Current Trends in the Development of Industry

Preface and Conference Organization
Chapter 1: Iron and Steel
The [Ti] Content Control of the Tire Cord Steel 82A
Study on Anti-Stress Relaxation Behavior of Non-Quenched Steel
Effective Controlled Method Adding Carbon into Molten Steel to Produce 55Q Steel
Numerical Simulations of Pressurized Elbow under Reversed In-Plane Bending
Corrosion Inhibition of Low Carbon Steel by Pluchea Indica Less. in 3.5% NaCL Solution
Electrochemical Performance of Q235 Steel in Different Temperature and Different Waste Water
Laboratory Investigation of the High Phosphorus Hot Metal Dephosphorization Pretreatment Using Multi Phase Flux
Study on Corrosion Inhibition of Glutaraldehyde for 304 Stainless Steel in Simulated Cooling Water Containing Sulfate-Reducing Bacteria
Chapter 2: Non-Ferrous Metal Materials
Research on the Si-Ti High Temperature Oxidation-Resistant Coatings for Tantalum Alloys
Thermal Non-Destructive Testing for the Titanium Implants
Investigation on Efficient Vanadium Extraction from Vanadium-Bearing Molten Iron
Effects of P Addition on the Oxidation and Corrosion Behavior of Sn-9Zn-1Bi Solder Alloy
Effects of Grain Refiner and Cooling Rate on Solidification Structure of H62 Brass
Low Cycle Fatigue Study of 63Sn-37Pb Solder under Torsional Cyclic Loading
Effects of Trace ZrC on the Microstructure and Properties of Molybdenum Alloy
Simulation of the Elastic Modulus of Mo Alloys at Both Room and High Temperatures
Microstructure and Mechanical Properties of Ti-Al-Mo-V-Ta Alloys
Influence of Additives on Preparation of Aluminum Foam
Corrosion Characteristics of Friction Stir Welded AZ31 Magnesium Alloy
Interaction between Sodium Molybdate and FSWed Weld of 5083 Effected by Temperature
Separation and Dissolution of Phases in 40CrNiAl Alloy during Heat-Hardening
Design and Synthesis of (E)-2-Hydroxy-4-Alkoxyl Salicylaldoxime Copper Extractant
Design and Synthesis of (E)-2-Hydroxy-5-Alkoxyl Salicylaldoxime Copper Extractant
Extraction of Vanadium from Chloride Solutions Using Di (2-Ethylhexyl) Phosphate
Chapter 3: Composites and Building Materials
Thermal Stability and Crystallization Behavior of PP/Organoclay Phase Change Composites
Experiment on Cement Proportion and Mixing Technology for Expansive Soil Modification
Heat Release Performance of the Flame Retardant Rigid Polyurethane Insulation Foam
Fabrication and Characterization of Graphene/Polyimide Nanocomposites
Estimation of Fracture Toughness of Fiber/Matrix Interface
Study on Properties of Wollastonite Micro Fiber Reinforced Mortar
Production of Self-Compacting Concrete Using Rock Breaking Waste Residues
Synthesis of Compound Foaming Agent of Lightweight Foamed Concrete
Synthesis of Polyacrylate Dispersants and the Influence of these Dispersants on Rheological Properties of Unsaturated Polyester Resin (UPR)/Aluminum Hydroxide (ATH) Composites
Study on Preparation of Nanocarbon Black-Polypropylene Electric Conduction Composite Materials
The Thermal Shock Resistance of Mg-PSZ/LaPO4 Ceramics
Fire Risk Assessment of Fire Retardant Polyurethane Thermal Insulation Materials for Exterior Walls of Buildings Based on Analytical Hierarchy Process
Finite Element Analysis of Woven Fabric Laminates Structural Strength
The Effect of Curing Conditions on Mechanical Properties and Durability of Concrete
Effects of Seawater Immersion on Mechanical Properties of CFRP Composites
Finite Element Analysis for the Effect of Weak Interface on the Ratcheting of Particle Reinforced Composites
Preparation of Carbon Nanotubes Doped TiO2/Glass Fiber Reinforced Plastics Hybrid Materials
The Use of Geopolymers in Rehabilitation of Reinforced Concrete Structures
Effect of Carbon Black on the Properties of Polyimide Foams
Research on the Effect of Superfine Powder Micro Bead on the Properties of High-Strength Concrete
The Interlaminar Stresses Analysis of Composite Laminated Plates Based on the Generalized Higher-Order Global-Local Plate Theory
