Advanced Engineering Materials

Sponsors, Committees and Preface
1. Iron and Steel
Simulation Research on the Penetration Phenomenon of Long Rod Armour-Piercing Projectile with Different Materials
Adsorption Behavior of Sulfamethoxazole as Inhibitor for Mild Steel in 3%HCl Solution
Precipitates and Lueders Elongation in Ferritic Stainless Steels Stabilized with Ti and V
The Analysis of Temperature Field and Residual Stress Distribution during H-Beam Cooling Process
Research of a Novel Low-Carbon High-Manganese Alloy Containing Boron
Effects of Mn on the Precipitation Behaviors in High-Nitrogen Austenitic Stainless Steels
Fractal Analysis of Raceway Boundary in COREX Melter Gasifier Model
Corrosion Inhibition of 45# Mild Steel in Acidic Solution by Some Norfloxacin
Microstructures and Textures During Annealing in Low Carbon Al-Killed Steels with Low Finishing Temperatures and High Coiling Temperatures
Numerical Simulation for Direct Reduction of Pure Zinc Oxide Pellet Containing Carbon
A New Evaluation Index of Coke High Temperature Properties - Starting Reaction Temperature
Effect of High Magnetic Field on Diffusion Behavior of Carbon in Pure Iron
Synthesis Pathway of Dioxins in Iron Ore Sintering Process
Effect of Magnetic Field Direction on Texture Evolution in Cold-Rolled IF Steel Sheet at the Initial Stage of Recrystallization
Atomistic Model of Amorphous Silicon Nitride by Melt-Quench Method
Study on the Recrystallization Behaviour of Hot Deformed Austenite in GCr15 Bearing Steel
Microstructure and Properties of 65Mn Steel after Austenite Inverse Phase Transformation by Sub-Temperature Quenching
A Study on Microstructure of Ductile Ni-Resist Cast Iron for Exhaust Manifolds and Mechanical Property at the Condition of Altermative Thermal Cycles
Preparation of Fe-Cu-Ni-Mo-C Alloy with High Performance by Powder Metallurgy Warm Compaction
Crack Research for Welded Joint of Steel Truss Bridge
Synthesis and Dielectric Properties of Ba(Ti,Y)O3 Solid Solutions to Ba3Ti2YO8.5-BaTiO3 Composites
Hypereutectic Al-Si-Mg In Situ Composite Prepared by Melt Superheating
The Study of Low-Velocity Impact Characteristics and Residual Tensile Strength of Carbon Fiber Composite Lattice Core Sandwich Structures
Simulation of Microstructure and Grain Size in Welding Heat Affected Zone Using Monte Carlo Method
Microstructure and Mechanical Properties of Hot-Rolled Low-Carbon Medium-Manganese TRIP Steels
Synergistic Inhibition Effect of Sodium Silicte and Phytic Acid for Carbon Steel in Neutral Salt Water
Precipation and Dissolution Behaviours of Secondary Phase in J55 Steel During Continuous Casting, Conveying and Heating
The Influence of Enamel Firing Process on Microstructure and Mechanical Properties of Steel Substrate
Characteristics of Hot Ductility and Fracture in Micro-Alloyed Q345B Structural Steel
Electrochemical and Quantum Chemical Investigations of Tinidazole as Corrosion Inhibitor for Mild Steel in 3% HCl Solution
Effect of Quenching Temperature on Microstructures and Mechanical Properties of Boron-Nickel-Added Nb-Treated HSLA H-Beams
Melting Temperature of a Selected Area in CaO-MgO-Al2O3-SiO2 Slag System
Effects of Temperature and Strain Rate on Thermal Deformation-Behaviour of Cu-P Weathering Steel
Experiment Research on Argon Shroud for the Protection of Steel Casting
Study on Thermal Physical and Chemical Properties of Sodium Pyroxenite in Baiyunebo Iron Ore
Effects of Impact Angles on Erosion-Abrasion Properties of Hypereutectic Al-Mn Alloy Matrix Composite Reinforced with Al2O3 Particulates
Study on Heavy Section Forging Steel for Reactor Pressure Vessel Applying Simulation Methods
Effects of Compound Silicate Gangue on Mineral Composition and Microstructure of Sinter Produced by Baiyunebo Iron Ore Concentrates
Studies on Technological Parameters of Optimal Soft Reduction about Superwide Slab Caster
Effect of Nitrogen on Mechanical Properties of 20MnSi at High Temperature
Structure Evolution in Steel Wires During Drawing
A Novel Characteristic Method on Fatigue Crack Growth of N80 Casing Drilling Steel
Study on the Durable Factors of the Grain Size in 18CrNiMo7-6 by Heating and Cooling Method
Aluminizing Mechanism and Corrosion Resistance of Pipeline Steel X80 by Combined Pack Cementation Process under Low Temperature
Effects of Rare Earths on Structural Transformation of Heavy Rail Steel
Development of Texture and Grain Boundary Character in a Boron Bearing IF Steel after Recrystallization Annealing
Discussion on Burden Calculation of Ferromanganese Alloy Production
Effect of Heat Imput on Microstructure and Toughness of High Strength Bridge Steel
Study on Ultrasonic Test Defects Causes of Medium Plate
Research on the Impact Toughness of Basalt Fiber Reinforced Composites
Study on Characteristics of Ultrasonic Fields by Hydraulic Model of Ladle Refining
Study on Effects of Pretreatment on Carbide of a Medium-Alloy High Carbon Steel
The Comparison of Electrolysis Manganese Craft on Stainless Steel and Titanium
The Influence of Basalt Fiber Orientation on the Mechanical Property of Composite Board
Effect of Mold Flux for Casting on Microstructe of Mould Powder
Study on the Cooling Process of Low Yield Ratio 590-780MPa Grade Steel Plates for High-Rise Buildings
Effect of Divorced Eutectoid Transformation Temperature on Behaviour of Cementite Growth in GCr15 Steel
Cold Model Study of Raceway in COREX Melter Gasifier
Behaviours of Zinc and Lead in Blast Furnace of Baotou Iron and Steel Group Co.
