Innovative Technologies in Development of Construction Industry
Published on 11. March 2015
Book
Paperback/Softback
1722 pages
978-3-03835-403-1 (ISBN)
Description
Collection of selected, peer reviewed papers from the Scientific Conference Week of Science in SPbSPU - Civil Engineering (SPbWOSCE 2014), December 3-4, 2014, Saint-Petersburg, Russia. The 233 papers are grouped as follows:
Chapter 1: Buildings and Structures;
Chapter 2: Foundations, Underground Structures;
Chapter 3: Hydraulic Engineering Works;
Chapter 4: Building Materials and Products;
Chapter 5: Applied Mechanics in Material Science, Static and Dynamic Loads of Structures and Facilities;
Chapter 6: Organization and Planning of Construction Works;
Chapter 7: Architecture and Urban Planning;
Chapter 8: Air, Gas and Water Research in Area of Civil Engineering;
Chapter 9: Energy Efficiency, Green Buildings and Sustainable Development;
Chapter 10: Education and Training in Area of Civil Engineering
Chapter 1: Buildings and Structures;
Chapter 2: Foundations, Underground Structures;
Chapter 3: Hydraulic Engineering Works;
Chapter 4: Building Materials and Products;
Chapter 5: Applied Mechanics in Material Science, Static and Dynamic Loads of Structures and Facilities;
Chapter 6: Organization and Planning of Construction Works;
Chapter 7: Architecture and Urban Planning;
Chapter 8: Air, Gas and Water Research in Area of Civil Engineering;
Chapter 9: Energy Efficiency, Green Buildings and Sustainable Development;
Chapter 10: Education and Training in Area of Civil Engineering
More details
Series
Language
English
Place of publication
Zurich
Switzerland
Target group
College/higher education
Professional and scholarly
Illustrations
Illustrations
Dimensions
Height: 240 mm
Width: 170 mm
Thickness: 86 mm
Weight
3200 gr
ISBN-13
978-3-03835-403-1 (9783038354031)
DOI
10.4028/b-0joFaV
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Software
03/2015
Trans Tech Publications Ltd
€594.79
Shipment within 10-20 days
E-Book
01/2015
Trans Tech Publications Ltd
€211.86
Available for download
Content
Preface and Scientific Committee
Chapter 1: Buildings and Structures
The Brickwork Joints Effect on the Thermotechnical Uniformity of the Exterior Walls from Gas-Concrete Blocks
Calculation Method of Justification of Technical Actions for Prevention of Ice Dams Formation on Buildings with a Pitched Roof
Fire Resistance of Non-Crack Resistant Flexural Reinforced Concrete Elements
Heat and Mass Transfer in Low-Temperature Insulation in Moisture Conditions
Comparison of Different Types of Transparent Structures for High-Rise Buildings with a Fully Glazed Facade
Prodrome in Experimental Investigation the Thermal Shielding Systems in Enclosure Structures
Improvement of the Double Skin Facades
Reduced Thermal Resistance of a Two-Layer Wall Construction
Unsteady Temperature Condition of the Enclosure Structure
Unsteady Airway as an Effective Method of the Ice Melting Prevention on the Building's Roof
Humidity Conditions of Enclosing Structure with Silicate Brick Veneer and Variable Air Gap
Characteristic and Application of Facade System 'Polialpan'
The Glass Ventilated Facades - Research of an Air Gap
The Results of Experimental Determination of Air Output and Velocity of Flow in Double Skin Facades
Improving Technology of Constructing Pre-Fabricated Buildings in the Conditions of Northern Regions
Construction of Temporary Accommodation Camp and Selection of Optimal Type of Building
Analysis of the Masonry Structure Calculation with Vertical Ring Beams According to European Standards
Program- and Goal-Oriented Approach to Organization of Monitoring Deformations of Buildings and Structures
Constitutive Relationships of Concrete and Reinforcing Steel under High Temperatures
Objective Estimation of the Use of Windproof and Weatherproof Membranes in Double Skin Facades
Fire Safeguards of "Plastbau" Construction
The Research of the Effect of Basalt Wool on the Acoustic Isolation of the Floating Floor
Performance Evaluation of High-Rise Complex Construction Depending on Building Site Placement
Using ANN in Process of Seismic Damage Prediction for Residential Buildings
Experimental Testing of Retaining Walls of Precast Elements
Chapter 2: Foundations, Underground Structures
Specific Features of Calculating Underground Structures Erected with Use of Freezing Method
Calculation of Retaining Walls with Anchoring at Different Levels
The Comparison of Pile Load Capacity Based on the Results of Analytical Calculations and Static Tests
Accuracy Appraisal of Pile Simulation by Elastic Linkage
Some Aspects of Maintaining Inclined Tunnel Escalators in St. Petersburg
Effectiveness of Soil Reinforcement Based on Complex Ash-Cement Bonder
Stress-Deformation State in the Rock Massif (Illustrated with the Example of Macedonia)
Improving Technological Processes for Borehole Drilling in Construction Using Vibration Impact
Chapter 3: Hydraulic Engineering Works
Loads from Ice Ridge Keels - Analytical vs. Numerical
Coastal Ice Investigation on the Site of Further Bridge Construction - Sveagruva, Svalbard, Norway
Using of Ice for Constructing Islands in the Arctic Conditions
Problems Concerning Gravel Islands Constructing and Exploitation in the Arctic Conditions
Comprehensive Settlement of the Gravitational Drilling Platform on the Seismic Action
Engineering Properties of Sea Ice Ridges in the Barents Sea in 2012-2014 Years for Evaluation of Ice Loads on Offshore Structures
Ice Regime for Basins and Pumped-Storage Facilities
Hydropower Potential Estimations and Small Hydropower Plants Siting: Analysis of World Experience
