Resources and Sustainable Development

Preface and Conference Organization
Chapter 1: Mineral Prospecting and Geological Exploration
Variation of Wind Resistance Reliability of Foundation in Coral Sands
The Study on Hydrous Pyrolysis Experiments of Coal-Measure Source Rocks in Ordos Basin
A Method of Spatial Analysis of Fault Structure Based on 3D GIS
A Research on Coal Reservoir Geological Modeling and its Application in Exploration and Development of the Coalbed Methane (CBM)
A Study of Mineral Characteristics and Metallogenic Stages of Luziyuan Pb-Zn-Fe Polymetallic Ore Deposit, Zhenkang
A Study of Ore-Controlling Factors and Metallogenic Mechanism of Lead-Zinc Deposit in Luziyuan, Zhenkang, Yunnan
Analysis for the Global Distribution and Requirement of the Copper Resources
Application of 3D Apparent Physical Properties Inversion Method in an Iron Mine Area
Applications of Conventional Logs in Low Resistivity Contrast Tight Gas Reservoirs Identification
Characteristics of Coal and Gas Outburst within Gas Geological Units in Qidong Mine
Characteristics of Lead and Zinc Polymetallic Deposit and Wall Rock Alteration Zoning in Luziyuan, Yunnan
Estimation of In Situ Stresses by Using Hydraulic Fracturing and Welllogging Data in Shizhuangnan Coalbed Methane Field
Formation Age of the Qinling Complex and the early Paleozoic Tectonic Event
Framework of Sequence Stratigraphy Sedimentary System and Evolution of Yimin Formation in Yimin Depression
Geochemistry of Huyanshan Alkaline Complex, Shanxi Province, China: Evidences for the Sources of Magma
Geochemistry of late Permian Coals from the Yantang Mine in Xuanwei, Yunnan, China
Geochemistry of Sulfur in Extract from Hedong Coal Mine, China
Geoelectrochemical-Extraction Measurement Method to Look for Hidden Lead-Zinc Ore Deposit and Prospecting Effect
Geological Characteristics of Viscous Reservoirs & Mining Safety Technical in Northern Tibet Plateau
Geological Factors Analysis of Gas Unusual Area in Southwest of Shandong Province
High Resolution Sequence Stratigraphy of Silurian Strata in Tazhong Area
Influence Factors Analysis for the Next 20 Years of Chinese Copper Resources Demand
Influencing Factors of Chinese Aluminium Resources Demand in the Next 20 Years
Late Cenozoic Faults and Shallow Oil Accumulation in the Nanpu Sag
Ore-Forming Fluid System of the Anqing Cu-Fe Deposit, Anhui Province, China
Paleo-Heat Flow Anomaly at the End of Middle Permian in NE Sichuan Basin, SW China: Did an Ocean Trough Exist?
Research on the Natural Gas Enrichment Regularity of Es1 Layer in Yangxin Subsag of Jiyang Depression
Researching on Geological Characteristics and Economic Significance of Jinla Pb-Zn-Ag Deposit in Cangyuan County, Yunnan
Sedimentology and Coalbed Methane Geology of Middle Jurassic Coal Measures in Juhugeng Mine, Qinghai Province
Sedimentology and Reservoir Characteristics of He8 Member, in a Gas Field of Ordos Basin, Northern China
Sequence Boundaries Identification of Putaohua Oil Layer in Qijia-Gulong Area
Structure Evolution of Qinjiatun-Qindong Fault System in Lishu Subbasin
Study on Multifunctional Electromagnetic Prospecting Technology in Mineral Exploration
Study on Primary Controlling Factors to Carbonate Reservoir Physical Properties of Zhanazhol Oilfield
Study on Reservoir Characteristics of Shuguang Lower Hill
The Analysis of Sedimentary System and Provenance of Saertu Reservoir in Jiangqiao-Pingyang Area in Northern of Songliao Basin
The Analysis on the Evolution of Depositional Sequence in the Mid-Depth Formation under the Control of the Medium-Long Base-Level Change in Huanghekou Depression
The Automatic Identification of Aperture in Carbonate Rocks
The Present Conditions of Micro-Fine Disseminated Refractory Oolitic Hematite and Expectation
The Saidu Gold Deposit of Southern Altai, China: Mineralizing Stages and Ore-Forming Fluids Evolution
Tracing of the Deep Fluids in Western Tianshan by the Electron Microprobe Analyses of Omphacite Form High-Pressure Veins and Host-Rocks
Well Logging Identification Methods for Volcanic Lithofacies in the North of Songliao Basin, China
Paleogeolography of early Coal-Forming of late Permian in Chongqing
Experimental Study on Microscopic Structure and Permeability of Tectonic Soft Coal
The Seismic Facies in the Pliocene from the Shenhu Gas Hydrate Survey in the Northern Continental Slope of South China Sea
Influence of Shale Gas Development on Land
3D Geological Modeling for Zhouan Cu-Ni-Pt Sulfide Deposit, Henan, China
A Tentative Study of Relationship between Mantle Plumes, Supercontinents and Orogenic Gold Deposits
Achieving the Logging Item's Sensitive Analysis of Complex Lithology by Using the Cross Plot Technique
Aggregation Condition and Prediction of Favorable Area for Xujiahe Formation Shale Gas in Guangyuan Tenement Blank Area
Analysis of Potash Resource Situations in China and Development of Yiliping Saline Lake in Qinghai Province
Analysis on Grain-Size Characteristics and Sedimentary Environment of Conglomerate Reservoirs in Ying-4 Section of Xingcheng Gas Field of Songliao Basin
Analysis on the Surface Subsidence Regular about Paste Filling Mining under the Buildings
Application of Inversion after Limestone Hollow-Out in Pearl River Mouth Basin
Assessment of Rare Earth Supply and Demand Relationships: A Literature Review
Carbonate Depositional Facies Analysis and Reservoir Prediction for Central Block in Pre-Caspian Basin
Characteristic Analysis of Texture and Structure of Ores and Genesis of Luziyuan Pb-Zn Polimetallic Deposit in Zhenkang, Yunnan, China
Coal Resources and Tectonic Division of Ordos Basin
Environmental and Economic Significance and Feasibility Analysis of Tight Sand Gas Reservoir in China
Establishment of Isochronous Stratigraphic Framework of Fuyu Oil Layer in Toutai Oil Field and its Significance
Evaluation of the Gas Content of Coal Reservoirs with Geophysical Logging in Weibei Coalbed Methane Field, Southeastern Ordos Basin, China
Fluid Inclusion and Mineralization Epochs Studies of Luziyuan Pb-Zn Deposit in Yunnan Province, Southwestern China
Geochemical Characteristics and Analysis of Tectonic Setting of Hannuoba Basalts from Chifeng Region, Inner Mongolia
Geochemical Characteristics and Tectonic Implications of the early Permian Volcanic Rocks from Ongniud Banner, Inner Mongolia
Geochemistry of Shales from Cambrian Mantou Formation, Northern Anhui Province, China
Geological Statistics Study on Grade Variations in Ore Body 1 of the Macheng Iron Deposit, East Hebei, China
High-Resolution Sequence Stratigraphic Division and Monosandbody Isochronic Correlation of Meandering River Delta of Fuyu Oil Layer in the Northern Honggang
Hydrocarbon Geology Characteristics and Oil & Gas Resource Potential in the Afghan-Tajik Basin
Influence of Deposition Characteristics in the Heavy Oilfield Development Stage
Major Controls on the Evolution of the Cambrian Dolomite Reservoirs in the Keping Area, Tarim Basin
Metallogenic Model and Prospecting Orientation of Aketasi Gold Deposit in Xinjiang
Microbialites from the Upper Cambrian in the Tarim Basin, Northwest China: Implication for Depositional Environments
Pi Decision Technologys Application to Profile Control and Water Shutoff in Jiyuan Oilfield Luo27 Well Field Chang4+5 Reservoir
