Engineering Plasticity and Its Applications

<ul><li>An Internal Variable Approach to Inelastic Deformation Including Structural Superplasticity</li><li>Mechanics of Carbon Nanotubes: A Continuum Theory Based on Interatomic Potentials</li><li>Plasticity-Related Microstructure-Property Relations for Materials Design</li><li>Discrete Dislocation Modeling of Plastic Flow Processes</li><li>Nanoindentation-Induced Collective Dislocation Behavior and Nanoplasticity</li><li>Analyses of Cavitation Instabilities in Ductile Metals</li><li>The Effect of Heating Rate on the Formability of Bulk Metallic Glass in a Supercooled Liquid Region</li><li>Investigation of the Dynamic Buckling in the Carbon Nanotube under Impact Torque</li><li>Deformation Behavior of Dual-Phase LTSP Ti₃Al Based Alloy</li><li>Evaluation of Adhesive Properties of Arc PVD Coatings on Non-Nitrided and Nitrided Various Substrates</li><li>Mechanical Alloying of Ti-Al-Si-C Powders, their Thermal Stability, Phase Evolution, and Synthesis and Deformation of In Situ Produced Titanium Aluminide Composites</li><li>High Temperature Deformation Behaviour of a New Magnesium Alloy</li><li>Micromechanical Study on High-Temperature Behavior of ZrO₂ Particle-Dispersed Ni Composites</li><li>Evaluation of Strain Concentration in Carbon Nanotube with Bend Junction</li><li>High Strain Rate Deformation Behavior of Mg-Al-Zn Alloys at Elevated Temperatures</li><li>Mechanical Properties of Bulk Glassy Metal after Deformation under High Temperature Conditions</li><li>Effects of Strain Rate and Temperature on Yield Locus for AZ31 Magnesium Alloy Sheet</li><li>Elastoplastic Behavior of Particle Reinforced Composites Considering the Effect of Interfacial Debonding</li><li>Inelastic Behaviour of Concrete/Steel Composite Beam in Fire</li><li>Possible Approaches in Modelling Rearrangement in a Microstructured Material</li><li>Proposal of Various Connecting Methods of Fiber Strands and Finite Element Method Analysis of Strength</li><li>Rate-Dependent Off-Axis Tensile Behavior of Cross-Ply CFRP Laminates at Elevated Temperature and Simulation Using a Viscoplasticity Model</li><li>Effects of Stacking Sequence on Notched Strengths of Cross-Ply CFRP Laminates and Analysis Using a Cohesive Zone Model</li><li>A Modified Kinematic-Hardening Viscoplasticity Model for Off-Axis Creep Behavior of Unidirectional CFRPs at High Temperature</li><li>Evaluation of the Interfacial Properties in Polymer Matrix Composite: Experiments and Elasto-Plastic Shear-Lag Analysis</li><li>Higher-Order Stress due to Self Energy of Geometrically Necessary Dislocations</li><li>Forming Limits Prediction of FCC Sheet Metal Adopting Crystal Plasticity</li><li>High Density Bands of GN Dislocations Formed by Multi Body Interaction in Compatible Type Multi Crystal Models</li><li>Dependence of Localized Deformation on Point Defect Development Caused by Intersected Cross Slip among Dislocations</li><li>Crystal Plasticity Analysis of Dislocation Accumulation in ULSI Cells with Consideration of Temperature Dependence of the Lattice Friction Stress for Silicon</li><li>Multiscale Modeling and Simulation of Crystal Plasticity Based on Dislocation Patterning in Polycrystal</li><li>Effects of Crystallographic Texture on Plastic Flow Localization</li><li>New Physical Interpretation of Incompatibility and Application to Dislocation Substructure Evolution</li><li>Inspection and Model Experiment of a Damaged Arch Bridge</li><li>Destructive and Ultrasonic Investigations of Damage Development in Metallic Materials</li><li>Continuum Damage Model of Creep-Fatigue Interaction in Ni-Base Superalloy</li><li>Elastic-Plastic Deformation of Perforated Sheets with Randomly Distributed Holes</li><li>Tensile Mechanical Properties of AM50A Alloy by Hopkinson Bar</li><li>Dynamic Tensile Characteristics of TRIP-Type and DP-Type Sheets for an Auto-Body</li><li>Elastic-Plastic Dynamic