High-Performance Ceramics VI

Preface and Sponsors
Current Status of Oxide Fibre-Reinforced Oxide Ceramic Matrix Composites for Gas Turbine Applications
Fabrication of Textured ?-Si3N4 and ?-Sialon by Slip Casting in a Strong Magnetic Field and Reaction-Sintering
Large Bulk Al2O3/ZrO2 (Y2O3) Nanocrystalline Composites Prepared by Combustion Synthesis under High Gravity
Ultra-High-Hard Composites of TiC-TiB2 Prepared by Combustion Synthesis under High Gravity
A Study on the Porous Microstructure of Yakbone Bioceramic
Effect of Microstructure on Removal Mechanism of Solid State Sintered Silicon Carbide in Polishing Procedure
Densification and Mechanical Properties of B4C Based Composites Sintered by Reaction Hot-Pressing
Mechanical and Tribological Properties of 3D Carbon Fiber Reinforced SiC Composites Prepared by Liquid Silicon Infiltration
Structure and Performance of Self-Reactive Spray Formed Ti(C,N)-TiB2 Multi-Phased Ceramic Materials
Microstructure and Performance of the Hot-Pressed Silicon Nitride Ceramics with Lu2O3 Additives
Effects of CeO2 on the Mechanical Property and Microstructure of 3Y-TZP Nanocomposite Ceramic Die Material
Microstructure and Mechanical Property of Three-Dimensional Needled C/SiC Composites Prepared by Precursor Pyrolysis
Property and Microstructure of CNTs/AlN Ceramics
Microstructures and Mechanical Properties of B4C-TiB2 Composite Prepared by Hot Pressure Sintering
Effects of Adding SiC Powder on the Properties of Carbon Fiber Reinforced Si-O-C Composites Fabricated via Precursor Pyrolysis
Damage Detection in Fibre Reinforced Ceramic and Metal Matrix Composites by Acoustic Emission
Defects Analysis of Large Size Silicon Nitride Balls Sintered by Gas Pressure Sintering
Effects of SiO2 and Fe2O3 on Morphological of Mullite
Preparation and Characterization of Fe/SiC Ceramic-Metal Composites
Comprehensive Evaluation of Machinabilities of Dental Ceramics
Mechanical Property and Ballistic Performance of Silicon Carbide
Effect of Ball Milling on Microstructure and Flexural Strength of Ti(C,N)-Ni Cermets
Preparation of Porous SiO2 Ceramics by Gelcasting
Preparation of Porous Mullite Ceramics by Fly Ash/Al Compositions
Preparation of Mullite by Coating Al(OH)3 on the Surface of Fly Ash
Preparation of Complicated SiC Green Bodies via Aqueous Slip Casting
Influence of Calcination Time on Pozzolanic Activity of Metakaoline Base on a Novel Evaluation Method
The Microstructure and Tribological Properties of Carbon Fibre Reinforced Carbon/SiC Dual Matrix Composites
Synthesis and Properties of Al4SiC4 by Carbothermal Reduction
Preparation of Cf/SiC Composites by Liquid Silicon Infiltration
Si3N4/BN Composite Ceramics with Nd2O3-Al2O3-Y2O3 Ternary Additives by Pressureless Sintering
Oxidation Resistance Behave of Stainless Steel /TiC Nano Powders
Impact Properties of TiC/Fe at Elevated Temperatures
Oxidation Behavior of TiC/ Fe Ceramics Produced by Self-Propagating High-Temperature Synthesis
Wear Resistance of TiC Ceramic Particulate-Reinforced Metal Matrix Cermets
Thermal Conductivities of LaPO4/Al2O3 Composites Fabricated by SPS
Preparation and Antibacterial Effect of Silver-Carrying Nano-Hydroxyapatite Powder
Thermal Shock Behavior of Nd-Doped ?-Sialon Ceramics
Effect of Silica Coating on the Thermal Stability of Tantalum Based Nitrides Pigments
