Material and Manufacturing Technology IV

Preface, Committees and Sponsors
Chapter 1: Advanced Materials Engineering and Technology
Numerical Simulation of Detonation in Fine Aluminum-Oxygen Mixtures with Hybrid Combustion Model
Surface Integrity and Cutting Temperature in Machining of Biomedical Magnesium Alloys an Overview
Flexural Strength of PLA/Kenaf Green Composite
Aging Behavior of the Polyether Polyurethane Films Irradiated by UV
Spray Pyrolysis of Metal Oxides SnO2 and In2O3 as an Example of Thin Film Technology: Advantages and Limitations for Application in Conductometric Gas Sensors
Consolidation of 2124 Aluminum Alloy - Carbon Nanotube Reinforced Metal Matrix Composites
Influence of Ar Pressure on Product Characteristics of Self-Propagating High-Temperature Synthesis from WO3/B2O3/Al Reactant System
Synthesis of Fe-Al2O3 Composite by High-Frequency Induction-Heated Combustion
Effect of Dispersants Pre-Adsorption and Grinding on Dispersion Performance of Kaolin Pigment
Self-Propagating High-Temperature Synthesis of Fe-W(B, C) Based Composite
Electrochromic Performance of NiO Films in Alkaline Medium
Development of SiO2 Nanolubrication System for Better Surface Quality, more Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140
Effect of Screw Rotation Speed on Mechanical Properties of Extruded PLA/Kenaf Nanocomposites
Ruderman-Kittel-Kasuya-Yosida Magnetic Interactions in Chemically Synthesized Zn-Fe-AlO Nanocrystallites
Photoluminescence Investigation of Dy3+ Ions in Bi2O3-B2O3 Glasses
Fabrication and Reinforcing Mechanism: In Situ Grown Carbon Nanotube Reinforced Carbon/Carbon Composites with High Interlaminar Shear Strength
Effect of the Annealing Treatment on the Microstructure, Microhardness and Corrosion Behaviour of Al0.3CrFe1.5MnNi0.5 High-Entropy Alloys
Oxidation of Oxide Dispersion Strengthened Steels: I. Influence of Alloy Composition
Dielectric Property of Si3N4/SiBCN Composite Ceramics Doped with SiC
Optimization of Parameters in Fiber Reinforced Polyurethane Composited Reaction Injection Molding
Synthesis and Characterization of NIR Luminescent LaF3:Ln3+ Nanoparticles and their Transparent Epoxy Nanocomposites
Oxidation of Oxide Dispersion Strengthened Steels: II. Kinetics and Mechanism
Study on the Foaming Behavior of PS-CO2 by Using Water or Ethanol as Co-Blowing Agent
Structural and Optical Behavior of nanoCe2(SO4)3, CeF3 and CePO4:Tb3+ Composites Embedded in PVOH Matrix
The Metastable Phase Responsible for Hardenig in an Al-Mg Alloy Aged at 473K
Investigations of Nanostructure and Photoluminescence Properties of Nanoporous Silicon
Characterization of High Density Solid Waste Biopolymer Foam
Controlling the Ferrite/Austenite Phase Balance of SAF 2707HD Hyperduplex Stainless Steel Weldment
Effect of Applied Current Density on the Electrodeposition of Ni on Ti Substrate
Morphology and Mechanical Properties of HDPE/Bio-Polymer as Compounding Materials
Antimicrobial and Physical Properties of Chitosan Film as Affected by Solvent Types and Glycerol as Plasticizer
Thermal Conductivity of Akar Bamboo (Dendracalamus pendulus) and Semantan Bamboo (Gigantochloa scortechinii)
Mechanical Properties of UV Irradiated Bio Polymer Thin Films Doped with Titanium Dioxide
Adhesive Bonding Strength and Adhesive Penetration of Two Malaysian Medium Hardwoods
Optimal Conditions of Electrostatic Spray Deposition (ESD) for Composite Biomaterials Coating for Biomedical Applications
A Novel Approach for Bone Scaffold from Oil Palm Empty Fruit Bunch-Cellulose Phosphate / Glass Material
Research Development of the Laser Surface Modification to Improve the Corrosion-Resistance of Titanium and Titanium Alloys
Research Progress of the Surface Oxidation of Titanium and its Alloys
Development Status of Laser Clad Cobalt-Based Alloy Coatings
AlPO4-Modified Silicate Glasses as a Fertile Source for Crystallization of Various Technically Favorable Minerals
Effects of Kenaf and Rice Husk on Thermal Properties of Kenaf/CaCO3/HDPE and Rice Husk/CaCO3/HDPE Hybrid Composites
Effect of Epoxidized Palm Oils Loading on the Crosslink Density and Rebound Resilience Characteristic of SBR Vulcanizates
Effects on Tensile and Morphology Properties of Casuarina equisetifolia Reinforced Unsaturated Polyester Composites
Effect of Anodizing on Strength of Carbon-Fibre Aluminium-Laminated Composites