Response of the Tube with Free Boundary Condition Subjected to Impact</li><li>Counterintuitive Dynamic Behavior in Elastic-Plastic Structures</li><li>Evaluation of Dynamic Behaviors and Damage Mechanism of Ancient Timber Architectures</li><li>The Effect of Strain Rate on the Material Characteristics of Nickel-Based Superalloy Inconel 718</li><li>A Dynamic Damage Model for Uniaxial Compressive Response of AD90 Alumina</li><li>Three Modes of Penetration Mechanisms of A3 Steel Cylindrical Projectiles Impact onto 45 Steel Plates</li><li>On Dynamical Systems at the Portevin-Le Chatelier Effect</li><li>Periodic Motions and Bifurcations of a Plastic Impact Machine</li><li>Improvement of Measurement Accuracy of Non-Coaxial Hopkinson Bar Method</li><li>Deformation and Failure Behaviors of PC/ABS (50/50) Blends under Impact</li><li>Finite Element Analysis of Alternate Hard and Soft Multi-Layers under Circumscription Loading</li><li>Development of Stereolithography Simulation Process Based on the Dynamic Finite Element Method</li><li>The Elasto-Plastic and Geometrically Nonlinear Finite Element Model of Space Beam Considering Restraint Torsion</li><li>An Elasto-Plastic Finite Element Simulation of the UO-Tube Processes of Sheet Metal</li><li>Solid Shell Element and its Application in Roll Forming Simulation</li><li>3-D Finite Element Simulation of Pulsating T-Shape Hydroforming of Tubes</li><li>Automatic Approach on Derivation of Loading Path Using Adaptive Finite Element Analysis Simulation Method</li><li>Three-Dimensional Numerical Manifold Method Based on Hexahedron Element with Full First-Order Cover Function and its Application in Underground Excavation</li><li>Development of PC Cluster Parallel Processing Scheme of 3-D Rigid-Plastic Finite Element Method Using Diagonal Matrix</li><li>Numerical Investigation of Flexural Properties of Sheet Metals Subjected to Embossing and Restoration Process</li><li>Dynamic Indentation and Penetration Properties of Aluminium Foams</li><li>The Dependence of the Energy-Absorption Capacity of Metal Hollow Sphere Materials on their Relative Density</li><li>Dynamic Mechanical Behaviors of Aluminium Foam Filled Circular Tubes under Transverse Compressive Load</li><li>Constitutive Relation of Open-Celled Metal Foams Based on the Mesoscopic Behavior of Random Cells</li><li>Development of 3-Dimensional Compression Device and its Application to Clarification of Densification Behavior of Urethane-Foam</li><li>Compressive Properties of Porous Metals with Homogeneous Pore Characteristics</li><li>Modeling of Fretting Wear Based on Cumulative Plastic Strain and Saturated Shear Stress</li><li>A Gray Prediction Model for Unequal-Interval Time Sequence and its Application in Creep Fracture Mechanics</li><li>Estimation of Hysteretic Energy of MDOF Structures Based on Equivalent SDOF Systems</li><li>The Static and Dynamic Fracture Test of X70 Pipeline Steel</li><li>Fracture Parameters on Three-Dimensional Sliding Mode Fracture</li><li>Interfacial Cracks of Antiplane Sliding Mode between Usual Elastic Materials and Quasicrystals</li><li>Combined Adaptive Finite Element Method and J-Domain Integral Technique for Crack Problems</li><li>Investigation on a Mn-Ti High Strength Steel</li><li>Mechanics Analysis on Bar Cutting Based on High Speed and Restrained State</li><li>Fracture Properties of Softwood under Mode I Loading Perpendicular to the Grain</li><li>A Study on the Application Infrared Thermography Camera for the 7FA Gas Turbine Blade Covering Crack Detecting</li><li>Effect of Pitting Corrosion on Ultimate Strength of Web Plates Subjected to Shear Loading</li><li>Optimum Performance of High Tension Steel Sheets under Various Heat Treatment Process</li><li>Increase of Stress Intensity near Free-Edge of Elastic-Creeping Bi-Material Interface under a Sustained Load</li><li>Influence of Tensile Pre-Strain on the Torsional Fatigue Crack Behaviors