Mechanical and Electronics Engineering III

Preface and Organizing Committees
Chapter 1: Material Engineering
Investigation on the Electric-Field-Induced Metal-Insulator Transition in VoX-Based Devices
Application of PLC in Material Automatic Sorting System
Research on Elasticity Characteristic of Equivalent Bio-Material
Experimental Study on Continuous Preparation of Ultrafine Silicon Nitride Powders in Transport Bed
Influence on Electric Field Distribution of GIS Basin Insulator for Insulated Material Epoxy Resin with Different Mean Molecular Weights
Luminescent Property of Al2O3:Ce3+ Thin Films
The High Frequency Pulse Effect and Verification in the Welding Process for High-Strength Aluminum Alloy
The Combined Effects of the Environment and Sliding on the Pd-Ni Plated Connector Materials
Chapter 2: Acoustics and Noise Control
An Improved High-Accuracy CORDIC Algorithm for DSC in Endoscopic Ultrasonography System
A Study on the Acoustic Characteristics of the Counter-Phase Muffler
Robust Adaptive Beamforming Imaging Approach for Stepped-Frequency through-the-Wall Radar
Study on Multi-Crystalline Silicon Textured by Ultrasound
The Acoustic Emission Diagnose and Analysis of Journal Bearing's Inner Ring Looseness Fault by Truck Wheel
Analysis of the Automobile's External Aerodynamic Noise Field Characteristics Based on CAA
Design and Experimental Model Test Research for Three Dimensional Heterotypic Interception Structure
Confirmation Research on Robustness Speaker Based-on Normalized Autocorrelation Voice Selection
OCDs Reliability Screening Using Normalization Variance of Noise Spectrum
Acoustic Sensitivity Analysis Using the Distributed Source Energy Boundary Point Method
Fast Multipole Boundary Element Method for 3-Dimension Acoustic Radiation Problem
Chapter 3: Aerodynamics
Effects of Atmospheric Turbulence on High Resolution SAR Performance
The Effect of Platform Swinging by Stratosphere Wind on a HAPS-CDMA System
Influence of Variable Swirl Intake Manifolds for DI Diesel Engine on in-Cylinder Air Motion
Aerodynamics Analysis in a Human Vocal Folds Model
Videogrammetric Measurement for Model Displacement in Wind Tunnel Test
The Application of I2C Bus Digital Sensor in Airflow Measurements
Optimal Maintenance Interval for Wind Turbine Gearbox
Research on Stator Winding Inter Turn Short-Circuit Faults of Aeronautical Fault-Tolerant Machine Based on Maxwell 2D
Finite Element Analysis for MW Wind Turbine Tower
Chapter 4: Applied Mechanics
Calculation on the Internal Force of Deeply Buried Anti-Slide Pile by Using Finite Difference Method Based on the m-k Type Method
Application of Su-Field Analysis Method to the Innovation of Decision-Making
Stress-Strain Analysis of Back-up Roll with Roll-Sleeve
Development of Test Bench for Coordinate Control between ABS and Regenerative Braking
The Research of High-Precision Interpolation for Complex Trajectory of SCARA Robot Based on NURBS
Application of Synchronous Rectifiers in Power Supply for Unmanned Aerial Vehicle
Chapter 5: Automation, Mechatronics and Robotics
Automatic Monitoring System for Coal Mine Safety Based on nRF24E1
An Open Communication Architecture for Multi-Robots in Complex Environment
An Improved Method for Visual Word Generation Based on Kernel Function
Design of ROV Training Simulator
The Design and Simulation of Predictive Control Algorithm Achieved by the DCS Algorithm Module Combination
The Research of Humanization Design for Coal Mine Machine
A Novel Dictionaries Preconditioning Algorithm for Compressive Sensing
Minimality and Closeure of Random Exponential Systems
Analysis and Finite Element Method Simulation of Rear Sub-Frame Hydroforming Process
Modeling Method for Complex Structure System in Finite Element Simulating Analysis
Design and Implementation of Short Messages Analysis System Based on Multidimensional Data Modeling
A Model of Tactic Threat Assessment in PAAIS
The Automatism Capture the Account Parameter in Engineering Figure Using Computer
Relationship between the Least Mesh Numbers of Models and Distance of Viewpoint in Efficient Real-Time Rendering
Designing and Kinematics Analysis on Running Mechanism of Biped Robot for Water-Running
Delay-Dependent Non-Fragile Robust H? Control for Switched Systems with Multiple Time Delays
Robot-Assisted Upper-Limb Fuzzy Adaptive Passive Movement Training and Clinical Experiment
Research on Mobile Robot SLAM in Dynamic Environment
Detecting Centroid for a Quadruped Robot with Hand-Fused Foot Based on ARM
Research on the Cross-Octant Strategy for Spatial Curve Interpolation Based on Open-Architecture CNC System
High Accuracy Analysis of SCARA Industrial Robot Based on Screw Theory
Servo Motor Control Lifter Systems by Digital PID Control Method
Valve Control System of Oil Depot Based on AnyCAN5000
Adaptive Iterative Learning Control for Robot Manipulators with Initial Resetting Errors
Chapter 6: Automotive Engineering
Robust Optimization Design on Vehicle Divided Steering Linkage
Present Condition and Outlook about SVG
Application of CAN Bus in Automobile Power Window Control System
The Research of Commonly Used Technologies and Application Fields on Data Mining
Research on the Model of Instantaneous DUO and Simulation
(t,k,n) Multi-Blind Proxy Signature Scheme on Elliptic Curve
Driver Maneuvers Reconstruction Based on Vehicle Traveling Data Recorder
Comparation between GA and PSO Controller Optimization for PMSM Driving
Design and Application of Var Compensation Method for Traction Power Supply Systems of Electrified Railway
Fuzzy Control Strategy and Simulation for Dual Electric Tracked Vehicle Motion Control
Research of Automobile Quality Fault Diagnosis Method Based on CBR
A Mobility Pattern Aware Clustering Mechanism for Mobile Vehicular Networks
Study on Single Shaft Balance of Single-Cylinder Engine Based on Coupling of Optimization and Virtual Simulation
Research on State-Space Mapping Algorithm from the Vehicle Unsteady Constraint Test System to the Independent Vehicle System
Energy Regenerative Braking Feedback Lockup Electromechanical Integrated Brake System for Vehicles

L
2-Norm Optimal Trajectory Planning for Mobile Ground Vehicles in a Dynamically Changing Environment with both "Hard" and "Soft" Obstacles
Design of Electromagnetic Smart Car System
Configuration Design of Modular 3-PRS Parallel Robot and Dynamic Simulation Analysis
Research on Designing on-Line Testing System of Automobile Engine Box
Control of Clutch on DCT during Start Process
Research on the Changing Regularity of Ionic Current and Cylinder Pressure when the Gasoline Engine Knocks
The Modal Analysis for the Separate Frame Construction of a SUV
Chapter 7: Ballistics
Unscented Particle Filter Algorithm for Ballistic Target Tracking
Sensitivity Analysis of Ballistics Performance with Respect to Statistical Design Parameters
Research on the Location of Fire Station Based on GIS and GA
A Method of Image Texture Feature Analysis Base on Wavelet Decomposition and its Application
Chapter 8: Biomechanics
Dynamical Behaviors for a Predator-Prey System with State-Dependent Impulsive Effects
Numerical Simulation of Gas Flow in a 48 t/h Biomass Fired Grate Boiler with Inner Dust Removal Device
Research on TG-DTG Analysis and Combustion Kinetics Characteristic of Biomass Fly Ash and Ash
The Drying Characteristic of Biomass with High Moisture Content
Verification of Model Reliability in a Double-Grate Biomass Boiler
The Preparation and Characterization of Organic-Inorganic Hybrid Material Amino Monolithic Column for Capillary Electro Chromatography
Chapter 9: Biomedical Engineering
Characteristics of Anaerobic Co-Digestion of Corn Straw and Cabbage for Biogas Production
Comparison of Three Types of NH3-SCR Catalysts
Overview of Chemical Characterization of Biomass Fast Pyrolysis Oils
Adapted Genetic Algorithm and 5 Levels Control Combined Low-Speed Improvement Direct Torque Control
Design of Bioreactor Control System for Ligament Tissue Engineering
Implementation of Rail-to-Rail Operational Amplifier for Biomedical Applications
A Design of the Device for Lower Limbs Rehabilitation and Simulation Analysis
Design of Diseases and Pests Therapeutic Instrument of Solar in Greenhouse
Synthesis and Performance of Molecular Imprinted Polymers as Drug Release Controller
Study on Compound Cross-Flow Liquid-Liquid Extraction for Separating Methylal-Methanol Azeotropic System
Chapter 10: CAD/CAM/CIM
Modeling and Simulating on Star Map Genetation for All-Sky
An Improved LMS_Newton Algorithm and its Analysis
Application of Robust Extracting Outliers Algorithm in Fermentation Process Data Preprocessing
A New Self-Organizing Migrating Algorithm Based on Dynamic Hybrid Migrating
Exponential Sampling: A Gibbs Phenomena Removal Model for Finite Rate of Innovation Sampling Framework
Mathematical Modeling: A Brilliant Future of Electric Vehicles
Analysis of Manufacturing Systems with Parallel Unreliable Machines and Finite Buffer Based on Matrix-Analytic Method
The Semantic Retrieval Model of Manufacturing Resource Based on Rules and Similarity
Efficient Minkowski Sum Computation of General Ployhedra
Integrated Environment for PDM, RE and CAD/ CAM System
The Design of Improved Normalization Algorithm for Drop Analysis
The Modeling of Thread-Rolling Die-Plates Based on the "Design Table" Functions in CAD/CAE/CAM
Computer Aided Automotive Interior Design for Kansei Engineering
Research on Technologies of Process Integrated Control for Multidisciplinary Collaborative Design
Chapter 11: Machinery and Machine Design
Computer Animation of Dismantling and Assembling for a Gear Oil Pump
The Simulation of the Planting Movement for the Dibble-Type Transplanter
A New Method to Reduce the Interconnection Transients of Induction Generators
Analysis and Design of a Novel High-Power W-Band Spatial Multilayer Doubler
Engine Indication System Simulation of General Aviation Aircraft Based on GL Studio
DMC Based MPC Control of Refrigeration System
Texture Segmentation Using Active Contours Driven by Local Steerable Features