Multicriterion Optimization of Power Sites Location on the Watercourse
Impact Wave on Port Mole in during Construction
Experimental Study of Tsunami-Type Waves Impact on Soil near Foundation of Offshore Gravitational-Type Platforms
The Influence of Tectonic Faults on a Stress-Strain State of a Large Concrete Dam
Geotechnical Researches for Proving the Design Decisions for Reconstruction of the Dam on the Creek Pevek
Characteristics of Bulk Carriers with Respect to the Developing Export Coal Terminals on the Far East of Russia
Ensuring the Reliability of Earth Dams in Complex Hydrogeological Conditions
Empirical-Statical-Dynamical (ESD) Methodology for Extrapolation of Rock Mass Properties for Construction of Tunnels
Enhanced Mualem-Van Genuchten Approach for Estimating Relative Soil Hydraulic Conductivity
Two-Component Incompressible Fluid Model for Simulating the Cohesive Soil Erosion
Chapter 4: Building Materials and Products
Local Data Flow Principles in Porosity of Materials
Influence of Chemical Additives on Radiation Stability of Concrete - Theoretical Basis and Evaluation Method
Heat Insulation Materials Based on Cenospheres
Improving the Durability of Protective Materials Based on Inorganic Binders when Exposed to Short-Wave Radiation
Application of Styrofoam in the Elements of Building Constructions
Destruction of Monuments' Materials by Organic Acids - Micromycetes Metabolites
Testing of the Mechanical Properties of Masonry Walls - Determination of Compressive Strength
Effect of Air-Entraining Agent LHD on the Technological Properties of Concrete Mix Containing Superplasticizer S-3
An Impact of Carbon Nanostructured Additives on the Kinetics of Cement Hydration
Thermal Cracking Resistance in Massive Concrete Structures in the Winter Building Period
Comparison of European and Russian Technical Documentation for Structural Use of Concrete
The Influence of Based on Polyalcohols Additive on the Cement Paste Shrinkage
Property Changes of Thermal Insulation Material due to the Effects of Environmental Conditions
Influence of Plasticizing and Siliceous Additives on the Strength Characteristics of Concrete
The Influence of Precompression on Strength and Strain Properties of Concrete under the Effect of Elevated Temperatures
Fiberglass Reinforcement for Concrete
Fireproofing Cemented Fiber Vermiculite-Concrete Composites with Application Volcanic Ash
Effect of Modifying Admixtures on the Cement System Hydration Kinetics
Short-Time Creep of Concrete
Kinetics of Hydration and Hardening Processes in Clinkerless Slag-Alkaline Binder Materials
Dependence of Relative Decreasing in Strength by Rate of Strain for the New Rapid Method for Determination of Concrete Frost Resistance
Development of the Nanomodified Filler for Asphalt Concrete Mixes
Optimization of Provide Compositions Bitumen Emulsions, for Example the Cationic Emulsifier
Salt Corrosion of Masonry Mortar
Influence of Cladding Material on the Vapor Permeability of Lightweight Expanded Clay Aggregate (LECA) Concrete
Use of Epoxy Fluoroplastic Coatings in Friction Pendulum Bearings
Influence of Synthetic Fibers Dispersed Reinforced Concrete
Analysis of Behavior of a Lattice Girder According to Theory of Plasticity with Link Elements
Determination of the Critical Duration of the First Heating of Heavy Concrete by the Criterion of the Maximum Strength Reduction
Influence of High-Porous Filling Materials and Mineral Fiber on Thermal and Fire Resistant Properties of Aerated Composites
Special Aspects of Hydration Process of Microfine Cement
Novice Methodology in Preserving Prestressed Cables by Injection of a Special Gel
Theory and Practice of Functioning Machines for Vibratory Agitation
Construction of Road Embankment with Waste Materials
Chapter 5: Applied Mechanics in Material Science, Static and Dynamic Loads of Structures and Facilities
Application of Continuum Damage Mechanics Approach for the Strength Analysis of Reinforced Concrete Constructions
Application of Stepped Isothermal Method for Prediction the Creep Behavior of Extruded Polypropylene Geogrid
Design of Lightweight Glass-Fibre-Reinforced Epoxy I-Beam for Structural Applications
Modeling of Concrete Behavior under Compression
Geometrically Nonlinear Rods Theory - Comparison of the Results Obtained by Cosserat-Timoshenko and Kirchhoff's Rod Theories
The Effect of Weathering and Biological Exposure on the Tensile Properties of Nonwoven Geotextile
Development and Investigation of Mechanical Properties of Glass Fiber Reinforced Concrete
Finite Element Modeling of Steel Pipeline Reconstruction Using Fiberglass Composite Material
Two-Dimensional Surface Fatigue Crack Propagation and its Finite Element Simulation
Simulation and Experimental Investigation of Deformation and Fracture of the Masonry
Bending of Laminated Composite Plates
A Posteriori Error Control at Numerical Solution of Plate Bending Problem
Modeling Nonlinear Deformation and Destruction Masonry under Biaxial Stresses Part 1 - Masonry as Simulation Object
Local Buckling of Cold-Formed Steel Members with Edge Stiffened Holes
Strength Evaluation of a Linear Extended Structure on a Statically Inhomogeneous Foundation
Advanced Method for Semi-Rigid Joints Design
Prestressed Cladding Elements for Tensioned Structures
Reticular-Stretched Thermo-Profile: Buckling of the Perforated Web as a Single Plate
Optimization Models of Heat Treatment Process of Masonry in the Winter due to a Stationary Heating System Constructed Buildings Oil Production Complex
Calculation of Combined Structure and Installation Roof Systems Taking into Account Structural Nonlinearity Factor
