Microalloying in Steels
Published on 4. June 1998
Book
Hardback
604 pages
978-0-87849-816-1 (ISBN)
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The technology of microalloying is now, at the end of the 20th century, widely accepted due to the attractive balance of properties which is achievable with the correct control of the interaction between steel chemistry and processing parameters. Microalloying is applied to a broad spectrum of products and has two main goals: to improve the mechanical properties and to save costs.
The technology of microalloying is now, at the end of the 20th century, widely accepted due to the attractive balance of properties which is achievable with the correct control of the interaction between steel chemistry and processing parameters. Microalloying is applied to a broad spectrum of products and has two main goals: to improve the mechanical properties and to save costs.
More details
Series
Language
English
Place of publication
Zurich
Switzerland
Target group
College/higher education
Professional and scholarly
Dimensions
Height: 24.5 cm
Width: 17 cm
Thickness: 30 mm
Weight
1390 gr
ISBN-13
978-0-87849-816-1 (9780878498161)
DOI
10.4028/www.scientific.net/MSF.284-286
Schweitzer Classification
Other editions
Additional editions
Trans Tech Publications Ltd | J.M. Rodriguez-Ibabe | I. Gutiérrez
Microalloying in Steels
E-Book
06/1998
Trans Tech Publications Ltd
€211.86
Available for download
J.M. Rodriguez-Ibabe | I. Guti?rrez | B. L?pez
Microalloying in Steels
Software
06/1998
Trans Tech Publications Ltd
€386.15
Shipment within 10-20 days
Content
Effect of Interpass Time on the Hot Rolling Behaviour of Microalloyed Steels
Microalloyed Strip Steels for the 21st Century
Modelling the Austenite Decomposition in Steel on a Physical Basis
Alternatives to the Ferrite-Pearlite Microstructures
The Role of Microstructure in Toughness Behaviour of Microalloyed Steels
The Production and Mechanical Properties of Ultrafine Ferrite
Modelling Strain Induced Precipitation of Niobium Carbonitride during Hot Rolling of Microalloyed Steel
Microalloyed Forging Steels
Microstructural Change during the Hot Working of As-Cast Austenite
Modelling of Microstructure and Texture during Annealing of Titanium Alloyed Interstitial Free Steels
Recrystallization Kinetics of Microalloyed Steels Determined by Two Mechanical Testing Techniques
Effect of the Chemical Composition on the Peak and Steady Stresses of Plain Carbon and Microalloyed Steels Deformed under Hot Working Conditions
Effect of Coarse ? Grain Size on the Dynamic and Static Recrystallisation during Hot Working in Microalloyed Nb and Nb-Ti Steels
The Influence of Roughing Strain and Temperature on Precipitation in Niobium Microalloyed Steels after a Finishing Deformation at 900 degreesC
Influence of Processing Conditions and Alloy Chemistry on the Static Recrystallisation of Microalloyed Austenite
Comparison of the Deformation Characteristics of a Ni-30wt% Fe Alloy and Plain Carbon Steel
Combined Effect of Nb and Ti on the Recrystallisation Behaviour of Some HSLA Steels
Effect of Composition and Prior Austenite Deformation on the Transformation Characteristics of Ultralow-Carbon Microalloyed Steels
Nb and the Transformation from Deformed Austenite
The Effect of the Austenitisation Temperature on the Transformation Kinetics of an Nb-Containing Steel
Effect of Retained Strain on the Microstructural Evolution during the Austenite to Ferrite Transformation
Transformation Behaviour and Related Mechanical Properties of B-Added ULC- and IF Steels
The Influence of Aluminium and Silicon on Transformation Kinetics in Low Alloy Steels
Refinement of Ferrite-Pearlite Structures through Transformation from Heavily Deformed Austenite in a Low Carbon Si-Mn Steel
Effect of the Microalloying Elements on Nucleation and Growth Kinetics of Allotriomorphic Ferrite in Medium Carbon-Manganese Steels
The Effect of Si on the Microstructural Evolution of Discontinuously Cooled Strip Steels
Acicular Ferrite Microstructures and Mechanical Properties in a Low Carbon Wrought Steel
Stability of Retained Austenite in a Nb Microalloyed Mn-Si TRIP Steel
Influence of Coiling Temperature on Toughness of Hot Rolled Microalloyed Steels
Morphology and Mechanical Properties of Bainitic Steels Deformed in Unrecrystallized Austenite Region
Process History, Microstructure and Weldability Interactions in Microalloyed Steels
Low Cycle Fatigue Behaviour of a Continuously Cooled V-Bearing Microalloyed Steel
The Role of Carbon in Enhancing Precipitation Strengthening of V-Microalloyed Steels
Hydrogen Induced Cracking Processes in Structural Microalloyed Steels Characterization and Modelling
