Manufacturing Engineering and Automation I

Committees and Preface
CHAPTER 1: Nanomaterials
Fabrication, Characterisation and Application of Carbon Nanotube Polymer Composites
Influence of Multi-Walled Carbon Nanotubes on the Mechanical Properties of Nanocomposites
Modeling of Piezoelectric Ceramics Based on Partial Least-Square Regression Method
Mesh-Free Numerical Simulation for Carbon Nanotubes upon Bending

Ab Initio Study of the Structural and Mechanical Properties of Hf-Si-N
Nanocomposite Materials Design and the Sintering Optimization Based on Interface Strengthening
Influence of Nano-CaCO3 on the Properties of Magneto-Rheological Fluid
Study on the Preparation of Fe3O4 Nano-Magnetic Fluid for Seal
Hybrid Finite Element Formulation for Temperature Prediction in Carbon Nanofiber Based Composites
Effects of Immersion Time on the Electrochemical Impedance Spectroscopy Model of Epoxy Coating Modified by Nano-Sized Titanium
Studies on the Growth Mechanism of Onion-Like Fullerenes by Arc Discharge in Liquid Benzene
A Self-Assembly Approach to Fabricate Bi2S3 Nanorods
CHAPTER 2: Advances in Composites
Investigation on Drilling-Induced Delamination of CFRP with Infiltration Method
Tensile Strength Prediction of Woven Composite Bonded Joint
Synthesis of Al2O3/AlB12/Al Composite Ceramic Powders by High Frequency Induction Heating Method and a Study of Their Mechanical Properties
Study on Mechanical Properties and Physical Properties of Copper Based Electrical Contact Materials Reinforced by CNT
Penetrating Resistance of the Laminated Composite with Stepwise Graded Foam
Carbon Fiber Paper Modified with Carbon Nanotube for Proton Exchange Membrane Fuel Cell
Optical and Electronic Properties of Mn-Doped ZnO Films Synthesized by RF Magnetron Sputtering
Mechanical Analysis of Unidirectional Fiber-Reinforced Polymers under Transverse Compression and Tension
Effect of Core-Shell Particles on the Properties of Polystyrene/TiO2 Nanocomposites
Study on the Processibility of BMI for RTM Process and Mechanical Performance of Carbon Fiber Three-Dimension and Five-Direction Braided/BMI Composites
Experimental Study on the Tribological Behavior of CaCO3/PEEK Composites under Water Lubrication
Effect of Sn on Glass Formation Ability and Crystallization Behaviors of Cu-Based Bulk Metallic Glass Alloy
A Boundary Element-Free Method for Fracture Analysis of 2D Anisotropic Solids
Preparation and Performance of the Magnesium Matrix Composite Reinforced with Al2O3-SiO2 Short Fibers
Study on the Anti-Oxidant Property of Copper Powder Coated Silane Coupling Agent in Isotropically Conductive Adhesives
Tribological Properties of ZrO2 Ceramics under Vacuum Condition
Effects of Weaves on the Tribological Properties of Hybrid Kevlar/PTFE Fabric Composites
Effects of VA Content and Melt Index of EVA on Mechanical Properties of Wood Plastic Composites
Stab Resistance of Thermoset-Impregnated UHMWPE Fabrics
CHAPTER 3: Materials Characterization
Stress Analysis of Composite Material Embedded with Optical Fiber Sensor Subjected to In-Plane Shear
Sintering Effects on LSCF Cathodes for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs)
Electrophoretic Deposition of La0.6Sr0.4Co0.2Fe0.8O3-? Cathode Film on Stainless Steel Substrates
Optical and Structural Properties of ZnS Thin Films Grown by CBD Technique
Preparation of Titanium Dioxide Paste for Dye Sensitized Solar Cells (DSSCs)
Optimization of Heat Treatment Parameters with the Taguchi Method for the A7050 Aluminum Alloy
Development of Electropulsing Treatment Device Based on Capacitor Energy Storage and Discharge
Framework of Surface Integrity Model for Machined Components
Effect of Weld on Axial Buckling of Cylindrical Shells
Sensing Analysis of Aluminum Alloy Materials Based on Chemical Acoustic Emission Signals
Effect of Plastic Deformation on the Mechanical Properties and Microstructure of Homogenized AZ80 Magnesium Alloy
Characterization of Products from Pyrolysis of Waste Wood-Based Composites Containing Urea-Formaldehyde Resins
Study on the Elastic Properties of the Woven Fabric Liner of Spherical Plain Bearing with Self-Lubricating
Early Fatigue Damage of Magnesium Alloy On-Line Monitoring by Nonlinear Ultrasonic
Influence Analysis of Multifactor on LCF Damage of Single Crystal Nickel-Based Superalloy under Multiaxial Non-Proportional Loading
Experimental Research of Prestrain Effects on Mechanical Behavior of Dual Phase Steel
Research for Transverse Tension Distribution on Steel Strip in Continuous-Annealing Furnace Based on ANSYS
Reflection and Refraction of Longitudinal Displacement Wave at Interface between Two Micropolar Elastic Solid
Laser Brazing Diamond Grinding Wheel with Ni-Base Filler Alloy
Organically Modified MCM-Type Material Preparation and Its Usage in Controlled Ibuprofen Delivery
The Refinement Effect of Al-Ti-C-RE Master Alloy Prepared by Adding Ce2O3 on Pure Al
The Influence of Boron on Structure and Mechanical Properties of Bainite Ductile Iron in the Step Austempering in Room Temperature Machine Oil
Research on Electroplastic Drawing Technology and Equipment
Microstructure and Property of Rapid-Solidified Al-Si Alloys by Solution Treatment
Preparation of Railway Concrete Sleeper Blended with Perlite Admixture
Pore Size Distribution and the Fatigue Properties of Several Cast Aluminum Alloys
Study on the Fiber Distribution and Fiber Orientation in Low Pressure Sheet Molding Compounds
Transformation Behavior During Continuous Cooling of Mn-Mo-Nb-B Microalloyed Steel
Prediction of Flow Stress of Stainless Steel 0Cr13Mn by RBF Neural Network
WC-Co Tool Failure Analysis and the Grinding Effect Study
Anti-Wear and Friction-Reducing Characteristics of Two Kinds of Ceramic Additives
Study on Filling Capacity of Semi-Solid Magnesium Alloy
On Isotropic Damage Distributions and Evolutions of HRR Field
Quantitative Analysis and Research of Cement Powder Mixing Based on Image Processing
Research on Characteristics of Deposition Precipitation Process in Production of Low Carbon Aluminum-Killed Steel in FTSR Technology
Comparison of the Electrochemical Behaviors Among 5083/6082 Friction Stir Welding Dissimilar Weld and Parent Materials
Study on Method to Dissected Data of Wood Cell Image