Crack Resistance Criteria for Reinforced Concrete Beams with Corrosion Damage in Strength Resource Assessment
Mathematical Analogy between Non-Uniform Torsion and Transverse Bending of Thin-Walled Open Section Beams
Comparison of the Bearing Capacity of LST- Profile Depending on the Thickness of its Elements
Strength and Stability of Arched Frame Structures Made of Brittle Material
Friction of Rubber on the Concrete Surface Treated with a Remedy against Drying out
The Typical Roof Structure Project Based on Trusses Made of Roll-Welded RHS Pipes Development
The Computational Model of Spatial Formation of Cracks in Reinforced Concrete Constructions in Torsion with Bending
Probable Errors of Dynamic Method at Conservative System Stability Analysis
Justification of Using Delta-Functions in the Theory of Shells Featuring Irregularities
Calculation on Formation of Longitudinal Cracks in Reinforced Concrete Structures Taking into Account Nonlinearity of Concrete Straining
Modeling Nonlinear Deformation and Destruction Masonry under Biaxial Stresses Part 2 - Strength Criteria and Numerical Experiment
Quadrilateral Finite Element for Analysis of Reinforced Concrete Floor Slabs and Foundation Plates
The Optimal Control of the Elastic Stress State Using Boundary Loads
The Analysis of Convergence of Finite Element Method for a Foundation Slab on the Bilinear Subgrade
New Numerical Methods for Structural Mechanics Problems in Unbounded Domains
Correct Formulation of the Stability Problem for Timoshenko Beam
The Initial Boundary-Value Problem for a Mathematical Model for Granular Medium
Elasto-Plastic Stability Analysis of the Frame Structures Using the Tangent Modulus Approach
The Algorithm of Solving the Problem of Large Elastic-Plastic Deformation by FEM
Deterministic and Probabilistic Approach of Capacity of the Elements of a Lattice Gird
Multimodal Pushover Analysis for R.C. Bridges
Complex Testing and Rehabilitation Measures of the Bridges (Example of Road Bridge Across the South Morava, Serbia)
Preparation, Installation and Signal Processing of Strain Gauges in Bridge Load Testing
Geodetic Measurement of Vertical Displacements (Illustrated with the Slovenian Viaduct)
On Strength Reserve Assessment for Prismatic Folded Plate Roof Structures
Finite Element Modeling of Porous Material Structure Represented by a Uniform Cubic Mesh
Finite-Element Simulation of Progressive Cross-Section Ellipticity of Single Crystal Samples under Uniaxial Tension
Experimental Investigation and Finite Element Simulation of Fracture Process of Polymer Composite Material with Short Carbon Fibers
Fracture Analysis of Piezoceramic CT-Specimen for Different Types of Crack Face Boundary Conditions
Thermal-Fatigue Analysis of Turbine Discs under Complex Thermo-Mechanical Loading with Account of Plasticity and Creep Effects
Comparison of Rate-Dependent Ferroelectroelastic Phenomenological Models for Prediction of PZT Creep
Analysis of Track Gauge Widening in Curves with Small Radius
Chapter 6: Organization and Planning of Construction Works
Possibilities of Implementing Customer Relationship Management in the Function of Improving the Competitiveness of the Civil Engineering Sector
Recourse Optimization of Construction on a Basis of the Frontal and Rhythmical Stream
Renewal Methods of Construction Machinery According to Technical and Economic Indicators
"Knowledge-Based Economics" in the Innovative Development of the Construction Sphere
New Paradigm of Integrated Housing Development in the Metropolitan Area (Based on the Example of St. Petersburg)
Time is the most Important Resource for Increasing Construction Efficiency
Logistics of a Building Company: Specifics and Methods of Logistics System Management
Quasi Float Time Revealing when Evaluating Construction Schedules Based on Discounting
Method "Earned Value Management" for Timescale Controlling in Construction Projects
Estimation of Economic Efficiency in Selection of Mast Hoist Equipment, Based on Technical Characteristics
Scheduling of Cottage Settlement Building
Residential Stock Management Based on Input-Output Balance Model
Chapter 7: Architecture and Urban Planning
Clustering of City Housing Facilities Based on Self-Organizing Maps
Spatial and Technological Design Principles of Mountain Resort Hotels
Revitalization as the Principle of Architectural Heritage Protection - Case Study of Serbia and Russia
Azerbaijan Hamam, the History and Restoration Specifics
William Richard Lethaby - Architecture, Mysticism and Myth
Investigation of Natural Hazards: Theoretical and Practical Models
Architectural Renovation of Quarter in Mannheim, Germany
Formation of the Architecture of Developing Business Centers in Special Economic Zones with the Use of the Bio-Similar Modeling Principle
Landscape Urbanism of Riverside Territories: Humanization Strategy
Orientational Reaction as a Way of Adjusting to Space
Efficiency of Implementation of Spatial Development Strategies on the Case of Business Zones in Slovenia
Decentralization as a Cause of Spatial Segregation
Houses New Live Build from 50s till 60s in Saint-Petersburg
Daylight Factor Analysis for Different Types of Static Shading Devices: Case Study Location in Podgorica
Redevelopment Project of Shuvalovsky Park
Reconstruction of Apartment in the Meltzer's Apartment House
Architectural Tectonics as a "Living Pattern" of Building Structures
Renovation of Multi-Apartment Building in Latvia
Reconstruction of Courtyards in Historical Buildings of Saint-Petersburg - Ways to Improve Quality of Interior Space
Evolution of Application of Neogothic Forms in the Russian Architecture of the XVIII-XIX Centuries
