Materials and Manufacturing

Preface, Organizing Committees
Part 1
I. Structural Materials
Study on the Sewage Treatment by SBBR-BAF Filled with Ceramic Filling
Research on Drag Reduction Effect of Concave Non-Smooth Surface in Air
Numerical Analysis of Hydrodynamic Lubrication on Water-Lubricated Rubber Bearings
The Effect of CF Modification on the Flexural and Tribological Properties of PTFE Composites
Evaluation of the Friction and Wear Properties of PEI Composites Filled with Glass and Carbon Fiber
Research on Process Parameters Optimization of Squeeze Casting for AZ91D Magnesium Alloy
Research on Energy Absorption Characteristics of Honeycomb Sandwich Panels
Corrosion and Protection Studies of N80 Steel in CO2 Solution
Study on Distribution of TiC Particles in Molten Steel under Electromagnetic Stirring Condition
Characterization and Analysis of Ethylene-Propylene Copolymers
Negative Thermal Expansion of Gd2Fe16.5Cr0.5 Compound with Th2Ni17-Type Structure
Local Stress-Strain Method for the Effects of Scratch on Fatigue Performances of Cabin Glass
Research on Substitution of Molybdenum by Manganese in Low Alloyed Bainite Ductile Iron
Effect of Minor Compressive Deformation in Austenite on Martensitic Transformation in Modified 9-12%Cr Ferritic Steel
The Investigation on the Non-Contact Treatment of the Metal Surface Layer by Using Strong Pulse Electromagnetic Field
The Phase-Field Simulation of the Grain Growth under External Field
Advanced Stab Resistance Fabrics Utilizing Shear Thickening Fluids
Influence of High Current Pulsed Electron Beam Irradiation on Ni-P Electroless Plating
Properties of Nanocrystalline Aluminium Fabricated by Warm-Vacuum-Compaction Method
Evaluation of the Friction and Wear Properties of PA6 Composites Filled with Nano-SiO2
Dynamic Strain Aging Induced by Cyclic Deformation in Two Magnesium Alloys
Superplasticity of AZ91 Alloy ECAPed with Different Routes
Study of Epoxy Resin Emulsion by Emulsion Graft Polymerization
The TPB and Tribological Properties of Short Carbon Fiber Reinforced Polyimide Composite
Preparation of High Surface Area Anatase TiO2 by a Low Temperature Hydrothermal Process
Numerical Simulation on the Surface Subsidence Effect during Shield Tunneling Construction
Calculation of Statistical Values (S') of Phase Structure Formation Factor (S) and Application to Solidification Theory of Cast Iron
Synthesis and Properties of Cerium Oxide Nanoparticles
The Study on Precipitation Characteristics in 6082 Aluminum Alloy with Cu Addition
Effect of Asynchronous Rolling on Deforming Texture in Al Alloy 6111
Effects of Heating Methods on Recrystallization Texture of an Al-Mg-Si Alloy
Experimental Research on the Fracture Properties of Roller Compacted Steel Fiber Recycled Concrete
Microstructure and Mechanical Properties of Al-Mg-Sc Alloy Processed by Semi-Solid Continuous Casting-Extrusion
Research on the Nanophase Reinforce Cu Alloy
Calculation of Statistical Values of Phase Interface Valence Electron Structure Parameters of Cu-Zn Alloy
Analysis of the Effect of Nitrogen on Cold Shortness Behavior of Steel with the Electron Structure Parameters of Phase Interface
Effects of the Valence Electron Structures of Nitride on Cold Shortness in Steel
Influence of Different High Temperature and Heated Time on Properties of Concrete
Effect of Process on Microstructure and Elevated Temperature Mechanical Behavior of Multi-Phase NiAl-Fe(Nb) Alloy
Microstructure and High Temperature Mechanical Property of Directionally Solidified NiAl-Cr(Mo)-W/Nb Alloy
Study on Photocatalytic Performance of F-Doped Nanometer TiO2
Effect of Temperature and Grain Size on the Corrosion Behavior of 316L Stainless Steel in Seawater
