Engineering Solutions and Technologies in Manufacturing

Foreword, Committees and Acknowledgements
Chapter 1: Advanced Machining Technologies and Surface Engineering
Research Regarding the Relationship of the Axial Cutting Force at Drilling of the Stainless Steel X15CrNiSi20-12
Analysis of the Relationship of the Cutting Tool Wear at Drilling of the Stainless Steel X15CrNiSi20-12
The Method of Design and Manufacturing of the Gear Hobbing Cutter with Bulges
Study of Residual Stresses Distribution Generated from Milling of Magnesium Alloy Parts
Influence of Cutting Parameters on Surface Morphology of Austenitic Stainless Steel after Turning
Side Mill Tool Profiling for Generation of Helical Surfaces Determined by Reverse Engineering
Equipment for the Study of Machinability by Drilling under Constant Force Feed
Effect of Minimum Quantity Cooling Lubrication (MQCL) on Chip Morphology and Surface Roughness in Turning Low Carbon Steels
Influence of Minimum Quantity Cooling Lubrication (MQCL) on Chip Formation Zone Factors and Shearing Force in Turning AISI 1045 Steel
Contributions to Multi-Criteria Optimization of Cutting Processing
Experimental Research of Effective Cutting Speed Influence on Surface Roughness in Ball End Milling of C45 Material with Hardness 34 HRC
Aspects Concerning the Possibility to Measure the Radial Deflection of a Work Piece Obtained into a Turning Process
Estimation of Possibilities of the Productivity Rise at Turning of Hard-Processing Materials
Experimental Study of Vibrations in Face Milling Cutting
Determination of Stressed-Deformed State of Fine Disc Tools with Inner Cutting Section under Conditions of their Pre-Stressing
Dynamic Behavior of Long Turned Workpieces
Machinability Aspects Investigations in Hard Milling of AISI W1 Hardened Tool Steel
Machinability by Milling of Gray Cast Iron
A Review of the Main Modeling Methods for Ball Nose End Milling Processes
Determination of Optimal Working Parameters of the Combined Burnishing - Turning Process by Applying the Method of Response Surfaces
Residual Stresses Generated by the Combined Burnishing - Cutting Process in the Worked Parts
Chapter 2: Forming Technologies
On the Kinematic Structure of Cold Forming Machine-Tools with Several Main Effector Elements
Researches on the Wear of the Stamped Punches Heat Treated Differently Using the Method of Deviation from Circularity
Design Methodology of Laminating Tools
Numerical Simulation of Plastic Deformation Process of the Glass Mold Parts
Application of the Taguchi Optimization Method in Order to Improve the Quality of the Conical Mini-Parts Obtained by Forming Process
Experimental Determination of Force and Deformation Stress in Nanostructuring Aluminum by Multiaxial Forging Method
Digital Scanning Method for Thickness Analysis of Hollow Parts Manufactured by Incremental Forming on a CNC Lathe
Influence of Processing Parameters on the Quality of the Superficial Layer after Processing Surfaces by Plastic Deformation
Software Tool Used for Simulation of Metal Spinning Process for Complex Rotational Parts
Analysis of Geometry Deviations in Case of Conical Mini-Parts Obtained by Forming Process from Copper-Zinc Alloy (CuZn37) Sheets
A Study of Single Point Incremental Forming by Finite Element Analysis
The Influence of Dimensional-Type Mathematical Model for Cylindrical Deep Drawing on the Distribution of Extreme Unitary Stresses
Researches Regarding the Usage of Titanium Alloys in Cranial Implants
Contributions Regarding Incremental Forming Process of Bimetallic Sheets
An Optimized Methodology for Process Quality Analysis and Monitoring Activities in Case of Sheet Metal Bearing Cages Stamping
Study Concerning the Maximal Depth of a Cylindrical Part Made from Tailor Welded Blanks
Design and Implementation of a Device for Nanostructuring of Metallic Materials by Multiaxial Forging Method
Chapter 3: Electrophysical, Welding and Assembly Technologies in Manufacturing
Electrochemical Discharge Grinding of Chrome Alloyed Steels in Inorganic Solutions
Artificial Intelligence Model for the Prediction of Cut Quality in Abrasive Water Jet Cutting
Study on Process Parameters in Fiber Laser Micro-Cutting Technology
Optimization of Laser Cut Quality Characteristics Considering Material Removal Rate Based on Pareto Concept
Experimental Investigation on AECM of High Speed Steel
A Simulation of Spot Welding Process
Finite Element Analysis to Predict the Mechanical Behavior of Lattice Structures Made by Selective Laser Melting Technology
Finite Element Analysis to Improve the Accuracy of Parts Made by Stainless Steel 316L Material Using Selective Laser Melting Technology
Experimental Study on Unsynchronized Ultrasonic Assistance of Electro Discharge Machining Process
