Energy Storage Technology and Applications

<ul><li>Preface</li><li>Chapter 1: Materials for Li-ion Batteries Cathodes</li><li>Synthesis of Nickel Cobalt Manganese Ternary Transition Metal Oxide from Mixed Hydroxide Precipitate as a Precursor to NCM811</li><li>LiNi_0.7Mn_0.3O₂ as a Cheap Cobalt Free Nickel Rich Cathode Material for High-Performance Li-Ion Batteries</li><li>Synthesis and Characterization of Cobalt Free LiNiO₂ Substituted by Al-Doping from Beverage Cans via Solid-State Method</li><li>Electrochemical Performance of a Water-Based LiFePO₄ Cathode for Li-Ion Batteries</li><li>Effects of Conductive Agents on Electrochemical Performance of Water-Based LiNi_0.6Mn_0.2Co_0.2O₂ Cathodes for Cylindrical Cell Production of Lithium-Ion Batteries</li><li>Economical Hydrometallurgical Routes for LiFePO4/C Cathode Materials Fabrication</li><li>Chapter 2: Materials for Li-ion Batteries Anodes</li><li>Silicone for Lithium-Ion Battery Anode Derived from Geothermal Waste Silica through Magnesiothermic Reduction and Double Stages in Acid Leaching</li><li>Utilization of Cu-Foil Waste as a High-Capacity Anode Material for High Performance LiNi_0.8Co_0.1Mn_0.1O₂/ CuO@Graphite Batteries</li><li>Synthesis of Lithium Titanium Oxide (Li₄Ti<i>₅</i>O₁₂) through Sol-Gel Method and the Effect of Graphene Addition in Lithium-Ion Battery Anodes</li><li>Effect of Synthesis Temperature on Structural and Magnetic Properties in Hematite (?-Fe2O3) Nanoparticles Produced by Co-Precipitation Method</li><li>Chapter 3: Polymeric Separators for Li-ion Batteries</li><li>Electrospun SiO₂- Containing Poly(Vinylidene Fluoride) Nanofiber Membranes as Lithium-Ion Battery Separators: Effect of SiO₂ Content on Performance</li><li>Synthesis and Characterization of Cellulose Acetate Membrane from Cigarette Butts as Gel Polymer Electrolytes for Lithium-Ion Battery</li><li>Chapter 4: Materials and Technologies for Energy Storage and Conversion Devices</li><li>Experimental and Numerical Analysis of Low Temperature Proton Exchange Membrane Fuel Cell (PEMFC) with Different Fuel Flow Rate in Improving Fuel Cell Performance</li><li>A Novel Synthesis of Cathode Material NaNi_0.5Ti_0.5O₂for Sodium-Ion Batteries</li><li>Chapter 5: Ferroelectric Materials</li><li>Synthesis of BaTiO₃ Ceramics Using Co-Precipitation and Solid-State Reaction Method with Sintering Temperature Variation</li><li>Sintering Temperature Effects on Photocatalytic Activity of SrTi_0.80Mn_0.20O₃</li></ul>