Influences of SrSO4 and Ag on High Temperature Tribological Properties of Spark-Plasma-Sintered ZrO2(Y2O3)-Al2O3 Composites
Liquid Oxide Flow during Oxidation of Zirconium Diboride-Silicon Carbide Ultra High Temperature Ceramics
Nonlinear Elastic Deformation of MAX Phases
Finite Element Analysis on Temperature-Stress of Permeable Refractory Ceramic under Working Process in Ladle
Convective Heat Transfer Steady Thermal Stress in a ZrO2/FGM/Ti-6Al-4V Composite ECBF Plate with Temperature-Dependent Material Properties
Processing and Characterization of Nano Silicon Carbide Ceramics via Precursor Pyrolysis
Synthesis, Microstructure and Mechanical Properties of ZrB2 Ceramic Prepared by Mechanical Alloying and Spark Plasma Sintering
Detection of Amorphous Silica in Air-Oxidized Ti3SiC2 at 500-1000 degreesC by NMR and SIMS
Microstructure and Mechanical Properties of Hot Pressed ZrC-SiC-ZrB2 Composites
Electronic Structures and Chemical Bonding of the Layered Tungsten Borides: An Ab Initio Calculation
Hot-Pressed TiB2 Ceramics with B4C and C Additives
Effects of Carbon Black on Microstructure and Mechanical Properties of Hot Pressed ZrB2-SiC Ceramics
Influence of Hot Pressing Temperature and SiC Content on the Microstructure and Mechanical Properties of ZrB2-SiC
Pressureless Sintering of ZrB2-SiC Ceramics Incorporating Sol-Gel Synthesized Ultra-Fine Ceramic Powders
Joining of Advanced Ceramics, Glasses and Composites at Politecnico di Torino, Italy
Reaction Layer Microstructure of SiC/SiC Joints Brazed by Ag-Cu-Ti Filler Metal
Estimating Energy Dissipation of Ceramics via H-E Ratio
Comparison and Relative Error of Elastic Modulus in Glass Measured by Three Test Techniques
Synthesis and Luminescent Properties of Mn2+-Doped Zinc Silicate Phosphors by Sol-Gel Method
Microwave Dielectric Properties of RENbO4 (RE=Y, Yb,Ce) Ceramics
Preparation of ZnNb2O6 Nano-Powders by Pechini Method
Low-Temperature Firing and Microwave Dielectric Properties of Zn3Nb2O8 Ceramics with CuO-V2O5-Bi2O3
Microstructure and Leakage Current Characteristics of ZrTiO4 Thin Films by Sol-Gel Method
Preparation and Microwave-Absorption Property of SiO2-SiC-Based Composites
Microstructures and Microwave Properties of CaTiO3 Doped (ZnMg)TiO3 Dielectrics with CaO-B2O3-SiO2 Addition
Magnetic Properties of Manganese-Titanium Substituted Barium Ferrite Ba(TiMn)xFe12-2xO19(x=0.0, 0.5, 1.0, 1.5, 2.0) Prepared by the Molten Salt Method
Characterization of Microwave Ceramics with Low Permittivity and High Quality Factors
Fabrication of Barium Titanate Inverse Opals by Sol-Gel Electrophoretic Deposition Process
Dielectric Properties of CaCu3Ti4O12 Ceramics
Sol-Gel Process for the Synthesis of Single-Phased BaTi2O5 Powder
Develop Single-Phase High Dielectric Constant SiO2-Based Composite Gate Dielectric
The Influence of Annealing Temperature on the Characteristics of 0.95 (Na0.5Bi0.5)TiO3-0.05 BaTiO3 Thin Films
The Influence of Oxygen Plasma Treatment on the Electrical Properties of (Ba0.7Sr0.3)(Ti0.9Zr0.1)O3 Thin Films
The Electrical and Physical Properties of (Ba0.7Sr0.3)(Ti0.9Zr0.1)O3 Thin Films under Conventional Annealing Process
Fabrication and Characterization of Sr0.7Ca0.3TiO3 Substrates Using Aqueous Tape Casting Process
Dielectric Properties of BiFeO3 Ceramics with Equal and Unequal Substitutions of Ti for Fe
Ferroelectric Properties and Microstructures of Pr6O11-Doped Bi4Ti3O12 Thin Films