Optimization of Reactive Sputtering Technology for Hard Coatings Deposition
Shear Resistance of Joints Spot Cold Pressure Welding
Study on Identification and Classification of Causes which Generate Welds Defects
Studies on the Corrosion Behavior of Deposits Carried out by Thermal Spraying in Electric ARC - Thermal Activated
Experimental Study of the Laser Cutting Process on 1C45 - 3 mm Steel
Experimental Studies on Adherence Resistance of Thermally Sprayed Metallic Coatings
Aspects Regarding the Surface Quality of the Laser Engraved Glass
Some Researches Regarding the Durability of the Metal Carbide Cutting Inserts Coated with Ti Thin Layers
Modelling and Optimization Study on Hardness of Ni-Fe Alloy Thin Films through Electroplating Process
Influence of Some Factors on Surface Roughness Parameters at Electrical Discharge Machining
Influence of the Spraying Distance and Jet Temperature on the Porosity and Adhesion of the Ti Depositions, Obtained by Thermal Spraying in Electric Arc - Thermal Activated
Determining the Coefficients of Fusion and of Weld Deposition at Mechanized Mag-C Welding with Solid Wire and Cored Wires
Experimental Investigations on Aluminium Ultrasonic Welding Parameters
Study on Processing of Titanium Aluminide Alloy Using Electrical Discharge Machining
Nonconventional Machining Based on Electrical Charged Particles Motion in Liquid
Investigation of the Electro-Discharge Open-Hole Machining on the Structural Behavior of Carbon Fiber Reinforced Polymers
Analysis of Residual Stresses in Steel Welded Parts Using Ultrasounds
Experimental Research on Ultrasonically Welded Copper
ECDM Drilling Process Analysis via Taguchi Method
Geometric Deformations of Welded Metallic Structures
Some Methods and Techniques for Optimizing Dimensional Processing Using Complex, Electrical and Electrochemical Erosion
Using Delmia V5 for Human Activity Improvement in an Assembly Line Production
Production Orders Sequencing in Mixed-Model Assembly Lines
Planning, Monitoring and Controlling Assembling Activities for Oil Well Drilling Rigs
Active Screen Plasma Nitriding Efficiency and Ecology
Chapter 4: Advanced Materials
Experimental Studies Regarding the Mechanical Behaviour of Silicon-Coated and Uncoated P.A. 6.6 Fabrics
Stress-Strain Characteristics of Polyester Composites with Singlewall, Multiwall and Functionalized Carbon Nanotubes
NiTi Shape Memory Alloy Active Element Behavior in Long Time Solicitation Conditions
Implementation of Shape Memory Alloys as Active Elements in Injuries Recuperative Equipment
Biocomposites - State of the Art
Investigations Regarding the Influence of Surface Topography on Emissive Properties of Material
Gamma Titanium Aluminides Behavior at High Temperature Static Short-Term Stress
Improvement of Properties of Aluminum Bronze CuAl7Mn3 by Heat Treatments
Alloys with Acoustic Properties
Tribological Study in Case of Polymeric Composite Materials Reinforced with Unidirectional Carbon Fibers Having Stratified Structure
Experimental Determining of Mechanical and Elastic Characteristics for the Material Used in the Manufacturing of Cardan Crosses
Theoretical and Experimental Research on Mechanical Behavior of Layered Composites Laminates
Profilometric Evaluation of the Worn Surfaces under Dry Reciprocating Wear Conditions of a Composite Material to Repair Brass Made Parts
Chapter 5: Researching and Designing of Manufacturing Equipment, Machine Parts and Mechanisms
Pneumatic Muscle Actuated Parallel Asymmetric Gripper System with a Mobile and a Fixed Jaw
Procedure against Overturning of the Road-Rail Machines Load Distributions on Wheels
Combined Constructive Solutions for Increasing Cast C-Frame Stiffness of Mechanical Presses
Functional Assessments of Dynamics of the Vibratory-Driven Equipments with Belt Transmissions
Dynamic Diagnosis of Elastic Coupling Transmissions of Technological Equipments Based on Joint Time-Frequency Evaluations
New Algorithm for the Gauges Design
Experimental Research Regarding the Influence of Hydraulic Resistances on the Hydrostatic Guideways Stiffness
Designing Multispeed Gear Pitch Curves
Braking Solution for a Hydraulically Driven Linear Pallet Changer Mechanism
Considerations Regarding the Functionality of Chuck Collets in Mechanical Systems
Influence of Resistant Forces on the Positioning Precision of Kinematic Feed Chains Used on CNC Machine Tools
Geometric Aspects and Particularities in the Functioning of a Reductor with Balls
Expanding Research in the Field of Asymmetric Gear Design and Manufacturing
Looking for a Mathematical Solution for a Self-Centering Device
Experimental Research Regarding Static Rigidity in Axial Direction of "Narrow" Modules from Modular Fixtures Structure
