<ul><li>Preface and Organizing Committees</li><li>I. Infrastructural and Bio-Materials</li><li>Effect of Precursor Supply on (100) and (001) Orientations of ?-Al<sub>2</sub>O<sub>3</sub> Film Prepared by Laser CVD</li><li>Thin-Film Compositions on Base of Hafnium Dioxide and Aluminum Oxide: Synthesis and Characterization</li><li>Preparation of SiNO<sub>f</sub>/BN High Temperature Wave-Transparent Composites by Precursor Infiltration and Pyrolysis Method</li><li>Preparation of SiAlON-cBN Composites Using Ni Nanoparticle Precipitated cBN Powders</li><li>Thermal Conductivity Design and Evaluation of Zirconium Phosphate Bonded Silicon Nitride Porous Ceramics</li><li>Preparation of Nano-Sized ZrO<sub>2</sub> Powders by Polyvinyl Alcohol-Gel Method</li><li>Effect of Heating Rate on the Synthesis and Sintering of Ternary Carbide Zr<sub>2</sub>Al<sub>3</sub>C<sub>4</sub> through Spark Plasma Sintering</li><li>Densification and Microstructure of Monolithic TiN and TiB<sub>2</sub> Fabricated by Spark Plasma Sintering</li><li>Thermo-Mechanical Analysis of Si<sub>3</sub>N<sub>4</sub>-Based Seal Coatings on Si<sub>3</sub>N<sub>4</sub> Substrate</li><li>Interface Reaction Behavior between Mn and SiO<sub>2</sub> Formed by RF Sputter Deposition</li><li>Phase Transformation and Densification of hBN-TiN Composites Fabrication by Spark Plasma Sintering</li><li>Formation of Mo<sub>2</sub>S<sub>3</sub> Layers on the Surface of Graphitic Platelets</li><li>Foaming of CNTs/PMMA Nanocomposite with Supercritical Carbon Dioxide</li><li>Silicon Carbide Coating on Diamond Powder by Rotary Chemical Vapor Deposition</li><li>Mechanical Properties of Silicon Nitride Porous Ceramics with Bimodal Porosity</li><li>Carbon Nanomaterials for Drug Delivery</li><li>Investigation of a Tb-Doped HfO<sub>2</sub> Single Crystal Grown by a Skull Melting Method</li><li>Surface Modification of Micro/Nano-Fabricated Filters</li><li>New Fe-B-P-Cu Nanocrystalline Soft Magnetic Alloys with High <i>J</i><sub>s</sub> Combined with Low Coercivity <i>H</i><sub>c</sub></li><li>Evaluation of Texture Developed in High-Temperature ?-Phase during Friction Stir Welding of Ti-6Al-4V</li><li>The Effect of Co Addition on Glassy Forming Ability and Soft Magnetic Properties of Fe-Si-B-P Bulk Metallic Glass</li><li>Young's Modulus Changeable ?-Type Binary Ti-Cr Alloys for Spinal Fixation Applications</li><li>Continuous Dynamic Recrystallization during Warm Deformation of Tempered Lath Martensite in a Medium Carbon Steel</li><li>Effect of Phosphorus on Microstructure, Mechanical Properties, and Formation of Retained Austenite in TRIP Steels</li><li>Fabrication of Nanocrystalline Fe<sub>84</sub><sub>.</sub><sub>3</sub>Si<sub>4</sub>B<sub>8</sub>P<sub>3</sub>Cu<sub>0.</sub><sub>7</sub> Powders with High Magnetization</li><li>Dynamic Strain Aging in Biomedical Co-Cr-Mo-Based Alloys with Nitrogen Doping</li><li>Local Atomic Arrangement of Amorphous Zr<sub>50</sub>Ni<sub>50</sub> Alloy Analyzed by AXS-RMC Method</li><li>Microstructure and Mechanical Properties of a Biomedical ?-Type Titanium Alloy Subjected to Severe Plastic Deformation after Aging Treatment</li><li>Difference of Microstructure and Fatigue Properties between Forged and Rolled Ti-6Al-4V</li><li>Microstructural Change of ?' Phase and Hardness Change in As-Solutionized Dental Ag-20Pd-12Au-14.5Cu Alloy</li><li>Effect of Microalloying Elements on Solidification Microstructure of the La(Fe<sub>0</sub><sub>.</sub><sub>89</sub>Si<sub>0</sub><sub>.11</sub>)<sub>13</sub> Alloy</li><li>Study on Microstructure and Property of Diffusion-Bonded Mo-Cu Joints</li><li>II. Electronics Materials</li><li>Growth of <i>b</i>-Axis-Oriented BaTi<sub>2</sub>O<sub>5</sub> Nanopillars by Laser Chemical Vapor Deposition</li><li>Deposition of BaTi<sub>2</sub>O<sub>5</sub> Films on Si Substrates by Using MgO Buffers</li><li>Effect of Nitridation on Indium-Composition of InGaN Films</li><li>Ba<sub>2</sub>TiO<sub>4</sub> and Ba<sub>4</sub>Ti<sub>13</sub>O<sub>30</sub> Thick Films Prepared by Laser Chemical Vapor Deposition and their Microstructure</li><li>Search for New Superconductors by Soft-Chemical Techniques</li><li>Preparation of <i>c</i>-Axis-Oriented Y<sub>2</sub>Ba<sub>4</sub>Cu<sub>7</sub>O<sub>15</sub><sub>-?