Metal Forming 2014

Preface and Committees
Keynotes
Advanced In-Process Control System for Sheet Stamping and Tube Hydroforming Processes
Beta-Forging of Titanium Ti6Al4V Alloy Powders: Phase Evolution Modeling and Strain-Rate Relation
Chapter 1. Coatings and Surfaces
Advancement in Understanding of Descalability during High Pressure Descaling
Characteristics of Fluoride Based Conversion Coating Film on Al-Alloy for Metal Forming Applications
High Temperature Thermal Stability of Innovative Nanostructured Thin Coatings for Advanced Tooling
Identification of Defects of Stainless Steel Sold with Brand Names, by Studying their Surface Thin Films with Scanning Electron Microscope (SEM)
Motion-Controlled Precise Stamping for Microtexturing onto Aluminum Sheet
Prediction of Ridging by 3-Dimensional Texture in Ferritic Stainless Steels
Chapter 2. Extrusion and Drawing
A Multi-Objective Optimization of a Porthole Die Extrusion for Quality and Sustainability Issues
Bridge Design Influences on the Pressure Conditions in the Welding Chamber for Porthole Die Extrusion
Effects of Temperature and Cross Section Variations on the Vibrational Behavior of Finished Wire Blocks
Environmental Comparison between a Hot Extrusion Process and Conventional Machining Processes through a Life Cycle Assessment Approach
Investigation of the Mandrel's Stress States and Wear Conditions during Tube Hot Extrusion of IN690 Superalloy
Load Prediction for the Extrusion from Circular Billet to Symmetric and Asymmetric Polygons Using Linearly Converging Die Profiles
Method for Producing Twist Drills by Extrusion Using a Three-Slide Forging Press
Numerical Simulation of the Crystallographic Texture Evolution during Hot Extrusion of Oxides Dispersed Strengthened Steels
Effect of ECAE on Structure and Strength of Porous A6061 Alloy with Aligned Unidirectional Pores
The Effects of Non-Metallic Inclusion on Ductile Damage of High Carbon Steel Wire in Multi-Pass Dry Drawing Process
Chapter 3. Forging
An Experimental and Numerical Investigation into Forming Force Reduction in Precision Gear Forging
Effect of Hot Forging and Different Cooling Rates on the Microstructure, Mechanical Properties of Carbon Steel Containing 0.8 and 1.2Al
Estimation of Strain-Hardness Correlation in Cold-Forged Austenitic Stainless Steel
Forging of Parts Having Strength Distribution Using Tailor Friction-Welded Billets Composed of Steel Bars Having Different Quenchabilities
Friction in Hot Forging of Chrome Steel Covered with Oxide Scale Film Generated at Steam Atmosphere
Hot Spline Forming of Ultra-High Strength Steel Gear Drum Using Resistance Heating
Modelization and Validation of Ti-6Al-4V Alloy Material Constitutive Law for Isothermal Forging Process
New Method for Forming Brackets with a Triangular Rib
Optimization of Hot Press Forging Parameters in Direct Recycling of Aluminium Chip (AA 6061)
Sensitivity Analysis of Process Parameters for Developing an Improved Open Die Forging Process
Chapter 4. Formability
A Novel Experimental Design to Obtain Forming Limit Diagram of Aluminium Alloys for Solution Heat Treatment, Forming and In-Die Quenching Process
Characterization of UFG Microalloyed Steel Produced by Combined SPD Treatment
Effects of Anisotropic Yield Functions on Prediction of Forming Limit Diagram for AHS Steel
Evaluation and Validation of Methods to Determine Limit Strain States with Focus on Modeling Ductile Fracture
Experimental Investigation of Ti-6Al-4V with a Biaxial Tensile Test Setup at Elevated Temperature
Formability Improvement Technique for Heated Sheet Metal Forming by Partial Cooling
Formability of Magnesium Alloys AZ80 and ZE10
Fundamental Investigation for Tensile Test Using Conical Cupping Die
