Emerging Technology in Precision Engineering XIV

Preface, Committees and Sponsors
Chapter 1: High Precision Machining
Study on the Mechanism of Optical Glass Sub-Surface Crack Formation in Single Abrasive Grinding
Study on Micro/Nano-Indentation of Typical Soft-Brittle Materials
Wear Characteristics of Cutting Tools in Turning of Sintered Steel under Different Lubrication Conditions
Evaluation of Surface Roughness and Subsurface Damage of 4H-SiC Processed by Different Finishing Techniques
Fabrication of Smooth Surface on 4H-SiC Substrate by Ultraviolet Assisted Local Polishing in Hydrogen Peroxide Solution
Figuring of Aspherical Metal Mirror Substrate for Neutron Focusing by Numerically Controlled Electrochemical Machining
Study on In Situ Etching Rate Monitoring in Numerically Controlled Local Wet Etching
Fabrication of Ultrathin Bragg Beam Splitter by Plasma Chemical Vaporization Machining
Rapid Planarization Method by Ultraviolet Light Irradiation for Gallium Nitride Using Platinum Catalyst
Development of an Ultraprecise Piezoelectric Deformable Mirror for Adaptive X-Ray Optics
Generation of Regularly Aligned Curved Surface Patches on Free-Form Surface for Patch Division Milling
Effect of Cutting Revolution Speed on Cutting Temperature in Helical Milling of CFRP Composite Laminates
Experimental Study of Cutting Performance and Tool Wear in Dry Side Milling of Aluminum Alloy with DLC-Coated HSS-Co Cutter
Machinability of CBN Tool in Turning of Tungsten Carbide
Fabrication of Micropins Using Micro Turning Tools
Ultra-Precision Cutting of Single Crystal Silicon Using Diamond Tool with Large Top Corner Radius
Micro-Milling of Fully Sintered ZrO2 Ceramics with Diamond Coated End Mills
Micro-Groove Cutting for Different Materials Using an Elastic Leaf Spring Type Tool Holder
Micro Cutting of Sapphire
Cutting Performances of Nano-Polycrystalline Diamond
Fundamental Experiment of Near-Dry Deep Hole Drilling with BTA Tool - The Optimal Cutting Conditions and Tool's Geometry
Influence of Material Composition on Ductile Machining of Tungsten Carbide in Elliptical Vibration Cutting
The Effect of Cutting Point Swivel Machining by Using Round Tool with Special Chamfer
Temperature Measurement of Surface Grinding Using a Fluid Supplying System from inside of Grinding Wheel
Edge Sharpening and Surface Modification of PcBN Cutting Tool by Pulsed Laser Grinding
Formation Mechanism of Grain Cutting Edges in Micro Dressing of Polycrystalline cBN Grinding Wheels
Grinding of Super-Alloys Using Metal-Bonded CBN Wheel
Soft-Consolidation Abrasives Pneumatic Wheel Technology Oriented to Finishing of High-Hardness Free-Form Surface
Investigation into Chemo-Mechanical Fixed Abrasive Polishing of Fused Silica with the Assistance of Ultrasonic Vibration
Technical Performance of Zirconia-Coated Carbonyl-Iron-Particles Based Magnetic Compound Fluid Slurry in Ultrafine Polishing of PMMA
Molecular Dynamics Simulation of Metal Cutting with Local Hydrostatic Pressure Field Formation
First-Principles Study of Reaction Process of SiC and HF Molecules in Catalyst-Referred Etching
Simulation Investigation Ultrasonically Assisted Grinding of SiC Ceramics with Single Diamond Abrasive Grain
Investigation of Particle Impact Phenomena in Powder Jet Deposition Process
Chapter 2: Non-Conventional Machining
Effect of Ultrasonic Vibration Drilling on Cutting Stress Distribution
Experimental Verification of Effect of Grinding Fluid Excited by Ultrasonic Vibration
Influence of Different Steel Alloys on the Machining Results in Ultrasonic Assisted Diamond Turning
Investigation of Cutting Phenomena in High Speed Ultrasonic Turning
Investigation of Ultrasonic-Assisted Drilling of Al/SiC Metal Matrix Composite with Taguchi Method
Development of a Novel Surface Processing System Using Femtosecond Pulse Train
Development of the Hole Generation Technology for Aircraft CFRP Parts
High Efficiency and Eco-Friendly Heat Treatment of Small Parts with a Low-Power Diode Laser Beam
Novel System Technology for Trepanning a Laser Beam at Arbitrary Developments of Angle of Incidence and Lateral Focus Position
Thermal Conductivity of Metal Powder and Consolidated Material Fabricated via Selective Laser Melting
A Study on Driven-Type Rotary Cutting for Finish Turning of Carburized Hardened Steel
Development of a New Ultra-Precision Magnetic Abrasive Finishing Process
Adhesion Strength of Electroless Copper Plated Layer on Fluoropolymer Surface Modified by Medium Pressure Plasma
Material Removal Rate Control in Open-Air Type Plasma Chemical Vaporization Machining Using Optical Actinometry
Quadruple Stacked Elliptical Supermirror Device for One Dimensional Neutron Focusing
A Simulation Study on Figure Error Correction Using Near-Gaussian Removal Function in Numerical Controlled Local Wet Etching
