detection in Akita Prefecture, Japan Using MODIS Imagery Data
Monitoring Bicycle Riding Motion with Multiple Inertial Sensors
Experimental Study of Suppressing Vertical PS Fires Using Water Spray
A New Method for Evaluating the Profile of Large Paraboloidal Antennas
An Introductory Review of Mechanical Reliability Testing
Face Milling Tool Wear Condition Monitoring Based on Wavelet Transform and Shannon Entropy
Stability of Online Monitoring Stress for Shipbuilding Portal Crane
Detection and Tracking of Vehicle Target Based on Super-Resolution Reconstruction and Variable Template Matching
Performance Study of Solar Trough Tracking Control System
Three Modeling Methods Application in Near-Infrared Spectra Analysis for Determination of Volatile in Lignite Coal Samples
A Gas Pipeline Leakage Diagnosis of Fusing BP Neural Network Basing on WSN and D-S Theory
Study on the Parts Surface Defect Detection Method Based on Modifed SVM Algorithm
Joint Transmit Antenna Selection and Artificial Noise for Security in MIMO Wiretap Channels
An Agent-Based Load Balancing Approach for RFID MiddleWares
UHF RFID Localization Based on Phase Map
Multi-Hierarchical Functional Directed Graph Modeling Method for Aircraft System Fault Diagnosis
Mixed Integer Linear Programming for UAV Trajectory Planning Problem
Coupled CFD/GNC Modeling for the Basic Finner Projectile with Closed Loop
Feature Extraction for Bearing Prognostics Based on Continuous Hidden Markov Model
Position Estimation in Singly-Fed Electrostatic Actuation Systems by Superposing Sensing Signals
The Supporting Scheme Selection of Deep Foundation Pit Based on Fuzzy Optimization Theory
Implementation of the Dynamic Tension Load of Cell Membrane and its Stress Analysis
Chapter 8: Manufacturing and Industrial Engineering: Management Applications
Modeling and Analysis of the Manufacturers Inventory in Closed-Loop Supply Chain
Research on Reliability Analysis Method of Industrial Control System Based on Markov Process
Robust Design - A Case Study in a Research and Development Company
Research of Prediction Model of Operating Condition of Loom
Research on the Application of EPC Encoding Technology for Plastic Windows Manufacturing
Manufacturing Technology Impact on Environmental Factors and Manufacturing Performance
Using the Modified Regression Analysis to Estimate Industrial Competitiveness - The Case of Banks in Tanzania
Enhancing Ceramic Product Value through Appropriate Production Techniques
Design of Flexiable Manufacturing System Based on Practical Application of Engineering Training
The Electric Vehicle Development: Experiences Aboard and Enlightenment to China
Modeling and Analysis of the Bullwhip Effect in Remanufacturing Closed-Loop Supply Chain