Electrochemical Corrosion Behavior of Laser Gas Nitrided Layer on the NiTi Shape Memory Alloy in Hank's Solution
Microstructure and Hot Corrosion Properties of Laser Cladding of a Co-Base Alloy on the Leaf Surface of Gas Turbine
Study on Wear and Corrosion Properties of Ti6Al4V Alloy by Laser Gas Nitriding
Study of WC Particles Dissolved by Plasma Surfacing
Study on Microstructure and Mechanical Properties of Hot Rolled Steel Plate Strengthened Complexly by Titanium and Molybdenum
Post-Process of Density Streaks Image of Flow Field in Supersonic Jet Device Captured by Laser Dual Hologram Interferometry
Effect of Mineral Mixture of Steel Slag and Blast Furnace Slag on the Properties of Cement
Anticorrosion Conversion Coating Content Lanthanum and Phosphate on Foam Mg Alloy
Microstructure Development of Twin Roll Cast AZ31 Sheet in the Pre-Deformation Deep Drawing Process
Al-0.90%Fe Alloy Sectional Solidified in a Gradient Magnetic Field
Experimental Confirmation of Ni5Al3 Phase in Ni-Al Binary System by Diffusion Couple Technique
Simulation of Grain Growing Process of Zinc-Aluminium Alloy under High Pressure
Influences of Acting Parameters of Electric Pulse Modification on the Al-22%Si-1.5%Cu Alloy
Microstructure and Micromechanical Property of C/C-SiC Composites
Development of 360 MPa Grade Heavy Plate with High Performance
Application on Statistical Value of Phase Structure Formation Factor to Fe-C Phase Diagram
Experiment Study Based on Nano-Ceramic Grinding Wheel Bond
The Vehicle Dynamic Load Indentification under the Excitation of Random Road Surface
Effects of Elastic Modulus Degradation on Simulation of Stretch-Bend Springback of Dual Phase Steel
Influence of Sn Content on the Microstructure and Dry Sliding Wear Behaviour of Hypereutectic Al-20Si Alloy

In Situ Observation of Solidification Behavior in a Q235 Steel by Using Electric Pulse Modification
Study on Inclusions in Ductile Cast Iron
Measurement System of Contact Angle between Molten Steel Droplet and Refractory Material
Crystal Growth during the Solidification Process of Continuous Casting Slab
Control of Liquid-Drop Surface Shape in Melt
Crack Tip Opening Displacement of X100 SAWL Pipe
Effects of Pulse Electric Field on the Clusters of Pb-Sn Molten Alloy
A New Wind Vibration Control Strategy Based on Active Variable Stiffness
Factors Analysis of Non-Aqueous Electrolytic Extraction of Ultrafine Non-Metallic Inclusions
Metallurgical Behavior of Adjusted Converter Slag in Reduction Process
Web Reinforced AZ91 Composites with Enhanced Strength and Plasticity
Effect of Boron on Microstructure and Mechanical Property of High Grade Pipeline Steel
Microstructure and Deformation Characteristics of X80 High Deformability Pipeline Steel
Theoretical Analysis of the Influence of the Electron Pulse Modification on Al-Cu-Mn Alloy Initial Aging Stage with Valence Electron Structure
Corrosion Protection and Composition of Galvanized Steel Substrates by Bis-[3-(triethoxysilyl)-Propyl]Tetrasulfide and Gamma-Aminopropyltriethoxysilane
The Effect of Temperature and Pulling Rate on Young's Modulus of Steel FAS390Q

In Situ Observation of Growth Process of ? Phase of 0.15% C Carbon Steel during Solidification
Effect of Pulse Electric Field on the Columnar Crystals Growth of Al-5.6 Wt.%Cu during Unidirectional Solidification
Research of Shrinkage Process for Fe-0.18%C Cast Ingot during Solidification
The Effect of Mixture Parameter on the Properties of SCC
Microstructure Evolution of Cold Rolled Hot Dip Galvanized Dual-Phase Steel during Continuous Heating Process
Experimental Investigation of Formability Enhancement Using Hydraulic Counter Pressure Assisted Warm Deep Drawing