Study on the Ballistic Performance of Ceramic Composite Armor with Different Adhesive
Accelerating Corrosion Test Study on Galvanized Q345 Steel
Corrosion Parameters Distribution Rule and Influence Factors of LY12CZ Aluminum Alloy
Study on the Quality of TA2 Sheet in Laser Bending Deforming Area
Predicting the Wearable Property of YT 715 Cemented Carbide Cutting Tool
Dry Sliding Wear Behavior of Sintered Copper-Diamond Composite Fabricated by Powder Metallurgy
Theoretical Analysis on the Bond-Slip Constitutive Relationship between FRP Bars and Concrete under High Temperature
Study on Improving Cutting Tools Lifespan of W6Mo5Cr4V2 High-Speed Steel
Effect of Alkali Treatment of Coir Fiber on Its Morphology and Performance of the Fiber/LLDPE Bio-Composites
Microstructures and Mechanical Properties of Weld Joint between B610CF and 16MnR Steel
Creep Based Prediction Model of Stress Relaxation Behavior for High Temperature Materials
Research on Contact Fatigue Properties of Some Materials Used for Heavy Load Gear
CHAPTER 4: Coatings and Surface Engineering
Finite Element Simulation of Laser Cladding Layer Crack by Micro-Regulation Forging
Finite Element Analysis of Thermal Stress in Multi-Arc Ion Plated ZrTiN Hard Coatings
A Damage Cohesive Model for Simulating 90 degrees Peel Propagation in Anisotropic Conducive Adhesive Bonding
Corrosion Resistance of Brush Plated Pb/Ni Multilayer Coatings in a Simulated Environment of PEMFC
Effect of Ultrasonic Impact Strengthening Treating on Microstructure and Properties of AZ91D Magnesium Alloy
Analysis and Calculation of Electrodeposition Process of Zn Alloy Coatings
Surface Modification by Electrical Discharge Machining of Sintered NdFeB Magnet
Study on the Green Remanufacturing of Ultrasonic Vibration Aided Hot-Dip Aluminizing and Micro Arc Oxidation
Microstructure and Wear Resistance of the Composite Coatings Fabricated on Titanium Alloys by Laser Cladding
Effect of Current Density on the Microstructure and Mechanical Properties of TiN/TiAlN Duplex Coating Deposited on SKH51 Steel
The Investigation of Hot-Dip Aluminum and Micro-Arc Oxidation Multilayer Coating on 080A15 Steel
Investigation of Deposition Mechanism and Characteristics of Electroless Sn Plating
Study on Tribology Performance and Wear Controlling of 9Cr2Mo Steel
Liquid Film Performance Analysis of the Mechanical Seals with a Laser-Textured Micro-Pore Face
Microstructure and Properties of Laser Cladding Stellite 12/TiC/CaF2 Composite Coating on Copper Substrate
Experiment and Simulation of Laser Shock Processing on Fatigue Crack Growth of TC4 Alloy
Effect of Laser Shock Processing on Fatigue Performance of 7075-T651 Aluminum Alloy
Investigation on RE Ion Nitro-Carbonizing Technology Used for 4Cr5MoSiVl Casting Mold
Friction and Wear Properties of Ti-6Al-4V Surface Modified by Nitriding-Mo Plating-Sulfurizing Composite Treatment
Study on the Combined Anticorrosion Method of Thermal Spraying and Coating of Carbon Steel in Deposit Water of Storage Tank
Study on Fretting Wear Behavior of 40CrNiMoA Steel
The Influences of Anticipated Heat Treatment on the Electroless Nickel Plating on Magnesium Alloys
Numerical Analysis of Thermal Residual Stress in Diamond Film Deposited on Molybdenum Substrate
Preparation and Process Optimization of Ni-Tl-B Coating with Fretting Damage Resistance
Research on Nano-Coating Absorption Application in Laser Processing
Effect of Rare Earth on Microstructure and Properties of the Self-Propagating Spraying Coating
Camouflage Coatings Design and Optimization of Construction Machinery
CHAPTER 5: Materials Forming
Inline Rolling of 5182 Aluminum Alloy Strip Cast by a Vertical Type High Speed Twin Roll Caster
Roll Casting of Al-SiCp Composite Strip
Compaction Experiment on the Newly Designed Warm High Velocity Compaction Equipment
Numerical Simulation of Forming Force in Tube Multi-Point Forming
Glass Forming Ability and Non-Isothermal Crystallization Kinetics of Zr64Al10.1Cu11.7Ni14.2 Metallic Glass
Corrosion Behavior of Cu60Zr30Ti10 Amorphous Alloy
Experimental Research on Strain Distribution Characteristics of Thin-Walled Rectangular Tube in Rotary-Draw Bending
Study on Pressurizing Velocity and Model of Vacuum Counter-Pressure Filling Process
Application of Ductile Fracture Criterion in Hot Forging Damage of Mn18Cr18N Steel
Hot Deformation Behavior of 316LN Stainless Steel
Deformation Behaviors of AZ31B Magnesium Alloy Sheets in Hydraulic Deep Drawing
Study on the Technological Adaptability of the Reclaimed Sand Applied in the Chemical Bonded Sand
Effect of Different Processing on Properties of Silica Sand
Study on Accuracy Improvement of Vehicle Crash Simulation Considering Stamping Effects
Experimental Study on Influencing Factors to Drive Line of Box-Shaped Part with Curved Bottom
Optimization by Grey Relational Analysis of EDM Parameters on Machining Ti-6Al-4V
Hot Deformation Behavior during the Hot Compression of AZ31 Alloy
Numerical Simulation of Back Pressure Influenced Aluminum Component's HPDC Process
The Shape Distortions Formed in Flat Bottom Punch Raising Process with TC2M?1.53 Titanium Alloy Sheet
Properties and CA4GE-Engine Test of TiAl-Based Alloy Valves by Permanent Mold Casting
Research on the Blank Used in Integral Forming of a Lager Head with Supporting Table
Experimental Research on Impact Line of Hyperboloid Shallow Shell
Crush Performance of Top-Hat Tubular Structures Considering Different Forming Conditions
Application of Numerical Simulation on Cast-Steel Axle's V-Method Foundry
Research and Prospects of Laser Welding Technologies of Magnesium Alloys
Gap Setting Model and Application in Plate Rolling Process
The Research for Drawing Process of High-Speed Railway's Track Template
Prediction of Springback in Metal Forming of Diaphragm of Automotive Horn Based on BPANN
Role of Material Properties in Improving Sheet Formability in SPIF Process
Thermal Deformation Behavior of 1Cr12Ni3Mo2VNbN Alloy and Its Application in the Blade Forging
Effects of Steel Coatings Microstructure on Weldability in Resistance Spot Welding of Galvannealed Steel Sheets
Finite Element Simulation for the Stress of Cavity Die Wall in Tube Open-Die Cold Extrusion Process
Study on Formability of Tailor-Welded Blank Based on Sheet Metal Matching
