Advances in Civil Structures

Preface and Conference Organization
Chapter 1: Structural Engineering
Optimization and Suggestions of Design for RC Frames with Special-Shaped Columns Based on Chinese Specification
Structural Strength Analysis of Main Crane Pedestal of the Jack-Up Wind Turbine Installation Vessel
Wavelet-Based Multilevel Discrete-Continual Finite Element Method for Local Plate Analysis
Study on Mechanical Characteristic of Two-Layer Steel Plate Concrete Shaft Lining under Non Uniform Pressure
Analysis and Design of Cable-Membrane Architectural Structure
Development Status of Modern Bamboo Structure Building
Mechanics Analysis and Construction Method of Prestressed Concrete Pipe
Wind Loadings on the Low-Rise Buildings around the Hillside in Atmospheric Boundary Layer
Simulation Analysis on Mechanics of Large-Span Enclosure Steel Structure Used in the Subway Station
An Engineering Mechanics Based Approach to Predict Safety of RC Columns under High Temperatures
Wind-Induced Dynamic Analysis and Construction Measures of Large Diameter Spherical Tank
Push-Out Test on Shear Connectors Embedded in UHPC
The Influence of Initial Guy Cable Prestress on Single-Mast Guyed Towers Mechanical Properties
Finite Element Analysis on Crack Resistance Behavior of the Abnormal Joint of SRC Column and RC Beam
Method for Evaluating the Flexural Stiffness Bar of Reinforced Concrete Structures
Shear Strength of Connections between Concrete Filled Steel Tubes and Beams
Impact Response and Failure Mode for Single-Layer Geodesic Spherical Domes under Impact Load
Research on the Stiffness of Concrete Filled Steel Tubular Column and Steel Beam Joint with Stiffening Ring
Preliminary Research on Mechanical Behavior of Steel Frame Filled with Steel Plate Shear Wall after Exposure to Overall Stage of Fire
Bearing Capacity Calculation of Full-Scale Reinforced Concrete Beam-Column Joints Based on a Strut-and-Tie Model
Research on Ultimate Moment of Top-and-Seat Angle Connections in Semi-Rigid Steel Frames
The Correction of Estimation Theory on Cable's Parameters in Prestress-Mega-Brace Steel Frame Structure
Design Recommendation for Large Depth-to-Span Ratio and Opening of Single-Layer Spericallattice Shells
Study on Influence of Temperature to Section Deformation of Steel Box Girder during Cantilever Installation
Dynamical Model Updating Based on Gradient Regularization Method
Comparison and Analysis of the Artificial Boundary in Homogeneous Elastic Semi-Infinite Foundation
Time-Domain Analysis for Structure Dynamic Response Induced by Human
Experiment Study and Nonlinear Analysis of a New Skip-Floor Staggered Shear Wall Structure for High-Rise Buildings
Finite Element Modelling of Concrete-Filled Steel Tube Reinforced Concrete Stub Columns under Axial Compression
Research on Non-Destructive Testing for Defects of Steel Bar in Concrete
Numerical Simulation on Beating Capacity of Steel Reinforced Light Aggregate Concrete Beam
Parametric Analysis on Shear Lag Effects of Box-Girder Beam
Research on the Mechanism of Prestressed Loss for Curving Hole of Prestressed Concrete Structure Caused by Frictional Resistance
Study on Shape Coefficient of Three-Parameters Power Model
Out-of-Plane Stability Analysis of U-Section Pin-End Steel Arch
Research on the Joint of Concrete-Filled Steel Tubular Column and Steel Beam
Research on Dynamic Characteristics of Isolated System for Irregular Structures
Calculations of the Elastic Modulus and Internal Stresses of Orthogonal Symmetric Laminated Plates
Design of a Steel Pipe Truss for a Hot Spring Spa
Reinforcement and Fiber to Induce Ductile Behavior of Ultra High Performance Steel Fiber Concrete
Analysis of Transmission Tower Structure with Pushover Method
Analysis of Glass Elements Fasted into the Steel Frame
On the Nodes' Anti-Crack and Load Bearing of SRHC Interior Joint with Different Axial Compression Ratios
