Condition Monitoring, Troubleshooting and Reliability in Rotating Machinery
Description
Rotating Machinery Fundamentals and Advances represents a broad category of equipment, which includes pumps, compressors, fans, gas turbines, electric motors, internal combustion engines, etc., that are critical to the efficient operation of process facilities around the world. These machines must be designed to move gases and liquids safely, reliably, and in an environmentally friendly manner. To fully understand rotating machinery, owners must be familiar with their associated technologies, such as machine design, lubrication, fluid dynamics, thermodynamics, rotordynamics, vibration analysis, condition monitoring, maintenance practices, reliability theory, and others.
The goal of the "Advances in Rotating Machinery" book series is to provide industry practicioners a time-saving means of learning about the most up-to-date rotating machinery ideas and best practices. This three-book series covers industry-relevant topics, such as design assessments, modeling, reliability improvements, maintenance methods and best practices, reliability audits, data collection, data analysis, condition monitoring, and more.
Readers will find a good mix of theory and sage experience throughout this book series. Whether for the veteran engineer, a new hire, technician, or other industry professional, this is a must-have for any library.
This outstanding new vcolume includes:
Machinery monitoring concepts and best practices
Optimizing Lubrication and Lubricant Analysis
Machinery troubleshooting
Reliability improvement ideas
Professional development advice
<b>ROTATING MACHINERY</b>
<b>This third volume in a broad collection of current rotating machinery topics, written by industry experts, is a must-have for rotating equipment engineers, maintenance personnel, students, and anyone else wanting to stay abreast with current rotating machinery concepts and technology.</b>
Rotating Machinery Fundamentals and Advances represents a broad category of equipment, which includes pumps, compressors, fans, gas turbines, electric motors, internal combustion engines, etc., that are critical to the efficient operation of process facilities around the world. These machines must be designed to move gases and liquids safely, reliably, and in an environmentally friendly manner. To fully understand rotating machinery, owners must be familiar with their associated technologies, such as machine design, lubrication, fluid dynamics, thermodynamics, rotordynamics, vibration analysis, condition monitoring, maintenance practices, reliability theory, and others.
The goal of the "Advances in Rotating Machinery" book series is to provide industry practicioners a time-saving means of learning about the most up-to-date rotating machinery ideas and best practices. This three-book series covers industry-relevant topics, such as design assessments, modeling, reliability improvements, maintenance methods and best practices, reliability audits, data collection, data analysis, condition monitoring, and more.
Readers will find a good mix of theory and sage experience throughout this book series. Whether for the veteran engineer, a new hire, technician, or other industry professional, this is a must-have for any library.
<b><i>This outstanding new vcolume includes</i>:</b>
<ul><li>Machinery monitoring concepts and best practices</li><li>Optimizing Lubrication and Lubricant Analysis</li><li>Machinery troubleshooting</li><li>Reliability improvement ideas</li><li>Professional development advice</li></ul>More details
Other editions
Additional editions
Person
<b>Robert X. Perez</b> is a mechanical engineer with more than 40 years of rotating equipment experience in the petrochemical industry. He has worked in petroleum refineries, chemical facilities, and gas processing plants. He earned a BSME degree from Texas A&M University at College Station, an MSME degree from the University of Texas at Austin and holds a Texas PE license. Mr. Perez has written numerous technical articles for magazines and conferences proceedings and has authored five books and coauthored four books covering machinery reliability, including several books also available from Wiley-Scrivener.
