Diffusion in Solids and Liquids V

Preface
Committees
Surface Properties of 316L Austenitic Steel Improved by Simultaneous Diffusion of Titanium and Aluminium
Study of the Reactive Diffusion in the Presence of Dissolution of Copper in the Solder Melts
Empirical Expression for Estimation of Thermal Characteristics of Materials Used for Thermal Protection
The Study of Droplet Impact Behavior on Flat Surface with Different Surface Properties
Synthesis and Characterization of Ag Doped Hydroxylapatite via the Decomposition of EDTA Chelate
Thermo-Mechanical Materials Analysis
Desorption of Hydrogen from CeNi3 Intermetallic Hydrides
Glycolic Acid Ethoxylate 4-Tert-Butylphenyl Ether as Drag Reducing Agent in Aqueous Media Flow
Heat Diffusion in Solidifying Alumina Splat Deposited on Solid Substrate under Plasma Sprayed Conditions: Application to Coating Formation

In Situ Synthesis of B4C / TiB2 Composites from Low Cost Sugar Based Precursor
Investigation of Dynamic Recrystallization in an Al-Li-Cu-Zr(-Mg) Alloy
Microstructural Study of a High Bainite Dual Phase (HBDP) Steel Austempered at Different Temperatures
Pre-Aging and Maturing Effects on the Precipitation Hardening of an Al-Mg-Si Alloy
Peculiarities of the Electron-Phonon Interaction in Graphite Containing Metallic Intercalated Layers
Ion Nitriding of CoCrMo Alloys
Effect of Heat Treatments on the Structural and Mechanical Properties of Ti Thin Films Deposited on Steel Substrates by PVD Method
Characterization of Titanium Carbides Coatings Using X-Ray Microanalysis in Scanning Electron Microscopy
Numerical Simulation Study for the Effect of the Strength and the Direction of a Static Magnetic Field on the Transient Double-Diffusive Flow in Liquid Phase during an Alloy Solidification
Mathematical Modeling of Squeeze Casting of Magnesium Alloy AM50
A Kinetic Model for Dissolution of Second Phases in Die-Cast Mg Alloy AM50
Simultaneous Wicking-Convection Heat Transfer Process with Non-Newtonian Power-Law Fluid
Effect of Annealing on Nanocrystalline Structure of Nb3Sn Diffusion Layers in Composites with Internal Tin Sources
Hydrogen-Induced Enhancement of Atomic Diffusion in Metals
Anisotropy of Boride Layers: Effect on the Mechanical Properties of AISI 4140 Borided Steels
The Effect of Alloying Elements on the Stability of Centerline Segregation
A Lattice Monte Carlo Analysis of Thermal Transport in Phase Change Materials
Ultra Rapid Sintering of Ceramics
Overview and Functional Characterization of Pb-Free Solders
Heat and Mass Transfer for a Constant Heat Boundary in Porous Reactive Medium under Local Non Equilibrium Conditions
Models for the Porosity Growth and Dissolution in Single-Crystal Nickel-Base Superalloys
Molecular Dynamics Calculation of Hydrogen and Iron Diffusion in Molten Tantalum under an Electric Field
Thermosolutal Convection in a Partly Multi-Layred Porous Annular Cavity
Defects Removal Using a Triangular-Shape Designed Tool
Proposed Model of Water Adsorption/Desorption in a PEM Membrane
Enhanced Mechanical Properties of Stainless Steel 316 L via Friction Stir Processing
Influence of Friction Stir Processing Parameters on the Fabrication of SiC/316L Surface Composite
Surface Roughness and Initial Pressure Effect on Superplastically Carburized Duplex Stainless Steel
Effects of Processing Factors on Microstructure and Diffusivity of Diethylbenzene Dehydrogenation Catalyst
Liquid Diffusion in Polymers by Electrochemical-Impedance Spectroscopy (EIS)