Global Gaussian Collocation Method for Free Vibration Analysis of Laminated Composite Plates
Experiment Study on the Effects of the Dehydration Methods on the Micropore Structure Characteristics of Bentonite
An Analytical Solution of Natural Frequency for Symmetric Laminated Composite Plates
The Experimental Study of Using Composite Polymer Fiber in Concrete
Experimental Study on the Effect of Cathodic Protection System for Concrete Slab Specimens with Zn-Mesh Sacrificial Anode in Marine Environment
Finite Element Modelling of Steel Corrosion in Reinforced Concrete Cylinders
Optimization of Fermentation Medium for Pullulan Production by Aureobasidium pullulans A225 Using Plackett-Burman and Response Surface Methodology
The Research on Early Age Deformation of Shrinkage-Compensating Concrete
Experiment Study on Mechanical Properties of Shotcrete under Heat Injury Environment of High Ground Temperature Tunnel
The Study of Curing Characteristics of Epoxy Asphalt
The Design and Preparation of Foam Concrete Absorber for WLAN Anti-Jamming EMW-Absorber
Preparation of Novel Foaming Agent and its Application in Foam Concrete
Recycling MSTP Sludge as an Admixture in Concrete
Researches on the Application of Cement and Fly-Ash-Flushed-by-Seawater Stabilized Crushed-Stones Roadbases
Study of Adherend Thickness Influence on the Bond Strength of Carbon/Epoxy Composite Joints
Preparation of a New Unburned Brick from Ti-Bearing Blast Furnace Slag and PVA Modified by Epikote
Chapter 4: Micro/Nano Materials
Effect of Oxalic Acid and Temperature on Hydrothermal VO2 (B) Transformation to VO2 (M)

In Vitro Release Characterization of Tetracycline Hydrochloride from PLGA/Tetracycline Hydrochloride Electrospun Nanofiber Mats
Pretreatment of Bamboo Powder for Cellulose Nanocrystalline by Sulfuric Acid Hydrolysis
Synthesis of Silver Nanowires by 5-Hydroxy-Tryptophan
Influence of ZnO Powders on the Stability of the Foams Stabilized by Surfactants
Ionic Liquid-Assisted Synthesis of Anatase Nanostructured TiO2 Aerogel Doped with Fe3+ by a Low Temperature Sol-Gel Process and its Photocatalytic Performance
Extracellular Biosynthesis of Ag Nanoparticles by Commercial Baker's Yeast
Controllable Biosynthesis of Gold Nanoparticles by Culture Medium of Baker's Yeast
Preparation of Hierarchical CuO Nanoparticles and their Photocatalytic Activity
Preparation and Characterization of Hollow Spheres with Cubic Mesoporous Shell
Soft Template CTAB-Assisted Synthesis of Mesoporous Ni-B Amorphous Alloy Nanoparticles
Synthesis of Nanostructured PdMo Electrocatalysts for Oxygen Reduction Reaction in Fuel Cells
Study on Zeta Potential of Micron-Size Tourmaline Powders
Study on Organic Light-Emitting Diode Based Photonic Crystal Substrate Fabricated by Nanoimprint Lithography Technology
Analysis of Graphene Based on Femtosecond Probing
Nanodiamond/Polyimide High Temperature Dielectric Films for Energy Storage Applications
Synthesis and Characterization of CuO Nanorods by Hydrothermal Method
Synthesis of Copper Nanohexagons and Microflowers via a Surfactant-Assisted Hydrothermal Process
Study on a Novel Structure of Yttrium Complex, C4H10O10Y
Study on a Structure of 2,6-Pyridine-Dicarboxylic Acid Mn, Mn2(C7H3NO4)24H2O
Introduction of Adsorption Mechanisms Researches on Organic Chemicals and Metallic Ions on CNTs
Structural and Optical Properties of Well-Aligned ZnO Nanorod Arrays Grown by a Hydrothermal Method
Research Development on Hydrophobic Modification of Cellulose Nanofibrils
Synthesis and Characterization of MgO-Filled Rectangular Carbon Nanocapsules
Controlled Synthesis of Different Morphologies of SrWO4 Crystals via a Surfactant-Assisted Hydrothermal Precipitation Method
Preparation and Characterization of Graft Copolymerization of Methyl Methacrylate onto Chitosan
Study on the Photocatalytic Degration of Diesel Pollutants in Seawater by Li+-Doped Nano-TiO2
Liquid-Free Approach for Alignment of CNTs Bundles via Electrostatic Field