Dielectric Characteristics of the Lead-Free Piezoelectric Ceramics K0.50Na0.50Nb0.95Ta0.05O3
The Influence of Annealing Treatment on Physics and Electrical Characteristics of Ba(Zr0.1Ti0.9)O3 Ferroelectric Films on ITO/Glass Substrate
Extrinsic Scaling Effects on the Dielectric Response of Grained BaTiO3 Films
Bi4Ti3O12 and Bi3.25La0.75Ti3O12 Thin Films Prepared by RF Magnetron Sputtering
Effect of Cooling Rate on the Properties of the Grain Boundary of CaCu3Ti4O12 Ceramic
Memory Properties of SrBi2Ta2O9/ Ba(Zr0.1Ti0.9)O3 Thin Films Prepared on Si Substrate
Structural and Dielectrics Properties of (1-x)Pb(Fe2/3W1/3)O3-xPbTiO3 Ceramics
Hydrothermal Synthesis of Nano-Structured Barium Titanate from Metatitanic Acid
Preparation of BiFeO3 Nanopowders Using Acetylacetone as Stabilizer
Microstructure and Electrical Properties of Bi3+ Modified ZnO Ceramics
Low Sintering of the Temperature-Stable Dielectric Ceramics Based on Barium Titanate in Reducing Atmosphere
Synthesis of BaTiO3 Nanorods at Room Temperature and Normal Pressure
Preparation and Characteristics of BiFeO3 Ceramics Doped by MnO2 and Co2O3
Effect of Gel-Calcination on Piezoelectric Property in (1-x)BiScO3-xPbTiO3Ferroelectrics
Effects of Co2O3 on the Piezoelectric Properties of Na0.5Bi0.5TiO3 Lead-Free Piezoelectric Ceramics
The Left-Handed Properties of the Composite Medium Composed of Ferrite Cubes' Array and Copper Net
Effect of Specific Surface Area on Growth and Porosity of Oxide Superconducting Ceramic YBCO Single Domain
Comparative Study on Ni-Zn Ferrites by One-Step Synthesis and Conventional Two-Step Synthesis
Synthesis of Magnetic Nano-Composite by Partial Reduction of Barium Hexaferrite via High-Energy Ball Milling
Low Temperature Sintering of Ferro-Materials with Both Capacitance and Inductance Properties
Co2Z, Co2Y and CoM-Type Hexagonal Ferrites for Multilayer Inductors
Glass Binder in Thick Film Metallization Paste for AlN
Microwave Assisted Deposit Oxide Ceramic Coating onto Metal
Dielectric and Sintering Properties of the Doping CaO-B2O3-SiO2 System Low Temperature Co-Fired Ceramics
Control of the Shrinkage during Hybrid Microwave Sintering of Nano-Sized ZnO Based Powder for Varistors
Admittance Spectroscopy of Y2O3-Doped ZnO Varistors Sintered at Different Temperature
Origin of Leakage Currents in ZnO Based Varistor Ceramics with Al(NO3)3 Dopant
ZnO-Pr6O11-Co3O4-TiO2-Based Ceramic Varistor Materials
Rapid Synthesis of Bi Substituted Ca3Co4O9 by a Polyacrylamide Gel Method and its High-Temperature Thermoelectric Power Factor
Effects of pH Value on the Structures and Optical Properties of Bi2S3 Thin Films
Synthesis and Thermoelectric Properties of Ca2Co2O5 Ceramics
Preparation and Thermoelectric Properties of LaCoO3 Ceramics
Effect of Mn2O3 Addition on the Electric and Physical Properties of Lead-Free 0.98(Na0.5Bi0.5)TiO3-0.02 Ba(Sn0.08Ti0.92)O3 Piezoelectric Ceramics
Effect of Bi2O3 Addition on the Electrical and Physical Properties of Lead-Free 0.98(Na0.5K0.5)NbO3-0.02 Ba(Zr0.04Ti0.96)O3 Piezoelectric Ceramics
Influence of Processing Factors on the Phases and Morphologies of ZnS Optical Thin Films
Reversible Surface Wettability Conversion of ZnO Film
Preparation and Dielectric Properties of Oriented PZT Thin Films by LB Technique
Analysis and Test of An Optical Scanner Actuated by PZT Films
Enhanced Brightness and Efficiency in Single-Layer White Polymer Light-Emitting Diodes (PLEDs)