Potential Hydrocarbon Resources in Aral Sea Area in the North Ustyurt Basin
Predict Channel Sand Body Distribution Characteristics of South Eighth District Based on RMS Amplitude Attributes & Frequency Division
Regional Geology Background and Minerogenetic Series in Ongniud Banner of Inner Mongolia
Research and Application on Model of Dynamic Controlling Sand in Surennuoer Area
Research and Applications on the Theory of Shale Gas Depth Enrichment Zone
Research on Character of Sandlayer in Heidimiao Oil Layer in Yingtai Area
Research on the Relationship between Geothermal Field and the Tectonic in Himalayas and its Surrounding Regions
Sedimentary Microfacies Analysis of Xingbei 1-3 Zone in Daqing Oilfield
Sequence Stratigraphy of Jurassic Succession in Central Junggar Basin, China
Tectonic Environment and Geochemical Characteristics of Geza Arc Magmatic Rocks in Sanjiang Orgenic Belt, SW China
Tectonic Evolution and Coal-Bearing Series Hosting Status Analysis on Coal Basins in Eastern Heilongjiang Province in China
The Application of Induction Logging Adaptive Deconvolution Processing in Water Flooded Recognition
The Characteristics of Fault Belts Distribution in Pubei Oilfield Daqing, China
The Distribution of Clay Minerals in the Middle 3rd Member of Shahejie Formation in Dongying Depression and its Main Controlling Factors
The Double (or Multiple) BSRs Observations and their Tentative Interpretations
The Provenance Tectonic Background Analysis of the Upper Jurassic Mohe Basin in Northeast China
The Research of Gas-Water Relations in Low-Permeability Tight Sand Gas Reservoir - Taking Zizhou Gas Field for Example
The Structural Analysis of Deep Gas Occurrence and Prevention of Gas Disaster in Fengfeng Coalfield
Three Dimensional Fine Structure Modeling of Haqian1 Wellblock, in Northern Dzungaria Basin, China
Zoning and Exploration Significance of the Maoping Pb-Zn Deposit, Northeastern Yunnan Province, China
Characteristic Analysis of the Transition Zone in Carbon Dioxide Miscible Flooding
Analysis of Soil Disturbance by Shield Tunneling
Researches on Sequences Stratigraphy of Neogene in Huanghekou Sag, Bohai Bay Basin, China
Chapter 2: Rock and Mining Engineering, Coal Mining
The Effect of Sodium Dodecyl Sulphate (SDS) on Wettability of Different Coals
Artificial Ground Freezing for Rehabilitation of Tunneling Shield in Subsea Environment
Study of Rock Mass Rupture Law and Seismic Focus Positioning Process Revealed by Microseismic Monitoring
Analysis of Influencing Factors on Effective Radius of Drilling Gas Drainage
Study on Surface Movement and Deformation Characteristics and Pillar Stability of Large Strip Mining under Deep Mining
Coal Seam Roadway Bolt Support Design Method Based on the Supporting Theory of Broken Rock Zone
Connotation and Technology System of Green Mining of Manganese Resources
Coupling Model of Evolution of Mining Fissure Elliptic Paraboloid Zone and Methane Delivery
Effect of the Water Injection Pressure on the Permeability of Coal Body
Experimental Study of Temperature Reduction with Airflow Control Measures in Mining Faces
Investigate about Fan Performance Test of Air Shaft with Lift System
Large Section Open-Off Cut Supporting Technology of Fully Mechanized Caving Mining for Carboniferous Extra-Thick Coal Seam
Lication of Complex Summation in Eliminating the Impact of Minor Faults during the Research on Upper Mining Limit of Coal Seams
Numerical Simulation for Shear Characteristics of Rock-Mass Structural Plane
Numerical Simulation on Effect of Obstructing Airflow by Different Outlet Parameters of Mine Air Curtain
Oxidation of Huolinguole Lignite with NaOCl
Predict Gas Drainage Quantity of Mining with Dynamic Unbiased Grey Markov Model
Prediction of Mining Step in Strong Mine Earthquake Based on Grey System Theory
Present Situation of Coal Recovery Rate in our Country and Countermeasure Research
Research of Bearing Mechanism of Double Support Structure of Deep Soft Rock Roadway
Research on Sodium Removal from Zhundong Coal
Research on the Equipment Addition of Antaibao Open-Pit Mine
Research on the Simulation of the Roof Fracture about the Gob-Side Entry Retaining
Risk Management of Induced Micro-Seismicity Caused by Hydraulic Fracturing through Acoustic Emission
Statistical Analysis on Characteristics of Gas Emission in a Fully Mechanized Caving Face under Drainage Conditions
Strata Behaviors of Fully-Mechanized Sublevel Caving Face Based on Similar Simulation Test
Study on Fully-Mechanized Top Coal Caving Mining under Water Body with Shallow Overburden and Thin Bedrock
Study on Methods of Exploring the Loosening Radius of Deep-Hole Controlling Blasting
Study on Optimization Method of the Slope Angle Design for Open-Pit Mine
Study on Pressure Relief Scope of Underlying Coal Rock with Upper Protective Layer Mining
Study on Regulations of Coal Mining under Highway
The Deformation and Failure Characteristics Research of the Roof Rocks in Anchorage Areas
The Detection Research of Roadway Roof Strata Structure in Coal Seam
Numerical Analysis on Mechanical and Deformation Characteristics of Pile-Anchor Retaining Structure for Waterway Excavation
Research and Application of Ventilation Simulation and Monitoring System in Chensilou Coal Mine
Study on Influencing Factor of Ground Deformation Induced by Shield Tunneling
Study on Characteristics of Energy for Hard Roof Fracture in Island Workface
Coupling Flow-Reaction-Transmission during Square Column Leaching Processes
Evaluation of Stress-Controlled Permeability of Coal Fractures - A Laboratory Study
A Study of Mining Administrative Agencies in the United States
Analysis of the Dynamic Pressure Characteristics for Rock Fracturation under High Intensity Mining
Application of Wasteless Mining in Hongtoushan Copper Mine
Application of Fuzzy Mathematics in the Networks Optimization of Mine Ventilation System
Bolt-Grouting Support in Soft Rock Chamber of Coal Mine
Developing Strategies of Graphite Industry in Heilongjiang Province
Effective Filling Rate in Filling Mining's Influence on Overlying Strata's Movement
Experimental Research on Deformation Properties of Gangue-Paste Filling Material in Mine
Experimental Study on Spectrum Characteristic of AE during Brittle Rock Fracture under Uniaxial Compression Based on Welch
Geochemical Characteristics and Comprehensive Utilization of the Main Coal Seams in Wubu Mining Area, Northern Shaanxi Province

In Situ Stress Measurement and Inversion in Deep Roadway
Mechanical Property of the Deep Surrounding Hard Rock under Complex Environment
Mining Project Design under Villages and Comparison Analysis of Mining Method
Numerical Simulation Analysis on Deformation Mechanism of Shallow-Buried Soft Rock Roadway
Numerical Simulation of Breaking Arch Evolution Rule of Coal Seams Mining
Optimization Analysis of Pillar Position under Inclined Coal Seam Pillar
Outburst Hazard Prediction Based on the Monitoring Data in Heading Face
Research and Application of Phase Space Reconstruction Theory in the Prediction of Slope Failure
Research and Practice of Rock Mechanics for Mining of Large and Thick Pillars with Inclusion of Fillings
Research of Large-Area Hard Roof Caving Prevention and Control System in Shortwall Mining Face