Tensile Strength Statistical Analysis of B610CF Steel
Evolution of Microstructure and Oxidation Layer of 430 Stainless Steel During Hot Rolling
Effect of Heat Treatment on the Structure and Mechanical Properties of the Hot-Rolling Plate of Fe-42% Ni (4J42)
Study of the Coefficient of Thermal Expansion for Steel Q235
Study of Bake Hardenability for Hot Rolling Low Carbon Steel
Effect of Ultrasonic Treatment Time on Inclusions in High Carbon Steel
Effects of Applied Compressive Stress on Microstructure and Mechanical Properties of Cr-Mo Steel During Continuous Cooling Bainitic Transformation
A Study on Flow Characteristics of Coherent Jet Oxygen Injector
Investigation on Friction and Wear Property of Al2O3-Sio2(Sf) / AZ91D Composite
Investigation on Aging Behaviour of Al2O3-Sio2(Sf) / AZ91D Composites
A New Idea for Improving Heat Fade Performance of Organic Based Friction Materials
Wear Behaviour of Thermal Spray Welded FeNi and CeO2 Composite Coatings
Effect of Static Magnetic Field on Distribution of Elements in the Fe-S, Fe-Si, and Fe-Mn Alloys
Effect of Pulsed Electric Field on the Distribution and Migration of P, S, and Si Elements of Fe-Based Alloys
The Effect of Hot-Rolled Coiling Time on the Texture of a New Cold-Rolled Non-Oriented Electric Steel
2. Micro / Nano Materials
Physicochemical, Gel Structure and Morphology Properties of Nano Rice Starch Prepared by Ultrasound
Facile Preparation of Nanoporous SnO2 for Application in Photodegradation of Methylene Blue
Preparation of PS@SiO2, PS@TiO2?PS@TiO2/SiO2 Core-Shell Composites by a Spray Drying Process and Their Hollow Spheres after Removing PS Cores by Calcinations
Combined Manufacturing Process of Electrochemical-Etching and Electroplating on Nanoporous Silicon for its Metallization
Synthesis of Gold Nano- and Microplates by Tryptophan and 5-Hydroxy-Tryptophan
Influence of Temperature for Synthesis of Carbon Nanofibers from the V-Type Pyrolysis Flame
Characterization of Protein Powder from Waste Rabbit Hair
Corrosion Behaviour of AISI 304 Austenitic Stainless Steel Fabricated by Equal-Channel Angular Pressing
Controllable Assembly of Au Nanorods through Recognition of h-IgG and Anti-h-lgG Fab
Magnesium-Based Hydrogen-Storage Materials from Milling for Sulfocompound Hydrodesulfurization
Fabrication of Ti2AlN by Mechanical Alloying and Hot Press Sintering
Electrochemical Synthesis for Uniform and Large-Scale Zinc Oxide Nano Structure Films
Study on the Spread of the Energy Gap in Nanostructure System
Carbon Nanotubes with Uniform Wall Thickness Synthesized Via a Solid-Liquid Reaction
Synthesis, Characterization and Gas Adsorption of Titania Nanotubes
Preparation of Nano-Powders of ITO
Research on Ultrafine PTFE Particles with Grease Tribological Properties
Synthesis of Nanocrystalline TiC1-xNx by High Energy Milling
Researching on the Adsorption of Protein on Gold Nanoparticles
The Lattice Change of Ni-P Layer Coated on Single-Walled Carbon Nanotubes
The Acoustic Insulation Property of a New Non-Woven Material
Fabrication and Characterization of Nanocrystalline NiO Prepared by Sol-Gel Process
Rapid Fabrication of Cu-Al2O3 Nanocomposition Coatings
Preparation and Characterization of Cassava Starch-Chitosan/Montmorillonite Nanocomposites
Absorption of Eriochrome Blue Black on Polyaniline/Attapulgite Nanocomposites
Synthesis of Type-A Zeolite in Hydrothermal Condition with Stellerite
Synthesis and Characterization of Titanate Nanotubes and Nanowires in a Revolving Autoclave
Large-Scale Patterning and Assembly of Carbon Nanotubes by Microfluidic Hydrodynamic Focusing
Engineering of Soybean Extract Powder: Identification, Characterisation and Stability Evaluation
Preparation, Characterization of Nanoscale Zero-Valent Iron and its Application in Coking Wastewater Treatment
Fabrication of the SnO2/Al2O3 Catalysts through Electrospinning
Electromagnetic Characteristics and Microwave Absorption Properties of CNT Composite
Influences of Nd3+ Ions Substitution on the Structure and Electromagnetic Properties of the Nanocrystalline Co0.5Zn0.5Fe2O4 Ferrite
Ni-Al2O3 Nanocomposites Electroforming Process under Ultrasonic and Agitation
Study the Relative Permeability of Ferrofluid with the Mean Value Analysis of Experimental Apparent Gravity
Effect of Edge Activator on Characteristic and in Vitro Skin Permeation of Meloxicam Loaded in Elastic Liposomes
Development of Chitosan Nanoparticles for Gene Delivery Using Electrohydrodynamic Spraying Techniques
PbSe Nanocrystals Synthesized by an Ultrasonic Electrochemical Method
A Hollow Microneedle Carrier for Enhancing Skin Penetration of Large Molecular Compounds
Corrosion Behaviour of Ultra-Fine Grain Chromium Bronze Prepared by Equal-Channel Angular Pressing in Nacl Solution
Preparation and Characterisation of TAM-PLGA Microspheres by Solvent Evaporation
Synthesis of High Surface Area Porous Silicon Carbide by a Modified Sol-Gel Method
Self-Supporting Honeycomb Films of Polyphenylene Oxide Fabrication and Characterization
Investigation of Nano-Powders Made by Spark Discharging Reaction
Sputtering Phenomena of ZnS Nanoparticles with Graphite Sheaths by Impacting of High-Energy Electron in a Transmission Electron Microscope
Study on Design for Remanufacturing Facing Total Remanufacturing Process
Preparation Principle and Crystal Growth Kinetics of Loaded Nanocrystal TiO2
Synthesis and Field Emission of ZnO Bundles with High Aspect Ratio by Solution Method
Carbon Nanotube Templated Growth of the Nano-Crystalline NaY Zeolite