Plastic Analysis on the Semi-Rigid Steel Frame-Composite Steel Plate Shear Wall Structure
Parameters Study of Steel Concentrically-Braced Frames Using IDA
To Improve the Appearance Quality of Concrete Special-Shaped Frame Column
Flexural Behavior of Prestressed Concrete Composite Slab with Corrugated Steel Web
Buckling Analysis Method and Application of a Square Steel Tube Member with Initial Geometric Imperfection under Axial Compressive Load and Bending Moment
Theory Analysis on Buckling of a Square Steel Tube Member Strengthened by CFRP with the Initial Imperfection
Study on a New Kind of Pile-Stinging Prestressed Concrete Pipe Pile
The Determination of Friction Coefficient between Parallel Wires in Stay Cables
Analysis of Composite Timber-Concrete Ceiling Structure by Finite Element Method
Test Study on the Mechanical Behavior of Recycled Aggregate Concrete Wall-Beam
Finite Element Analysis of Cold-Formed Lipped Channel Columns with Web Stiffener
The Mechanical Behavior Analyses and Optimization on Large Wind Turbine Frustum Tower Structure
Experimental Study on Mechanical Behavior of Wind Turbine Frustum Tower
Experimental Research on Steel Frame Structures of Mobile Buildings
Effects of Geometrical Factors on Wind Pressure Characteristics of Cylindrical Roofs with Wind Tunnel Tests
Buckling Analysis of Stiffened Plate with Local Imperfections under In-Plane Bending
Research and Building of Ontology Base for Structural Experiment
Research on the Nonlinear Stability of the Steel Spatial Arch Truss with 120m Span and 0.2 Rise-Span Ratio
Parameter Influence Analysis of Stability for Suspendome Structure
The Calculation of Flexural Capacity of Reinforced Concrete T-Section Beam under the Influence of Fire
Study on Flexural Stiffness Reduction Factor of Reinforced Concrete Column with Equiaxial T Shaped Section
The Preliminary Calculation Process of Strut-and-Tie Model
The Alculation Method of Stable Bearing Capacity of Portal Frame
Axial Compression Performance Research of RPC Filled Steel Tube Columns Based on the Unified Strength Theory
Influence and Analysis on the Bearing Capacity of Reinforced-Concrete-Frame Node in Beam and Plate's Constraint
Spectral Characteristics and Correlation of Dynamic Wind Loads of a Typical Super-Tall Building
Finite Element Analysis of Reinforced Concrete Beam-Column Joint under Low Cyclic Loading with Different Load Systems
Study on Mechanical Property of Reinforced Concrete (RC) Beams under Sea Water
Study on Ductility Performance of T-Shaped Section Steel Reinforced Concrete Columns
Experimental Research on Load-Bearing Capacity of Frame Columns with Construction Joint under Low-Cyclic Reversed Loading
Study on Mechanical Behavior of Steel Plate Support with Oval Bolt Hole in Space Frame Structure under Combined Action of Shear Force and Tensile Force
Three-Dimensional Dynamic Analysis on Soil-Structure Applying Mixed Linear-Nonlinear Substructure Method
Study on Plastic Hinge Length and Limit Curvature of RC Column
Seismic Strengthening of Masonry School Building with Steel Mesh Mortar Splint
Study on Dynamic Characteristics and Parameter Sensitivity of Three Spans Prestressed Continuous Beam
Research Progress on Bending Strength Calculation of Biaxial Compression-Bending Reinforced Concrete Column
Influence of Concrete Strength of the Core of the Joints on the Holistic Resistant Behavior of Super High-Rise Structure
Stimulation Analysis of High Temperature Bearing Capacity of Steel Reinforced Concrete Column Strengthened by CFRP
Bend-Bearing Capacity of Concrete-Filled Square Steel Tube and T-Beam
The Static Wind Load Research of a Flat Box Girder Based on the Numerical Wind Tunnel
Bending Test of the Composite Steel-Timber Beam
Analysis and Prospect of Size Effect on Normal Section Bearing Capacity of Reinforced Concrete Column