Precipitation of NbC and Effect of Mn on the Strength Properties of Hot Strip HSLA Low Carbon Steel
The Effect of Mo in Si-Mn Nb Bearing TRIP Steels
Effect of Niobium on the Mechanical Properties of TRIP Steels
Effect of Microalloying and Thermomechanical Processing on the Structure and Mechanical Properties of Constructional Steel
Development Trends in HSLA Steels for Welded Constructions
Cleavage Fracture Micromechanisms in Ti, Ti-V and C-Mn-B Microalloyed Bainitic Steels
An Integrated Model for Microstructural Evolution in the Hot Strip Mill and Tensile Properties Prediction of Plain and Microalloyed C-Mn Hot Strip
Modelling the Hot Working of Simple Geometries Employing Physical-Based Constitutive Equations and the Finite Element Method
Modeling the Critical Strain for the Initiation of Dynamic Recrystallization during the Hot Strip Rolling of Niobium Microalloyed Steels
Numerical Simulation of Temperature Distribution and Cooling Rate in Ship Profiles during Water Spray Cooling
Statistical Modelling of Mechanical Properties of Microalloyed Steels by Application of Artificial Neural Networks
Microstructural Evolution during Induction Hardening Heat Treatment of a Vanadium Microalloyed Steel
Microalloying and a New Post Foring Treatment of Medium Carbon Steels
Acicular Ferrite Microstructures and Mechanical Properties in a Medium Carbon Forging Steel
Effect of Vanadium Alloying on the Precipitation Reactions during Pearlite Formation in Medium and High Carbon Steels
Warm Forging of a Vanadium Microalloyed Steel
Microstructural Characterization and Structure/Property Relations of Microalloyed Medium Carbon Steels with Ferrite-Bainite/Martensite Microstructure
Induction Heating of Microalloyed Forging Steels
The Hot Ductility of V, Nb/V and Nb Containing Steels
The Influence of Composition on the Hot Cracking Susceptibility during Casting of Microalloyed Steels Processed to Simulate Thin Slab Casting Conditions
Hot Ductility of Certain Microalloyed Steels under Simulated Continuous Casting Conditions
The Effects of Ti and S in Direct Rolled Thin Slab Cast Low Carbon Steel
Precipitation of TiN and (Ti,Nb)(C,N) during Solidification, Cooling and Hot Direct Deformation
Influence of Thin Slab Casting on the Properties of Microalloyed Steel for High Cold Forming Requirements
Effect of Additional Elements on the Morphology of TiS in Steels during Solidification
Eutectic Precipitation of (TiNbV)(CN) in Cast, Microalloyed Low-C Austenite and Effects of Reheating
Recrystallization in Ultra Low Carbon (ULC) Steel: Influence of the As-Deformed Microstructure and Texture
Effect of Al Content on r-Value and Recrystallization Texture of B-Bearing Al-Killed Steel Sheets
Effect of Boron Addition on the Dynamic Strain Aging Behavior of a Medium Carbon Steel Wire Rod
Towards a Controlled Bake Hardening by Numerical Calculation of the Precipitate Behaviour during Continuous Annealing of TiNb and Nb Alloyed IF BH Steels
Simulation of Hot-Dip Galvanizing for Automotive Applications: Requirements for Modern Steel Product Design
Influence of Bake Hardenability on the Properties of the IF, BH and Isotropic Sheet Steels
Microalloying with Titanium to Improve Drawability in Low Carbon Wire-Rod Steels
Microalloyed Strip Steels for the 21st Century
Modelling the Austenite Decomposition in Steel on a Physical Basis
Alternatives to the Ferrite-Pearlite Microstructures
The Role of Microstructure in Toughness Behaviour of Microalloyed Steels
The Production and Mechanical Properties of Ultrafine Ferrite
Modelling Strain Induced Precipitation of Niobium Carbonitride during Hot Rolling of Microalloyed Steel
Microalloyed Forging Steels
Microstructural Change during the Hot Working of As-Cast Austenite
Modelling of Microstructure and Texture during Annealing of Titanium Alloyed Interstitial Free Steels
Recrystallization Kinetics of Microalloyed Steels Determined by Two Mechanical Testing Techniques
Effect of the Chemical Composition on the Peak and Steady Stresses of Plain Carbon and Microalloyed Steels Deformed under Hot Working Conditions
Effect of Coarse ? Grain Size on the Dynamic and Static Recrystallisation during Hot Working in Microalloyed Nb and Nb-Ti Steels
The Influence of Roughing Strain and Temperature on Precipitation in Niobium Microalloyed Steels after a Finishing Deformation at 900 degreesC
Influence of Processing Conditions and Alloy Chemistry on the Static Recrystallisation of Microalloyed Austenite
Comparison of the Deformation Characteristics of a Ni-30wt% Fe Alloy and Plain Carbon Steel
Combined Effect of Nb and Ti on the Recrystallisation Behaviour of Some HSLA Steels
Effect of Composition and Prior Austenite Deformation on the Transformation Characteristics of Ultralow-Carbon Microalloyed Steels