Study of Water-Oil Emulsion Stability
The Tightening Accuracy of Workpieces in the Multiple Clamping Devices
Research on the Main Parameters of the Turbo-Blower Axes TiN Covering Process
Contributions to Soil Resistance Mapping for Increasing Parts Durability for Agricultural Machinery
Influence of Guideways Misalignment on the Positioning Precision of Kinematic Feed Chains Used on CNC Machine Tools
Experimental Research Regarding the Influence of Pocket Pressure Values on the Stiffness of Hydrostatic Guideways
Research Regarding Improvement of Dynamic Behaviour for High-Ratio Planetary Gears
Modelling and Simulation with Fine Element Method to the Processing of Sheet Metal Finning
Innovative Solutions for a Shoe Sole Cleaner
Measuring the Impact Forces within the Cleaning Nozzles Sewage System
Device for Wire Electrical Discharge Machining
Constructive and Functional Modelling of a Pneumatic Muscle Actuated Symmetric Gripper System with Two Mobile Jaws
Photogrammetric Scanning and Applications in Medicine
Sound Reasearch in Precessional Transmission
Analysis of a Composite Blade Design for 10 kW Wind Turbine Using a Finite Element Model
Research on Optimization of a Chain of Dimensions that Determine the Parallelism between Two Axes
Approach of a Particle Statics Problem by Using the Bond-Graph Modeling Method
Bearing Scuffing Detection and Condition Monitoring Using Virtual Instrumentation
On-Line Running Tests for Validating the Numerical Simulations of the Vertical Dynamic Behavior in Railway Vehicles
The Influence of Changing the Parameters of Electrical Components Implementing the Active Reduction of Vibration
Comparative Study of Blade Shape Design of Centrifugal Fan Impeller
Functional Diagram for Modeling the Electromagnetic Ball Valve with Cylindrical Seat
Linear Motion Actuator Using Magnetorheological Fluid Properties
Analysis of the Collapse Behaviour Regarding TWB Crash-Boxes in Conjunction with the Construction Technique
Simulation and Mathematical Modeling on Bending of Pipe Subjected to Internal Pressure
The Method for Determining the Vibration-Damping Elements for the Mechanical System to Obtain the Desired Amplitude Value
The Effect of Tooth Wear on the Dynamic Transmission Error of Helical Gears with Smaller Number of Pinion Teeth
High Speed Impact Virtual Studies Made on Projectiles Models for Designing Shields Based on Innovative Materials
Dynamical Charactersitics of the Discrete - Continuous Mechatronic System Obtained by Means of Exact and Approximate Methods
Aspects of Seismic Hazards Caused by the Mining and its Sequelae
Solutions for Measuring the Position Deviation for Internal Keyways - Case Study
Simulator for a Natural Gas Storage Realised in Depleted Deposit
Researches Regarding the Influence of Temperature on a Weigh-in-Motion Hydraulic System
Noncircular Gears Designed by Geometric Hypothesis
Method for Redesign of District Heating Networks within Transition from the 2nd to the 3rd Generation
Using Parameter Deviation Function for Estimating the Calibration Life of Micrometers
Position Control System of a Trunk in an Upward Airflow
Experimental Study Regarding the Computation of the Effective Power of a Spark-Ignition
Comparison and Evaluation of Information Security Models for Access Control
Chapter 6: CAD/CAM/CAE Technologies in Design and Manufacturing
On the Right Parameterization of 3D Models - Case Study
The Pinion Cutter for Profiled Holes - Graphical Method in CATIA
Experimental Framework for FEA Analyses of 3D Geometry of a Connecting Rod
Smart Engineering Design of a V10 Engine Using Digital Prototyping Technologies
Impact Analysis of an Oxygen Mask Locking Panel of Aircraft Using Finite Element Modelling
Parametric Modeling CAD-CAM of the Ankle and Pathological Related Situations
Cad Development - User Custom Drafting Extensions
The New Approach to Design Features Identification
The Practical Approach to Freeform Shape Elements Reverse Engineering
Consideration about Elastic Couplings Modeled in CATIA
Computer Aided Analysis of Composite Structural Elements
Virtual and Experimental Studies about Human Walking - Virtual Lower Leg Environment - Innovative Design of Tibia Nail
Software for Computing Lenticular Compensators (Bellows)
The Behavior of the Virtual Human Head-Neck System during the Main Movements
Methods for Checking the Symmetry of the Formula One Car Nose
Study and Improvement of Road Tunnels Fire Behavior Using Pyrosim
Replica Fabrication of a Greek Paleontological Find Utilising Laser Scanning and Fused Deposition Modeling
Chapter 7: Flexible Manufacturing, Automation and Robotics in Technological Processes
On the Generation of Complex Trajectories Using a Robotic System with Six Degrees of Freedom