Research on Support Technology of Long Anchor in Fully-Mechanized Caving Thick Coal Broken Roadway
Research on Technology Innovation of Coal Industry under Environmental Regulation
Study on Characteristic and Mechanism of Deformation and Failure of Roadway Surrounding Rock in Deep Mining
Study on Contraction of Dust Control System in Continuous Coal Mining
Study on Energy and Stress of Irregular Failure Zone of Upper Layered in Slice Mining
Study on Pipeline Self-Flowing Transportation of Cemented Tailing Fill Slurry Based on Fluent Software
Study on Pressure Regularity of the Fully Mechanized Coal Mining Face and Evaluation on Support Adaptability
Study on the Principal of Ground Pressure within the Top Irregularly Damaged Zone in Working Face
Study on Top Slice Irregular Destroyed Areas of Spatial Exploration Location and Mining Method
Test Study of Water-Resisting Ability of Coal Seam Floor Rock Mass
The Affection of Ke of Coal Seam on Strata Behavior
The Applied Research of Loose Blasting Technique in Managing Crushing Accident of Fully Mechanized Coal Mining Face
The Beneficiaries under the Current Pricing System of Global Mines
The Research on the Evaluation and Warning Model of Mining Industries' Security
Chapter 2: Rock and Mining Engineering, Coal Mining
The Theory and Practice of Forepoling Pre-Stressed System Bolt in Preventing the Rib Spalling
Water Probe in Coal Mine Working Face
Preparation and Application of the Integrative Hydraulic Drilling and Reaming Completely Technology
Chapter 3: Mineral Process Engineering
Study on Drainage Oil to Prepare Collectors of Coal Flotation
Temperature Dependent Solid-Liquid Extraction Behavior of Rare Earths Using N-Butyl Pyridinium Hexafluorophosphate with Benzoyl Acetone
Effect of Leaching Conditions on Dissolution Rate of Potassium from K-Feldspar Calcined Sample
Research on the Thermal Decomposition Process of K-Feldspar-CaSO4-CaO System
Application of Combined Collectors in Flotation of Lepidolite
Development and Utilization of the Micro-Fine Weakly Magnetic Iron Ore
Efficiently Utilizing a Low Grade and Complex Copper Ore by Flotation
Experimental Study on Flotation of a Yunnan Sulfide a Low Grade Copper Ore
Extraction of Copper from a Refractory Copper Oxide Ore by Catalytic Oxidation Acid Leaching
Intensifying Magnetic Separation of Iron-Bearing Sulfide Minerals by Electron Beam Irradiation Pretreatment
Mineral Processing Experiment Research of Low-Grade and Fine-Size Inseparable Lead-Zinc Ore
Present Status of China's Hematite Processing Technology Study
Recovery Copper from a Low Grade and Ultra-Fine-Grained Dissemination Mixed Copper Ore by Flotation
Research of Coal Desulfurization on Microwave
Research of the Complex Copper Slag Flotation Experiment
Research Status of Gold Recovery from Thiosulfate Leaching Solution
Study on Exploiting and Utilizing Technology of Certain Middle-and-Low-Grade Bauxite
Study on Flotation Techniques of Tailings in Dachang Mining
Study on Mineral Processing Technology of Unutilizable Lead-Zinc Mixed Ore
Study on Recovering Carbon and Iron Concentrate from Flue Slime of Blast Furnace
Study on the Optimal Condition of a Copper-Bearing Gold Ore Cyanide Leaching Using Orthogonal Design
Tin in the Comprehensive Utilization of Mineral Processing Engineering and its Research Progress
Research on Characteristics of Ore-Forming Fluids of Dahongshan Copper Ore Deposit
A Non-Toxic Depressant for Galena in Differential Flotation of Cu-Pb Sulfides
Containing Rare Earth Phosphate Rock Processing and Rare Earth Enrichment in those Processes
Direct Reduction Experiment on Low-Grade Limonite at JiangXi
Experimental Study on Concentrating Scandium by Leaching from Associated Scandium Ore
Experimental Study on Extraction of Scandium from Complex Silicate Ore
Experimental Study on the Cyanidation of a Low-Grade Gold with High Content of Arsenic in Myanmar
Flotation Behavior of Smelting Abandoned Copper Slags
Influence of Collectors on Flotation of Fine Tin Middlings after Gravity Separation
Material Flow of the Mineral Resource Development
Output Work of the Electro-Generative Simultaneous Leaching for Sphalerite-MnO2 in the Presence of Acidithiobacillus ferrooxidans
Photoinitiation Synthesis and Properties of Anionic Polyacrylamide
Research of the Low Grade Fluorite Flotation Orthogonal Test
Research on the Flotation Process of Old Tailing in Burma
Study of Manufacture Process and Properties of Tailings and Slag Based Mine Filling Cementitious Materials
Study on Coal Separability for Wangcun Inclined Shaft in Chenghe
Study on Collector for Reverse Flotation of Certain Phosphorite in Guizhou
Study on Flotation Process of Coal Slime
Study on Process Mineralogy and Titanium Separation of Ti-Bearing EAF Slag
Study on the Bulk Flotation of a Low Grade Copper-Molybdenum Ore of Yunnan Province
Study on the Recovery of Sulfur from Multi-Metals Tailings
The Application Status of Triboelectric Separation and its Progress
The Experiments for the Impact of Temperature on the Grinding Rate about Zhao Tong Bauxite
Study on Dissolution Behavior of High Titanium Bauxite
Chapter 4: Oil and Gas Well Development Projects
A Fuzzy Method to Evaluate Remaining Oil Potentiality of PI Group
A Grey Model for Predicting Water and Oil Production Rate
Analysis of Production Characteristics and Prediction of Recovery of Lianhua Oil Layer in Qi 3-17-5 Block
Application of New Hardware and Software Technology in the Oil and Gas Seismic Exploration and Development
Cascade Utilization of Waste Heat in Heavy Oil Exploitation by SAGD Technology
CBM Exploration Prospects Analysis in Northeastern Chian - In Jixi Basin as an Example
Characteristics Curve of Multicontact for CO2 Flood
Compressible Fluids Mitigation Effect Research in Deepwater Oil and Gas Well
Control Factors of Chang 4+5 Reservoir Properties in Jiyuan Oilfield
Controlling Factors of Hydrocarbon Accumulation in Talaha-Changjiaweizi Area
EOS - In the Analysis of Force Balance Conditions for the Formation of Deep Basin Gas
Estimation of CO2 Storage Capacity in Oil Reservoir after Waterflooding?Case Studies in Xinjiang Oilfield from West China
Evaluation of Potential of Remaining Oil after Polymer Flooding
Exploration Prospect of Low Rank Coalbed Methane Coal in Huhehu Depression Hailar Basin
Investigation on Polymer Adsorption and Retention in a Polymer Flooded Reservoir
Minimum Gas Influx Calculation in Gas Drilling after Water Production Based on Absorption Characteristics of Rock
Oil Containment by Floating Boom under Wave-Current Coupling Condition I: Numerical Experimental Platform
Optimization of Polymer Injection Program for Second-Class Oil-Bearing Layer
Optimization of the Injection Rate of Well Group Water Injection Using BP Neural Network Method
Optimization Technique in Double Stepped Thin Horizontal Well
Petroleum Exploration Potential of Xisha Trough Basin in SCS
Research of Retarded Acid Formula System of Qijiabei Oil Field
Research on the CO2 Corrosion Inhibitor Technology in Oil and Gas Fields
Research Status of Steam Assisted Gravity Drainage (SAGD) Technology
Risks and Countermeasures of the Shale Gas Development in China
Scheme to Tap Remaining Oil Potential in Poor Pay Zones
Simulation of Hydraulical Fracture Height by Creating Artificial Barrier