The Sustainable Strategy of Obsolete Building Conversion to Residential Uses
Optimizing Transport-Logistic Cluster Freight Flows of a Port Megacity on the Basis of GIS
Driver's Reaction Time in Evaluation of the Road Capacity
Origin-Destination Matrix as a Way to Create a Basic Algorithm for Simulation a Load of Transport Network
About the Dynamic Model Formation of the Urban Livelihood System Compatible with the Biosphere
Reforms of St. Petersburg Municipal Services Regulatory Bodies in the First Half of XIX Century
GrimShaw Proposal for Tirana River Shore Regeneration: Survival of the Waterfront
Analysis of Compatibility of Contemporary Residential Housing in Nis with Current Standards in the Republic of Serbia
Chapter 8: Air, Gas and Water Research in Area of Civil Engineering
Assessment of Certainty of Ventilation Processes Mathematical Modeling
Modern Principles of Air Exchange Concept in Premises of Different Purpose
Selection of Hot Water Supply Metering Devices for Residential Buildings
Feasibility Study of the Absorption Chiller Integration
Comparison of Air Conditioning Systems for Advanced Data Centers
Economic Efficiency of Automated Individual Heating Substation (IHS)
Numerical Flows Recovery Analysis for Trunkline Failures
The Air Consumption Estimation of Convection Heaters with Natural Convection and Water Heat Carrier
Modeling of Natural Gas Transportation and Distribution in Low Pressure Gas Pipelines
Characteristic Property of Adsorption Cleaning of Recirculated Air for Heat Chambers for Electric Testing of Electronic Devices
Inspecting and Monitoring the Technical Condition of Sewage Collectors
One-Sludge Denitri-Nitrification System Application in Reconstruction of Biological Treatment Stations in Russian Federation
Innovative Environment Friendly Refurbishment Technologies for Water Supply and Sewage Systems of Sugar Factories
Water Quality Improvement by Additional Filtering through Sorption Loading Modified by Fullerenes
Designing Filtraring Equipment Forwater Wells of the Municipal Water Intakes in the City of Kursk
Determination of Wastewater Purification Index under Joint Action of Several Pollution Sources in Marine Water Areas
Experimental Modeling and Electrochemical Analysis of Salted Oily Wastewaters
Energy Performance of Particle Settling in Cyclones
Chapter 9: Energy Efficiency, Green Buildings and Sustainable Development
Thermal Comfort and Energy Performance Assessment for Residential Building in Temperate Continental Climate
The Influence of the Thermal-Insulating Properties of External Enclosure Structures on the Energy and Opportunity Costs
Energy-Efficient Multi-Comfort Group of Buildings in Svetlorechenskiy Estate
Increase the Energy Efficiency of the Multi-Story Apartment Building
The Increase of the Thermal Shielding Level for a Residence Building of 1-528 KP Series
Development of Energy-Saving Measures for the Multi-Story Apartment Buildings
Study of Operation of Power-Generating Devices of Gaseous Fuels Combustion
New Industrial Energy and Resource Saving Structural Solutions for Public Buildings
Renewable Sources in Passive SIP-House
Rating Energy Efficiency and Sustainability of Buildings by International Standards
Results of Multi Comfort Building Designing
Increasing the Wind Turbine Power Using Aerodynamics Shape of the Building
Energy Efficient Solutions of Power Supply in North Regions
Sustainable City Development: Implementation Practices in Riga
Thermal Insulation Features of Residential Historical Buildings in the Case of Saint-Petersburg
Energy Efficiency of Single-Family Houses in Serbia and Montenegro: Strategy for Upgrading the Performance of Existing Stock
The Role of the State and Citizens to Improve Energy Efficiency
Estimation of Industrial Wastewaters Treatment Efficiency by Biotesting
Energy-Efficient Modernization of the Nobel's Mansion in Saint Petersburg: Solar Energy Supply Potential
Energy-Plus House for the Climatic Conditions of Macedonia
Impact of Thermal Insulation and Type of Windows on Energy Demand of Buildings with Passive House Standard
Climate Changes in the Light of Relation between Highly Developed Countries and the Rest of the World
Definition of Climatic Parameters for Calculation of Energy Performance of Buildings
Structural Design of Energy Efficient Buildings Using Multi-Objective BB-BC Algorithm
Passive Solar Heating: Its Role in Architectural Shaping
The Study of Humidity Conditions of the Outer Walls of a "Passive House" for the Climatic Conditions of Serbia, City Nis
Nearly Zero-Energy Buildings: Optimal Cost of Minimum Energy Requirements
Heat Balance Method Application in Building Energy Performance Simulation
The Architectural Concept of the Building with Low Energy Consumption
Analysis of Micro CHP Potential in Latvia
Laboratory Experiments on the Measurement of the Greenhouse Gases Concentration at the Water-Air Interface by Using a Floating Gas Box Method
Model Calculation of Energy Carriers Expenses on the Basis of Biogas in System Reformer - Fuel Cell for Autonomous Power Supply Systems
Chapter 10: Education and Training in Area of Civil Engineering
Distance Learning System Moodle for Training of Specialists in the Field of Civil Engineering
Autodesk Revit - Key to Successful Training of Highly Qualified Civil Engineers
The Benefits of Authorized Training Center Autodesk for Higher Education Institutions
An Update Procedure of Basic Education Programmes in St. Petersburg Polytechnic University
Results of the Admission Campaign: Which is the Future Specialist in the Field of Civil Engineering?