Mechanical Properties Improvements of Resin-Based Nanocomposites Reinforced by Multi-Walled Carbon Nanotubes
Application of the High Strength Steel in the Automobile
Effect of Crack Length on Mixed-Mode Cohesive Fracture of the Adhesively Bonded Joints
The Evaluation of Mould Made from Aluminium and Mild Steel for Polypropylene Integral Hinges Test Samples
Strength and Folding Performance of Polypropylene Packaging Samples in Hot Air and High Humidity Condition
A Case Study on Effect of Feed Rate on Machinability of Austempered Ductile Iron
Grinding Force Research on Nanostructured Ceramic Coatings
Blow Forming of Steel and IN718 for Propulsion Components
Research on Nano-Ceramic Coatings Precision Grinding

Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling
CO2 Laser Cladding of Mild Steel Using Iron Based Powder and Silicon Carbide Particles
Optimization of Process Parameters of Rotary Ultrasonic Machining Based on Taguchis Method
Acoustic Study Based on Sustainable Green Polymer Treated with H2O

In Situ Transesterification of Vegetable Oil for Biodiesel Production via Ultrasound Clamp on Tubular Reactor as an Environment Sustainable Manufacturing Process
Dynamic Response of FDM Made ABS Parts in Different Part Orientations
Research on Kinetics of Hydrolysis Preparation of Micro-Molecular Dextran
Scaling up Process Output of Monomer Reactor
Characterization of Rice Straw Ash and Utilization in Glass Production
Investigation on Carbon Fiber Composites as Architectural EMI Shielding Material
Durability of Traffic Signs and Retroreflective Materials
Performance Study on Scale Inhibition of Biodegradable Water Treatment Agent
Chapter 2: Advanced Mechanical Engineering and Design Technology
Simulation of Laser-Induced Thermoelastic Behavior in Metal Plates
Assessment in Screw Fixing Damages of Particleboard Surface: Difference in Screw Head and Self-Drilling Features
The Analysis of Feeding Crossbeam on the Automatic Aluminous-Winding Machine
The Higher Order Crack-Tip Field for Reissner's Bidirectional FGMs Spherical Shell
Stress Analysis and Fatigue Life Estimation of Bridge Rubber Bearing
Optimization Design of a Framework for an Infrared Seeker
The Higher Order Crack-Tip Field for Reissners Power FGMs Spherical Shell
Impact of Cervical Artificial Disc Implantation on the Biomechanical Function of Adjacent Segments
A Z-Map Based Approach for Extracting the Groove Shape of Impeller
Development and Application of CAE Automatic System Based-On Tcl/Tk
Efficient Surface Segmentation Algorithm for 3-Axis Machining with a Ball-End Cutter
Philoponus' Comments to Aristotle's Physics as the First Step to the Development of Modern Laws of Motion
Dynamic Performance Analysis of Locomotives Based on the Matching between Worn Wheel-Rail Profiles
An Efficient Diffusion Model for a Real-Time Gas Diffusion Simulation System
The Hydraulic Tong in Workover Operations and the Modification to the Design of Gaps Alignment Technique
Design and Simulation on Righting Manipulator of the Remote Control in Workover Operations
Lightweight Design Optimization of Large-Tonnage Hydraulic Press Body Structure
Prediction of Long-Term Properties of Fiberglass Pipe Based on the Shift Factors Method
The Analysis of Pipeline's Penetration Laid on the Elastic-Plastic Seabed Based on the ABAQUS Software
Nonlinear Aerodynamics Reduced-Order Model Based on Multi-Input Volterra Series
Analysis of Vibration Characteristics Basing on a Multi-Rigid Suspension Model and a Multi-Flexible Suspension Model
Positive Solutions of a Strongly Coupled Prey-Predator System
Chapter 3: Power System and Energy Engineering
Algorithm and Realization of Wind Power Prediction System
Comparison of Feedback Loop Control Schemes for Inverters in Microgrids
The Study of Ferromagnetic Resonance Overvoltage and its Suppression Methods in 35kv Power System
An Improved Islanding Detection Method for Photovoltaic Grid-Connected System
Optimization on Resource-Constrained Multi-Project Scheduling of Electric Multiple Unit Overhaul
Contrast Analysis of Solar Energy Water Heating System in the South and North of China
Switch Technology in Intelligent Substation
Research on Neutral-Point Balancing for Three-Level Space Voltage Vector Converter
Distribution System Voltage Regulation with Distributed Generation Based on VQC and SVC
