Recent Progress on Mass Transport Related Processes in Engineering Materials
Published on 30. April 2020
Book
Paperback/Softback
212 pages
978-3-0357-1546-0 (ISBN)
Description
Research on mass and thermal transport in engineering materials continues to be a rapidly expanding major area of materials science and engineering. It is an exciting area. It is clear that gaining an in-depth understanding of mass and thermal transport underpins the major breakthroughs needed in the development of new materials for new technologies and the improvement of existing materials in service. This topical volume, which is entitled "Recent Progress in Mass Transport in Engineering Materials", was designed to capture a very wide and significant cross section of contemporary international research on mass and thermal transport. It ranges from basic strategic research through to quite applied areas. This volume spans, for example, the modelling of multiphase fluid flow in porous media for enhanced oil recovery to heat transfer in fixed bed reactors, from the modelling of the drying processes to the growing of indium oxide thin films. We thank the authors for their participation in this volume and the reviewers for their time and efforts.
More details
Series
Language
English
Place of publication
Zurich
Switzerland
Target group
Professional and scholarly
Illustrations
Illustrations
Dimensions
Height: 240 mm
Width: 170 mm
Thickness: 11 mm
Weight
500 gr
ISBN-13
978-3-0357-1546-0 (9783035715460)
DOI
10.4028/b-nd9CaZ
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Andreas Öchsner | Graeme Murch | Ali Shokuhfar
Recent Progress on Mass Transport Related Processes in Engineering Materials
Software
approx. 04/2020
Trans Tech Publications Ltd
€234.06
Not yet published
Andreas OEchsner | Graeme Murch | Ali Shokuhfar
Recent Progress on Mass Transport Related Processes in Engineering Materials
E-Book
03/2020
Trans Tech Publications Ltd
€211.86
Available for download
Content
Preface
Chapter 1: Modeling
Modelling Mass Transference and Two-Directions Diffusion Coefficients in an Ellipse-Shaped Body under Multi-Factor and Un-Steady Conditions
Effect of Alloy Elements in Time Temperature Transformation Diagrams of Railway Wheels
Design and Fabrication of the Bidirectional Micro-Optic Concentrator for Optical Radiation
Water Absorption Curves versus Gamma-Ray Attenuation Profiles: A Comparative Analysis of Hygric Permeance Results
Transport Modelling of Multi-Phase Fluid Flow in Porous Media for Enhanced Oil Recovery
Heat Transfer in Fixed Bed Elliptic Cylindrical Reactor via Two-Phase Model
On the Modeling of Drying Process in an Industrial Tunnel Dryer
Chapter 2: Steels and Cast Irons
Development of the Chromium-Rich High-Speed Steel: As-Cast Microstructure
Tribological Behavior of a Self-Lubricant Surface Film of H3BO3 Formed on a Borided Biomedical Steel by a Post-Treatment
The Influence of H2SO4- NaCl Electrolyte Composition to the Electrochemical Noise Behaviour of a High-Alloy Cast Steel
Plasma-Texturing Surface Treatment of Grey Cast Iron for Friction Reduction
Prediction of Shortening and Material Grain Size after Extrusion Using the ECAP Method
Chapter 3: Polymers and Composites
Diffusion and Solubility of Common Microelectronic Airborne Molecular Contaminants into PEI Thin Polymer Membranes and its Related Contamination Control Applications
Mechanical Gypsum Wall System Performance
Resin Radial and Isothermal Infiltration in Fibrous Media: A New Mathematical Formulation
Applying Phenomenological Lumped Models in Drying Process of Hollow Ceramic Materials
X-Band Electromagnetic Characterization of Fe72Al23V5 Based Nanocomposites
Flexible Poly(imide) Siloxane Block Copolymers to Use at Biomedical Products
Chapter 4: Ionic Compounds
Effect of Catalyst Synthesis Parameters on the Performance of CO2 Hydrogenation to Methanol over SBA-15 Supported Cu/ZnO-Based Catalysts
Grain Structure and Electrical Properties of Transparent Indium Oxide Thin Films Prepared by RF Magnetron Sputtering
Features of the Reducibility of Titanomagnetite Iron Ore Materials
Structure Sensitive Properties of System B2O3- CaO Melts
Effect of Gradient Layer of TiO2- HA on Properties of the Ha Coated Ti-6Al-4V
Chapter 1: Modeling
Modelling Mass Transference and Two-Directions Diffusion Coefficients in an Ellipse-Shaped Body under Multi-Factor and Un-Steady Conditions
Effect of Alloy Elements in Time Temperature Transformation Diagrams of Railway Wheels
Design and Fabrication of the Bidirectional Micro-Optic Concentrator for Optical Radiation
Water Absorption Curves versus Gamma-Ray Attenuation Profiles: A Comparative Analysis of Hygric Permeance Results
Transport Modelling of Multi-Phase Fluid Flow in Porous Media for Enhanced Oil Recovery
Heat Transfer in Fixed Bed Elliptic Cylindrical Reactor via Two-Phase Model
On the Modeling of Drying Process in an Industrial Tunnel Dryer
Chapter 2: Steels and Cast Irons
Development of the Chromium-Rich High-Speed Steel: As-Cast Microstructure
Tribological Behavior of a Self-Lubricant Surface Film of H3BO3 Formed on a Borided Biomedical Steel by a Post-Treatment
The Influence of H2SO4- NaCl Electrolyte Composition to the Electrochemical Noise Behaviour of a High-Alloy Cast Steel
Plasma-Texturing Surface Treatment of Grey Cast Iron for Friction Reduction
Prediction of Shortening and Material Grain Size after Extrusion Using the ECAP Method
Chapter 3: Polymers and Composites
Diffusion and Solubility of Common Microelectronic Airborne Molecular Contaminants into PEI Thin Polymer Membranes and its Related Contamination Control Applications
Mechanical Gypsum Wall System Performance
Resin Radial and Isothermal Infiltration in Fibrous Media: A New Mathematical Formulation
Applying Phenomenological Lumped Models in Drying Process of Hollow Ceramic Materials
X-Band Electromagnetic Characterization of Fe72Al23V5 Based Nanocomposites
Flexible Poly(imide) Siloxane Block Copolymers to Use at Biomedical Products
Chapter 4: Ionic Compounds
Effect of Catalyst Synthesis Parameters on the Performance of CO2 Hydrogenation to Methanol over SBA-15 Supported Cu/ZnO-Based Catalysts
Grain Structure and Electrical Properties of Transparent Indium Oxide Thin Films Prepared by RF Magnetron Sputtering
Features of the Reducibility of Titanomagnetite Iron Ore Materials
Structure Sensitive Properties of System B2O3- CaO Melts
Effect of Gradient Layer of TiO2- HA on Properties of the Ha Coated Ti-6Al-4V