The Role of the Future Civil Engineers' Motivation in the Foreign Language Learning
Chapter 1: Buildings and Structures
The Brickwork Joints Effect on the Thermotechnical Uniformity of the Exterior Walls from Gas-Concrete Blocks
Calculation Method of Justification of Technical Actions for Prevention of Ice Dams Formation on Buildings with a Pitched Roof
Fire Resistance of Non-Crack Resistant Flexural Reinforced Concrete Elements
Heat and Mass Transfer in Low-Temperature Insulation in Moisture Conditions
Comparison of Different Types of Transparent Structures for High-Rise Buildings with a Fully Glazed Facade
Prodrome in Experimental Investigation the Thermal Shielding Systems in Enclosure Structures
Improvement of the Double Skin Facades
Reduced Thermal Resistance of a Two-Layer Wall Construction
Unsteady Temperature Condition of the Enclosure Structure
Unsteady Airway as an Effective Method of the Ice Melting Prevention on the Building's Roof
Humidity Conditions of Enclosing Structure with Silicate Brick Veneer and Variable Air Gap
Characteristic and Application of Facade System 'Polialpan'
The Glass Ventilated Facades - Research of an Air Gap
The Results of Experimental Determination of Air Output and Velocity of Flow in Double Skin Facades
Improving Technology of Constructing Pre-Fabricated Buildings in the Conditions of Northern Regions
Construction of Temporary Accommodation Camp and Selection of Optimal Type of Building
Analysis of the Masonry Structure Calculation with Vertical Ring Beams According to European Standards
Program- and Goal-Oriented Approach to Organization of Monitoring Deformations of Buildings and Structures
Constitutive Relationships of Concrete and Reinforcing Steel under High Temperatures
Objective Estimation of the Use of Windproof and Weatherproof Membranes in Double Skin Facades
Fire Safeguards of "Plastbau" Construction
The Research of the Effect of Basalt Wool on the Acoustic Isolation of the Floating Floor
Performance Evaluation of High-Rise Complex Construction Depending on Building Site Placement
Using ANN in Process of Seismic Damage Prediction for Residential Buildings
Experimental Testing of Retaining Walls of Precast Elements
Chapter 2: Foundations, Underground Structures
Specific Features of Calculating Underground Structures Erected with Use of Freezing Method
Calculation of Retaining Walls with Anchoring at Different Levels
The Comparison of Pile Load Capacity Based on the Results of Analytical Calculations and Static Tests
Accuracy Appraisal of Pile Simulation by Elastic Linkage
Some Aspects of Maintaining Inclined Tunnel Escalators in St. Petersburg
Effectiveness of Soil Reinforcement Based on Complex Ash-Cement Bonder
Stress-Deformation State in the Rock Massif (Illustrated with the Example of Macedonia)
Improving Technological Processes for Borehole Drilling in Construction Using Vibration Impact
Chapter 3: Hydraulic Engineering Works
Loads from Ice Ridge Keels - Analytical vs. Numerical
Coastal Ice Investigation on the Site of Further Bridge Construction - Sveagruva, Svalbard, Norway
Using of Ice for Constructing Islands in the Arctic Conditions
Problems Concerning Gravel Islands Constructing and Exploitation in the Arctic Conditions
Comprehensive Settlement of the Gravitational Drilling Platform on the Seismic Action
Engineering Properties of Sea Ice Ridges in the Barents Sea in 2012-2014 Years for Evaluation of Ice Loads on Offshore Structures
Ice Regime for Basins and Pumped-Storage Facilities
Hydropower Potential Estimations and Small Hydropower Plants Siting: Analysis of World Experience
Multicriterion Optimization of Power Sites Location on the Watercourse
Impact Wave on Port Mole in during Construction
Experimental Study of Tsunami-Type Waves Impact on Soil near Foundation of Offshore Gravitational-Type Platforms
The Influence of Tectonic Faults on a Stress-Strain State of a Large Concrete Dam
Geotechnical Researches for Proving the Design Decisions for Reconstruction of the Dam on the Creek Pevek
Characteristics of Bulk Carriers with Respect to the Developing Export Coal Terminals on the Far East of Russia
Ensuring the Reliability of Earth Dams in Complex Hydrogeological Conditions
Empirical-Statical-Dynamical (ESD) Methodology for Extrapolation of Rock Mass Properties for Construction of Tunnels
Enhanced Mualem-Van Genuchten Approach for Estimating Relative Soil Hydraulic Conductivity
Two-Component Incompressible Fluid Model for Simulating the Cohesive Soil Erosion
Chapter 4: Building Materials and Products
Local Data Flow Principles in Porosity of Materials
Influence of Chemical Additives on Radiation Stability of Concrete - Theoretical Basis and Evaluation Method
Heat Insulation Materials Based on Cenospheres
Improving the Durability of Protective Materials Based on Inorganic Binders when Exposed to Short-Wave Radiation
Application of Styrofoam in the Elements of Building Constructions
Destruction of Monuments' Materials by Organic Acids - Micromycetes Metabolites
Testing of the Mechanical Properties of Masonry Walls - Determination of Compressive Strength