Study on the Casting Process of the Large-Scale High-Chromium Cast Iron Impeller
Three-Dimensional Numerical Simulation and Forming Investigation for Net-Shape Forging of Spur Gears
Numerical Simulation of Multi-Component Powder in Selective Laser Sintering
CHAPTER 6: Novel Material Fabrication
On Cutting Process of Stainless Steel Fiber with Complex Surface Morphology
Numerical Simulation and Sensitivity Analysis for Tube Hydropiercing Quality Based on Experiments
Equation of Equilibrium Moisture Content of Wood under Vacuum by Regression Analysis
Preparation and Properties of Low Formaldehyde Emission Plywood with Flame Resistance
Study on Fractal Characteristics of Primary Phase Morphology in Semi-Solid A356 Alloy
Research on Semi-Solid Y112 Alloy Fabricated by Mechanical Stirring
The High Temperature Gel Permeation Chromatography Study on Poly (Phenylene Sulfide) Linear Chain Propagation
Influence of Duty Cycle on Composition and Microstructure of Siliconized Layer Using Pulse Electrodeposition
Effects of N Content on Microstructure and Properties of SAF2906 Casting Super Duplex Stainless Steel after Cryogenic Treatment
Effect of Ultrasonic Treatment on Microstructures of Mg-Ca Binary Alloy
Machining Process of Titanium Alloy Based on Green Cooling and Lubricating Technology
Internal Oxidation of Rare Earth Additive Accelerating Aluminized Layer on Copper Matrix
A New Spectral Analysis Technique Used in Converter Steelmaking BOF Endpoint Control
Research on Effect of La on Microstructure in Semi-Solid A356 Alloy
Study on Influences of Injection Process Parameters on the Mechanical Properties of the Modified Polypropylene Products with Weld Lines
Experimental Research on Deep Cryogenic Treatment Process of YT30 Cemented Carbide Inserts
Preparation and Application of Modified Soybean Protein Adhesives
The Study on a New Wood-Based Carrier of Controlle and Release of Fertilizer
Implementation of Distributed Control for Smelting Furnace and Mixed Gas Processes
Modification Microstructures in In Situ Mg2Si Reinforced Al-Si Alloy Composites
Research on Preparation of Topological Type PMMA by Atom Transfer Radical Polymerization
CHAPTER 7: High-Speed/Precision Machining
Tool-Swinging Cutting of Binderless Tungsten Carbide
Optimization of Thermal Performance of Hybrid Journal Bearings for High Speed Machine Tool Spindle with Small Diameter
Automatic Polishing Technology on Free Surface by Grinding Center
Research on Adiabatic Shear during Serrated Chip Formation of High Speed Turning of Hardened Steel
Effect of Cutting Conditions on the Stability Lobes for End Milling Process
A New Type of Servo Direct Drive Turret Punch Press
351nm Excimer Large-Area Lithography by Scanning and Projection
A New Method for Temperature Measurement to Determine the Temperature Variation in Cylindrical Grinding Contact Arc
The Simulation of Cutting Force and Temperature in High-Speed Milling of Ti-6Al-4V
Research on Overhanging Rigidity and Auxiliary Support Characteristics of the Large and Exact NC Rotary Table
The Technology Research of CO2 Laser Micropore Drilling on Carbon Steel
Experimental Study on the Relationship between Surface Roughness and Cutting Parameters when Face Milling High Strength Steel
Micro-Positioning Platform Based on Giant Magentostrictive Material
Study on Dynamic Design Technique of Machine Tools Structure Based on Energy Balance
Optimal Design and Process Analysis of the Blade for High-Speed Shearing Stainless Steel Tube
The Influencing Factors on the Axial Magnetic Field Distribution Characteristics of GMA
Machinability Investigation in High Speed Turning of Powder Metallurgy Nickel-Based Superalloy with Sialon Ceramic Inserts
Study on Technology of Drilling Superfine Deep-Hole in 2Cr13
Design Principle's Research of Traction Gear's Modification Slotting Cutter of High-Speed Locomotive
The Design of DF-Windspout Separator Cleaner
The Key Technology of Hob Design for Hobbing Screw Compressor Rotors with Cycloid-Arc Profile
Milling Force Forecast of the Matching of Lengthened Shrink-Fit Holder and Cutter in High Speed Machining
Preliminary Study on Deep-Hole Drilling Gamma Titanium Aluminide
Influence of Cutting Speed on Cutting Force in High-Speed Milling
Performance Comparison of Aerostatic Gas Bearings of Two Different Gas Supply Modes
Evolution of Surface Roughness of Ti Plate in Abrasive and Abrasive-Less Polishing
Building of Ultrasonic Vibration Precision Cutting System and Experimental Study of Cutting for Plastic Material
Design and Research of Amplitude Transformer in Ultrasonic Vibration Drilling System
Optimization of Ultrasonic Honing Acoustic Subsystem
Investigation of Cooling-Air Grinding Performance by Finite Element Analysis and Experiments
Adaptive Integral-Type Sliding Mode Control for Magnetic Levitation Linear Guide Suspension Altitude
CHAPTER 8: Bionic Mechanisms and Bio-Manufacturing
The Morphological Characteristics and Composition of Body Surface of Ant and its Relation to Reducing Soil Adherence
Fluctuation of Biped Walking Mechanism Based on a New Two-Level Type Half-Rotating Mechanism
Influence of Contractive and Dilative Motion of Blood Vessel to Robot
Surface Structure Research and Design of Drum's Coating Layer Based on Bionic Tribology
Simulation for Needle Deflection and Soft Tissue Deformation in Needle Insertion
CHAPTER 9: Modeling, Analysis and Simulation of Manufacturing Processes
Meshless TL and UL Approaches for Large Deformation Analysis
Simulation Research of the Condenser in a 600MW Supercritical Thermal Power Plant
Fast Deformation of Skeletal Muscle Using Constraint Functions
Modeling of V-Shape Linear Ultrasonic Motor Based on Hammerstein Model
Flow Analysis of Spray Jet and Direct Jet Nozzle for Fire Water Monitor
Analysis of Cutting Forces in Helical Ball-End Milling Based on Coordinate Conversion
Analytical Modeling of Residual Stresses in Burnishing
Dynamic Analysis of Ball Vibration Assisted Burnishing
Genetic Optimal Design of Straw Crusher Based on ADAMS
A Nonlinear Dynamics Bond Graph Model of Gear Transmission
The Finite Element Analysis and Optimization of Micro Free Piston Swing Engine's Strain Interference
Modeling and Analysis of Main Drive Train in a Power-Driven Turret
Velocity and Load Characteristics Analysis of Pump-Control-Motor Hydraulic Drive System