Diffusion in Materials by Atomic-Scale Modeling: Exploiting the Predictive Power of Classical and First-Principles Molecular Dynamics
Numerical Study of a Vertical Solidification Process under Magnetic Field in Unsteady State
Metallographic and Numerical Studies of the Role of Catalyst Particles of MgH2-Mg System
An Approach for Analyzing the Growth Kinetics of Fe2B Phase on AISI 1018 Steel
Reactive Diffusion of Uranium in Compacted Clay: Evaluation of Diffusion Coefficients by a Kinetic Approach
A Coupled Model of Two-Phase Diffusion and Flow through Deforming Porous Cosserat Media
Dependence between the Boron Surface Concentration and the Growth Kinetics of Boride Layers in AISI 4140 Steels
Diffusion in Electrodes Used for Resistance Spot Welding of Galvannealed Steel
Kinetic Monte Carlo (KMC) Simulation of GaAs (001) ?2 (2x4) Reconstructed Surface and Characterization
Effects of Nickel on Interface Morphology during Oxidation of Fe-Cu-Ni Alloys
Thermal Properties and Crystallization Behavior of Co67Fe4Cr7Si8B14 Amorphous Alloy
Effect of Homogenization Time and Cooling Rate on Martensitic Transformations in Ti-57.5%wtNi Alloy
The Effects of Homogenization Time and Cooling Environment on Microstructure and Transformation Temperatures of Ni-42.5wt%Ti-7.5wt%Cu Alloy
The Consideration of Splendid Increasing Trend of Green Fuel H2 Production with the Help of Nanofine Materials
Analysis of the Recrystallization of Cold-Rolled Copper after Isothermal Annealing Using Electron Backscattered Diffraction Patterns
Mechanical Performance of the Annealed NiTi Shape Memory Alloy Coating onto 316L Stainless Bio-Steel
Characterization of the Intermetallic Compounds Formed during Hot Dipping of Electrical Steel in a Hypo-Eutectic Al-Si Bath
Phase-Field Simulation on Coarsening of the ?'Phase Particles in Ni-Based Superalloys Considering Elastic Inhomogeneity
Diffusion of Ti, V and Nb in Ni3Al at Elevated Temperatures
Effect of Lubricant Volume and Working Gap on the Surface Roughness and Material Removal Rate in Magnetic Abrasive Finishing
Air Characteristics in Air Turbine Spindle of Ultra Precision Machines
Magnetic Assisted Abrasion, a New Method for Nano Level Surface Finishing
Fluid Flow in Tree-Shaped Constructal Networks: Porosity, Permeability and Inertial Parameter
Unifying Theory for Natural and Man-Made Flow Systems: an Application to Design of Porous Material for Particulate Control
Water Vapor Permeability of Clay Nanocomposites Based on Amorphous PET
Heat Transfer Enhancement of Jet Impingement on a Flat Plate Attached by a Porous Medium with a Center Cavity
Analysis of Component Depth Profiles at the Interface of Ti6242 Alloy and SiC, SiN Coatings after High Temperature Oxidation in Air
Embrittlement of Cu and Cu-Based Alloys by Bi and Bi2Te3
Optical and Mechanical Properties of Aluminum Film Deposited on Glass Substrate
The Effect of Matrix Stiffness on the Mechanical Properties of the Composite Reinforced with Multi-Wall Carbon Nanotube
Numerical Simulation of Natural Convection in a Mold
Interdiffusion Studies in the Co- Mo System
Study on the Growth of Nb3Sn Superconductor in Cu(Sn)/Nb Diffusion Couple
Formation of the Modulated Structure in a Steel by the Addition of a Strong Carbide Forming Element
Diffusion Studies in A3B Compounds with A15 Structure
Evaluations of Hydrogen Permeation on Al2O3-CuO-ZnO-Based Cobalt Composite Membrane
Study on Homogenization Time and Cooling Rate on Microstructure and Hardness of Ni-42.5wt%Ti-3wt%Cu Alloy