of a Structural Steel</li><li>Characteristics of Complementary Plastic Energy Produced by Hysteresis Curves and Analyses of Microstructures in Fatigued Metals</li><li>Effects of Roller Working and Ion Nitriding on Fatigue Properties of Eutectoid Steel</li><li>Effect of Additional Shear Strain Layer on Microstructure and Tensile Strength of Fine Wire</li><li>EBSD-AFM Hybrid Analysis of Crack Initiation in Stainless Steel under Fatigue Loading</li><li>Effect of Mean Stress on Fatigue Strength of Short Glass Fiber Reinforced Polybuthyleneterephthalate</li><li>Effect of Plastic Working on Pulsating Fatigue Strength of Notched Specimen</li><li>Evaluation of Fracture Surface of 11/4Cr-1/2Mo Steel by Residual Magnetization Induced from Inverse-Magnetostrictive Effect</li><li>Techniques for Determining Mechanical Properties of Power-Law Materials by Instrumented Indentation Tests</li><li>Micro-Indentation of Metal Matrix Composite - An FEM Investigation</li><li>Plasticity Characteristics of Beta Titanium Alloy Obtained Using Depth-Sensing Nano-Indentation Test</li><li>A Numerical and Experimental Analysis on the Forming Limit of AA 3105 Aluminum Alloy in Radial Extrusion Process</li><li>Formability Evaluation of Coated and Uncoated Steel Sheets with Consideration of Frictional Characteristics</li><li>Effect of the Surface Defects on Hydroformability of Aluminum Alloys</li><li>Preform Design for Formability Enhancement of Tube Hydroforming Process Using Deformation History</li><li>Formability of Al6061 Extruded Tube in Warm Hydroforming</li><li>Formability of Roll Cast Recycled Aluminum Alloy</li><li>Computer Aided Simulation of the Rheology Forging Process for Aluminum Alloys and its Experimental Investigation</li><li>Texture Evolution and Grain Refinement in AA1050 Aluminum Alloy Sheets Asymmetrically Rolled with Varied Shear Directions</li><li>Adaptive Simulations of T-Shape Tube Hydroforming Processes</li><li>Model Building of Finishing Temperature Control for Accelerative Hot Strip Rolling</li><li>Numerical Simulation of Warm Deep Drawing of AZ31 Magnesium Alloy Sheet with Variable Blank Holder Force</li><li>Deformation Analysis of Co-Extrusion Process of Aluminum Alloy and Copper Alloy</li><li>Forming Load Characteristics of Forward and Backward Tube Extrusion Process in Combined Operation</li><li>A Study on the Pressure Distribution along the Powder-Die Interfaces in Powdered Metal Compaction Process</li><li>Knowledge Discovery and Management from Numerical Simulation and its Application to Robust Optimization of Extrusion-Forging Processing</li><li>Evaluation of Hole Flangeability of Steel Sheet with Respect to the Hole Processing Condition</li><li>Study on Metal Forming by Macro-Micro Combine Numerical Analysis</li><li>An Experimental Study on the Friction Characteristics in Tube Hydroforming Process</li><li>Pass Schedule of Wet-Wire Drawing Process with Ultra High Speed for Tire Steel Cord</li><li>Numerical and Experimental Approach for Rectangular Cup of Li-Ion Battery Container with Extreme Aspect Ratio</li><li>Flow and Temperature Analysis of Molten Pool in Twin-Roll Strip Casting Process</li><li>On-Line Optimization of Coiling Temperature Control on Run-Out Table for Hot Strip Mills</li><li>Mechanics of a Special Asymmetric Rolling of Thin Strip</li><li>Analysis of the Process of AA-6201 Feedstock Using Continuous Casting and Extrusion</li><li>Web Based Shape Inspection System for the Forging Products Having Complicated Shapes</li><li>The 3D Modeling of Dies Based on UG and Numerical Simulation of the Heat Rheological Forming of Titanium Alloy Vane Disk</li><li>Upper Bound Solution to Compression Forming of Three-Layer Bounded Clad Sheet</li><li>Hot Forging Comparative Analyses by Using a Combined Finite Element Method</li><li>Effect of Tool Modeling Accuracy on Sheet Metal Forming Simulation</li><li>Resistance Heating Characteristics of