Mechanical and Electrical Technology IV

Preface and Committees
Chapter 1: Materials Engineering
The Research of the Difference between Small-Strain and Large-Strain Formulations for Shape Memory Alloys
Investigation of Annealing on the Structural and Optical Properties of Chemical Bath Deposited ZnSe Quantum Dot Thin Films
Intergranular Corrosion of Austenitic Stainless Steel
Study on Transformer Silicon Steel Magnetic of Different Joint Forms
Flow Properties of Fluids Confined in Parallel-Plate Nanochannels
Corrosion Behavior of Sm-Based Bulk Metallic Glasses in Salt Solution
Research on Corrosion Characteristics of Mild Steel in Sea Water at Weihai
Friction and Wear Behavior of Textured Al2O3/TiC Ceramic Surface Filled with MoS2 Solid Lubricants
Study on Accelerated Corrosion Electrochemical Behavior of Q235B Steel in Sea Water
Study on the Reflecting Properties of PET Composites with TiO2, Glass Beads and Fluorescent Brightener
Magnetic Analysis of Ferromagnetic Substance in the Process of Rotation Demagnetization
Hot Compression Simulation of Ti75 Alloy Based on DEFORM-3D
Crystal Growth of Ni on Liquid-Solid Interface
Alloying Element Nb Effect on Microstructure of Co-Al-W Superalloy by Vacuum Arc Melting
Study on Controlled Decomposition and Reuse of Waste Thermosetting Phenol Resin Based on Physical Methods
Difference in Electronic Structure between Diamond and Graphite
Numerical Simulation of the Effect of Ethanol on Diesel HCCI Combustion Using Multi-Zone Model
First-Principles Study of TiC(111) Surface
Coulostatic-Based Research on Corrosion Inhibition Mechanism of Three Inhibitors for Hot Dipped Coating Steels
Study and Analysis the Facture Mechanism for Fine-Blanking with Negative Clearance on 60Mn
Compressive Strength Changing Law of Oil Well Cement Paste under Corporate Corrosion of HCO3- and SO42-
The Water Adsorption Isotherm Models on Activated Alumina
Comparative Analysis the Stainless Steel Surface Structure on Fine-Blanking with Negative Clearance and Common Blanking
Micro-Deposition of the Film Material Using Femtosecond Laser Pulse
The Anti Corrosion Performance of the Fracture Surface by Fine-Blanking with Negative Clearance with ASTM-Gr.D
Simulation of the Diameters, Length and Content Effect on the Magnetic Properties of Glass-Coated Magnetic Alloy Microwires
Preparation of UV-Curable Nanocomposite Varnish with High Wear Resistance
The Mo Loading Effect on SCR deNOx Performance for V-W-Mo/TiO2 Catalyst
Tunable Magnetism and Half-Metallic Stability in Si-Doped Hg2CuTi-Type Ti2CoGa Alloy
Tribological Properties and Wear Mechanism of Self-Lubricating Ni-P/PTFE
Research on the Cr (VI) Absorption by Activated Sludge
Precipitation Characteristics of Scaling on Copper and Brass from 0.5mmol/l CaCO3 Solution at 60 degreesC
Dehydro-Aromatization of n-Hexane over Zinc Modified WC/HZSM-5 Catalysts
Synthesis and Characterization of Pt-Sn/WC(O)/C Catalyst for Ethanol Electro-Oxidation
Effect of Corrosion Inhibitor TG201 on Electrochemical Corrosion Behavior of Tubular Steel HP13Cr
Hydrogen Permeation Behavior of 95S3Cr Casing with Wet H2S Environment
Experimental and Numerical Investigation of CO2 Injection into Water-Saturated Porous Media: Effect of Capillary Pressure on Displacement Efficiency
Kinetic Analysis of Paper White Mud Dissolution at Constant pH
The Scattering of Carbon Nanotubes on the Gaussian Beam
Research on the Biofilm Accretion of Flotation Bio-Filter
Homogenization and Melt-Emulsification Techniques for Ibuprofen Particle Size Reduction: Effect of Tween 80 & Sonication
Reconstruction and Electronic Properties of Interface between Carbon Nanotubes and Ferromagnetic Co Electrodes
Network Formation in Various Dispersing Medium of Hydrophobic Colloidal Silicon Dioxide
Tuning Color of Charged Iridium (III) Complexes with a Spiro N,N'-Bidentate Ligand
Synthetic Glass Nanopore for Single Molecule Detection
Effect of Varying Dielectric Constant on Relative Stability for Graphene Nanoribbon Interconnects
Effect of Varying Aspect Ratio on Relative Stability for Graphene Nanoribbon Interconnects
Doping Effect on Crystal Structure and Magnetic Properties of Highly Al-Substituted Strontium Hexaferrite Nanoparticles
Properties of Thermal Conductivity on Polyimide/Clay Nanocomposite Foams
TEM Analysis of Structural Phase Transition in MBE Grown Cubic InN on MgO (001) by MBE: Effect of Hexagonal Phase Inclusion in an C-Gan Nucleation Layer
Dispersion of Multiwalled Carbon Nanotubes with Water-Soluble Polyaniline Blend Poly(Sodium 4-Styrenesulfonate)
Effect of Milling Time on the Structural Properties of Titanium Dioxide Nanopowder
Size Effect of Uniaxial Compressive Strength of Limestone
Effect of ZnO Nanoseed Structure on the Growth Orientation of Vertical Array ZnO Nanorods via Hydrothermal Process
Post-Growth Annealing of (Ga, Mn)As under Sb Capping
Synthesis of Carbon Nanotubes from Palm Oil Precursor by Aerosol-Assisted Catalytic CVD Method
Density of ZnO Nanotip Array Controlled by ZnO Seed Layer
Green Synthesis of Silver Nanoparticles Using Two Lichens Species: Parmotrema praesorediosum and Ramalina dumeticola
Gold Nanoparticle Based Immunostrip Assay Method for Detection of Protein-A
Carrier Transport Enhancement in Bulk-Heterojunction Organic Photovoltaics with Boron or Nitrogen-Doped Carbon Nanotubes
Effect of Micron Size Ni Particle Addition on Microstructure, Thermal and Mechanical Properties of Sn-9Zn Lead-Free Solder Alloy
A Review on the Mechanical and Physical Properties of Natural Fiber Composites
Investigation of Porous Block Porosity on Flow and Entropy Generation inside a T-Micromixer Using Lattice Boltzmann Method
A Fundamental Study on the Prediction of Preheating Temperature of Silicon Nitride Ceramics by Using HPDL
Mechanical Response of Laminated Composite Cylindrical Shell Subjected to Radial Patch Loading
Study of Synthesis of Novel ?-Valerolactone-Based Polyurethanes
Effect of Strain Rate Upsetting Process on Mechanical Behaviour of Epoxy Polymer
Hyperelastic Analysis of High Density Polyethylene under Monotonic Compressive Load
Chapter 2: Applied Mechanic and Mechanical Engineering
A New Method of Eliminating Outliers in Data Processing of Tracked Vehicle Vibration Signal