Fe Ions Diffusion and Oxygen Complexes Evolution during Thermodonors Annealing in B-Doped Czochralsky Silicon Crystal
Computer Simulation Model for First-Order Phase Transition Fluctuation Stage
Drying of Kaolin Clay Cylinders: Dynamic Neutron Radiography Studies
Numerical Studies of the Diffusion Processes and First Step Oxidation in Nickel-Oxygen Systems by Variable Charge Molecular Dynamics
Internal Interface Strains Effects on UO2/U3O7 Oxidation Behaviour
New Photothermal Deflection Method to Determine Thermal Properties of Bulk Semiconductors
Investigation of Optical and Thermo-Electrical Properties of SnSb2S4 Thin Layers Using the Photothermal Deflection Technique
Investigation of Thermal Properties of Thin Semiconductor Layers Deposited on a Glass Substrate by the Photothermal Deflection Technique
The Effect of Pressure on the Phase Transition of Pd3Cu Alloy
Evaluations of Hydrogen Permeation on TiN-20wt.%Co Membrane by Hot Press Sintering
Influences of Dye Doping and Hole Blocking Layer Insertion on OLED Performance
Efficiency Improvement of Organic Light Emitting Diodes with Co-Deposited Hole Blocking Layer
Intermetallic Growth: Structure-Sensitive Effects
The Kinetics of Gas Nitrided Layer Growth on Austenitic Stainless Steel
Microstructure and Properties of Nanoclay Reinforced Asphalt Binders
Effect of a Shield on Mixed Convection in a Rectangular Enclosure with Moving Cold Sidewalls and a Heat Source on the Bottom Wall
The Effect of Traveling and Rotation Speeds on Mechanical Properties during Friction Stir Welding of Dissimilar Al Alloys
The Investigation on Optimum Corrosion Protection Potential of STS 316L in Seawater
Phase Formation in FeOx-SiO2-Cu2O-ZnO-FeS System during Melts Crystallization
Heat Treatment Analysis of Large Al-Cu-Mg-Si Alloy Extrusion
A Contribution to the Analysis of the Thermo-Hydrodynamic Lubrication of Porous Self-Lubricating Journal Bearings
Measurement of Mass Diffusion Coefficient of Multi-Component System in Aqueous Media by Phase Shifting Interferometer
Diffusion of Hydrogen in Single Crystals of Monoclinic-ZrO2 and Yttrium Stabilized Cubic Zirconia
Notices on Method of Thickness Evaluation of TiN Layers on Magnesium Alloys
Numerical Simulation of Heat Losses between a Partition Plate and the Wall of the Head of a Plastic Heat Exchanger
Anti-Sticking Properties of PVD CrWNx, CrOx and ZrOx Coatings on Medical Electrode Application
Diffusion Kinetics of BSA Protein in Stimuli Responsive Hydrogels
Finite Volume Methods with Multi-Point Flux Approximation with Unstructured Grids for Diffusion Problems
Heat and Mass Transfers and their Mutual Effects in Membrane Processes
An Improved Method for Evaluating the Moisture Diffusivity in a Membrane
Silicon Dioxide as a Boundary for Oxygen Outdiffusion from CZ-Si
Cu Ti Formation in Nb Ti/Cu Superconducting Strand Monitored by In Situ Techniques
Structural Relaxation Process by Addition of B in CuHfTi Amorphous Alloys
Heat Transfer in Black Holes
Hydrogen Diffusivity and Solubility in Internally Oxidized Pd0.97Zr0.03 and Pd0.97Nb0.03 Alloys
Hydrogen Diffusivity and Hydride Formation in Rich-Zirconium Alloys Used in Nuclear Reactors
Three-Dimensional Study of Heat and Mass Transfer in a Partially Porous Elongated Cavity
Effects of the Microstructure on the Hydrogen Diffusivity in Ni-Based Superalloy 718
Modeling of Turbulent Flow and Heat Transfer in Graphitic Foams
Hydrogen Absorption/Desorption in Nanostructured Fe- and Ti-Doped Mg2Ni Alloys
Surface Microstructure Evolution during Phase Transformation on Mn, Al and Si Alloyed Ultra Low Carbon Steel