High-Strength Steel Sheet Blank for Hot Press Forming</li><li>Protection against Slippage between Roll and Material in the Rolling of Lumber</li><li>Increase of Wall Thickness around Corner of Multi-Stage Drawn Cup with Flange Using Conical Punches</li><li>Reduction of Stages in Multi-Stage Metal Forming Process Based on Numerical Optimization in Conjunction with FE Simulation</li><li>Optimum Design of Forming Sequence of One-Piece Automobile Steel Wheels without Welding Using Finite Element Simulation</li><li>Modelling of Dynamic Recrystallization in Hot Working</li><li>A Thermodynamically Consistent Eulerian Description of Finite Elastoplasticity</li><li>Long Term Creep Analysis of Pipe Bends in a Steam Transfer Line at Elevated Temperature</li><li>Quantitative Description of Microscopic Plastic Deformation of Polycrystalline Aluminum Using Laser-Scanning Microscope</li><li>Modeling of Large-Strain Cyclic Plasticity for Accurate Springback Simulation</li><li>Constitutive Modeling for Uniaxial Time-Dependent Ratcheting of SS304 Stainless Steel</li><li>Dynamic Strain Aging during the Plastic Flow of Metals</li><li>Calibration of Texture-Adjusted Strain-Rate Potential and its Application</li><li>Effect of Texture on High Temperature Deformation Behaviors of Ti-6Al-4V Alloy</li><li>Plasticity as a Lifesaver in the Design of Cardiovascular Stents</li><li>Plasticity in the Mechanical Behaviour of Cardiovascular Stents during Stent Preparation (Crimping) and Placement (Expansion)</li><li>The Influence of Cladding on the Springback of 2024-T3 Aluminium Alloy</li><li>Ratchetting and Creep Deformation of Solder Alloys</li><li>Plastic Flow Joining by Shot Peening</li><li>Relationship between Phenomenological Constitutive Model and Dislocation Structure in Cyclic Plasticity of Austenitic Stainless Steel</li><li>Simulation of Inelastic Deformation and Thermal Mechanical Stresses in Twin-Roll Casting Process of Mg Alloy</li><li>Plastic Behavior of Polycrystalline Aluminum during Biaxial Compression with Strain Path Change</li><li>Elasto-Plastic Deformation around Neighboring Holes in Solid Metal under Biaxial Compression</li><li>Plastic Deformation Behavior of High Strength Steel Sheet under Non-Proportional Loading and its Modeling</li><li>An Anisotropic Constitutive Model for a Directionally Solidified Superalloy</li><li>Implicit Stress Integration for High-Temperature Inelastic Constitutive Models Using Linearization</li><li>Processing Conditions and Mechanical Properties of Fine Grained Mg by Equal Channel Angular Pressing</li><li>Comparison of Age-Hardening Characteristic in Thixo-Cast and Rheo-Cast T5-A356 Alloys by Nanoindenter and AFM</li><li>Experimental Study on Mechanical Energy Hysteresis in Nano Colloidal Damper Using Porous Silica Particle</li><li>Thermal Imprint Process of Parylene for MEMS Applications</li><li>Grain Refinement and Strengthening of a Cylindrical Pure-Aluminum Specimen by Using Modified Equal-Channel Angular Pressing Technique</li><li>Fatigue Damage Mechanism of Nanocrystals in ECAP-Processed Copper Investigated by EBSD and AFM Hybrid Methods</li><li>Molecular Dynamics Simulation on Crack Initiation at Bi-Material Interface Edges</li><li>A New Method for Stress and Deformation Analysis from Nano to Macro Dimensional Scales</li><li>Study on Nanolithography Process of Polycrystalline Copper Using Molecular Dynamic Simulation</li><li>Molecular Dynamics Analysis on Initial Texture and Processing Route Influences on Grain Refinement Behavior of ?