</sub> Films by Laser CVD with Ultrasonically Nebulized Precursor</li><li>Effect of Sb<sub>2</sub>O<sub>3</sub> Doping Ratio on Electrical and Optical Properties of ATO Films by Pulsed Laser Deposition</li><li>Comprehensive Approach for the Construction of New Material for Electronic Multipliers</li><li>Growth of Heavily Indium Doped Si Crystals by Co-Doping of Neutral Impurity Carbon or Germanium</li><li>Nd<sup>3+</sup> Doped LiCaAIF<sub>6</sub> Single Crystal for Scintillator Application</li><li>Densification of ATO Nanoceramics by Spark Plasma Sintering</li><li>Optical and Scintillation Properties of Eu-Doped Calcium Orthoborate</li><li>Crystal Growth and Scintillation Properties of Ce<sup>3+</sup> and Mg<sup>2+</sup> Co-Doped LiCaAlF<sub>6</sub> Single Crystal</li><li>Study on Phase Diagram of Ca<sub>3</sub>NbGa<sub>3</sub>Si<sub>2</sub>O<sub>14</sub> Piezoelectric Material by Differential Thermal Analysis and X-Ray Diffraction Measurement</li><li>Preparation of Bi<sub>3.6</sub>Ho<sub>0.4</sub>Ti<sub>3</sub>O<sub>12</sub> Ceramics by Hot-Press Sintering</li><li>Proton Dynamics in Water Nanotube of New Molecular Porous Crystal</li><li>Ferromagnetic Resonance Study on FePt Thin Films with In-Plane Magnetization Using Coplanar Waveguide</li><li>Spin Pumping in a Ferromagnetic/Nonmagnetic/Spin-Sink Trilayer Film: Spin Current Termination</li><li>Studies on Properties of Epoxy Resin Base Piezoelectricity Damping Carbon Fiber Composite Materials</li><li>III. Energy and Environmental Materials</li><li>Preparation of Titania Solid Films by Laser CVD Using CO<sub>2</sub> Laser</li><li>Physical Properties of the SiC<sub>x</sub>N<sub>y</sub>H<sub>z</sub> Films</li><li>Microcolumnar and Granular Structures of TiO<sub>2</sub> Films Prepared by Laser CVD Using Nd:YAG Laser</li><li>Ionic Conductivity and Crystal Structure of TM-Doped Mg<sub>0</sub><sub>.</sub><sub>5</sub>Ti<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> (TM = Fe, Mn, Co and Nb)</li><li>Orientation and Morphology of LiCoO<sub>2</sub> Prepared by Chemical Vapor Deposition on Al<sub>2</sub>O<sub>3</sub> Single Crystal</li><li>Environmental Structural Analysis of Raney Ru(Ni) Fine Particles</li><li>Synthesis and Structural Investigation of Metal Hydride, Y(Mn<sub>1-<i>x</i></sub>Fe<sub><i>x</i></sub>)<sub>2</sub>H<sub><i>y</i></sub> (<i>x</i> ? 0.3, 4.0 ? <i>y</i> ? 4.5) and Complex Hydride, Y(Mn<sub>1-<i>x</i></sub>Fe<sub><i>x</i></sub>)<sub>2</sub>H<sub>6</sub></li><li>Charging and Discharging Phenomena in Organic Photoconductors Observed Using Electron Holography</li><li>IV. Basic Materials Science</li><li>Tantalum Vacancy Effects on Electrical Conductivity of La<sub>3</sub>Ta<sub>0</sub><sub>.</sub><sub>5</sub>Ga<sub>5.</sub><sub>5</sub>O<sub>14</sub> and Ba-Based <i>P321</i> Crystals</li><li>Emission Characteristics of Copper Ionic Lines from the 3d<sup>9</sup>5s-3d<sup>9</sup>4p Transition in a Low-Pressure Laser-Induced Plasma</li><li>Optical Conductivity of Rattling Phonons in Type-I Clathrates Ba<sub>8</sub>Ga<sub>16</sub>Ge<sub>30</sub> and Ba<sub>8</sub>Ga<sub>16</sub>Sn<sub>30</sub></li><li>Suppression of Spin Pumping in the Presence of Thin Titanium Interlayer</li><li>Features of the Mackay Clusters with and without a Center Atom in Al Based Approximants of Icosahedral Quasicrystals</li><li>Dislocation Dynamics in Bending Deformation of Si</li><li>Computer Simulation Model for Multi-Size Spherical Particles Reinforced Composite Materials</li></ul>