Deformation Behaviour of AZ31 Magnesium Alloy Sheets Produced by Twin-Roll Casting and Sequential Hot Rolling
Effects of Al Addition on the Microstructure of Fe-Mn-Si Ultra-Fine Grain Steel Welded Heat Affected Zone
Micronano Structure and Mechanics Behavior of Mosquito's Proboscis Biomaterials with Applications to Microneedle Design
Semi-Solid Billets of AZ91D Magnesium Alloy Prepared by Forward Extrusion/Equal-Channel Angular Pressing

In Situ Observation on Fracture Behavior of 800MPa Grade Dual-Phase Steel
Effects of Different Melt Modification Techniques on the Structure and Properties of Silicon Brass
Molecular Dynamics Simulation Study of the Structural Evolution in the Cu-Ni Coalescence Induced by Ni Heterocluster
Effects of Electric Pulse Modification on the Hot Tearing of Al-5%Cu-0.8%Mn Alloy
Effect of Partitioning Temperature on Work Hardening Behavior of Q&P Steels
Influences of Melt Temperature on Casting Structure of Al-Cu-Mn Alloy Treated by Electric Pulse Modification
Non-Symmetrical Load Influence on Aluminum Alloy-Welded Joint Fatigue Limit
Bulk and (001) Surface Properties of TiAl3 Compound
Research on Stress-Strain Relationship Model of Concrete Prism Confined by GFRP
Corrosion Behavior of Zr53.5Cu26.5Ni5Al12Ag3 Bulk Amorphous Alloy in 3.5% NaCl Solution
Effect of Temperature on Geometric Accuracy of AZ31 Profile during Warm Pre-Tension Rotation Bending
II. Functional Materials
Characterization of Ag Doped P-Type ZnO Thin Films Prepared by Electrostatic-Enhanced Ultrasonic Spray Pyrolysis
Methods of Improving Shape Memory Effect of FeMnSiCr Alloy Pipe Joint
Heteroepitaxy of ZnO Films on Epi-GaN/Al2O3(0001) by MOCVD
Magnesium Incorporation in Sol-Gel Derived Apatite Coating on Ti6Al4V Substrate
Synthesis and NLO Properties of Calix[4]Arene Derivatives
The Blue Luminescence of CeCl3 Doped Aluminum Oxide Thin Film
Study on the Effects of the Self-Healing Microcapsules on the Tensile Properties of Polymer Composite
Oxidation Behavior of a New Ni-Base Superalloy in Air at 850 degreesC and 950 degreesC
Injection Molding Preparation and Film Formation Performance of Powders-Modified Polyethylene Biomass Carrier for Aerobic Process
Sensitivity to NO2 of ZnO Film Prepared by Electrostatic-Enhanced Ultrasonic Spray Pyrolysis
Study on Effect of Sintering Temperature on Microstructure and Compressive Property of Porous NiTi Alloys
Microwave Absorbing Properties of FeXCo1-X(x=0.7, 0.8) Alloys with Spherical Nanoparticles
Study on Preparation of SiO2 Optical Fiber Preform by SG Method
Fabrication and Sinter-Ability of Ce3+-Doped YAG Ceramics by Low-Temperature Combustion Method
First-Principles Study on Ga-N Co-Doped P-Type ZnO
Effect of BaO on Thermo-Physical Properties of Lithium Zinc Silicate Glass-Ceramics

In Vitro Behavior of Magnesium Apatite Coatings in Organic Modified Simulated Body Fluid
The PTCR Performance of Nb-Doped BaTiO3-NBT Ceramics
Synthesis and Lithium Storage Performance of Sn-Co/C Composite Anode Materials for Li-Ion Battery
The Magnetocaloric Properties of (Mn1-XFeX)5Sn3 Compounds Prepared in Magnetic Environment
The Magentocaloric Effect of Gd5Si2Ge2-XZnX Alloy
Structural, Electrical and Optical Properties of Li-Doped ZnO Thin Films Influenced by Annealing Oxygen Pressure
Study on Surface Oxidation Behavior of Pourous NiTi Alloy at High Temperature
Broadband ~1.5?m Emission of Er3+ in Heavy Metal Germanium Tellurite Glasses for Optical Fiber Amplifier
Synthesis of Nano Amorphous In2O3 by Microwave Method and its Photocatalysis
Up-Conversion Luminescence Properties of Gd2O2S:(Yb3+,Er3+) Nano-Particles Synthesized by a Co-Precipitation Method
Synthesis and Growth Mechanism of NbSe2 Nanostructures
Morphology Control of Cobalt Oxalate Particles under the Action of Pulsed Electromagnetic Field