Fabrication of Large-Area Silicon Nanowire Arrays Based on Electroless Metal Deposition
Technological Properties of Poplar Particle/Waste Rubber Powder Composites
Effect of Additive on Microstructure and Property of Bulk Nanocrystalline Co-Ni Alloys Prepared by JED
Coagulation Method for Preparing Antimony-Doped Tin Oxide (ATO)/Poly(methyl Methacrylate) Nanocomposites and their Electrical Conductivity and Thermal Stability
Preparation and Photoluminescence Properties of Tadpole-Like Amorphous Silica Nanowires
Optical Studies on Multiwalled Carbon Nanotubes via Modified Wolff-Kishner Reduction Process
Preparation of Coral-Like ?-Fe2O3 Nanostructures and Magnetic Properties
Effects of Solution Parameters on Morphology and Diameter of Electrospun Polystyrene Nanofibers
One-Step Wet Synthesis and Characterisation of Hydrophobic Magnesium Hydroxide
Facile Fabrication of Single Crystalline Fe3O4 Nanorods and its Magnetic Properties
Preparation of Composite Conductive Microspheres Used in Anisotropic Conductive Adhesive Films
Fabrication and Characterization of Chitosan-Ethylenediaminetetraacetic Acid/Polyvinyl Alcohol Blend Electrospun Nanofibers
Preparation of Nicob/SiO2 Nanoalloy Catalysts and their Catalytic Hydrogenation Performance
Influence of Sintering Temperature on Densification and Microstructure of Zn3Nb2O8 Ceramics Derived from Nanopowders
Rapid Preparation of V2O3 and VN Nanocrystals by Ammonolysis of the Precursor VOC2O4*H2O
Appropriate Conditions for Preparation of Nanosized WO3 through High-Energy-Milling
The Tribological Properties of PA6/UHMPE Blended Short Carbon Fiber Nanoclay Filled Nanocomposites
Analysis the Structure Parameters of the SOI Rib Waveguide
Spin Polarized Transport through Structures Consist of the Ferromagnetic Semiconductor in Presence of a Inhomogeneous Magnetic Field
Surfactants-Controlled Morphosynthesis of Strontium Carbonate
Preparation of ZnO Nano-Suspension and its Antibacterial Effect on Escherichia Coli
Hydrothermal Preparation and Formation Mechanism of ZnSn(OH)6 Cubic Aggregates and Zn2SnO4 Octahedra
Effects of Process Conditions on Properties of Nano-Magnetic Fluid
Synthesis and Characterization of Pyrochlore Lead Zinc Niobate Nanopowders Derived from Zn3Nb2O8 Precursor
Synthesis, Characterization and Optical Properties of a Novel Piperazine Derivative Microcrystal
Microstructure and Microhardness of Copper Subjected to High Pressure Torsion
Study on Pore Structure and Sulfur Fixation Characteristics of Alkali Industrial Waste
Thermo-Responsive Dispersion of Multi-Walled Carbon Nanotubes Modified with Poly(N-Isopropylacrylamide-Co-Acrylic Acid)
Spunbonded Nonwovens Made from Segmented Pie Filaments
Fabrication of Flake-Shaped Core-Shell Micro Particles by Way of Thermal Decomposition of Pentacarbonyl Iron on Diatomite Surface
Synthesis and Antioxidant Activity of Resin of Chitosan Cerium Encapsulated Green Tea Extract Microspheres
Fabrication of Micro-Silicon Filter and Separating of Blood Cells
Carbon Nanolines Grown on Carbon Cloth Prepared by a Two-Step Method
Synthesis of Nano-Strontium Titanate Immobilised on the Silica Gel G and its Application in Removal of Heavy Metal Ions from Water
Synthesis and Characterisation of Bicone-Shaped and Monodispersed Nanoparticles of Cu2S
Research on Cement Pulverized Admixture of Waste Concrete Powder
Preparation of Porous Nano-Strontium Titanate and its Application in Removal of Heavy Metals from Environmental Water
A Facile Method for Fabrication Zinc Oxide Nanoparticles with Green-Photoluminescence
Preparation and Characterization of Thermo-Sensitive Hydroxypropylmethyl Cellulose/Poly (N-Isopropylacrylamide) Hydrogel
Dihexadecyl Phosphate-Assisted Synthesis of Unusual Calcium Carbonate Microspherules
Characterization of Well-Dispersed CeO2 Nanoparticles Prepared by a New Method of Reverse Microemulsion
Hydrothermal Synthesis and Characterization of Novel MoS2 Nanoflowers Directed by Ionic Liquid
The Effect of Biology Activity on WS during Anaerobic Digestion
Solvothermal Synthesis of Cd1-xZnxS (x = 0-1) Nanorods Using Single-Source Molecular Precursors
Leaching Behaviour of Heavy Metals from the Class C Fly Ash-Based Geopolymers
Effects of Bentonite Clarificants on Organic Acids Contents in Red Wine during Clarification
3. Building Materials
Performance Tests of Surface Burning for Firestop Materials
Preparation and Charcterisation of PSt/GMA/DVB Microspheres by Soap-Free Emulsion Polymerization
Petal-Like Morphology on the Surface of Porous Anodic Alumina
Influence of Fly Ash on Crack Resistance of Mass Concrete
Application of an Anisotropic Material of Thermal Conductivity in Building Envelope
The Concrete Structure Strengthen Technology and Engineering Application
A New Fatigue Strength Measuring Method of Steel Bar in Concrete
Study of Rubber Asphalt Modification Mechanism
State of the Art of Constitutive Model of Concrete Materials Based on Damage Mechanics
Setting Behaviour of Phosphate Cement
Experimental Investigation into the Impact of Polypropylene Fibers and SRA on the Early Crack Resistance of Concrete
The Application of Carbon Fiber Reinforcement in Tunnel Second Lining Cracks
The Analysis on the Mechanical Property and Durability of Carbon Fiber Reinforced Concrete

In Situ Observation Microstructure Character Changes in the Carbonation Process of Hardened Cement Paste Using ESEM/EDS
Synthesis and Characterisation of Tb4L3(Phen)0.75*7H2O Nanorods
The Function Study of TiO2 Catalysts on Zinc Air Battery
