The Science of Engineering Ceramics II

Fracture and Deformation Damage Accumulation in Tough Ceramics
New Perspectives in Engine Applications of Engineering Ceramics
Instability of Solid-Liquid Interfaces in Ceramic Materials
Rheology of Grain-Boundary Sliding and Grain Interlocking at High Temperatures
Study of Crystallographic Orientation of in situ ?-Si3N4 Composite by Electron Back Scattered Diffraction (EBSD) Method
Design of Ceramic Microstructures by the Monte Carlo Simulations
Sintering of Al2O3-ZrO2 Composites Using Millimeter-Wave Radiation
Millimeter-Wave Sintering of Si3N4
Fabrication Process and Mechanical Properties of ZnO Based Nanocomposites by Pulse Electric Current Sintering Method
In-situ Microstructural Control in Engineering Ceramics
Transient Liquid Phase Sintering of Silicon Nitride by Hafnia Addition
In-situ Synthesis of Si3N4/SiC Composites by Reactive Hot-Pressing from Elemental Powders
Estraction Sintering - A New Route to Non-Oxide Compostie Ceramics
Novel Processing Routes to Ceramic Compostes Developed in Poland
New Carbide Composites with Extraordinary Properties
Pressure Controlled Slip Casting of Fine Ceramics
Combustion Synthesis of Gamma-Lithium Aluminate
Formation of SiC-AIN Solid Solution by Combustion Nitridation of Al with SiC
Microstructure and Properties of Net Shape Chromium Carbide-Copper Composites
Al2O3/Al-Si Composites Formed by Reactive Penetration
Engineering Ceramics from Preceramic Polymers
Thermodynamics and Stability of Polymer-Dervied Materials
Corrosion Stability and Mechanical Properties of Polysilazane-Derived SiCN-Ceramics
Sol-Gel-Dervied Titania with Gradient Porosity
Divorced Eutectic Precipitation in Isothermally Solidified Spinel-YAG Composite with Off-Eutectic Composition
Phase Transformation of Transition-Alumina upon Hastened Sintering
Composites Alumina - Silicon Carbide Obtained in Low Temperature by using Phosphate Glass Sealing
Direct Nitridation of Aluminum Compacts at Low Temperature High Nitrogen Pressure
Thermochemical Study of Adsorption Behaviour of Polyacrylic Acid on Alumina Powder Surface
Grain Boundary Chemistry and Creep Resistance of Oxide Ceramics
Structural Flaw Evaluation in Green Compacts and Ceramics by an Optical Method - For Understanding the Origin of Strength Variation in Ceramics -
Microstructural Optimization of Alumina Prepared from Ultrafine Theta-Phase Powder for High Strength Applications
A New Ceramic Eutectic Composite with High Strength at High Temperatures
Fabrication and Mechanical Properties of Al2O3 Solid Solution with Low Addition of Cr2O3
Microstructure and Characteristic of Alumina with Addition of Small Amount of YAG
Metastable Precipitation of YAIO3 in Isothermally Solidified YAG-Spinel Eutectic Composite with YAG-Rich Composition
A Manufacturing Process of ZrO2-Ca from ZrSiO4 under a Reduction Environmental Condition
Effect of Y2O3 on Sintering and Microstructure of Hydroxyapatite
Fabrication and Mechanical Properties of LaNbO4 and LaNbO4/Al2O3 Composites
Effect of TiO2 on the Mechanical Properties of the K2O-MgO-SiO2-CaF2 Glass-Ceramics
Preparation of SiC and Si3N4 Powders by Ammono Sol-Gel Processing
The Effect of Microstructure on Fracture Toughness for Silicon Nitride Ceramics
The Facing Challenges of Silicon Nitride
Effects of Raw Powders on Microstructure and Properties of Si3N4-Based Ceramics
Microstructure Control of Silicon Nitride Ceramics Fabricated from ?-Powder Containing Fine ?-Nuclei
The Relationship between Thermal Conductivity and Microstructure in Si3N4 Ceramics
Thermodynamic and Microstructural Studies of Coloration and Decoloration Processes during Gas-Pressure Sintering of Silicon Nitride Ceramics
The Effect of Sintering Atmosphere on the Phase Composition and Strength of Silicon Nitride
Relationship between Microstructure and Mechanical Properties for Silicon Nitride Based Ceramics Fabriacted by PECS
