Light Metals Technology V

Preface
Chapter 1: Computational Materials Science
Development of a Castable, Free-Machining Titanium Alloy
Evaluating the Growth Restriction Factor in Stable and Metastable Al-Si-Ti Alloy Solidification
Prediction of the Yield Strength during a Heat Treatment of Deformed Al-Mg-Si Alloys
Thermodynamic and Elastic Properties of the Phases Appearing in the Lightweight La-Mg Alloys
Chapter 2: Cast and Wrought Alloys
Properties of Magnesium Strips Produced by Twin-Roll-Casting and Hot Rolling
The Application of Positron Emission Particle Tracking (PEPT) to Study Inclusions in the Casting Process
The Aging Response of a Metastable ? Ti Alloy, BTi-6554
The Effect of HIPping on the Microstructure and Tensile Properties of Cast BTi-6554 Alloy
The Assessment of Impact of Construction Factors on Weldability of MSRB Alloy
Assessment of High-Temperature Brittleness Range of the Casted Alloy AZ91
A Study of the Influence of Strain Hardening and Precipitation Hardening Sequence on Development of Mechanical Properties of AlMgSi Conductor Alloys
Novel Grain Refiner for Hypo- and Hyper-Eutectic Al-Si Alloys
Comparison of the Heat Treatment Response of SSM-HPDC 6082 and 6004 Wrought Alloys with A356 and F357 Casting Alloys
Anisotropy of Flow during Forging of Rolled AZ31B Plate in Transverse Direction
Castability of some Magnesium Alloys in a Novel Castability Die
Magnesium Permanent Mold Castings Optimization
Mechanical Properties of Mill-Annealed Ti6Al4V Investment Cast
Influence of Si and Mg Contents on the Mechanical Behavior of Al-Mg-Si Alloys in the Semi-Solid State under Isothermal and Non-Isothermal Conditions
Chapter 3: Innovations and Advances in Processing Technology
Electron Beam Surface Engineering of Spray-Formed Aluminium-Silicon Alloys
Semi-Friction Stir Processing the Method for Improvement of the Product Surface Layer
The Continuous Casting Technology of the Aluminum Rod Assigned for the Wire for Electrical Purposes
EB Surface Alloying and Plasma Nitriding of Different Al Alloys
Studies and Researches Concerning Utilization of some Al-Ni Alloys with High Concentration of Ni Content as Catalytic Agents in Hydrogenation Reactions of the Organic Compound
Application of Lorentz Force Velocimetry to Open Channel Flow
Rapid Manufacturing of Cellular Structures of Steel or Titaniumalumide
Modelling Die Filling in Ultra-Thin Aluminium Castings
Technologies to Improve Productivity and Reduce Tooling Costs in High Pressure Die Casting (HPDC)
Characterisation of CF/AL-MMC Manufactured by Means of Gas Pressure Infiltration
Friction Stir Welding: a Versatile Process for Light Metal Applications
Composites Fabrication via Friction Stir Processing
Magnesium Alloy Strip Produced by a Melt-Conditioned Twin Roll Casting Process
Rheocasting an Engine Mounting Bracket in Commercial 7075
Microstructures of DC Cast Light Alloys under the Influence of Intensive Melt Shearing
A New Technology for Treating Liquid Metals with Intensive Melt Shearing
Novel Processing Techniques for ?-TiAl Alloys
Analysis of the Technology for Manufacturing Heat-Treatable AlMgSi Alloy Wire Rod, in Terms of Physical Phenomena that Affect the Structure and Properties
Microstructure Analysis of Electron-Beam Brazed ?-Titanium Aluminide
Processing of Functionally Graded Aluminium Matrix Composites by Centrifugal Casting Technique
Effect of Vibration during Solidification to Obtain High Potential Metallic Materials