Electromagnetic Shielding Effectiveness of Cement Based Materials with Scrap Tires Wire - FeCuNbSiB Amorphous Alloy Powder
Slag-Clay Foam Cement as Roof Material for Passive Evaporative Cooling
Experimental Research on the Mechanical Parameters of Frozen Pipes under Low Temperature
Research on the Pore Structure of Alkali-Slag Cement Stone Activated with Water Glass
Influences of Environment Climate Conditions on Concrete Carbonation Rate
Study on the Hydraulic Conductivity of Sand-Bentonite mixtures used as Liner System of Waste Landfill
Numerical Simulation of The Drying Shrinkage Process of Concrete
The Frost Model of Concrete in the View of Damage Mechanics
Effect of Ground Phosphate Slag on the Resistance to Chloride Ion Penetration of Concrete
Simulation of Fracturing Process for Heterogeneous Material under Uniaxial Compression
A Study of Interfacial Transition Zone in Lightweight Aggregate Concrete
Effect of Fly Ash on the Workability of Nondispersible Underwater Concrete
Effect of Pore Structure of Sandstone on Hydrophilic Characteristicis
Photoinitiated Emulsion Polymerization of P(MMA-co-DVB) Microspheres with Low Power Ultraviolet Light
Study on Interfacial Properties of Ultra-High Performance Concrete Containing Steel Slag Powder and Fly Ash
Preparation and Characterisation of a Compatilizer of PP-RTV Blends
Carbon Sequestration Analysis of Wood Construction Architecture
3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete
Numerical Simulation of Temperature and Creep of Concrete Surrounding Spiral Case in a Hydraulic Plant
Material Test on Aluminum Alloy Round Pipe for Building Structure
The Experimental Study on Strength of Subgrade Soil Treated with Liquid Stabilizer
Comparative Study on Crack Width Prediction for Concrete Flexural Members with GFRP Reinforcement
Study on the Influence of Chloride Ion Content on Pavement Performance of Base Material with Fly-Ash-Flushed-By-Seawater
Microscopic Mechanism Study on Carbonation Resistance of Recycled Aggregate Concrete
Influence of Cement Particle Size Distribution on Strength of Cement Paste
Prognosis of Alkali Aggregate Reaction with SEM
A Study for Substituting Part of Raw Materials by Bottom Ash in Portland Cement
Properties of the Mortar Modified with the Styrene-Acrylic Emulsion
Study on Mechanical Properties of Soda Residue / Fly Ash Composite Cementitious Material
Experiments for Strength Properties of Polypropylene Fiber-Reinforced Concrete
Mechanism of Preferential Adsorption of Carboxylic-Vinyl Copolymer, Hydroxy Carboxylate and Sulfonation - Polyol in Cement Hydration Process
Triaxial Shrinkages Tests of Unsaturated Compacted Clay
Experimental Study on Relationship between Saturation Degree and Void Ratio of Remolded Soils on Drying Path
Experimental Investigation Properties on Resistance of Slag Cement Concrete to Sulfate Attack
Research on Mechanical Property of Single Panel Fire-Resistant Glass with Cs+ Ion and Rb+ Ion Exchange
Effects of Adhered Mortar Content on Quality of Recycled Coarse Aggregate of Concrete
Experimental Research on New Concrete Air Entraining Agent
Research on Application Technology of TLA Modified Asphalt Mixture
Mechanical Property of Solidified Concrete by Explosion as Concrete is in Flow Pattern
Preparation of Potato Starch Graft Copolymer and its Application in Functional Coatings
Research on Moisture Porosity Test of Explosive Lining Materials after Long-Term Water Immersion
Effect of Gypsum on Strength Development of Steam-Cured Concrete
Research on Performance of Cement Stabilized Skeleton-Dense Structure Aggregate Base Course Material
Mesoscopic Thermal-Mechanical Fire Damage Modeling of High Performance Concrete
SEM and XRD Investigation on Mechanism of Expansion and High-Early-Strength of a Cementitious Composited Grouting Material
Basalt Fiber Reinforced Concrete
Experimental Study on Dynamic Mechanical Behaviour of Concrete with High Temperature
Experimental Research on Performance of Anchorage of Planting Rebars with Inorganic Material in Concrete
Research Status and Prospects of the Smart Concrete
Preparation and Properties of New Polycarboxylate-Type Superplasticizer
Researches and Application of Railway Wind-Break Wall
Impact Strength Test and Numerical Fitting of Plybamboo Form
The Status and Development of New-Type Wall Material
The Study on the Properties of Super Absorbent Polymer in Expansive Concrete
Effect of Particle Size on Expansive Behaviour of MgO-Based Expansive Agent in Cement Paste
Experimental Study on the Bending Resistance Performance of GFRP Tube Filled with Steel-Reinforced High-Strength Concrete Flexural Component
Calculation of Flexural Capacity of SRC Beams Strengthened with CFRP
Reliability Research of RPC Low-Height T-Beam in Railway Bridge
Shear Lag in Thin-Walled Box Girder with Variable Section
Properties of Recycled-Cement Produced from Waste Concrete
Determination of Tensile Strength of Compacted Loess by Double Punch Test
4. Metal Alloy Materials
Enhancing the Toughness of Heavy Thick X80 Pipeline Steel Plates by Microstructure Control
Effect of Ultrasonic Power on the Microstructure and Hardness of Commercially Pure Aluminum
Recent Developments for Isochronal Transformation Kinetics Model and their Applications
The Kinetics of the Austenite-Ferrite Phase Transformation of Fe-4Cr Alloy during Continuous Cooling
Plastic Strain Energy in Low-Cycle Fatigue of A356 (Al-7Si-0.4Mg) Aluminum Alloys
Microstructures and Hardness of Silver Alloys after Internal Oxidation Process
Effects of Erbium Addition on the Corrosion Resistance and Microstructure of AZ91 Magnesium Alloy