Exact Analysis of a Two Stage Production Line with Parallel Unreliable Machines
A Generic Model for Spiral Groove Grinding
Online Calculating Models of Temperature and Thermal Stresses for Turbine Rotors
A New Feedback Gain Designing of Speed Adaptive Full Order Observer for High Speed Operation of Induction Motor
Dynamics Analysis of Double-Tamper Mechanism for Asphalt Paver
Multi-Fractal Based Fault Diagnosis Method of Rotating Machinery
Dynamic Model of Compression Refrigeration System with a High Pressure Receiver
Load Rotational Moment and Power of Centrifuges with Rotational Arms
Modeling and Simulation of NC Precision Sphere Grinding Machine Feed Drive System
Research on a Novel 3-DOF Planar Parallel Manipulator Driven by Three-Slider and its Larger Workspace Analysis
Study of the Squeeze Film Damper of Larger Flow Rate High-Speed On/Off Valve
The Design to Impeller of Desulfurization Agent Powder CaCO3 Grader and Establishing for its Math Model
Simulation and Analysis of Special Motor of the Hydraulic Motor-Vane Pump Based on Ansoft
Dynamic Model of Gears with Trapped Oil and Coupled Analysis in External Spur-Gear Pump
Characterization of Global Form Deviations for Spiral Bevel Gear and Correction of Machine-Setting Parameters
The Experimental Research of a Piezoelectric Linear Motor
Modeling and Experimental Study on Grid-Connected Inverter for Direct Drive Wind Turbine
The Application of Hydraulic System in Wind Turbine
A New Application Research of Time-Base Following Control in Non-Circular Contour Turning Lathe
Experimental Study of the Counter Dual-Swirl Air Blast Atomizer
Heavy Driving Drum Parametric Modeling Analysis System Development
The Dynamic Fault Tree Analysis of Not-Cutting Failure for MG550/1220 Electrical Haulage Shearer
Research on Support Distribution of the Handling Equipment for 500-Meter Long Rail
Dynamic Analysis and Simulation of Sliding Vane Compressor
Parameter Analysis and Optimal Design for Mobile Claw-Pole Alternator
Modeling and Development of Gap Adjustment Automatically Technology for Offset Machine
Excavator Operator Mechanism and Hydraulic Integration Model Construction and Simulation Based on Modelica
The Optimization Design of Mechanical Structure Based on CAE Technology
Acoustic Simulation for the Gearing Engagement System
Reliability Design of Agricultural Products
Straightness Apparatus in the Automatic Control Design Deep Hole
Research on Double Helical Lines Milling Process of Carrying Bag Cleaning Machine
Stress and Strain Analysis of First Stage Rotating Blades of Flue Gas Turbine Blades
The Structure and Two-Phase Flow Analysis for a New SVLX Static Mixer
Research on Spiral Bevel Gear Tooth Surface Reconstruction Based on NURBS
Research on Computer-Aided Design of Axial Turbine Blades with Ultra-Low Specific Speed
Performance Predication and Axial Force Study on Deep-Well Centrifugal Pump
Application of Single Neuron PID in the Control of Loader Working Device
Research of Optimization Design of Structural Concept about Portal Frame
Chapter 12: Computational Mechanics
A Multi-Objective Memetic Algorithm Based on Chaos Optimization
A Comparison of Accuracy Based on Data Imputation between Unconstrained Structural Equation Modeling and Weighted Least Squares Regression
Design of Heat Metering System Based on MCS-51
Design of Can Bus Clock Synchronous System Based on STM32
Design of Optical Access Network Implementing DVB Business and IP Business
Research and Design of Color Restoration Algorithm for Demosaicing Bayer Pattern Images
A Novel Method of Impedance Measurement Used in Islanding Detection Based on Controllable Short-Circuit Technology
A New Method of Orthogonal Grid Generation
Nonlinear Dynamics of a Slender Flexible Cylinder in Axial Flow
3-D Finite Element Simulation of Impact Damage of Laminated Plates Using Solid-Shell Interface Elements
Chapter 13: Internal Combustion Engines
Energy Analysis of Gas Engine Driven Heat Pump
Modeling and Simulation of Stick-Slip Motion for Pneumatic Cylinder Based on Meter-In Circuit
Numerical Simulation of Valve Timing and Size on a Compressed Air Engine Performance
Combustion and Emission Characteristics of CNG Engine at Idle Conditons
Simulation on Effect of EGR on Oxy-Fuel IC Engine
Two-Stroke Engine with Fuel Semi-Direct Injection Using FAI System
The Study of Optimization Design of Engine Exhaust Manifold Based on Finite Element Analysis
Hybrid Fuzzy PID Control for Synchrodrive System of Dual Linear Motors
Separation Study on Spectral Wear Signal for Engine
Adaptive Prediction of Transient Air Fuel Ratio Based on Forgetting Factor Algorithm for a Coal-Bed Gas Engine
Chapter 14: Marine System Design
An Investigation into the Impact of Fishery on Buried Depth of Subsea Pipeline
Inter-Modal Couplings between Two Sea Subsystems with an Arbitrary Interface
Chapter 15: Material Science and Processing
Adsorptive Removal of Methylene Blue by Ginkgo Leaf Powder
Pulping Utilization of Spartina alterni?ora (Common Cordgrass) Based on Fiber Characteristics
Ash Characteristics Analysis during Co-Combustion of Biomass and Coal
Polaron to Bipolaron Transition in Conjugated Polymers
Study on the Inclusion Interactions of ?-Cyclodextrin with Oleic Acid by Competitive Inclusion Method
Experimental Study on Preparation and Pb2+ Adsorption Capability of Ferric Salt Modified Sands
Preparation of Sands Modified by Aluminous Salt and its Adsorption Capability of CD2+
Theoretical Investigation of ZnSe Epitaxy Growth on GaAs(001) Substrate
The Design of Optical Fiber Fault Locator Based on FPGA
Numerical Simulation of Particle Mixing Feature for a Gas-Liquid-Solid Three Phase Flow in an Impeller-Driven Stirred Vessel
The Transient Temperature and Thermal Stresses on Metal Material Irradiated by Multi-Pulse Short Power
Polymer-Liquid Crystal Composites and Applications
Effect of Ta2O5 Addition on the Electrical and Physical Properties of Lead-Free 0.98(Na0.5K0.5)NbO3-0.02(Na0.5Bi0.5)TiO3 Piezoelectric Ceramics
Reliability Analysis of the Diamond Saw Blades Based on ANSYS
Tribological Properties of the Overbased Calcium Sulfonate Complex Greases
Effect of Substrate Temperature on the Preparation of Cu2ZnSnSe4 Thin Films
Numerical Simulation of Hydroxyapatite Particle Impacting on Ti Substrate in Cold Spraying
Study Analysis on Purification of Alumina Electrolytic Flue Gas by Bag Filter
Preparation and Characteristics of Multilayer Magnesium Diboride Superconducting Films via CVD Method
Contact Stresses Analysis between Glass Panel and Upright Fitting Roller Gabled with Different Hyperelastic Materials
Optimal Design of Disc Cutter Structure Parameter Based on Genetic Algorithm
A Method of Machining Micro Hole and Micro Cavity in Ceramics
Influence of Material Microstructure on Micro EDM
Temperature Field Analysis on Cooling Stave Material and Stave Body
The Optimal Design of Reinforcement Rib Based on the Orthogonal Test and Finite Element Analysis
Study on Hot Compression of Ti3Al Alloy Based on DEFORM-3D
Strengthening Mechanisms of Vanadium Micro-Alloyed Reinforcing Steel Bar
Effect of Hardness of Needle-Sealing Surface of Pintle Nozzle on Cavitation Erosion
Study of Reactive Plasma Sprayed TiN Electrocatalytic Carrier Coatings
Dynamic Analysis of the Diamond Saw Blade Cutting Granite Based on LS-DYNA
Isothermal Extrusion Study and Simulation of Magnesium Alloy for Hilt of Electric Screwdriver
Research on Water-Lubricated Bearing Applied in Propulsion Improvement of Certain Type of Motorboat
Study on Gyroscopic Effect of Magnetic Flywheel Rotor
Study on Numerical Simulation Technology Based on ANSYS of Fracture Behavior in Metal Forming Process
Preparation of Silicon Nan Spheres by Using Electrical Discharge Machining Method
The Forecast for the Abrasive Wear of Metal Materials Aginst Plant Abrasive Based on the Grey Markov Model
Preparation of Magnetic Chitosan/Iron (II, III) Oxide Microspheres and Application in Adsorption of Cr (VI)
Preparation and Characterization of Nanocomposite Ni-Al2O3 Thin Films by Ultrasonic-Electrodeposition Technology
Prediction of Nano TiN Particles Content in the Ni-TiN Composite Coating Based on AR Model
Prediction Model of the Charpy Impact Toughness of Deposited Metals of Welding Materials
Research on Non-Linear Decoupling for Multi-Dimensional Force Sensor
Study of Transmittance of CdS Thin Films Prepared by Spray Pyrolysis
Advances in Research on Left-Handed Met Materials
Eutectic Growth Mode of Al-Si Alloy Solidified under High Pressure
Additives Applied for Preparation of Superfine Mg(OH)2 Particles by Light-Burned MgO at Low Temperature
Wrinkle Formation and Imprinting of Gold Film Deposited on Polydimethylsiloxane
A Density Functional Study of Ho-Doped Sin (n=1-12, 16, and 18) Clusters
Preparation and Research of AuNi Cathode Catalyst for Direct Methanol Fuel Cell
Preparation of High Compression Strength Silicon Hybrid Material at Low Temperature through Sol-Gel
Effect of Pore Size on the Hydrophilicity in Dark of TiO2 Films
Chapter 16: Mechanical Design
Fire Fighting of Wind Extinguisher with CO2 Gas Assisted
Characterization of Novel Perovskite-Type La0.6Sr0.2Ca0.2Co1-YFeYO3-? Cathode Materials Prepared by Solid State Reaction for IT-SOFCs
Fatigue Property of Welded Joints of Ti6Al4V Titanium Alloy in Corrosion Environment
Oxidation Chlorination of Thiophene in Coking Benzene
Research on Hysteretic Phenomenon of Metal Rubber
Comprehensive Sewage-Treating Technology Using Bio-Tank of Glass Fiber Reinforced Plastics on Intensive Scaled Swine Farm
Two-Dimensional Irregular Packing Algorithm for Strips Cutting Technology in Sheet Steel Industry
Two Novel Adams Model Encapsulation Methods in HLA Based Collaborative Product Development
Diagnosis and Prediction for Equipment Efficiency Based on OEE in FCC M6 Welding Workshop
The Study of the Disabled Traffic Products Based on Product Safety
Dynamic Elasto-Plastic Analysis on the Steel Spatial Arch Truss with 30m Span and 0.2 Rise-Span Ratio
Dynamics Simulation of Beam-Carried Cranes Based on Virtual Prototyping
The Study of Signal Characteristics of Critical Sensors on a Coal-Bed Gas Engine