Application of a Nano-Material Releasing Anion on Rice Paper
Fabrication of Nanocolorants Using Miniemulsion Solvent Evaporation Technique
Surface-Modification of Sulfur Nanoparticles with Surfactants and Application in Agriculture
Study on Preparation of Polishing Powder for LCD
pH Dependence of the Size and Shape of the Gold Nanoparticles Prepared by Peptides
Synthesis and Characterization of SiC Nanoparticles with Lamellar Structures from Taixi Coal
Controlled Release Characteristics of PLA-Pluronic-PLA Nano-Sized Vesicles In Vitro
Effect of Grinding on the Photocatalytic Activity of Commercial ZnO Powder
Synergism between Intumescent Flame Retardant and Organo-Montmorillonite in Polypropylene Nanocomposites
Electrocatalytic Property Toward Dopamine and Uric Acid of the Nanoparticles TiO2 Modified Electrode
Phase Field Crystal Modeling for Nanocrystalline Growth
Fabrication of Fluorescent Polymer Crossbar Arrays and Microropes via Centrifugal Electrospinning
Preparation of Nanoscale Magnesium Fluoride Powders by Ultrasonic-Assisted Direct Precipitation Method
Electrochemical Behavior and Determination of Rutin at Inlaid Multi-Wall Carbon Nanotubes Modified Graphite Electrode and Reline Ionic Liquids
Mechanical Properties and Microstructure of PMMA-ZrO2 Nanocomposites for Dental CAD/CAM
Preparation and Luminescence of Host-Guest (SBA-15)-(Arsenano-III) Nanocomposite Materials
Synthesis and Characterization of Magnetic Microspheres
Preparation of Titania Nanowire Arrays by Sol-Template Method
Investigation of the Interference of Carbon Nanomaterials with SYBR Green I-Based Real-Time PCR
Effect of Different Particle Size of Nano-Zinc Oxide on the Surface Binding Energy in Polyimide/Zinc Oxide Composites
Chapter 5: Functional Materials
Yellow Organic Light-Emitting Devices Based on Alq Doped DPIHQZn
Magnetic Correction of Materials with Weak Magnetism Signals
The Research of Qualitative Analysis Method for Far-Infrared Fiber
Establishing Chemical Bond Layer of Poly(Ethylene Glycol) on NiTi Alloy Surface
Synthesis and Characterization of Ni-Doped ZnO Nanorods Prepared by Hydrothermal Method
Effects of Conductive Properties with Conductive Particles Blended in Conductive Silicon Rubber
Assembling of Composite of Ag/TiO2/Eu-MCM with Enhanced Photocatalytic Activity
Core-Shell Structured Nanocomposites with Electromagnetic Properties
Preparation and Characterization of a Novel Polyurethane Solid-Solid Phase Change Materials
Preparation and Properties of Photochromic Microspheres
Orange Electrophosphorescence of 2-(9, 9-Diethylfluoren-2-yl)-5- Trifluoromethylpyridine Iridium Complex
Pineapple Leaf Fiber as a New Potential Natural Fiber in Rope Making
Crystallographic Studies of Nd3-xYxFe27.5TM1.5(0.6?x?2.4, TM=Ti, Mo) Compounds
Isothermal Dehydriding Kinetics of Mg2NiH4 Prepared under an External Magnetic Field
A Novel Method for Prepairing Higher Performance Picroside I Surface Molecularly Imprinted Polymers for TCM Research
Fabrication of PA-6 Fiber Mixed with Nanometer ZnO and CeO2 with UV Radiation Resistance
Effect of Dyeing and Finishing Process on Anti-Ultraviolet Properties of PA6 Knitted Fabric
Preparation and Characterization of Novel Bipolar Copolymers Based on Quinoline Aluminum and Carbazole
Research on Antimicrobial Activity of Functional Protein Films
Effect of Microstructure on Magnetic Properties of Nd-Fe-B Permanent Magnet
Spin State and Magnetic Properties of Nd1-xSrxCoO3 (0.1?x?0.5)
Liquid Crystal Phase Behavior of Novel Mesogenic Compound with Trifluoromethyl Substitutent
Micromagnetic Simulation of Magnetic Hysteresis in Hard/Soft Bilayered Exchange Spring Magnets
Preparation of Novel Liquid Crystal Material with Trifluoromethyl Substitutent
Removal of Heavy Metals in Water by Functionalized Mesoporous Silica Materials: A Review
Structural and Dielectric Properties of Bi0.9Pr0.1Fe1-xTixO3 Ceramics