Towards Light-Weight Composite Construction: Innovative Shear Connector for Composite Beams
Study on Failure Mechanism of Reinforced Concrete Frame with Construction Joint
Failure Mechanism of a Steel Frame under Oblique Seismic Action
Analysis and Research on Reinforcement and Reconstruction Method of Adding Shear Wall for Multi-Story Frame Structure
Simulation Analysis of Longitudinal Shear Bond Performance of Lightweight Aggregate Concrete Composite Slab
Fatigue Stiffness Analysis of Corroded RC Beams
Mechanical Behavior Research for the Interior Joint of New Light-Weight Portal Rigid Frame (II)
Experimental Research on the Thermal Damage of Concrete
Dynamic Stability Analysis of Steel-Concrete Composite Ribbed Shell under Vertical Step Loads
Discussion of the Masonry Structure Building Underpinning Method
Study of Free Vibration Characteristic of Continuous Box-Girder Based on Hamilton Principle
The Research of Test on Steel Frame Beam-Column Connections with Rib Top and Seat Angle and Angle with Two Web Node Energy Consumption
Application and Discussion of Pressure Grouting Technology in Bored Piles
Buckling Behavior of Elliptical Shells of Changing Thickness under Uniform Axial Compression
Mechanical Properties of Roller Compacted Concrete under Triaxial Stress State
Buckling Analysis of Short Cylinders of Uniform Thickness under Uniform External Pressure
Analysis of Mechanics Characteristics of Prestressed Steel Column in High Temperature (Fire) Condition
Mechanical Mechanism of the Post-Grouting Pile
Deformation Characteristics of Roller Compacted Concrete under Triaxial Stress State
Analysis of Mechanics Characteristics of Prestressed Steel Beam in High Temperature (Fire) Condition
Dynamic Analyses of Semi-Rigid Connection Low Yield Point Steel Frames
The Application of Endochronic Damage Constitutive Model in Cracking Analysis of Mass Concrete
Structural Damage Assessment by an Improved Flexibility Sensitivity Method
Seismic Design of the High-Rise Building Structure and Sustainable Development
Experimental Investigation on Flexural Bearing Capacity of Concrete Beams Reinforced with CFRP-PCPs Composite Rebars
Research on the Seismic Performance of Zipper Frames
Optimization System Design for Steel Structure Based on Advanced Complex Method
Stiffness and Energy Dissipation of Steel Coupling Beam Embedded in the PSH2C and Normal Concrete Shear Wall
The Experimental Study on Mechanical Performance of Multi-Span Column-Supported Assembly Box Concrete Hollow Floor
The Calculation of the Two-Layer Beam Model on an Elastic Basis with Variable Modulus of Subgrade Reaction
Comparison of Multiple Freeze-Thaw Cycles of High-Performance Concrete Test Beams and Concrete Beams Loaded Test
Study for Dynamic Stability Behavior of I-Section Cantilever Beam under Axis Compressive Load
Numerical Study on Precast RC Wall Panels with Angle Steel Boundary Components
Individual Anchored Strength Experimental Research for Prestressed End with Local Area Pressure
Debonding Behaviors of CFRP Strengthened RC Beams with Weak Interfaces
Experimental Study on Flexural Behavior of Different Damages Prestressed Concrete Hollow Slabs Strengthened with CFRP
Study on Seismic Behavior of Large Bay Brick Masonry Structures with Fewer Internal Longitudinal Walls
Mechanical Properties of New Type Cold-Formed Steel Box-Shaped Component Welding Section Members
Research on the Axial Compressive Performance of the Concrete-Filled Steel Shear Wall with Binding Bars
Temperature Field Analysis of Steel Reinforced Concrete Column in Fire
Predictive Method for Economic Indicators of High-Rise Frame-Tube Structures
The Static Stability Analysis of Single-Story Steel Frames with I-Section Columns
Effects of Crossing Angle on the Behavior of Buried Steel Pipelines Crossing Fault
Analysis on the Solar Collector Bracket with Finite Element Method