Study of Development of Medium-Deep Heavy Oil Reservoir Pilot Tests in Henan Oilfield
Study on Influence of Injection Method on the Effect of Oil Displacement of Nanometer Microspheres
Study on the Dynamic Control Chart of Pumping Wells
Summary and Overview of Development Technologies of Unconventional Oil and Gas Reservoir
The Current Situation and Prospects of Development of Low Permeability Oil Reservoir
The Effect of Following Water after Polymer Flooding on the Displacement Efficiency with Alternately Injecting Slug of Gel and Polymer/Surfactant
The Effect of Sand Production on Formation Porosity in Unconsolidated Oil Field
The Effects of Qijia Oilfield Water Sensitivity to Formation Scaling of Injected Water
The Exploration and Recognition of Stimulated Reservoir Volume for Shale Gas in Sichuan Basin - Taking Well W201 as an Example
The Hydrodynamic Response and Frequency Domain Analysis of Deep Sea Truss Spar Platform
The Prediction of Scaling Time in Producing Wells of ASP Flooding in the Fourth Plant of Daqing Oilfield
The Seepage Pressure Distribution and the Capacity of Low-Permeability Reservoirs Gas
A Combined Solution Model for Predicting Development Performance of Low Permeability Reservoirs
A Design Model of Technological Parameter for Multi-Layer Reservoir Profile Control
A New Method to Determine Mud Density in Deflecting Well
A Simple Model for Two-Phase Flow in Liquid-Cut Gas Wells
Application of the Imitation Horizontal well Technique in the Development of Low Permeability Reservoirs
Applying Analytic Hierarchy Process to Determine Separate Layer Water Injection Rate of Single Well
Applying BP Neural Network to Determine Proper Water Injection Intensity of Water Drive Oil Field
Comparison of Gas Content Evaluation Methods in the Log Interpretation of Coalbed Methane
Effects of Different Ions on the Corrosion Behavior of SM 80SS Tubing Steel in CO2/H2S Containing Aqueous Solution
Evaluation Model of Profile Control Layers' Selection Based on Fuzzy Cluster Analysis
Gas Cap and Oil Rim Collaborative Development Technique Policy of Carbonate Reservoir with Condensate Gas Cap
Hydrocarbon Accumulation Conditions and Reservoir Characteriscs of Shahejie Formation in Tangzhuang Area
Influence of Scaling in Alkaline/Surfactant/Polymer Flooding Surface Process
Influencing Factor Study of CO2-Assisted Gravity Drainage in Extra-Low Permeability Reservoir
Job Safety Analysis Model of Great Wall Drilling Company Mud Logging Operation
Joule-Thomson Effect on Heat Transfer in CO2 Injection Wellbore
Numerical Simulation of Stimulated Volume in Low-Permeability Reservoir
Oil Containment by Floating Boom under Wave-Current Coupling Condition II: Containment Failure
Regional Estimation of Block Oilfield Rock Physical Parameters
Research on Coupled Flow in Deformation Medium Reservoir with Cave
Research on Efficient Microbial Enhanced Oil Recovery Technology Based on Low-Temperature Heavy Oil
Research on Residual Oil Distribution Regular of Steam Flooding after Polymer Flooding
Research on Result Prediction of Coal-Bed Gas Wells Fracturing by Using Expert System
Research on the Control Method of High Power APF for Oil Drilling Rig
Research on the Controlling Factors and Grate Prediction of the Output of Pulverized Coal in Hancheng Block, Eastern Ordos Gas Field
Study on CO2 Injection for Enhancing the Oil Recovery at Gao89 Block in Shengli Oilfield
Study on Streamline Distribution of Horizontal Linear well Pattern in Anisotropic Reservoirs
The Application of Non-Acid Plug Removal Technology in Sandstone Formation
The Application of Seismic Sedimentology in Prediction of Channel Sand in Pu I Formation, Gaotaizi Oilfield
The Research for Delaying the Bottom Water Coning in Horizontal Wells Application Balance Screen Pipe
The Research on Improving the Efficiency of Injection-Production of the Lamadian Oilfield in Ultra-High Water Cut Stage
The Research on Steering Fracture Numerical Simulation
The Stress Calculation of Sidewall Rock in Hydraulic Fracturing Basing on Damage Theory
The Study and Application of Massive Hydraulic Fracturing Technique in Y104-6 Well Glutenite Formation
The Study of the Start and Stop Cycle of the Gathering and Transportation by Electrical Heating
Chapter 5: Metallurgical Engineering
Study on Amplitude of the Surface of Liquid Steel in Bottom-Blowing Ladle with Immersed Tube
Balance of Raw Input and Energy of Titanium Slag Smelting in Closed High Power Direct Current Electric Arc Furnace
Effect of Na2SO4 on the Decomposition Rate and Product Size in Seed Precipitation Process
Effect of Na2SO4 on the Salt Discharge from Sodium Aluminate Liquor
Effects of Ce or Nb Addition on Nucleation of Pearlite in High Carbon Steel
The Influence of Electro-Deposition Time to the Distribution of Silicon in Ferrosilicon Alloy
Characterization of Preparing Cold Bonded Carbon Bearing Pellets of Metallurgical Dust for Direct Reduction
Particles Movement Simulation of Screw Transporting in Rotary Kiln
Preparation of Alumina from Fly Ash by Sulfuric Acid
Study on Nickel Nanopowders Prepared by Arc Plasma
Chapter 6: Urban and Regional Planning
Relationship between Irradiation Direction of the Light Source and Direction of Visual Axis
A Critical Assessment of the Sustainability Performance of a Typical Mega City in China - A Case Study of Jinan
A Framework for the Study of Urban Space Form Oriented Toward Low-Carbon Travel
Development of an Evaluation Model for the Level of Rail Transit Service
Development of an Evaluation Model of Freeway Traffic Safety Facilities System
Discussion on the Characters and Problems of the Slow Traffic System for the Technological Development Zone
Research on Economics and Traffic Survey City Area
Research on Public Bicycle Rental Station Layout
A Study to Setting Function of Queuing Discipline in Highway Tollgate
Study on the Number of Berths of Road-Side Bus Stop
A Portable Subway Logistics System for the Transportation of Small and Medium-Size Cargo
Application of Catastrophe Theory in Traffic Flow of Highway Tunnel Group
Efficiency Rating of Vision in Terms of Prevention of Road Accidents at Work
Research on the Real Options in Investment Decision of Waterway Infrastructure Construction
Study on Development Pattern of Public Transportation in Fuzhou City
Study on the Application of CVM in the Social Benefits Valuation of Urban Mass Transit
Study on Urban Emergency Event Forecast - Taking Urban Traffic Accident in China as Example
The Research on Local Transport of Goods which by the Means of City Subway
The Role and Development Prospects of the Ropeway in Urban Transport System
Chapter 7: Development and Management of the Energy and Power Industry
The Logistics Risk Assessment Studies of the Large Equipment of Hydropower Project Based on Three-Dimensional Structure
The Decision-Making Optimization Model of 3E System Based on the Entropy
A Review of Influential Factors and Evaluation Models of Energy Efficiency in China
An Empirical Analysis of the Relationship between Economic Growth and Energy Utilization in China
Comprehensive Use of Renewable Energy in Building
Conflict of Coal and Electricity Price's Impact on National Economic Development
Electricity Consumption Analysis Using Demographic Variables Case Study - Nakhonratchasima, Thailand