Study on Energy Optimization of Clutch Based on Energy Design Factor
Analysis of Technology Development Trend of the Wind Power Generation-Based on Patent Map Cluster Analysis System and Method
Modeling the Multiobjective Optimization of Electricity Consumption for Residential Consumers
A Combination Method for Mid-Long Term Power Load Simulation and Prediction
Study of Dual-Active Series Resonant DC-DC Converter for High Power Applications
Capacitor Group Zero-Crossing Switching Control System Design
Continuous PWM Modulation Strategy for NPC/H and H Bridge Hybrid Multilevel Converter
Chapter 4: Instrumentation, Measurement and Testing Technologies
Research and Design of Air Conditioning Air Flow Test Bench
Design the CCD Tablet Thickness Measurement System Based on Laser Triangulation Method
Mono Pulse Confocal Microwave Imaging in Breast Cancer Detection
Development of Correlative Investigation Technique (CIT) of Human Performances in Specific Conditions of Postural Malfunctions
Assisted Analyze of the Extenics Dependent Functions in 1D, 2D, 3D and nD Dimensions with LabVIEW Instrumentation
Investigating the Effects of Injection Moulding Process Parameters on Multiple Tensile Characteristics of Plastic Spur Gear via Experimental Approach
Two-Dimensional Laser Detection Front End Circuit and Algorithm
Detection of Pilot-Induced Oscillation (PIO)
Node Localization Technology in Wireless Sensor Networks for Coal Mine Security Monitoring
Based on GPS RTK Technology in Open Pit Mine in the Measurement of the Application Research
Real Time Web Based Monitoring and Calibration System for Diesel Engine
A Safety Monitoring Device for Firefighters Based on Wireless Localization Algorithm
Chapter 5: Signal and Data Processing, Data Mining
The Dividing Frequency Bands Prediction Method Based on Bornitz Model for Train-Induced Environmental Vibration and its Application
Garlic Cutting Umbilical Based on Image Processing and GUI
Clustering Based on a Novel Density Estimation Method
Analysis Based on the Remote Sensing Image of Harbin Urban Heat Island Effect
The Research on Multiscale Image Fusion Based on the Dualtree Complex Wavelet
Signal Analysis on Nasal Consonant Based on Nasal Flow Signal
Gesture Recognition for Briefing Application
Optimization Algorithms Used in Reservoir History Matching
Method on 3D Dense Point Cloud Recovery of Geographical Scene
A Multi-Gradation Stereo Matching Method Based on Edge Feature Points
Implementation of Unitary Music Algorithm Using Xilinx System Generator
Sound Source Localization Based on Microphone Uniform Linear Array
Variable-Number Differential Evolution and its Application on Uranium Ore Classification
Method of Harmonic Detection Based on the Wavelet Transform
A Fuzzy Clustering-Based X-Ray Computed Tomography Simulation under Incomplete Measurements
An Image Reconstruction Simulation Based on Prior Information for the Pulmonary Electrical Impedance Tomography
Research and Simulation of Image Histogram Matching
Based on HMM Intonation Prosody Prediction of Tibetan TTS
Does Complex Metaheuristic Out-Perform Simple Hill-Climbing for Optimization Problems? A Simulation Evaluation
The Application of CRI Method in Fuzzy Reasoning
Fuzzy Recognition Intelligent System Based on Cash Character
Chapter 6: Mechatronics and Robotics Technology
The Research and Development of Automotive Switches Test System Based on LabVIEW
The Perception System of External World for Robot
A Robot Simulation System for Self-Location by Using Field Visual Information
Design of Obstacle Avoidance Detection Based on Substation Intelligent Inspection Robot
Study on Design Proposal of Computerized Numerical Control Machine Networking
A Linear Camera Calibration Applying in Servo Mechanical Arm System with One Camera
Sound Analysis and Synthesis for Audio Simulation System of Flight Simulator
Research on the Vision Processing of Space Robot's Tracking Camera
Highly Scalable Flight Control Architecture for Small Autonomous Helicopter Using PC104/ARM Technology
The Design of Servo System for Azimuth of Directional Antenna Based on PMSM
Unmanned Helicopter Course PID Controller Parameters Setting and Simulation
Application of Sliding Mode Cascade Controller in AC Servo System
Modal Analysis of Permanent Magnet Synchronous Motor of Electric Vehicles