Design on a Total Precast Concrete Parking Structures
Long-Term Deformations of Steel-Reinforced Concrete Columns under Sustained Axial Loads
The Effect of Confinement Method and Specimen End Condition on Behavior of FRP-Confined Concrete under Concentric Compression
The Antiknock Property Research of L Steel Reinforced Concrete Special-Shaped Column in the Different Thicknesses of Steel Bone in Blast Loads
An Improved Analysis Method on the Deformation Shape of Curved Plate Girders by Cold Bending
Dynamic Response Analysis of the T-Shaped Steel Reinforced Concrete Column under Different Impact Conditions
Theoretical Analysis of the Impact on the Rod Bending about the Axial Force
The Hysteretic Property Study of Cross Steel Reinforced Concrete Special-Shaped Column in Different Axial Compression Ratios
Study on the Diaphragm Effect of the Beam Type Bridge
The Element Analysis on Hysteretic Property of Cross Steel Reinforced Concrete Special-Shaped Column in Different Rates of Steel Bone
Failure Mode Attribution Analysis of PBL Shear Connector
Axial Compression Ratio on Seismic Performance of CFPR Steel Tube Composite Columns Filled with Steel Reinforced Concrete
Design Method on Shear Behavior of Single Tapping Screw Connections in Cold-Formed Thin-Wall Steel Structures
Summary of Study on Composite Concrete Slabs
Constitutive Relationship of FRP Reinforced Column Plastic Hinge Zone Based on Pushover Analysis
Research on Stability of Pretensioned Spherical Reticulated Mega-Structure
Analysis of the Shock-Absorbing Performance of Buckling Restrained Brace for High-Rise Buildings
Calculation of Load-Carrying Capacity of Square Concrete Filled Tube Columns Based on Neural Network
An Experimental Study on the Flexural Behavior of Post-Tensioned Concrete Beams with CFRP Tendons
Encased-Steel-Reinforced Concrete Composite Beam and its Ultimate Strength Analysis
FEM Analysis and Experimental Research of Corner Joints in Gabled Frames
Experimental Study on Lateral Stiffness and Dynamic Properties of Steel Drive-in Storage Racks
Hysteretic Behavior of Reinforced Concrete Coupling Beams with Diagonal Headed-Bars
Experimental Analysis on Composite Wall Plate Cracking of Steel Structure in Yunnan Area
FE Analysis on the Structural Behavior of Reinforced Concrete Beam Damaged by Fire
Behavior and Design of Web-Slotted Cold-Formed Channels Experiencing Local-Distortional-Global Interactive Buckling
Axial Capacity of Steel Angles with Local Deformation
The Strength and Deformation Analysis on the Top Steel-Tube Truss Supporting System of Silo
Mechanism of the Frame-Supported Masonry Shear-Wall Structure with Inter-Story Isolation
The Element Analysis on Hysteretic Property of Cross Steel Reinforced Concrete Special-Shaped Column in Different Concrete Strengths
Research on Practical Design Method of Single-Layer Lattice Shell Components
ANSYS Simply Supported Deep Beams Based on the Study of Mechanical Properties
Deformation Characteristic Evaluation of Large Oil Storage Tanks under the Planar Inclined Foundation
Research on Behavior of Rectangular CFST Stub Columns with Binding Bars under Axial Compression
Structural Design of Yunnan Ruili Spa Resort Sightseeing Tower
Design Method of Horizontal Braces Unlocated at Middle of Columns with Fixed-Ended Column Base
Finite Element Analysis on Frame Structure of Light Steel Temporary Buildings
FEM Analysis of Long-Span Steel Structure Considering Bearings Size Effect and Friction Characteristic
The Application of Plate Buckling Theory in the Steel Structures
Analysis on Bearing Capacity of Double Back-to-Back Cold-Formed Thin-Walled C Steel Composite Column with Gusset Plate
Finite Element Analysis of Wind Turbine Tower
Advances in Experimental Study on Seismic Performance of Double C Steel Joints with Gusset Plate