Effect of Solution Treatment Temperature on Microstructure and Mechanical Properties of Cr20Ni32AlTi Alloy
Study on Interaction between Cerium and Arsenic
Flow Stress Behaviour of TWIP Steel during the Hot Compression Deformation
Discussion on Relationship between Viscosities of Molten Zr-Cu Based Alloys and their Glass Forming Ability
Forecast and Analysis of Transformation Point of TC6 Titanium Alloy
Effect of Cr and Zr Addition on the Corrosion Behaviour of Copper in the Chloride Solution
Effect of High Pressure Heat Treatment on Microstructure and Corrosion Resistance of Brass
The Influence of Deformation on Dechromization Corrosion of CuCr Alloy in H3PO4 Solutions
Effect of Element Re on Creep Behaviour of a Single Crystal Nickel-Based Superalloy
Microstructure and Properties of Cu-17Fe Alloy Aged Treatment in High Magnetic Field
Characterization of Precipitates in Bend-Age-Formed 2124 Aluminium Alloy
Effect of Composition and Temperature on the Formation of Delta Ferrite in the Billet for P92 Steel
Effect of Trace Boron on Microstructure and Mechanical Properties of Ti-9V-3Al-3Cr-3Zr-3.5Mo Alloy
Analysis of the Valence Electron Structures of the Strengthening Phases Al8Fe4Ce and Al4Ce in Al-Fe-Ce Alloy
Effect of Sr + RE Combination Modifier on Microstructure and Mechanical Properties of Al-40 Wt? Si Alloy
Microstructures and Properties of Cu-Cr-Y Alloy after Cold Worked and Aging
Hot Corrosion of Cobalt-Based Alloy with (Na, K)2SO4 Coating at 900 degreesC
Mechanism of the Flux Improving the Microstructure and Mechanical Properties of AZ91D Magnesium Alloy
Effect of Temperature on Recrystallisation Texture and Microstructure for Non-Oriented Silicon Steel under Asymmetrically Rolling Process16
Influence of Yttrium and Heat Treatment on Microstructure and Mechanical Properties of AM60 Alloy
Study on the Thermal Fatigue Resistance of Cr17Mn10Ni3 Heat-Resistant Steel
Numerical Simulation of Surface Hardened Layer of the Hydraulic Track
Effects of Two-Step Aging Temperature on Exfoliation Corrosion of an Al-Zn-Mg-Cu Alloy
The Influence of Thermomechanical Treatment on the Microstructure and Properties of a Wrought Al-Mg-Si Alloy
Effect of Ni on Characteristics and Structure of Aluminium Brass
Recrystallisation Behaviour of Cu-20Ni-5Sn Alloy
Characterization of ?' Precipitate Phase in Aged Mg-12Gd-2Y-0.5Sm-0.5Sb-0.5Zr Alloy
A Study on Corrosion of Cast-On-Strap Alloys
Displacement Based Seismic Design Method of RC Frame with Friction Dampers
Effect of Ca on Microstructure and Properties of Mg-Al-Si Alloys
Effects of Sb on Microstructure and Mechanical Properties of Mg-5.5Al-1.2Y Alloy
Solid Solution Strengthening of Sm in Mg-10Y-1.5Sm Alloy
5. Composites
Preparation and Characterisation of Al/Pb Layered Composite Materials
An Analytical Method for 3-Phase Model of Electro-Magneto-Elastic Fiber Composites with Periodically Distributed Reinforced Phases
Sensitivity Analysis of Static Response for Composite Laminated Plates in Hamilton System
Meshless Method with Radial Basis Functions for Hamilton Canonical Equation
Study on Manufacture Technology and Mechanical Properties of Three Dimensional Braided Composite Support with Irregular Shape
Thermomechanical Properties and Morphology of Liquid Crystalline Polyurethane/Epoxy Resin Composites
Recent Progress on Carbon Coated Lithium Titanate
Preparation and Characterisation of Konjac Glucomannan (KGM)/SiO2 Nanoparticles Blend Film
Effects of Particle Size and Volume Fraction on Extrusion Texture of SiCp/Al Metal Matrix Composites
Experimental Research and Regression Analysis for Constant Temperature Drying of Wheat Straw
Experimental Investigation on First Crack Strength and Crack Widthof Reinforced Concrete Beamsby Side-Bonding CFRP Sheets
The Stability Research of Montmorillonite/Octadecyl Trimethyl Ammonium Complexes
Preparation and Flame Resistance of Hydrotalcite/Epoxy Nanocomposites Containing Red Phosphorous
Pressureless Sintering and Properties Investigation of Silicon Nitride
Study on the Natural Fiber/pp Wrap Spun Yarns Reinforced Thermoplastic Composites
Effect Of PP-G-MAH on the Compatibility of Lignin/LDPE Composites
Study on the Characterisation and Photocatalysis Reactivity of TiO2/Cu Composite Particles
Manufacture and Testing of a Moderate Size Integrated Marine Composite Propeller
Study of the Structural Design and Capacitance Characteristics of Fabric Sensor
Separable K-Canonical Formulation of Rectangular Element and Symplectic Integration Method for Analysis of Laminated Plates
Rheology and Thermal Properties of Polypropylene/Poly(phenylene Sulfide) Microfibrillar Composites
Preparation and Characterisation of Polyaniline Grafted Multiwalled Carbon Nanotubes/Epoxy Composite
Thermodynamics on Formation of Condensed Phases during CVD Si3N4 Process with Sicl4-NH3-H2 Precursors
The Effects of Particle Size-Matching Filling of Spherical Silica on the Flowability of Epoxy Molding Compounds for Large-Scale Integrated Circuits Packaging
Preparation and Characterisation of Wool-Keratin Films Based on SMS Nonwovens
Effects of Wood Powder on Mechanical Properties of PP/Wood Powder Composites
High Quality Al2O3-ZrO2-C Slide Gate Properties Adding Si-Fe Sintered by both Nitrogen and Carbon Monoxide Atmosphere
Study on High Performance Fe3Si-Si3N4-SiC Composite Preparation and its Application in Blast Furnace
Electrical Conductivity and Electromagnetic Interference Shielding Effectiveness of Multiwalled Carbon Nanotubes Filled ABS Composites