Empirical Analysis on Total-Factor Energy Productivity Growth in China with DEA Method
Industrial Structure Adjustment, Technology Innovation and Energy Efficiency Improvement - An Empirical Analysis Based on the Statistical Data of Hubei Province
Multi-Objective Evaluation Method of Thermal Power Enterprise Cost Effective Research
Research on the U.S. Coal Cupply-Demand Network
Study on the Transition to Low-Carbon Electricity in Coal Industry in Shandong
The Main Energy Problems and the Countermeasures of the Economic Development in China
An Improved Historical Simulation Method to Estimate the Amount of Refined Oil Retail Value at Risk VaR
Analysis for the Global Demand of Energy in the next 20 Years
Analysis of Social Total Cost of Thermal Power and Nuclear Power
Applying ARIMA and Fuzzy Logic to Predict the Electricity Spare Parts Demand
Chapter 7: Development and Management of the Energy and Power Industry
Dynamic Transmission Power Control Mechanism for Maximizing Energy Efficiency of WLAN
Evolution of Carbon Emission of Fossil Fuel Final Consumption in China: Industrial - Spatial Perspective
Renewable Power Generation Management: Case Study - Nakhonratchasima Province, Thailand
Spatial Pattern Evolution of Coal Consumption at Provincial Level in China
Study on the Evaluation Index System of Regional Energy Use Efficiency
Study on the Evaluation of Electricity Market Operational Efficiency Based on Synergetic Theory
Study on the Mechanism for Profit Distribution in Energy Supply Chain
The R&D Trend of New Energy and Energy Development Strategy in Hebei Province
Chapter 8: Global Climate Change and International Cooperation on Reducing and Control Carbon Emissions
Greenhouse Gas Inventory for Energy Sector of Khon Kaen Province, Thailand
A New Improved Decomposition Model Based on Laspeyres Index: A Case of CO2 Emission in China from 1996-2011
Allocation of China's Carbon Emission Right Based on Different Perspectives
Analysis about CO2 Emissions Related to Household Consumption
Analysis on Chongqing's Carbon Balance Based on Carbon Footprints
CH4 Emissions Reduction Potential of Rice Paddy Ecosystem in South Jiangsu Province
Comment on Credible Terrestrial Carbon Market Mechanism and Future Development
Green Resources, Environmental Technology Innovation and the Green Firm-Specific Advantage of High-Carbon Enterprises
Research on SO2 and CO2 Emission Characteristics and Emission Efficiency in China
Research on the Barriers and Strategies of IPRs for LCT Transfer
Research on the Establishment and Operational Mechanism of Forest Carbon-Sink Market in Coal Industry
The Assessment and Reduction Approaches of the Carbon Emission in Jiangmen, China
Renewable Energy and Carbon Footprint Emission at University Technology Malaysia (UTM)
Assessment of the Trend of Albedo: A Case Study of Palermo
A Study on the Effect of Climate Change Initiative in Reducing Greenhouse Gas in Home Heating Sector in South Korea
The Development on Production Mechanism and Influence Factors of CH4 Exchanging Flux from Grassland Ecosystem
The Influence of Grazing Intensity on Exchanging Fluxes of Nitrous Oxide, Methane and Carbon Dioxide from Grassland
Evaluation of Post-Combustion CO2 Capture Technologies
Calculation of Global Warming Potential and Environmental Cost Depending on Recycling Option of Destruction Waste Wood
Analysis on Emission Reduction Targets of Carbon Dioxide in China
Analyzing the Driving Effect of Influence Factors on CO2 Emissions Using the STIRPAT Model in Tianjin of China
Calculation of Terrestrial Carbon Sink Capacity in Dongying City, Shandong Province
CO2 Storage Capacity Assessment of Deep Saline Aquifer in Central Depression of Songliao Basin
Driving Factors Analysis of Carbon Dioxide Emissions in China Based on STIRPAT Model
International Experience and Enlightenment of Energy Saving and Emission Reduction in Logistics Industry
On Establishment of Incentive Mechanism of Energy Conservation and Emission Reduction for Enterprises in Jilin Province
Research on Energy Saving and Emission Reduction Countermeasures for China's Logistics Industry
Research on Land Use Carbon Emissions Empirical in Guangdong Province
State of the Art in Low Carbon Community Development
Study on the Carbon Balance Trading under the Framework of Ecological Compensation
Synergetic Abatement of Carbon Emissions and Air Pollution in China
The Comparative Study of China's Low Carbon Pilot Provinces CO2 Emission Characteristics and Influence Factors
The Impact on Carbon Emissions of Xinjiang's Population Structure
Structure Decomposition Analysis of the Carbon Footprint Differences between Beijing and Tianjin
Chapter 9: Ecological Economy, Circular Economy and Low-Carbon Economy
Research on the Construction of Domestic Ecological Civilization Cities
Construct Evaluation Index System of Low-Carbon Economy & Development Ability
The Barriers and Countermeasures of Implementing Ecological Poverty Alleviation in Concentrated Poverty Areas
The Construction of Evaluation Index System on China`s "Two-Oriented Society" and Empirical Study
Building a System Dynamic Model of Regional Low-Carbon Development
Development and Utilization of Mineral Resources Based on Circular Economy in Southern Jiangxi
Errors and Solutions of Developing Circular Economy in Coal Enterprises
Low Carbon Development Research on Coal Enterprise - Xinwen Group as an Example
Low-Carbon Economy: Essential Route of Sustainable Development of Shaanxi Economy
Promote Low-Carbon Economic Development by Implementing Low-Carbon Marketing
Research on Reverse Logistics System of Energy-Intensive Industry Based on Circular Economy
Researches on Problems and Countermeasures of Low-Carbon Economy in China
Study of System Dynamics on the Equilibrium Development of Ecological and Economic System in Ordos of Inner Mongolia in China
Study on Low Carbon Product Design from the Perspective of New Lifestyle
Study on Low-Carbon Development to Transform and Improve Electric Power Industry in Shandong Province
Research on the Relation between Corporate Social Responsibility Practice and Financial Performance under the Low Carbon Economy - From the Case Analysis of CNPC
Algorithm and Simulation of Chinese Traditional Industrial Clusters Low Carbon Evolution Based on Evolutionary Games Theory on Complex Networks
An Application of Ecological Compensation Mechanism Framework: A Case for Yulin County
Dynamic Assessment of the Development of Circular Economy of Ningbo City, Zhejiang Province
Research on Development Patterns of Low-Carbon Economy in China
Study on Development Status and Countermeasures of Low-Carbon Tourism in Heilongjiang Province
Study on the Path to Executing Eco-Engineering and Circular Economy in the Resource Enterprise
Tangshan City Marketing Strategy Research Based on Low-Carbon Economy
The Study on the Low-Carbon Transformation and Sustainable Development of the Resource-Based Cities
Chapter 10: Engineering Materials and Processing Technologies
FTIR Analysis of the Lignin Structure Changes of APMP Treated by Laccase and Laccase / Mediator System
New Strength Agent: Corn Stalk Pulp Applied on Package Board
Synthesis and Antioxidant Activity of Carboxymethyl Chitosan-Selenium
