Material Science, Engineering Research, Management and Information Technologies

Preface and Committee
Chapter 1: Materials Science, Processing and Application
Reseach on Material of Steel Grid Strcuture with Assemble of Grid Frame of Museology Museum
Research on Material Selection Construction Method Construction Technology with the High-Support Formwork Construction of NingBo Cultrural Plaza Grand
Orthogonal Experimental Study on the Mixing Proportion of Reactive Powder Concrete
The Feature of Symmetric Frames and Two-Directional Vector Wavelets and Applications in Material Science
The Research of Dual Quarternary Pseudoframes for Hardy Space and Applications in Engineering Materials
Test Methods Research of Cracks in Ceramics Based on Genetic Algorithm
Application of Synthetic Substitute Materials on Reconstruction of Anterior Cruciate Ligament of Knee Joint in Exercise-Induced Injury
Composition Limy Binder with the Use of the Synthesized Aluminosilicates for Dry Construction Blends
Composite Nondestructive Testing Technology
Identification of Soluble Organic Compounds from Shengli Lignite in Toluene/Ethanol Mixed Solvent
Cold-Start Emissions of an SI Engine Using Butanol/Gasoline Blends
The Research Status of the Preparation and Properties of the Tungsten Heavy Alloy
Dye-Sensitized Solar Cells Assembled with Modified Photoanode and Carbon Nanotubes as Counter Electrode
Synthesis and Characterization of Fluorine-Doped Tin Oxide Nanocrystals Prepared by Sol-Gel Method
Analysis and Probe of the Causes and Solution of Cracks of Precast Concrete Lightweight Partition Board
Conductive Silver-Modified TiO2 Nanoparticles Prepared by a Silver Mirror Reaction
Material Balance Method Combined with Hydrocarbon Generation Kinetics to Calculate the Efficiency of Hydrocarbon Expulsion
Preparation and Coagulation Performance of Polymeric Aluminum Zinc Ferric (PAZF) from Galvanized Aluminum Slag
Characteristic of a Novel Composite Inorganic Polymer Coagulant-PAZF Prepared from Industrial Wastes
A Novel Soft Paper Prepared by Hydrothermal Synthesis of Ultralong TiO2 Nanofibers
Separation and Acidic Solution Washing for Heavy Metals from Contaminated Soils
Effect of Scrap: Sponge Ratio on Mechanical and Corrosion Properties of Zr-1Nb-0.7Sn-0.1Fe Alloy
Microstructure and Deformability of Cast Zr-Nb-Fe-O Alloy with High Iron and Oxygen Content
Application of High Styrene Rubber Materials on Improved Tennis Performance
Study of Enhanced Surface Raman Scattering on Nano-Particle in Terahertz Range
Application of Green Packaging Material with a Necessary Analysis on the Packaging Design
Effect Analysis of Temperature on the Rubber Material Stress-Strain Relationship
Study of Performance on Reduce Fragility and Increase the Toughness of Fly Ash Ceramsite Concrete
Study on the Oxidation and Spontaneous Combustion Characteristics of Jurassic Coal in North Shaanxi
Correlation between Zener-Hollomon Parameter and DRX Critical Parameters of a Fe-Cr-Ni Super Austenitic Stainless Steel during Hot Deformation
Effects of the Binders on the Storage Stability of the Silicon Delay Composition
Applied Technology with Methods for Measuring Sulfur Blank Values by Using Infrared Absorption Method
Chapter 2: Energy, Power and Heat Engineering
Study on Region Energy Allocation under Carbon Emission Constraints: Base on Analysis of Carbon Pinch
Research on Energy Saving of Appliances with Evaluation Method and Application of Appliances Green Degree Based on Fuzzy-EAHP
Application of Wind-Solar Hybrid Energy for Optimization and Design for Seawater Desalination System
Energy Saving Analysis of Clean Air Conditioning System in Pharmaceutical Company
Analysis of the Influence Factors of Energy Consumption in Pharmaceutical Industry
Research on Energy Saving Diagnosis of Clean Air Conditioning System in Pharmaceutical Industry
Shallow Geothermal Energy in the Application of Building Energy Saving in Shijiazhuang
Research on Electric Power with Development and Application of Line Loss Rate Forecasting Software Based on MLRM-GM
A New Characterization Measure of the Degradation of Power Battery Based on Declining Point
Research on Thermal Balance with Critical Density in the Zero-Range Process with many Defect Sites
Research on Thermal Balance with One-Dimensional Zero-Range Process Model (ZRP) and Dynamics
Thermodynamics Analysis and Mathematic Proof of the Error of the Equivalent Enthalpy Drop Partial Quantitative Method (EEDPQM)
Analysis on Petrophysical Properties of the Shale Gas Reservoir
Study on Influencing Factors of Thermal Analysis Experiment on Coal Oxidation and Spontaneous Combustibility
Parameter Matching and Simulation for Powertrain System of Pure Electric City Bus
Influence of Flap Deflection Angle on Wind Turbine Airfoil with Trailing Edge Flaps
Chapter 3: Construction and Civil Engineering
Research on Mining Engineering with Dual Gradient High Inclination-Angle Fully Mechanized Mining Technology
Study on Method for Building Horizontal Deformation Based on Material Properties and Coordinate Transposition
The Horizontal Deformation Model of the Landslide Based on Material Properties and Partitioning Method
Application of Spline Function Based on Material Properties in the Deformation Analysis
2D Numerical Analysis on Influence of Embankment's Security and Stability Caused by Shield Tunneling
Study on Direction for Land Reclamation Engineering in Limestone Mining Area - The Case of Limestone Mine Land in Tongyuanpu, Fengcheng
