Materials Science, Testing and Informatics V

<ul><li>Editorial Board</li><li>Committees and Sponsors</li><li>Preface</li><li>Effect of Air Humidity on the Mechanical Properties of <i>In Situ</i> Polymerized Cyclic Butylene Terephtalate Matrix Composites</li><li>Cold Deformation Effect on Microstructure and on the Hydrogen Permeability of Low Carbon Al-Killed Steels</li><li>Hot Ductility Variations of ST52-3 Continuously Cast Steel within the Cast Strand</li><li>Mechanochemical Phenomena during Fine Comminution of Clay Minerals for Ceramic Bricks and Roof-Tiles</li><li>Investigation of the Weldability of the Self-Reinforced Polypropylene Composites</li><li>Study of Aluminium-Titanate Based Ceramics in Fe₂O₃-Al₂O₃-TiO₂ System</li><li>The Transformation of Added Vegetal Waste Materials during Clay Brick Firing</li><li>Correlations between Combustion Type Additives and Expansion after Extrusion of Clay Bricks</li><li>Fatigue Crack Growth Examinations on Austenitic Stainless Steel in Corrosive Environment and at Elevated Temperature</li><li>The Role of the External and Internal Reinforcing on the Structural Integrity of Industrial and Transporting Steel Pipelines</li><li>Fatigue of Laserbeam Welded Joints of High-Carbon Steel Strips</li><li>Examination of Tile Industrial Usability of High-Quartz Content Clay</li><li>Injection Molding of Degradable Interference Screws into Polymeric Mold</li><li>A Method for the Approximate Determination of the Specific Material Properties of Metals under the Extreme Conditions of Fast Deformation</li><li>The Effect of Pre-Electron Beam Irradiation of HDPE on the Thermal and Mechanical Properties of HDPE/PET Blends</li><li>The Effect of Electron Irradiation on the Mechanical Properties of MWCNT/Carbon Fiber Reinforced Hybrid Nanocomposites</li><li>Rapid Tooling Technologies in the Processing of Thermoplastic Polymers</li><li>An Experimental Study on the Effect of Aqueous Hypophosphite Pre-Treatment Used on an Aluminium Alloy Substrate before Electroless Nickel Plating</li><li>Alloying Effects on Wetting Ability of Diluted Ag-Based Melts on Ceramic Substrates</li><li>Investigation of Noble Metal Nanoparticles (Ag, Au, Pd, Pt) Produced by Chemical Reduction</li><li>Development of Multifunctional Silicon Nitride Based Nanocomposites</li><li>Aptitude for Cold Rolling of Laser Welded Joints and their Environment in the Case of Steel Sheets</li><li>Flame Retardant Polyethylene Terephthalate Fibers Added with Melamine Based FR Additive</li><li>Development of Polymer Coatings for Coronary Stents</li><li>MEMS-Compatible Hard Coating Technique of Moveable 3D Silicon Microstructures</li><li>Evaluation of Cooling Characteristics of Quenchants by Using Inverse Heat Conduction Methods and Property Prediction</li><li>Processing of Nano Hydroxyapatite from Eggshell and Seashell</li><li>Hetero-Modulus Nanoparticles Reinforced Corundum Matrix CMC with Extreme Wear and Thermal Shock Resistances</li><li>Unique Features of Ultrafine-Grained Microstructures in Materials Having Low Stacking Fault Energy</li><li>Effect of the Infiltration Pressure on the Properties of Composite Wires</li><li>The Change of the 3D Printing Product Mechanical Properties in the Function of Different Post-Treatment</li><li>Nano-Mechanical and Surface Morphological Properties of TiN Coating Produced by PVD on Tool Steel</li><li>Third Neighbor Analytic Tight-Binding Solutions for Electronic Structure of Carbon Nanosystems</li><li>Nano-Micro Pigment Composites for High Performance Paints</li><li>Role of the Laser Focus Position in the Laser Beam Cutting of Thin Stainless Steel Sheets</li><li>Electrospinning - A Candidate for Fabrication of Semiconducting Tungsten Oxide Nanofibers</li><li>The Workability of Bulk Nanostructure Material</li><li>Infiltration Characteristics of Carbon Fiber Reinforced MMCs</li><li>Tribology Study of Silicon Nitride-Based Nanocomposites with Carbon Additions</li><li>Alloying