3D Rebuilding for Impeller of Centrifugal Pump Based on ICT
Critical Rotation Speed Calculation and Application Development of Multi-Stage Centrifugal Pumps for Mining
Chapter 17: Mechanical Power Engineering
Research of Project Investment Control Based on Life Cycle Theory
Effects of Fillet on Kinematic Characteristic of Internal Gear Couple
The Research about the Inverse Kinematic of the Tricept Mechanism Based on Pro/Engineer
A Study of Bag-Breaking Device Based on Whitworth Mechanism
Research on the Characteristics of PMSM Vector Control System Based on Speed Sliding Mode Controller
Modelling and Simulation of Particle Breakage in Jaw Crushers
Modal and Transient Response Analysis for Complex Gear-Bearing System
Comprehensive Analysis of Wheel Drive Motor Torque Characteristics
The Inner Hole Precision Detection of Precision Machining Zirconia Ceramics Spindle
Research on Periodic Motion Stability of Gear Dynamics with Friction
Chapter 18: Mechatronics
A Novel Method of PAPR Reducing for OFDM Systems
Mechanism of Improving Mechanical and Electrical Properties of Fe40NiCrSiAl Alloy Induced by Laser Shock Wave
Study on Dual-Loop Controller of Helicopter Based on the Robust H-Infinite Loop Shaping Method
Simulation Modeling of Dynamic and Flexible Scheduling about Large-Sized Components Producing Workshop Based on Cellular Automata
Chapter 19: MEMS and Nano Technology
Study on the Effect of ZnO Buffer Layer Thickness on the Properties of MgZnO Film
A New Real-Time Position and Orientation Tracking System for Endoscopy
Realization of Two-Axis Macro-Micro Dual-Driven System
Research on High-Precision Automatic Inner Diameter Measuring System for Coaxial Transmission Line Outer Conductor
Energy Saving Design of Personal and Consumer Electronics Products
Analysis and Calculation of the Allowed Values of Contact Pressure in the Process of Circuit Breaker Closing Work
Isolation Performance Evaluation of Compressor Vibration Isolating Systems Based on LMS Test. Lab Signature
The Selection Model of Equipment Resource Based on AHP and Grey Correlation Analysis
Chapter 20: Multibody Dynamics
Contact Stress Analysis of Multilayered Strands
Dynamic Response Analysis of Cantilever Beam under Moving Mass by Time-Discontinuous Galerkin Finite Element Method
Chapter 21: Nanomaterial Engineering
Research on Initial Allocation and Fairness of Carbon Trading
Analysis of Dispersion Characteristic of Microstrip Lines on Ferrite and Silicon Structures with Spectral-Domain Method
Preparation of Submicron Electrode for Electrochemical Micromachining by Multi-Step Electrochemical Etching
Study on the Preparation of Dy-Doped TiO2 Nanotube Arrays and its Visible Light Responsive Photocatalytic Properties
Nanometer Titanium Dioxide Powder Preparation and its Performance
Experimental Research on Buckling of Nano-Thin Film under Impact Load
Preparation of AlNPs/CMCN Composite Nanofibers by Electrospinning
One-Step Synthesis of Fe3S4 Micro-Crystals and its Facile Transformation to Fe7S8 Micro-Crystals
Influence of MoS2 on the Microstructures and Properties of Ni-Based Alloying Coating
Electrochemical Properties of Highly Ordered TiO2 Nanotube Arrays as an Anode Material for Lithium-Ion Batteries
Chapter 22: New and Renewable Energy
Analysis on Efficiency of Power Generation for Various Sun Tracking and Fixed Solar Cells under Different Sunshine Environment
Wind Energy Resource Assessment for Wind Farm
Study on the Design Process Based on Green Design
The Effect of the Ratio of H/W on the Performance of the Hybrid Wall Powered by Solar Energy
Comparative Analysis of Heat Transfer Characteristics for CO2 and Conventional Refrigerants
On the Corrosion Behavior of Refined Bio-Oil during Rubbing Process
Energy Factor Analysis in Modular Product
Study on Parametric Design of ITER Cryostat Based on CATIA
Chapter 23: Noise and Vibration
The Adaptive Filtering Algorithms for Engine's Noise Cancellation in Speech Signals
Nonlinear Spectral Subtraction Method for Elimination of Aircraft Engine's Noise from Degraded Speech Signals
Quantitative Analysis of Noise Impact on Duffing Chaotic Detection System Using Lyapunov Characteristic Exponents
Research on an Improved Control Strategy for Harmonics Restraint of DFIG System
Study on the Mechanism of Ultrasonic Vibration Aided Electrical Discharge Milling in Deionized Water
The Dynamic Analysis and Optimization Technique of Non-Stationary Random Vibration
Study on the Influence of the Quantity of Grooves on Performance of New Balance Drum
Chapter 24: Electromagnetics
The Design of Electromagnetic Flowmeter in Partially Filled Pipes
Speed Estimation Method for Sensor Less Control of AC Motor Drives Based on Stator Field Orientation
Electromagnetic Analysis of Frequency Selective Surfaces Using the SSED Method
A Method of Stabilizing Semiconductor Laser Power
Design of A 3-10 GHz Low Phase Noise YIG-Tuned Oscillator
Study of Structure and Optical Properties of Magnetron Sputtered ZnS Thin Films by Annealing
Damage Efficiency Research of PCB Components under Strong Electromagnetic Pulse
Effects of Aperture Amount and Offset on Couplings of Strong Electromagnetic Pulse
Error Compensation of 3-Axis Magnetoresistive Magnetometer
Electromagnetic Properties of Ca-Substituted Magnetic-Dielectric Composites
Optimum Design of a Magnetic Circuit in a Magneto-Rheological Damper
Feedback Linearization for Sliding Mode Control of CNC Electromagnetic Levitation System
Anti-Scaling Effect Comparison of High-Frequency Electromagnetic Pulses Stimulation in Different Processing Chambers
Study on Electric Field Characteristics of Converter Transformer on Valve Side Winding
Study on SASS with Magneto-Rheological Fluid Damper Based on Improved Variable Universe Fuzzy Control
The Electromagnetic Compatibility Design of Restrained Image Transmission Equipments
Study of a New Electromagnetic Weft Insertion Mechanism Based on the PLC
Electronic Structure and Magnetic Properties of Ga-Doped Heusler Alloy Co2FeSi
Ferromagnetism and Electronic Structure in Nitrogen-Doped ZnO Nanowire: First-Principle Calculation
The Electronic and Magnetic Properties of Chemically Decorated Boron Nitride Sheet
Chapter 25: Composite and Smart Materials
Adsorption Properties of Phospho-Polypeptide on Synthetic Hydroxyapatite Biomaterials
Synthesis and Humidity Controlling Behaviors of Sepiolite/Poly (Sodium Acrylate-Acrylamide) Composite
Preparation of Tetragonal and Hexagonal Calcium Zincate
The Evolution of Free Electron Density during the Interaction between Femtosecond Pulse and Lithium Niobate Crystal
Design and Properties of Multifunctional Lubricant
Study on the Friction and Wear Behaviors of Cu/PTFE Self-Lubricating Composites
The Pulverization and its Dynamic Model of Waste Thermosetting Phenol-Formaldehyde Resins
Design and Analysis of Ultra-Low Speed Movement Equipment System
Study of Cutting Composite Materials with Low Pressure Abrasive-Water Jet
Liquid Flow Characteristics in Microchannels
Research on the Properties of NiZnO Thin Films
Effect of Supports on Stress Distributions in the Adhesive Joints
Dew Points of C4F8/N2 Gas Mixtures
RDX-Based Energetic Material Cook-Off Characters in Different Clearances
PVA/PVAm Hydrogel Membranes for Removal of Metal Ions from Aqueous Solution
Effect of Modified-Silicon Rubber on Thermal Degradation and Anti-Droplet Properties of Polyamide 6/Melamine Cyanurate Flame Retardant Composites
Sintering, Microstructure and Dielectric Properties of Ca-Al-B-Si-O Glass/Al2O3 Composites with Various SiO2 Content
New Liquid Crystalline Material with an Azo Group in the Molecular Core
The Toughening Mechanism of Polyamide 6/EPDM-M/Nano-CaCO3 Ternary Composites with Sandbag Microstructure
Gelator In Situ Modify PMMA
The Structures and High Temperature Properties of FeMnCrNiAl/Cr3C2 Composite Coatings by High Velocity Arc Spraying
Preparation of TiO2/CNTs Nanocomposite and its Photocatalytic Activity for Methyl Orange in Aqueous Solutions
Chapter 26: Dynamics and Vibration
On the Dynamical Behavior of Three Species System with Time Delays
Research to Blasting Vibration Distribution of an Open Pit Mine Based on Wavelet Packet Theory
The High Resolution Three Lateral Logging Response Research Based on MATLA
Study of Large Scale Measurement Method Based on Leapfrog Principle
A New Spacecraft Attitude Controller Considering Variable Saturation Limit of Flywheels Output Torque
Simulation and Experimental Study on the Impact of Breadth of Back Blade on Axial Force Balance
Chapter 27: Energy Engineering and Management
The Design Practice and Implementation of a Flyback Converter
Discussion of Energy Consumption Analysis Method on Energy System
Approach to Energy Optimization Axiomatic Design Based on Design Unite
A Decision-Making Model of Energy-Saving Design and a Case Study
The Application of Functional Safety Standards on the Safety Management of a Chemical Process Tank
Groundwater Numerical Simulation in Cool Water Well Coal Mine
Power Quality Disturbance Research of Grid-Connected Wind Generation Based on Fractional Fourier Transform with Wavelet Entropy
Economic Analysis of Solar Energy/Air Compound Source Heat Pump System
Analysis of Energy Efficiency of Solar Energy/Air Source Compound Heat Pump System under Heating Condition
Chapter 28: Engineering Materials
Application of Magnetic Material in Magneto Suction Cupule of Crane
Bearing Performance Analysis Based on ANSYS of Continuous Deep Beams with Opening
Experimental Research on Concrete Confined by Width and Spacing of Straps of GFRP Sheets
Modality Analysis Based on FEM of RC Deep Beams with Opening
Numerical Analysis of Shear Lag Effect for Concrete Huge Section Box Grider
Experimental Research on Superlong Deep-Hole Drilling Processing Technology for Beryllium Bronze
Chapter 29: Fluid Dynamics
Application Comparison about Sediment Deposition in Outer Channel by Three-Layer Mode and Analog Analysis Mode
Numerical Study of XCP Probe's Fluid Dynamic Characteristics
The Heat Exchange and Stress Distributing of Expansive Soil in Site