Integrate and Optimized Design of a Hydraulic Underwater Manipulator
A Desktop Virtual Reality-Based Interactive Tunnel Boring Machine Simulation System
Simulations of Thermal Behaviors on a Power-Driven Turret
The Changing Law of Tooth Bending Stress for Herringbone Gears with High Contact Ratio
Research of Deformation Process Control of Generator's Retaining Rings on Hydraulic Bulging Strengthening Technology
Thermal Equilibrium Analysis of Loaders' High-Pressure Hydraulic System
Numerical Coupling Analysis of Droplets' Behaviors in GMAW
Effect of Adhesive Layer's Voids on Stress Distribution of Adhesively Bonded Joints
Forecasting and Parameters Optimization of Reflow Soldering Profile Based on BPNN and GA
Dynamic Analysis and Experiment Validation of Linear Motion Guide Having Rolling Elements for NC Machine Tool
Dynamic Multibody Simulation of a 6-DOF Robotic Arm
Reliability Study for Creep Life of Single Crystal Turbine Blade under Random Crystal Orientations and Random Loads
Development of Hydraulic Control Jam Release Device for Workover
Computer Simulation for the Orthogonal Milling Process of Asphalt Concrete
A Study on Design of a Breech Mechanism Test-Platform Drive
The Ontology Mapping Technology Based on the Information Coding Ontology Model
The Flow Analysis of Automotive Power Steering Gear Assembly Based on Fluent
Analytical Comparison of Structures of Heavy Gas Turbine Rotor's Support
3-D Numerical Simulation and Experiment Study on the Wear of Piston Ring-Cylinder Liner
Study of Pressure Pulsations Attenuation in Hydraulic System
A New Method for Process Plan Reasoning in Injection Mould Repairs
Numerical Simulation of the Flow Field in Cavitations Nozzle for Impinging Streams Reactor
The Simulation about Collision of the Truck Fence
Modeling and Kinematics Characteristic Analysis of Twist Beam Rear Suspension Using ADAMS/Car
Reliability Simulation and Prediction of Mechanical Equipment for Maintenance
Design of Y422 Retrievable Fracture Bridge Plug and Analysis of Slip Characteristics
Optimization Design of the Composite Hub Connection Structure Based on ANSYS Software Technology
A Framework Based on Support Vector Regression for Robust Optimization
Finite Element Method Analysis and Optimal Design of Roller Convexity of Tapered Roller Bearing
Revision of Tooth Surface in Order to Compensate the Load Deviation of the Plastic Gears
FEM Simulation on Cold Rolling of Outer Spherical Bearing Ring
Study of the Geometrical Error Modeling of NC Lathe Based on Multi-Body System Theory
The Dynamic Simulation Analysis of the Vehicle Safety Belt Retractor
Mechanics Model and Finite Element Simulation of High Speed Orthogonal Cutting of Titanium Alloy
CHAPTER 10: CAD/CAM/CNC
The Study on Framework and Functions of Integrated Design Environments for Preliminary Design
Integration of 3D-Routing for the Design of Molded Interconnect Devices
CAD/CAE Technology and its Application on Nonferrous Alloy Casting
Integrated CAD/CAM Software for Steel Tubular Truss Structures
Design and Study of Heavy Tipper Multistage Hydraulic Cylinder Based on CAD/CAE
A Variant Design Method of Assembly
Research on Variant Design Method of Dimensional Tolerance Based on Parametric Technology
Study on Logistics-Oriented Product Innovative Design
Research on Method of Knowledge Classification for Supporting Product Creative Design
Knowledge Support Technology of Creative Design for Electromechanical Products
Tooth Contact Analysis of Face Gear Drive Modified by a Grinding Worm
Sphere Image Representation of Triangular Mesh and its Application
Determination of Multiple Clamping Forces Using the Rigid Body Model
Information Extraction Method for a STEP-Compliant NC Program
Applying Element-Free Galerkin Method to Simulate Die Forging Problems
Development of Three-Dimensional Parametric Modeling for Milling Process Simulation
Study on Key Technologies of Practical DNC System
Algorithm Study on Orientation Planes Identifying Based on KBE of Gear-Box Parts
Multiobjective Optimization Using Fitness Function and Sequence Approximate Technology
Optimization Design for Planet Carrier of Planetary Gear Reducer Based on ANSYS
Numerical Simulation of Cold Heading and Extruding for Spiral Bevel Gear
Elliptical Gears Parametric Design and Motion Simulation
The Research on Part Information Model of Injection Mold CAD/CAPP
Study on Cutter Trace Calculation and Interference Checking for Complex Surfaces NC Machining
Visual Design System Development of Wellhead's High Pressure Valve
Vibration Analysis of Ball Screw Drive System for CNC Machine Tool
Automatic Planning Approach of Auxiliary Clamping Points of Rapid Fixture in Thin-Walled Parts
Automatic Programming System for Machining Center On-Line Inspection
Basic Research on Five-Axis NC Machining of Subdivision Surface
CAD-CAM Prosthesis in Maxillo-Facial Surgery
Methods of Cam Structure Optimization Based on Behavioral Modeling
Fatigue Analysis of a Self-Propelled Steel Bridge for Life-Customized Design
Research on Solving Method for Tooth Crest Curve of Spiral Bevel Gear under Form Milling
A New Method for Deformation of B-Spline Surfaces
A Study on the Technology of Helical Groove Formation
An Automatic NC Programming System for Mould-Electrode Based on PowerMill
Cutting Parameters Optimization to Reduce Errors in Milling Mould
Automatic Design Method of Wind Turbine Tower and it's Application
A Design-Analysis and Simulation Approach of Ball-End Cutter Based on OpenGL
Dynamic Analysis on the Rotating Band's Engraving Process
A Comprehensive Tolerancing System for 3D Mechanical Assemblies
Data Integration of CAD, CAE with CAM for Composite Structures
CAD/CAM of Clothing Laser Cutting
Study on Process of Particle Impact on Curved Surface of Vane by Finite Element Method
The Optimal Design of Multi-Level Planetary Gear Reducer
A Method of Three-Dimensional Modeling Based on Voxel Code
A Nonlinear Mathematical Model for Turning Parameter Optimization Based on Minimum Production Cost
An Algorithm for Generating Multi-Axis NC Machining Tool-Path on Scattered Point Cloud
Principal Curvatures and Cutter Location Calculation of Six-Axis CNC Abrasive Belt Grinding Machine
CHAPTER 11: Virtual Manufacturing and Concurrent Engineering
