Advanced Materials and Engineering Materials X

Preface1
Preface2
Chapter 1: Properties and Processing Technologies of Steel and Alloys
Increasing the Efficiency of Production of Synthetic Cast Iron Castings
Numerical Simulation of the Influence of Different Surface Morphologies on Molten Pool Flow under Moving Heat Source
Experimental and Numerical Examination on Formability and Microstructure of AA3003-H18 Alloy in Single Point Incremental Forming Process
Influence of the Different Combination of Diameters of Two Tool Heads on Forming Quality in Double Sided Incremental Forming
Effect of Frictional Conditions in Deep Drawing on Formability
Microstructure Evolution of AlSn20Cu Alloy Prepared by Conventional Casting and Semi Continuous Casting during Rolling and Annealing
Effect of Pouring Temperature on Microstructures and Mechanical Properties of 7085 Ingot Casting by Finite Element Analysis
Coarse Columnar Dendrites of GH3039 Nickel-Based Alloy at Diverging Grain Boundaries during Wire and Laser Additive Manufacturing: A Phase Field Simulation
Effects of W Addition on Microstructure and 650 degreesC Mechanical Properties of Ti-Al-Sn-Zr-Mo-Nb-W-Si Alloy
Investigation of the Effect of Modifying the AlSi7Mg0.3 Alloy with a Fast-Cooled Master Alloy Using Heat Treatment
Microstructure Evolution of AS41 Magnesium Alloy in ECAP
Effects of Heat Dissipation from Friction Stir Welding to Microstructures of Semi-Solid Cast 6063 Al Alloy
Effect of Pre-Aging on Properties of CuCrSn Alloy during Rolling and Aging
Effect of Twice Stablizing Heat Treatment on the Properties of 347H Stainless Steel
Effects of Stabilizing Heat Treatment on Properties of Simulated Microstructures in the Heat-Affected Zone of 347H Stainless Steel
Effect of Tempering Temperature on Microstructure and Corrosion Resistance of Plastic Mould Steel S136 SUP
Hydrogen Diffusion Influence on the Stabilizing Phases Behavior in the Ti-6Al-4V Alloy
Kinematic Viscosity and Electrical Resistivity of a Multicomponent Melt due to Liquid-Liquid Structure Transition
Influence of High Temperature Annealing on Microstructure Evolution of Ni-24Fe-14Cr-8Mo Superalloy
Effect of Heat Treatment Conditions on Microstructures and Mechanical Properties of Cu-9Ni-6Sn-0.22Nb Alloy
Life and Flaking Failure of 13Cr-2Ni-2Mo and SUS440C Stainless Steel Bearings in Water
Casting of Wire Using a Twin Wheel Caster
Effect of Cold Rolling on the Microstructure and Mechanical Behaviors of High-Nitrogen and Low-Nickel Alloy
Study on Mechanical Properties of Lost Foam Pattern in Machining
Study on Microstructure and Properties of Welded Joints with Low Strength Backing Layer for WELDOX960
Chapter 2: Polymers and Composites
Measuring and Testing Composite Materials Used in Aircraft Construction
Experimental and Modeling Study on High Velocity Penetration of a Carbon/Epoxy Composite Laminate
The Effect of Sintering Profiles on Zirconia Toughened Alumina (ZTA) Prepared by Two-Stage Sintering
Study on Test Methods of Tensile Properties of Continuous Alumina Fiber Bundles
The High-Temperature Tensile Test of Quartz Fiber Fabric- Reinforced Resin Composites
Thermoplastique Degradation under Heat and Irradiation
Exploration of Thermal Degradation Kinetics of Epoxy Resin Composites
Effect of Eggshell Powder Using for an Extender on the Mechanical and Thermal Behaviors of Polylactic Acid Composites
Powder Injection Moulding and Liquid Phase Sintering of Aluminium - SiC Particulate Composite
Effect of Rice Flour Types on the Properties of Nonwoven Pineapple Leaf Fiber and Thermoplastic Rice Starch Composites
Improving Study on Wear Resistance and Mechanical Properties of Graphene / Polyurethane Microfoam Composites
Effect of Short Banana Fiber on Hardness and Tensile Properties of Natural Rubber Composites
Microscopic Study of Coated Carbon Fibre Reinforced Copper Matrix Composite Samples
Influence on Tribological Behavior of PEEK Composite Film Layer on PEEK-PTFE Bearings with Artificial Defect in Dry Condition
Effect of Corn Straw Addition on Mechanical Properties of Polyvinyl Alcohol Hydrogel
A Study on the Mechanical Properties of 3D Printed PLA Specimens According to Infilled Pattern and Printing Direction
Experimental Study of Tool Wear when Milling Tropical Wood with Various Tool Materials
Distributions of Stress and Interlaminar Shear Stress in Laminates under Normal Load