Investigation of a Bulge Test at High Temperatures and High Strain Rates Using a Finite-Element Simulation Study
Investigation of the Shape of a Cruciform Biaxial Tensile Specimen Intended for a Combination of Plane Strain Tensile States
Mechanical Response of Microalloyed Steel Subjected to Nonlinear Deformation
Study of Formability of Steel Thick Plates for Offshore Structures
Study on Hot-Working Behavior of High Carbon Steel / Low Carbon Steel Composite Material Using Processing Map
Theoretical and Experimental Investigation on Forming Limit for TNW700 Titanium Alloy
Effects of Nonconstant Strain Rate on Forming Limit and Efficiency in High Pressure Pneumatic Forming of Ti-Alloy Components
Forming Limit Analyses of 590 MPa High Strength Steel Sheet Using Differential Work Hardening Model
Formability Enhancement of Al-Mg Sheet by Using Hydro-Mechanical Forming
Chapter 5. Incremental Forming
Analysis into Differences between the Buckling in Single-Point and Two-Point Incremental Sheet Forming of Components for Self-Supporting Sheet Metal Structures
Comparative Study for Springback Prediction on Single Point Incremental Forming Process
Development of Tool Path Correction Algorithm in Incremental Sheet Forming
Effect of Difference of Tool Rotation Direction on Forming Limit in Friction Stir Incremental Forming
Experimental Study on the Incremental Forming of Coated Aluminum Alloy Sheets
Impact of High Speed Incremental Forming on Material Properties of AA6082 Sheets
Innovative Machine Design for Incremental Profile Forming
Single Point Incremental Sheet Forming of Polymer on Computer Numerically Controlled (CNC) Milling Machine Tool
Strain Analysis of Parts Produced by Multi-Pass Conventional Metal Spinning
High-Speed Single Point Incremental Forming of an Automotive Aluminium Alloy
Chapter 6. Joining and Bonding
A Cohesive Zone Model for Simulation of the Bonding and Debonding in Metallic Composite Structures - Experimental Validations
Adhesion Strength Study of Silicone Rubber Compounds to Nylon 66
Bending and Stamping Processes of FSWed Thin Sheets in AA1050 Alloy
Effect of Inter-Metallic Phases on the Bonding Strength and Forming Properties of Al/Mg Sandwiched Composite
Effect of Tool Shape on Hole Clinching for CFRP with Steel and Aluminum Alloy Sheet
Effective Linear Friction Welding Machine Redesign through Process Analysis
Experimental Investigation of Interfacial Compounds Evolution in Ultra-Thin Roll Bonded Cu/Al/Cu Strip
Friction Stir Welding between Dissimilar Metalswith Circular Weld Line
High Temperature Deformation and Diffusion Brazing of INCONEL 718 Sheet
Influence of Eccentric Arrangement of the Die for the Temperature Distribution in the Sample during the Pressure-Assisted Induction Sintering (PAIS)
Numerical Analysis of Welding Phenomena in High-Frequency Electric Resistance Welding
Numerical Investigation on Dissimilar Friction Stir Welding of Aluminum and Magnesium Sheets
Robotic Friction Stir Welding of AA5754 Aluminum Alloy Sheets at Different Initial Temper States
Roll Hemming Based Innovative Assembly System for Automotive Products
Simulative Model for the Evaluation of Thermo-Mechanical Effects in Friction Stir Spot Welding (FSSW) of Aluminum Sheets
Chapter 7. Magnesium Forming
Dynamic Recrystallization Behaviour of Twin Roll Cast AZ31 Strips during Hot Deformation
Effect of SiC Addition on the Mechanical Properties of Twin-Roll-Cast AZ31 Sheet
Extrusion Limit Diagram of Mg Alloy by Using Finite Element Method
Flow Curve Modelling of a ZM21 Magnesium Alloy and Finite Element Simulation in Hot Deformation
Solution Heat Treatment, Forming and In-Die Quenching of a Commercial Sheet Magnesium Alloy into a Complex-Shaped Component: Experimentation and FE Simulation
Work-Hardening Behavior upon Reverse Loading in a Rolled AZ31 Magnesium Alloy Sheet