Sub-Grain Boundary Formation in Si3N4 Based Ceramics
Corrosion Resistance of Silicon Nitride Ceramics
Characteristic of (Dy+Sm)-Sialon Ceramics
Fabriaction and Mechanical Properties of Fine-Grained Silicon Carbide Ceramics
Microstructure of Silicon Carbide with Yttrium-Aluminum Garnet and Silica
Influence of Particle Size and Sintering Parameters on the Resistivity of Reaction-Bonded Silicon Carbide
Effect of Heat-Treatment Atmosphere on Transfer of Alumina Additive in Silicon Carbide
Fabrication of Ceramics-Metal Composite by Pressure Infiltration of Metal to Porous Ceramics
Effects of YAG-Phase Amount on the Microstructure and Phase Transformation during the Liquid-Phase Sintering of ?-SiC
The Improvement in Mechanical Properties of MoSi2 through the Modification of Grain Boundary Phases
Mo(Si, Al)2-Based Materials Prepared by Reactive Infiltration of Aluminum into Porous MoSi2-Mo Preforms
Incorporation of ZrO2 into MoSi2 Porous Bodies by Chemical Vapour Infiltration
Mechanical Properties of TiC-Coated Graphite
Toughening Behavior in Ceramics and Cermets
The Correlation between Crack Extension Resistance and Microstructure in a Whisker-Reinforced Ceramic Composite
Oxidation Resistance of Silicon Carbide Whisker Reinforced Sialon Composites
Mechanical Properties of PSZ-Matrix Ceramic Composites Containing Al2O3 Particles of Various Sizes
Sintering of Alumina/Zirconia Composite Powders Prepared by the Coprecipitation Technique
The Effect of Alumina Addition on Phase Transformation and Mechanical Properties in Partially Stabilized Zirconia
Microstructure-Process-Property Realationship in Al/Al2O3 Composites Fabricated by Reaction between SiO2 and Molten Al
Composties for Use at High Temperatures
Mechanical and Tribological Properties of Hot-Pressed Si3N4-TiC Composites
?-Sialon-AIN-Polytypoid Composite Ceramics
The Influence of Various Size of AIN Starting Powders on the Mechanical Properties and Microstructure of SiC-AIN Composites
Composite Materials in the B-C-N-Ti System Formed by Reaction Coating
Toughening Alumina with Metallic and Zirconia Inclusions
Fabrication and Mechanical Properties of Al2O3/LaPO4 Composite
Processing and Properties of Oriented SiC Whisker-Reinforced Si3N4 Ceramic Matrix Composites
Mechanical Properties of in-situ Prepared SiC Whisker- and Nano Particle-Reinforced Si3N4
Mechanical Properties and Toughening Mechanisms of Si3N4 Matrix Laminated Ceramic Composite
The Potential of the Hydrolysis Assisted Solidification (HAS) Process for Wet Forming of Engineering Ceramics
Effects of Ceramic Particle Addition on the Thermal Contraction of Epoxy Materials at Cryogenic Temperature
Characterization of Interface and Grain Boundary in Si3N4/SiC Nanocomposites
SiC/Si3N4 Nanocomposites with Excellent High-Temperature Long-Term Behaviour
A New Route to the Fabrication of Si3N4/SiC Nanocomposite
Low Temperature Plasticity of Nanocrystalline Silicon Nitride Composite
Fracture Behavior of Ceramic Based Nanocomposites
Thermal Residual Micro-Stress Concentration and Strength of SiC-Alumina Nanocomposites
Fabrication and Mechanical Properties of Nano-SiC-Oxide Composites
Preparation and Sintering of SiC Particulate Dispersed Al2O3 Fine Powders by Spray Pyrolysis Method
Mechanical Properties of Intragranular Oxide Nano-Size Precipitates Reinforced Alumina Ceramics
The Preparation of Al2O3/Ni Nanocomposites by Pressureless Sintering
Mechanical Properties of 3Y-ZrO2/Ni Composites Prepared by Reductive Sintering
Fabrication of Dense ZrO2-Based Nano/Nano Type Composites by new Powder Preparation Method and Controlled Sintering Process
The Study of Carbon Nano-Composite Materials Based on Aerogel Skeletal
Fatigue-Free PZT-Based Nanocomposites
Recent Progress in the Synergy Ceramics Project
Computer Simulation for Estimation of Mechanical and Thermal Properties of AIN
Molecular Dynamics Simulation of Alumina Interfaces in Order to Design Advanced Materials