Effect of Oil and HPAM in Polymer Flooding Wastewater on the Desalination Process by Electrodialysis
Paper Based Microfluidic Device Using Surface Acoustic Wave as Driving Source
Colon-Targeted Drug Delivery Microparticles Prepared Using Electrohydrodynamic Atomization
Upwinding Meshfree Point Collocation Method for Unsteady Magnetohydrodynamic Flow at High Hartmann Numbers
Mesurment Instrument of Quantitative Fluorometry Intensity Based on Stoke's Shift
Numerical Analysis of Spraying Hole Improving Permeability and its Application in Outbursting Coal Seam
Compound-Fault Diagnosis of Bearing Based on Order Tracking Wavelet Packet and Rough Sets
3D Numerical Simulation of Fluid Flow and Heat Transfer for Asymmetric Spiral-Gear Inserts in a Tube
The Impact of Balance Hole Radial Position of Centrifugal Pump on Axial Force and External Characteristics
Key Technologies Related to High Vacuum Dry Pump
A New Design for Liquid Mixing System
Numerical Simulation on Flow Structure of a Steam-Jet Pump Influenced by Primary Nozzle Geometries
Recycling Experimental Research of Thermosetting Phenolic Plastic Waste Based on Mechanical Effects
Experimental Study of Mechanical Properties of Fiber of Deep-Sea Mooring Cables
Fraction of Multiphase Flow Measurement System Design and Application
Chapter 30: Fuels and Combustion
An Experimental and Computational Study of Interaction between Water Mist and Gas Jet Flame
Application of the Tabu Search Algorithm on Solving the Optimum Heating Institution of Reheating Furnace
Numerical Study on the Interaction of Water Mist with a Fire Plume
Research on Influencing Factors of Methane/Air Combustion in the Ring Porous Medium Burner
Numerical Simulating for Pulverized Coal Combustion and SNCR Reaction Process
Effect of Gasoline Fumigation on Diesel Engine Performance and Emissions
Study on Fuel Economy and Exhaust Emission of Lean-Burn PFI Engines
Structure Optimization of Space Helix TWT Based on Thermal Analysis
Chapter 31: General Mechanics
A Methodology for Deliberating Prediction Criteria
Discussions about the One Time Rotation of a Body of Revolution to the Designated Position
Dataflow Errors Detection in Business Process Model
Mechanical Model's of Conical Valve's Spool-Seat Contact Pairs Based on the Hertz Theory
Research on the Propagation Process of One-Dimensional Stress Wave inside the Projectile
The Simulation of the Influence of Honed Edge Radius on the Cutting Force and Torque in Drilling 42CrMo with K-Grade Carbide Drill Bit
Hoop Membrane Stress Analysis of Elbow-Pipe under Single Internal Pressure
Research on the Engagement Effect of Wedge Tooth
Chapter 32: Geomechanics
The Application of GPS in Glacier Flow Velocity: A Case Study of Qiyi Glacier
Chapter 33: Heat and Mass Transfer
Influence of Working Fluid Thermophysical Property on Thermal Performance of Flat-Plate Closed Loop Pulsating Heat Pipe
Optimization Design of Heterogeneous Injection Mold Cooling System
The Simulation and Analysis of Heat Transfer Process of Honeycomb Regenerator
The Optimization of Bimaterial Microcantilever Design for Radiant Heat Flux Measurement
Temperature Field Analysis of Dispensing Jet Based on GMA
Inverse Identification of Heat Boundary Conditions for 2-D Anisotropic Coating Structures
Preparation and Characterization of Injectable Hybrid Hydrogels Based on Photopolymerziaton
Chapter 34: Instrumentation and Control
Camera Self-Calibration with Planar Pattern Using Genetic Algorithm
Using Optical Flow under Bird's-Eye View Transform to Estimate the Height of Objects around a Vehicle
Theoretical and Experimental Study on Exclusive-OR Gate Difference-Frequency Mixer
Study on the Fuzzy Assessment of Indirect Application Effect of ERP System
The Research of the Flotation Recovery Prediction Methods Based on Advanced LS-SVM
Research of Mining Subsided Land Reclamation System Based on GIS
A Successive Approximation Approach of Nonlinear Optimal Control with R-Rank Persistent Disturbances
Modeling of Dynamic Game-Based Route Guidance System
Application of VE in the Products Function Innovation
A Stable Narrow Line-Width Dual-Wavelength Fiber Laser Based on Nonlinear Polarization Rotation with a High Finesse Ring Filter
The Influence of Modulation Voltage Flyback to LFMCW Radar'S Beat Signal
A Camera Calibration Method Based on Free Points
Research of Tower Crane Suspended Climb Supporting System
The Design of Computer Control System for Grinding-Classification Process
Adaptive Sliding-Mode Control with Self-Tuning Fuzzy Compensation for a Piezoelectric-Actuated X-Y-Z Table
Control System of PDP Lighting Inspection Machine
The Development of ESP Control System Based on the Fuzzy-PID Control Strategy
Study on Combine Harvester Speed Control Based on Optimum Threshing Power Consumption Model
The Research and Design of Elevator Automatic Rescue System
Dynamic Model of Thermoelectric Cooler and Temperature Control Based on Adaptive Fuzzy-PID
Performance Analysis of Radar and ESM Track Association Algorithms
A NURBS Interpolator Using Multiprocessor on Chip for High Performance Motion Control
Study on Current Detecting and Control Method for STATCOM across Transformer
Parameter Optimization of PID Controller Based on an Improved Particle Swarm Optimization for the Induction Motor
Comparison of Different Controllers for Automotive Electronic Throttle Based on Rapid Control Prototype Technique
The Research of Driving Force Distribution under Identical-State-Control while 4WID-EV Driving Straight
Research on Anti-Collision Technology among Tower Cranes
Wheeled Crane Hybrid Power Control System Design
Modeling and Variable Structure Control of Autonomous Underwater Vehicles with Moving Mass
A Buck Converter Based Reduced Voltage Starter for DC Oil Pumps
Direct Adaptive Control of Faulty UAVs via Quantum Feedforward and Fuzzy Feedback
Anti-Explosion Control System for Fine Powder Processing
Circulation Distribution of High Specific Speed Mixed-Flow Pump
Modeling and Control of Forward Converter
Chapter 35: Microwave
Broadband Transition between Substrate Integrated Waveguide (SIW) and Rectangular Waveguide for Millimeter-Wave Applications
Compact CPW-Fed Multiple Broadband Planar Monopole Antenna
Application of the Wavelet Transform for Defect Detection in Prestressing Strands by Guided Wave Technique
Test System for DT-100 Short-Wave Radio's Power Amplifier Based on LabVIEW
Fatigue Damage Characterization of Magnesium Thick Plate Using Nonlinear Rayleigh Wave
Chapter 36: Non-Destructive Evaluation
Estimation of Core Losses on Electrical Steel Laminations in Wind Generators Using Epstein Frame and Expanded GSE Method
Nondestructive Testing of Bridge Cables Using Magnetostrictive Guided Wave Technique
A Sound Sources Locating Method of Constrained Least Squares Based on Time Delay Estimation
Acquisition of FDM Signal by Using Sound Card Based on LabVIEW
Half-Band Filter Design Based on MATLAB and FPGA
Performance Evaluation of Engineering Project Risk Based on Factor Analysis
Polarization Multiplexing, Angle Multiplexing and Circumrotation Multiplexing Holographic Recording Experiments with 3-Indoly-Benzylfulgimide/PMMA Film
Parameter Design Method of Stepped-Frequency Radar to Suppress Clutter
Civil Aeroengine Fault Diagnosis Based on Fuzzy Least Square Support Vector Machine
A Parallel Method for Segmenting Intravascular Ultrasound Image Sequence
Data Acquisition for Output Signal of Linear CCD
An Improved Interrupted Sampling Repeater Jamming to SAR
Carrier Phase Method for Indoor Pseudolite Positioning System
Realizes Data Structure and the Algorithm Dynamic Synchronized Visualization
Research on Relationships among Three Parameters in Short-Term Traffic Flow Forecasting
Microarray Data Classification Based on Evolutionary Multiple Classifier System
Geometric Features Sensitive Mesh Segmentation Orient to Patch-Based Fitting
RFIDTango: A Scenario-Based Massive RFID Data Generator
Triangle Rectangle Method for 2D Irregular Cutting-Stock Problems
Intermittent Intensity Clutter Removal of Wind Profiling Radar Based on FrFT
An Continuous Wavelet Transform-Based Detection Approach to Traffic Anomalies
Application of Image Enhancement Algorithm in Multi-Phase Flow CT System
Image Processing and Recognition System Based on DaVinci Technology for Coal and Gangue
Inspection of Fabric Defects Based on Compactly Supported Biorthogonal Wavelet Transform
Research on Small Signal Stability of SVG DC Voltage close Loop Control
Modeling and Analyzing of Short-Range Air Defense Operation Based on Petri Net
Research on Anti-Collision Technology with Multiple Tags for RFID System
Application of Frequency-Domain Blind Deconvolution in Mechanical Fault Detection
Design of Stabilized Platform Controller for Mobile Satellite Communication System
Measurement on the Dielectric Constant of Grass with Rectangular Waveguide at C Band
Pulse Power Supply Control System
The Design of the Weak Signal Conditioning Circuit
Research for Vision-Based Mobile Robot Self-Localization Strategy
Wavelet-Based Filtering Method for Sleep EEG Signal
On Image Decompression with Embedded Characteristic Information
A USB Interface High-Speed Data Acquisition System
Chapter 37: Automobiles
The Design and Implementation of the Automobile Wiper Test System Based on Hall Sensor and LIN Bus
Performance Parameter Estimation of the Parallel Hybrid Electric Vehicle
Research on Coordination of Evacuation of Human and Car Simulation Optimization Method
Simulating Research of Integrated Control for Automobile Steering Stability
Review on Automobile Steering-by-Wire System Development
Optimization of Suspension Roll Center Height for Vehicle Handling Stability
Design of VCU for Pure Electric Vehicle
Numerical Simulation Key Technical Research of Hot Bend-Forming of Auto Windshield
Depleting Mode Control Strategies for Plug-in Hybrid Electric Vehicles
Analysis and Research on Braking Safe Performance of Long Distance Bus
Design of AC Charging Point for Electric Vehicle
Design and Development of the Stiffness Test System for Car Body Based on Multifunction Data Acquisition Device