Study of the Force Transferring Model Considering Wheel-Rail Interaction of EMU
Airborne Integrated Vision/Inertial Navigation System for Landing on Aircraft Carrier
Research on the Detection Unit and Control System of CNC Cool Frame Bender
Theoretical and Experimental Study of the Human Upper Limb Dynamic Behavior
Fabrication of Ultrasound-Gravity Field Flow Fractionation Devices Using Engraving Machine and Reliable Sealing Method
Chapter 7: Modern Control and Automation Engineering
Optimization of Satellite Momentum Wheel Control System Based on Genetic Programming
Short-Term Traffic Flow Forecasting of Intersection Based on Approximate Dynamic Programming
Semistability of Nonlinear Control Systems
Robust H? Control for Singular Networked Control Systems with Uncertain Time-Delay
Optimal Excitation Control System of Synchronous Generator in Big Disturbance Based on Improved LOEC Mode
The Study of DC Motor Position Controller Parameter Setting and Simulation
PI Controller Design for Temperature Control of Reheating Furnace Walking Hearth Type in Setting up Process
Development and Application on Intelligent Sub-Station of Automatic Production Line Based on the STC12C5A60S2 MCU
Solar Energy Automatic Tracking System Based on Plane Normal Vector Control Research
With DGPS-RTK Terminal Yard Cranes Real-Time Operating System
Temperature Controller of Heating Furnace Based on Fuzzy Neural Network Technology
Chapter 8: Electronics and Integrated Circuits, Embedded Technology
Design of Direct Digital Synthesizer Based on FPGA
A Dual-Mode MPPT Algorithm Based on the Golden Section Point of the PV System
Incremental Circuit and Sensitivity Simulations Using Iterated Timing Analysis Algorithm
A Study for Embedded Software Double-Fault Testability
A 100-MS/s CMOS Sample-and-Hold Circuit with Input Common Mode Feedback
Design of the High-Speed High-Resolution Latched Comparator
Design of a Novel Excitation Circuit for Low Perming Error Fluxgate
Simulation of an AlGaN/GaN HEMT for Ka-Band
An Improved Data Weighted Averaging for Segmented Current-Steering DACs
Design of SDH Positive/Zero/Negative Justification Circuits Based on FPGA
Chapter 9: Information Technologies, Communication and Networks
Distribution Network and Multiple Power Bi-Level Programming
Important Position of Information Science in Studying Complex System
Study on Dynamic Services Composition of Web Services Based on BPEL
The Research on Information Sharing in Supply Chain and its Information Sharing Entities
Net-Tree: A Novel Self-Organizing Topology for Wireless Sensor Networks
Security Research and Measures for the Internet of Things
An Improved Routing Technology Based on Ant Colony Algorithm for Indoor Building Environment
Effect of Distance on the Maximum Data Transfer for Different Mounting Elevations of XBee Pro Module in Viral Advertisement System
Critical Evaluation on Steganography Metrics
Efficient Scratchpad Memory Management for Mobile Multimedia Application
A Tiny Development Platform with Virtualized Peripherals for Education of Embedded Software Design
Modeling and Simulation of FC-AE-ASM Network
Implementation of Vehicle Control System Based on IPV6-CAN Gateway
The Research of Electronic Payment Platform Based on Public Key Infrastructure
A Provably Secure E-Cash Scheme with Loss-Tracing
A Note on Optimal Function for Similarity Measure in Ontology Application
An Adaptive Tabu Search Method for Optimizing Procurement Plans under Correlated Demands
Simulation for Generate Efficient Evaluation Plans with Materialized Views
Energy Guided and Workload Adaptive Modeling for Live Migration
Research on the Synthetically Quantitative Evaluation System of Ecological Environment Quality of the Water Conservancy and Hydroelectric Power Project
Impulsive Synchronization of GREY-SCOTT System with the Cross-Diffusion Effect
A Research on Real-Time Hand-Detection Technology Oriented to the Somatic Games
A Simple Multi-Models Rendering Framework - PM-OCMMRF
Based on Time-Delay and Bandwidth Relay Selection Algorithm for Radio and Television Services
System Design Considerations for Satellite Communications on the Move
Formal Model of Classic Operating System Kernel
An Identity on Resistance Distances
Simulation for View Selection in Data Warehouse