A Study of Photocatalyst of the TiO2 Thin Film with Acid Dispersed CNT for Dye-Sensitized Solar Cell
Diffusion in Al-Ni and Al-NiCr Interfaces at Moderate Temperatures
A High Order Time Advancement Scheme for Prediction of Solidification Processes
Experimental and Analytical Investigation of Ammonia Absorption into Ammonia-Water Solution: Estimated Interface Concentration
Performance Characteristics of Capacity Control of Industrial Water Cooler Using Pulse Modulation Valves
Reaction Diffusion in Pb Free Solder-Cu System
Numerical Analysis of Heat and Mass Transfer in an Annular Porous Adsorber for Solar Cooling System
Investigation of the Interfacial Reaction between Optical Glasses and Various Protective Films and Mold Materials
A Study of Porosity Influence on Thermal Diffusivity of Aluminium Foam by Experimental Analysis and Numerical Simulation
Thermal Conductivity and Thermal Expansion of Copper Matrix Composites Reinforced with High Modulus C Fibres
Microsegregation Induced Inhomogeneity of Coarsening of ?' Precipitates in a Nickel-Based Single Crystal Superalloy
Statistical Eulerian Diffusion Approach of Four-Way-Coupled Multiphase Systems
Theoretical Investigation of the Relation between the Output of a Methane Internal Reforming SOFC and the Composition of the Feedstream
Thermal Expansion of Advanced Materials for High Temperature Fusion Application
Atomic Contribution to Valence Band Density of States in Gallium Oxide and Silicon Oxide Nano Layered Films
Microstructure and Hydrogenation Property of Mg-6.7 mol% Ni Alloy
Depth Resolved and Elemental Selective XRF and XAS in Surface Layer of Annealed Fe-Cr Alloys
Depth Resolved XRF and XAS for Enrichment and Oxidation of Mn on Surface of Annealed Fe-Mn Alloys
The Effect of TaN Interlayer on the Performance of Pt-Ir Protective Coatings in Glass Molding Process
Thermal Stability of Al2O3 Coated Low Transition Temperature Glass
Presentation of a New Method for Determination of Diffusion Coefficients of Gaseous Pollutants in Cladding Wall Materials Indoors
Macroporous Silicon Electrochemical Etching for Gas Diffusion Layers Applications: Effect of Processing Temperature
Thermal Diffusivity of Traditional and Innovative Sheet Steels
Electroless Ni-P Composites with ZrO2: Preparation, Characterization, Thermal Treatment
Improvement of the Electrochemical Properties in Nano-Sized Al2O3 and AlF3-Coated LiFePO4 Cathode Materials
Characterization of Electrolytically Deposited CdSe on Ti Substrates
The Effect of Al2O3 and Li2O on the Anatase to Rutile Phase Transformation
Effect of the Separating Distance of Twin Buildings on the Generated Flow Structure
Pulse Electrolysis for the Production of Hard Ni/TiO2-ZrO2 Composite Coatings
Dispersion of Twin Inclined Fume Jets of Variable Temperature within a Crossflow
Effect of Processing Parameters on the Structural and Mechanical Properties of Micro Arc Oxidized Aluminium Alloy
Numerical Determination of Intrinsic Diffusion in Fe-Cr-Al Systems
Numerical Simulations on the Growth of Thin Oxide Films on Aluminum Substrates
Conjugate Heat and Mass Transfer in Metal Foams: A Numerical Study for Heat Exchangers Design
Oxygen Diffusion and Electrical Conductivity Measurements in Uranium Dioxide
Reaction-Assisted Diffusion Bonding of Advanced Materials
Simultaneous Measurements of Lattice and Grain Boundary Diffusion Coefficients via 2-Dimensional Simulations
Molecular Dynamics Simulation of the Buckling Behavior of Boron Nitride Nanotubes under Uniaxial Compressive Loading
