Advances in Ceramics for Environmental, Functional, Structural, and Energy Applications
1st Edition
Published on 25. September 2018
Book
Hardback
240 pages
978-1-119-54325-1 (ISBN)
Description
This volume contains 20 manuscripts presented during the Materials Science & Technology 2017 Conference (MS&T'17), held October 8-12, 2017 at the David L. Lawrence Convention Center, Pittsburgh, PA. Papers from the following symposia are included in this volume:
9th International Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing
Advances in Dielectric Materials and Electronic Devices
Construction and Building Materials for a Better Environment
Innovative Processing and Synthesis of Ceramics, Glasses and Composites
Materials Issues in Nuclear Waste Management in the 21st Century
Materials Development for Nuclear Applications and Extreme Environments
Materials for Nuclear Energy Applications
Nanotechnology for Energy, Healthcare and Industry
Processing and Performance of Materials Using Microwaves, Electric and Magnetic Fields, Ultrasound, Lasers, and Mechanical Work - Rustum Roy Symposium
These symposia provided a forum for scientists, engineers, and technologists to discuss and exchange state-of-the-art ideas, information, and technology on advanced methods and approaches for processing, synthesis, characterization, and applications of ceramics, glasses, and composites.
Each manuscript was peer-reviewed using The American Ceramic Society's review process. The editors wish to extend their gratitude and appreciation to their symposium co-organizers, to all of the authors for their valuable submissions, to all the participants and session chairs for their time and effort, and to all the reviewers for their comments and suggestions.
We hope that this volume will serve as a useful reference for the professionals working in the field of materials science.
9th International Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing
Advances in Dielectric Materials and Electronic Devices
Construction and Building Materials for a Better Environment
Innovative Processing and Synthesis of Ceramics, Glasses and Composites
Materials Issues in Nuclear Waste Management in the 21st Century
Materials Development for Nuclear Applications and Extreme Environments
Materials for Nuclear Energy Applications
Nanotechnology for Energy, Healthcare and Industry
Processing and Performance of Materials Using Microwaves, Electric and Magnetic Fields, Ultrasound, Lasers, and Mechanical Work - Rustum Roy Symposium
These symposia provided a forum for scientists, engineers, and technologists to discuss and exchange state-of-the-art ideas, information, and technology on advanced methods and approaches for processing, synthesis, characterization, and applications of ceramics, glasses, and composites.
Each manuscript was peer-reviewed using The American Ceramic Society's review process. The editors wish to extend their gratitude and appreciation to their symposium co-organizers, to all of the authors for their valuable submissions, to all the participants and session chairs for their time and effort, and to all the reviewers for their comments and suggestions.
We hope that this volume will serve as a useful reference for the professionals working in the field of materials science.
More details
Series
Language
English
Place of publication
United States
Publishing group
John Wiley & Sons Inc
Target group
Professional and scholarly
Product notice
sewn/stitched
Cloth over boards
Dimensions
Height: 235 mm
Width: 157 mm
Thickness: 18 mm
Weight
506 gr
ISBN-13
978-1-119-54325-1 (9781119543251)
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Morsi M. Mahmoud | Kumar Sridharan | Henry Colorado
Advances in Ceramics for Environmental, Functional, Structural, and Energy Applications
E-Book
10/2018
1st Edition
Wiley
€217.99
Available for download
Morsi M. Mahmoud | Kumar Sridharan | Henry Colorado
Advances in Ceramics for Environmental, Functional, Structural, and Energy Applications
