
Textures of Materials
Description
The proceedings are broadly divided into six sections; the first being a collection of keynote lectures, followed by papers classified under Deformation, Deformation and Annealing, Techniques, Annealing and Materials.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The development of specific textures in materials occurs either naturally or by synthesis and processing using various methods. The presence of textures in materials manifests itself in the form of anisotropic properties; the understanding of which is indispensable to precise engineering design. In addition to conventional applications in structural materials, texture control has come to be practised in the form of functional materials. This collection is an edited version of papers presented at the sixteenth international conference on the textures of materials (ICOTOM 16), held at the Indian Institute of Technology in Mumbai, India on December 12-17th, 2011.
The proceedings are broadly divided into six sections; the first being a collection of keynote lectures, followed by papers classified under Deformation, Deformation and Annealing, Techniques, Annealing and Materials.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
More details
Other editions
Additional editions


Content
<i>In-Situ </i>Texture Measurements by Synchrotron Radiation of TRIP Steel during an Austempering Treatment</li><li>Quantifying Damage Accumulation Using State-of-the-Art FFT Method</li><li>Generalized Pole Figures and Stored Energy Distribution Function Obtained by X-Ray Diffraction</li><li>4.4 Recent Advances</li><li>Study of Deformation Twinning and Planar Slip in a TWIP Steel by Electron Channeling Contrast Imaging in a SEM</li><li>EBSD-Based Crystallographic Study on a Ni-Mn-Ga Alloy with Incommensurate 7M Structure</li><li>High Resolution Orientation Distribution Function</li><li>Virtual 3D Microstructures with Specified Characteristics of State Variable Distributions</li><li>Common Region between Euler Subspace and Rodrigues Fundamental Zone for a Cubic Crystal and Orthotropy Sample Symmetry</li><li>4.5 EBSD</li><li>Angular Precision of Automated Electron Backscatter Diffraction Measurements</li><li>Intelligent Microscopy for EBSD Applications</li><li>Study of the True Nature of Microband Boundaries in Aluminum with 3D EBSD</li><li>Local Strain Calculations Using Electron Backscattered Diffraction (EBSD) Measurements and Digital Image Processing</li><li>Improving the Reliability of EBSD-Based Texture Analysis by a New Large Area Mapping Technique</li><li>Characterization of Coatings by SEM Based Microdiffraction</li><li>Texture and Microstructure Evolution in Friction Stir Welded Cu-Al Sheets Characterized by EBSD</li><li>Metallographic Preparation for Electron Backscattered Diffraction</li><li>Chapter 5: Annealing</li><li>5.1 Grain Coarsening</li><li>Abnormal Growth Mechanisms of Goss Grains in Grain-Oriented Electrical Steels</li><li>The Effect of Cold Rolling Direction on the Secondary Recrystallization in Fe-3%Si Steel</li><li>Texture and Microstructure Evolution during Box Annealing of a Non-Oriented-Grain Electrical Steel</li><li>Modeling of the Particles Pinning Effect on Grain Growth</li><li>5.2 Recrystallization</li><li>Experimental Investigation of Texture Gradients in Aluminium/Copper Plates Bonded through Explosive Welding Process</li><li>Facilitated Recrystalization of the Hard-to-Recrystalize Structure in 16% Cr Steel Sheets by one-Pass ECAP Prior to Cold Rolling</li><li>Recrystallization Textures in Aluminum Alloys: Experimental Study and Modelling</li><li>Cellular Automata Simulation of Textural Evolution during Primary Static Recrystallization of IF Steel</li><li>Influence of Nb-Ti Composition on Recrystallization of Ferritic Stainless Steel</li><li>Recrystallization Behavior Immediately after Hot-Rolling in Ferrite Region in Ultra Low Carbon Sheet Steels</li><li>Progress of Recrystallisation in Cold Rolled Austenitic Stainless Steel during Cyclic Thermal Process</li><li>5.3 Recovery & Recrystallization</li><li>Study on Recrystallization Behavior of Nb-1Zr-0.1C Alloy</li><li>Grain Boundary Migration and Grain Growth Texture Evolution in Zn in a High Magnetic Field</li><li>Vertex Dynamics Simulations of Orientation Dependent Recovery in Deformed Aluminium Single Crystals</li><li>An EBSD Study of Texture Variation along Pilger Reduced Titanium Alloy Tubes</li><li>Texture Evolution during Recrystallisation of Cold Rolled TWIP Steel</li><li>Influence of Rare Earth Addition on Texture Development during Static Recrystallization and Mechanical Behaviour of Magnesium Alloy Sheets</li><li>Compromising