Chapter 8. Numerical Modelling
Comparison of Rigid-Plastic and Elastoplastic Finite Element Predictions of a Tensile Test of Cylindrical Specimens
Development of Dynamic Recrystallization Model Based on Cellular Automata Approach
Efficient Numerical Simulation of Steady-State Metal Forming Processes by an Iterative Surface Calculation
Finite Element Simulation of Formed Steel Components
Multiscale Modelling of Mechanical Properties of Steel Deformed in Semi-Solid State - Experimental Background
Physical and Numerical Modelling of Wire Drawing Process of Mg Alloys in Heated Dies Accounting for Recrystallization
Prediction of Defects in Multistage Cold Forging by Using Finite Element Method
Prediction of Life of Compound Die Using Artificial Neural Network (ANN)
Slab Analysis and FEM Simulation on Rotating Compression Forming of Double-Layer Clad Cylinder under Constant Shear Friction
Viscoplastic Damage Constitutive Modelling of High-Speed Railway Axle Steel 25CrMo4
FFT-Based Modelling of Transformation Plasticity in Polycrystalline Materials during Diffusive Phase Transformation
Chapter 9. Tube and Hydro Forming
Application of the Warm Hydroforming Process to the Manufacturing of Pre-Aged 6xxx Series Components Using a Numerical/Experimental Approach
Axial Crushing in a Novel Technique of Thin-Walled Tube
Geometrical Phenomena in Tube Bending with Local Induction Heating
Micro Rotary Plunge-Swaging of Stainless Pipes
Production of Special Tubes with a Variety Cross-Sectional Shapes by Bunch Drawing and Fluid-Mandrel Drawing
Research on Wrinkling Behavior in Tube Hydroforming with Axial Feeding
Chapter 10. Optimisation
Application of Regression Trees in Optimization of Metal Forming Process
Arti?cial Bee Colony Algorithm Used for Solving some Inverse Problem in Solidi?cation of the Binary Alloy
Determination of the Heat Flux in the Process of Solidi?cation by Applying the Ant Colony Optimization Algorithm
Optimization of Pressure Path in Sheet Hydroforming Process Using Artificial Intelligence and Simulated Annealing
Process-Controlled Forming Using an Intelligent Tool on a Servo Press
Chapter 11. Other Processes
Analysis of Insulating Object Plastic Injection Forming of Bicycle Dynamo Hub Power Connector
Effect of Secondary Cooling on Microstructure, Texture and Properties of 1.2wt% Si Non-Oriented Electrical Steel Processed by Twin-Roll Strip Casting
Semisolid Casting of Hypereutectic Al-Si-Cu Alloy with Sono-Solidified Slurry
Temperature Monitoring during Laser Beam Forming of Steel Sheets
Superplastic Blow Forming of Aerospace Components
Temperature Measurement in the Rotary Forming Process of a Nickel Superalloys (INCONEL) Sheet during Induction Heating
Chapter 12. Powder and Advanced Materials
A Novel Forming Process for Powder Metallurgy of Superalloys
Development of Ferrite-Bainite Dual Phase (FBDP) High Strength Steel for Automotive Industries
Microstructural Unit Controlling Cleavage Crack Propagation in High Strength Bainitic Steels
Sintering Kinetics of the Powder during Fields-Activated Micro-Forming and Sintering (Micro-FAST) of Copper Micro-Gears
Filling of Surface Pores on Aluminum Foam with Aluminum Powder by Selective Laser Melting
Metal Powder Injection Molding Process for Manufacturing Adapter Component
Chapter 13. Rolling
A New Rolling Model for Three-Roll Rolling Mills
A Study on the Rolling of a Multilayer Plate Composed of Teflon-Cu-SPCC Steel
Analysis of the Helical-Wedge Rolling Process for Producing a Long Stepped Shaft
Development of Finite Element Analysis Model for Plug Mill Rolling
Effect of Grain Size on Cross Wedge Rolling of Micro Copper Rod
Finite Element Modeling of Shear Strain in Rolling with Velocity Asymmetry in Multi-Roll Calibers