Research on a Platform for Developing Virtual Prototype of Automatic Transmission
Key Technologies of the Customization Product CAD/CAE Integrated Analysis System
Extending Activity Overlapping Model Based on Design Structure Matrix
Semantic SOA for Missile Design
Research on the Relationship between Virtual Manufacturing and Digital Factory
A Haptic-Based Approach for Cable Design and Routing in Industrial Complex Products
Integration of Multi-View Data Based on Auxiliary Reference Plane
CHAPTER 12: Green Design and Manufacturing
Improvement of Vehicle Crashworthiness for Full Frontal Impact Based on Energy Flow Analysis
Study on a New Method of Cleaner Process Design and its Application
An Efficient IT Energy-Saving Approach Based on Cloud Computing for Networked Green Manufacturing
Experimental Study on the Applicability of Minimum Quantity Lubricant Grinding
Tube Bus Corona Optimal Design of HVDC Converter Substation
The CBR-Based Green Design Evaluation System for Mechanical Products
Rolling-Plowing-Extrusion of Outside 3D Integral Fins on the Stainless Steel Tube
Application of Multidisciplinary Design Optimization Based on Approximation Model to Marine Supercharger Turbo
Bend-Twist Coupling Design and Evaluation of Spar Cap of Wind Turbine Compliance Blade
Weight Reduction Design of Gear Drive Based on Parameter and Structural Optimization
Optimum Design on Screw Parameters of the Twin Screw Pulping Extruder Based on the Extrusion Model
Green Scheduling and its Solution
Polymerization Craft of Wood-PSt Composite and its Performance
Laser Remanufacturing Technology and its Applications
Research on Multi-Step Active Disassembly Method of Products Based on ADSM
Numerical Analysis for Thermal Performance of High Power Multi-Chip LED Packaging
Application of Reverse Engineering Technology in the Green Remanufacture Engineering
A New LCA Method Based on Multi-Scenarios Coexistence
CHAPTER 13: Digital and Agile Manufacturing
Human-Computer Collaborative Service Composition for Service-Oriented Manufacturing Integrated Systems
Research on the Measurement Method of Flexibility of Resource Service Composition in Cloud Manufacturing
Research on Case-Base in Semantic SOA Integrated System
A New Data Reduction Algorithm with Preserved Features
On the Topology Optimization Design for the Stereolithography Based Investment Casting Model
Acquisition and Analysis for Customer Requirement Information
A Discrete Part Oriented Collaborative Manufacturing Service Platform Based on Agent and Grid
Determining Structural Modes of HSK Tool System Based on FEM and EMA
A Method for Problem Selection in the 6? Definition Stage
An Apriori-Based Knowledge Mining Method for Product Configuration Design
Tolerance Analysis for Compliant Assemblies with Thickness Deviation
Study on a Development Platform of Virtual Steam Jet Pump Based on Virtual Prototyping Technology
Simulation Modeling Based on the Object-Oriented for Camshaft Production Line
Simulation and Optimization of the Camshaft Production Line Based on Petri Net
A Study on Incremental Forming of Vertical Wall Square Box with Small Radius Corner
The Effect of Forming Half-Apex Angle on Incremental Sheet Metal Forming
Research on the Security of BPEL Based Manufacturing Service Workflow Management System
Case Retrieval for Product Configuration Based on NRS and KNN
Branch and Bound Method with Heuristic Algorithm for a Special Flexible Flow Shop Scheduling Problem
Conversion of Information Flow in Digital Manufacturing for Clothing Industry
Product Module Partition Method for Product Lifecycle Based on LSSVC
Study on Ontology-Based Knowledge Integration
CHAPTER 14: Nano Fabrication and MEMS
A Method Study on Assembly of Single-Wall Carbon Nanotube Field Effect Transistor Using Dielectrophoresis
Interface between Nanophotonics and Biotechnology: How the Near-Field Can Boost Proteomics Based on LSPR Nano Sensor
Nanoimprint Lithography: A Promising Candidate for Next-Generation Lithography
Realization of Mass Production of Microlens Array by Hot Embossing on Silicon Substrate
The Design and Testing of Mesopiezoresistive Effect Electromagnetic Driven Micromachined Gyroscope
Research on Multi-Domain Unified Modeling and Simulation of a Micro Electro-Thermal Actuator
A MEMS-Based PDMS Micropump Utilizing Electromagnetic Actuation and Planar In-Contact Check Valves
Analysis of a Curved Beam MEMS Piezoelectric Vibration Energy Harvester
Design of MEMS High g Accelerometer and Study on the Overload Ability
CHAPTER 15: Mechatronics
Position Predictive Measurement Method for Time Grating CNC Rotary Table
Study on the Engine Start/Stop Control Strategy of Hybrid Vehicles
Design and Analysis of Automatic Cutting Robot for Vertical-Pull Glass Pipe
A System with Dynamic Reactive Power Compensating for High Power Windings Rotor Induction Motor
Research on Drive Control Method of Scanning Mechanism of Radar Scatterometer Antenna
Fuzzy Control of Non-Cable Type Autonomous Dredging Robot for Municipal Drainage Pipe
Application Research of FlexRay Communication Protocol in Engineering Vehicle
A New Energy Recycle Test Bench for Hydraulic Winches
Study Control System Based on Creep Test in High Density Baler
Research on Static Stiffness Characteristics of Parallel Machine Tool
A New Kind of Pumping Rod Appliance
CHAPTER 16: PDM, ERP, Logistics and Supply Chain
ERP Implementation Challenges in Small and Medium Enterprise: A Framework and Case Study
Benchmarking Implementation and Cluster Approach in Manufacturing SMEs: A Review
A Component Based Reconfigurable Scheduling System for Semiconductor Manufacturing
Business Process Integration of Mold Making Enterprise Based on BPM
Analysis of Customization Cost Structural Model Based on Supply Chain
A Key Parameters Analysis Method of the Quality Control in the Semiconductor Multiple Manufacturing Processes Based on Functional Data Analysis Method
A Three-Fold Approach to Solve Dynamic Job Shop Scheduling Problems by Artificial Immune Algorithm
Commercial Recommended Services Research Based on ASP
Information Management of Data Resources in Product Design and Manufacture Process
Solving Steel-Making and Continuous-Casting Scheduling Problem with Fuzzy Processing and Delivery Time Using Genetic Algorithm