Spectroscopic Investigation of ?-LiAlO2 Ceramic Doped with Tetrahedrally Coordinated Cr3+ Ions
Studied on Characteristics of Mg (4.5 Mol%)-Doped LiNbO3 Crystal Using Li Vapor Transport Equilibration
Properties of Protective Clothing for Medical
Reach on P/N Type Intumescent Flame Retardant for Polyester Fabric
Enhancement of Electroluminescence Efficiency for Organic Light-Emitting Devices due to the Introduction of the Well as Excton Confine Structure
A Temperature-Sensitive Hydrogel for Suppressing Oil Fire
The Influence of Different Fire Resistance Materials on the Thermal Protection Property of Firefighter Uniform
Properties of Coal Tar Pitch Modified with Acid and Oxidation Treatment
Study on Optimization of Activated Carbon Preparation Process Based on Apricot Shell
Preliminary Research on the Preparation of Ce-Doped TiO2 by Sol Method
Preliminary Study of Activated Carbon Modified by Silica Aerogel
Synthesis and Photochromism of Bis(thien-2-yl)Cyclopentene Derivatives
Mechanism and Preparation Methods of Inorganic Fire-Retardant
The Evolution of Activation Field with Temperature in Ferroelectric Copolymer of Vinylidene Fluoride and Trifluoroethylene Films
Preparation and Characterization of Yttrium Iron Garnet Glass-Ceramics
Electrical and Electrochromic Characterization of Poly(ethylene Oxide)/Molybdenum Doped Vanadium Pentoxide Films
Fabric Selection of Thermal Underwear under Different Conditions
Facile Synthesis and Performance of Reduced Graphene Oxide/Cobalt Oxide Composite for Supercapacitor
Performance of Fast Thermally Reduced Graphene Oxide for Supercapacitor
The Surfactant Assisted Synthesis of MoS2 Nanospheres with Improved Lithium Storage Properties
Controllable Synthesis of Birnessite-Based Manganese Oxide Nanostructures
Effect of ?-Cyclodextrin on Electrochemical Properties of LiMn2O4 Synthesized by Solid-State Combustion Synthesis
Influence of Solution Concentration and Annealed Time on P3HT:PCBM Film Device Performance
Polyacrylonitrile-Based Activated Carbon Fiber/SnO2 Composites via Different Synthetic Methods
Process Analysis of Rb+ and Cs+ Adsorption from Salt Lake Brine by Ammonium Molybdophosphate Composite Material
Structural Evolution and Electric Properties of Low Content Zr-Doped BiFeO3 Thin Films
Chapter 5: Functional Materials
Two-Membrane-Pieces Sensitizing Technology and Cyanines Sensitized Nano-TiO2 Materials
CO2 Solubility and Physical Properties of Two Containing Fluorine Functional Ionic Liquids
Initial Surface Reactions Mechanisms of Atomic Layer Deposition TiO2Using Ti(OCH3)4 and H2O as Precursors
Chapter 6: Surface Engineering/Coatings
HVOF Spraying Process Optimization for the Deposition of Submicron Structural WC-12Co Coatings
Effects of Yttrium on Cyclic Oxidation Resistance of Co-10Cr-5Al Alloy
Influence Nitriding in the Electrolytic Plasma on the Tribological Properties of Low-Alloy 40Cr Steel
Oxidation and Adhesion of Decorative Nickel-Chromium Plating on Ferritic Stainless Steel
A Comparative Study of Wear and Oxidation Behaviors of End Mill Coated by PVD Coatings
Carbon Nanotubes Improves the Tribological Properties of Ni60/Al2O3 Coatings
Electrodeposition of MgO/Calcium Phosphate Composite Coatings on Titanium for Biomedical Applications
Preparation of Silica Hybrid Films on PMMA by Sol-Gel and Solvothermal Methods
Research of Organic/Inorganic Chromium-Free Co-Passivation Treatments for Galvanized Steel
Preparation and Research on Anticorrosion Zinc-Rich Coating of Hydraulic Metal Structure
Synthesis of Hydrophilic Epoxy-Functionalized Films by UV-Initiated Copolymerization
Research on Surface Roughness of Die Steel in Micro-Etching
Preparation of Thick Ceramic Coating by Laser Multi-Layer Cladding II - Microstructural Characteristics
Preparation of Thick Ceramic Coating by Laser Multi-Layer Cladding I - Crack Control
The Spherical Casting WC Powder and its Application in Laser Surface Alloying Treatment
Effects of Yttrium on Cyclic Oxidation Resistance of Co-10Cr-5Si Alloy