Temperature Rise Presentation of Motor of Electric Automobile
Chapter 38: Manufacturing and Production Processes
AE Regularity of Coal Failure Shear Deformation Localization under Triaxial Dynamical Loading
Influence of Element Number on Shape Accuracy in Multi-Point Stretch Forming of Air Craft
A Wavelength Interleaved DWDM ROF System with 60GHz Optical OFDM Signal
The Algorithm of Points Set Extracting from 2D Voronoi Diagram Based on Crystal Growth
The Experiment of Development on Practical Electricity-Saving Socket
Influence of BaB2O4 Glass on the Synthesis of Ba2Ti9O20 Ceramics
The Method Based on Structural Evolution for Recovering Erosion Thickness
Research on Machining Ellipse Gyre Surface with the Ball-End Cutter
Study on Mechanism of Electrochemical Micro-Machining of Titanium Alloys
Non-Isothermal Simulation of Melting Process in Twin Screw Extruder Based on Two Typical Screw Configurations
Measurement and Research of Oscillating State of Hydraulic Oscillation in Slab Continuous Casting
Optimization Design for the Large Gantry Machining Center Crossbeam
Overview of Energy Consumption Model for Manufacturing Processes
Simulating Research on Rod String's Gyro Effect Caused by Eccentric Rotation in Circular Tube
The Optimization Design of the Rotary Worktable for Vertical Lathe Based on Structural Bionic Method
The Effects of Load on the Radial Bearing Properties of Pre-Loaded Cylindrical Roller Bearings
A Method of Reliability Sensitivity Analysis for Gear Drive System
NC Machine Position Accuracy Testing and NC System Error Compensation Analysis
Study on Objective Design for Innovative Product
Research on Prediction of Microstructure Evolution during Mobile Steering Arm Forging Process by FEM
Multi-Axial Fatigue Life Model Evaluation and Life Prediction for Turbine Disk
Coupled Bending-Torsional Vibration Analysis of Rotor System with Two Asymmetric Disks
A Method to Design Common Product Platform Based on Structure Matrix Analysis
3D Numerical Simulation of the Airflow in a Pneumatic Splicer
Numerical Model for Collision Damping of Blades' Tips
The Key Technology Research of Metal Bellows' Virtual Design
Neural-Fuzzy Variable Gap Control Method for GMAW Pipe-Line Welding with CCD Camera
Modeling and Simulation of the Dynamics of the Milling of Ball End Milling
Technology and Application of Oil Sludge Pyrolysis in Rotary Furnace
A Study of Particle Size Distribution from a Low Temperature Combustion Heavy-Duty Diesel Engine
Preparation and Property Study of PMMA/ASA Alloy
Numerical Simulation of Precision Forming for Blade Rotor Based on DEFORM
The Preparation of pH- and Thermo-Sensitive Chitosan-Based Hydrogels by Michael-Type Addition Reaction
Preparation and Photocatalytic Activity of TiO2/Fe2O3 Nanocomposite
Chapter 39: Robotic Automation and Control
The Design of Temperature and Humidity Control System in Multi Incubators Based on Fuzzy Control
Performance Dynamic Tracking and Analysis System of Road Traffic Signs
A Mobile Robot for Replacing Electric Vehicle Battery
Design and Field Test of Virtual Instrument Based Monitor and Control System for Combine Harvester Automation
Laser Navigation System Applied to Weeding Robot
Application of Intelligent AutoCAD in Ultrasonic Inspection of the Welds
Dynamic Analysis and Suspension Optimization for New Energy Vehicle Based FE Model
Realtime On-Road Vehicle Detection Approach Based on Cascaded Structure
Adaptive Servo Control Based on LQR for Flexible Master-Slave System
Study on Intelligent Control of Electric Control Air Suspension
The Design of Liquid Level Detection System for Oil Tank
Auto Identification of Weld Seam's Initial Position for Visual Servoing Weld Robot
Design of the Android Platform Based Electronic-Device Monitoring Terminal
Workload Performance Characterization and Test Strategy of High-Performance Fault-Tolerant Computers Based on BIBbench
Modeling and Embedded Autonomous Control for Quad-Rotor MAV
Design of a Time-Varying Continuous Control to Solve the Potential Field Local Minima Problem
Product Quality Control Based on Medium Logic
Numerically Filtering Based on PLC and the Application in the Control System of the Intelligent Building
Synchronization Controlling for the Chu Chaotic System via Linear Feedback
Analysis and Optimization of Flow Pattern in Inlet Passage of Pumping Station
Research on High Precision and Stability of Three-Phase Rectifier Based on Fractional PI? Order Controller
The Design of a Complex early Fire Monitoring Node
Intelligent Information Flow Based Real-Time Monitoring System of Thermal Power Plant
Heuristic Particle Swarm Optimization for Batching and Scheduling Flowshop with Sequence-Independent Setup Time
Research of Tool Wear Condition Recognition Diagnosis System Based on the Machined Workpiece Surface Texture Image
Research on Process Monitoring and Adjusting Methods
Research on Facility Layout Problems Based on Ant Colony Algorithm
Column Strength and Stability Analysis of Column Pipe Automatic Transferring System
Optimization of FengTai Power Plant 350MW Supercritical Unit Water Supply RB Control Strategy
Direct Torque Control of PMSM Based on Variable Parameter PI and Fuzzy Control
Fault Diagnosis Model Based on Support Vector Machine and Genetic Algorithm
Design Optimization of Beam-Pumping Unit Based on Improved Particle Swarm Optimization
Optimization Study on Leveling Cylinder Position of Telescopic Handler
Local Stability and Hopf Bifurcation Analysis of the Arneodo's System
Automatic Defect Extraction and Segmentation in Welding Seam Based on X-Ray Images
Parameter Estimation of the MISO Nonlinear System Based on Improved Particle Swarm Optimization
Intelligent Monitoring System of Battery Based on CAN Bus
Research on Quality Control Architecture for Multistage Machining Processes in Small Batch Mode
Design of Master-Slave Position Controller of Electro-Hydraulic Servo Tele-Robot
Research on ROI Image Processing Technology of Teleoperation Construction Robot Based on Trinocular Stereo Vision
Control of Transplanting Seedlings Robot Based on 3-CRR Parallel Mechanism
The Structure and Reliability Analysis of Metro Building Automatic System
Research on the Affection of the Underwater Missile Launching Process
Research on On-Line Oil Monitoring System for High Power Mining Gearbox
The Research on Key Technology of Digital Probe Instrument
The Designs of Intellectual Lighting Control System Based on 51 Single-Chip
Research of Power Quality Monitoring System Based on LabVIEW
Pan-Boolean Algebra for PID Control Method
The Research on Turning Operation of Varied Diameter Slender Shaft
Static Analysis and Parameter Optimization of the Grab Bucket
An Improved Multi-Parameters Perturbation Privacy Preserving Association Rules Mining Algorithm
Simulation System for General Aviation Primary Flight Display Based on GL Studio
Development of a Portable ZigBee-Based Nuclear Radiation Monitoring and Detection System
Real-Time Flame Simulation Based on Volume Rendering
Chapter 40: System Dynamics and Simulation
Kinematics Simulation of Steel Tube Rotating Mechanism Based on ADAMS
Multi-Provenance Depositional Model of the early Cretaceous in the South Slope Area of Baiyinchagan Depression, Erlian Basin
The Application of Subsection Simpson Integration on Artillery Firing Efficiency Simulation Modeling
An Algorithm for Mining Frequent Stream Data Items Using Hash Function and Fading Factor
Decision of the Weight of Expert in the Analysis of Creditability of Simulation Model
Observability Analysis for TDOA Passive Localization System
Overall Performance Evaluation of Wind Power and Micro-CAES Hybrid Electricity-Generation System
3D Numerical Simulation of Flow Perpendicular to One Face of a Cube in a Straight Rectangular Duct
Design of Semi-Physical Simulation for Small Satellite by Virtual Display
Simulation of Flow in a Rectangular Meandering Channel
Simulation and Comparison of Adaptive Detection Algorithm
Extracting of Micro Doppler Parameter of Helicopter Rotor Based on Time-Frequency Analysis
Implementation and Experiment Verification of a Metro Power Traction Simulator System
Study on Dynamics Simulation of Rigid-Flexible Coupling for CNC Machine Tool
Open-Loop Speed Loss Compensation Method and Simulation Analysis under Variable Load
Numerical Simulation and Application of Gas Flow Distribution of ESP Transformed to Baghouse in Cement Kiln Head
Dynamic Modeling and Simulation of 3-d.o.f. Vibration Active Isolation Platform Based on Giant Magnetostrictive Actuators
Simulation Analysis of Conformable Substrate on an Eddy Current Sensor Array's Output Characteristics Based on Finite Element Method
Chapter 41: Transport Phenomena
Volume Concentration and Phase Distribution Measurement of Pulverized Coal in the Pneumatic Conveyor
Paleo-Formation Pressure in Storage Layer and its Influence on Hydrocarbon Migration in Dongying Depression
The Experimental Investigation of Energy Transfer in Wall Turbulence Based on Wavelet Transform and FFT and HHT
Chapter 42: Tribology
Research on Dynamic Friction Compensation of High-Speed Precision Slider
Study Friction between Wheel and Rail by Using Molecular Dynamics Method
Indentation and Friction of Cu44Zr43Al10Nb3 Bulk Metallic Glasses on Nano-Scale
Comparative Study of Friction and Wear Behavior of Diamond-Like Carbon Coating under the Lubrication of PAGs Containing Various Additives
Experimental Study on the Frictional Resistance of Gas-Liquid Two-Phase Flow in Vertical Helically Coiled Pipe
Study on Changes of Metal Chemical Composition by Abrasive Wear of Alfalfa Powder
Analysis of the Tire Temperature Distribution Based on Tests
Chapter 43: Vibrations
A Novel Method of High Frequency Weak Signal Detection Based on Chaotic Oscillator System and Wavelet Transform System
Free Vibration Analysis of Cantilever Rectangular Plates with Variable Thickness
No-Load Analysis of Permanent Magnet Spring Nonlinear Resonant Generator for Human Motion Energy Harvesting
Modeling of Rope Longitudinal Vibration on Flexible Hoisting System with Time-Varying Length