Solving Flow Shop Scheduling Problem Considering Waiting Time Using Genetic Algorithm
The Advanced Production Planning of Automated Scheduling Problems in Irradiation Industry
CHAPTER 17: Intelligent Controllers
Constraint Projection Adaptive Natural Gradient Online Algorithm for SVM
Analysis of Heat Exchanger Performance Forecast Based on the BP Neural Network
Friction Compensation Based Acceleration Feedback Control for Flight Simulator
Robust BackStepping Control Based DRNN for Flight Simulator
Global Asymptotic Stability of Stochastic Fuzzy Cellular Neural Networks with Time-Varying Delays
A Compression Algorithm for Vibration Signal of Rotating Machinery Based on Partitioned Iterated Function Systems
Study on Trajectory Planning and Control Method in Profile Cutting of Roadheader
A Study on Gray Relational Analysis of Many Factor Weights in Tobacco Leaves Classification
A Novel Distributed Multi Agent System Plan Algorithm
Design and Realization of the SMT Product Character Recognition System
The Expert System of Prediction of Stroke for Precision Straightening Based on Database
Error Modeling and Compensation of Linear Motors Positioning Stage Based on RBF Network
The Electro-Hydraulic Proportional Control and Simulation of the Radial Piston Pump Based on Proportional-Integral-Derivative Neural Network
The Assemblability Evaluation of Automotive Glass Windshield Mold Based on Fuzzy Neural Network
The Study and Design of UAV Dynamic Inversion Flight Control Law
Reinforcement Learning Based Self-Constructing Fuzzy Neural Network Controller for AC Motor Drives
Modeling of Piezoelectric Plate and Control Test
Application of Self-Adaptive Fuzzy PID Algorithm in the Control of the Oscillating-Plate Necking-In Machine Based on the Co-Simulation of DSHplus and Simulink
A New Genetic Algorithm Based on Optimal Solution Orientation
Rotor Speed Adaptive Identification of Direct Torque Control for Induction Motor
The Improvement of Real-Time Performance of 3-Tier C/S Using LAD Scheduling Algorithm in Middleware
Intelligent Wheelchair System Based on Collaborative Kansei Engineering
The Study of Soccer Robot Path Planning Based on Grid-Based Potential Field Method Improvements
Study on Mathematical Modeling Method for Photoelectric Stable Platform
CHAPTER 18: Industrial Automation and Process Control
Precision Construction in Japan - Utilization of Information and Communication Technology
Design of Frequency Control System for Centrifuge in Multi-Parameter Combined Environmental Testing Device
The Modeling of Steam Turbine Speed Control System Based on Radial Basis Function Neural Network
Modeling and Stability Analysis of Multi-Rate Networked Control Systems with Multiple Control Loops
Development and Application of Capacitor Compensation AC De-Icing Equipment
Design and Experimental Study of a Novel Fault Current Limiter
A Modified Quality Control Method for Manufacturing Process in Mask Industry
Online Learning Algorithm of Gaussian Process Based on Adaptive Natural Gradient for Regression
High Speed Weld Control System of Dual-Bypass MIG Based on LabVIEW
The Working Mechanism and Control Method of GL160C Metal Belt CVT
Average Run Lengths in Shewhart Type Charts for 2-Order Autoregressive Process
Prediction and Control for Profile Angle Error of Slotting Cutter of Herringbone Gear in Turbine Redactor
Research and Development of the 5-Axis Shoe Last NC Machine
Air Compressor Testing System Based on the HMI Software
Research on PONC Calculation Method in Manufacturing Process Based on Working Procedure
Nonlinear Self-Adaptive Compensation of Screw down System of Tandem Cold Mill
A Flatness Control System Design Based on Actuator Efficiency Factors for Cold Rolling Mill
Study on the Turret Feeding Servo System of Precision CNC Lathe
Study on Process Control Method of Kiln Outlet in Cement Production
Simulation of Closed-Loop Control of the Landing Position of the Water Jet out from Water Fire Monitors
Application of On-Line Detecting Harmful Substances in Flue Gas in Safety Assessment and Harmfulness Forecast
Position and Attitude Control of Remote Ultrasonic Scanner Based on Sliding Mode Approach
Development of Sheet Material Stamping Automatic Feeding and Pick-Up Device
The Cascade Three-Elements Fuzzy Auto-Adapted PID Control System for Boiler
Application Study of Variable Parameters PID Dynamic Tension Control in Cold Rolling Mill
CVT Ratio Adjusting Process Control
Application of LQR Techniques to the Anti-Sway Controller of Overhead Crane
Effect of Welding Sequence on Deposition Geometry Control in GMAW Remanufacturing
Study on Steady Condition Control of Hybrid Turbocharging System
Application of Single Neuron PID Control Based on Variable Scale Algorithm in Tar-Ammonia Separation
Study on the Wood-Based Hydrogel and its pH-Sensitivity
A New Simulation System of Programmable Logic Controller
The Application and Development of Automatic Tool Selection in Tool Magazine Based on PLC
CHAPTER 19: Virtual Instrumentation in Automation
Research on Weak Signal Amplification Principle Based on Parabola Map
The Design of the Measuring and Controlling System of the High Power Pump Performance Test-Bed Based on Virtual Instrument Technique
Modeling of Test Resource Based on Multi-Agent and its Application in Intelligent Virtual Instrument
CHAPTER 20: Advanced Measurement and Machine Vision System
Study on the Technologies of Rapid Three-Dimension Optical Measurement for Spatial Tubular Joints Deformation
3-D Shape Measurement Based on Optic Interferometric Projection
Modeling and Analysis for Sound Field of Rectangular Small Enclosure under the Excitation of Panel Loudspeaker by Using FEM
Characteristic Recognition of IC Chip's Micro-Topography Defects Based on Image Projection Transformation and Energy Optimization Modeling
Positioning of Characteristic Points in IC Chip's Micro-Topography Based on Cross Correlation Matching and Image Projection Transformation
Research on Crack Generating in the Process of Hybrid Plasma and Laser Deposition Manufacturing
A Gait Recognition Algorithm Based on Wavelet Moment and Double Triangle Feature
A New Grating Non-Diffracting Structured Light for Three Dimensional Shape Measurement