Sn Whisker Growth in Cu(Top)-Sn(Bottom) Bilayer System upon Room Temperature Aging
Fabrication and Microstructure of Zn-Sn Target Material Alloy
The Effect of Grain Size and Cl-Concentration on the Passive Behavior of Cu in Borate Buffer Solution
Investigating Electrochemical Inhomogeneity on Phosphating Process of Nano-SiO2 Additive Using Wire-Beam Electrode
Kinetics of Ni-Nano Cr2O3 Composite Coating during Early Electro-Crystallization Processes
Semiconducting Behavior of Non-Solid Electrochemical State of Carbon Steel in Electrolyte Solution
The Electrodeposition of Ni-Fe-Cr Alloy Coatings on Mild Steel Surfaces and Evaluation of Corrosion Resistance
The Effect of Cl- Concentration on the Corrosion Behavior of Electroplated Cu-Ni-W Alloy Coating
Polymerizer Coating Control Based on Sequence Table
Effect of Rock Asphalt on the Surface Free Energy of Asphalt
Study of Nanoparticle Coating Technology to Control Product Corrosion in Aerospace Industry
Influence of Magnetron Sputtering Parameters on Surface Properties of TiN-Coated Bearing Steel
Preparation of Biomimetic Superhydrophobic Silica/Polyurethane Composite Coating
Chapter 7: Technologies of Manufacturing and Processing of Materials and Raw Materials
Orientation Distribution of Fiber Suspensions in Extensional Flow
Microstructure and Properties of Joints by Manual Self-Propagating High-Temperature Synthesis Vertical Weld
Numerical Simulation of CO2 Welding 409 Stainless Steel Multi-Crossed Parts
Hot Deformation Behavior of Cu-Ag Alloy for Cu Cladding Al Contact Wire
Fracture Pressure Stimulation of Multi-Stage Horizontal well Fracturing with Several Perforating Clusters
Study Changes in Tool Wear of Stainless Steels ELC X01Cr18Ni10Ti when Drilling
Flow Velocity Affecting Dendrite Growth of Fe-C Alloy
Effect of Al Content Addition on Microstructure of Mg-9Zn-xAl Alloy
Manufacturing Technology of Space Optical Materials
Study on the ISF Procedure of the Throttle Pedal Fixed Plate Based on the Numerical Simulation
Effect of SF6 Concentrations on Protective Film of Vacuum Counter-Pressure Filling Molten Magnesium Alloy
Synthesis of Starch Acetates and Electrospinning
Quantitative Risk Assessment of Oil Well Casing Strings under Non-Uniform External Loadings
Investigation of Parameters Relevant to Microcellular Foam Injection Molding
A Method to Produce AA6101 Aluminum Alloy Rein-Forced Conductors
Interface and Bonding Strength of Explosively Welded T2/DT4C Laminate
Analysis of the Sintering Properties of Electrolytic Manganese Residue
Study on Comprehensive Recycling of an Ilmenite Ore Beneficiation Test
Preparation and Mechanism of Cordierite by Using Calcined Bauxite as Raw Material at Relatively Low Temperature
Research Advance on Comprehensive Utilization of High Iron Bauxites
Influence of Important Factors on Ammonia Leaching of Alkaline Zinc Oxide Mineral
Surface Cracks Analysis on Continuous Casting Slab Q345c during Hot Delivery and Hot Charging
Studying on Leaching Zinc Oxide Ore in the System of H2SO4
The Effect of Diameter of Stirrer on Microstructure and Mechanical Properties of Joint Braze by Stirring Brazing of Al/Mg Alloy
A New Criterion for Optimization the Intermittently Reversing Direction Electromagnetic Stirring in Round Strands Continuous Casting
Analysis and Control the Pressed into Defects of Acid Rolling Strip Foreign Body
Surface Magnetization of Hematite by Metal Ions
Recent Progress on Derivation and Chemical Modification of Rosin Acids
Hydrothermal Synthesis of Zeolites from Lake Sludge
Correlation Analysis of Seamless Fabric Performance and Sizing Effect
Preparation and Application of Lead Dioxide Electrode for Zinc Electrolysis
Effects of Post-Rolling Anneal on the Primary Recrystallization Structure and Texture of High Permeability Grain-Oriented Silicon Steel
Optimization of MTO Olefins Separation Process
Chapter 8: Modeling, Analysis and Simulation of Processes and Parts of Machines