Study on Preparation and Optical Absorption of Ge Doped TiO2 Composite Thin Films by Sol-Gel Method
Influence of Electrical Pulse on Shape Memory Effects and Phase Transition of FeMnSiCrNi Shape Memory Alloy
Study on the Influence of Different Pulse Temperatures on Al-22%Si Alloy Solidification Structure
Effects of Electric Pulse Treatment during Solidification on the Solidification Structure of Al-5%Cu Alloy
Analysis of Structural Condition and Thermodynamics Condition of Graphite Heterogeneity Nucleation in Cast Iron
Preparation of Pd-TS-1 Composite Membrane for Hydrogen Separation
Study on the Activation Energy of Nanocrystallization of Amorphous Fe78Si9B13 Alloy Treated by Low Frequency Pulse Magnetic Field
Fabrication and Characterization of Yttrium Lanthanum Oxide Transparent Ceramics Using Powders Prepared by Different Methods
Theoretical Calculation of ? Transition Temperature of Ti-6Al-4V from Valence Electron Level
The Promotional Effect of Lanthanum Additive on the Apparent Electrocatalysis of Ti/(Ru,Ir)OX Electrode
Hemocompatibility of TiO2 Nanoparticles Composite PTFE Coating for Medical Devices
Effect of Synthesis Conditions on Photocatalytic Activities of Nanoparticulate TiO2
Influence of Processing Parameters on Atmospheric Pressure Plasma Etching of Polyvinyl Alcohol Films
Photoluminescence of (Gd1-x,Dyx)2O2SO4 Phosphors Synthesized by Homogeneous Precipitation Method
Study of Modified Properties on Electrolytic Phosphate Coatings with Nano-Al2O3
Preparation of Special Microstructures by Polystyrene-Block-Poly(methyl methacrylate) Surface Micelles
Fabrication and Luminescent Properties of Eu3+-Doped Yttrium Lanthanum Oxide Transparent Ceramics
The Effect of Sc2O3 on Yb3+-Doped Y2O3 Transparent Ceramics
Spectral Properties of Pr3+:La2O3 Ceramics
The Preparation and Characterization of LaAlO3 Translucent Ceramics
Fabrication and Spectroscopic Properties of (Ho0.01La0.10Y0.89)2O3 Transparent Ceramics
Effect of Y Addition on Mechanical Properties of Ni50Mn28Ga22 Magnetic Shape Memory Alloy
Study on Polyethylene Glycol Acrylate Crosslinked Gels as Phase Change Materials
Study on the Preparation and Properties of PEG Phase Change Materials Fixed by Semi-IPN
High Responsive ZnO Nanowire UV Sensor
A Preliminary Study of Anodization and Electroless Ni-P Plating on AZ80 Magnesium Alloy
Automatic Setting Control of the Raw Slurry Blending Process Based on the Case-Based Reasoning
Study on Preparation of Gradient Porous NiTi Alloys by Powder Metallurgy Method
Effect of Post-Annealing Ambient on Electrical Structural Properties and Optical Properties of ZnO:Al Transparent Films
Surface Treatment of TC4 by Micro-Beam Plasma Arc
Part 2
III. Composite Materials
Investigation on the Wettability between Nb-Al Alloy and Porous Al2O3 Ceramics Prepared by Freeze Casting
Effect of SnO2 Coating on the Low Temperature Extrusion of 6061Al Matrix Composite Reinforced with Aluminum Borate Whisker
Simulating Study on Microwave Assisted Switching of Ferromagnetic Moment for Grains
Influence of Die Angle on the Extrusion Behavior of 6061Al Matrix Composite Reinforced with SnO2-Coated Aluminum Borate Whisker
Effect of Voltage and Current Density on the Coating Performance of Micro Arc Oxidation on Pure Titanium Metal
Preparation of Flexible Polymer-Cement Mortar
Research of SiCP/2A50 Composite Materials Creeper Treads Prepared by Liquid Forging
Preliminary Approach to Mechanical Characteristics of Cement Mixed Superfine Iron Tailings
Preparation and Characterization of Core-Shell ?-Fe2O3/Au Composite
Wearability of SiCP Particle Reinforced Aluminum Matrix Composites Creeper Tread
Complex Modification on Microstructure and Properties in Mg2Si Reinforced Hypereutectic Al-Si Composite