Case Study of Manufacturing Information Acquisition System (MIAS) in Automated Continuous Production System
Optimization through Simulation of Poly-Articulated Mechanical Systems Used in Medical Robotics
Contributions to the Design of the Load Station Concept Used at the Flexible Manufacturing Cell
Inverse Kinematics for a 7 DOF Robotic Arm Using the Redundancy Circle and ANFIS Models
Robotic Elephant's Trunk Arm with Flexible Spatial Positioning
Structural Optimization of an Automatic Pallet Changer Mechanism Using the Tree-Graph Method
Influence of Dimensional Deviations on the Positioning Accuracy of Robots with Delta 3 DOF Parallel Structure
About the Accuracy of Positioning of a Linear Robot Equipped with a High Resolution Optical System
Robot Vision Application for Overlapped Work Pieces
Model of the e-Manufacturing Environment as the Multi-Agent System
Smart Adaptive CNC Machining - State of the Art
Procedure of System Control Using Distributed Parameters through Discrete Finitisation
Pareto Optimality of Production Schedules in the Stage of Populations Selection of the MOIA Immune Algorithm
The Description of a Distributed Parameter Process through a Finite Discrete Dimensional System
Chapter 8: Production Management and Product Design
Elements of Quality Analysis in Metallic Materials Production
Determining the Duration of R&D Processes through Monte Carlo Simulation
Quality Management in Projects - Quality Planning
On Romanian SMEs Development Using Concentrated Energies Technologies Based on Updated Greiner's Model
Patent Analysis by Business Intelligence Tools and Strategic Growth Opportunities
Contributions Regarding the Utilization of Neural Networks in SME's Management
Using Functional Requirements Formulation in Fault Tree Analysis Construction - A Way to Improve Product's Design
Results of Technology Foresight in the Surface Engineering Area
Improving Organizational Performance through the Use of the EFQM Excellence Model
Optimizing Decisional Process by Applying the Multi-Criteria Analysis
Validating Algorithms and Methods Destined for Information System Design Meant for the Business Environment Using Simulated Companies
Solutions in Limit Deviations for Optimum Dimensional Structures of Technological Processes of Machining
Noise and Vibration Pollution Reduction to a Mineral Aggregates Station through Rim Optimization in Order to Align at EU Legislation
Risks Assessment Applied to Manufacturing Processes - Case Study
Enhance Competitiveness through Total Quality Management and its Components
Contributions to the Normalization of the Control Systems Used for Quality Control of the Interior Body Parts Used in Automotive Industry
Transient States of Cyclic Production Planning and Control
The Analysis of Performances of an Assembly Line in Synchronous Supply Managed with Kanban and Conwip Methods
Influence of Production Flow Management Methods on an Assembly Line Supplied on Stock
Evaluating the Risk of Failure on Injection Pump Using Fuzzy FMEA Method
Comparative Analysis of Awareness and Knowledge of APQP Requirements in Polish and Romanian Automotive Industry
Quality Planning of Parts Machine Production Based on Housing of Cylinder Head Milling Machines
Lean Manufacturing Benefits in a Pharmaceutical Production Plant
Holistic Product Analysis within Technological Changes, as Instrument for Product Sustainability Improvement
Implementation of the New Standard in the Field of Geometrical Product Specifications in Republic of Bulgaria
Methods for Selection of Measuring Instruments
Neutrosophic Modeling of Investment Architectures
Sustainable Development Achievements in a Database System
Creative Design for Skin and Shape Using Advanced CAD Systems
Conceptual Product Design Inspired from Nature
PLM and Eco-Design of Electronic Products According with Circular Economy Principles
Some Aspects about Innovation Strategy of Firms in the Industry
Analysis, Modeling and Simulation of Complex Regional Clusters Activities, Using Arena Simulation Software
Innovation as a Key Factor for Entrepreneurial Activity
An Evaluation of the Ergonomics of the QWERTY Keyboards
Evaluation of Personality Traits for a Successful Career of Engineers
Practical Approaches in the Design of Everyday Objects for the Elderly
Overview on Equipment Development Ontology
Chapter 9: Innovative Technologies in Engineering Education
Models of the Equipment of Drilling and Extraction Used in the Teaching Activity
Evaluating the Process of Introducing Project-Based Learning in the Curriculum of Engineering Students
Romanian-French Collaboration for Master and Doctoral Studies in "Materials Engineering"
Basics of the Graphical Representation of Parts - Views and Sectional Views