Nb and the Transformation from Deformed Austenite
The Effect of the Austenitisation Temperature on the Transformation Kinetics of an Nb-Containing Steel
Effect of Retained Strain on the Microstructural Evolution during the Austenite to Ferrite Transformation
Transformation Behaviour and Related Mechanical Properties of B-Added ULC- and IF Steels
The Influence of Aluminium and Silicon on Transformation Kinetics in Low Alloy Steels
Refinement of Ferrite-Pearlite Structures through Transformation from Heavily Deformed Austenite in a Low Carbon Si-Mn Steel
Effect of the Microalloying Elements on Nucleation and Growth Kinetics of Allotriomorphic Ferrite in Medium Carbon-Manganese Steels
The Effect of Si on the Microstructural Evolution of Discontinuously Cooled Strip Steels
Acicular Ferrite Microstructures and Mechanical Properties in a Low Carbon Wrought Steel
Stability of Retained Austenite in a Nb Microalloyed Mn-Si TRIP Steel
Influence of Coiling Temperature on Toughness of Hot Rolled Microalloyed Steels
Morphology and Mechanical Properties of Bainitic Steels Deformed in Unrecrystallized Austenite Region
Process History, Microstructure and Weldability Interactions in Microalloyed Steels
Low Cycle Fatigue Behaviour of a Continuously Cooled V-Bearing Microalloyed Steel
The Role of Carbon in Enhancing Precipitation Strengthening of V-Microalloyed Steels
Hydrogen Induced Cracking Processes in Structural Microalloyed Steels Characterization and Modelling
Precipitation of NbC and Effect of Mn on the Strength Properties of Hot Strip HSLA Low Carbon Steel
The Effect of Mo in Si-Mn Nb Bearing TRIP Steels
Effect of Niobium on the Mechanical Properties of TRIP Steels
Effect of Microalloying and Thermomechanical Processing on the Structure and Mechanical Properties of Constructional Steel
Development Trends in HSLA Steels for Welded Constructions
Cleavage Fracture Micromechanisms in Ti, Ti-V and C-Mn-B Microalloyed Bainitic Steels
An Integrated Model for Microstructural Evolution in the Hot Strip Mill and Tensile Properties Prediction of Plain and Microalloyed C-Mn Hot Strip
Modelling the Hot Working of Simple Geometries Employing Physical-Based Constitutive Equations and the Finite Element Method
Modeling the Critical Strain for the Initiation of Dynamic Recrystallization during the Hot Strip Rolling of Niobium Microalloyed Steels
Numerical Simulation of Temperature Distribution and Cooling Rate in Ship Profiles during Water Spray Cooling
Statistical Modelling of Mechanical Properties of Microalloyed Steels by Application of Artificial Neural Networks
Microstructural Evolution during Induction Hardening Heat Treatment of a Vanadium Microalloyed Steel
Microalloying and a New Post Foring Treatment of Medium Carbon Steels
Acicular Ferrite Microstructures and Mechanical Properties in a Medium Carbon Forging Steel
Effect of Vanadium Alloying on the Precipitation Reactions during Pearlite Formation in Medium and High Carbon Steels
Warm Forging of a Vanadium Microalloyed Steel
Microstructural Characterization and Structure/Property Relations of Microalloyed Medium Carbon Steels with Ferrite-Bainite/Martensite Microstructure
Induction Heating of Microalloyed Forging Steels
The Hot Ductility of V, Nb/V and Nb Containing Steels
The Influence of Composition on the Hot Cracking Susceptibility during Casting of Microalloyed Steels Processed to Simulate Thin Slab Casting Conditions
Hot Ductility of Certain Microalloyed Steels under Simulated Continuous Casting Conditions
The Effects of Ti and S in Direct Rolled Thin Slab Cast Low Carbon Steel
Precipitation of TiN and (Ti,Nb)(C,N) during Solidification, Cooling and Hot Direct Deformation
Influence of Thin Slab Casting on the Properties of Microalloyed Steel for High Cold Forming Requirements
Effect of Additional Elements on the Morphology of TiS in Steels during Solidification
Eutectic Precipitation of (TiNbV)(CN) in Cast, Microalloyed Low-C Austenite and Effects of Reheating
Recrystallization in Ultra Low Carbon (ULC) Steel: Influence of the As-Deformed Microstructure and Texture
Effect of Al Content on r-Value and Recrystallization Texture of B-Bearing Al-Killed Steel Sheets
Effect of Boron Addition on the Dynamic Strain Aging Behavior of a Medium Carbon Steel Wire Rod
Towards a Controlled Bake Hardening by Numerical Calculation of the Precipitate Behaviour during Continuous Annealing of TiNb and Nb Alloyed IF BH Steels
Simulation of Hot-Dip Galvanizing for Automotive Applications: Requirements for Modern Steel Product Design
Influence of Bake Hardenability on the Properties of the IF, BH and Isotropic Sheet Steels
Microalloying with Titanium to Improve Drawability in Low Carbon Wire-Rod Steels