E-Book
09/2018
1st Edition
Wiley
€217.99
Available for download
Persons
Content
Preface ix
MATERIALS FOR NUCLEAR ENERGY APPLICATIONS
Westinghouse Accident Tolerant Fuel Materials 3
Frank Boylan, Peng Xu, Javier Romero, and Ed Lahoda
Investigations of Capacitor Discharge Welding for the Attachment of Endcaps to Molybdenum-Based Nuclear Fuel Rod Cladding 7
Jerry E. Gould, Cem Topbasi, and Bo Cheng
Evaluation of U3Si2 Fuel Pellets Sintered in an Argon vs. Vacuum Environment 21
Rita Hoggan, Jason Harp, and Lingfeng He
PROCESSING AND PERFORMANCE OF MATERIALS USING MICROWAVES, ELECTRIC AND MAGNETIC FIELDS, ULTRA-SOUND, LASERS, AND MECHANICAL WORK-RUSTUM ROY SYMPOSIUM
Microwave-Augmented Crystallization and Decrystallization in Ceramic Processing -A Phenomenology-Based Commentary 29
Boon Wong
Effects of Elastic Waves at Several Frequencies on Biofilm Formation in Circulating Types of Laboratory Biofilm Reactors 43
Hideyuki Kanematsu, Shogo Maeda, Dana M. Barry, Senshin Umeki,Kazuyuki Tohji, Nobumitsu Hirai, Akiko Ogawa, Takeshi Kogo, Hajime Ikegai, and Yoshimitsu Mizunoe
Resilient Graphitic Carbons from Electro-Thermal Fluidized Bed Reactor 53
Soeren Koester, Eric Salmon, and Carsten Wehling
Heavy Clay Body Properties for Hybrid Microwave Firing 59
Garth V A Tayler, Mike Anderson, and Mike Hamlyn
Effective Permittivity and Microwave Heating Characteristics of Electric Conductor and Insulator (Dielectrics) Mixtures 69
Noboru Yoshikawa
Porous Ceramic/Metal Composite Body for DPF (Diesel Particulate Filter) and the Microwave Heating Behavior 79
Noboru Yoshikawa, Chang Chuan Lee, Naoki Inoue, Shoji Taniguchi, and Sergey Komarov
CONSTRUCTION AND BUILDING MATERIALS FOR A BETTER ENVIRONMENT
Study on Preparation of Portland Cement by Using Coal Fly Ash 87
Hui Sun, Miaolian Bian, Dongyang Ma, Shichao Chen, Zhicheng Cao, and Daohong Wu
Corrosion Behaviour of Steel-Reinforcement in C3H7NO2 S-Admixed Concrete Immersed in Saline/Marine Simulating-Environment 95
Joshua Olusegun Okeniyi and Abimbola Patricia Idowu Popoola
C4H11NO Performance on Steel-Rebar Corrosion in Industrial/ Microbial Simulating Environment 109
Joshua Olusegun Okeniyi and Abimbola Patricia Idowu Popoola
INNOVATIVE PROCESSING AND SYNTHESIS OF CERAMICS, GLASSES AND COMPOSITES
Numerical Investigation of Heat Transfer and Reaction Kinetics during the Self-Propagating High-Temperature Synthesis of Silicon Nitride 123
Venkata V. K. Doddapaneni and Sidney Lin
Synthesis of Carbide Ceramics from Activated Carbon Precursors Loaded with Tungstate, Molybdate, and Silicate Anions 137
Grant Wallace, Jerome Downey, Jannette Chorney, Katie Schumacher, Trenin Bayless, Alaina Mallard, Auva Speiser, and Elizabeth Raiha
ADVANCES IN DIELECTRIC MATERIALS AND ELECTRONIC DEVICES
Observation of TI-TI Bonding In TI/CU/PT-Supported Rutile TiO2 (110) Surface: AB Initio Calculations 153
Lei Li, Wenshi Li, Han Qin, Jianfeng Yang, Canyan Zhu, and Ling-Feng Mao
Effect of Processing Conditions on Electric and Dielectric Properties of Polymer-Derived SiC Ceramics 165
Chengying Xu
THE 9TH INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGIES FOR MATERIALS MANUFACTURING AND PROCESSING
Study on Energy Utilization of High Phosphorus Oolitic Hematite by Different Ironmaking Technologies 177
Hui Sun, Miaolian Bian, Shichao Chen, Dongyang Ma, Zhicheng Cao, and Daohong Wu
NANOTECHNOLOGY FOR ENERGY, ENVIRONMENT, ELECTRONICS, HEALTHCARE AND INDUSTRY APPLICATIONS
Nanosensors for Detecting Pollutants in Water 187
Shobhan Paul
HYBRID ORGANIC-INORGANIC MATERIALS FOR ALTERNATIVE ENERGY
Electrodeposition of Hybrid Sol-Gel Glass Coatings on 304 Stainless Steel for Corrosion Protection 205
Q. Picard, G. Akalonu, J. Mercado, J. Mosa, M. Aparicio, L. C. Klein, and A. Jitianua
SURFACE PROPERTIES OF BIOMATERIALS
Biofilm Formation on Titanium Alloy Surfaces in a Laboratory Biofilm Reactor 221
Hideyuki Kanematsu, Shun Kanesaki, Hikonaru Kudara, Dana M. Barry,Akiko Ogawa, Takeshi Kougo, Daisuke Kuroda, Nobumitsu Hirai, Hajime Ikegai, and Yoshimitsu Mizunoe