The Evaluation of Lignin Structure Changes of both pH4 and pH2 from Hardwood Dissolved Soda-AQ Lignin by 31P-NMR
Using Controlled Graft Copolymerization Technology to Prepare Structure-Controllable Cellulose Functional Materials
Intercalation of Gelatin in Monohydrate Zirconium Hydrogen Phosphate
Numerical Simulation of Thermal Sensitivity for Explosives
Synthesis of Dimethyl Carbonate from Carbon Dioxide, Propylene Epoxide and Methanol
The Effect of Thickness on the Properties of TGZO Thin Films for Optoelectronic Devices
One Step Synthesis of ?-Caprolactam from Cyclohexanone and Hydroxylamine Catalyzed by SO3H-Functioned Ionic Liquids
Study on the Elemental Analysis and Relative Molecular Weight of 5U Rock Asphalt
Synthesis and Properties of Dispersive Type High Temperature Filtrate Reducer Used in Oil Well Cement
Preliminary Study of Preparation and Properties of Activated K-Feldspar-Filled Hydrogel Materials
Preparation and Characterization of KGM/PVA Composite Nanofibrous Membranes

Fabrication and Photocatalytic Performance of SnO2 Prepared under Ultrasonic Vibration
Characterization of Nickel-Antimony Doped Tin Oxide Electrodes Prepared via Sol-Gel Dip-Coating Method
Copolymerization of Carbon Dioxide and Propylene Oxide Catalyzed by Salen Complexes
Photocatalytic Decomposition of Methylene Blue with Lanthanum Doping TiO2 under Visible Light Irradiation
Physicochemical Characterization of the Magnetic Fe3O4/MO-Intercalated-Layered Double Hydroxide Composite
Preparation and Characterization of Poly(Vinylidene Fluoride) Hollow Fiber Membranes via Modified Thermally Induced Phase Separation Process
Preparation and Characterization of Self-Healing Microcapsules Containing Two-Component
Preparation and Characterization of the C2H5COOH-Graphite Intercalation Compound
Preparation of PVB/ ?-CD/Silica Nanofibers Using Electrospinning Techniques
Preparing and Applying of Flame Retardant Microcapsules Containing Magnesium Hydroxide
Research Progress on Surface Coating of Magnesium and its Alloys as Biomedical Materials
Synthesis and Catalysis of Fe3O4 Nanoparticles for Degradation of Rhodamine B
Synthesis and Photocatalytic Activity of Ag-Doped BiVO4
Effect of Porous-Jump Model Parameters on Membrane Flux Prediction
Inhibition of Corrosion and Scale Formation in Oilfield Produced Water Recycling System
A Review on the Use of Chitosan and its Derivatives as Radical Scavenger and Metal Ions Chelating Agent
Investigation into Acceleration Efficiency of Ultrasound in Dyeing Process
Technique of Instantaneous Ultrasonic Extraction and Reverse Osmosis Concentration on Polyphenols of Chinese Herbs
Research on the Influence of the Tension on Dielectric Strength of the Unidirectional Direction Glass Fiber Reinforced Composites
A Preliminary Study of the Carbon-Based Solid Acid Preparation Process
An Efficiently Brominated Flame Retardant Composed of Decabromodiphenyl Oxide and Antimonous Oxide for Long Glass Fiber Reinforced Polypropylene
Application of Energy-Saving Magnesium Alloy in Automotive Industry
Comprehensive Utilization of Resources of Titanium Dioxide at Home and Abroad
Effect of CaCO3 Particle Size and Size Distribution on Rheological and Mechanical Properties of Polyethylene
Effect of Oxygen Partial Pressure on Formation of Fe2O3 Nanostructure during Thermal Oxidation
Effect of Pulsed Electric Fields on the Antibacterial Activity of Ovotransferrin and Mechanism of Action
Effects of Dipping Pretreatment on the Flame Deposition of Carbon Nanostructure on the Low Carbon Steel Substrate
Efficient Organe Organic Light-Emitting Devices Using N-arylbenzinmidzoles as Blocking Layer
Enhanced Photocatalytic Performance of SnO2 Doped with Fe2O3
Hydrogen Peroxide Bleaching to Wine Corks with a Novel Catalyst
Impact of Rheological Properties of Fiber Asphalt Mortar on Mixture Road Performance
Laboratory Investigation of Pavement Performance of Warm Mix Asphalt with Different Addition Methods
Loading of HgS Nanoparticles on the Silica Microspheres
Mechanical Properties of a Novel Kind of Biomass Cellular Material Prepared from Forage Grass
Numerical Study of Dynamic Crack of 1D Hexagonal and 3D Icosahedral Quasicrystals
On the Calculation of Effective Anisotropy Constant of Nanoparticle
One-Pot Synthesis and Visible Light Photocatalytic Activity of AgIn5S8/AgInS2 Composite
Overview of the Development of Consolidation Theory of Unsaturated Soils
Preparation of Nanosized Strontium Titanate Powder by a Nitrilotriacetate Precipitation Method
Preparation of PST Ferroelectric Thin Films by Sol-Gel Process
Research of Anti-Corrosion of Armour Steel in Surface Chromate Conversion Coating
Research of Nano-TiO2 Composites on Malachite Green Decolorizing Effect
Research on Virtual Manufacturing of Chain Rolling Cold Bend Section Steel Model
Study on Corrosion Resistance and Mechanical Property of Welding HAZ Treated by Laser Surface Remelting
Study on the Enhanced Visible Photocatalysis Activity in Transition Metal Doped ZnS
Study on the Properties of Geocement Based Thermal Insulating Materials for High Temperature Technical Appliances
The Influence of Fe3+ Doping on the Crystallization of TiO2 and their Photocatalytic Activity
The Reduction Properties of Hexa Aluminates Substituted by Different Metal Ions for Denitrification System
Wear Behavior of Mg Alloy Procduced by Equal Channel Angular Extrusion
Structure Studies on Order Assemblage of Nickel II Complexes
The Analysis of the Film Morphology
Silver Co-Doping Effect on the Antimony Doped Tin Dioxide Electrode
An Experiment Study of the Effect for the Fuel Additive Using in Fishing Vessels Light Diesel Engine Performance
Influence of Ti-Doping on the Thermoelectric Properties of ZnO:Al Thin Films
Research on Preparation of New Aluminum Silicate Fiber Adiabatic Paper
Study on Electrochemical Flotation of Low Rank Coal Macerals
Study on Electronic and Optical Properties of Al-Doped ZnS from Density Function Theory
Study on Supercapacity Properties of Manganese Dioxide Active Material by the Cation Concentration Change on the Electrode Surface
Synthesis and Thermal Conductivity of ZnO Nanofluids
Thermochromic Properties of VO2 Films Deposited on Quartz Glass
Gold Nanoparticle Resonance Rayleigh Scattering Spectral Determination of Trace Au (III)
Preliminary Study on the Electrolysis of Titanium Oxysalt
Electrification Theory and Experimental Research of Aluminum-Based Metallic Material
Sediment from the Yellow River Salvaging as Glass-Ceramics
One Method for Estimating Normal Contact Stiffness with Raand Adhesion Rate
3D Modeling Based on Multiscale FE Analysis of Irregular Porous Materials
A New and Sensitive Hydride Generation-Nanosilver Resonance Rayleigh Scattering Spectral Method for Trace Se (IV)
A Performance Study of Self-Piercing Riveting of Aluminum and Copper Alloy Sheets
Analyzing on the Reasonable Composition of High-Chromium Alloy Cast Iron to Make the Mud Pump Shell of Dredger
Carbon Fiber Application Analysis in the Apparel Field
Characterization and Performance of SO42- / SnO2 / MCM-41 for ?-pinene Isomerization
CIGS Thin Film: Synthesis and Characterization
Comparison Friction and Wear Properties of Overbased Calcium Sulfonate Complex Grease and Polyurea Grease