Content
Preface xix
Acknowledgements xxi
<b>Part 1: Condition Monitoring 1</b>
<b>1 An Introduction to Machinery Monitoring 3
</b><i>By Robert X. Perez</i>
<b>2 Centrifugal Pump Monitoring, Troubleshooting and Diagnosis Using Vibration Technologies 15
</b><i>By William D. Marscher</i>
Introduction 15
Vibration Definitions 16
How Vibration vs. Time Relates to a Vibration vs. Frequency "Spectrum" 18
What are Reasons for Excess Vibration? 19
Relationship of Vibration to Centrifugal Pump Acceptability and Reliability 20
Vibration Standards, Informal and Formal: Intent and Basis 21
Vibration Measurement Form 22
Vibration Detection Sensors 25
Accelerometers 26
Proximity Probes 27
Motion Magnified Video (aka Vibration Video Amplification) 28
International Vibration Acceptance Standards 30
Pump Components Playing Key Roles in Vibration Diagnostics 33
Rotor Support by Bearings: Fluid Film Journal Bearings vs. Rolling Element Bearings 33
Rotor Support by Seals: Annular Seal "Lomakin Effect" 35
Couplings 38
Bearing Housings and Attachment Bolts 39
Pump Casing, Feet, and Foot Attachment Bolts 39
Pump Pedestals, Baseplate, and Foundation 40
Piping, Suction, and Discharge 40
Pump Drivers 43
Evaluating Causes of Excess Vibration: Excitation vs. Amplification 43
Process of Resonant Amplification due to Coincidence of Excitation and Natural Frequencies 45
Impact Test Method of Determining Natural Frequencies 46
Specific Forces in Centrifugal Pumps 48
Mechanical Excitation Forces 48
Balance 48
Misalignment 50
Mechanical Forces Due to Dry Running Pump, Dry Running Seal, Overtightened Seal 52
Hydraulic Forces and Blade Passing Frequency 52
Hydraulic Vibration Forces Below Running Speed, Including Subsynchronous Whirl 54
Detection of Effects of Cavitation 57
Torsional Excitations 59
Vibrations Particular to Various Centrifugal Pump Types 62
Vertical Turbine Pump Evaluation 62
Vertical Dry Pit Pump Vibration Issues 65
Submersible Pump Vibration Issues 65
End Suction Overhung Single Stage Pump Vibration Issues 66
Between Bearing Double Suction Single Stage Pump Vibration Issues 66
Horizontal Multistage Pump Vibration Issues 67
Steps in Pump Evaluation through Vibration Monitoring 68
Use of the Bode and Nyquist Plots to Confirm Natural Frequencies 70
Operating Deflection Shapes (ODS) 71
Conclusions 73
Nomenclature 73
References & Bibliography 74
Acknowledgements 75
<b>3 Proximity Probes are a Good Choice for Monitoring Critical Machinery with Fluid Film Bearings 77
</b><i>By Robert X. Perez</i>
Proximity Probe Benefits 77
Theory of Operation 78
Runout Concerns 80
Grounding and Noise 80
Shaft Orbits 81
General Machinery Monitoring Recommendations 82
Final Thoughts 85
References 86
<b>4 Optimizing Lubrication and Lubricant Analysis 87
</b><i>By Jim Fitch and Bennett Fitch</i>
Introduction 87
Optimum Reference State 88
Lubrication Excellence and the Ascend Chart 91
Bringing Awareness to Lubrication, Contamination, and Oil Analysis 94
What You Might Not Know About Lubrication 94
Machine Surface Interaction 94
The Lubricant Film 95
Film Strength 96
Unlubricated Surface Interactions 96
Friction and Wear Generation 96
Mitigating Surface Interactions 97
Physics and Chemistry 97
Contamination: The Antagonist to Lubrication 98
Contamination Control and Condition Monitoring is More Often about Training than Advanced Technology 98
Contamination Control 99
Don't Leave It to Instinct 99
Creating a Balance Between Exclusion and Removal 100
Why Perform Oil Analysis 102
Fluid Properties Analysis 102
Contamination Analysis 103
Wear Debris Analysis 103
Achieving Oil Analysis Success by Looking Holistically 103
Obtaining a Representative Oil Sample 105
Select the Right Machines for Oil Analysis 105
Clean and Correct Sampling Containers and Extraction Tools 105
Correctly Located Sampling Ports 106
Proper Sampling Frequency 107
Proper and Consistent Sampling Procedures 107
Forward Samples Immediately to the Laboratory 108
Ensuring Reliable Testing 108
Certified Training of Laboratory Technicians 108
Optimized Selection of Tests 109
Onsite Oil Analysis 109
Determining the Optimum Course of Action 110
Effective Organization of Analysis with Proper Trending 110
Accurate Data Interpretation by the Laboratory 110
Enhanced Data Interpretation by the End-User 111