Optimization of the Frontal Rail Based on Composite Material
Research for the Turning Vehicles ESP Control Performances on the Yaw Elastic Restriction Vehicle System
Study on Particulate Accumulated Characteristics of Diesel Particulate Filter
Performance Improvement and Lightweight of Engine Hood Structure
1.25MW Wind Turbine Vibration Performance Study of the Internal Cabin
The Performance Indexes and the Influence Factor of PCP
Response of Blade Thickness to Hydraulic Performance of Stamping and Welding Multistage Centrifugal Pump
A Novel Micro Check Valves Used for Interstitial Fluid Sampling Device
Friction and Forward Slip in High-Speed Cold Rolling Process of Aluminum Alloys
Rolling Force Prediction Method Based on Fuzzy Identification
Bending Vibration Analysis of Thick Honeycomb Sandwich Panel
Finite Element Analysis of Tube Tower for Vertical Axis Wind Turbine
A New Mistuning Form Existed in Periodic Structure-Force Mistuning
Optimization Research of Process Parameters for Laser Cladding Valve Parts Based on Genetic Algorithm
Finite Element Analysis of the Pump Rigidity
Study on Characteristics of Gas Flow Velocity in Catalytic Converter with Porous
Comparison of One-Unit Ball-Rod-Spring Balancer with Traditional Ball-Type Automatic Balancer
The Contrastive Analysis of Several Radiation Cooling Terminal Devices
Study on the Meshing Feature and Contact Strength of WN Gear Driving in Load Bearing
Overview of the Diagnostic Methods of Engineering Components Damage Based on Modal Analysis
Verification of Surface Finish as an Indicator of Machinability in Drilling of Stainless Steel by DIN 1.4301
Mechanism Investigations of Fluid-Solid Conjugate Heat Transfers for Vehicle Exhaust System
A New Method of Calculating the State Feedback Gain Vector of Vibration Control System
Mechanical Analysis: Solutions to Instantaneous Acceleration and Cushioning Time of Accelerometer's Collision
The Reliability of Solder Joints in Fine Pitch 3-D Stack Package by Taguchi Method
Calculation and Analysis of the Forces Created by Halbach Permanent-Magnet Electrodynamic Suspension
Research on Equivalent Bending Stiffness of Conical Inflated Beam
Failure Analysis and Transmission Parameters Optimization Design of WN Gears Drive
Dynamic Finite Element Analysis and Experimental Study of Rotating Column in Cylinder
Meshing Method of FEM in Large Complex Structural Simulations
Study of Side Thrust of Diesel Piston Based on Time-Domain Finite Element Method
Rotor Profile Generation Method for Twin Screw Compressors Based on Bi-Direction
The Design of New Mechanism of Birdlike MAV
Statistical Calculations of Grinding Abrasive Number Based on Normal Distribution
Lightweight Design and Research of Box Girder for Double Girder Bridge Crane
The Air Tightness Test Method of the High Speed Train
Analyses of Current Situation about Biomass Carbonization Stove
The Finite Element Analysis of Machine Tool Column of NC Gear Shaper Based on HyperWorks
The Calculation Method and Experimental Research on Throttling Pressure Drop during Kill a Well
Meshing Stiffness Analysis of Four Ring-Plate-Type Pin-Cycloidal Gear Planetary Drive
A Modified Model of the Primary Shear Zone for Orthogonal Machining
The Effects Research of Elastic Coupling on Torsional Vibration Test-Bed
Research on Dynamic Characteristics of Implement Mechanism of Mining Excavator
Tool Wear of Diamond Tools in Ultrasonic Vibration Turning Titanium Alloys
Research on Anti-Backward-Tipping Device of Luffing Jib Tower Crane
An Improvement Design Research on the Structure of Precision Grinder
Study of Dual-Fuel Engine Performance with Diesel-Natural Gas
Engine Fault Diagnostic System Based on Non-Linear Support Vector Machine
Experimental Study of Cutter Wear Based on Turn-Milling
The Research of ELID Grinding Effect and Surface Quality on Carbonized Cold-Rolled Steel
Optimization Design for Crank Arc Guide Bar Gathering Mechanism of Crab Claw Type Loading Machine
Research of the Three Coordinates Miniature CNC Milling Machine
Preliminary Research of Crank-Group Driving Mechanism
Analysis of Solid-Liquid Two-Phase Flow in Axial Flow Pump
The Mechanism of the Contact Resistance between Rail and Wheel in Bad Shunting Area
Study on Radial Load in a Centrifugal Pump with Slope Volute Using CFD
Modeling a Finned Tube Evaporator for Engine Exhaust Heat Recovery
Kinematics and Dynamics Analysis of Planar 3-RRR Parallel Robots
Available Heat Energy Analysis from Exhaust of Incinerator on Ship
Development of High Precision Position Stage and its Performance
Clutch Product Rapid Variant Design Based on Tabular Layouts of Article Characteristics
The Calculation Method of Earth-Rock Allocation Balance and its Application for the Pumped Storage Hydropower Construction
The Research of Mechanical Automated Stereo Garage of Automobile
Static and Dynamic Characteristic Analysis of the Tower for Vertical Axis Wind Turbine Based on Finite Element Method
Research on the Influence Factors of Cavitating Jet in Jet Pipe Amplifier Nozzle
Fatigue Analysis of Wind Turbine
An Improved Shear Stress Transport(SST) Model for High Speed Flows
Matching Research on Commercial Vehicle Driveline Based on Cruise
Study on Efficiency Characteristic of Torque Convertor Transmission System Based on Power Split Principle
Research on Spiral Motion of Guided Projectiles Based on Flight Data
The Mechanical Model and Boundary Condition of Separated Zone Water Injection String's Axial Force
Study of Diagnosis Algorithm for Coherence of Fuel Injection of High-Pressure Common Rail Fuel System
Dynamics of Joints with Clearance for a Cantilever Beam Subjected to a Moving Mass
Study on Crack Component Fatigue Life Analysis Based on SIF Fitting
Laboratory Experimental Study on Advanced Water Injection
The Design of Surfactant Multiplex System for Lowering Threshold Pressure
Shear Ram Speed Characterization for Copper Wire Bond Shear Test
Shear Ram Height Characterization for Copper Wire Bond Shear Test
Abrasive Wear Mechanism in Near-Nano and Microstructured WC-Cobalt Coatings
Defective Casting Diagnosing via an Enhanced Knowledge Hyper-Surface Method
Boil-Off Gas Formation inside Large Scale Liquefied Natural Gas (LNG) Tank Based on Specific Parameters