Effect on Development of Recrystallization Texture in Aluminium Sheet - A 2D MC Type Simulation -</li><li>Study of the Microstructure, Texture and Tensile Properties in as-Extruded AZ91 and ZM21 Magnesium Alloys</li><li>Modelling Static Recrystallisation Textures Using a Coupled Crystal Plasticity-Phase Field Technique</li><li>Study of Micro-Texture during Recovery and Recrystallisation in Folded BCC and FCC Sheet Samples</li><li>Chapter 6: Materials</li><li>6.1 Corrosion/Oxidation</li><li>Combined EBSD and AFM Study of the Corrosion Behaviour of ETP-Cu</li><li>Study on Sensitization Susceptibility and Texture of Cold Rolled AISI 304LN Stainless Steel</li><li>Non-Uniform Strain Hardening of Crystallites within Different Regions of Texture Maxima: Evidences and Mechanisms</li><li>IGSCC of Non-Sensitised Austenitic Stainless Steels in BWR Environment - Effect of Deformation Mode on Grain Boundary Susceptibility</li><li>Electrochemical Characterization of Low Temperature Thermal Aging Embrittlement of Stainless Steel 304L Weld</li><li>End Grain Corrosion: Establishing Microstructural Causes and Preventive Steps</li><li>6.2 Interfaces</li><li>Statistical Analysis of Grain Boundaries in the Space of Macroscopic Boundary Parameters</li><li>Importance of Microscale Texture and Grain Boundary Connectivity to Percolation-Dependent Bulk Properties in Polycrystalline Materials</li><li>Evolution of Grain Boundary Texture in Zirconium Alloys</li><li>Origin and Role of ?3 Boundaries during Thermo-Mechanical Processing of a Ti-Modified Austenitic Stainless Steel</li><li>6.3 Electrical Steel</li><li>Elemental Distribution Characteristics Across ?-TiAl:TiAlV Diffusion Bond Interface</li><li>Recrystallization Textures of Cross-Rolled 3.3% Si Electrical Steel and 99.99% Copper Sheets</li><li>Correlation between Texture at Primary Recrystallized State and Magnetic Properties in Grain Oriented Electrical Steels</li><li>Effect of Mn on <100> Texture Evolution in Fe-Si-Mn Alloys</li><li>Modeling the Magnetic Properties of Non-Oriented Electrical Steels Based on Microstructural Parameters</li><li>Grrain Orientations and their Influence on Precipitation in Hot Compressed Columnar Grains in Electrical Steel</li><li>Strong Goss Texture in Recrystallized Fe<sub>81</sub>Ga<sub>19</sub> Sheet</li><li>Effect of Cold Rolling Reduction Rate on Secondary Recrystallized Texture in 3%Si-Fe</li><li>Effect of Uni-Axial Tensile Deformation on Microstructure and Magnetic Properties of 3.2% Si Grain Oriented Electrical Steel</li><li>Orientation Evolutions During Hot Rolling of Electrical Steel Containing Initial Columnar Grains</li><li>Texture Evolution during Asymmetrical Warm Rolling and Subsequent Annealing of Electrical Steel</li><li>Through-Thickness Shear Strain in Silicon Steel under Asymmetric Rolling</li><li>6.4 Steel</li><li>Effect of Grain Size and Meso-Texture on the Impact Toughness of Ti-Microalloyed Steel</li><li>Crystallographic Texture as a Factor Enabling Ductile Fracture Arrest in High Strength Pipeline Steel</li><li>Microstructure and Texture Evolution in Interstitial-Free (IF) Steel Processed by Multi-Axial Forging</li><li>Texture Evolution during Cold Rolling and Annealing in Dual Phase Steels</li><li>Strain Localizations in Ultra Low Carbon Steel</li><li>Improvement of Crystallographic Texture of High Strength Interstitial Free Steels by the Control of Steel Chemistry and Coiling Temperature</li><li>Recrystallization Texture of Ferrite Steels: Beyond the ?-Fibre</li><li>Annealing Behaviour of Ferritic HT-9 Steel</li><li>Texture Formation in High Strength Low Alloy Steel Reheated with Ultrafast Heating Rates</li><li>Microstructure Evolution in Deformed Ultrahigh Carbon Low Alloy (Wootz) Steel</li><li>Study of Texture in Ultra Fine Grained Dual Phase Steel Sheets</li><li>Texture Development in Ferritic Steels during High Temperature Uniaxial Compression Deformation</li><li>Orientation Relationships of Coarse Pearlite Islands Formed in Tundish Well Clogging Deposits</li><li>Study of Recrystallization and Phase Transformation in a Cold-Rolled Dual-Phase Steel: Influence of Temperature and Heating Rate during First Annealing Stages</li><li>6.5 Ti & Zr</li><li>Effects of Grain Size and Texture on the Biocompatibility of Commercially Pure Titanium</li><li>Deformation Behaviour of Titanium in Torsion</li><li>Texture and Microstructure Development during Swaging and Annealing Process of Fabrication of Zircaloy-4 Rod Products</li><li>Influence of Temperature upon the Texture Evolution and Mechanical Behaviour of Zircaloy-4</li><li>Plastic Deformation of Textured Zircaloy 2</li><li>Texture Formation in ?-Zr of Zr-1%Nb Alloy under Radial Forging</li><li>6.6 Phase Transformation</li><li>Current Approaches for Reconstructing the Parent Microtexture from that Inherited by Phase Transformation</li><li>Variant Selection and Texture in an AISI 301LN Stainless Steel</li><li>