The Research of Vibration Characteristic about Sucker Rod String
Chapter 44: Electrical Machines and Drives
Use of Taguchi Method to Optimize the Operating Parameters of a High-Pressure Injector Driving Circuit
Analysis the Reason of Head and Tail Pully Driving and Bidirectional Motor Negative Phase Sequence over Current Protection Malfunction
Research on the Application of IBE in IEC61850 Substation Automation System
Research of the Mechanism of Ferroelectric Phase Transition in Perovskite: Empty Orbital Model
Improvement of Dynamic Stability in Multi-Machine Power System with TCSC Installed in Tie-Line
Finite Element Investigation of the Influence of Thermophysical Parameters on Segmented Chip Formation during High Speed Cutting
Design of PMSM Servo Control System Based on TMS320F2812DSP
High-Performance Speed Sensorless Direct Torque Control of PMSM
Comparison of Performance between Concentrated and Rhombic Windings for a Slotless Brushless DC Motor
Holographic Spectrum in the Remote Rotating Machinery Fault Diagnosis
The Design and Implementation of a BLDC Motor Drive with DTC
Design and Simulation of a Mini Precision Positioning Magnetostrictive Inchworm Linear Motor
Fault Ride through of Doubly Fed Induction Generator Wind Turbine Based on Supercapacitors Energy Storage
Research and Application of Faster Design Support Technology of Wind Turbine Pitch Bearing
Analysis and Optimization of Flexible Supported Drive Train in a Wind Turbine
Dynamic Analysis of Split Stirling Engine
An Investigation on Size Distribution of Exhaust Particulate Emitted from Gasoline Engine
Modeling and Optimizing of Control System with Full-State Feedback and Integral Output Feedback for DC Motor
Experimental Study on Flaw Response in Inhomogeneous Media
Design of Provincial Transportation Data Center for Industrial Integration and Intelligent Analysis
The Research of Multipath and Linear Error for Pseudolites Applications
Chapter 45: Computational Techniques
Quadrilateral Grid Automatic Generation Algorithm and its Application for Multi-Media and Complex Domain
The Research on Hadoop and Cloud Computing-Based Mass Data Storage Model of Computation
Reconfigurable Design and Implementation of Data Extraction and Permutation Facing Stream Cipher Algorithm
Research on Cipher Coprocessor Instruction Level Parallelism Compiler
A New Image Affine-Invariant Region Detector and Descriptor
Dimension-Descending Algorithm for Spherical Delaunay Triangulation
Ergonomics Evaluation of Mobile Maintenance Shelter with Fuzzy AHP Method
Performing Calculation in Interactive Theorem Proving
Image Digital Watermarking Algorithm Based on Arnold Scrambling and Wavelet Transform
Adaptive Image Denoising Based on Sparse Decomposition
A New Phase Noise and Channel Estimate Method in CO-OFDM System
Interference Suppression Detection Algorithms in STBC-MIMO Systems
Research on Software Optimization of Real-Time Processing System Based on DSP
Reactive Power Compensation of Distribution Network Based on Bacterial Colony Chemotaxis Algorithm
Implementation of DES Encryption Algorithm Based on FPGA and Performance Analysis
Research on Tri-Frequency Phase Ranging Method
Design and Implementation of the Embedded Web Control System Based on ARM and Linux
Performance Comparison of LS and LMMSE Channel Estimation Algorithm for CO-OFDM System
Numerical Method with the Third-Order ENO Reconstruction Satisfying Two Conversation Laws for Linear Advection Equation
Implementation of UMTS Protocol CC Sublayer Based on WinCE Embedded System
Research on the Color Calculation Method of LCD Based on the Spectral Radiation
Research on Nearly Orthogonal Two-Dimensional Grid Generation
Capacity Stability Analysis for 4-Element Compact MIMO Systems
A New Method for Improving Infrared Image Quality and its System Implementation
A 2D Numerical Model for Simulation of Two-Dimensional Circular Dam-Break
An Improved Timing Recovery Algorithm Design
The Analysis of the Associated Legendre Functions with Non-Integral Degree
A Hardware Accelerate Simulator for Network Processor Based on FPGA
Loop Extended Symbolic Execution on List Manipulating Programs
Fault Diagnosis of Micro-Grid Based on Advanced Petri Net
Augmented Dickey-Fuller Test and the Lag Length Selection Problem
Generalized Polar Decompositions in Matrix Exponential
Application of Parallel Computation in Numerical Simulation of Laser Propulsion
A Kind of Improved PEG Algorithm of Q-Ary LDPC Codes
The Evaluation of Lightness and Chroma Difference for Images According to Color Difference Formulae
Application of Numerical Simulation for Tire Rolling Resistance Measuring Method
Core Technologies Analysis for End-Hopping System
Numerical Study on Flow Characteristics in a Stirring Vessel
Research of Scalability Model Based on Cloud Storage System
An Image De-Noising Method Using Directions of Wavelet Decomposition Sub-Bands
An Ant Colony Optimization for the Composite SaaS Placement Problem in the Cloud
Image Compression and Transmission System for Digital Down-Hole Television
The Study on the Modeling Method of Complex R and D System
Topology Optimization of Compliant Mechanisms Using Level Set Method without Re-Initialization
Research of Workflow Based PDM System under the Circumstances of Concurrent Engineering
Design and Simulation of a Broad Band Retrodirective Array Element
The Design of Expert PID Parameter Optimized by Genetic Algorithm
Medical Information Sharing Architecture Based on Cloud Computing
Vision-Based Aerial Refueling Docking Based on SURF Algorithm
Solution of Constraint Force of Frame with Shape of T by Principle of Conversion Method
Fatigue Crack Length Real Time Measurement Method Based on Camera Automatically Tracking and Positioning
Creating Logic to Solve the Problems in Modeling for Simulations
The Key Technology of Virtual Reality System Based on Panoramic View
MDO of Anti-Creeper on High Speed Train Using Optimus
Energy and Environmental Scenario Analysis for Residential Sector Based on LEAP
Double-Loop PID Parameter Tuning for DC Motor Based on Modified Particle Swarm Optimization
A Novel Gaussian Particle PHD Filter for Multi-Target Tracking
Fatigue Life Prediction Based on Strengthening and Damaging
Numerical Simulation of 3-D Chemical Non-Equilibrium Flow in the Afterburning Chamber of Solid Ducked Rocket
Digital Image Stabilization Algorithm Based on Mean Shift Corner Tracking
The HGEDA Hybrid Algorithm for OLAP Data Cubes
Exact Mathematical Model and its Numerical Solution of a Two-Layer Beam Subjected to Non-Uniform Temperature Rise
A New Multi-User Beamforming Algorithm
Context-Aware Model Based Facial Expression Nets Analysis
A Knowledge Based Threat Analysis in Trustworthy Software Engineering
Application of Least Square Influential Coefficient Based on Particle Swarm Optimization in Dynamic Balancing Measuring
Chapter 46: Turbulence
Study on the Wind Energy Utilization Coefficient Surface Identification of Wind Turbine
Rotational Speed Control of Wind Power Generation Systems with Variable-Speed and Variable-Pitch
Chapter 47: Oil and Gas Exploration
Reservoirs Distribution and Hydrocarbon Accumulation of Ordovician Carbonate in Tazhong Uplift, Tarim Basin
Chapter 48: Resistance and Propulsion
Elimination of Scan Blindness in Rectangular Waveguide End-Slot Phased Arrays Using High-Impedance Surface
Research on Recovery Voltage from Circuit Breaker Cutting Off Various Transformer Faults
Chapter 49: Solid Mechanics
Analysis on Stress and Deformation of Low Elastic Modulus Concrete Cutoff Wall inside the Dam Body
Effect of Solid Solution under High Pressure on the Microstructures and Mechanical Properties of AM60B Alloy
Automatic Thermal Expansion Compensation of the Precise Grinding Machine AMB Spindle
Chapter 50: Electronics and Electrical Materials
Charge Strategy Study for Supercapacitors Applied to Regenerative Energy System in Elevator Application
One Optimum Design Method of Dry-Type Air-Cored Reactors
Research on Properties of PZT Piezoelectric Ceramics by Finite Element Softeware ADINA
The Experimental Research of Magnetic Powder Brake Loading Characteristic in Rotary System
A Research for Broadband Modeling Method of Electro-Absorption Modulator
Downlink Congestion Control for TD-SCDMA Trunking System
A 3.1~10.6 Ghz Ultra-Wideband SiGe Low Noise Amplifier with Current-Reused Technique
Defected Microstrip for Dual-Mode Bandpass Filter Applications
Quantum Effect in the Mesoscopic Open Electron Resonator
Design of C-Band Wideband Sweep Frequency Source
A High Linearity Folded Gilbert Mixer for 2.4GHz Application
Design and Implementation of a Wideband C-Band LNA
Study on Discharge of Separated Water Droplets in DC Field
A Study on the Harmonic Wave of SPWM Voltage Source Inverter
Design of a down-Conversion Mixer for Four Sub-Harmonic in W-Band
Research on Differential-Mode Conducted EMI of Three-Phase PWM Rectifier AC Side
Zero Error Analysis and Compensation of No-Beat Time Division Multiplier
Structure and Magneto-Resistance in Nanostructured Sr2Fe1-xCrxMoO6 (0?x?0.3) Double Perovskite Componds
Influence of Tungsten Doping in La2Mo2O9 Oxide-Ion Conductors by Dielectric Relaxation Measurements
Target Tracking Based on Particle Filter with Multi-Path Particles
Quasi-Monte Carlo Gaussian Particle Filtering Acceleration Using CUDA
Liquid-Phase Diffusion of Phosphorus Atoms in Laser-Doped Crystalline Silicon Solar Cells
Establishing Mathematics Model of Pole Gap Parameters in the High Frequency Short Pulse Electrochemical Machining
Micro-Simulation of Concrete Based on the Zero-Thickness Interface Element
Thread-Piezoelectric-Substrate Based Low-Cost Microfluidic Device
The Mixed Method Analysis of Higher Order Mode in Waveguide of Piecewise Homogeneous Dielectric
Research on SOC Estimation of LiFePO4 Battery in HEV
Modulus and Internal Friction of W-Doped VO2 Thin Films
A Fuzzy-EAHP Method of EW Equipment`s Reliability
Cellular Pattern Evolution of Deflagration-to-Detonation Transition in Square Detonation Tube
Design of Control System for Micro Tracklayer Based on ?c/os-?