Influence of Technological Parameters on Sheet Metal Punching Section Quality
Post-Annealing Effects on the Surface Roughness of Undoped and Al-Doped ZnO Thin Films Deposited by Atomic Layer Deposition
Preparation of High Purity Alumina Technology Overview
Rheological and Thermal Properties of Blends of Recycled LDPE and Virgin LDPE
Spontaneous Formation of DTAB/SDBS Vesicles
Study on the Performance of Cool Storage Material for Vaccine Transportation
Study Pressure-Cyanide Dissolution Different of Metal Palladium and Platinum Powder
Superhydrophobic Film Make up of Corrosion Aluminum Plates and Polypropylene Coated
Synthesis and Electrochemical Performance of Spinel LiMn2O4 Modified by CNTs
Synthesis of Anatase/Brookite Mixtured TiO2 Nanoparticles by a Chimie Douce Technique
Synthesis of Di(Chloroethyl) Phosphite
Synthesis of High-Quality MCM-41 Using Silica Fume as Silica Source
Synthesis of LiFePO4/C Composite Cathode Materials by Solid State Method Using Mixed Iron Sources
The Characterization of CIGS Thin Films Prepared by Ion Beam Sputtering Deposition from a Quaternary Target
The Laboratory Evaluation of Several Polymer Solution Performances
The Synthesis and Crystal Structure of a New 1-D Co (II) Complex Based on Boronic Acid Ligand
Chapter 10: Engineering Materials and Processing Technologies
Thermoelectric Characterization of Direct Current Magnetron Co-Sputtering Zinc Antimonide Thin Films
Transformation Behaviors of U(VI) on Irons Hydroxide Colloids
VO2 Thin Films Deposited on ZnOBuffer Layer
Working Pressure Dependence of Structure and Optical Performance of Zinc Oxide Thin Films by Magnetron Sputtering
Prepared for Potassium Sulfate of the Orthogonal Test in K-Feldspar-Phosphogypsum-Coke System
Chapter 11: Equipment Design, Manufacturing, Automation and Control
Modeling and Application of Coal Pulverizing System for Coal-Fired Power Plant
The Improvement of the Circuit of Low Power in Yellow River Diversion Project
Experimental Studies on Transmission Characterization of Stratified Earth Channel in Through-the-Earth Communications with Elastic Wave
Testing Apparatus Design of High-Concentration Slurry Transport in Environment-Friendly Dredging
A Telemetry and Telecontrol Universal Simulator
Automation Control Method of Time-Varying in Heat Conduction Coefficient and Pure Steam Output Interference
The Extraction and Identification of Target Infrared Image Signature Based on Instantaneous Polarization
UM2000 Spectrum Estimation Using Multiple Signal Classification Method
Research Status of Broken Belt Protector in Belt Conveyor
Algorithm Study of the Models Merge Based on Delaunay Triangulation
Analysis of Variable Section Piezoelectric Harvester
Automated Design of Mechanical System for Generating Alternate Mechanism Concepts
Multiparametric Monitoring of Rotating Parts of Mechanical Devices
New Construction Machinery Developed in Ultra-Deep High Pressure Jet Grouting Pile
Optimization Design of the Odometer Gear Pair
Permafrost Hazard of MoHe-DaQing Crude Oil Pipeline
Research and Development of Gravitation Electro-Galvanizing Testing Apparatus
Research of Mine Ventilation Parameters Tester Based on ZigBee Technology
Research on the 6DOF Robot Simulation and Modeling
Study and Development on Safety Operation of Marine Pump
Study on Assembly Design Approach Based on Synchronous Modeling Technology
The Analysis on Influence of Test Error of Voltage Transformer Primary Test Circuit Causes on GIS and the Improvement of Test Method
The Designment of Double-Roll Cake Breaker
The Fuel Consumption of the Integrated Piston-Plunger Pump
The Programming Model about Petroleum Pipeline
An Automatic Light Communication System for Vessel
Fault Diagnosis System of Large Wind-Driven Generator Based on Virtual Instrument
Kinematics Analysis of the Eccentric Swing Paper Transfer Mechanism
Study on the Shift Schedule Based on Driver Type of Automatic Mechanical Transmission
Automotive Interior Parts Molding Process Simulation and Parameter Optimization
PHD Filter for Multi-Radar Multi-Target Tracking
A Review on the Development of High Pressure Roller Mill
Transform Three Mechanical Stepless Simulation Darkening Welding Helmet Design
Civil Unmanned Aircraft System Maintenance Structure
Design and Research of Environmentally Compound Deicing Techniques
Engine Hood Lightweight Optimization Design Based on Overall Satisfaction
Evaluation on Parallel Assembly Sequence
Key Component Design of Environment-Friendly Jujube Takes Core Machine
Proposing a Revised Definition of Perpetual Motion Machine
Research on Green Manufacturing-Oriented Packaging Design Technology
Research on Micro-Heater Based on Pt-100
Study of Computer Aided Process Planning Base on B/S Structure
Study on Bolt (Cable) Supporting Design Method Based on Tunnel Fall Hidden Dangers Classification
Study on Redundant Constraint in Mechanism Design
Study on Structure Optimization of Multi-Wavelength Brillouin-Erbium Doped Fiber Laser
The Galloping Parameters Study of Ice-Coating Transmission Line
The Progress of Finite Element Analysis on Internal Combustion Engine Cylinder Head Assembly
Deployment of Wireless Sensor Network for Gas Leak Monitoring
Design of Outdoor Vehicles Computer Dispatch System Based on GPS
Moving Vehicle Detection of Airborne Video on SURF
Research on Direct Wave Separation of PD Ultrasonic Signal Based on ICA
The Design on Temperature Monitoring System for Traditional Fermentation Process Based on WiFi
Chapter 12: Information Technologies, Computer and Data Analysis Applications in Industry and Engineering
Aluminum Reduction Cell's Fault Monitoring Based on LS-SVM
Based on the AVR Micro Controller's Serial Communication Protocol Implementation
An Application of Rectilinear Embedding in VLSI Placement
Substation Inspection System Based on RFID Technology
Numerical Study of Koyna Dam Failure Process Using Extended Finite Element Method
A Algorithm of Three-Dimensional Human Face Pose Correction Based on the Normal Vector Alignment
A Design and Development of Chongqing Emergency Warning Information Releasing Software
A MapReduce Telecommunication Data Center Analysis Model
A Matching Theorem in GFC-Spaces with Application to Saddle Points
A New Automatic Modulation Classifier Using Swarm Intelligence-Trained Neural Network
A New Particle Swarm Algorithm for Solving Constrained Optimization Problems
A New Type of Deaf-Mute Sign Language Recognition System Based on the Mobile Communciation Platform and Terminal Equipment
A Novel Approach on Automatic Building of Word Correlation Net Based on Statistic
A Preprocessing Algorithm of Corn Infrared Spectrum Based on MSC and DOSC
A Review of TFT-LCD Panel Defect Detection Methods
A Routing Protocol for Solar Energy Harvesting Wireless Sensor Networks
An AFC System of Digital Scenic Areas Based on Decision Tree Classification
An Image Segmentation Method Based on Adaptability Threshold
Analysis on the Target Distribution Equivalent of the Anti-Ship Missile
Application of BP Neural Network in Coalmine Safety Management Performance Evaluation
Application of Improved LMD in Gear Fault Diagnosis
Approximate Processing Method of Random One Direction Singular Rough Sets
Approximation of Missing Values for Classification and Regression
