Materials Science, Testing and Informatics VI

<ul><li>Preface, Committes, Conference Secretariat and Sponsors</li><li>Examination of the Microstructure of Findings from Bronze Age</li><li>Examination of the Microstructure of the Findings from Cannon Foundry Sarospatak</li><li>Nitrocarburising of Low Alloyed Case Hardening Steels Applying Three Different Temperatures</li><li>The Relation between the Surface Tension and the Bulk Properties of Diluted Silver Based Melts</li><li>Bone Formation with Nano-Hydroxyapatite from Eggshell</li><li>Structural and Mechanical Properties of Milled Si₃N₄/CNTs Composites by Spark Plasma Sintering Method</li><li>Calculation of Elastic Energy Contributions in Single Crystalline Cu-11.5wt%Al-5.0wt%Ni Shape Memory Alloy</li><li>Advanced Hetero-Modulus and Hetero-Viscous Complex Materials</li><li>Effect of Processing Conditions on Microstructure and Mechanical Behaviour of Metals Sintered from Nanopowders</li><li>Abrasive Wear Testing of Si₃N₄ Ceramic Composites</li><li>Production and Examination of Colour-Galvanized Steel Test Sheets by Modern Analytical Methods</li><li>Infiltration Characteristics and Compressive Behaviour of Metal Matrix Syntactic Foams</li><li>Hydrogen Storage, Microstructure and Mechanical Properties of Strained Mg₆₅Ni₂₀Cu₅Y₁₀Metallic Glass</li><li>Development of Thermally Conductive Polymer Materials and their Investigation</li><li>Incremental Forming: An Innovative Process for Small Batch Production</li><li>Examination of Aluminium Based Automotive Casting</li><li>A Method for Complete Characterization of the Macroscopic Geometry of Grain Boundaries</li><li>Integrity Assessment of Power-Plant Structural Elements Using Fracture Mechanics</li><li>Thermal Induced Phase Transformations in Duplex Stainless Steel</li><li>A Simplified Determination of Creep Properties of Steels by Measuring their Crack Opening Displacements (COD) at Elevated Temperatures</li><li>The Experiences with a Travelling Magnetic Field (TMF) Stirrer</li><li>Development of a Novel Pvt Measuring Technique</li><li>The Effects of Heat Treatment and Deformation on the Martensitic Transformation of FeMn (Cr) Steels</li><li>On the Role of Phenomenology and Dislocations in Modelling of Portevin - Le Chatelier Effect</li><li>Estimation of Thermal Boundary Conditions by Gradient Based and Genetic Algorythms</li><li>Scaling Cellular Automaton Simulations of Short-Range Diffusion Processes</li><li>Development of Complex Analytical Model for Optimizing Software of Wire Drawing Technology</li><li>Loading Simulations of Carbon Nanotube Junctions</li><li>Validation of New Mathematical Model of Flank Wear by Different Methods</li><li>Effect of Supporting Roll Setting on the Inner Structure of Cc Slabs</li><li>
<i>In Situ</i> Synthesis of a Wear Resistant Layer on the Surface of Low Carbon Steel Produced by Laser Melt Injection Technology</li><li>Effect of Different Parameters on the Stability of Femur Neck Fixing</li><li>Dependence of the Surface Roughness and Localization Factor Parameters on the Background Correction of AFM Images: A Thin Film Characterization Study</li><li>X-Ray Diffraction Measurements of Residual Stress Induced by Surface Compressing Methods</li><li>Preparation of Microcapsules for Self-Healing Polymers</li><li>On the Fabrication Parameters of Buried Microchannels Integrated in In-Plane Silicon Microprobes</li><li>Development of PA6/HDPE Nanocomposite Blends</li><li>The Influence of Impurity Content on Thermal Stability of Low Stacking Fault Energy Silver Processed by Severe Plastic Deformation</li><li>Microstructure and Thermal Stability of Copper - Carbon Nanotube Composites Consolidated by High Pressure Torsion</li><li>Single, Binary and Ternary Ion Exchanged Zeolite as an Effective Bioactive Filler for Biomedical Polymer Composites</li><li>Development of Nitinol Stents: Etching Experiments</li><li>Analysis of Applicability of the Hollow Carbon Fibres for Self-Repairing Composites</li><li>Preparation and Characterization of Multilayer Graphene by Mechanical Milling and Related Applications for Ceramic Composites</li><li>Development