Microstructural Design of Grain Boundaries in Alumina Based Ceramics
Rate Equations for Sintering and Growth with Two-Sphere Model, Theory of Grain Coalescence
Interface Formation and Oxidation Behaviors of Silicon-Carbide-Based Layered Composites
Multiphase Composites of Silicon Carbide Obtained from Composite Particles
Seeded Silicon Nitride: Microstructure and Performance
Mechanical Properties of Si3N4/BN Composites by Chemical Processing
Development of New Processing Technology which Realizes in-situ Dispersion of Nano-Particles and Whiskers in Ceramic Matrix
Synthesis of Nanocomposite Ceramics for Magnetic Remote Sensing and Actuating
Transition Metal Dispersed Oxide Ceramic Nanocomposites with Multiple Functions
The Synthesis of Nano-Sized Metal Dispersed MgO Composites and Its Magnetic Properties
Structures and Magnetic Properties of Iron-Oxide/Silver Nanocomposite
Preparation of Stoichiometric Crystalline Li(Nb,Ti)O3 Solid Solutions by Sol-Gel Processing with Metal Alkoxides
28GHz Microwave Sintering for High Performance PZT-Based Nanocomposites
Ceramic Nanocomposites with Perovskite-Type Ferroelectric Dispersoid
Effects of Impurities on Dielectric Properties and Plasma Resistance of Al2O3 Ceramics for Application of Microwave Window
Study on Gelcasting Processing of High Power Rutile Capacitor
Novel Microstructural Design of Alumina Based Ceramics
Multi-Functional Ceramic Composites through Nanocomposite Technology
Design of Ceramics with Warm Feeling
Mechanical Properties of Rare-Earth Silicates / SiC Layered Composites
Fracture Behavior of Dense / Porous Multilayered Silicon Nitride
Atomic Interface Structure of Superplastic Ceramics
Microstructures and Mechanical Properties of Anisotropic Silicon Nitride Produced by Superplastic Deformation
The Role of Grain Boundary Stress in Multiphase Composed Ceramics
Crack Propagation in TZP Ceramics
Evaluation of Fracture Toughness Through the Modeling of Indentation Residual Stress Field and Crack Shape
Twist Anle Dependence of Interfacial Fracture Toughness of (0001) Twist Boundary of Alumina
Derivation of Crack Path in Particle-Dispersed Cearmic Composites by Finite Element Method
Determination of Fracture Aspects in Brittle Materials Using the Directional Fracture Approach
Non-Destructive Evaluation of Engineering Ceramics
Tribological Characterization in Ceramic Based Composite
Silicon Nitride Materials with Low Friction Coefficients
Plastic Deformation in the Sliding Wear Surfaces of Alumina at Various Temperatures
R-Curve Measurement Silicon Nitride Based Ceramics at Elevated Temperatures by SENB Method
In-situ Observations of Crack Bridging in a Self-Reinforced Alumina Ceramic
Micromechanics of Crack Bridging by Elongated Crystals in Self-Reinforced Ceramic Materials
High Temperature Deformation of AIN
Thermal Stability of Stacking Faults in Beta-SiC
Creep and Crack Growth of Zircon and Mullite Base Materials
Analysis of Porous Structure and Permeability Samples of Graphite-Containing Refractory Masses
Effect of Thermal Conductivity on Thermal Stress Generated in MgO-C Bricks for BOF (Basic Oxygen Furnace)
New Refractories from Ceramic Composite Concept
The Oxidation, Erosion and Some Mechanical Properties of ?'-Sialon at High Temperature
Processing and Structural Characterisation of Y2O3-ZrO2 Films Deposited Using Flame Assisted Vapour Deposition Technique
Recent Progress in Ceramic Joining
Relation of Internal Stress and Fracture Behavior of Symmetrically Graded Al2O3/TiC/Ni
Microstructure and Fracture Strength of TiN/Al and Al Alloys Interface
Verification of Creep Performance of a Ceramic Gas Turbine Blade
A Critical Appraisal of the Interfacial Toughness of Ceramic Matrix Composites Using Indentation Techniques
Some Characteristics of Sulphate Resisting Cement Immersed in Some Aggressive Solutions
Profiled Ceramic Micropackages for Microwave Application