Hot Rolled Coil Property Heterogeneities due to Coil Cooling: Impact and Prediction
Influence of Process Parameters on Distribution of Shear Strain through Sheet Thickness in Asymmetric Rolling
Influence of Roller Shape on Deformation Behavior in Roll Bending of Structural Channels
Investigation on Dimensional Accuracy in Micro Cross Wedge Rolling of Metals
Measurement of Residual Stresses in Work and Backup Rolls for Strip and Plate Mills and its Effect on the Final Load Situation
Milling Curves Influence in Ring Rolling Processes
Optimization of Micro Cross Wedge Rolling and Surface Morphology of Micro Stepped Components
Prediction of Microstructure and Resulting Rolling Forces by Application of a Material Model in a Hot Ring Rolling Process
Process of Ontology Construction of Rolling Metal Sheets Industrial Process
Process Planning of Gear Rolling with the Finite Element Method
Research on the Minimum Rolled Thickness of Strip Steel in Cold Tandem Rolling
Residual Stress Distribution through Thickness in Cold-Rolled Aluminum Sheet
Roll Design Method of Single-Stage Profile Ring Rolling Based on Modified UVDET
Stress Field in Rolls under Load - Measurement and FEM Calculations
Study of the Effect of Cyclic Strain Reversal on the Interactions between SRX and PPT in the Microalloyed Austenite during Hot Rolling Process
The Influence of Rolling Schedule on the Dynamic Properties of Accumulatively Roll Bonded Nano-Layered Cu-Nb
Triaxiality Effect on Material Damage Evolution in Hot Rolling
Chapter 14. Shearing
Direct Punching in Inclined Ultra-High Strength Steel Sheets
Dry Shearing of Micro-Alloyed Steels
Fabrication of WS2-Dispersed Al Composite Material by Compression Shearing Method at Room Temperature
Improvement in Punching Properties of High Tensile Strength Steel Sheet by Heat-Treatments for Reduction of Center Segregation
Influence of the Punch Penetration Depth in Half Punching on the Cut Edge after Shaving
Investigation on Flatness of Shim Rings in Blanking
Chapter 15. Sheet Metal Forming
A New Approach for Quantitative Evaluation of Bending Components
A Study on the Hinge Bracket Forming by Thickening of a Sheet
A Validated Analytical Solution for the Two-Dimensional Bending of Aluminium Plates under Creep-Ageing Conditions
Adjustment of Blank Holding Force Distribution Utilizing a Multi-Point Die Support System
Concept Validation for Selective Heating and Press Hardening of Automotive Safety Components with Tailored Properties
Effect of Initial Thickness to Cut End Deformation of Hat Shape Channel Steel by Roll Forming
Evaluation of Anisotropy by Two Different Tests for TRIP800 Steel
Instability Prediction during Stretch Bending of AHSS Sheet Metal
Investigations on the Effect of Ultrasonic Vibration in Cylindrical Cup Drawing Processes
Novel Wear Testing Apparatus to Investigate the Reciprocating Sliding Wear in Sheet Metal Forming at Elevated Temperatures
Theoretical and Experimental Research on a Method for Producing a Triangular Rosette-Shaped Flange
Analysis of the Potential of Incremental Stress Superposition on Air Bending
Investigation of Scar Formation in Fine Blanking Processes and their Prediction in 3D ALE Simulations
Chapter 16. Titanium Forming
Effect of Process Parameters on Laser Beam Formed Titanium Alloy Sheet
Experimental Investigation and Phenomenological Modeling of the Quasi-Static Mechanical Behavior of TA6V Titanium Alloy
Experimental Research on Circular Milling of Bi-Layer Composite Materials Consisting of CFRP Laminates and Titanium Alloys
Numerical Analysis of Rolling Extrusion Process of a Toothed Shaft from Titanium Alloy Ti6Al4V
On the Damage Criteria and their Critical Values for Flowforming of ELI Grade Ti64
Orbital Forging of a Ti6Al4V Alloy Jaw Coupling Sleeve