Heat Transfer of Mineral-Filled Polypropylene Foams
Thermal Conductivity of Carbon Nanofibre-Polypropylene Composite Foams
The Role of Diffusion Accommodation and Phase Boundary Wetting in the Deformation Behaviour of Ultrafine Grained Sn-Pb Eutectic
Three-Dimensional Double Diffusion Mixed Convection in Rectangular Channel Filled with Porous Medium
Collapse-Type Shrinkage's Characteristics in Both Eucalyptus urophylla and E.cloeziana Wood under Heat-Treatment Conditions
Study on Collapse-Shrinkage Characteristics in Plantation-Grown Eucalyptus Wood under Continuous and Intermittent Drying Regimes
Characterization of Hard Coatings Modified with Nitrogen Implantation
Hot-Extruded Microstructure and Mechanical Properties of Mg-Al-Sn Alloys
Al-Si-Fe Intermetallics on Fe-Substrates during Hot-Dipping
Galvanized Coatings Produced in a Hot Dip Simulator (HDS)
Comparison of Functional Properties of Thin Layers on Titanium and Cobalt Implant Alloys
Corrosion Resistance of Porous 316L Implant Steel
Diffusion in MC Carbides in High-Speed Steels during High-Temperature Treatments
Diffusion and Secondary Carbide Precipitation in High-Speed Steels
Influence on Olive Leaves (Olea Europaea, var. Serrana) Antioxidant Extraction Kinetics of Ultrasound Assisted Drying
Ultrasound Effects on the Mass Transfer Processes during Drying Kinetic of Olive Leaves (Olea Europea, var. Serrana)
Alloying Effects on the Hydrogen Diffusivity during Hydrogen Permeation through Nb-Based Hydrogen Permeable Membranes
Automated Burner and Biogas Register for Sewage Treatment Mini Stations
Complex Change in Superficial Layer Properties of Specimen Obtained by Metallurgical Powder under Vibration Process Method
A New Modified Austempering to Increase Strength and Ductility Simultaneously for UHS Steels
Ultra Fine Grain via Friction Stir Processing of 7075-T6 Grade Aluminum Alloy
Effects of Load and Sliding Speed on Tribological Behavior of Plasma Sprayed Bronze-Alumina Coatings
Predicting Behavior of Plasma Nitrided Ni+Al Composite Coating Using an Artificial Neural Network Model
Evolution of Interdiffused Gaussian-Shape Nanolayer in Au-Si(111) System at Ambient Condition
Synthesis and Characterization of Gd2O3 Doped CeO2 Nanopowders by a Glycothermal Process
Analysis of Cryogenic Refrigeration Cycle Using Two Stage Intercooler
Kinetics of Isothermal Phase Transformations by Phase-Field Simulations: An Analogy between the Peritectic and Monotectic Systems
Evaluation of the Corrosion Behavior of the Laser Gas Nitrided Ti-6Al-4V
Film Formation via Plasma Electrolyte Oxidation of Ti and Ti-5Mo-4V-3Al Alloy in High Alkaline Solutions
Structural Stability of Composite Materials Prepared by Explosion Welding after their Heat Treatment
Study of Explosion Welding of Mg Alloy with Aluminium
Comparative Tribological Behavior of V(N,C) and VC Diffusion Coatings
Characterization of Thermal Contact Resistance in Metal Micro-Textured Thermal Interface Materials Using Electrical Contact Resistance Measurements
Decreasing the Fouling of Heat Exchanger Plates Using Air Bubbles
The Simulation of Heat and Vapour Transfer Trough Fibrous Materials
Numerical Prediction of the Effective Thermal Conductivity of Open- and Closed-Cell Foam Structures
The Nature of the Vacancy-Wind Effect Occurring in Diffusion via Six-Jump-Cycles in B2 Intermetallics
Parametric Analysis of the Classification of Harrison Kinetics Regimes in Grain Boundary Diffusion