Synthesis and Microwave-Absorbing Properties of Al2O3 Coated Polyhedral Fe Nanocapsules Prepared by Arc-Discharge Method
Experimental Study on Strength of Connections to Concrete Filled Tubular in Fire
Comparative Study of Two Types of Alkali Lignin from Different Origin
Study on Mechanical Properties of EPDM/HPVC Prepared by Dynamic Vulcanization
Dynamic Mechanical Thermal Analysis of Pultruded Carbon Fiber/Resin Composite Cable Cores
Effect of DLC Film on Tribological Properties of Carbon/Carbon Composites
Preparation of Magnetically Modified Zeolites and the Application of Metal Ions Adsorption
Research on Mixture Design and Mechanical Performance of Porous Asphalt Concrete in Cold Regions
Roll Casting of a Wire Inserted Strip
Orientational Analysis on Static Recrystallization at Tension Twins in AZ31 Magnesium Alloy
Effect of Solution Concentration on Growth and Photoluminescence of ZnO Nanorod Arrays
The Influencing of Fibers on the Concrete Used to Nuclear Waste Container
Study on the Friction Properties of Porous Al2O3 Ceramic/ Al2O3 Ultrafine Particle/ Epoxy New Composites
Mechanical Properties and Wear Behavior of Polypropylene/Carbon Nanotube Nanocomposites
Thermal and Electrical Properties of Polypropylene/Carbon Nanotube Composites
Study on Making Ceramic Composite Steel Plate by SHS Process
Scanning and Modeling of Large Thin-Walled Curved Surface Part
Manufacturing Process of Large Scale Sandwich Structure with Variable Thickness of PMI Foam Core
Manufacturing Brake Pads by Using Hot Powder Preform Forging for Low Duty Applications
Effect of Milling Time on the Properties of Nanocrystalline CuCr50 Alloys
IV. Advanced Manufacturing Process and Technology
Research on Intelligent Soft Starting Method for Three-Phase Asynchronous Motor Based on MATLAB
Modeling and Simulation on Four-Way Valve Control Motor System of Cable Car Reel
Design of Monitoring Device for Goods Train Based on Zigbee Technology
Research and Application of an Enhanced Data Mining Algorithm in Virtual Manufacturing Technology
H? Controller for Networked Nonlinear Manufacturing Process Interconnected Systems Based on T-S Fuzzy Model
Study on the Reliability Allocation Algorithm Based on Partial Squares Sum
Research on Iterative Learning Servo Controller of Permanent Magnet Linear Synchronous Motor
Study on a Novel Single-Stage QR PFC Converter
Engineering Application Research on PLC in the Oily Water Treatment Mechanical Device
Study on Voltage Stability of Electricity Network Structure Based on the Eigenvalue Method
Influences of Technology Parameters of Heavy Shell Ring Rolling Mill with Double Drive Rolls Based on FEM
CAE Optimization Design of Mine Hoist Spindle Device
Progress on Measurement of Adhesion Strength of Marine Microfouling Organisms
Design Method for a Pair of Oval Bevel Gears
Middle-Convex Curve and Ellipse Surface of Piston Skirt Design Based on MATLAB and Pro/E
Simulation and Redesign of Industrial High-Speed Sewing Machine Based on Performance-Driven
Research on Manufacture Processes of Resin Dry Transformers Based on Object-Oriented Petri Net
Study on Geometrical Parameters Definition for Section Curve of Fully Intermeshing Twin Screw
Weld Width Control System for Pulsed MIG Welding of Aluminum Alloy
Study on Stress Intensity Factors for Circumferential Cracked Elliptical Pipes under Tension
Fatigue Analysis of the Aircraft's Hydraulic Pipes Based on Fluid-Structure Interaction
Finite Element Analysis of 35 Tons Steel Coil Overturning Machine
The Virtual Design of Cluster Straw Fuel Briquetting Machine
Preliminary Research on Length Conversion Factor of Assemble Boom