Research on Self-Generated Voltage of Friction Pair in Dry Wear Process
Double-Loop Push-Pull Forward DC/DC Converter Control System
High Efficiency Laser Diode Power Supply
Stray Losses Study for a Power Transformer Based on 3D FEM
Structure Optimization of Piezoelectric Micromachined Modal Gyroscope
Chapter 51: High Voltage Techniques
Study on High-Voltage Power Supply of Plasma Generator
Modeling and Analysis of Small Scale High-Voltage Charging Circuit under Discrete Time Domain
213 W 500 Mhz 4H-SiC Static Induction Transistor
Chapter 52: Robotics and Automation Systems
Man-Machine Cooperated Dynamic Schedule Orienting Disturbance in Steelmaking
Fabrication of 10Gbps TOSA Packaged EML Module Based on Optimized CPW Feed Line
Numerical Simulation of Traffic Flow in the Tollgate Area with Variable Speed Limits
Implementation of a New Travel Time Estimation Method for Demand Forecasting Models
Design of Intelligent Electrode Design System
Automatic Airport Extraction Based on Improved Fuzzy Enhancement
Application of Cluster Analysis and Trend Extraction in Wind Speed Series Consistency Correction
Model Predictive Control for Multilevel Inverters in Microgrids
Modeling and Simulation of Brushless DC Motor with Nonideal Back EMF
MPPT of Photovoltaic Power Generation Based on Double Fuzzy Controllers
Study of Remote Control of Non-OS Embedded Instrument Based on LXI Bus Technology
Application of HHM in Risk Identification of Tunnel Project
A Novel GNSS Carrier Tracking Loop Design Based on Fuzzy Logical Control
Design of Fuzzy PID Controller for Water Level of Boiler Steam Drum Based on DSP
Constant Pressure Water Supply System Based on Fuzzy-PID Control
A New Application Scheme of BPLC in Smart Home
Nonlinear Inertia Weigh Particle Swarm Optimization Combines Simulated Annealing Algorithm and Application in Function and SVM Optimization
Simulation of an Improved Method of Maximum Power Point Tracking for Photovoltaic Array
The Application Design of the Heating Boiler System
Application of Accelerated Iterative Method in Calculating Wave Length in Harbor Engineering
Study on AGC Control System of 300 Reversible Cold Strip Mill
Application of ARM in BLDCM Control System
Nonlinear Modeling and Simulation of Pneumatic Servo Position System of Rodless Cylinder
Elevator Door Automatic Control System
Elevator Brake Release Automatic Control System
Design of Intelligent Aim System of Tear Bomb Emitter Based on Binocular Stereo Vision
Anti-Rear-End Collision Warning System Based-on Zigbee for Highway Vehicle
The Potential of Phosphorus Removal in UASB Reactor
Temperature Control System of Annealing Furnace Based on Smart Meters and PC
The Intelligent Monitor System for Battery
Study on the Modeling of Main Mine Ventilator Based on Artificial Intelligence
Space Positioning of the 5-DOF Robotic Excavator
Behaviour and In Situ Tests of Self-Drilling Prestressed Anchors
An Application of Machine Vision in Automatic Mobile-Phone Lens Assembly Equipment
An Online Visual Inspection System for Oil-Seal Dimension
A Self-Adaptive BMS Based on CAN-Bus for Power Li-Ion Battery
Application of Multi-Objective Artificial Immune Optimal Algorithm in the Elevator Group Control System
Adaptive Control of Machining Process Based on Fuzzy Wavelet Neural Network and Generalized Entropy Square Error
Automatic Anti-Icing Robot of High-Voltage Transmission Wire
Research on Real-Time Measuring Method of Dynamic Deformation Based on Machine Vision and its Application
Automated Image Processing for on-Line Photogrammetry
Research on the Design of Automated Hemorheology Analyzer
Application of Cutter Radius Compensation in CNC Machining
An Improved Hybrid Discrete Particle Swarm Optimization Algorithm to Solve the TSP Problem
Analysis of Nonlinearity in High Speed Differential Phase Shift Keying Optical Transmission System
Chapter 53: Electromagnetics
MHD Flow of Shear-Thinning Fluid over a Rotating Disk with Heat Transfer
Chapter 54: CFD
Numerical Study on Turbulence Modification in Particle-Laden Pipe Flows
Comparative Analysis on OQPSK and QDPSK of Continuous Pressure Wave System in Drilling Fluid Channel
Numerical Simulation of 2D Flows with Hydraulic Jump Using Shallow Water Equations
Numerical Simulation of 2D Dam-Break Flow in a Vertical Plane
Numerical Simulation of Flow in a Horizontal Sedimentation Tank
Numerical Study of Non-Newtonian Liquid Sheet Primary Breakup
Application of C4D Technique to Void Fraction Measurement of Gas-Liquid Two-Phase Flow: Stratified Flow
Computations of Transient Flows and Sprays of Port Fuel Injector
CFD Analysis of Two-Phase Flow in a Solid-Liquid Hydrocyclone
CFD Simulation of Two-Phase Flow in a Downhole Venturi Meter
A High-Speed and High-Precision Compound Algorithm Combining PID with MRAC for a Flow Control System Based on the Lyapunov Approach
Research on Pressure Resistance of Piston Type Submersible
Numerical Analysis for Twin Screw Pump Internal Flow
Chapter 55: Compressible Flows
Study of Liquid-Solid Two Phase Flow in the Volute of Centrifugal Pump
Chapter 56: Nonlinear Dynamics
Solitary Solution of Nonlinear Equation by Homotopy Analysis Method
Optimal Control Design for Nonlinear Systems with Disturbances
Numerical Solution of 2D Flow in Sharply Curved Channel Using a Local Coordinate System
The Research of Automatically Determine the Feature Information of Radiation Emission Test Curve
Infrared Target Background Suppression Method Based on PDE and Morphological Filtering
Chapter 57: Operations Management
Study and Implement of the Production Management and Cost Control Platform of the Manufacturing Enterprises
Effect of Tillage Systems on Soil Profile Construction and Aggregate Stability in the Songliao Plain Cornbelt
A Novel Method for Snowboard Course Design
Data Stream Frequent Closed Item Sets Mining Based on Fast Sliding Window
Security Risk Analysis of Nuclear Power Plants Based on Fuzzy Comprehensive Evaluation
The Application of Statistical Analysis Technique in Welding Training
Stochastic Traffic Assignment Model Based on Travel Time Reliability
Traffic Flow Model Modification on Ice Condition of Road
A Fuzzy Logic Based Information Security Risk Assessment Method
Balancing and Optimization of Vacuum Cleaner Assembly Line
Chapter 58: PC Guided Design and Manufacture PC
Design and Implementation of a IPTV Widget System for ST-9150
The Optimal Design of ECT Electrodes Array Based on APDL
Relationship between Output Parameters and DOF of Single Loop Mechanism, Link Group
Customized Design Support System for Manufacturing Enterprise and its Implementation
Seam Deviation Detection and Stitching Simulation of 3D Composite
Dynamic Modeling of the Variable Rope Length 3D Crane System of a Bridge Crane
Customer Clustering for Product Green Design
Design of Blank Thickness on-Line Monitoring System of Continuous Flat Press in Wood-Based Panel Industry
Chapter 59: Pollution and Environmental Engineering
Spatial Distribution of Heavy Metals in Surface Soil of Zhejiang Pinghu
SAGE Model Analysis and its Application in Civil Aviation Engine Emission
Effect of Different Photoperiodic on Flowering in Dendranthema lavandulifolium
Decolorization Effect of Mycelium Pellet on Saline Azo Dye Wastewater
Analysis for the Uncertainty and Changeability of Groundwater Causticity
The Research Progresses of Controlling and Repairing of Water Pollution and Biotic Integrity Maintaining
A Phytoplanktonic Investigation and Water Quality Assessment about Tanjiang River
Experimental Study on the Release Characteristics of Chlorine and Alkali Metal during Co-Firing of Wheat Straw and Lean Coal
Research on Multi-Information Fusion Control System of Textile Workshop Environment
Performance Analysis of Existing 600MW Coal-Fired Power Plant with MEA-Based CO2 Capture
A Model for Calculating the Outlet Flue Gas Temperature of FGD Absorption Tower
Investigation and Analysis on Operation of Combined Wastewater Treatment Plants in Sunny and Rainy Days
Chapter 60: Precision Mechanics, Mechatronics
A Shot Boundary Detection Method Based on PSO-SVM
Image Based Positioning of the Freightcar's Running Gear Springs
Application of Castor Oil-Based Cutting Fluids in Precision Turning
Development and Application of PCBN Tools Used in High-Speed Milling 30CrMnSiA