-Fe by Equal Channel Angular Pressing</li><li>Dislocation-Grain Boundary Interactions by the Quasicontinuum Method</li><li>Molecular Dynamics Analysis for Deformation and Fracture Behavior of Copper Thin Films</li><li>Molecular Dynamics Analysis on Crack Growth Behavior in Single and Nano-Crystalline Fe by the Use of FS-2NNMEAM Hybrid Potential</li><li>Global vs. Local Stability of Polycrystalline and Amorphous Metals: Molecular Dynamics Study</li><li>Manipulation of Intrinsic Localized Modes by Elastic Waves in One Dimensional Anharmonic Lattice Systems</li><li>Molecular Dynamics Simulations of Crystal Rearrangement at Grain Boundaries and the Vicinity</li><li>Multi-Scale Modeling of Surface Topography in Single-Point Diamond Turning</li><li>Strain-Rate-Dependent Deformation Behavior of Carbon-Black-Filled Rubber under Monotonic and Cyclic Straining</li><li>Numerical Evaluation of Micro- to Macroscopic Mechanical Behavior of Plastic Foam</li><li>Macroscopic Properties of Inhomogeneous Material with Randomly Distributed Pores</li><li>Elastic-Plastic Constitutive Equation Accounting for Microstructure</li><li>Microscopic Interlaminar Stress Analysis of CFRP Cross-Ply Laminate Using a Homogenization Theory</li><li>A Polycrystalline Analysis of Hexagonal Metal Based on the Homogenized Method</li><li>Implicit Formulation of Homogenization Method for Periodic Elastoplastic Solids</li><li>Metallo-Thermo-Mechanical Simulation of Carburized Quenching Process by Several Codes - A Benchmark Project -</li><li>The Effect of Macroscopic Stress State on Transformation Rate in TRIP-Assisted Steels</li><li>Phase-Field Simulation of Surface Morphology Evolution during Epitaxial Growth of SiGe/Si System</li><li>Temperature and Strain Rate Effects on Mechanical Behavior of a PMMA</li><li>Study on the Microstructure and Mechanical Properties of PET and PET/PTT Blends</li><li>Application of Time-Temperature-Stress Superposition Principle to Nonlinear Creep of Poly(methyl methacrylate)</li><li>Viscoplastic Constitutive Equation of High-Density Polyethylene</li><li>Finite Element Analysis of V-Bending of Polypropylene Using Hydrostatic-Pressure Dependent Plastic Constitutive Equation</li><li>Multiscale Modeling for Large Deformation of Glassy Polymer Based on Molecular Chain Slip Model and Probabilistic Response Law of Inelasticity</li><li>Seismic Damage Characteristics of RC Shear Wall with Diagonal Profile Steel Braces by Experiment</li><li>Experimental Study on Mechanical Property of Steel Reinforced Concrete Short Columns of T-Shaped</li><li>Elastoplastic Damage Modelling and Failure Analysis of Concrete in Compression</li><li>Coupling Analysis between Stress Induced Anisotropic Damage and Permeability Variation in Brittle Rocks</li><li>Seismic Performance of a Reinforced Lightweight Aggregate Concrete Frame</li><li>Research on the Failure Process of Rocks under Tensile Loading Using Elasto-Plastic CA Model</li><li>Experimental Study on Elastic-Plastic Behavior of a Sandstone under Ground Temperature</li><li>Statistical Analysis on Strength of Rock Based on YAI Concept</li><li>Genetic Analysis of Concrete Crack in Hydroelectric Station's Plant Based on FEM</li><li>Study on the Mechanical Property and the Evolutionary Neural Network Constitutive Model for Limestone under Chemical Corrosive Environments</li><li>Hysteresis Model for Superelasticity of Shape Memory Alloy Based on ANN</li><li>Numerical Simulation for Stress-Induced Phase Transformation of SMAs Tube under Tension</li><li>Shape Memory Composite of SMA and SMP and its Property</li><li>Influence of Strain Ratio on Bending Fatigue Life in TiNi Shape Memory Thin Wire</li><li>A Numerical Investigation of Interface Dynamics during Martensitic Transformation in a Shape Memory Alloy Using the Level-Set Method</li><li>Deformation Behavior of Shape-Control Plate Using NiTi Shape Memory Alloy Wire</li><li>Superelastic Deformation Properties of TiNi Shape Memory Alloy</li><li>Shape Recovery and Secondary-Shape Forming in Polyurethane-Shape Memory Polymer</li><li>A Hydro-Mechanical Coupled Analysis of an Unsaturated River Embankment due to Seepage Flow</li><li>Parameter Identification of Soil Hyperbolic Constitutive Model by Inverse Analysis Procedure</li><li>Influence of Soil Dilatancy on Soil Nail Pull-Out