Take Corrective Action and Determine the Root Cause 112
Continuous Improvement and Key Performance Indicator (KPI) 112
Oil Analysis Tests 112
Viscosity 113
Acid Number and Base Number 113
Ftir 114
Elemental Analysis 114
Particle Counting 114
Moisture Analysis 115
Interpreting Oil Analysis Reports 116
Following the Data Trends 118
Looking Back at the Past 123
Inspection 2.0: Advances in Early Fault Detection Strategy 124
Low-Hanging Fruit 124
Inspection Frequency Trumps High Science 125
Beware of Short P-F and Sudden-Death Failures 127
Inspection Windows and Zones 128
Inspection 2.0 is a Nurturing Strategy 129
Final Tips to Help Error-Proof Your Lubrication Program 130
References 134
<b>5 Troubleshooting Temperature Problems 135
</b><i>By Robert X. Perez</i>
Temperature Assessments 135
How do Infrared Thermometers Work? 136
Bearing Temperature Trending 137
Rolling Element and Sleeve Bearing Temperature Guidelines 139
Rule of Thumb for Rolling Element Bearings: 142
Bearing Temperature Guidelines for Instrumented Hydrodynamic Bearings 142
Recommended Guidelines for Babbitt Bearings 142
Bearing Temperature Sensor Placement 143
Sleeve Bearings 143
Tilting Pad Journal (TPJ) Bearings-Load on Pad 144
Tilting Pad Journal Bearings-Load between Pads 144
Thrust Bearings-Tilting Pad 144
General Temperature Probe Installation Guidelines 145
Compressor Discharge Temperature Assessments 146
Heat of Compression 146
Types of Compression Processes 147
Adiabatic Compression 148
Polytropic Compression 152
Polytropic Example 1: 154
Polytropic Example 2: 154
Why Compression Ratio Matters 155
What Role It Plays in Compressor Design and Selection 155
Compression Ratio versus Discharge Temperature 155
Design Temperature Margin 158
Design Tradeoffs 159
Reciprocating Compressor Temperature Monitoring 160
Valve Temperature Monitoring 162
Temperature Monitoring Example 164
Summary 165
References 165
<b>6 Assessing Reciprocating Compressors and Engines 167
</b><i>By Robert X. Perez</i>
Overview of Reciprocating Compressors 169
General Monitoring Guidelines for Reciprocating Compressors 174
Impact Monitoring 177
Rod Drop Monitoring 178
Using Ultrasonics to Assess Reciprocating Machinery 178
Mystery Reciprocating Compressor Knock 179
Natural Gas Engines 181
How Accurate are Rotating Equipment and Reciprocating Equipment Analyst Findings? 190
References 193
<b>7 Managing Critical Machinery Vibration Data 195
</b><i>By Robert X. Perez</i>
Beware of False Positives and False Negatives 195
Vibration Analysis Strategies 197
<b>Part 2: Troubleshooting 201</b>
<b>8 Addressing Reciprocating Compressor Piping Vibration Problems: Design Ideas, Field Audit Tips, and Assessment Methods 203
</b><i>By Robert X. Perez</i>
Piping Restraints 205
Pipe Clamping Systems 207
Guidelines 207
Preloading Clamp Bolts 209
Piping Assessment Steps 210
Small-Bore Piping 211
Attaching Pipe Clamps to Structural Members 212
The Ideal Pipe Clamp Installation 213
Installation Examples 214
Collecting and Assessing Piping Vibration 217
Piping Analysis Steps 220
Piping Vibration Examples 221
Bolt Torque Tables 223
Chapter Glossary 224
<b>9 Remember to Check the Rotational Speed When Encountering Process Machinery Flow Problems 227
</b><i>By Robert X. Perez</i>
<b>10 Troubleshooters Need to be Well Versed in the Equipment They are Evaluating 233
</b><i>By Robert X. Perez</i>
What is the Difference Between Troubleshooting and Conducting a Failure Analysis? 236
Equipment Details 237
Performance Characteristics 238
Centrifugal Compressors 238
Reciprocating Compressors 239
Basic Fluid Film Bearing Troubleshooting Tips 240
Design Basis: Speed, Pressures, Flows 241
System Design Details 243
OEM Recommendations 244
History 244
Putting it All Together 245
<b>11 Precise Coupling Properties are Required to Accurately Predict Torsional Natural Frequencies 247
</b><i>By Robert X. Perez</i>
Introduction 247
Case Study 247
Start-Up Issues 249
Field Vibration Study 249
Lesson Learned 252
Final Thoughts 253
<b>12 Is Vibration Beating on Machinery a Problem? 255
</b><i>By Robert X. Perez and Andrew P. Conkey</i>
What is Vibration Beating? 255
Zoom FFT (Fast Fourier Transform) Analysis 257
Electric Motor Zoom Analysis 258
Field Case Study: "Beating" Effect Caused by Two Closely Spaced Mechanical Frequencies Observed on Two-Shaft, Gas Turbine Drive 259