Synthesis of the Gold Nanocubes by Electrochemical Method with Surfactant Solution and Acetone Solvent Addition
Improvement Luminance of Flexible Organic Light-Emitting Diode (FOLED) by Alignment Thickness Rate
Preparation of La1-xCexNiO3 (x= 0 ~ 0.4) Perovskite-Type Oxide by Sol-Gel Using Polyvinyl Alcohol
Zinc-Doped TiO2 Nanotube Arrays
First Principle Study of the Electronic Structure of Gd2SrAl2O7
Preparation and Characterization of Unique Foamy Zirconia Single Crystals via Sol-Gel-Hydrothermal Method
Fabrication of Self-Healing Ceramic Coatings Against Oxidation for Carbon/Carbon Composites Using Polysilazane and B4C Filler
Preparation and Thermal Conductivity of Hf6Ta2O17 Ceramic
Improving Ag-DLC Film Adherence on High-Speed Steel by Varying Ag Contents in A Mid-Frequency Dual-Magnetron Sputtering
Microstructure and Mechanical Properties of TiN/NbN Multilayered Coating
Preparation and Oxidation Resistance of the Borate Glass Coating on Graphite Anode
Tribological Behaviors of W-Doped DLC Films
W-Doped DLC Films by IBD and MS
Titanium Nitride Coatings on Ti Alloys by PIRAC for Orthopedic Implants

In Situ-Fabrication of TiCN Ceramic Coating on Titanium Alloy by Laser Cladding Technology
Influence of Electrophoretic Deposition Voltage on the Phase, Microstructure and Property of a Nano-SiC Coating
Deposition Kinetics of the Cristobalite Aluminum Phosphate Coating on SiC Coated Carbon/Carbon Composites Prepared by Hydrothermal Electrophoretic Technique
Fabrication of Superhydrophobic Surfaces of Titanium Dioxide and Nickel through Electrochemical Deposition on Stainless Steel Substrate
Characterization of Silicon Carbide Grown on RB-SiC by Chemical Vapor Deposition
Preparation of Hydroxyapatite/Chitosan Biological Coatings on Carbon/Carbon Composites
Influence of Annealing Temperatures on the Properties of Dual-Layer W-TiO2 Thin Films
Characteristic of Palladium Coated Tubular Alumina Composite Membrane for Hydrogen Separation
A Study of Different Sintering Routes on Properties of Ni-Al2O3 Hydrogen Separation Membrane
Preparation and Characterization of Different Composition Mg-Cu Tapes
Preparation of Electroless Ni-Mo Coated TiC Powder
Reaction Synthesis of TiC-Ni Composite Coating on Copper Substrate Using Electro-Thermal Explosion Ultra-High Speed Spraying
Evaluating Absolute Hardness of Ceramic Coatings Using Relative Method
Fabrication of Superhydrophobic Surfaces on Al Substrates for Anti-Adhesion and Self-Cleaning Applications
Superoleophobic and Superhydrophobic Surfaces from Microtextured ZnO-Based Surfaces on Si Substrate
The Study of Nanostructured Interfacial Coatings on SiC Fibers by Atomic Force Microscopy
Synthesis of TiO2/Muti-Walled Carbon Nanotubes Composite
Influence of the Processing Parameters on the Coating Hardness on LD10 A-Alloy
Synthesis and Characterterization of Flower-Like NiO Nano-Architectures by Homogeneous Precipitation
Evaluation of Hardness, Local Strength and Contact Fatigue of Brittle Ceramic Coatings at High Temperatures by Hertz Indentation
Preparation of Compositionally Graded CVD SiC Oxidation-Resistant Coating
Structure and Morphology of Sol-Gel Nanocrystalline TiO2 Films Coated on Glass Substrates
Influence of Liquid Evaporation on the Components of SiC High Emissivity Coating
Phase Evolution and Microstructure Characteristics of Calcium Phosphate Based Glass Ceramics Prepared by Sol-Gel Technique