Resistance in Completely Decomposed Granite Fill</li><li>Prediction of Pressure and Density Dependent Failure in Sand-Like Granular Materials under General Stress Conditions</li><li>Numerical Modelling of Soft Soil Installed by PVDs</li><li>The Influence of the Fluctuation of Micro-Polar Boundary Conditions on the Evolution of Shear Strain Localization in Granular Materials</li><li>Deformation Analysis of Partially Saturated Soil in Slopes</li><li>Unified Three-Dimensional Revision of Modified Cam Clay Model</li><li>An Elastoplastic Model for Granular Materials Exhibiting Particle Crushing</li><li>Analysis of Soil-Structure Interaction with Finite Element Method</li><li>Strength and Interaction of Soil Reinforced with Three-Dimensional Elements</li><li>A Finite Element Analysis of the Thermo-Hydro-Mechanically Coupled Problem of a Cohesive Deposit Using a Thermo-Elasto-Viscoplastic Model</li><li>Study of Design and Evaluation of Drum Assembly for High Speed Dehydration in Washing Machine</li><li>Stringer Stiffened Cylinders on Local Supports - The Plastic Buckling Behavior</li><li>Analysis of Elasto-Plastic Stresses and Structural Reliability of a Multilayer Pressure Vessel</li><li>Stability Analyses of the Three Gorges Dam Foundation against Sliding by Strength Reduction of Finite Elements</li><li>Second-Order Elasto-Plastic Analysis of Frames by Differential Quadrature Element Method</li><li>Reliability Analysis for Effects of Reservoir Water Level Change on Embankment Dam</li><li>Pattern Shifting Analyses of Micro-Structures of IC Package</li><li>Analysis of Hydrogen Diffusion in Notched High-Strength Steel Wires</li><li>Study on Calculation Method of Press Straightening Stroke Based on Straightening Process Model</li><li>Stress Testing of Individual Steel Strands in a Multiple-Cable Single Borehole Anchorage for Geotechnical Engineering</li><li>Geometrical Similarity of Thermo-Structural Problems</li><li>The Production and Performance Estimation of Dunnage for Transportation of a Steel Roll Coil</li><li>The Effect of Temperature Variations on Cycle Time Using an Optimized Cooling Design and a Temperature Control System</li><li>Stress Analysis of Cold Die Compaction with Rotating Tools for Aluminum Powder</li><li>Analysis of Cavity Tool Stresses in Channel Angular Extrusion</li><li>Nonlinear Analysis of R/C Frame under Static and Cyclic Loadings</li><li>Failure Mode Analysis for Column over Designed Ductile Frames</li><li>Quasi-Static and Dynamic Axial Crushing of Various Polygonal Tubes</li><li>Basic and Optimum Column Over-Design Factor Avoiding Story Mechanism for Frame Structures</li><li>The Occurrence Limit of Strain Nonuniformity in Thin-Walled Cylinders Subjected to Cyclic Torsion</li><li>Superplastic Properties and Microstructure of Friction Stir Welded Joints of Zn-22wt.%Al Alloy</li><li>Residual Stresses in TIG-Welded I-Beams. Experimental Test-Setup and Validation of Numerical Model</li><li>Assessing the Flaws in Welded Seam of Header of a 300MW Steam Turbine Generator Unit</li><li>Multi Stage Seaming Process for Large Tubular Mechanical Bonded Structure</li><li>Effect of Dimensional Tolerance on Displacements and Stresses of Wedged-Ring Joint Structure</li><li>A Study on Friction Stir Process of Magnesium Alloy AZ31 Sheet</li><li>Reduction of Residual Stress of Welded Joint Using Local Plasticity Caused by Ultrasonic Vibration</li><li>Finite Element Simulation of Self-Piercing Riveting of Three Aluminium Alloy Sheets</li><li>Self Loosening Behavior of Metal Thread Joints under Transverse Cyclic Loading</li><li>Formability of Friction Stir Welded and Arc Welded 5083 Aluminum Alloy Sheets</li><li>Effects of Loading Speed and Shear Prestrain on Adhesive Fatigue Strength in Single-Lap Joint</li><li>Viscoplastic Behavior of Acrylic Adhesive in Butt-Joint at Various Temperatures under Complex Loading : Experimentation and Modelling</li></ul>