Experimental Study on Behavior of Shear Walls Built with Precast Two-way Hollow Slabs for Different Axial-Load Ratios
Analysis of Residual Displacement of Combined Base Isolated Structure
Chapter 1: Structural Engineering
Research on Bearing Capacity Calculation of Parabolic Steel Arch Structure under Full-Span and Half-Span Loading
The Comparative Analysis on Calculation Methods of Vertical Seismic Response to Suspended-Dome Structure
The Application of ABAQUS in Cast-Steel Joints Elastic-Plastic Analysis
Numerical Simulation of Bond Behavior for Adhesive Anchor in Steel-to-Concrete Connection Exposed to Fire
Comparative Analysis of Finite Element Method and Analytical Method on the Truss
Nonlinear Finite Element Analysis on the Abnormal Exterior Joint of Steel Reinforced Concrete
Calculation Method of Deformation and Inner Force of a Sheet Pile Wall with Relieving Platform
Numerical Simulation of Deep Beam in Short-Leg Shear Walls Structure
Low Tension-Tension Cycle Fatigue Properties of 301 Stainless Steel Thin Sheets
Analysis and Test of the Inflatable Tubes of ETFE Foils
Effect of Cushion Layers on Mechanical Characteristics of Spiral Case Structure in Hydropower Station
Nonlinear Numerical Analysis of Frame Side Joint
Numerical Analysis and Field Observation of Drawn Force of Sliding Pipe Method for Ultradeep Diaphragm Wall
Study on the Effect of Grid Column on Seismic Performance of Improved Multi-Ribbed Slab Structure
Key Technology Analysis of Construction of Joint-Pipe Method for Ultra-Deep Diaphragm Wall
Experimental Research of Cable in Plate Method
Rationalization of Structural Stiffness of Offshore Platform with Rocking-Wall
Experimental Study on Relationship between Half-Cell Potentials and Load Carrying Capacity of Corroded Reinforced Concrete Shear Walls
Introduction for Flexible Overall Hoisting Method for Extra Large Solder Ball Grid Roof
Relationship between Half-Cell Potentials and Load Carrying Capacity of Corroded Reinforced Concrete Beam-Column Joints
Stability Analysis of a New Frame Formwork Support
Numerical Analysis of Continuous Beam of Reinforced Concrete under Fire
Structure Seismic Response Analysis under Pile-Soil-Structure Interaction
The Failure Process Analysis of Reinforced Concrete Beams with Different Steel Reinforcement Ratio
Study on Failure Trend of Double Column Deflection Machine Structure on Basis of Static Strength Analysis
Numerical Analysis on a New Type Cross-Shaped Frame Joint of Steel Reinforced Concrete Special-Shaped Column
Study on Failure Trend of Double Column Tri-Axis Deflection Machine Structure on Basis of Static Strength Analysis
Research on Adhesive Property of Reinforced Concrete Sructure Strengthened with Near-Surface Mounted FRP Bars
Analysis of Ductility Features in Bearing Failure Process for Cable-Strut Arch Structures under the Load Combined Full Span and Half Span Loads
Study on Bend Performence of Binding Bars Prestressed Steel Box Concrete Beam
Research on Space Frame Structure in Regard of Member Initial Stress
Strut- and- Tie Model Method for Partial Compression about Prestressed Tendon Constraint Concrete
An Experimental Study and Analysis of Full Process of External Prestressing CFRP Concrete Box Girder
Study on Mechanical Performance of Wall-Column Subassembly in New Precast Reinforced Concrete Frame-Shearwall Structure
Simulation of Flexural Behavior of Reinforced Concrete Beams under Impact Loading
Study on Thermal Crack Control of Multi-Tower Large Basement Structures
Experimental Study on Behavior of RC Beam Strengthened with Ridged Aramid Fiber Plate Strip
Finite Element Analysis of Natural Vibration Frequency for Unbounded Prestressed Concrete Beams
Transformation Design of a High-Rise Building
Experimental Study on Natural Frequency Variation Regulations of Simply Supported Externally Prestressed Concrete Beams