Chapter 4: Environmental and Chemistry Engineering
Environmental Research on the Effects of Fenton Reaction Conditions on the Dehydration Properties of Lake Dongting Mud
Environment Research with Progress of Bioremediations for Aquaculture Effluent
Optimization of Coagulation Process for Disperse Navy Blue Dye Wastewater Treatment Using Response Surface Methodology
Studies on Adsorption Kinetic of Cd 2+ by ?-MnO2
Treating Disperse Dye Wastewater with Organic Clay
Environmental Study of the Design and Operation of the SCR Flue Gas Denitration Project
Soil and Water Conservation Society and the Construction of Ecological Civilization City
Environmental Pollution in China's Urbanization Process and its Enlightenments
Excess Heat Measurement and Transmutation Study of Pd Wires after Lasers Stimulation in a D2 Gas-Loading System
Research on Problems and Disposal of Municipal Solid Waste in China with Current Management Model and System
Gas Generation Regularities of Dissipated Soluble Organic Matter in Sichuan Basin
Chapter 5: Control Engineering and Monitoring
Optimization of Control and Combustion on a 330MW Face-Fired Boiler
Analysis of Typical Driving Condition Test and Control Strategies Based on Toyota Prius
The Design of STM32 Embedded Data Gathering Control System Based on GPRS Network
A Study of Remote Monitoring Fire Alarm System Based on Internet of Things
Combined Test of Capacity Regulating in 1100kV Controlled Shunt Reactor Valve-Control System
Adaptive Fuzzy Sliding Mode Control for Brushless Double-Fed Wind Power Generation System
In-Vehicle Temperature Regulating System Based on Theory Calculation
A New Method for Multi-Fault Diagnosis of Rotating Machinery Based on the Mixture Alpha Stable Distribution Model
Study on Water Engineering with Hydromechanics and the Bubble Float Flow Measuring Method
Chapter 6: Design and Modeling in Mechanics and Construction Engineering
Numerical Design of Pillar Width in the Inclined Coal Seam
Multi-Objective Optimal Design of a Double Circular Gear Based on the Differential Evolution Algorithm
Design of Wireless Sensor Gateway Based on ARM
Numerical Simulation on Stress Distribution of the Inclined Coal Seam under Different Pillar Width
Analytic Study of Structural Stability at High Temperature of Structural Beam Made of SM 400
Hydromechanics Analysis and Simulation on Three-Dimensional Flow Field of Marine Propeller
Dynamic Response Analysis of Ocean Drilling Derrick under the Dynamic Load
Study on Light HVDC Converter and Harmonic Suppression of the Active Filter
Analysis and Research on Flight Mechanics with Air-Wake around Large Warship Decks
Applied Mechanics in Moving Boundary Problems of One-Dimensional Non-Darcy Flow in Semi-Infinite Long Porous Media
Research on Gun Dynamic Characteristic under Muzzle Strong Impact
Design of Artillery Recoil Distance Automatic Recording and Limit Distance Alarm Device
Dual Analysis of DC Chopper Circuit with LC Input Filter
Research and Application of Aeroelastic Analysis Based on Fluid-Structure Interaction
Chapter 7: Management, Computation and Information Technologies
Applied Technology in Dynamics Study for Projecting Deployment of a New Anti-Riot Net
Applied Technology in Image Retrieval via 8-Direction Gaussian Density in the DCT Domain
The Application of Stress Testing and Applied Technology in Credit Risk Management
Research on Applied-Information Technology in Reformation System of the Physical Examination Mode of School Infirmaries
Research of Software Test Technology in Airborne Software Based on GCC
Research on Applied-Information Technology with Inter-Partition Integration Testing Strategy under IMA Architecture
Research on Information Engineering with Information Technology for E-Learning Based on Face Recognition
An Information Retrieval Expansion Model Based on Wikipedia
Information Technology in Intelligent Warehouse Management System Based on ZigBee
Research of Engineering Spot Attendance and Employee Information Management Integration System
Research of a Novel Automatic Management System for Material Storages
Research on Information Processing with Release Method of Railway Freight Loading Information Based on Dynamic Planning Model
Applied Technology for Typical Attacks and Security Mechanisms in Wireless Sensor Networks
Applied-Information Technology for Brand Image towards the Usage of iPhone
An IMU Static Attitude Angle Calibration Method Based on Total Station
Information Technology in Multi-Object Tracking Based on Bilateral Structure Tensor Corner Detection for Mutual Occlusion
Design and Implementation of Security Network Optimization
Data Analysis and its Application of Network Security
Data Processing in Moving Boundary Problems of One-Dimensional Non-Darcy Flow in Semi-Infinite Porous Media
Data Processing with Transportation Cost Allocation Method of Formwork and Scaffold Leasing Companies Based on Supply Chain
The Design of Software Protection Mechanism Based on Virtual Machine
The Study of Tight Periodic Wavelet Frames and Wavelet Frame Packets and Applications
Engineering Research with Application of System Dynamics Model of Risk Identification in Railway Construction Project
Research on Technology Industry Value Chain and its Properties
Research on Management Engineering with Data Processing for Relationship between Equity Structures and Operating Performance - Take the Utilities Listed Companies as Example