Mechanical Engineering (ICOME 5th edition)

<ul><li>Preface</li><li>Chapter 1: Metallurgy and Metalworking</li><li>Briquetting Pressure Roles in Selective Reduction Process of Limonitic Nickel Laterite</li><li>Toughness Recovery of Welded Pipe API 5L Grade B through Quenching and Tempering Treatment</li><li>The Portevin-Le Chatelier Type for 316L(N) SS at Low Deformation Rate</li><li>Mechanical Properties, Microstructural, and Deep Drawing Formability Analysis on the Annealed CuZn35 Brass Alloy for Cartridge Application</li><li>Straightness Geometric Error Assessment for CNC Milling Machine</li><li>Chapter 2: Powder Metallurgy</li><li>Optimization of Mixing Speed Parameter for Homogeneous Cu-Sn Composite</li><li>Investigation of the Dwelling Time and Compaction Pressure Effect on Mechanical Properties and Microstructure of the Cu-Sn Composite</li><li>Chapter 3: Friction Welding</li><li>Friction Stir Welding Process Optimization on 4 Tool pin Geometries with Process Parameters and Shoulder Concave Angle in 6005A-T6 Aluminium Alloy Joining</li><li>Macrostructure and Shear Strength Analysis on Cu-Al Joint of Micro Friction Stir Spot Welding</li><li>Influence of Tool Rotation and Surface Roughness on the Shear Strength of Nylon 6 - SS 304 Dissimilar Joint Resulted by Friction Lap Welding</li><li>The Influence of the Tool Concave Shoulder Angle on Heat Generation in the Stir Friction Welding Process with AA6061-T651 Materials</li><li>Chapter 4: Corrosion and Surface Treatment</li><li>Corrosion Behavior of Hastelloy C-276 in Hydrochloric and Sulfuric Acid</li><li>Formation of Protective and Hardening Coatings on Reinforcing Steels</li><li>The Orientation and High-Quality Effect of Deposit Layer to Surface Roughness on FDM 3D Printed Part</li><li>Application of Psidium Guajava Leaf Extract as an Organic Inhibitor in Acid Solution and Temperature Variation</li><li>Effect of Stand of Distance (SOD) of Abrasive Water Jet Cutting processes on the Corrosion Properties of Material implant Stainless Steel 316L</li><li>Effect of HVOF Air Cap Nozzle Grooves on Cr₃C₂+ 20NiCr Coating Characteristics</li><li>Risk-Based Integrity Management System of Oil Tanker Hull Structure due to Corrosion</li><li>Cladding and Natural Aging of Aluminium Alloy 2024 for Aircraft Application</li><li>Chapter 5: Composite Materials</li><li>Influences Stacking of Basalt-Glass Fabrics Reinforced Epoxy Matrix Hybrid Composites towards Tension Loads</li><li>Experimental and Numerical Investigations on the Tensile Behaviour of Bamboo-Glass Fibres Hybrid Reinforced Polymer Composites</li><li>Durability Study of Glass/Carbon Hybrid Composites Immersed in Seawater for Marine Application</li><li>Experimental Study of Sandwich Strength Materials Made from Banana Fiber, as Advance Materials of the Unmanned Mine Sweeper (UMS) Hull</li><li>Experimental Study of Sound Absorption Coefficient Characteristics of Oil Palm Frond Reinforced Composite</li><li>Effect of Post-Curing Heat Treatment on Tensile Properties of Carbon UD/Vinyl Ester Composite with VARI Manufacturing Method</li><li>Ballistic Performance of Epoxy-Ramie Composite - SiC Layered Body Armor Using Finite Element Analysis</li><li>Effect of Alkali Treatment and Particle Size on Sound Absorption Coefficient of Particleboards Made from Oil Palm Frond</li><li>Effect of Surface Treatment of Tire Rubber on the Tensile Properties of Ground Tire Rubber/Epoxy Composites</li><li>Performance of Tri-Adhesive Joints to Improve the Shear Stress Distribution of Lap Joints</li><li>Chapter 6: Materials and Technologies for Biomedical Applications</li><li>Preparation and Characterization of Hydroxyapatite/Zinc Composites with Alginate for Bone Scaffold Application</li><li>Microstructural Characterization of Polylactide/Poly ?-Caprolactone Blends for Plate Fixation Internal Application</li><li>Numerical Study on the Effects of Coefficient of Friction to the Dynamic Sliding Contact between Bearing and Talar Components of Metal on Polymer Total Ankle Replacement Implants</li><li>Fatigue Detection System Based on Heart Rate and Eye Blink Equipped with Email and Buzzer Alerts to Increase Health Workers Productivity</li><li>Chapter 7: Waste and Biomass Conversion</li><li>Domestic Waste Incinerator Design with Bio-Mass Fuel</li><li>The Effect of Temperature Controller on the Gasification Performance Using Downdraft Gasifier with Three-Stages Gasifying Agent</li><li>Chapter 8: Research and Design of Machine Parts</li><li>Stress and Fatigue Life Simulation of Camshaft with Structural Static ANSYS Approach</li><li>Synthesis Analysis to Improve Coupling Strength of Automatic Coupler</li><li>SAND as Granular Damper Material to Increase Stability Limits during Turning of Steel Pipe</li><li>Normal Modes Study on Half Wing Structure of N219 Aircraft Using Computational Method</li><li>Chapter 9: Thermal Engineering</li><li>Study of Modified Absorber Plate with Aluminium Foam of Solar Water Heating System</li><li>Experimental of the Influence of Blade Pitch Angle Cooler Fan on the Performance of Closed Cooling Water System Gas Turbine</li><li>Effect of Propylene Glycol on Supercooling NaCl-H₂O Solution as PCM to Reduce Energy Consumption in Hybrid Reefer Container</li><li>Chapter 10: Mechatronics</li><li>On-Line Quality Control in the Injection Molding Machine for the Process Statistic of Thermoplastics Material</li><li>The Performance of Magnetostrictive Material for Wind-Induced Vibration Power Generator</li><li>Automatic Number Plate Recognition Application for Metropolitan Toll Road Payment System</li><li>Artificial Neural Network (ANN) Based Meta-Model Design Optimization of Direct-Drive Wheel Hub Motor for an Electric Scooter</li><li>Chapter 11: Quality Control and Failure Analysis in Power Plant Equipment</li><li>Root Cause Failure Analysis of Waterwall Tube Boiler</li><li>Analysis of Cooling Water Quality Improvement to Increase Cooling Tower Efficiency at Kamojang Geothermal Power Plant Unit 1</li><li>Numerical Study Impact of Coal Optimization on the Erosion Rate of the Low Temperature Superheater (LTSH) Pipeline PLTU West Java 2 Palabuhan Ratu 3x350 MW</li></ul>