Seismic Time-History Analysis of Gravity Dam Based on Nonlinear Finite Element Method
The Practical Calculation Charts to Determine Column Effective Length of Framework and Bent Framework
Suspend-Dome Static Behavior Analysis
Model Test Research on the Concrete Creep and Shrinkage Effects on the Long-Time Deflection of Steel Concrete Composite Beam
A New Designed Hot Tearing Apparatus Based on the Applied Forces
Effect of Temperature on Electrochemical Behavior of Stainless Steel in Phosphoric Acid
Chapter 2: Monitoring and Control of Structures
Stress-Induced Magnetic Signals for Structural Health Monitoring of Civil Infrastructures
Damage Detection for Cantilever Beam Structures Using Two-Stage Method
Structural Health Monitoring for Steel Structures
Application and Improvement of PSO Algorithm in Structural Damage Diagnosis
Application of Strain Mode Difference in the Damaged Beam Damage Detection
Crack Survey and Cause Analysis of a Complex in Huatugou of Qaidam Basin
Analysis of Effective Pre-Stress and Stiffness of the Continuous Rigid Frame Bridge in Service Based on Inversion Theory
Vibration Control of Offshore Platform Based on Outrigger Damping System
Nondestructive Testing Method of Vertical Prestressed Finishing Twisted Steel Tension
Theoretical Research on Two Improved Optimal Sensor Placement Methods
Identification of Fracture Damage of the Space Truss Structure Based on the Combined Application of Wavelet Analysis and Strain Mode Method
Analysis on Defects Location during Rebar Pull-Out Test by Acoustic Emission Technique
Research of Vertical Prestressed Losses during Construction Process of PC Continuous Box Girder Bridge
A New Magneticrheological Damper Nonlinear Bingham Hysteretic Model and ANSYS Implementation
Deformation Monitoring and Evaluating Technology for Subgrade of Unballasted Track on Lan-Xin Passenger Dedicated Line

In Situ Monitoring Early-Age Properties of Concrete Retaining Wall by Fiber Bragg Grating Monitoring System
Nondestructive Testing and Static/Dynamic Loading Detection of a Diseased Fabricated Hollow Slab Bridge
Multi-Sensors Based Inclines Measuring System
FBG Earth Pressure Sensors Applied in Surrounding Rock Pressure of Tunnel
Monitoring Data Analysis of Piezometer in Xiao Langdi Sediment Tunnels
Experimental Research on Embankment Hidden Defects Monitoring Using Distributed Optical Fiber Sensor
The Low Strain Detection Test to Pile-Foundations of a Communication Hinge Engineering
An Application of Stored Procedures in a GPS-Based Slope Online Monitoring System for Open-Pit Mine
A Study on High-Rise Building Structure Selections Using Artificial Intelligence Methods
Testing Technology for Grouted Density and Empty Hole of Prestressed Corrugated Pipe Based on Ultrasonic Wave
Monitor and Analysis of the Foundation Pit Combination Support of Jinan West Railway Station Ground
Field Monitoring and Analysis of Reinforcement Concrete Slab
Concrete Damage Detection Based on Embedded Acoustic Emission Sensors
The Alignment Control of Large-Span Continuous Beam Bridge Cantilever Construction Method
Comparative Study of Model Test and Numerical Analysis on the Temperature Monitoring of Mass Concrete Raft Foundation
Selecting Single Optimal Excitation Position for Spatial Truss Structure's Damage Detection Based on Euclidean Distance
Construction Monitoring Technology Research on Large-Span V Structure Tied Arch Bridge
Space Rigid Frame Damage Identification Method Based on Modal Analysis
Thermal Gradient and Crack Monitoring of Concrete in Large Foundation during Construction
The Stability Research of Highway Bedded Rock Slope Based on the Stress Monitoring
The Study on Theoretical and Experimental Hysteresis of GLQW-1 Frictional Damper
Numerical Simulation of Bolt Looseness Monitoring Based on Impedance Method
A New Damage Alarm Index Based on Frequency Deviation for Structural Health Monitoring