Research on the Splitting Measurement Method of Space Position in Three-Dimensional Field
Research on Image Segmentation Technique for Pebrine in Silkworm Based on HSI Model
Application Research of Face Feature Extraction Based on DM642
Traditional Chinese Medicine Pulse-Condition Simulation and Wavelet Recognition Method
A New Flatness Evaluation-Rotation Method Based on GA
Design of Poultry Meat Edible Quality Detection Device Using Multiple Image Sensors
Low-Cost Optical Measurement for Micro-Displacement with High Accuracy
Stereo Matching Algorithm Based on Phase Dynamic Programming in 3D Profile Measurement
Skeleton-Based Feature Extraction Method for Two-Dimensional Potential Energy
The Study of the Relationship between the Helix and the Individual Error in Gear Hob Measurements
Visual Technique for Detecting Weld Position Based on Hough Transformation
Uncertainty Estimation in Straightness Mini-Zone Verification Based on Improved GPS Standard System
Machine Vision System for Inspecting Surgical Blades
A Novel Method of Wire Detection Combined PCNN with HT
A Fast and Precise Measuring Method for Large Workpiece Based on Machine Vision
Application of Machine Vision Technique in Plate Camber Control System
Measurement Method for the Symmetry Error of Double Keyway in a Wheel Hub Bore
Research of Welding Deformation Measurement Based on Visual Method
Design of Remote Calibration System Oriented to Multiple Objects and Complex Requirements
Comparative Research on Contact and Non-Contact Measuring Methods of 3D Twisted Blades in a Torque Converter
A Novel Method of Sub-Pixel Linear Edge Detection Based on First Derivative Approach
Application of Image Processing in Quality Detection of PS Plate
Research on Adaptive Denoising Method for Surface Roughness Measuring
CHAPTER 21: Industrial Robots and Automation
The Research and Simulation of Trajectory Generation Method for Tractor-Trailer Mobile Robot
Matlab-Based Embedded Controller Design for Robot
A New Blind Source Separation Algorithm in Application of Over-Determined Mode under Lower SNR
Integrated CAD Software with ERP Interface for Steel Portal Frames
Servomotor Parameter Estimation of a 2-DOF Translations and Full Rotation Parallel Mechanism
Study of Dry Wire Electrical Discharge Grinding
A Multi-Sensory Robot Used for Searching Toxic Gas Leak Source
An Improved Spectral Subtraction Algorithm Study Based on Voice Human-Computer Interaction in Cockpit
Overall Design of High Pressure Isolation Plug Train
A Robot Calibration Method Based on Virtual Closed Kinematic Chain
A Four Degrees of Freedom Parallel Manipulator for Machining
Vibration Analysis of New Type Pipeline-Cleaning Robot
New Plane/Space Thermal Cutting Robot Workstation System
Research on the System for Coal Mine Disasters Prevention Based on Modularization Heterogeneous Multi-Robot
The Trajectory Optimization of Spray Painting Robot for Conical Surface
The Pig Tracking System Based on AVR Microcontroller and GPS/GSM
Research on Machine Vision in Forestry Pluck System
Research on 2-Dof Parallel Robot and its Motion Characteristics
CHAPTER 22: Distributed Control System
Research on Multi-Parameter Measure and Control Technology Based on Wireless Communication in Combined Environment Testing
Realization of WSN Location Monitoring Terminal System Operation Strategy
Implementation of CANopen Distributed Control Network Based on ARM in Automatic Production Line
De-Synchronization of the Distributed Refrigeration System
Study on Sample Rate and Performance of a Networked Control System by Simulation
CHAPTER 23: Embedded System
Design of a New Frequency Converting Electromagnetic Water Treatment Control System
Design of Embedded Numerical Control Platform for Carton Samplemaker
The Application of Embedding Operating System at the High-Precision Temperature Calibration Device
Design of Pure Electric Vehicles' Drive Motor Controller Based on dsPIC
Method of Judging the Energy Measurement Device Error Wiring Based on Checking Tables
A Monitoring System for Residential Quarter Security Based on Wireless Sensor Network
CHAPTER 24: Sensors for Automation
Optimization Design of a Piezoelectric Transduction Silicon Resonant Pressure Sensor
Fabrication of Ethanol Sensor Based on a Calixarene Derivative Coated Piezoelectric Quartz Crystal
Attitude Estimation Algorithm of Optronics Mast Systems (OMS) Based on Fuzzy Weighted Method
Structural Optimization for Direct-Decoupling Planar Capacitive Sensor
Design of Embedded Greenhouse Monitoring & Control System Based on WSN
A Kind of Linear Array CCD Drive Frequency Regulation Technology
Development and Fabrication of the Micro Eddy Current Sensor by Using UV-LIGA Process
The Research of the Ultrasonic Heat Meter Adopting a Through Structure
Development of Cylinder with Multiple Diagonal Slits for Ultrasonic Longitudinal - Torsional Vibration Turn-Milling
Research on Metro Vehicle Vibration with Regard to Route Conditions
Design of DSP Video Image Processing System Control Software
Modal Analysis of a Six-Axis Accelerometer
CHAPTER 25: Vibration System and Analysis (Random Vibration, Flow Induced Vibration)
Vibration Localization Analysis of Bladed Disk with Grouped Blades
Dynamic Propagation of Mode III: Crack Concerning Surfaces Subjected to Variable Moving Concentrated Loads
Study on Effect of Surface Friction on the Dynamic Behaviours of Cylindrical Gear Transmission
Harmonic Response Analyses of Three Knife-Shape-Tooth Star-Wheel Loading Mechanism
Analysis and Comparison of Contact Forces between the Constrained Tongs and the Under-Constrained Tongs
Vibration Analysis of Composite Plate Embedded with SMA Fibers
Research of Adaptive Vibration Control with Piezoelectric Materials
Analysis of Piezoelectric Power Harvesting with Composite Energy Converter in Thermal Environments
Dynamic Analysis of the Sucker-Rod Pumping System of Deviated Well Based on LuGre Friction Model
Effect of Contact Interface on Ultrasonic Characteristic of Wire Bond Transducer
Research on Fault Diagnosis of Ship Stern Bearing Based on Vibration Analysis
Modal Test and Finite Element Analysis of Sand Blender's Agitator
Modal Analysis of Ring-Plate of Double Crank Four Ring-Plate-Type Cycloid Reducer
Research on the Vibration of Drilling Derrick
