Engineering Materials: Research and Application Optimization

<ul><li>Preface</li><li>Chapter 1: Optoelectronics and Electronics Devices</li><li>Electrical Properties of GaN Cap Layer for AlGaN/GaN HEMT</li><li>Nanomanipulation of Functionalized Gold Nanoparticles on GaN</li><li>Impact of Notch Structures on Transfer Characteristics of AlGaN/GaN HEMTs: A Simulation Study</li><li>Comparison of the Electrical Performance of AlN and HfO₂Passivation Layer in AlGaN/GaN HEMT</li><li>Microfiber Optics Liquid Refractometer: The Effect of Taper Waist</li><li>Temperature Dependence of Electrical Characteristics of ZnO Nanowire Field-Effect Transistors with AZO and Aluminium Source/Drain Contact</li><li>Study of Strained-SiGe Channel P-MOSFET Using Silvaco TCAD: Impact of Channel Thickness</li><li>Investigation on Absorption and Photocurrent in Silicon Absorber with Varied Pyramid Texture Angles by Ray Tracer</li><li>Chapter 2: Research and Optimisation of Power Electronic Devices on Silicon Carbide</li><li>Threshold Voltage Adjustment on 4H-SiC MOSFETs Using P-Doped Polysilicon as a Gate Material</li><li>Demonstration of SiC Trench Gate MOSFETs with Narrow Cell Pitch Using Source Self-Aligned Process</li><li>Assessing, Controlling and Understanding Parameter Variations of SiC Power MOSFETs in Switching Operation</li><li>Towards Sic-Based VUV Pin-Photodiodes - Investigations on 4H-SiC Photodiodes with Shallow Implanted Al Emitters</li><li>Optimizing PECVD a-SiC:H Films for Neural Interface Passivation</li><li>Effect of Termination Region on Unclamped Inductive Switching Failure for 4H-SiC VDMOS</li><li>Numerical Analysis of the Schottky Contact Properties on the Forward Conduction of MPS/JBS SiC Diodes</li><li>Chapter 3: Green Building Materials and Construction Technology</li><li>The Mechanical Properties and Microstructure of Gypsum Board Manufactured from Water Hyacinth and Coconut Fiber</li><li>Alkaline Activation of Ferrous Foundry Sand: A Look at the Effect of Activator Concentration, Liquid-Solid Ratio and Curing Temperature</li><li>Case Study of Applying 3D Laser Scanning Technology to Spacing Inspection of Rebar Placing Work</li><li>Utilization of Plastic Waste and Waste Rubber Tyres to Modify Bitumen Binder in Road Construction</li><li>Chemical, Mechanical, and Durability of Composites Developed from Aluminum Slag</li></ul>