Effect of Backing Materials on the Performance of Cement-Based Piezoelectric Ultrasonic Sensors
Analysis of Group Pile Foundation Environmental Factors Based on Bayes Estimation
Theoretical Calculation and Experimental Study on Sung Torque and Angle for the Injector Clamp Tightening Bolt of Engine
Analysis and Experimental Study of Concrete Strength Detection
Study on Seismic Response Control of Self-Anchored Suspension Bridge with TMD
Design and Implement of the Urban Bridge Cluster Monitoring Online Assessment System
Back Analysis on Deformation of Concrete Faced Rockfill Dam Based on Prototype Monitoring
Arch Dam Deformation Prediction Model Based on PSO-SVM
Experimental Study of Infrared Thermography for Detecting Internal Defect of Mortar Finishing Layer
Research on Dam Deformation Analysis Model Considering Multi-Factors
Research on Cable Force Testing Method of Cable-Stayed Bridge Model Test
Chapter 3: Structural Rehabilitation, Retrofitting and Strengthening
The Research of Several Problems that Merit Attention in Use of Rebar-Planting Anchorage Technique for Reforming and Strengthening Buildings
Analysis on Hysteretic Strain of Load-Carrying Strengthened RC Beams
A Study on the Quality Assessment System of Reinforced Concrete-Skein Reinforcement Method to Arch Bridges
A Study on the Quality Assessment System of External Prestressing Reinforcement Technology
Structural Analysis and Consolidation Strategy of the Historic Mediceo Aqueduct in Pisa (Italy)
A Study on the Quality Assessment System of Substructure Reinforcement Method
The Experimental Study on Steel Crane-Girder before and after Reinforcement
Test on Slip Coefficient of High-Strength Bolted Slip-Critical Connections after Fire
The Seismic Strengthening of a Middle School Teaching Building
Overview of Consolidation Method and Application for the Culvert under the Small or Medium-Sized Earth-Rock Dams
The Research of SFRC Column Reinforced by FRP
The Application of the Technology in Reinforced Frame Beam Complex Material
Collapse of the Historic City Walls of Pistoia (Italy): Causes and Possible Interventions
Temporary Preventive Seismic Reinforcements on Historic Churches: Numerical Modeling of San Frediano in Pisa
Behavior of Pre-Cracked Reinforced Concrete Beam Strengthened with Prestressed CFRP Plate
Study on Experiment of the Wire Rope Bottom Anchoring
Cracking Mechanism and Strengthen Method of Reinforced Concrete Hammerhead Piers
Study on Experiment of Terminal Fixture Connection of Steel Wire Rope
An Experimental Study on the Axial Compressive Behavior of Timber Columns Strengthened by FRP Sheets with Different Wrapping Methods
Analysis on Stiff Frame in Replacement of Closure Segment for Prestressed Concrete Cable-Stayed Bridges
Analysis of Technology and Economy for Steel Structure Reinforced with Carbon Fiber Sheets
Experimental Study on Reinforced Concrete Profiled Pipe Culvert
Rapid Treatment Technique of Diseases of the Rocking Axle Bearing of Railway Simply Supported Beam Bridge
Safety Analysis of Rural Buildings in Chaohu City Anhui Province
Experimental and Numerical Investigation on Reinforced Concrete Beam-Column Joints
Model Test of Valve-Pipe Grouting Technology to Soft Ground
Structural Optimization of Elevated Building
The Discussion about Improving the Bearing Capacity of Single Pile for Bored Pile in Sandy and Silt Layer
Study on Flexural Toughness of Steel Fiber Reinforced Concrete in Dam Strengthening Project
Virtual Reality Techniques for Ancient Building Protection and the Establishment of Database - Taking Foshan Zumiao as an Example
A Discussion about Construction Techniques to Improve Durability of Concrete Bridges in Alpine Regions
Concrete Bridge Structure Crack Analysis and Treatment Countermeasures
The Cause and Control of Cracks about the Fly Ash Foam Composite Light Wallboard