Design of a Savant Subsystem of EPC and Implementation on Intelligence Characteristics of a Savant Based on Agent
Lessons Learned from Design and Development of Military Scenario Definition Language Scenario Editing Toolset
A Low-Complexity Algorithm of Joint Multiple Frequency Offsets and Channels Estimation in Cooperative Relay Systems
Supervised Multidimensional Scaling for Ontology Similarity Measure and Ontology Mapping via Multi-Dividing
Internal Cloud Storage Architecture Implemented in Crop Germplasm Resources Data
HLA Based High-Performance Visualized Simulation with MATLAB Seamlessly Embedded
Chapter 10: New Technologies and Methods in Civil Engineering and Environment
Research on Hygroscopic Material Improving Moist Environment of Building Underground Layer
Analysis of Precast Piles for Piling Process
Preparation and Verification of a Limit Protective Isolation Structural Analysis Programs
Numerical Analysis of Back Berm on Road Engineering with FEM
Analysis on the Location Change of Taoist Architecture - A Case Study of Shanxi Taoist Buildings
Study on Hydraulic Characteristics of the Dragon-Raise-Head Spillway Tunnel
Research on Seismic Exploration Techniques in Complex Lithologic Oil Filed Exploration
Stability Analysis of Large Underground Station Based on Coupled Fluid-Solid Theorem
Experimental Research on Settlement Distribution of Composite Foundation Configured with Walled Soil Improvement
Corrosion Behavior of Steel Structure Residences under Atmospheric Condition in Dujiangyan - A Year Experimental Summary
3D Modeling of Underground Geological Park Based on Terrestrial Laser Scanner
Design and Development of Low Cost Certified Green Building for Non Residential Existing Building (NREB)
Smart City - A New Mentality for Resource-Based Cities' Sustainable Development
Research of Sheet Metal Parts Library Construction and Unfolding Method Based on Pro/ENGINEER
Developing Digi-Mechanical Formwork for Construction in Environments of Displacement
Mechanism of Manufacturing and Adoption of Nanomaterials in Contemporary Architectural Project of Developing Countries
The Tracer Experimental Method for Determining Longitudinal Dispersion Coefficient of Nature River
Research of Cascade Reservoirs Flood Limit Level Dynamic Control Based on Game Theory
Study on the Geological Disasters of Heap Leaching Field and the Prevention of a Copper Mine in Inner Mongolia
Hydrologic and Hydraulic Analysis of City Flood Control
Study on Decomposition and Decision Simulation System for Carbon Intensity Target Reduction
The Technology of Remote Sensing and its Application to Terrestrial Ecosystem Restoration
Chapter 11: Organization of Production and Engineering Management
Assembly Line Balancing in Manufacturing Processes: Using Simulation Model
The Property of Hierarchical Structure in Manufacturing
Tools Management Solution for Small Enterprises
AHP Approach for Material Management Operation in a Cutting Edge Electronics Design Manufacturing Company
Production System Improvement by Integration of FMEA with 5-Whys Analysis
Preventive Maintenance Checklist towards Effective Maintenance System: A Case Study in Semiconductor Industry
Safety Assessment of Subway Station Operation Based on Grey Clustering Method
The Study and Application of Workflow Management System Based on Multi-Role Playing
Production Control Strategy and its Parameters Optimization for a Two-Stage Production System
The Selection of Agile Development's Effort Estimation Factors Based on Principal Component Analysis
Rapid Vehicle Scheduling for Emergency Personnel Evacuation in Disaster Rescue
PLC-Based Laboratory Intelligent Management System
Analysis and Suggestions for the Development of Vehicle Ro-Ro Transportation in the Chuanjiang River
Research on Oil Depot Safety Evaluation Based on Dow Chemical Fire and Explosion Index Assessment Method
Investigation on Safety Condition of Cell Phone Charging
Grey Relational Analysis Model for Comprehensive Evaluation on Risk Early-Warning for Enterprises Investment Project
The "U-Type" Wells History of Fuzzy Ball Drilling Fluids for CBM Drilling in China
Analyzing Crash Frequency by Collision Type at Freeway Diverge Areas
Study of Logistics Warehouse Management System Based on RFID
Research on Urban Rail Transit Resource Allocation Based on K-Shortest Paths Algorithm