Research for Tool Face Mathematical Model of Multi-Facet Drills Used in Processing High Manganese Steel
Analysis and Simulation of Velocity and Acceleration Based on Three-Translational Parallel Mechanism
Research on Surface Morphology of Three-Dimensional in CNC Cylindrical Grinding
Study on Fatigue Life Prediction of Mechanical Components with Stochastic Cyclic Load Application
The Numerical Simulation and Optimization of Squeeze Casting Process for Producing Magnesium Wheels
Experiment Research on Impact of Total Rolling Reduction Ratio on the Properties of Vacuum Rolling-Bonding Ultra-Thick Steel Plate
Influence of Welding Residual Stress on Stress Intensity Factor of Two-Dimensional Cracks
Numerical Simulation of Performance of Steam Ejector Influenced by the Distance between Nozzle Outlet and Mixing Chamber Inlet
An Approach for Application of Drive at Center of Gravity in a Vertical Machining Center
Vibration Simulation of Disc Vibration Dryer Based on ADAMS
Study on Forming Feasibility of AISI-5140 Triple Valve by Multi-Way Loading: From Aspect of Geometric Parameters
Curvature Characters of Revolving Curved Surface and Applications in Math Model of Milling Cutter
Research on Mold's Reverse Modeling and Basic Surface Repair
Optical Path Design and Gain Anticipation in Tm3+ Doped Glass Channel Waveguide for U-Band Amplification
Finite Element Analysis of Spindle for Turning Center Based on ANSYS
The Deformation Rule of the Cooled U75V Heavy Rail Caused by the Different Heat Transfer Coefficient
3D Numerical Simulation of Point Impact Breakage of a Glass Ball
Surface Quality of Pulsed Laser Cutting of Difficult to Machine Steel
Carbon Nanotube Templated Growth of Nano-Crystallinity ZSM-5
Mechanical Design of Bionic Snake Mouth and its Analysis
The Optimum Design of A2JK Hoist Drum Based on ANSYS
Research on Cutting Force of Milling Aviation Aluminum Alloy
Investigation of Water Cavitation Peening-Induced Microstructures and Residual Stress in the Near-Surface Spring Steel SAE 1070
Study on Web-Based Collaborative Design of Air-Hydraulic Intensifier
Research on Breaking Chip and Drilling Force for High Temperature Alloy Based on Self-Vibratory Drilling Head
Research on Bending Process of Integral Panel Skins
Machining of Metal Matrix Composites with Minimum Quantity Cutting Fluid and Flood Cooling
Discussion on Binding Additives and Binding Process in Selective Laser Sintering
Surface Quality Analysis in Mill-Grinding of SiCp/Al
Structure Analysis of Hybrid Self-Reconfigurable Modular Robot
Nano-Particle Manipulated with Near-Field Optical Tweezers
Simulation Analysis of an Eddy Current Sensor Array Based on Finite Element Method
The Effects of Hollow Ratio on the Radial Bearing Properties of Pre-Loaded Cylindrical Roller Bearings
The Modal Analysis for Spiral Bevel Gear Based on Patran/Nastran
Application of Yolico YD5200 Frequency Converter in Mine Hoist
3D Model Registration Based on Feature Extraction
Study of Friction Stir Welding Technics and Weld Performance of Dissimilar 6063-3A21 Aluminum Alloys
Research of a Piezoelectric Driving Linear Movement Device
Effect of Bending Direction on Springback of High Strength Steel Sheet
Effect of Tempering Holding Time on Performance of Wear-Resistant Steel of High Pressure Blower Impeller
Underground Tunnel Development Survey of Shield Tunnelling Machine
The Optimization Design of Cheese Bionic Kneader with Response Surface Method(RSM)
Distributed and Cooperative Organization of Information Platform for Manufacturing Clusters
The Study on CAD Technology of Reconfigurable and Module for Vertical Bag Packaging Machine
Preparation of Bio Tissue Micro Array Based on NC Positioning and Image Processing Technology