Effect of High Swirl Velocity on Mixture Formation and Combustion Process of Diesel Spray
Numerical Investigation of the Circle Grids Fractal Flow Conditioner for Orifice Plate Flowmeters
Studies of Relationship between Contact Width and Leakage on Large Size of New Metal Gasket
Thermo Mechanical Analysis of SS304 Circular Grid Plate Hard Faced with Colmonoy
Evaluation of Cutting Force and Surface Temperature for Round and Square Member in Laser Assisted Turn-Mill
Squeezing Impact Forces of the Deformation on a Cylindrical Roller
Numerical Investigation on Laser Ablation Characteristics of PTFE in Advanced Propulsion Systems
Mechanical Behavior of Composite Plate under Combined Impact and Internal Pressure
Aero-Thermal Performance of Purge Flow in Turbine Cascade Endwall Cooling
Linear Analysis of Crack Propagation in a Solid Rocket Propellant
High Speed Experimental Study of Friction Induced Vibration in Disc Brakes
Extensive Tracking Performance Analysis of Classical Feedback Control for XY Stage Ballscrew Drive System
Experimental Study on the Hydrodynamics of Swirling Fluidized Bed
Kinematic Analysis of a 2-DOF Planar Parallel Manipulator with Automated Selective Activation Mechanism to Avoid Singularities
Effect of Strain-Rate on Flexural Behavior of Composite Sandwich Panel
Finite Element Analysis of Curvature Precast Polymer Panel for Temporary Support of Tunnels
Comprehensive Study on Variable Pitch Vertical Axis Tidal Turbine
Chapter 3: Electrotechnics and Electrical Machines
Latest Research Progress of Amorphous Motors
Transient Electromagnetic Field Numerical Analysis of Self-Excited Retarder
Design Optimization of a Dual Function Piezoelectric Actuator
Research on a STM32F Based Digital Integral Technology for Rogowski Current Transformer
A Novel Single-Stage PFC Based on Active Clamp Forward Converter
Electric Field Distribution Analysis of +/-1000kV DC Wall Bushing during Polarity Reversal
An Improved Dynamic Surface Control Approach and Applications to the Control of DC-DC Power Converter
Analysis on Electric Field Distribution of +/-1000kV DC Wall Bushing with Considering Space Charge
Study on Reliability of Control and Protective Switching Device
5A 1300V Trenched and Implanted 4H-SiC Vertical JFET
Research on Programmable Logical Relay Protection
Novel Multi-Finger Power HBTs with Non-Uniform Segmented Emitter for Thermal Stability Enhancement
Design of Portable On-Board Charger
Working Parameters Selection of Bladder-Type Accumulator under the Different Conditions
The Study of Movement Encoder with Low Cost and High Performance
The Analysis and Research of Electric Dynamic Load Simulator
Electric Vehicle Charging Station Load Forecasting and Impact of the Load Curve
Research on Vibration of Transformer with DC Bias
New Method to Identify Sympathetic Inrush in Transformer Based on Hilbert Huang Transform
The Impact of Electric Vehicles Fast Charging on the Grid Voltage and Current Fluctuations
Researches on the Characteristics of Vacuum Switching Arc in Short-Gap
Research on BFV-SVPWM Control Strategy for Two Double-Y Shift 30 degrees PMSM Series-Connected System
Analysis of Vibration and Noise in Transformer under DC Bias
An Analytical Method to Calculate the Eddy Current Losses of Transformer Shielding Coil
Development and Application of Low-Speed and High-Torque Permanent Magnet Synchronous Motor
Three-Dimensional Magnetic Field Analysis of Poly-Magnet Line-Start Permanent Magnet Synchronous Motor
Research on Enhanced Magnetism and Demagnetization Armature Reaction of Double Salient Electro-Magnetic Motor
Analysis and Research on Influence of Seam on Power Transformer's Capacity on Restraining DC Bias
Effect of Stator Structure and Field Analysis of a New Type Single-Phase Induction Motor
Design and Experimental of High-Performance Interior PMSM with the Aid of Identical Polarization Embedding
Power Transmission Analysis between Two Flexible Subsystems Coupled by a Stiff Junction
Modal Analysis of 160KVA Dry-Type Transformer Based on ANSYS
Design of Parallel Interleaved-Phase-Shift-PWM Inverters with Voltage Feedback Control
Generation Oscillating Switching Impulse Using Power Transformer
Static and Dynamics Analysis of 2.0MW Generator Frame
Magnet Design of Liquid Metal Magnetohydrodynamic Generator Driven by Wave
Reflection of Conductive Plane Covered by Double Inhomogeneous Plasma Slab
Electromagnetic Field Analysis of Hybrid Excitation Vehicle Generator with Low Voltage and High Current
Electromagnetic Susceptibility Analysis Method of Electro-Explosive Devices
Voltage Waveform Control of Three-Phase PWM Inverter Based on the Output Harmonic Current Feed-Forward Compensation
Multi-Peaked Velocity Spectrum of a AC-Electric-Field-Induced Electrolytic Flow with Microelectrodes
Laguerre Function's Based Model Predictive Control of Three Phase Induction Motor
Electronic Control Unit Design for a Retrofit Fuel Injection System of a 4-Stroke 1-Cylinder Small Engine
Chapter 4: Energy and Power Engineering
State Recognition for Main Bearing of Wind Turbines Based on Multi-Fractal Theory
Characteristic Parameters Research on the Secondary Thermal Ignition of Gasoline-Air Mixture in Cave Depots
Analysis and Design of Conditioning Circuitry Used for Energy Scavenging Device
Conditioning Circuit of Energy Harvesting Device in Substations
Ion-Electron Interaction Contribution to the Helmholtz Free Energy for Fully Ionized Hydrogen Plasma
Research on Integrated Optimization for Production Process and Steam Power System
The Study on 20W/40 Heavy Duty and Super-Charged Diesel Oil
Development of Diesel Engines' Thermal Balance Test and Analysis System
Researched on Maximum Power Point Tracking of PV Power System
Research on Reclassification of Power Users for TOU Power Price Based on Fuzzy Clustering
Solar Wireless Charging Circuit System Designing
Research on Capacitance Current Treatment Methods in Mine High-Voltage Power Grid
Design and Experimental Research on Evaporation-Type DPF Regenerative Burner
Reactive Power Compensation of Distribution Network Based on Immune and Particle Swarm Optimization Algorithm
Cell Performance of ABPBI-Based High Temperature PEM Fuel Cells