MATERIALS FOR NUCLEAR ENERGY APPLICATIONS
Westinghouse Accident Tolerant Fuel Materials 3
Frank Boylan, Peng Xu, Javier Romero, and Ed Lahoda
Investigations of Capacitor Discharge Welding for the Attachment of Endcaps to Molybdenum-Based Nuclear Fuel Rod Cladding 7
Jerry E. Gould, Cem Topbasi, and Bo Cheng
Evaluation of U3Si2 Fuel Pellets Sintered in an Argon vs. Vacuum Environment 21
Rita Hoggan, Jason Harp, and Lingfeng He
PROCESSING AND PERFORMANCE OF MATERIALS USING MICROWAVES, ELECTRIC AND MAGNETIC FIELDS, ULTRA-SOUND, LASERS, AND MECHANICAL WORK-RUSTUM ROY SYMPOSIUM
Microwave-Augmented Crystallization and Decrystallization in Ceramic Processing -A Phenomenology-Based Commentary 29
Boon Wong
Effects of Elastic Waves at Several Frequencies on Biofilm Formation in Circulating Types of Laboratory Biofilm Reactors 43
Hideyuki Kanematsu, Shogo Maeda, Dana M. Barry, Senshin Umeki,Kazuyuki Tohji, Nobumitsu Hirai, Akiko Ogawa, Takeshi Kogo, Hajime Ikegai, and Yoshimitsu Mizunoe
Resilient Graphitic Carbons from Electro-Thermal Fluidized Bed Reactor 53
Soeren Koester, Eric Salmon, and Carsten Wehling
Heavy Clay Body Properties for Hybrid Microwave Firing 59
Garth V A Tayler, Mike Anderson, and Mike Hamlyn
Effective Permittivity and Microwave Heating Characteristics of Electric Conductor and Insulator (Dielectrics) Mixtures 69
Noboru Yoshikawa
Porous Ceramic/Metal Composite Body for DPF (Diesel Particulate Filter) and the Microwave Heating Behavior 79
Noboru Yoshikawa, Chang Chuan Lee, Naoki Inoue, Shoji Taniguchi, and Sergey Komarov
CONSTRUCTION AND BUILDING MATERIALS FOR A BETTER ENVIRONMENT
Study on Preparation of Portland Cement by Using Coal Fly Ash 87
Hui Sun, Miaolian Bian, Dongyang Ma, Shichao Chen, Zhicheng Cao, and Daohong Wu
Corrosion Behaviour of Steel-Reinforcement in C3H7NO2 S-Admixed Concrete Immersed in Saline/Marine Simulating-Environment 95
Joshua Olusegun Okeniyi and Abimbola Patricia Idowu Popoola
C4H11NO Performance on Steel-Rebar Corrosion in Industrial/ Microbial Simulating Environment 109
Joshua Olusegun Okeniyi and Abimbola Patricia Idowu Popoola
INNOVATIVE PROCESSING AND SYNTHESIS OF CERAMICS, GLASSES AND COMPOSITES
Numerical Investigation of Heat Transfer and Reaction Kinetics during the Self-Propagating High-Temperature Synthesis of Silicon Nitride 123
Venkata V. K. Doddapaneni and Sidney Lin
Synthesis of Carbide Ceramics from Activated Carbon Precursors Loaded with Tungstate, Molybdate, and Silicate Anions 137
Grant Wallace, Jerome Downey, Jannette Chorney, Katie Schumacher, Trenin Bayless, Alaina Mallard, Auva Speiser, and Elizabeth Raiha
ADVANCES IN DIELECTRIC MATERIALS AND ELECTRONIC DEVICES
Observation of TI-TI Bonding In TI/CU/PT-Supported Rutile TiO2 (110) Surface: AB Initio Calculations 153
Lei Li, Wenshi Li, Han Qin, Jianfeng Yang, Canyan Zhu, and Ling-Feng Mao
Effect of Processing Conditions on Electric and Dielectric Properties of Polymer-Derived SiC Ceramics 165
Chengying Xu
THE 9TH INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGIES FOR MATERIALS MANUFACTURING AND PROCESSING
Study on Energy Utilization of High Phosphorus Oolitic Hematite by Different Ironmaking Technologies 177
Hui Sun, Miaolian Bian, Shichao Chen, Dongyang Ma, Zhicheng Cao, and Daohong Wu
NANOTECHNOLOGY FOR ENERGY, ENVIRONMENT, ELECTRONICS, HEALTHCARE AND INDUSTRY APPLICATIONS
Nanosensors for Detecting Pollutants in Water 187
Shobhan Paul
HYBRID ORGANIC-INORGANIC MATERIALS FOR ALTERNATIVE ENERGY
Electrodeposition of Hybrid Sol-Gel Glass Coatings on 304 Stainless Steel for Corrosion Protection 205
Q. Picard, G. Akalonu, J. Mercado, J. Mosa, M. Aparicio, L. C. Klein, and A. Jitianua
SURFACE PROPERTIES OF BIOMATERIALS
Biofilm Formation on Titanium Alloy Surfaces in a Laboratory Biofilm Reactor 221
Hideyuki Kanematsu, Shun Kanesaki, Hikonaru Kudara, Dana M. Barry,Akiko Ogawa, Takeshi Kougo, Daisuke Kuroda, Nobumitsu Hirai, Hajime Ikegai, and Yoshimitsu Mizunoe