of Carbon Nanotube Reinforced Conductive Polymer Composites for PEM Fuel Cells</li><li>Microstructure and Phase Analysis by TEM in Cu-Hf-Ti Alloys</li><li>Nanostructure Layer Formation on Cu-Zr-Al Alloy during Laser Remelting</li><li>Standardized Investigation Methods of Self Compacting Concrete and Effect of Sand Content on Properties in Fresh State</li><li>Investigation of Mechanical Properties and Crack Propagation Behaviour of Hybrid Composites with Epoxy Resin Matrix</li><li>Modelling Possibilities of the Medieval Bloomery Process under Laboratory Conditions</li><li>Mechanical Behavior of Bioactive TiC Nanocomposite Thin Films</li><li>Analysis of the Creep Behavior of Polypropylene and Glass Fiber Reinforced Polypropylene Composites</li><li>Studying of Microstructural Effects of Surface Rolling in Materials of Railway-Car Wheel Axles by EBSD and Non-Destructive Magnetic Evaluation</li><li>On the Relation between Stress Relaxation and Constant Strain Rate Tensile Behavior for Linear Viscoelastic Materials; An Engineering Approach</li><li>The Role of the Displacement Reaction in the Production of Surface Composite Layer</li><li>Impedance Analysis of Silicone Rubber Filled by Electrically Conductive Nanoparticles</li><li>Investigation of Mixing Processes of Polymer Composites</li><li>Application of Risk-Informed Inspection Strategy to Improve the Lifetime and Efficiency of Cleaning Pigs</li><li>Influence of Composition and Grain Size Distribution on the Properties of Limestone and Dolomite Asphalt Fillers</li><li>New Advanced SiC Ceramics Based on Natural Biomaterials</li><li>Effects of the Cooling Rate on the Acoustic Properties of Pb-10Sn Solder</li><li>Surface Modification of PDMS Based Microfluidic Systems by Tensides</li><li>Microstructure Comparison of Soldered Joints Using Electrochemical Selective Etching</li><li>Glass Forming Ability of Bulk Amorphous Materials in Cu-Zr-Ag Ternary Alloy Systems</li><li>Development of Ferritic-Pearlitic, Pearlitic and Spheroidite Initial Structures for Simulating the Austenitization in Unalloyed Steels</li><li>Quantitative Metallography of Microstructure of Austenitic and Transformed States in Microalloyed Steels</li><li>Stent Fracture Analysis</li><li>Development of Electrically Conductive Polymers</li><li>Effect of Organic Additives on Friction Properties of Clay Based Compounds</li><li>Correlation between Milling Parameters, Structural and Mechanical Properties of Nanostructured Austenitic Y₂O₃ Strengthened Steels</li><li>The Hardness Control in the Coated Surface Layer</li><li>Evaluation of XRD Analysis of Amorphous Alloys</li><li>Observer Based Leakage Detection of Hydraulic Cylinder Applied in Rolling Mills Electro-Hydraulic Gap Adjustment System</li><li>Evaluation Methods of Antimicrobial Activity of Plastics</li><li>Development of Nitinol Stents: Electropolishing Experiments</li><li>Intercrystalline Cracking of Austenitic Steel during Brazing</li><li>Accurate Calculation of the Non-Variant Points of Equilibrium Phase Diagrams by Using the ESTPHAD Method</li><li>Recrystallization of Pure Copper Investigated by Calorimetry and EBSD</li><li>Laser Cutting of Small Diameter Nitinol Tube</li><li>The Effect of Multiple Forging and Cold Rolling on Bending and Tensile Behavior of Al 7075 Alloy</li><li>Investigation of the Microstructure of Al/SiC(Ni)_pComposites</li><li>Kinking Resistance of Guidewires</li><li>Technological Investigation of Plated Aluminium Sheets</li><li>Application of Specimen Reconstitution to Evaluate the Ageing of Nuclear Pressure Vessels</li><li>Preparation and Study of Li₆Y(Bo₃)₃ and Li₆Gd (Bo₃)₃ Double Borates</li><li>Design of Trussed Steel Towers According to the Eurocodes</li><li>On the Effects of Mechanical and Thermal Treatment Strategies Regarding the Grain Boundary Structure of Polycrystalline Copper</li><li>Complex Study of H-Induced Structural Rearrangements in FeZr Glasses</li><li>Examination of Crystallization of Low Melting Point Alloys for Miniature Casting</li><li>
<i>In Vivo</i> Failure Phenomena of Ultra-High Molecular Weight Polyethylene Acetabular Cups</li></ul>