Performance Study of Brushless Doubly-Fed Machines in Variable Speed Constant Frequency Wind Power Generation
Research of the Wind Power's Transient Stability
Comparisons of the Power-Feedback MPPT Algorithms for the Photovoltaic Systems
Study on Power Converting System of Liquid Metal MHD Generator Driven by Wave Energy
The Comprehensive Analysis of Grid Connected Wind Power
A New Method to Detect Harmonics and Inter-Harmonics Based on Hilbert Marginal Spectrum
Investigation of Impact Test of Power Battery under Different Environment Temperatures
Analysis and Optimization of Magnetic Energy Converters for Wireless Sensors in Substation
Modal Parameters Identification of Transmission Tower Based on Improved Stochastic Subspace Identification
An Improved Method for Short-Term Power Load Forecasting Based on Fractal Extrapolation
Advanced Metering Infrastructure for Distributed Generation Energy Cooperation Management
Influence of Pressure on the Performance of Heat Exchangers in Ammonia-Water Based Power Cycles
Electricity Energy Saving Assessment for Induction Motors towards Sustainable Energy Practice in Indonesian Small and Medium Industry
A Systematic Approach and Genetic Algorithm Method to Power System Stabilizer Design for Wind Turbine Equipped with DFIG
Electricity Generation of the Water Weighted Sun Tracking System in Sirindhorn Solar Power Plant
Producing Power Using Stirling Engines by Tapping Heat from the Condenser of Power Plants
Research on OPPC Application in Low Voltage Circuit of Liaoning Power Grid
Adjusting the Transient Stability of Power System Using STATCOM-SMES Combined Compensator
Experimental and Numerical Study of the Energy Absorbed with Various Thickness of Thin Rectangular and Square Sections
Chapter 5: Measurements, Monitoring and Sensor
Alignment Method for FOG Single-Axis Rotation-Modulation SINS
Research on Spectrum Domain White Light Interference Demodulation Mechanism of the Optical Fiber Sensing Coal Gas
Application of Image Processing in Plasma Jet Morphological Analysis
An Algorithm for Airborne Conflict Detection Based on Support Vector Machine
A Novel Hardware Implementation for Specular Intensity of Phong Shading Used in Embedded Graphic Applications
Research on Fault Detection Method of Converters
Binocular Vision Measurement of Distance Based on Vehicle Logo Location
Vacuum Circuit Breaker Fault Diagnosis System
Online Fatigue Monitoring System for Steam Turbine Rotor in Power Plants Considering Sub-Synchronous Oscillation
A New Moving Human Detection Method in Color Video Image
A New Camera and Projector Calibration Method Based on Discrete Computation
Texture Defect Detection Using Gabor Filters
Implementation of Fixed Sampling Period M/T Method Based on VHDL
Test Model Designed for Tire Pressure Monitoring Control System
Detection for Heading and Attitude Signal Conversion Equipment of Aircraft Based on Virtual Instrument Technology
Application on Sample Inspection Technology of Highway Electrical and Mechanical Engineering Detection
Leakage Line Detection Based on Improved Grey Absolute Relation Degree Model
Route Identification in Intelligent Traffic System Based on CMOS Image Sensor
Design of Interior Off-Line Temperature Detector for the Ultrahigh Pressure Vessel
Design of Karl Fischer Moisture Virtual Analyzer Based on LABVIEW and MCU
Research and Optimization on the Venturi Tube Dynamic Throttling Element of New Flowmeter
FFU Motors Group Control System Based on Wireless Sensor
Full-Isolation Load Equivalent and Parameter Measurement Instrument Development
A Self-Integrating Rogowski Coil for Lightning Current Sensor
Decoupled Adaptive Tracking Algorithm for Multi-Sensor Measurement Fusion
Research on a Novel Federated Least Square Filter Based on Integrated Navigation
Research on Inductive Oil-Water Interface Level Sensor
A New Anti-Interference Magnet Sensor
The Study of the Principle of Entrainment Effect of the Gas-Electric Measurement
System for Wave Compensation of Deep-Water Exploration Extraction Equipment
An Efficient Sleeping Scheduling for Saving Energy Consumption in Wireless Sensor Networks
Sensor Fault Detection, Diagnosis and Validation - A Survey
Development of Feeding Rate Detection Sensor Based on Wireless Technology
A Research of the Positioning System for Rail Transit Based on Wireless Sensor Networks
A Technical Research of Glass Thickness Detection Based on CCD Displacement Sensor
A Kind of Wireless Sensor Networks Applied in Public Services
Development of Multivariate Measurement and Control System of Threshing Cylinder in Combine Harvester
Beer Brewing Control System Based on DS18B20
Speech Endpoint Detection Based on EMD and Spectral Entropy in Noisy Environments
Flexible Packaging Liquid Milk Quality Testing Instrument Based on Virtual Instrument
The Measurement of Small Cylindrical Pieces Based on Digital Image Processing
Noninvasive Alcohol Detection Using Near-Infrared Spectroscopy Based on Partial Least Squares and Monte-Carlo
Study of Chassis Dynamometer for Hybrid Electric Vehicle
Design of WSN Sensor Node for Solar Photovoltaic Modules
MVC Design Patterns in the Airport Power Supply Monitoring Equipment Troubleshooting of the Application of the System
Design on the Remote Heating Furnace Monitoring System Based on ZigBee Technology
Intelligent Card Heat Meter System Design Based on Singlechip PIC16C72
Research on FFT and FBG Mechanical Vibration Monitoring System
Study on the Testing System of Far-Field Laser Energy Density Distribution
Method of Health Performance Evaluation and Fault Prognostics for Electronic Equipment
Earth Station Tracking SIGSO Satellite: Analysis and Discussion
Super-Heater Tube Wall Temperature Measurement Test and Analysis of 600MW Boiler
An Infrared Thermal Image Processing Framework for Defect Detection of a Metal Part with Rough Surface
Research and Manufacture on the Detection System on the Rifle Curve, Straightness and Roughness of the Firearm Bore Wall
The Method of 1394b Bus Transmission Cable Electrical Characteristics Testing
The Study of Error Separation in On-Site Measurement Based on Bayesian Network
An Improved Mono-Station UWB TOA/AOA Positioning Method
