
Physical Properties and Application of Advanced Materials
Trans Tech Publications Ltd (Publisher)
Published on 8. May 2020
Book
Paperback/Softback
254 pages
978-3-0357-1458-6 (ISBN)
Description
This volume was compiled from the proceedings of the 13th International Conference on the Physical Properties and Application of Advanced Materials (ICPMAT), which was held at Hanoi University of Science and Technology, Vietnam from September 4 to 7, 2018. The presented collection of papers contains the newest research results and achievements in the field of physical properties and the application of advanced structural and functional materials. We hope this collection will be interesting and useful for many specialists from the area of materials science and metallurgical technologies.
This volume was compiled from the proceedings of the 13th International Conference on the Physical Properties and Application of Advanced Materials (ICPMAT), which was held at Hanoi University of Science and Technology, Vietnam from September 4 to 7, 2018. The presented collection of papers contains the newest research results and achievements in the field of physical properties and the application of advanced structural and functional materials. We hope this collection will be interesting and useful for many specialists from the area of materials science and metallurgical technologies.
More details
Series
Language
English
Place of publication
Zurich
Switzerland
Target group
Professional and scholarly
Illustrations
Illustrations, unspecified
Dimensions
Height: 240 mm
Width: 170 mm
Thickness: 13 mm
Weight
570 gr
ISBN-13
978-3-0357-1458-6 (9783035714586)
DOI
10.4028/b-Keu6Dp
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions

Kenji Matsuda | Pham Mai Khanh | Dang Quoc Khanh
Physical Properties and Application of Advanced Materials
Software
approx. 05/2020
Trans Tech Publications Ltd
€275.36
Not yet published

Kenji Matsuda | Pham Mai Khanh | Dang Quoc Khanh
Physical Properties and Application of Advanced Materials
E-Book
04/2020
Trans Tech Publications Ltd
€211.86
Available for download
Content
<ul><li>Preface</li><li>Applicability of Wiedemann-Franz Law to Thermal Conductivity of Molten Field's Metal</li><li>Time Dependence of Muon Spin Relaxation Rate in Aluminum and Al-1.6%Mg<sub>2</sub>Si Alloy</li><li>Effect of Electroless Ni-P Plating on the Bonding Strength of PbTe Thermoelectric Module Using Silver Alloy-Based Brazing</li><li>Micromechanical Analysis of Dislocation and Precipitate Interactions in Aluminum Alloys</li><li>Robustness in Coupling between Iron and Rare Earth Spins in Rare Earth Orthoferrites</li><li>Dislocation Dynamics Simulations of Dislocation-Particle Bypass Mechanisms</li><li>
<i>In Situ</i> EBSD Observation of Pearlite-Austenite Reverse Transformation in Eutectoid Steel</li><li>First-Principles Study of the Adsorption of Carboxylic Acid on Cu(111)</li><li>Corrosion Resistance of the Sintered Fe-Cu-C, Fe-Cu-Ni-Mo-C and Fe-Cr-Mo-C Alloys Coated with a Rust Preventive Oil</li><li>Effects of Titanium Surface Wettability on Osteoblast Behavior <i>In Vitro</i></li><li>Nanotube Formation on Ti-15Zr-4Nb-4Ta by Anodic Oxidation</li><li>Removal of Tramp Elements from Molten Iron for Recycling Ferrous Scraps</li><li>Effects of Oxygen and Nitrogen Addition on Phase Transformation in Ti-10at%V</li><li>Effect of Heat Treatments on Wettability of Nacre</li><li>Process Design for Superalloys Sheet Rotary Forming</li><li>Effect of Thermomechanical Processing on Grain Size, Texture and Mechanical Properties of Pure Magnesium</li><li>Microstructure and Catalytic Activity of Melt Spun Al-Cu-Fe Ribbons</li><li>The Upgrading of Ha Tinh Ilmenite to Synthetic Rutile by Becher Process</li><li>Synthesis of Ordered Mesoporous Carbon from Vietnam Natural Kaolin Clay for Supercapacitor Application</li><li>Microstructures in HAZ after Heat Treatment of Carbon Steel and Austenitic Stainless Steel Welds</li><li>Influence of Ag Doping on the Electrochemical Supercapacitor Characteristics of Manganese Dioxide Prepared