Study of Moisture Buffering in Building Materials with Application of Sorption Kinetics Models
Experimental and Analytical Study of Contaminant Transport Resulting from Dissolution of a Flat Surface Buried in a Packed Bed
Experimental Values of Solubility of Organic Compounds in Water for a Wide Range of Temperature Values ? A New Experimental Technique
A Mathematical Model to Predict Moisture Uptake of Dry Products Packaged Individually in Flexible Films
Modelling Moisture Uptake by Binary Mixtures of Products Packaged in Polymeric Films
Effects of Milling Time and Impact Force on the Mutual Diffusion of Cu and Fe during Synthesis of Nanostructured Fe-50%Cu Alloy via Mechanical Alloying Process
Diffusion at Short Circuits: State of the Art
Properties and Characterization of Hard Coatings Obtained by Boriding: An Overview
Mathematical Model of Forecasting the Coke Quality Indicators
Influence of Elements Oxides Microadditives with Major Cationic Radius on Properties of Silicate Bundle
Isotope Exchange of Gaseous Oxygen with Oxide LaMno3+? Nanograins Boundary
Structural Phase Transitions in Mechanoactivated Manganese Oxides
Structure and Thermal Stability of Cu after Severe Plastic Deformation
Site Preference and Diffusion in Ni3Al Alloyed with Ir, Ta or Re at 1200 degreesC
Determination of Average Ternary Interdiffusion Coefficients Using Moments of Interdiffusion Flux and Concentration Profiles
Effects of Combined Surface Modification on Adhesion Strength of CrN Coatings for STS420
Diffusion in SC Ni-Base Superalloy under Viscoplastic Deformation
Diffusion Phenomena of the Oxygen and Nitrogen in Niobium by Mechanical Spectroscopy
Effect of Reactive Elements and Microstructure of Steel on High Temperature Oxidation Behaviour of Ferritic Stainless Steels
On the Grain-Boundary Diffusion in Polycrystalline Materials and Thin Films
Composition and Pressure Dependence of the Diffusion Coefficients in Binary Liquid Alloys
Diffusion in Binary Silicides of Iron and Molybdenum
Air Oxidation Behaviour of a Ti-6Al-7Nb Alloy
The Effect of Oxidation on The Structure and Hardness of (Zr, Hf)N Coatings
Molecular Dynamics Calculations of InSb Thermal Conductivity
The Influence of Stress on Interstitial Diffusion - Carbon Diffusion Data in Austenite Revisited
A Mathematical Model for the Estimation of the Energetic Potential for Several Renewable Energy Sources: Application on the Design of a Modern Power Plant
On the Significance of Flow Regime for the Heat Transfer in Solid Oxide Fuel Cells
Diffusion and Reaction in Hierarchical Structured Metal Oxides - A Transient TAP Study
Natural Convection in Vertical Channels with Porous Media and Adiabatic Extensions
Numerical Investigation on Transient Conjugate Optical-Thermal Fields in Thin Films Irradiated by Moving Sources for Front Treatments
Effect of Solid Thickness on Transient Heat Conduction in Workpieces Irradiated by a Moving Heat Source
Selected Analyses and Observations in Multicomponent Diffusion
Bi-Velocity Method and Linear Nonreversible Thermodynamics, Interdiffusion in R2
Molecular Ion Channels; Electrodiffusion in R3
Investigation of a Mathematical Model of High-Temperature Diffusion Controlled Heterogeneous Reaction between Metal and Oxide Melts
Anomalous Diffusion Coefficients for W(IV) Ion Diffusion in NaCl-KCl Melt at 700-750 degreesC
A Limited Condition for Bifurcate or Trifurcate Kirkendall Planes in Multiple Phase Diffusion Couples
Comparison of Four Thermo-Mechanical Models for Simulating Reactive Flow in Porous Materials