Effect of Air-Entraining Agent LHD on the Technological Properties of Concrete Mix Containing Superplasticizer S-3
An Impact of Carbon Nanostructured Additives on the Kinetics of Cement Hydration
Thermal Cracking Resistance in Massive Concrete Structures in the Winter Building Period
Comparison of European and Russian Technical Documentation for Structural Use of Concrete
The Influence of Based on Polyalcohols Additive on the Cement Paste Shrinkage
Property Changes of Thermal Insulation Material due to the Effects of Environmental Conditions
Influence of Plasticizing and Siliceous Additives on the Strength Characteristics of Concrete
The Influence of Precompression on Strength and Strain Properties of Concrete under the Effect of Elevated Temperatures
Fiberglass Reinforcement for Concrete
Fireproofing Cemented Fiber Vermiculite-Concrete Composites with Application Volcanic Ash
Effect of Modifying Admixtures on the Cement System Hydration Kinetics
Short-Time Creep of Concrete
Kinetics of Hydration and Hardening Processes in Clinkerless Slag-Alkaline Binder Materials
Dependence of Relative Decreasing in Strength by Rate of Strain for the New Rapid Method for Determination of Concrete Frost Resistance
Development of the Nanomodified Filler for Asphalt Concrete Mixes
Optimization of Provide Compositions Bitumen Emulsions, for Example the Cationic Emulsifier
Salt Corrosion of Masonry Mortar
Influence of Cladding Material on the Vapor Permeability of Lightweight Expanded Clay Aggregate (LECA) Concrete
Use of Epoxy Fluoroplastic Coatings in Friction Pendulum Bearings
Influence of Synthetic Fibers Dispersed Reinforced Concrete
Analysis of Behavior of a Lattice Girder According to Theory of Plasticity with Link Elements
Determination of the Critical Duration of the First Heating of Heavy Concrete by the Criterion of the Maximum Strength Reduction
Influence of High-Porous Filling Materials and Mineral Fiber on Thermal and Fire Resistant Properties of Aerated Composites
Special Aspects of Hydration Process of Microfine Cement
Novice Methodology in Preserving Prestressed Cables by Injection of a Special Gel
Theory and Practice of Functioning Machines for Vibratory Agitation
Construction of Road Embankment with Waste Materials
Chapter 5: Applied Mechanics in Material Science, Static and Dynamic Loads of Structures and Facilities
Application of Continuum Damage Mechanics Approach for the Strength Analysis of Reinforced Concrete Constructions
Application of Stepped Isothermal Method for Prediction the Creep Behavior of Extruded Polypropylene Geogrid
Design of Lightweight Glass-Fibre-Reinforced Epoxy I-Beam for Structural Applications
Modeling of Concrete Behavior under Compression
Geometrically Nonlinear Rods Theory - Comparison of the Results Obtained by Cosserat-Timoshenko and Kirchhoff's Rod Theories
The Effect of Weathering and Biological Exposure on the Tensile Properties of Nonwoven Geotextile
Development and Investigation of Mechanical Properties of Glass Fiber Reinforced Concrete
Finite Element Modeling of Steel Pipeline Reconstruction Using Fiberglass Composite Material
Two-Dimensional Surface Fatigue Crack Propagation and its Finite Element Simulation
Simulation and Experimental Investigation of Deformation and Fracture of the Masonry
Bending of Laminated Composite Plates
A Posteriori Error Control at Numerical Solution of Plate Bending Problem
Modeling Nonlinear Deformation and Destruction Masonry under Biaxial Stresses Part 1 - Masonry as Simulation Object
Local Buckling of Cold-Formed Steel Members with Edge Stiffened Holes
Strength Evaluation of a Linear Extended Structure on a Statically Inhomogeneous Foundation
Advanced Method for Semi-Rigid Joints Design
Prestressed Cladding Elements for Tensioned Structures
Reticular-Stretched Thermo-Profile: Buckling of the Perforated Web as a Single Plate
Optimization Models of Heat Treatment Process of Masonry in the Winter due to a Stationary Heating System Constructed Buildings Oil Production Complex
Calculation of Combined Structure and Installation Roof Systems Taking into Account Structural Nonlinearity Factor
Crack Resistance Criteria for Reinforced Concrete Beams with Corrosion Damage in Strength Resource Assessment
Mathematical Analogy between Non-Uniform Torsion and Transverse Bending of Thin-Walled Open Section Beams
Comparison of the Bearing Capacity of LST- Profile Depending on the Thickness of its Elements
Strength and Stability of Arched Frame Structures Made of Brittle Material
Friction of Rubber on the Concrete Surface Treated with a Remedy against Drying out
The Typical Roof Structure Project Based on Trusses Made of Roll-Welded RHS Pipes Development
The Computational Model of Spatial Formation of Cracks in Reinforced Concrete Constructions in Torsion with Bending
Probable Errors of Dynamic Method at Conservative System Stability Analysis
Justification of Using Delta-Functions in the Theory of Shells Featuring Irregularities
Calculation on Formation of Longitudinal Cracks in Reinforced Concrete Structures Taking into Account Nonlinearity of Concrete Straining
Modeling Nonlinear Deformation and Destruction Masonry under Biaxial Stresses Part 2 - Strength Criteria and Numerical Experiment