Monitoring Ground Deformation Using Extracted DEM from Stereo-Pair Images of ALOS/PRISM
The Application Research and Experiment Analysis of Wire Rope Fault Detection
Optimization of Cylindrical Ion Traps for Testing Low Mass Ions
Research on Rail Surface Defect Inspection System
Fault Diagnosis for Level Control System Based on IDEF
Study on Precision Scanning Measurement Based on Acousto-Optic Deflection Technology
Study of a New Real-Time Monitoring Method on the Underground Mining Activities
Development of Pumping Wells Electrical Facility Remote Monitoring Terminal Based on DSP
Performance Loss Analysis for Neglecting the Weibull Clutter Texture in Wideband Radar Spread Targets Detection
Performance Analysis of Ground Moving Target Detection for Airborne MIMO Radar
Design of Ultrasonic Measurement System for BRRPO
Study on Detection Methods for Chlorine Precipitation during Biomass and Coal Co-Combustion
An Automatic Measurement for Pipeline Thickness Detection Using Ultrasonic Method
Carbaryl Detection by Gold Nanoparticles Electrodes for Fruit Application Model
Design, Simulation and Characterization of Moly Permalloy Based Electromagnetic Sensor
Defect Detection of Metal Injection Modeling by Micro Computed Tomography
Research of Faulty Sensors Data Reconstructed for Liquid-Propellant Rocket Engines
Design of Remote Pressure Monitoring System
A Review of Vibration Monitoring as a Diagnostic Tool for Turbine Blade Faults
A Novel Lane Departure Warning System Based on Surrounding View
Tracking Using an Inertial Measurement Unit (IMU) and GPS
A Review of Acoustic Emission Technique for Machinery Condition Monitoring: Defects Detection & Diagnostic
Dynamic Monitoring in Ad Hoc Network
UAV Collision Detection Algorithm Design Based on Circle Overlapping Test
Chapter 6: Electronic and Radio Engineering
Flexible Colorization for Greyscale Videos
Readout Integrated Circuits with Pixel-Level ADC for Ultraviolet FPA Applications
Research of Reliable Design of Printed Circuit Board Suited for Smart Grid
Design and Implementation of a 12-Bit 100MS/s ADC
The Research and Design of Card Reader Based on RFID
A Digitally Controlled Oscillator for ADPLL Application
Process Antenna Effect Elimination in Ultra Deep Submicron
Research on FPGA-Based Three-Level Power Amplifier for Active Magnetic Bearings
The Embedded Design of Vibrator Sweep Signal Generator Based on ARM9
A Novel High-Pass Filters Implementation by Fully Differential Op Amp Integrators
Calculation of the Transmission Frequency and Modulation Based on PD5000
The Key Techniques on Micro-Assembly of Micro-Radio Modules
Design of Data Transfer System Based on PCI Express Interface Applied in High-Speed Railway
Research on Tuning Characteristics of High Precision F-P Cavity
Research on Carrier Phase Smoothing in GPS Relative Positioning
Research on Acquisition and Tracing Algorithm of GPS Receiver
Research on TWACS Interference Suppression Based on the RLS Algorithm
The Design of Contactless IC Card Reader in ETC
Design of Redundant Parallel Power Supply Based on Integrated DC/DC Modules
A High-Bit-Rate (64/67) DC-Balance Line Code Scheme Based on Guided Scrambling
A High Accuracy Direction-Finding Method of 2-D Multi-Beams
The Research of Video Signal Capture and Processing Technology in Microteching System
A Fully Integrated 2.45G Semi-Active RFID Tag IC
Design and Implementation of a Fractional Frequency Divider for Dual Mode Wireless Receivers
The Prediction of Indoor Radio Waves Propagation Characteristics Based on FDTD Algorithm
Target Localization for Distributed Multiple-Input Multiple-Output Radar Using Capon Algorithm with Diagonal Loading
Gm-C Complex Band-Pass Filter with Tuning Circuit in 0.18?m CMOS
A 75dB Programmable Gain Amplifier for Dual Mode Wireless Receivers
Analysis of the Impact of Plasma Sheath on GPS Antenna
Design and Experimental Research on a Miniaturized Archimedean Spiral Antenna
Design and Analysis of a CPW-Fed Broadband Conical Conformal Antenna
Analyzing p-MOSFET Lifetime by Employing R-D Model & MOS Device Theory
Current Delivered by an STM Tip in Landauer-Buettiker Formalism
High Speed Data Transmission Using Coding
Design of Quantum Dot Based LASER with Ultra-Low Threshold Current Density
Improved Particle Swarm Optimization (PSO) for Performance Optimization of Electronic Filter Circuit Designs
Design and Analysis of Low Power CNTFET TSPC D - Flip Flop Based Shift Registers
Design and Analysis of N-Type CNTFET Based 2 X 1 Multiplexer
Chapter 7: Computer-Aided Design and Technology
Convection-Enhanced Intratumoral Nanoparticle Drug Delivery Modeling
Screw Algorithm Optimized with Instantaneous Signals
The Research of Quantitative Analysis Methods on Product Form Information Based on the Cross-Section Diagram Set
Coupled Simulation Study on the Working Device of the Excavator Based on VL Motion
Simulation Research on Hydraulic Support Column System Based on AMESim
Simulations and Experiment Analysis of a Piezoelectric Micropump
Feature Modeling and Classification of Halftone Image Based on Statistical Method
Modeling and Simulation for Hydraulic Breaker Based on Screw-in Cartridge Valves
The Simulation Research on Ultrasound Signal Propagation Model for Oil and Gas Pipeline Corrosion
Reverse Design and Application of Irregular Planar Part Based on Image Processing
Development of Road Traffic Safety Education System Based on Virtual Reality Technology
BM3D Denoising Algorithm with Adaptive Block-Match Thresholds
Numerical Simulation of Yarn Untwisting Mechanism in a Pneumatic Splicer Process
Research on the Protection of Out-of-Position Child Occupants Based on the MADYMO Model
The Numerical Simulation Research of Spiral Solid-Liquid Separators
The Research and Analysis of Lexical Analyzer in Prolog Compiler
Energy Difference Based Speech Segregation for Close-Talk System
Research on Fast Localization Algorithm of Low-Quality License Plate Images
Optimal Transformation in Fruit Scans Registration
Research on Localization of Vehicle Backwindow for Binocular Distance Measurement
Design and Simulation of the Novel Parallel Resonant Inverter
Rapid Visualization of Global Ship Tracks Data Based on 3D GIS