by Pulsed Potentiostatic Electrodeposition</li><li>Effect of pH of Coating Solution on Adhesion Strength of Hydroxyapatite and Octacalcium Phosphate Coatings on AZ31 Magnesium Alloy</li><li>Fabrication of Silicon Carbide from Vietnamese Rice Husk Charcoal and Diatomite by Electric Arc Furnaces</li><li>The Effect of Oxidation Temperature on Activating Commercial Viscose Rayon-Based Carbon Fibers to Make the Activated Carbon Fibers (ACFs)</li><li>Synthesis and Luminescent Properties of Europium Doped Zirconia Nanoparticles</li><li>Change in the Strength of Steel Grade 11 Loaded at Room Temperature</li><li>Formation of Heterostructure with Appearance of ?-Al Phase in Hyper- and Eutectic Al-Si Alloys by Solidification at High Rate</li><li>Simultaneous Synthesis and Densification of Carbon Nano-Materials Dispersed Boron Carbide Composites Using Pulsed Electric-Current Pressure Sintering (PECPS)</li><li>Microstructure and Mechanical Properties of <i>In Situ</i> Cast Aluminum Based Composites Reinforced with TiC Nano-Particles</li><li>Reciprocal Space Map Measurement of Ceramics Thin Films for Unequal Lattice Change at High Temperature</li><li>Evaluation of the Material Properties of the Ti and CoCr Alloys Prepared by Laser Powder Bed Fusion</li><li>Wear-Resistant Surfacing Layer Preparated by High Efficiency Twin-Wire Indirect Arc Welding</li></ul>
<i>In Situ</i> EBSD Observation of Pearlite-Austenite Reverse Transformation in Eutectoid Steel</li><li>First-Principles Study of the Adsorption of Carboxylic Acid on Cu(111)</li><li>Corrosion Resistance of the Sintered Fe-Cu-C, Fe-Cu-Ni-Mo-C and Fe-Cr-Mo-C Alloys Coated with a Rust Preventive Oil</li><li>Effects of Titanium Surface Wettability on Osteoblast Behavior <i>In Vitro</i></li><li>Nanotube Formation on Ti-15Zr-4Nb-4Ta by Anodic Oxidation</li><li>Removal of Tramp Elements from Molten Iron for Recycling Ferrous Scraps</li><li>Effects of Oxygen and Nitrogen Addition on Phase Transformation in Ti-10at%V</li><li>Effect of Heat Treatments on Wettability of Nacre</li><li>Process Design for Superalloys Sheet Rotary Forming</li><li>Effect of Thermomechanical Processing on Grain Size, Texture and Mechanical Properties of Pure Magnesium</li><li>Microstructure and Catalytic Activity of Melt Spun Al-Cu-Fe Ribbons</li><li>The Upgrading of Ha Tinh Ilmenite to Synthetic Rutile by Becher Process</li><li>Synthesis of Ordered Mesoporous Carbon from Vietnam Natural Kaolin Clay for Supercapacitor Application</li><li>Microstructures in HAZ after Heat Treatment of Carbon Steel and Austenitic Stainless Steel Welds</li><li>Influence of Ag Doping on the Electrochemical Supercapacitor Characteristics of Manganese Dioxide Prepared by Pulsed Potentiostatic Electrodeposition</li><li>Effect of pH of Coating Solution on Adhesion Strength of Hydroxyapatite and Octacalcium Phosphate Coatings on AZ31 Magnesium Alloy</li><li>Fabrication of Silicon Carbide from Vietnamese Rice Husk Charcoal and Diatomite by Electric Arc Furnaces</li><li>The Effect of Oxidation Temperature on Activating Commercial Viscose Rayon-Based Carbon Fibers to Make the Activated Carbon Fibers (ACFs)</li><li>Synthesis and Luminescent Properties of Europium Doped Zirconia Nanoparticles</li><li>Change in the Strength of Steel Grade 11 Loaded at Room Temperature</li><li>Formation of Heterostructure with Appearance of ?-Al Phase in Hyper- and Eutectic Al-Si Alloys by Solidification at High Rate</li><li>Simultaneous Synthesis and Densification of Carbon Nano-Materials Dispersed Boron Carbide Composites Using Pulsed Electric-Current Pressure Sintering (PECPS)</li><li>Microstructure and Mechanical Properties of <i>In Situ</i> Cast Aluminum Based Composites Reinforced with TiC Nano-Particles</li><li>Reciprocal Space Map Measurement of Ceramics Thin Films for Unequal Lattice Change at High Temperature</li><li>Evaluation of the Material Properties of the Ti and CoCr Alloys Prepared by Laser Powder Bed Fusion</li><li>Wear-Resistant Surfacing Layer Preparated by High Efficiency Twin-Wire Indirect Arc Welding</li></ul>