and Amorphization by Surface Mechanical Treatment</li><li>Analysis of the Polymer Coatings of Coronary Stents from the Aspect of Drug Absorbing and Eluting</li><li>Effect of Crucible Diameter and Wall Roughness on the Melt Flow Generated by Rotating Magnetic Field</li><li>Production of Polymer Nanofibers Containing Hydroxyapatite by Electrospinning</li><li>Production of Single Crystal Thermoelectric Bismuth Telluride Alloys</li><li>Dynamic Mechanical Tests on Magnesium Catalyzed Cast Polyamide 6 Composites Having Different Additives</li><li>Investigation of the Influence of Surface Strengthening Technology on the Material of Railway Car Wheel Axles</li><li>Stent Retention Measurement</li><li>Measuring of Equibiaxial Tension of Rubber-Like Materials by Optical Method</li><li>Qualitative and Quantitative Analysis of Boron Content Precipitates by FEG-SEM and EDS Methods</li><li>Effect of Texture on Hydrogen Permeability in Low Carbon Al-Killed Steels</li><li>Grain Boundary Investigation of AISI 304 Type Steel Using EBSD</li><li>Mechanical Testing of Si₃N₄/SiC/Graphite Ceramic Composites</li><li>Laser Treatment of Cast Iron Engine Cylinder Bore with Nanosecond Laser Pulses</li><li>Magnetic Detection of Creep Deterioration</li><li>Measuring the Heparin Binding Capability of Polyurethane-Coated Stainless Steel Stents with a Label-Free Biosensor</li><li>Trackability and Flexibility of Coronary Stents</li><li>Compositional and Stress-Sensitive Factors during the Thermopower Characterization of Single Phase Crystalline and Glassy Alloys </li><li>Grain Boundary Engineering of Metals by Thermo-Mechanical Treatment</li><li>Nondestructive Inspection of Ductile Cast Iron by Measurement of Minor Magnetic Hysteresis Loops</li><li>Textiles Dynamically Influenced Drapability</li><li>On Modeling of Portevin - Le Chatelier Effect</li><li>Study of Non-Monotonity of Forming Processes Using Finite Element Analysis</li><li>Parameter Identification Methods for Generalized Maxwell Models: Engineering Approach for Small-Strain Viscoelasticity</li><li>Approximation of the Temperature and Time Dependence of the Stress versus Rupture Life Curves by Power Functions</li><li>Creation and Use of Continuous Cooling (CC) Transformation Diagrams Based on Measured Data and T-t Elements</li><li>On the Relation between the Matensite Start Stress and the Temperature in Single Crystalline Cu-11.5wt%Al-5.0wt%Ni Shape Memory Alloy</li><li>Simulation of Phase Transformations Driven by Short Range Diffusion by Cellular Automaton</li><li>Dynamic Model of Rolling Mill's Electro-Hydraulic Gap Adjustment System</li><li>Real-Time HIL Closed Loop System of Rolling Mill's Electro-Hydraulic Gap Adjustment</li><li>Calculation of the Immiscibility Gap by ESTPHAD Method</li><li>Modelling of Normal Magnetization Curves of Soft Magnetic Alloys</li><li>Mathematical Modeling on Welding Phenomena</li><li>Diffusion of Carbon in the Centerline Region of Continuous Cast Slabs</li><li>Classification of Fullerene Isomers Using Local Topological Descriptors</li><li>Modeling of Distribution of Visible and Non-Visible Graphite Nodules Embedded in the Surface Layer of Ductile Cast Iron</li><li>Shape Features of 2D Figures</li><li>3D Milling by Micro Electrical Discharge Machining</li><li>Characterization of Mineral Materials as Asphalt Fillers</li><li>Optimization of the Mixing Ratio of Two Different Clays Used for Ceramic Roof Tiles</li><li>Laser Welding of Steel Plates with Divided Beam</li><li>Demand of Energy for Chip Removal</li><li>Effects of Extruder Head's Geometry on the Properties of Extruded Ceramic Products</li><li>Reduction Possibilities of Electrical Losses in Plastic Working Equipments</li><li>Investigation of Laser Brazing of Aluminium</li><li>Investigation and Application of High Performance Concretes </li><li>Investigation of the Applicability of the Thermo Photo Analysing Method in Die Casting Technology</li></ul>