The Simulation of Semi-Active Suspension System Based on RBF Neural Network Sliding Mode Control
Self-Tuning Fusion Kalman Filter for ARMA Signals
Seismic Signal Wavelet-Packet Denoising and Fast Spectrum Analysis
The Simulation and Experimental Research on Reverberation Time in Car Speaker Sound Field
Representing the Object, Process and Designer in Designing
Based on Man-Machine Interaction Interface Design of Product
Realization of 3D Embossment Effect Based on a Relief Image
Research of Error Compensation Based on DR/GIS Integrated Navigation
The Development and Research on the Engineering Graphics Based on Computer Technique Era
Life Cycle Assessment of Mechanical and Physical Method Used in Recycling Process of Waste Thermosetting Phenolic Laminated Plastic Based on GaBi Software
Automatically Generate Three-Dimensional Pipelines Based on GeoDataBase MultiPatch Model
Aerodynamic Characteristics Numerical Simulation of the Protective Device of Ejection Seat
Simulation on Parameters Temperature Field by Gas-Solid Coupling in Goaf
Cone-Beam CT Fast Reconstruction Method Based on the Minimum Three Dimensional Convex Hull for Actual Scan Data
Tower Modal Parameters Identification Based on Polymax Method
The Research of Optimal Image Mosaic Method Based on Wavelet Transform
ABS Simulation System of Automobile Based on Virtual Technology
Agricultural Transport Vehicle Maintenance Cycle Optimization Analysis and Modeling
Design and Simulation of a Type of Four Degrees of Freedom Parallel Robot
The Evaluation and Algorithm of CNC Machine Tool Module Combination Configuration Program
The Comprehensive Risk Analysis of Dam-Break Consequences Based on Numerical Simulation
Priority Weighted Fitness Model in Networks
Image Restoration Method Based on Pre-Filtering for Cone-Beam Computed Tomography
A Mutation Ant Colony Algorithm for the Generalized Assignment Problem under the Special Constraints
Technology Mapping for Heterogeneous FPGA in Different EDA Stages
Query Optimization Based on the Simulated Annealing and Particle Swarm Optimization
A Novel Image Watermarking Scheme Based on MCA Neural Networks
Research on Distribution Algorithm of Parking Lot Spaces
Modeling Method Based on Subspace Identification for Lime Kiln Calcination Process
Application of Differential Evolution Algorithm for Calibrating Design Seismic Response Spectra
Development of Automobile Simulative Teaching System Based on the ZigBee Technology
Optimized Spatial Query for Data Integration Based on Semantics
Mathematical Modeling and Experimental Research on Scroll Expander
A Mathematical Model of Single Grain Forces in Grinding Process
QoS Routing Algorithm Using Competitive PCNN
Integration Design of Space Structure Based on CIS
Adaptive Time Delay Estimation Based on Robust Cyclic Correlation Estimator
The Research of Digltal CR Medicine Image Adapitive Enhancement Method
Research on Distributed Resource Management System for Product Design
Simulation Study on Energy Feedback for Flame-Proof Integrative Variable-Frequency Motor
Study on Real-Time Simulation on Hardware-in-the-Loop Platform for Single-Side Wheel Steering by Wire with dSPACE and Simulink
Design, Simulation and Optimization of Electrothermal Micro Actuator
Avionics System Simulation of General Aviation Aircraft Based on HLA
The Reseach on the Environment Factors of the Infrared Radiation for the Targets on the Ground
Configurable Software Development Environment Design for Measurement and Control System Based on Virtual Instruments
The Modeling and Simulation of Induction Motor Control System Based on Stator Flux-Oriented
Simulation and Analysis for New Contact System of Control and Protective Switching Based on Ansoft Maxwell
The Modeling and Simulation of Super-Capacitor in Diesel Engine Starting Process
Numerical Simulation for Fire Smoke of Subway Cross Transfer Station
Numerical Calculation for Complex Transcendental Equation
Different Variances Used for Analyzing the Noise Type of Atomic Clock
Log Secure Access and Transmission Technology Research in a Virtual Environment
Study and Analysis Texture Mapping Technology Based on OpenGL
PWM Component Design Based on Avalon Specification
On-Ramp Fuzzy Metering and Simulation in Urban Expressway
An Improved Directed Acyclic Graph Support Vector Machines Based on Inter-Cluster Separability Measure in Feature Space
Design of Double Delta-Doped Al0.22Ga0.78As/In0.22Ga 0.78As Pseudomorphic HEMTs
Modeling and Characteristics Investigation of Three-Phase Step Motor Based on Matlab/Simulink
Simulation Analysis of Three-Phase Inverter DC Link Current
Path Planning for Ground Simulation Objiect Based on A* Algorithm
Modeling and Simulation of PV Cell and its Application of MPPT
DOA Estimation Based on the Multipath of the MIMO Radar Target
A Novel Hybrid Algorithm with Marriage of Particle Swarm Optimization and Homotopy Optimization for Tunnel Parameter Inversion
Study on the Location Method Based on Seismic Wave Detection
Compensating Impact of the Roll Variation of Airborne Platform on Laser Point Cloud from Airborne LiDAR
Deposit Digitizing for JiaYaShan Ore Block in LanPing Pb-Zn Mine
Research on Three-Dimensional Mechanical Model Exhibitation System Based on WebGIS
The Virtual Manufacture of a Kind of Corn Stubble-Smashing Machine and Shallow Analysis
Numerical Simulation of Impact Tension for Mooring Cable of Underwater Monitoring Platform
A New Method of Integrate Simulation Based on ADAMS and Pro/ENGINEER
An Improved Slope Classification Mapping Method
Numerical Simulation of Pressure Limits of Gas Storage in North Area of Lamadian Oilfield
Analysis of LDMOS for Effect of Fingers, Device-Width and Inductance (Load) on Reverse Recovery
Numerical Investigation of Turbulence Models for Free Jet Flow
Numerical Investigation of Turning Diffuser Performance by Varying Geometric and Operating Parameters
Experimental and Numerical Investigation on Flowfield of Film Cooling from Multiple Holes
Determination of the Significance of Tolerance Parameters on Robot Performance Using Taguchi's Tolerance Design Experiment
Numerical Simulation of Combustion for Freely Falling Gelled Fuel Droplets under Normal Gravity Conditions