Background Information 260
Vibration Response Analysis 261
Investigation of System and Analysis 261
Frequency Analysis 262
Case Study Solution 263
Case Study Conclusions and Lessons Learned 263
Final Comments 263
References 264
<b>Part 3: Reliability 265</b>
<b>13 Using Standby Machinery to Improve Process Reliability 267
</b><i>By Robert X. Perez</i>
Introduction 267
Basic Reliability Theory 267
Exercising Spared Machinery 273
Alternating Twin, Non-Critical, Process Pumps 273
Recommended Swapping Procedures for Critical Motors, Pumps, Blowers, Compressors, Generators, and Steam Turbines 274
Recommended Swapping Procedures for Reciprocating Process Plant Machinery above 200 HP 275
Raptor Modeling Software 276
Modeling Examples 277
Example 1: Unspared Compressor 278
Example 2: Main and Spare Compressor Installation 279
Example 3: Two out of Three (2oo3) Compressor Configuration 280
The Cost of Redundancy 282
Example 4: Cost of Unreliability 283
Economics 284
Justifying of a Spare Compressor 285
Closing Thoughts 287
References 287
<b>14 Gas Turbine Drivers: What Users Need to Know 289
</b><i>By Robert X. Perez</i>
Overview 289
Theory of Operation 292
How Does a Gas Turbine Work? 292
Air Compressor 294
Combustors 296
Transition Pieces 297
Expansion Turbine 298
Turbine Section Challenges and Solutions 299
Two Shaft Gas Turbine Construction Details 301
Gas Producer 301
Lower Pressure Power Turbine (LP) 301
Typical Conditions Inside an Industrial Gas Turbine 303
Effect of Atmospheric Conditions 304
Gas Turbine Controls 305
Protection 305
Fuel and Fuel Treatment 306
Gas Fuels 306
Degradation and Water Washing 306
Advanced Materials for Land Based Gas Turbines 307
Blade Degradation 308
Condition Monitoring Approaches 309
Aerothermal Performance Analysis 309
Vibration Analysis 310
Transient Analysis 311
Mechanical Transient Analysis 311
Dynamic Pressure Analysis 312
Lube Oil Debris Analysis 312
Borescope Inspection 312
Condition Monitoring as a System 313
Gas Turbine Maintenance Inspections 313
Standby Inspections 314
Running Inspections 314
Combustion Inspections 316
Hot Gas Path Inspections 316
Major Inspections 316
Life Cycle Management 318
Non-Destructive Testing (NDT) 320
Spare Parts 321
Final Words of Advice 322
References 323
<b>15 Reliability Improvement Ideas for Integrally Geared Plant Air Compressors 325
</b><i>By Abdulrahman Alkhowaiter</i>
Integrally Geared Plant Air Compression Packages 325
Reliability Concerns 327
Developing Enhancements for Air Compressor Reliability and Performance 330
Reliability Improvement Program to Achieve Reliability and Eliminate Frequent Failures 330
Reliability Improvements (based on 2008 Report) Made to Five (5) 850 HP Air Compressor Failures by Engineering and Maintenance: 331
<b>16 Failure Analysis & Design Evaluation of a 500 KW Regeneration Gas Blower 341
</b><i>By Abdulrahman Alkhowaiter</i>
Introduction 341
Detail Design Analysis 343
Conclusion 349
Needed Action by Repair Shop 350
Action Required by Refinery 350
<b>17 Operating Centrifugal Pumps with Variable Frequency Drives in Static Head Applications 353
</b><i>By Robert X. Perez</i>
VFD Advantages 354
Static Head Systems 356
Recommended Startup Sequence 359
Final Thoughts 362
References 362
<b>18 Estimating Reciprocating Compressor Gas Flows 363
</b><i>By Robert X. Perez</i>
Swept Volume 364
Clearance Volume 365
Volumetric Efficiency 365
Flow Calculation Example 370
Factors Affecting Compressor Flow 371
Final Words 371
<b>19 Use Your Historical Records to Better Manage Time Dependent Machinery Failure Modes 373
</b><i>By Robert X. Perez</i>
<b>Part 4: Professional Development 379</b>
<b>20 Soft Skills and Habits that All Machinery Professionals Need to Develop 381
</b><i>By Robert X. Perez</i>
Asking Probing Questions 383
Listening More Carefully 384
Observing 385
Continuously Learning 386
Praising 387
Teaching 388
Closing Remarks 390
<b>21 Developing Rotating Machinery Competency 391
</b><i>By Robert X. Perez</i>
<b>Part I: Preparing Students to Work with Rotating Machinery 391</b>
Rotating Machinery Related Job Functions 391
<b>Part II: Steps to Improving Rotating Machinery Competency: Study-Practice-Share 396</b>
About the Editor 403
About the Contributors 405
Index 409