Experimental Study on External Anchorage Technique for Strengthening of the Existing Bridges
Study of Flexural Property of Prestressed Carbonfiber-Reinforced Plastics (CFRP) Reinforced Concrete Beams
Experimental Investigations of Masonry Columns Strengthened by SGFRP under Eccentric Loads
Numerical Simulation of Masonry Walls Retrofitted by Prefabricated Reinforced Concrete Panels
Study on Renovation and Appraiser of Beijing Hutong Buildings
Site-Test Research on Shearing Capacity of Bonding Interface between New and Old Concrete
Application of Buckling-Restrained Braces in Prefabricated Reinforced Concrete Frame
Seismic Performance of RC Short Columns Strengthened with BFRP
An Experimental Study on Mortar-Filled Buckling-Restrained Mechanism
Testing Study on the Bending Capacity of Stone Beam Reinforced with CFRP
Preferred Selection on Strengthening Schemes of Arch Bridge Based on Fuzzy Analytic Hierarchy Method
Numerical Investigation on Shear Failure of Concrete Beam Strengthened by Bonded Steel Plate
Seismic Damage Causes and Strengthening Methods of Museum Free-Standing Cultural Relics
Aseismic Constitution Problems and Strengthening Methods of Chinese Ancient Wooden Buildings
Chapter 4: Reliability and Durability of Structures
Research of Non-Probabilistic Reliability of Soil Structure of High-Grade Highway Based on Interval Analysis
The Application of MATLAB-Based Monte Carlo Method in Hydraulic Structures Reliability
Concentration Distribution of Chloride Ion in Cracked Concrete
Performance Evaluation of Existing Reinforced Concrete Bridge Based on Reliability Analysis
Non-Probabilistic Reliability of RC Bridge Retrofitted in Flexure with Externally Bonded Steel Plates
Erosion-Resisting Characteristics of Concrete under Freeze-Thaw Action
In-Plane Creep Stability Design of Concrete Filled Steel Tubular Arches Using Inverse Reliability Method
Influence of Water Content on Dynamic Elastic Modulus of Concrete
Current Situation of Researches on Durability of R.C. Structures
Research on System Reliability of Plane Steel Truss
Research on Carbonation Life Prediction Model of Recycled Concrete Structures
Experimental Study on Strain Performance of Tensile Reinforcement under Fatigue Loads
Study on Box-Jenkins Method of Prediction of Chloride Concentration of Marine Concrete Structures
Experimental Research on Residual Strength of Concrete under Fatigue Loading and Corrosion of Magnesium Nitrate
Pipeline Support under the Loads of Comparative Analysis
Structural Reliability Analysis with Multi-Failure Models Using High-Dimensional Model Representation
Research on Structural Present State and Damage Reasons of Ancient Tibetan Buildings
Simply Supported Slab Bridge Damage Identification Based on Curvature Mode Method
Resaerch on Bending Behavior of Corroded PC Beams
Safety Assessment Method Based on Response Spectrum Analysis of Building Structures to Blasting Vibration
Probability Function Estimation of Rock Random Variables Using Chebyshev Orthogonal Polynomial
Study on System Reliability of Gravity Dam
Cause Analysis and Countermeasures of Early-Age Cracks on Cast-in-Place Slab with Ready Mixed Concrete
Effect of Curing Temperature on the Properties of Concrete at Early Age
The Research of Predicting the Carbonation Depth of Concrete with Time-Series Analysis
Comparison of Two Approaches in Reliability Analysis for the Network of Trentinos Bridge Management System
Research on the Impact Factors of Reliability and Comparison in the Design of Building Structures
New Alternative Methods for Design of Joints and Elements of Timber Structures
Study on Shear Resistance and Durability of CFRP Reinforced Concrete Beams
48''900lb Full-Welded Ball Valve Ultimate Bearing Capacity Optimal Design
Study on Reliability of Bracing Structure for Foundation Pit by Excel Optimization Algorithm