Application of Carbon Fiber Composite on Space Camera Frame
High Performance Si-Si3N4-Sic Sagger Composite Materials Preparation and its Attack Mechanism after Usage
Sliding Wear Behaviour of Cu-10Fe-3Ag In Situ Composite
Thermal Conductivity Polypropylene/Aluminium Nitride Composites
Progressive Damage Model of FRP Composite Laminates with Central Hole
Winding of High Performance Thermoplastic PPESK Composites Using on-Line Solution Impregnation and In Situ Consolidation
Structure and Properties Study of Porous Silicon Carbide Composite Based on SLA
Microstructure and Properties of La-Doped Ag-SnO2/Cu Contact Material
Microstructure and Compressive Behaviour of 3D Needled C/SiC Composites
Study on Electron Beam Curing of APTES Functionalized MWNTs/ Epoxy Composites
Effects of Stitching Reinforcement on Mechanics Behaviour of Composite ? Joint under Tensile Loading
Preliminary Research on Interfacial Evolution Behaviour of Ti-Cu Laminated Composite Materials
Effect of Carbon Fiber Felt Pretreatment on Properties of Carbon Fiber Paper
Random Response and Statistic Characteristics Analysis of Random Parameters Nonlinear Systems
Research on New Technology to Control Highway Semi-Rigid Base Asphalt Pavement Cracks
Effects of Cold Deformation on Microstructure and Mechanical Properties of Cu-0.35Al2O3(Y) Composite
Surface Analyses of High-Temperature Oxidized In Situ Synthesized Ti-40Al-2.0C Composites
The Study of Existential State of Protein in Protein/Montmorillonite Complexes
Preparation and Characterisation of Sulfonic Acid-Functionalized Carbon/Loess Composite
Study on the Orientation Angle of the Yarns in 3D Integrated Cellular Woven Structure
Antibacterial Property of Chinese fir/TiO2 Composite
Characterisation of Ti-Al and Ti-Cu Laminated Composite Electrode Materials
The Different Probabilistic Method for the Conservatism Analysis of Composite Structure Damage Tolerance Design
One-Step Synthesis of ZnS Nanocrystals with Graphite Sheaths from a Single-Source Precursor
Thermal Properties of the Aluminum Particle Reinforced Silicone Rubber Composites
The Addition of Acid Treated Carbon Nanotube on the Tribological Properties of Carbon Fiber Reinforced UHMWPE Composite
Investigation of Microstructure and Property of the Fe3Al/Al2O3 Composites Fabricated by Mechanical Alloying Process and Plasma Active Sintering Process
On the Improvement of Fiber Reinforced Concrete through Surface Modification of Polypropylene by Grafting Method
Interlaminar Fracture Toughness of Composite Laminate with Splicing Plies
Synthesis of B4C/Al-B4C/TiB2 Composite with a Two-Layer Structure
Preparation and Properties of Tapioca Starch-Banana Fiber Composites Modified with Magnesium Hydroxide
Seismic Reliability Analysis of MDOF Systems Based on Odd Exponent Wavelet
Fabrication Porous Si3N4 -Glass Composite by Combustion Synthesis
Microstructure and Mechanical Property of an ECAP Processed Al-Mg2Si In Situ Composite by Using a Combined Route
Improvement in the Thermal Shock Resistance of Zirconia Ceramic by the Addition of Aluminium Titanate
Mechanical and Tribological Properties of PTFE Composites Filled with POB
Effect of Sintering Temperature on Al2O3/TiAl Composite from Ti-Al-TiO2-Eu2O3 System
Microstructure and Mechanical Properties of Al2O3/Tial In Situ Composites Doped with Cr2O3
Tensile Property of the Flax/Polyester Composites after Water Treatment
Effect of Molar Ratio of Al2O3 to Fe2O3 on the Sintering and Thermal Shock Resistance of Al2O3-Fe2O3 Composite
Preparation and Characterisation of Polyborazine as Novel Precursor to Boron Nitride Ceramic
Effect of Sintering Temperatures on the Sintering Performance and Thermal Shock Resistance of MgO-Al2O3-Fe2O3 Composite
Properties Research of Cotton Fiber Reinforced Gypsum Based Composites
Research on Oxidation Reaction of AlN Powder
Microstructure and Mechanical Properties of High-Strength Graphite Particles Coated TiO2 Film Embedded in SiC Composite
Mechanical and Tribological Properties of Phenol Formaldehyde Resin Reinforced with Nano-Silica
Finite Element Analysis and Experimental Investigation of Carbon Fiber Composite Circular Tube
Research on the Flexural Behaviour of Reinforced Concrete Beams Strengthened with CFRP
Microstructure of In Situ Tic-Mo-Ni And Tic-WC-Mo-Ni Cermets Synthesized by Reactive Hot-Pressing Sintering
Microstructure Characterisation and Mechanical Behaviour of 2D C/SiC-C Composite with SiC/PyC Multilayer Matrix
Dynamic Effective Properties of Particle-Reinforced Composites with Imperfect Interface
Microstructure and Mechanical Properties of In Situ WC Particles Reinforced Iron-Based Composite Coating
Preparation and Characterisation of TiO2-Supported on the Surface of SiO2
Wood-Polymer Composite Prepared by Combined Two-Step Method and its Dimensional Stability
Chemical Modification of Poplar Wood on the Mechanical Properties
Influence of Hydrothermal Environment on the Composite Laminate Plate with a Hole
Three-Dimensional Effective Elastic Moduli for Multidirectional Filament-Wound Tube with Lining
Effects of Fe on Friction and Wear Properties of Cu-Based Friction Aterial
Study on Porous Structure and Surface Characteristics of Al-Pillared Montmorillonite
A Study of Ramie Fiber Reinforced Polypropylene Composites
Preparation and Performance Study of Carbon Fiber Reinforced ABS Modified Nylon Resin Base Composite Material
Characteristic of Raman Spectra, Crystal Structure and Superconductivity of Fe-Doped GdBa2Cu3-xFexO7-? Systems
Design of the Stitching Parameters Applied to the Laminates with Cut-Out