Modeling and Simulation of System Dynamics for Spacecraft Propulsion System
Design and Simulation of High Spectral Purity Numerically Controlled Oscillator
Mathematical Modeling of Industrial Heat Exchanger System
Matlab Routines Used for Real Time ETL Method
Influence of Rotation Speed on the Sterilization of a Steamed Liquid Food Can Using Numerical Simulation
Hardware-in-the-Loop Simulation for Automatic Rack and Pinion Steering System
Identification of MR Damper Based on Normalized Bouc-Wen Model Using Neural Network
Simulation of Mixed Convection around a Square by Using LBM
Explicit Dynamic Simulation of High Density Polyethylene Beam under Flexural Loading Condition
Chapter 8: Control and Automation
Design of a CANopen Slave Node Based on AT90CAN128
PSO-Based State Feedback Control of Flexible Spacecraft for Attitude Tracking and Vibration Suppression
Research on Synchronization Control of Dual-Motor Driving for Large Rotary Car Dumper
Sliding Mode Controller Based on Fuzzy Neural Network Optimization for FSPM
Research of Hanging Rail Car Network Control
Achieving High-Performance Bulk Silicon Electrothermal Actuator on CMOS Substrate
Research on Control Strategy and Control Plan of Highway Monitor System
Discussion on the Garbage Disposal Control System Based on DCS
Uncertain Chua System Chaos Synchronization Using Single Variable Feedback
An Ordering Approach Based on Evaluative Function for Rectangular Packing Problem
Study on Twin-Rotary Motion Control System Based on Siemens Technology CPU
Design of Intelligent Control Billboards Based on MCU
Logic-Based Switching Adaptive Control of DC-DC Buck Converter
Control Strategy for Input-Parallel Output-Parallel DC/DC Converters with Output Current Sharing
Plate Width Control Based on Neural Network in Hot Mill
Research on Use Control Strategy of New Types of Vehicles
Quick Motion Path Plan for Joint-Robot to Pick Tomato under Free-Obstacle
The Research Status and Development Trend of Fault Diagnosis System for CNC Machine
Discrete Time Sliding Mode on Model Reference Adaptive System Based Sensorless Induction Motor Drive
Ball-Based Surface Machining System Used in Non-Contour Control
Application of a Position-Force Control Method in a Master-Slave Teleoperation Construction Robot System
Research on Cooperation Localization and Mapping for Hoisting Multi-Robot System
No Steady-State Error Tracking Control of Multi-Axle Steering Vehicle
Robust Control for Enhancing Anti-Interference Performance of Multi-Axle Vehicle
The Optimized Point Stabilization Control for Robots Based on Bezier Planning
The Implementation of the Air Jet Loom High-Precision Weft Insertion Control System Based on FPGA
AMPpred: An On-Line Predictor Design for Automated AMP Recognition
Inverse Kinematics and Dynamics of a 3-DOF Spatial Parallel Manipulator
Study on Velocity Smooth Method for Five-Axis CNC
Welding Robot Applied in Delong Heavy Truck Weld Line
An Approach to Automatic Great-Scene 3D Reconstruction Based on UAV Sequence Images
Globally Exponential Synchronization for the Genesio-Tesi Chaotic System via Feedback Control with Two States
Nonlinear Coordinated Control for SVC and Generator Excitation Based on Sliding Mode Dynamic Surface Method
The Scheduling of the Elevator Group Control System Modeling and Simulation Based on PSO
Adaptive Control of Hyper-Chaotic Systems Based on Dynamic Structure RBF Neural Networks
A Novel Digital Governor for Diesel Engine Based on Nonlinear PID Strategy
Smart Slave Station Design of PROFIBUS-DP Based on DPC31
The Rotor Speed Control of 5MW Wind Turbine under Rated Wind Speed Using Adaptive-PID Controller
EBD Control Research on Bisectional Roads for Electric Vehicles on Energy Regenerative and Feedback Friction Integrated Braking
A Multiple Criteria Decision Method for Selecting Maritime Search & Rescue Scheme
Application of Variable Blade Pitch Control on Improving the Performance of Vertical Axis Wind Turbine
Design of Emergency Power Supply Control System for Seismic Station
Automatic Radar Waveform Recognition Using SVM
Electric Pitch Control System Based on Fuzzy Control with Variable Region
Study of Angle Control on Double Micro Emitter
Dynamic and Control Strategy of Payload Motion for Deployment System
Interoperable CNC Machine via Function Block and STEP-NC Data Model for Milling Operation
Modeling and Fuzzy Control of a Crude Oil Preheating Furnace
Developing a Feature-Based System for Automated Machining Feature Recognition (ISO 10303 AP 224) of Prismatic Components
An Optimization Harmonic Elimination Control Technique for Cascade Multilevel Inverter
Theoretical Analysis of Friction Compensation Using Sliding Mode Control
A Review on Fault-Tolerant Control for Single-Link Flexible Manipulator System
Development of Antilock Braking System Based on Various Intelligent Control System
Ladder Logic Diagram Development for Programmable Logic Controllers via S-Method
Chapter 9: Manufacturing Processes and Technologies
Design Research on Low Speed and Overloaded Transmission System Based on Design Principle of Reverse Transformation
Natural Ventilation in Workshop with Different Horizontal Arrangement of Heat Source
Influence of Drawing Temperature and Die Clearance on Wall Thickness of AZ31B Deep Drawn Part
Recent Development of Stacked Injection Molding
Wet-Etching Characteristics of <111> Orientated Silicon and its Application
Influence of Substrate Bias Voltage on Properties of Medium-Frequency Magnetron Sputtering WS2 Soft Coatings
Computational Model of Work Roll Temperature Distribution during Hot Strip Rolling Process
Experimental Investigation on Micro Electrochemical Milling of Nickel-Based Superalloy
Recent Development of the Bi-Color Injection Molding
Multilayer Masking Technique for Deep Isotropic Silicon Wet Etching
The Development of Hydraulic Mulberry Shoots Trimmer Intended for Micro-Farming Equipment
Study and Investigation on the Mach of Impeller Outlet and Diffuser Inlet in Stamping and Welding Centrifugal Pump
Soft Start Design of Controlled Transmission for Belt Conveyor
Study on Tooth Profile Errors of Flexible Wheel Cold Rolling Machining
The Gray Correlation Analysis of the Surface Medium Character of Adhering Casing