Deposition of Bioactive Titania Layers on Non-Metallic Substrates under Ambient Conditions due to Hydrolysis of Titanium Oxysulfate Solution
UV-Enhanced Bioactivity of PS/TiO2 Coating Prepared by Layer-by-Layer Self-Assembly Method
The Color of Fe2O3 and Bi2O3 Pigmented Dental Zirconia Ceramic
Effect of Ceria Additive on Microstructure and Properties of Laser-Cladded Bioceramic Coating
Preparation and Properties of Injectable Hydroxyapatite for Bone Repair Materials
Microstructure and Mechanical Property of Zirconia Nanocomposites
Controlled Growth and Self-Assembly of CaCO3 Superstructures between the Organic-Water Interfaces
Mechanical Characterizations of Saxidomus purpuratus Shells
Mineralization of Bone-Like Apatite in Chitosan Hydrogel
Comparative Study of Biomorphic Silicon/Silicon Carbide Ceramic from Birch and Compressed Birch

In Vivo Study of Carbon Artificial Femoral Head
Preparation of Porous HAW/ss-TCP Ceramics with In Situ Synthesis of HA Whiskers
Porous ?-Tricalcium Phosphate Composite Scaffold Reinforced by K2HPO4 and Gelatin

In-Situ Templating Synthesis of Thermally Stable Hydroxyapatite with Ordered Nanostructures
Preparation of Carbon Fiber Reinforced Si-HA Bone Cements Composites
Develop an Implantable CPW-Fed Antenna on the MgTa1.5Nb0.5O6 Ceramic Substrate
Ceramic Coatings of Magnesium Alloy for Biomaterial Applications
DSCs Modules Fabricated by Screen Printing
Application of Vertically Oriented TiO2 Nanotube Arrays on Dye Sensitized Solar Cells
Characteristic of Al-Doped ZnO Nanorods by a Hydrothermal Process
Development of Transparent MgAl2O4 Spinel Ceramics
Influence of Deposition Parameters on the Characteristics of AZOY Transparent Conducting Oxide Thin Film
Effects of Vacuum Heat Treatment of Nano Powder on Sintering of Transparent Nano-Crystalline MgAl2O4 Ceramics
Preparation and Properties of Translucent Y-?-Sialon Ceramics by Two-Steps Hot Pressing
Fabrication and Optical Properties of Cr3+:YSAG Transparent Ceramics
Large Scale Translucent Y-?-Sialon Ceramics Prepared by Two-Steps Hot Pressing
Frequency Dependence of AC Conductivity in Iron Phosphate Glasses
Effects of the Starting Powders on Microstructure and Properties of Porous Silica Ceramics
Preparation and Grain Growth of Pb(Zr0.95Ti0.05)O3 Porous Ceramics Prepared by One-Step Pyrolysis Process Using Non-Aqueous Pechini Method
Preparation of Porous Mullite Ceramics Using Al as Foaming Agent
Preparation and Properties of Porous Diamond Preforms
Effects of Infrared Scattering Powders on the Thermal Properties of Porous SiO2 Insulation Material
Mechanical Behaviors of Foam Nickel Ceramic
Effect of Hexagonal BN on the Microstructure and Mechanical Properties of Pressureless Sintered Porous Si3N4 Ceramics
Dielectric Properties of Porous Si3N4 Ceramics Prepared by In Situ Cordierite Bonding
Fabrication and Characterizations of YSZ Electrolyte Films for SOFC
Influence of Thickness on Oxide Ionic Conductivity in Sm3+ and Nd3+ Co-Doped CeO2 Electrolyte
A Facile Template-Free Synthesis of Praseodymium-Doped Ceria Nanorods
Preparation of GDC Nanopowders and GDC/YSZ Core-Shell Nanocomposites
Zircontes/Sulfates Composites: Perfect Combination of High- and Low-Temperature Protonic Conductors
Synthesis and Impedance Spectroscopy of Ga-Doped La9.33(SiO4)6O2 Apatite Oxide Ion Conductor