A MIL-STD-1553B Bus Command Optimization Algorithm Based on Load Balance
Chapter 61: Production Technology
A New Approach to Determine Water Influx Rate for Reservoir with Bottom Water
Study of Delivery Quantity Model under the Condition of MTO
Simultaneously Monitoring of Chromatic Dispersion and Polarization Mode Dispersion for DPSK Signal Based on RF Spectrum Analysis
Performance Analysis of Application Layer FEC to Disaster Warning Distribution Based on COMPASS/Beidou
Research on Reliability Evaluation Based on Monte Carlo Method
Moving Object Detection and Tracking in outside Environments
Online Fatigue and Creep Monitoring System for 2-D Axis-Symmetry Components in Power Plants
Study on Stochastic Assembly Line Balancing Based on Improved Particle Swarm Optimization Algorithm
Field Reliability and Maintenance Analysis of a Heavy Engineering Vehicle
Study on Rapid Modeling of Spline Based on Pro/E Secondary Development
Research for Computer Integrated Manufacture in Complex Shape Piston of Diesel Engine
The Model and Optimization for the Discrete Operations Workshop Layout Based on Multi-Agent Theory
Structure Design and Test of the High Pressure Vessel for Corrosion Testing
Process Optimization of Cake Oriented Screw-Pressing of Jatropha curcas
Design of Environmental Information Monitoring System Based on ZigBee CC2430
Chapter 62: Fatigue and Fracture
Experiment Techniques of Mechanical Properties of Brittle Materials with Pre-Existing Cracks
Mechanisms of 3-D Internal Cracks Growth and Coalescence in PMMA
Chapter 63: HVAC
Central Air-Conditioning Duct Cleaning System Based on SRV1
Chapter 64: Circuits and Systems
FPGA Based Testing Method to Improve Digital IC Testability
A New 3D Cubic Chaotic System and its Circuitry Implementation
Comparison and Analysis on Two Improved Detecting Methods for Harmonics without PLL in Single-Phase Circuit
A Design of Micro Magnetic Detection and Localization System
The Design of CAN/USB Embedded Adapter
Design and Application of the Embedded System Based Online Monitoring SiO4-2 Instrument
Offset Optimization Method of Arterial Traffic Control
A Design of VB-DDC Using DA-Based Systolic FIR Filter
Application of PLC Pulse Command in the Step Motor Position Control
Quantization of Mesoscopic Quartz Piezoelectric Crystal Equivalent Circuit
Study on the Critical Heat Flux Mechanism Model under the Condition of Low Velocity and Subcooled Boiling in the Narrow Channel
Based on Taguchi Analysis for High Power LED Liquid-Cooling System Design
Parameterized Computing System on Structure of Lift Scaffolding Attached to the Wall
Inspection and Test System of the Lighting Inspection Machine
Remote Control Based on Android Phone
Dynamic Response of Cantilever FGM Cylindrical Shell
Switched Controller Design for DC /DC Converter
Design and Implementation of Real-Time CNC Interpolation ASIC for Pythagorean Hodograph Curve Based on FPGA
Performance Analysis of CAES Power Plant Energy Storage Sub-System for Wind Power
Chapter 65: Antennas
A Novel Arc-Shaped Printed Antenna for WLAN Applications
A Novel Slot-Ring Coupling Antenna with Switchable Polarization
RETRACTED: A Case for A-Star Search
Inset-Fed Patch Antenna for LTE Application
The Design and Implementation of Antenna Pattern Simulation System
Design of GPRS Based on MCU STC12C5A60S2
Chapter 66: Optoelectronics
Resolution Improvement with Two-Dimensional Digital Focusing Method in Optical Coherence Tomography
Multi-Wavelength Fiber Laser Based on a High Finesse Fiber Ring Filter and Multimode FBG
Improved Method of Target Detection on Optoelectronic Hybrid Joint Transform Correlator in Cluttered Scences
Key Factors in Fiber Point Diffraction Interference Technology for Measuring Surface
A New Kind of Polarization Controller Design
Simultaneous Measurement of Temperature and Refractive Index Using a Fiber Bragg Grating and a Multimode Fiber
A Stable and Switchable Narrow Linewidth Fiber Laser
Experimental Study on Etched Micro-Structured Fiber Bragg Grating
Research on High-Precision Intelligent PWM Optically Controlled LED Road Illumination Drive Power Supply
An Experimental Investigation on Controllable Slow Light Based on a New-Type Multi-Stage Delay SBS Structure
Design and Experimental Test of Fiber Bragg Grating Rotate Speed Sensor Elastomer
A Lightweight Dynamic Binarization Method for 2D Barcode Scanning Terminal
Study on Light Intensity Enhancement of ZnO/ITO/P-GaN Light-Emitting Diodes
A Silicon Capacitive Seismic Accelerometer with a Simple Fabrication Process
The Application of Particle Swarm Optimization Algorithm in the Production Scheduling Modeling of ERP-Based
Application of Direct Actuated Digital Servo Valve in Electrohydraulic Static Loading System
Optical Path Analysis of the Optical Fiber Bundle Hydrogen Sensor
A Novel Optical Sheet with Microstructures Design in the LED Direct-Lit Backlight Module
Research on the Light-Sensitive Character and the Morphologies of WO3 Synthesized Using the Hydrothermal Method
The Test Method Research of Electric Light Sources Parameters and Detection of Uncertainty Evaluation
Analysis and Design of IGBT Driving and Protection Circuit for Photovoltaic Grid-Connected Inverter
Two-Colour Mid-Infrared Optical Absorption under Electric Field in an InAs/GaSb-Based Type II and Broken-Gap Quantum Well
Chapter 67: Biomedical Electronics
Chiral Separation of Non-Natural Carboxylic Amino Acid by Capillary Electrophoresis with CD Derivations as Chiral Selective Material
Chapter 68: Sensors
Comparative Analysis of Two Land Surface Temperature Retrieval Algorithms Based on Multi-Source Remote Sensing Data
Design of Multi-Channel Temperature Acqusition System Based on MSP430
Research on the Array Type Infrared Radiation Thermometer
Research on Sensor Data Fusion Technology in Vehicle Weighing-In-Motion
Design of Three Voltage Level Test System for Auto Sensor Based on LabVIEW
Application of WNN in Ring Ball Gratings Torque Sensor's Signal Demodulation
Research on Natural Gas Pipeline Leak Detection Based on Airborne Laser Remote Sensing
Analysis on the Influence of Random Vibration on MEMS Gyro Precision and Error Compensation
Effect of Laser Beam on Double Wire Pulsed MIG Welding Process
The Simulation Research of New Induction Heating Power
Study on Linearity Correction Scheme for VCO Tuning Characteristics
Experimental Research of Strain and Temperature Based on EFPI Sensor
The SMS Backhaul of WSN Monitor System in Landslide
A Note on Stability and Instance Optimality in Compressed Sensing
A Compact on-Line Particle Counter Sensor for Hydraulic Oil Contamination Detection
Influence of Carbon Dioxide on the Characteristics of a Limiting Current Oxygen Sensor
Fiber-Optic Sensing of Coal Mine Gas Based on Fabry - Perot Interferometer
The Application of Temperature Sensor TMP36 and the Assembly Algorithm of Multidigit Decimal Resolving
High-Performance Readout Circuit for Monolithic Integrated Pressure Sensor
Calibration Principle and Implementation Method Based on MMA7455L
Multi-Sensor Combination Intelligent Vehicle Control System's Design Based on HCS12X
BISS: A Built-In SEU Sensor for Soft Error Mitigation
Error Factors Analysis of Large Range Flexible Jionts Six-Axis Force Sensor
Vibration Analysis of a Micromachined Modal Gyroscope Based on Elastic Body
Chapter 69: Manufacture and Operation of Electrical and Electronic Systems
Feasibility Analysis of Tripping in Small Current Grounding System
The EMF-PF Fill Height Measuring Technique Using Multi-Electrodes in Parallel Connection
A Parallelizable Adaptive Method to Update Close-Loop Digital Predistorter for RF Power Amplifiers
Generalized Predictive Control for Rotary Inverted Pendulum System
Research on Control Strategy of Grid-Side Inverter in Direct Drive Wind Power System
Design and Implement of Three-Phase Inverter System with Double Mode of Grid-Connection and Stand-Alone
Study and Analysis a Powerful Debug Method for Smart Mobile Systems
The Simulation of Digital PI Controller Based on VHDL
Optimization of Reactive Power in BenXi Steel Distribution Feeders Based on RARW-GA
Approach of Image Edge Detection Based on Wavelet Scale Multiplication
A Long Sequence Length, Reduced Complexity MASH 1-1-1 DDSM for Fractional-N Frequency Synthesizer