Experimental Study on the Axial Behaviour of Cold-Formed Thin-Walled Steel Framing Wall Studs
Experimental Study on Applying Bentonite for Mango Storage
Study on Preparation Technique of SiC/Cu-Al Composite by Pressureless Infiltration
A Study of Test for Polyethylene / Modified Montmorillonite Nanocomposites
In-Plane Anisotropic Mechanical Properties of Three-Dimensional Angle-Interlock Architectural Composites
6 Earthquake Resistant Structures, Materials and Design
Parametric Study of Hysteretic Behaviour of Combined Welded Heavy Steel Plates with Accumulative Damage
TRIZ and its Application in Industrial Design
Shear Strength Upgrade of Perforated RC Shearwalls Using Prestress and Steel Plate
Nonlinear Finite Element Analysis of Shearwalls with Various Types of Openings
Seismic Performance of CFRP Strengthened Unreinforced Masonry Structures
The Effect on Scattering of SH-Wave in a Layered Half-Space with the Subsurface Circular Cavities
The Dependence of the Corrosion Resistance of Ni-Cr-Mo-Cu Alloy to H2SO4 Solution on the 4Cr/ (2Mo+Cu)
Study on Properties of Foam Concrete Based on Fractal Theory
The Dependence of the Corrosion Resistance of Ni-Cr-Mo-Cu Alloy to HCL Solution on the 4Cr/ (2Mo+Cu)
Dynamic Analysis of Steel Tube and Concrete-Filled Steel Tube High-Limit Protection Racks under Impact Loads
Research on a New Type of Rolling Ball Isolator
Experimental Study of the Steel Type Buckling Restrained Braces
Analysis and Countermeasures on Seismic Damages of Gas Pipeline Network in Wenchuan Earthquake
Seismic Isolation Effect of a Tunnel Covered with Expanded Polystrene Geofoam
Seismic Damage Analysis on Water Supply System in Wenchuan Earthquake
A Comparative Study on Seismic Reinforcement Test of Beijing Rural Brick Building
Experimental Research on Seismic Behaviour of Low-Carbon Construction Materials RAC Frame Columns
Analysis for Seismic Response of Long Span Rigid Frame Bridge
Collision Analysis of Protection Frame for Height Limit and Over-High Trucks
Comprehensive Evaluation of Construction System on Steel Structure Housing
Research on the Application of Periodic Truss-Core Structures to Structural Design of Machine Tool
Finite Element Analysis of Air Cooler Used in Nuclear Power Station
Seismic Behaviour on Composite Strengthening for Existing Reinforced Concrete Short Columns
Modal Comparison and Bridge-Type Optimization of Light-Rail Box Girder Bridges
Research on Semi-Active Control of Large-Scale Aqueduct
Comparative Study on the Pseudo-Dynamic Testing of Semi-Rigid Connection of Steel Frames with or without Brace
A New Seismic-Isolation Device Applied in Continuous Beam Bridge
The Seismic Behaviour of the Materials Used in the Steel-Plate Shear Walls with Concrete Filled Steel Tube Columns
Dynamic Responses of RC Underground Subway Station and Soil during the Strong Earthquake
7. Tooling Testing and Evaluation of Materials
The Evaluation of Organic Coating with Artificial Defect Degradation with EIS Measurement: Phase Angle at High Frequencies
The Micro-Mechanism Analysis on Rock Creep Damage
Dynamic Fracture Toughness Test and Evaluation for S135 Drill Pipe
Effect of Salt in Aqueous Solution on the Swelling and Water-Retention Capacity of Bentonite
Surface Characterisation of the Corundum-Route Lead Magnesium Niobate Ferroelectric Ceramics
The Photocatalytic Characteristics of TiO2 Films: an Expeditious Evaluation
Applying Ultrasonic Testing to Detect Hole Defect Near the Surface
8. Waste Engineering and Management
Treatment and Disposal of Municipal Sewage Sludge and it's Resources Utilization as Construction Material
The Physical and Chemical Properties of Fly Ash fom Municipal Solid Wastes Incineration
A Review on the Treatments and Minimization Techniques of Stainless Steel Pickling Sludge
A Study on the Continuous Manufacturing Technique of A-Gypsum
Experimental Study of Glass Ceramics from Liquid Hematite Slag
Study of Fluorgypsum Modification
Using Thermal Analysis Studying Reaction Process of Forsterite with Iron Ore Tailings
Study on Clean Treatment of Urea-Formaldehyde Waste Using Fast Pyrolysis
The Microstructure and Properties of Restored WCP/Fe-C Composites
Recycling and Characterisation of Amorphous Silica from Zr-Containing Silica Residue
Gallium and Arsenic Recovery from Waste Gallium Arsenide by Wet Refined Methods
Hydration Characteristics and Cementious Properties of Pyrolytic Steel Slag
Research on Kitchen Waste Disposal Equipment and Technology
Effect of Brown Corundum Dust Powder on the Sintering Performance of Corundum-Silicon Nitride Castable
The Preparation of High-Strength and Micropore Lightweight Bauxite Aggregate by In Situ Polymerization and Decomposition
Mineral Sequestration of CO2 Using Basic Oxygen Furnace (BOF) Steelmaking Slag
Thermodynamic Analysis on Separation Process of Iron and Niobium for Iron Tailings Containing Niobium
Effect of Microwave-Treatment Power on the Properties of Activated Carbons as Electrode Materials for Supercapacitors
Shrimp Waste Fermentation Using Symbiotic Lactic Acid Bacteria
Preparation and Characterisation of Amorphous Silica from Alkali Wastewater Produced in Manufacturing Process of ZrOCl2
Study on Desulfurization and Denitration of with Industry Solid Waste by Microwave
Thermodynamics of Slag Formation in Multi-Component Oxide Systems in Thermal Processing of Incineration Bottom Ash - Equilibrium Phase Relation in CaO-SiO2-FeOx-MgO System

In Situ Synthesis of ?-Sialon Powder from Fly Ash
A New Interior Plywood Adhesive Based on Oil -Tea Cake