Buckling Characteristics of Microdrills by Using Finite Element Method
Modeling and Simulation of Hydraulic Excavator Based on Virtual Prototype
Finite Element Analysis of Polyethylene Pipe Butt Fusion Joints with Circumferential Surface Cracks
Dynamic Simulation of Petlyuk Column for Separation of Ternary Mixtures
CFD Simulation of Flow Characteristics in Liquid-Liquid Ejectors
Nonlinear Stability Impact of Concrete-Filled Steel Tube Arch Bridge
Contact Stress Analysis and Optimization Design of Ball Cage Patterned Constant Speed Universal Joint
The Effect of Cover Thickness to Corrosion Characteristics of Reinforced Steel Bar Emedded in Mortar Specimen (W/C:0.6) Aged 5 Years in Seawater
CNC Processing Method of Complicated Curved Surface
Study on Aircraft Lift Estimation
Research on Unconventional Layouts of Aircraft
The Analysis on the Keyless Coupling of Rudder System by Means of the Finite Element Method
Existence and Uniqueness of Positive Solutions of a Randomized Spruce Budworm Model
Modeling and Simulation of Monocrystal Piezoelectric Generator
A Dynamic Contact Model of Rough Surfaces Based on the Microscopic Contact Analysis of Asperities
Simulation of Filling and Solidification Processes of Rump Pan by Procast
Parameter Design of Cylinder Gear Pairs with Small Number of Teeth
Preliminary Study on Dynamic in Statics of Packaging Container Model Designs
Design and Experiment of Vortex Rings Umbrella Based on Finite Element Method
Finite Element Simulative Analysis on the Influence of Solid-State Transformation on Welding Residual Stress
The Research of Adhesively-Bond of Paster Single Lap Joints on Strength Based on ANSYS
An Improved Dynamic Constitutive Model of Dynamic Mechanical Property of Concrete
Car's Materials Acoustic Properties Test and Analysis
Loading Test Scheme Research on Long-Span Suspension Bridges
Experimental Study on Wave Dampening Ability of Floating Breakwaters
Structural Analysis and Optimal Design of Lightweight Skate for Loading and Unloading
Molecular Dynamic Simulations of Diffusion Behavior of Diesel Cold Start Emissions
Research on Walking Mechanism Base on Biological Metal Fibre
Modeling and Simulation of the New Thin Film Transformer Equivalent Circuit
Phase Field Simulation of Precipitation on Edge Dislocation
The Research Status of Equivalent Spaced Targets in Armor-Penetration Projectile Power Test
Research of All-Hydraulic Die Forging Hammer Control System
Dynamic Simulation of Methanol Synthesis Loop under Abnormal Conditions
Experimental Investigation about Rinse Water Consumption of a CIP Process Applied to a Shell and Tube Exchanger
Design and Acoustic-Structural Coupling Analysis of Bionic Microphone
Mechanical and Thermal Analysis of Topological Optimization for Load Bearing Skate
Chapter 9: Measurement, Detection and Monitoring, Testing and Instruments
Research on Optimizing Magnetic Memory Testing Parameters Based on the Criteria of Maximum Component Change of Magnetic Field
Signal Reconstruction Based on a Fusion Compressed Sensing Frame
New Method for Imaging and Inversion of Interval Velocity
Research of Model Based Imaging and Wave Impedance Inversion of Seismic Signal
Evaluation of Land Surface Temperature Retrieved from MODIS Data
Research on Intelligent Monitoring System of Fangcheng Port's Bulk Cargo Ship Unloader
A Measurement and Analyze System for the KY231 Material Strain Tester Base on STM8S207 and Virtual Instrument
Black Hole Spectroscopy in the Isotropic Coordinate
Simultaneous Determination of Copper, Lead and Zinc in Alloy by Potentiometric Titration Coupled with Multivariate Calibration Using a Flow Injection Technique
Alternating Magnetic Field Method Application to Detection of Blade Part
Research on Remote Monitoring Technology of Mechanical Conditions of Port Logistics Operations Based on Key Nodes
Elliptical Measurement for Faraday Rotation in Multimode TeO2-ZnO-Na2CO3 Fiber for Magneto Optical Current Sensor Application