Chapter 4: Novel Forming Technologies
Effect of Heat Treatment on the Mechanical Properties of a Rheocast 357 Alloy Using the SEED Method
Finite Element Analysis of an Axi-Symmetric Forward Spiral Extrusion of Mg-1.75Mn Alloy
Materials Science and Engineering Opportunities for an Energy Efficient and Low Carbon Economy
Metal Injection Moulding of Titanium
Chapter 5: Microstructure and Properties
Aluminum Nanocomposites via Gas Assisted Processing

In Situ Studies of Light Metals with Synchrotron Radiation and Neutrons
Texture Development of Mg AZ80 after Cyclic Loading at 80% Yield Stress
The Relation between Shear Banding, Microstructure and Mechanical Properties in Mg and Mg-Y Alloys
Introduction to the Interdependence Theory of Grain Formation and its Application to Aluminium, Magnesium and Titanium Alloys
Effects of Heat Treatment on a High-Pressure Die-Cast Mg-La-Y Alloy
The Intermetallic Phases in Sand Casting Magnesium Alloys for Elevated Temperature
Crystalline Structure of Metastable Phases in Mg-Nd Alloy Containing Zn and Zr
Liquid Atomic Structure and Viscosity of Al-Si Alloys with and without Sr
Rheology of Liquid Al, Zn and Zn-7wt%Al Systems
Ductility Improvement of Mg-Nd-Zr Cast Alloy by Trace Addition of Zn
Thermal Stability of Vacuum Hot Pressed Bulk Nanostructured Al-Cu Alloys
Distribution of the Quality Index in AlSiMg Castings Produced by Different Processes: Reality vs Prediction
Comparison of the Heat Treatment Response of Wrought and SSM-HPDC Alloy 6082
Properties of AZ31 Magnesium Alloys Subjected to Different Extrusion Processes
Studies and Researches Concerning the Presence of Iron in Secondary Aluminium Meltings and Valorification of Some Aluminium Waste
Fatigue Crack Growth in Ultrafine Grained Aluminium Alloy
Development of Light Weight AA2024 Alpha Composites
Development of Advanced and Free-Machining Titanium Alloys by Micrometer-Size Particle Distribution
Characteristics of Titanium Interface Structures for Advanced FRP-Aluminium Compounds
Compression Creep at 240 degreesC of Extruded Magnesium Alloys Containing Gadolinium
The Effect of Ni on the High-Temperature Strength of Al-Si Cast Alloys
Modeling Bolt Load Retention of Ca Modified AS41 Using Compliance-Creep Method
Effect of Heat Treatment on the Damage Tolerance Properties of Ti-6Al-2Zr-2V-1.5Mo ELI Alloy Plate
Mechanical Behaviour and Corrosion Performance of Thin Film Magnesium WE Alloys
Investigation of the Fatigue Behavior of AlMg4.5Mn (EN AW-5083) in the Temperature Range -60 degreesC < T < 20 degreesC
Carbon Nanotube Evolution in Aluminum Matrix during Composite Fabrication Process
Effects of Processing, Texture and Temperature on the Formability of AZ31 and ZE10 Sheets
Achievements in Deep Drawing of Magnesium Alloy Sheets
Effects of Ceramic Inoculants and Intermetallic Phases on Hot Rolled AZ Magnesium Wrought Alloys
Improvement of Mechanical Properties of 7475 Aluminium Alloy by the Combination of SPD Processing and Annealing
Prediction of Microstructure and Mechanical Properties in Aluminium Castings after Heat Treatment
Influence of Crystallographic Texture on the High Cycle Fatigue of Extruded AZ31 Magnesium Alloy
Strain Rate Effects on the Flow Behaviour and Microstructure of ECAPed Magnesium-Alloys
Precipitation Hardening Behaviour of Al-2Sc Micro Sheets
Solidification Microstructure and Mechanical Properties of Hot Rolled and Annealed Mg Sheet Produced through Twin Roll Casting Route