Quadrilateral Finite Element for Analysis of Reinforced Concrete Floor Slabs and Foundation Plates
The Optimal Control of the Elastic Stress State Using Boundary Loads
The Analysis of Convergence of Finite Element Method for a Foundation Slab on the Bilinear Subgrade
New Numerical Methods for Structural Mechanics Problems in Unbounded Domains
Correct Formulation of the Stability Problem for Timoshenko Beam
The Initial Boundary-Value Problem for a Mathematical Model for Granular Medium
Elasto-Plastic Stability Analysis of the Frame Structures Using the Tangent Modulus Approach
The Algorithm of Solving the Problem of Large Elastic-Plastic Deformation by FEM
Deterministic and Probabilistic Approach of Capacity of the Elements of a Lattice Gird
Multimodal Pushover Analysis for R.C. Bridges
Complex Testing and Rehabilitation Measures of the Bridges (Example of Road Bridge Across the South Morava, Serbia)
Preparation, Installation and Signal Processing of Strain Gauges in Bridge Load Testing
Geodetic Measurement of Vertical Displacements (Illustrated with the Slovenian Viaduct)
On Strength Reserve Assessment for Prismatic Folded Plate Roof Structures
Finite Element Modeling of Porous Material Structure Represented by a Uniform Cubic Mesh
Finite-Element Simulation of Progressive Cross-Section Ellipticity of Single Crystal Samples under Uniaxial Tension
Experimental Investigation and Finite Element Simulation of Fracture Process of Polymer Composite Material with Short Carbon Fibers
Fracture Analysis of Piezoceramic CT-Specimen for Different Types of Crack Face Boundary Conditions
Thermal-Fatigue Analysis of Turbine Discs under Complex Thermo-Mechanical Loading with Account of Plasticity and Creep Effects
Comparison of Rate-Dependent Ferroelectroelastic Phenomenological Models for Prediction of PZT Creep
Analysis of Track Gauge Widening in Curves with Small Radius
Chapter 6: Organization and Planning of Construction Works
Possibilities of Implementing Customer Relationship Management in the Function of Improving the Competitiveness of the Civil Engineering Sector
Recourse Optimization of Construction on a Basis of the Frontal and Rhythmical Stream
Renewal Methods of Construction Machinery According to Technical and Economic Indicators
"Knowledge-Based Economics" in the Innovative Development of the Construction Sphere
New Paradigm of Integrated Housing Development in the Metropolitan Area (Based on the Example of St. Petersburg)
Time is the most Important Resource for Increasing Construction Efficiency
Logistics of a Building Company: Specifics and Methods of Logistics System Management
Quasi Float Time Revealing when Evaluating Construction Schedules Based on Discounting
Method "Earned Value Management" for Timescale Controlling in Construction Projects
Estimation of Economic Efficiency in Selection of Mast Hoist Equipment, Based on Technical Characteristics
Scheduling of Cottage Settlement Building
Residential Stock Management Based on Input-Output Balance Model
Chapter 7: Architecture and Urban Planning
Clustering of City Housing Facilities Based on Self-Organizing Maps
Spatial and Technological Design Principles of Mountain Resort Hotels
Revitalization as the Principle of Architectural Heritage Protection - Case Study of Serbia and Russia
Azerbaijan Hamam, the History and Restoration Specifics
William Richard Lethaby - Architecture, Mysticism and Myth
Investigation of Natural Hazards: Theoretical and Practical Models
Architectural Renovation of Quarter in Mannheim, Germany
Formation of the Architecture of Developing Business Centers in Special Economic Zones with the Use of the Bio-Similar Modeling Principle
Landscape Urbanism of Riverside Territories: Humanization Strategy
Orientational Reaction as a Way of Adjusting to Space
Efficiency of Implementation of Spatial Development Strategies on the Case of Business Zones in Slovenia
Decentralization as a Cause of Spatial Segregation
Houses New Live Build from 50s till 60s in Saint-Petersburg
Daylight Factor Analysis for Different Types of Static Shading Devices: Case Study Location in Podgorica
Redevelopment Project of Shuvalovsky Park
Reconstruction of Apartment in the Meltzer's Apartment House
Architectural Tectonics as a "Living Pattern" of Building Structures
Renovation of Multi-Apartment Building in Latvia
Reconstruction of Courtyards in Historical Buildings of Saint-Petersburg - Ways to Improve Quality of Interior Space
Evolution of Application of Neogothic Forms in the Russian Architecture of the XVIII-XIX Centuries
The Sustainable Strategy of Obsolete Building Conversion to Residential Uses
Optimizing Transport-Logistic Cluster Freight Flows of a Port Megacity on the Basis of GIS
Driver's Reaction Time in Evaluation of the Road Capacity
Origin-Destination Matrix as a Way to Create a Basic Algorithm for Simulation a Load of Transport Network
About the Dynamic Model Formation of the Urban Livelihood System Compatible with the Biosphere
Reforms of St. Petersburg Municipal Services Regulatory Bodies in the First Half of XIX Century