Dynamic Analysis of Grinding Wheel Mechanism on Large Vertical Glass Edging Machine
Study on the Influence of the Damping to Nonlinear Vibration Caused by Pair Clearance
Subharmonic Resonance Analysis of a 2-DOF Controllable Linkage Mechanism System Affected by Self-Excited Inertial Force
Numerical Simulation of a Self-Decoupling Magneto-Rheological Damper on Electromagnetic-Thermal Coupling
The Dynamics Analysis of Metamorphic Mechanisms Based on Fully Cartesian Coordinates Method
The Study on Harmonic Vibration of Drill String in Horizontal Well
A Two-Stage Optimization Approach for Structural Dynamic Design of Mechanical Systems
Dynamic Response of a New Railway Emergency Steel Truss Girder under the Moving Train Loads
Research on the Impact of AGC Vibration on the Horizontal Vibration of the Roll System for CSP Rolling Mill
Dynamic Characteristics of Planetary Gearbox of Shield Tunnelling Machine
Optimum Design of Compound-Axis Servo System
Dynamic Simulation and Experimental Modal Analysis of Large Vibratory Feeder
Dynamics Analysis for Periodically Forced Oscillation System
Fracture Cause Analysis and Improvement on Waveguide Tube of Satellite Calibration Antenna in Random Vibration
Dynamic Reliability Evaluation of Pressure Pulsation for Hydraulic Power Pipelines
A Method of Dynamic Modeling of a Large Floating Crane and its External Excitations
CHAPTER 26:Vibration Measurements and Controls
Experimental and FEM Modal Analysis of Workbench for PCB Drilling Machine
Vibration Analysis and Control in Amorphous Alloy Dry-Type Transformer Core
Supports' Dynamical Optimized Design for the External Pipeline of Aircraft Engine
Research on Output Characteristics of Piezoelectric Accelerometers for Low-Frequency Vibration
Study on Vibration Signal Marginal Spectrum of Paper-Transferring System in Printing Press Based on EMD
Study on Effect of Rotor Vibration on Tip Clearance Variation and Fast Active Control of Tip Clearance
Testing and Error Analysis of some Structure's Impact Load
Study on the Application of Metal Rubber Isolator in Compressor Base
Fast Steady Horizon Sensor Based on Filtering Vibration
An Experimental Study on Selection Method of Vari-Speed Milling Parameters
Active Vibration Suppression Control Algorithm in Gyroscopic System
Performance Analysis of Large Radial Equal-Thickness Vibratory Feeder
CHAPTER 27: Condition Monitoring and Fault Diagnosis
Analysis of Flexural and Torsional Vibration for Turbogenerator Shafts on Power Impact
Feature Analysis of Mechanical Fault Signals Based on the Wavelet Transform Technique
Fault Diagnosis of Rotating Machinery Based on FDR Feature Selection Algorithm and SVM
Study of Concrete Pump Truck Structural Health Monitoring
Inner Leakage Fault Diagnosis of Hydraulic Cylinder Using Wavelet Energy
Tool Condition Monitoring Based on Radial Basis Probabilistic Neural Networks and Improved Genetic Algorithm
Study on Screw Pairs Life Prediction Based on Hidden Markov Model and Neural Networks
Fault Diagnosis of Nuclear Power Equipment Based on HMM-SVM and Database Development
Dynamic Interpretation Method of XML Configuration Strategy for IP Mode Measurement and Control System
Investigation on the Modeling of Rotor Axial Displacement Fault Diagnosis and Prognosis for Centrifugal Compressor
Study of On-Line Condition Monitoring System for Roller Based on HMM
Research and Application on Chlorophyll Fluorescence On-Line Monitoring Technology
De-Noising of Damage Signal in Wire Rope Based on Adaptive Lifting Wavelet
Steam Turbine Blade MMM Testing and Failure Analysis
The Remote Monitor for Smart Motion Device by Using VPN Technology
Rolling Bearing Fault Diagnosis Based on AIS
Curvature Mode Characteristics of the Simple Beam with a Local Damaged Crack
One Method to Determine the Optimal Maintenance Time Based on Selective Attrition
A Method of Simulating Computation for the Fatigue Life Prediction
Engineering Machinery Engine System Reliability Analysis
Study on the Method of Multi-Rope Hoist Rope Tension Imbalance Fault Monitoring and Diagnosis
Monitoring of Drilling Tool Condition through Spindle Current
Supervised Locally Linear Embedding for Fault Diagnosis
Research on Rotating Machinery Vibration Fault Based on Support Vector Machine
Visualization Design Technology of Hydraulic System in the Fault Diagnosis Research and Application
The Study on Piezoelectric Impedance Technique Used in Loading Damage Identification
Fault Diagnosis for Stiction of Pneumatic Control Valve
CHAPTER 28: Vehicle Dynamics
A New Method for Estimating Road Friction Coefficient
Study on Integration Control of Air Suspension and ABS
Feasibility Study on Active Control of Hydraulic Electromagnetic Energy-Regenerative Absorber
Evaluation of Energy-Regenerative Suspension Structure Based on Fuzzy Comprehensive Judgment (FCJ)
Modeling and Simulation of Motorcycle Ride Comfort Based on Bump Road
Study on Impacting Characteristics of a Metro Vehicle
Dynamic Study on Vehicle Hydro-Pneumatic Suspension
The Dynamics Simulation of Braking Process on Automobile Disc Brake
CHAPTER 29: Rotor Dynamics
Effect of Manufacturing Tolerances on Stiffness and Damping of Hydrodynamic Journal Bearings
Stability Margin of Quasi-Periodic Motion in Nonlinear Rotor System: Experimental Validation
Study on Dynamic Model and Characteristic of Internal Parallel Moving Gears Transmission
Simulation of Crack Dynamic Characteristics of Rotor Based on FEM Analysis
Numerical Analysis of Agitated Flow Field of Submersible Mixer
CHAPTER 30: Other Related Topics
Strategy Research on Rapid Design of Complex Product Based on Case Reuse Technology
Test Analysis of Friction Moment between Ball and Cage of Miniature Bearing at Very Low Speed
Desert Road Hypothesis: No Subgrade Kevlar Fiber Surface Road
The Candidate Enterprise Selection on Extended Evaluation Theory
A New Method for Inspecting Crack of Concrete Bridges Using Image Processing Technique
Frictional Characteristics of Tool and Material in Turning Particulate Reinforced Iron-Based Composites
The Stability Control to the Mechanical Properties of High-Pressure Gas Cylinder Industrial Production by Using Stability Indicators
Design and Test on a New Pattern Friction Damper
The Improvement and Optimization Design of the BF-Type Flexible Drive