Microstructure and Mechanical Properties of Nitrided and Chromized Short Steel Fiber Reinforced Aluminum Based P/M Composites
Un-Bundled Carbon Nanotubes Reinforced Light Metal Composites via Powder Metallurgy Route
Effect of Solution Heat Treatment Time on a Rheocast Al-Zn-Mg-Cu Alloy
Effect of Hot Rolling on Microstructure and Texture Evolution of Mg-Li Based Alloy
Effect of Al-Ti-B Based Master Alloys on Grain Refinement and Hot Tearing Susceptibility of AZ91E Magnesium Alloy
Hot Tearing in Cast Aluminum Alloys
Chapter 6: Corrosion and Surface Modification
Stress Corrosion Cracking of a New Rare- Earth Containing Magnesium Alloy, Elektron21 Compared with AZ91E
An Innovative Specimen for Mg Corrosion Studies
Magnesium Corrosion in Different Solutions
Environmentally Assisted Cracking of Magnesium Alloys
Electro- and Electroless Deposition of Ni/SiC and Co/SiC Composite Coatings on Aluminum
Influence of Cerium on the Formation of Micro-Galvanic Corrosion Elements of AZ91
Electrochemical Corrosion Behaviour of ZE41 and QE22 Magnesium Alloys
Intermetallic Particles-Induced Pitting Corrosion in 6061-T651 Aluminium Alloy
Designing Light Alloys for Fatigue Crack Growth Resistance
Evaluation of Initial Corrosion Phenomenon of Magnesium Alloys by SKPFM
Influence of Laser Processing Parameters on Microstructure and Corrosion of Laser Surface Melted ZE41 Magnesium Alloy
Surface Wear Improvement of Al-Alloys by Amorphous Iron-Based Flame-Sprayed Coatings

In Vitro Corrosion and Biocompatibility of Coated MgCa1.0 Magnesium Alloys
Anodic Oxidation and Silane Treatment for Corrosion Protection of AM60B Magnesium Alloy
Corrosion Behavior of As-Cast Binary Mg-Dy Alloys
Characterization of Ni-P/TiO2 MMC Coatings Prepared by Electroless Plating Process on Mg-Nd-Zn-Zr Magnesium Alloys
Chapter 7: Environmental Challenges
The Dark Side of Light Metals: Energy Wasted and Unnecessary CO2 Emitted as a Consequence of the Re-Oxidation of Molten Aluminium
Study on the Characteristic and Effect of the Nickel Ferrite Spinel Cermet as Al Electrolysis Inert Anode
Chapter 8: Automotive and Energy Applications
A Study of a New Generation of Multi-Functional Aluminium Alloys for the Power Industry
Challenges and Solutions in Distortion Engineering of an Aluminium Die Casting Component
Perspectives for the Application of Variable Thickness Aluminium Tubes in Hydroforming of Complex Tubes
Advanced 5xxx-, 6xxx- and 7xxx- Aluminium Alloys for Applications in Automotive and Consumer Electronics
Plastic Formability and Auto Demonstration Parts of Mg-Nd-Zn-Zr Magnesium Alloy
Effect of Iron Addition to Aluminium on the Structure and Properties of Wires Used for Electrical Purposes
Chapter 9: Aerospace Applications
New Possibility for the Connection of Metal Sheets and Fiber Reinforced Plastics
Effect of Alloying Elements on the Consolidation and Mechanical Properties of Ti Compacts by SPS
The Microstructure and Mechanical Properties of Ti-6Al-4V Alloy Bar with a Large Diameter of 450 mm
Chemically Milled Alpha-Case Layer from Ti-6Al-4V Alloy Investment Cast
Machining of Titanium Alloys with and without Coolant
Chapter 10: Medical Applications
Threshold Stress Intensity for Stress Corrosion Cracking (KISCC) of a Magnesium Alloy in Physiological Environment
Properties of Sintered Mg Alloys for Biomedical Applications
Cyclic Deformation of Newly Developed Magnesium Cast Alloys in Corrosive Environment