Preparation and Electrochemical Performance of Hydrogen Electrode and Electrolyte for SOEC by Tape Casting and Lamination
Ni/SDC Materials for Solid Oxide Fuel Cell Anode Applications by the Glycine-Nitrate Method
Fabrication of YSZ Film by Aqueous Tape Casting Using PVA-B1070 Cobinder for IT-SOFC
W Gradedly-Doped Diamond-Like Carbon Thin Films
Effect of Al2O3 Xerogel on the Microstructure and the Properties of Laser Cladding Coating of Fe-Based Alloy
Resonance Properties of a Functionally Gradient Piezoelectric Actuator Based on PNN-PZ-PT Ceramics
Novel Fabrication Method of FGM Containing Nano-Particles - Centrifugal Mixed-Powder Method -
Fabrication of Tailored Powder Structures by Electrophoretic Deposition and Sintering
Single Walled Carbon Nanotubes (SWCNTs) Assembled Site-Selectively on Flexible Substrate
Preparation of Si3N4-Al2O3 Functional Gradient Joining Material Using Transient ?-Sialon Interlayer
Fabrication of MoSi2 Nanocrystal by Mechanical Alloying Large Particle-Sized Starting Powders
Working Principle and Design of a Cylindrical Standing Wave Ultrasonic Motor Using Cantilever Type Bending Transducer
Actuating Mechanism and Design of a Double Driving Feet Linear Ultrasonic Motor Using Longitudinal Vibration Transducer
Dependence of Particle Parameters in Flight and Coating Character on Power of the Electric Supply at Plasma Spraying of TiO2
Fabrication of High Thermal Conductivity ?-Si3N4 Ceramics at Relatively Low Temperature Using MgSiN2 as Additives
Preparation of Xonotlite Whiskers from Carbide Slag
Preparation of Zinc Oxide Whisker on Carbon Fibers
Comparative Analysis of Adding Hydrogen Peroxide or Ethanol in Preparation of Zirconia Nano-Powder by Coprecipitation Methods
Microwave Absorption Properties of Nano-Iron Epoxy Resin-Based Composite Material
Synthesis of Fe-Core/Au-Shell Nanoparticles under Ambient Pressure
First-Principles Study on the Three-Dimensional Structure of Graphane
Luminescent Properties of Eu3+-Doped HfO2 Powders Prepared by Combustion
Finite Element Modeling of Temperature Distribution in Spark Plasma Sintering
A Novel Technique of Flyash Utilization: Preparation of Silica from Flyash by Alkali Leaching
Morphology Control of Si-Based Nanostructures by Catalyst-Assisted Pyrolysis of Preceramic Precursors
Analysis of Profitability in Chinese Listed Ceramic Companies
Environmental Pollution and Pollution Control in Chinese Ceramic Industry
Preparation of Ni - MgO- La2O3 Catalyst on Alumina Support for Catalytic Tar Cracking Process
Properties of Nanosize Aluminum Nitride Powders Synthesized by Chemical Vapor Synthesis
Properties of AlN Powder Synthesized by Self-Propagating High Temperature Synthesis Process
Properties of Silica Ceramic Made from Amorphous Silica
Redesign and Optimization for Ceramic Injection Mould of ZrO2 Fiber Ferrule
Growth Mechanism and Optical Property of a Novel ZnO Mesoscale Superstructure
Crystallization Behavior of Mg-Doped Titania
Preparation and Characterization of Monodisperse Ceria Microspheres
Machining Behavior of Green RBSC Body Prepared by Gel-Casting
Phase Relationships of Al2O3-ZrO2-SiO2 System with Microwave Heating
Unusual Reuniting of Barium Titanate Nanoparticles
A Polymer Complexing Route for Low Temperature Synthesis of Perovskite Lanthanum Aluminate Powder
Combustion Synthesis of Nanocrystalline Al2O3 Powders Using Urea as Fuel: Influence of Different Combustion Aids