Chapter 3: Materials for Biomedical Application
The Effect of Resin-Based Dental Sealant Containing Vanillin on Biofilm Formation of Candida albicans
Anti-Biofilm Formation of an Adhesive Containing Calcium Salts of Acidic Monomers against Oral Candida Related to Root Caries
Coating of Polystyrene Surface with REDV-Gelatin Conjugate for Selective Isolation of Endothelial Cells
Antibacterial Effect of Gold Nanoparticles Coated Dental Floss against Cariogenic Bacteria
Antibacterial Effect of Experimental Orthodontic Adhesives Containing Gold Nanoparticles against Streptococcus mutans and Streptococcus sobrinus
The Effect of Raw Materials on the Properties of Oxidized Cellulose Nanofibers from Bacterial Cellulose
A Study on Nano-Flow Control of Bio-Inspired Nanosized Ion Channel
Large-Scale Synthesis of Glutathione-Coated and 68Ga- Labeled Gold Nanoclusters for PET/CT Imaging of Tumors
Chapter 4: Ceramics, Functional Materials and Special Technologies
Preparation of M2SiO4:Tb3+, Mn2+, Nd3+ White-Emitting Phosphors (M = Mg2+, Ca2+, Sr2+, and Ba2+) and the Influence of M2+ Cations on their Luminescent Performance
Effect of Sulfurization Process on Octahedral Molybdenum Cluster from Mo6 Cluster to MoS2 Nanosheet
Fabrication of YSZ-Carbon Felt Composite Materials by Spark Plasma Sintering Process
Research on Control Factors and Performance of YAG Porous Ceramics
Hydrothermal Fabrication of BiVO4/ Diatomite Composite Photocatalysts and their Photocatalytic Performance
Structural and Optical Studies of Lithium Doped Barium Titanate
Study on Low Temperature Conduction Mechanism of Al Doped ZnO/SiO2/ P-Si Heterojunction
Contact Angle Measurement of Melting SnAgCu Solder Paste Mix with Carbon Allotropes Using In-Line Digital Holography Technique
An Experimental Study on Electrosparking of Tool Electrode Forced Cooling Based on Micro Heat Pipe Bundle
Brazing of Porous Copper Foam with Copper Sheet Using CuNiSnP Amorphous Filler Metal
The Potential Use of Brick Wastes in the Generation of New Materials for Construction through Geopolymerization Processes
Investigation the Ultrasonic Vibration on Tin Soldering Welding of Copper Wires and Plates
Chapter 5: Materials and Technologies of Environmental Engineering, Waste Recycling
Experimental Study on Biological Treatment of Copper in Acid Mine Drainage after Iron Removal
An Effect of pH on Radiation Assisted Modification of Oxygen-Rich Activated Carbon by Urea
Characterization of Coal Fly Ash, Bottom Ash and their Possibilities as Catalysts for Biodiesel Production
Synthesis of Sustainable and High Purity of Quicklime Derived from Calcination of Eggshell Waste in a Laboratory-Scale Rotary Furnace
Chapter 6: Building Materials
Strength Development and Microstructural Investigation of Calcium Carbide Residue and Fly Ash Prepared with Optimized Alternative Green Binders
Development of an Alternative Cementitious Materials Based on Calcium Carbide Residue and Silica Fume
Thermal Insulation Performances of Plaster Composites Based on Embedding Natural Rubber Latex Compound
Effect of Alkali Treatment on the Mechanical Property of Natural Fiber in a Concrete-A Mini Review
Fresh, Durability and Mechanical Behavior of Self Consolidating Concrete Incorporating Fly Ash and Admixture under Hot Weather
Detection of Reclaimed Asphalt Pavement Presence in Asphalt Mixtures Using a Method of Successive Asphalt Binder Extraction
Experimental Evaluation of Moisture Damage and Rutting Resistance for SBS Modified Warm Mix Asphalt Incorporating Recycled Asphalt Concrete
Chapter 7: Optimization of Materials Processing Technologies Parameters
The Method of Constructing a Multidimensional Model for Finding the Values of the Parameters of the Incremental Sheet Forming Process
Optimization of Machining Parameters for Improving Accuracy of Dimension and Shape of Bent Part in Rotary Draw Bending
Dilution Optimization of Laser Cladding Assisted by Pulsed Current Based on Genetic Algorithm and Neural Network
Chapter 8: Tribology, Corrosion and Coatings
Contact-Fatigue Resistance of PM Steel with Hard Coatings
Effect of Sensitization Time on Intergranular Corrosion of 347H Stainless Steel
Microstructural Characteristic and Solid Particle Erosion Behavior of Plasma-Sprayed Ni60/Ni-WC Composite Coating
Corrosion Protection of Nano-Silica Powder Coatingon Artificial Seawater
A Failure Analysis Case of Regeneration Gas Heater Leakage