GrimShaw Proposal for Tirana River Shore Regeneration: Survival of the Waterfront
Analysis of Compatibility of Contemporary Residential Housing in Nis with Current Standards in the Republic of Serbia
Chapter 8: Air, Gas and Water Research in Area of Civil Engineering
Assessment of Certainty of Ventilation Processes Mathematical Modeling
Modern Principles of Air Exchange Concept in Premises of Different Purpose
Selection of Hot Water Supply Metering Devices for Residential Buildings
Feasibility Study of the Absorption Chiller Integration
Comparison of Air Conditioning Systems for Advanced Data Centers
Economic Efficiency of Automated Individual Heating Substation (IHS)
Numerical Flows Recovery Analysis for Trunkline Failures
The Air Consumption Estimation of Convection Heaters with Natural Convection and Water Heat Carrier
Modeling of Natural Gas Transportation and Distribution in Low Pressure Gas Pipelines
Characteristic Property of Adsorption Cleaning of Recirculated Air for Heat Chambers for Electric Testing of Electronic Devices
Inspecting and Monitoring the Technical Condition of Sewage Collectors
One-Sludge Denitri-Nitrification System Application in Reconstruction of Biological Treatment Stations in Russian Federation
Innovative Environment Friendly Refurbishment Technologies for Water Supply and Sewage Systems of Sugar Factories
Water Quality Improvement by Additional Filtering through Sorption Loading Modified by Fullerenes
Designing Filtraring Equipment Forwater Wells of the Municipal Water Intakes in the City of Kursk
Determination of Wastewater Purification Index under Joint Action of Several Pollution Sources in Marine Water Areas
Experimental Modeling and Electrochemical Analysis of Salted Oily Wastewaters
Energy Performance of Particle Settling in Cyclones
Chapter 9: Energy Efficiency, Green Buildings and Sustainable Development
Thermal Comfort and Energy Performance Assessment for Residential Building in Temperate Continental Climate
The Influence of the Thermal-Insulating Properties of External Enclosure Structures on the Energy and Opportunity Costs
Energy-Efficient Multi-Comfort Group of Buildings in Svetlorechenskiy Estate
Increase the Energy Efficiency of the Multi-Story Apartment Building
The Increase of the Thermal Shielding Level for a Residence Building of 1-528 KP Series
Development of Energy-Saving Measures for the Multi-Story Apartment Buildings
Study of Operation of Power-Generating Devices of Gaseous Fuels Combustion
New Industrial Energy and Resource Saving Structural Solutions for Public Buildings
Renewable Sources in Passive SIP-House
Rating Energy Efficiency and Sustainability of Buildings by International Standards
Results of Multi Comfort Building Designing
Increasing the Wind Turbine Power Using Aerodynamics Shape of the Building
Energy Efficient Solutions of Power Supply in North Regions
Sustainable City Development: Implementation Practices in Riga
Thermal Insulation Features of Residential Historical Buildings in the Case of Saint-Petersburg
Energy Efficiency of Single-Family Houses in Serbia and Montenegro: Strategy for Upgrading the Performance of Existing Stock
The Role of the State and Citizens to Improve Energy Efficiency
Estimation of Industrial Wastewaters Treatment Efficiency by Biotesting
Energy-Efficient Modernization of the Nobel's Mansion in Saint Petersburg: Solar Energy Supply Potential
Energy-Plus House for the Climatic Conditions of Macedonia
Impact of Thermal Insulation and Type of Windows on Energy Demand of Buildings with Passive House Standard
Climate Changes in the Light of Relation between Highly Developed Countries and the Rest of the World
Definition of Climatic Parameters for Calculation of Energy Performance of Buildings
Structural Design of Energy Efficient Buildings Using Multi-Objective BB-BC Algorithm
Passive Solar Heating: Its Role in Architectural Shaping
The Study of Humidity Conditions of the Outer Walls of a "Passive House" for the Climatic Conditions of Serbia, City Nis
Nearly Zero-Energy Buildings: Optimal Cost of Minimum Energy Requirements
Heat Balance Method Application in Building Energy Performance Simulation
The Architectural Concept of the Building with Low Energy Consumption
Analysis of Micro CHP Potential in Latvia
Laboratory Experiments on the Measurement of the Greenhouse Gases Concentration at the Water-Air Interface by Using a Floating Gas Box Method
Model Calculation of Energy Carriers Expenses on the Basis of Biogas in System Reformer - Fuel Cell for Autonomous Power Supply Systems
Chapter 10: Education and Training in Area of Civil Engineering
Distance Learning System Moodle for Training of Specialists in the Field of Civil Engineering
Autodesk Revit - Key to Successful Training of Highly Qualified Civil Engineers
The Benefits of Authorized Training Center Autodesk for Higher Education Institutions
An Update Procedure of Basic Education Programmes in St. Petersburg Polytechnic University
Results of the Admission Campaign: Which is the Future Specialist in the Field of Civil Engineering?
The Role of the Future Civil Engineers' Motivation in the Foreign Language Learning