Matlab Image Processing Technique and Application in Pore Structure Characterization of Hardened Cement Pastes
Design and Analysis of Fault Diagnosis System of Electrohydraulic Servo Valve Based on ANN
Modification and Application of Gaussian Plume Model for an Industrial Transfer Park
Chapter 10: Applied Computational Methods and Algorithms in Engineering Sciences
A New Approach for B Ultrasound Images Enhancement
A Class of Integral Inequality and Application
Research on the Application of Using Genetic Algorithm in Military Materials Delivery
A Markov-Based Multi-Attribute Vertical Handoff Decision Algorithm
Soft Sensing of the Lysozyme Mycelium Bacteria Concentration Based on SUKF Algorithm
Determination of Parameters of Leakage of Propane from the Tank
?-D Decomposition to the One Dimensional Delay Differential Equation by Fixed the Coefficient b<0
A Variable Weight Function Model in Geological Variables Function Research
Identification of Nonlinear Systems Using Parallel Laguerre-NN Model
Research of Diver Sonar Image Recognition Based on Support Vector Machine
Sensitivity Analysis in Artificial Neural Network and it's Applications on the Research of Attributes Correlation
Using GM(1,1) to Clean-Table Offensive Techniques
Existence and Blow-Up of Solutions for a Degenerate Semilinear Parabolic Equation
Chapter 11: Engineering Management and Engineering Education
Perspective on Effect of the New Model "Contest of Comprehensive Chemistry Experiment"
Comparison on Dam Risk Consequences Comprehensive Evaluation Model
Exploration on the Cultivation of Engineering Quality through Chemical Engineering Technology Teaching
Supply Chain Coordination Mechanism Logistics Cost Optimization Analysis
The Comprehensive Performance Evaluation to LSSC Based on Grey Relational Analysis
Application Research of AHP in Project Risk Management
Measuring the Information Volume of Teaching Material in Physics and Chemistry on the Basis of the Inter-Disciplinary Connections' Information Model
Training Status and Cultivation Approaches of Double-Qualified Teachers in Engineering Universities
A Research and Practice of the Course Construction of Architectural Drawing and CAD Course - The Awarded Achievement of the 7th Teaching Achievement Awards of Hubei Province
Humanity: A Perspective that Mechanical Engineering Education should Observe - Teachings from The Analects of Confucius and Book of Changes
Discussion on High-Quality Curriculum Construction of Welded Structure in Local Comprehensive Universities
Analysis of Asian Logistics Trade and Merchandise Growth
Global Impacts of the Asian Logistics Competitiveness and Risk Management
Research on Value Assessment System of Educational Cloud
An Inexact Fuzzy-Queue Programming Model for Coupled Coal and Power Management
RFID-Based Agro-Materials Anti-Counterfeiting Management System in Whole Logistics Chain
Design and Implementation of Supesite-Based Experience Exchanging Platform
Modeling of Logistics Information Service System for Display Industry Based on ARIS
Chapter 12: Other Related Themes
Discussion and Analysis on Characteristics of Tombs of Jin Dynasty in Shanxi - Imitated Wooden Structure and Wall Brick Decoration
Preparation of Superhydrophilic Polyethersulfone by Sol-Gel Method
Design of an Image Transfer System Based on the USB Interface
Evaluation on the Plate Laminated Method Using 3D CAD/CAM/CAE System for Construction of Canoe Hull
Research on Missile System with Strapdown Guidance Technology
The Design for Remote Wireless LED Display Based on ARM
Application of Grey Decision in Pool Game Pockets Choice
Research on SMD Capacitor for RF Protection of SCB Initiators
Exploring on the Print-through Criterion of Offset Printing
Route Chart to Stabilizing Permanent Maglev Rotator
The Material Aesthetics Transformation of Jewelry Design
Research on Artistic Innovation of Phoenix Totem Symbol
Exploration of Modern Design Theories and Methods