Research on a New Type of Ultrasonic Polishing Vibrator
Residual Stress Measurement for Coated Film on Cold Work Tool Steel
Influence Analysis of Machining Errors on Bearing Capability of Internal Gear Pair
Effect of Shoulder Diameter on the Resulting Interfacial Regions of Friction Stir Welds between Aluminium and Copper
Effect of Scan Velocity on Resulting Curvatures during Laser Beam Bending of AISI 1008 Steel Plates
Design of Hydrostatic Pressure Tests Automatic Control System on Oil Pipeline (bolster) by PLC and IPC
FEA of Solid Stream Coupling Field Formed by Automobile Engine Cylinder Head and Cylinder Head Gasket
A Regression Model for Force and Surface Roughness Estimation during Hard Turning
Study on Identification Method of Geometric Parameter Errors of 6-DOF Parallel Machine Tool
Research on Seamless INS/GPS Integrated Navigation Algorithm
Monitoring System Design of Fuse Automatic Assembly Machine Based on WinCC
Vehicle Engineering Application Study on TSF Var Compensation Method for Electric Locomotive of Electrified Railway
Study on the Speed Control of Diesel Engine Based on Neural Sliding Mode Control
V. Vehicle Engineering Technology
Design of Measurement and Control System for the Rail Fastening Spring Clip Type A and B
Experimental Determination of Aircraft Structural Material Life Envelope
Study on Expression of SIF for Tapered Lug Subjected to Oblique Pin-Load
Study on Locally Resonant Phononic Crystals Based on Automotive Noise Control
Simulation Analysis and Research of Tire Wear
Research and Application of Genetic Algorithm in Material Handling Route for Assembly Line of Airbag
A New Analytical Method for Influences of Shock Absorber Rubber Mount on Automotive Ride Comfort
Crashworthiness Design of Vehicle Body Based on Factorial Screening
Modeling and Simulation with Finite Element Method in Car Seats
Optimization Design of Double Wishbone Front Independent Suspension Based on ADAMS
Aerosol Behavior in the near Wake Region of the Vehicle
Random Vibration Analysis of Heavy-Duty Truck Based on Pseudo Excitation
Surface Reconstruction of Auto Outer Door Panel Based on Reverse Engineering
AHP Approach for Supplier Selection in a Polyamide Fiber Plant in Supply Chain Management
Simulation for Vehicle Handling Performance Based on the Cybernetic Model of "Driver-Vehicle-Road" Closed-Loop System
The Motive Reliability Design of Mechanical Structure
Stability Optimal Control Based on 15-Dof Vehicle Model
Research on Congestion Mitigation Strategy Downstream Off-Ramp for Urban Expressway Based on Fuzzy Logic Method
Study on Bike Rental Pricing Model under the Low-Carbon Mode
Study on the Relationship of Airbag Effect and Occupant Position
Using the Law of "Three Points and Two Sections" to Reduce the Risk of Vehicle Collisions
Natural Frequency Study of Automotive Engine Valve Spring by Experimental Method
Coordination between Road Network and Economic Development Based on WPDEA
Design and Controlling Study on Electro-Hydraulic Mix-Drive Cooling System in Vehicle
Research and Implementation of Batteries Charging Management System for Electric Vehicle
Jackknife Control on Tractor Semi-Trailer during Emergency Braking
Engine Fault Diagnosis Based on PSO-BP Network
Research on Outlier Mining Algorithm Oriented to Traffic Information
Study on Assessment Method and Statistical Distribution of Cylinder Error
Component of Cu/n-SiO2 Composite Particles by Mechanical Milling
Research on Synchronous Testing Technique of the Shock Absorber Performance in Automotive Coaxial Suspension
Elemental Identification of Materials Using Optical Emission Spectra during Electric Discharge Machining
Single Discharge of Dry ?-EDM on Silicon: Crater and Plasma Temperature Measurement