Coal Particles Cleanout Technology in Coal Bed Methane Wells
Machine Slideway Wear to the Precision of the Whole Machine Impact
Numerical Predictions and Verifications for Hydrodynamic Performance of Bidirectional Tidal Stream Turbine
Development of Energy-Saving Water and Electricity Separation Electromagnetic Heating Sink
Design of Transformer Silicon Steel Cutting Line Drive System Based on Friction Compensation
Microwave - Induced Oxidation Progress for Treatment of Imidacloprid Pesticide Wastewater
Process Parameter Determination of AZ31B Sheet Forming under Mechanical Press
Drawing Behaviors of ME20 and ZE10 Sheets under Mechanical Press
Numerical Simulation of Coal Oil Water Slurry Gasification Process in New-Type Coal Water Slurry Gasifier
Galvanostatic Removal of Chlorides in Cast Iron Artifacts
Biocide Screening of Secondary Effluent of Sewage Treatment Plant directly Reused in Power Plant Circulating Cooling Water System and the Study on its Properties
Leveling-Based Kanban Calculation in Production System
Pump Concrete Construction Technology
Research of the Operating Parameters from Reducing Industrial Water Conductivity through Electro Sorption Technology
Development of Assisted Software for TOFD Testing
Design and Experimental Research on Isolation Mechanism for Opto-Electronic Platform in Moving Carries
The Effects of Parameter Settings on Shrinkage and Warpage in Injection Molding through Cadmould 3D-F Simulation and Taguchi Method
Performance Analysis of Wet Compression Process under Critical Conditions of Water Injection
Sub-Index Derivation of Welding Health-Hazard Index (WHI) for Small and Medium Enterprises (SMEs) in Malaysia
External Setup in SMED Improvement in an Injection Molding Manufacturing Company
Comparison of STEP-NC with ISO6983 in Terms of Manufacturing Interoperability
Trend in Sustainability of Facility Design and Production Planning in Manufacturing
E-Manufacturing Challenges and Enablers
Integrated System for Denture Design and Manufacturing
Dynamic Response of Laminated Composite Cylindrical Shell Subjected to Pure Impact
Chapter 10: Miscellaneous Researches for Tecnical Sciences
The Effects of the Parameters on the Performance of HT-PEMFC
Characteristics of Heat Dissipation from a Block Heat Source Module in a Three-Dimensional Cabinet to Ambient Natural Convective Air Stream
Considering the Influence of Chemical Reactions between Detonation Products on Specific Heat Ratio Calculating of the TNT Explosive with Small Explosive Charge Volume Ratio
Fractal Character of Structural Control on Uranium Mineralization in South China
Research on System Reliability of the Minghe Aqueduct in the Middle Route Project of the South-to-North
Interference between the Gas Wells in the Method of the Pesudo-Pressure
Comparison Research of Street Lamps: Characteristic Parameters and Lighting Performance of Light-Emitting Diodes, High Pressure Sodium Lamps and Ceramic Discharge Metal Halide Lamps
Comparative Analysis on Noise Processing of Vacuum Switching Arc Images
Technical Measures on Decreasing Harm to Slope Stability in Chamber Blasting
The Atmospheric Propagation Simulation Characteristic of the Solar Blind Ultraviolet Light
Improved Grey Correlative Method for Risk Assessment on Mine Ventilation System
Using Grey System GM(1,1) Model to Predict the Drug-GPCRs Couples
The Research on the Model for Calculating Relative Acoustical Amplitude on Interface I Based on Attenuation Theory of Acoustic Wave
Study on Calibration Technique of Commercial Vehicles SCR System Based on MAP Diagram
Wavelet Based Separation for Synthetic Topographical Characterization of Surface Prepared by Abrasive Water Jet
Bionic Shape Design of Quantify Products Based on Genetic Algorithm
Solar Straight Thermal Circumfluence Closed-End Seawater Desalination System Analysis
A Similarity Measure between Fuzzy Sets
An Inclusion Measure of Fuzzy Sets and its Properties
Exergoeconomic Analysis of Parallel Polygeneration System with CO-Riched Gas once through
Risk Assessment of Transmission Lines Based on Complex Network and Fuzzy Probability
Comparison of Treatment Method of Plane Nodes in Truss Structure of Transmission Tower
The Design on the Improvement of the Electric Scooptram's Cable Arrangement Device
Change of Landscape Pattern and its Impact in the Distribution Region of Tetraena mongolica Maxim.
Research and Analysis of the Economy and Environmental Benefits of Electric Propulsion Systems in Marine
Power Economic Dispatch Problems Considering Prohibited Operating Zones and Spinning Reserve: A Hybrid Differential Evolution
Analysis on Slagging Property of Coal-Fired Boiler and the Countermeasures
The Study on Establishing the Baseline Mode of Coal Mine Area Soil Heavy Metal Pollution
A Study on Cumulative Effect of Production Blasting Vibration on Slope Failure in Xiaolongtan Coal Mine
Research on Tidal Drainage Effect of Confined Aquifer
The Analysis on the Tectonic Subsidence of Linnan Sag Located in Huimin Sag during the Depositional Stage of Es4
Study on Geological Structural Characteristics in Zhaoguan Mine Field
Near Infrared Cut-Off Characteristics of Various Perovskite-Based Composite Films
A Multi-Agent Model for Supply Chain Based on Coordination Center
Using Dbcupe Topology for NoCs
Layer-by-Layer Surface Modification of Fruits with Edible Nano-Coatings
Self-Assembly Nanofabrication via Mussel-Inspired Interfacial Engineering
Fuzzy Comprehensive Evaluation for IT Project Risk Management
The Application of BIM Model in M/E/P Construction Coordination
Group Technology Utilization inside New Software Application
Disaster Management Issues in Ad-Hoc and WSNs with Healthcare and Communications Viewpoints
Airline Revenue Management: Optimization Using Origin-Destination Strategy Controlled by Nested Heuristics
Manufacturing and Innovation Ability Education of University Students Majored in Mechanical Engineering
Audio Watermarking Based on Wavelet Transform
Attendance System Based on Biometric Security
Case-Based Expert System to Support Electronics Design in Mechatronic System
Mazdak Technique for PSNR Estimation in Audio Steganography
Behavior of Pulverized Coal Combustion in Air and in O2/CO2 Condition