<i>In Situ</i> Observation on the Influence of ss Grain Growth on Texture Evolution during Phase Transformation in Ti-6A-4V</li><li>Nanocrystallization and Texture Transformation in the Surface Layer of Copper Induced by Surface Mechanical Attrition</li><li>Determination of the Orientation Relation from Variants Inherited by Phase Transformation</li><li>Determination of Crystallographic Elements (Dislocation and Surface Plane) from Automated TEM Orientation Determination</li><li>Evolution of Hot Rolling and Phase Transformation Textures in an ?'' (Orthorhombic) Phase in Ti-Nb Alloys</li><li>Evolution of Texture during Directional Solidification of Giant Magnetostrictive Tb<sub>0.3</sub>Dy<sub>0.7</sub>Fe<sub>1.95</sub> Alloy</li><li>Restitution of Prior-Austenite Grain Orientation by Microtexture Analysis of Tempered Martensite Structure in 9Cr-1Mo Ferritic Steel</li><li>6.7 Shape Memory</li><li>Textural Evolution Evaluated by EBSD and XRD after Thermal Treatment in Ni-Ti Shape Memory Alloy</li><li>Microstructural Irreversibilities under Thermal Cycling in Ni-Ti-Fe Shape Memory Alloys</li><li>Evolution of Texture and Microstructure during Cold Rolling and Annealing of Fe-14Mn-6Si-9Cr-5Ni Shape Memory Alloy</li><li>Deformation Induced Phase Seperation of Ni<sub>45</sub>Co<sub>5</sub> Mn<sub>36.7</sub>In<sub>13.3</sub> Alloy at High Temperature</li><li>Variants of Texture Formation by Rolling of Ti-Ni Single Crystals with Shape Memory Properties</li><li>TEM Studies on the Microstructural Changes during Thermo-Mechanical Cycling of NiTi Shape Memory Alloy Wire</li><li>Texture Formation in Thin Tapes from Ni-Based Ternary Alloys with Cr, W, Mo and V</li><li>6.8 Nano Structured Materials</li><li>Texture of Electrodeposited Nanocrystalline Ni-Fe with Banded Structure</li><li>An EBSD Study of Gallium Arsenide Nanopillars</li><li>Investigation on Texture Evolution in Plastic Deformation Layer of SMAT Iron</li><li>Nanometer Scale Microstructure and Microtexture of Biological Materials Revealed by High Spatial Resolution (15 to 5 kV) EBSD</li><li>Influence of Additives on Texture Development of Submicro- and Nanocrystalline Nickel</li><li>6.9 Microstructural Engineering</li><li>A Multi-Scale Modeling Approach to Simulate Intergranular Crack Propagation in Textured Polycrystalline Materials</li><li>Development of Continuously Cooled High Strength Bainitic Steel through Microstructural Engineering at Tata Steel</li><li>Texture Evolution along the Layer Thickness in a Fe-3%Si Steel under Electropulsing Treatment</li><li>Effect of Environment on the Surface Modification by Pulse Laser Irradiation of Al-Si/SiC<sub>P</sub> MMCs</li><li>Favorable Effect of Ho Addition on the Microstructure and Magnetostriction of Textured Tb<sub>0.3</sub>Dy<sub>0.7</sub>Fe<sub>1.95</sub></li><li>Mesoscopic EBSD Analysis and Mesomechanical Behavior of Ridging or Roping in AA6XXX Alloys</li><li>Microstructural Analysis of Type 304 Metal Sleeve</li><li>Process Parameter Impact on Microstructure of Laser Clad Inconel-Chromium Carbide Layers</li><li>Structure-Property Correlations in Cathodic Arc Deposited TiAlN Coatings</li><li>The Redistribution and Alignment of Crystalline Flakes in a Bulk Metallic Glass Composite during Thermoplastic Forming</li><li>Ultrasonic Processing and Microstructural Analysis of AZ91 Magnesium Alloy</li><li>Effect of Modes of Rolling on Mechanical Properties, Texture and Ballistic Performance of Al-7017 Alloy</li><li>Effect of Modes of Rolling on Evolution of Texture and Yield Locus Anisotropy in a Multifunctional Ti-31Ta-12Nb-2V-8Zr-0.22O Alloy</li><li>Effect of Roll Diameter and Modes of Rolling on Evolution of Texture in High Purity Aluminum</li><li>A Cross-Sectional TEM Study of Abrasive Water Jet Cut Surface</li><li>6.10 Non-Metallic Materials</li><li>Ferroelastic Domains and Anisotropy in Lead Free Piezoelectrics</li><li>Epitaxial Growth of ?-Fe<sub>2</sub>O<sub>3</sub> Thin Films on <i>c</i>-Plane Sapphire Substrate by Hydrothermal Method</li><li>A Stochastic Optimization for the Optimal Texture of Ferroelectrics for Piezoelectric Applications</li><li>Textured Multiferroics: 2-D Diffraction and Properties Prediction</li><li>Microstructural Characterization of Ferroelectric Bismuth Ferrite (BiFeO<sub>3</sub>) Ceramic by Electron Backscattered Diffraction</li><li>Study of Microstructures in Single Crystalline Chemical Vapor Deposited Diamond Thin Films</li></ul>