Data Acquisition System Connect to CMG-3T Low-Frequency Seismic Pendulum
Detection of External Defects in Steel Wire Rope Based on Image Processing
EMLDC: An Efficient Method of Long Data Communication for the L4 Microkernel-Based Virtual Machines
Graph Traversal Dynamic Demonstration System Design and Implementation
Ground Target Tracking Using Aerial Images
Improved Fingerprint Recognition Algorithm Application Study on Smart Home
Labelling Properties of Special Models Related with Networks
Multi-Classification Combination Algorithm Based on Logit Model and Support Vector Machine
Research on Foreign Body Detection for Granular Material Based on Feature Weighted OCSVM of Color Recognition
Research on Jiangxi Tourism E-Commerce Platform Construction
Research on Session Replication Schemes
Research on SVM Cell Concentration Prediction of Erythromycin Fermentation Process Based on Ant Colony Optimization
Serial Communication Based on LabVIEW for the Development of an ECG Monitor
Solutions for a Class of Elliptic Equation
Study of Scale-Down Method for Dense Grid Points
Study of Sensor of Electrical Capacitance Tomography (ECT) System Based on COMSOL
Teleportation of an Unknown Three-Particle Entangled State via a Cluster State
The Implementation of Visualization Software of the Rapid 3D Apparent Physical Properties Inversion Method
Three Jiaohe Coal Mine Safety Information Management System Design Scheme
Venture to Achieve Automated Mapping with ArcGIS-Based MESIS
An Enhanced Cross-Layer MAC Design for Energy Efficiency in Wireless Sensor Networks
A Comparative Analysis of Shipping Emissions Estimation Methodologies and their Applicability
A Fault-Tolerant Data Center Network Structure
A Gesture Recognition Algorithm Based on PCA and BP Neural Network
A New Piecewise Rational Reparameterization Method
A Novel Algorithm for Classifying Measuring Curves Based on Interval Estimation
A Procedure to Evaluate the Indoor Global Quality by a Sub Objective-Objective Procedure
A Target Selection Algorithm of Seeker Based on the Prior Information and SVM
Algorithm for Imaging Sonar Target Detection based on Geometry Characteristic and SVM
An Anhydrous Bridge Recognition Algorithm in Aerial Image
An Automatic Cloud Service Platform for Learning from Large-Scale Data
Application of the Technology of Multi-Source Information Fusion in Industrial Monitoring and Fault Diagnosis
Application Research of Improved Ant Colony Algorithm in Hybrid Mobile Agent Routing
Approximating Nash Equilibrium Using Genetic Algorithm
Boundary Variable Precision Dominance-Based Rough Set Approach in Multicriteria Sorting Problems
Clustering Routing Protocol Based on Base Station Authentication with TLEACH in WSN
Design and Implementation of Operation Limited Linear List Visualization Demo System
Development of Digital Vehicle Information Terminal Hardware System
Fuzzy AHP-Based Algorithm for Performance Evaluation of New Socialist Countryside in Northwest Minority Regions of China
Hybrid File System - A Strategy for the Optimization of File System
Mathematical Constraints Representation for Bottom-Up Approaches to Climate Policy Modeling
Mathematical Models for 3D Reconstruction Using Surface Triangulation
Monte Carlo Simulation on Conformation Properties of Polymer Multiple Chain System
Nonlinear Analysis of Drivers Heart Rate Variability on the Prairie Highway
Pheromone-Based Ant Colony Algorithm for Optimal Proliferation of Research
Preliminary Study on Digital Signature Technology and Application
Realization of the Multi-Factor Combined Information Value Model in the Spatial Prediction of Landslides
Research on Security Strategies of Digital Library Based on Cloud Computing Platform
Research on the Mapping Rules of Complex Inheritance Relationship from CIM to the Logic Model
Research on Various Algorithms in Asynchronous Network Communication System
Robust Kalman Filtering for Descriptor Systems with Unstructured Uncertainties
Smart Detection Technology of Serial Arc-Fault on Low Voltage Power Lines
Structure and Analysis of Certificateless Proxy Blind Signature Scheme without Bilinear Pairing
Studies on Key Problems of Wavelet Transform of Face Recognition
Studies on the Secure Routing Protocols of Mobile AD Hoc Networks
Study on Distributed Architecture, Information Integration and Access Control of Manufacturing Execution System
Study on Location Based Services Driven Mobile E-Commerce System
The Design of the Logistics Information Sharing Platform Based on Cloud Computing
The Properties of Analogous to Dedekind Sums
The Research and Implementation of an Electronic Seal System Based on CAPICOM
The Research of Covariance Matrix by the Nature of Bilinear Function
RETRACTED: The Realization of Communication between AB SLC500 and Profibus-DP Network
A Composite Pulse Modulated Signal Compression and DSP Implementation
Performance Analysis of Radar Pulse Compression Signals
Vehicle License Plate Location Based on High Frequency Vertical Edge and Mathematical Morphology
Chapter 13: Engingeering Management, Logistics and Education
Research on Diffusion of Warning Based on Multi-Agent Modeling
Research on Integrated Fire Danger Index Application Based on Ignition and Fire
Research on Risk Management in Urban Subway Construction
Assessment of the Influence of Binhai Lng Project on Regional Economic Development in Jiangsu Province
Study on the Forecast of the Economic Loss in Storm Surge Disaster Based on Fourier Series - A Case Study of China
Research on Scientific and Technological Innovations Promoting on the New Round Economic Structure Adjustment of Liaoning
Study on the Tourism Value Evaluation of the Urban Industrial Heritage on the Basis of Matter-Element Model
SWOT Analysis and Countermeasures Research on the Development of Turpan Sand-Therapy Tourism Resources
An Estimation Method of Time-Varying Beta in Price Limiting Mechanism
Brief Discussion of Comtemporary College Student's Network Security Education Issues
Education of Low Carbon and Cultivation of Social Responsibility
Research on Seaport Cluster Strategy of Qingdao Ports Based on SWOT Analysis
The Method Research of Production Enterprise Logistics System Integration
A Brief Analysis of Global Rare Earth Trade Structure
Compound Option Pricing Model Applied in Overseas Mineral Investment
The Study of the Relationship between Natural Resource Abundance and Economic Growth
The Evolution of the Investment Environment Field: A Content Analysis of 12 Years of Investment Environment Research Papers
Developing of Organisational Culture as a Presumption of Industrial Enterprise Performance Optimization
Engineering Management on Modeling of Environmental Protection
Research on Cultivation Model for Logistics Talents of Universities in Ningbo: A Case Study of Zhejiang Wangli University
Study on Evaluation Method of Corporate Social Responsibility Based on Fuzzy Consistent Matrix
Study on Measurement Method for Flexible Management Effect of Project Schedule under Construction Supply Chain Mode
The Governmental Supervision Responsibility and Standardization Construction of Construction Quality
The Impact of Technological Regimes on the Establishment of Technological Standards
Undergraduates' Innovation Ability Training Based on Scientific Research Base