Study on the Hydrolysis of Corn Stalk and Photosynthetic Bacteria Group Fermentation Hydrogen Production
9. Other Related Topics
Numerical Simulation of High Inner-Pressure Hydroforming of T-Branch Tube
The Die Design of Large Diameter Tee Multi-Pass Extrusion Process
Velocity Optimization on Squashing and Bending Process of Large Diameter Elbow
High Anticorrosion Nano Zn-Fe Coatings by Pulse Electrodepositing
Reverse Engineering Application in Automobile Parts Design
Molecular Dynamics Simulations of Structures of Amorphous Carbon Films via Deposition
?/? Phase Transformation in Porous Reaction-Bonded Silicon Nitride Ceramics
Analysis of Characteristic of Microstrip Signal Loss in Course of Signal Transmission
Structures and Properties of ZnO-Based Ceramic Films for Low-Voltage Varistors by the R.F. Magnetron Sputtering
Synthesis of Aluminium Diethylphosphinate by Gas-Liquid Free Radical Addition Reaction under Atmospheric Pressure
Comparative Study of GaN-Based LED Grown on Different Substrates
Influence of Dope Concentration on Morphology And Properties of Cellulose Hollow Fiber Membranes Prepared from Cellulose/[Amim]Cl Dope Solution
Study of Mg(Zr0.05Ti0.95)O3 Dielectric Thin Films by Sol-Gel Method
Fabrication of Ti-Doped ZnO Thin Films by Chemical Bath Deposition
Research on ZnS Buffer Layer by RF Magnetron Sputtering for Cu(In,Ga)Se2 Solar Cells
Preparation and Characterization of Radar Wave Absorbing CB/PP Fibers
Electromagnetic Properties of Polyaniline Co-Doped with CSA and Ni2+
Electrical and Optical Properties of Indium and Aluminium Doped Zinc Oxide Films Prepared by RF Magnetron Sputtering
Analysis of T-Peel Weld-Bonded Joint with Single Overlap Support
Effect of Aging Treatment on Microstructure and Wear Behaviour of a Nickel Based Hardfaced Coating
Surface Characteristics of Ni-Mn-Fe-Ga Sputtered Thin Films
Preparation and Characterization of Ce-Implanted TiO2 Thin Films
Preparation and Characterizaion of Hydrophobic Transparent Hard Sol-Gel Nano-Composite Films
Dependence of Film Thickness on Properties of Al Doped ZnO Thin Films
Effect of Film Thickness on the Structural and Physical Properties of CdZnTe Thin Films
Preparation of C60 Thin Film and Investigation of its Optical Properties
Preparation and Dielectric Measurement of Pb(Zr0.95Ti0.05)O3 Ferroelectric Films
Research on Reflectivity per Wavelength by Foaming Ratio of Plastics and Optical Characteristics
Effect of Sulfuric Acid /Sodium Hydroxide /Sodium Chloride on Properties of Polyurea
Stability of AZO Thin Films under the Environment of Hydrogen Plasma
Effect of RF Sputtering Power on the Structural, Optical and Hydrophobic Properties of SiNx Thin Film
Study on the Properties of LDPE/POE/Zeolite Molecular Sieves Composite Film
Nonisothermal Crystallization Kinetics of HDPE/UHMWPE/n-HA Composites
Preparation and Electrochromic Characterization of Nanocrystalline Nio-Base Thin Films
Manufacture of Non-Toxic Lava from Recovery of the Incineration Ash by Plasma Fusing Technology
Effect of a Thin Cr Layer on the Microstructures and Fracture Behaviours of Copper Films
Evaluation of The Wool Fiber Surface Modified by Chlorine and Pilling Propensity of Single Jersey
Growth of Double-Side Tl-2212 Thin Film on CeO2-Buffered MgO Substrate
Investigation of Dynamic Stray Capacitance and Circuit Network Model for Planar Inductor with Nanocrystal Magnetic Core
Effects of Heating on the Tensile Property of Soybean Protein Fibers
Influence of Sputtering Power of Te and Annealing on Sb-Te Thin Films Fabricated by RF and DC Co-Sputtering
Electrodeposited Crack-Free CdS Thin Films Using Organic Solvents
Surface Modification of Starch and its Application in Rubber Composite with Low Heat Generation and High Fatigue Resistant
The Theoretical Prediction and Experimental Verification of Modal Parameters for Carbon Fiber Reinforced Composites with Sandwich Structure
The Effect of Reinforcement Structure on the Modal Parameters for Sandwich Structure Composite Plate
Synthesis of Waterborne Polyurethane for Coating on HNIW
Study on Analysis Methods of Tear Propagation of Fabric Laminates
Fabrication and Characterization of Transparent P-Type ZnO Films Obtained by In Situ Oxidation of Sputtering Zn3N2 :Al
Room Temperature Deposition and Properties of AZO Thin Films by DC Magnetron Sputtering under Different Plasma Power
Analysis of Influence of Optical Electrode Geometry Effects on Manipulation Using Lateral-Field Optoelectronic Tweezers
The Detection of Different Physical Properties of Laser-Damaged HfO2 Film on SiO2 Substrate by Scanning Probe Acoustic Microscope
Synthesis and Characterization of one Component Heat Cured Polyurethane-Acrylate Sealants
Fabrication of CaWO4:Eu3+ Thin Films via Electrochemical Methods Assisted by a Novel Post Treatment
Theoretical Analysis of Thin Film Oxide as Insulator of Planar Micro-Coils
Influence of Film Thickness on Dielectric Properties of (Pb0.97La0.02)(Zr0.95Ti0.05)O3 Antiferroelectric Thin Films
Preparation of Activated Carbons from Lignite for Electrochemical Capacitors by Microwave and Electrical Furnace Heating
Research on the Oil-Gas Permeability of Mixed Hollow Fiber Membrane Made by PTFE and PHFP
Electrochemical Properties of NiO thin Film Prepared by Sol-Gel Process
Effect Analysis of Ar-N2 Flow Rates on ZrNX Film by Pulsed Magnetron Sputtering Using Design of Experimental Method
The Properties of Organosolv Pulp and Cellulose from Eucalyptus with MK2
Esterification over Nano Solid Superacid So42-/ZrO2-Sm2O3-SiO2