Analysis of Discharge Current in Wire-EDM Considering Electromagnetic Fields in and between Electrodes
Challenge to Development of Functional Multi-Wire EDM Slicing Method Using Wire Electrode with Track-Shaped Section
Development of Deburring Technology with Whirling EDM - Influence of the Motor Rotational Speed Control Conditions and the Electrical Conditions on the Machining Characteristics
Performance of Wire-Sawing of Glass Assisted by Electro-Chemical Discharge
Electrochemical Micromachining Using Electrostatic Induction Feeding Method
Generation of Microelectrodes for Micro EDM
Multiple Discharges Phenomena in EDM Using Electrostatic Induction Feeding Method
Relationship between Magnetic Flux Density and Temperature Distributions of Permanent Magnets by EDM
The Machining Characteristics of Insulating AlN Ceramics by EDM
Chapter 3: CAD/CAM Technology
Detection of Surfaces and Edges in Large Point-Clouds Using Region-Growing on Spherical Space
Simulation of Contact Deformation Property of Digital Hand Skin and its Experimental Verifications
Nano-Micro Geometric Modeling Using Microscopic Image
Manhattan-World Assumption for As-Built Modeling Industrial Plant
Evaluating Positioning Uncertainty of Spherical Targets in Laser Scanning
Improvement of Color Information in the Generation of 3D Models of Real Objects Using Range Intensity Images
Surface Generation for Magic-Mirror by End-Milling and Magnetic Polishing with Digitally Functioned CNC Machining Center
Biofabrication of Biopolymer and Biocomposite Scaffolds for Bone Tissue Engineering
Method to Decide Paths and Postures of Flat End Mill for 5-Axis Control Machining Based on Minimum Cusp Height
Proposal of Ball End-Milling Condition Decision Methodology Using Data-Mining from Tool Catalog Data
Indexing 5-Axis Machining Process Design Support System Shortening Die Fabrication Lead Time
Generation of NC Program for Realizing High Speed Feed Rate of Cutting Tool
Development of Orthros, an Evaluation System for Free Curved Plate Thickness with a Robot - Generation of the Path Considering Collision
Reuse of Digital Mock-Up Data by Using Shape Matching
Automatic Reverse Engineering Based on Reconstructing Measurement Data in 3D-Lattice
Cutter Engagement Feature Extraction by Using Dexel Representation Solid Model
Chapter 4: Machine Tools and Control
In-Process Monitoring of Tool Behavior and Tool Wear in End Milling by Use of Projection Image
Sensor-Less Tool Fracture Detection Applying Disturbance Observer Theory
On the Extraction of Milling Tools Out of Shrink Fit Chucks
Method of Improvement in Identification Accuracy of the Dynamic Characteristics of Joints in Jointed Structure
Measurement of Contact Stiffness for Stiffness Estimation of Machine Tool Supports
Measurement of Movement Error and its Compensation for 6-DOF Parallel Mechanism Worktable
Concept for Temperature Control in Broaching Nickel-Based Alloys
Proposal of a Machining Test of Five-Axis Machining Centers Using a Truncated Square Pyramid
Polishing Process Automation by Industrial Robot with Polished Surface Quality Judgment Based on Image Processing - Visual Inspection Based on Pattern Matching
Analysis of Kinematic Motion Deviations of Machining Centers with Rotational Axis Based on Geometric Tolerances
Cutting Performance of Ceramic Tools in Turning of Mild Steel
Development of New Scaife Machine for Making the High Precision Diamond Cutting Tools
Development of Pipe Structure Frame for CNC Lathe - Adaptation of Thermal Displacement Control
Optimization of Feed Speed and Stroke for Step Micro Hole Drilling of Printed Wiring Boards by Response Surface Method
Development of a Drum-Type Manufacturing Method for Electroplated Diamond Wire Tools
Change in Dynamic Characteristics of Spindle for Machining Centers Caused by Chucking Mechanism of Clamped Toolholders
A Thermally Stable High Speed Spindle System Equipped with Self-Cooling Function
Hydrostatic Bearing with High Bulk Modulus Fluid
Precise Positioning of an Air Bearing Lead Screw Stage by Semi-Closed Loop Control
Development of Dynamic Loading Device for Rotating Spindle of Machine Tools
Chapter 5: MEMS/NEMS
A Valveless MEMS Pump Utilizing a Thin Film Permanent Magnet
A Prototype MEMS Actuator Driven by Magnetic Fluid Enclosed with Polyimide Diaphragms
Thermal Driving Method and Displacement Properties of a Thin-Film Polyimide Diaphragm for a MEMS Actuator
Fabrication and Characterization of AFM Probe Integrated with High-Aspect-Ratio Diamond Tip
Fabrication of Acoustic Emission Sensor Integrated with Cantilever Array for Detection of Signals Divided into Frequency Domain
Multi-Scale Product Design and Lifecycle Simulation System for Nano Product Design
Fabrication of Si Mold Using ICP Etching for X-Ray Diffraction Grating
Fabrication of Micro-Capacitive Inclination Sensor Using the LIGA Process
A Novel Batch Fabrication of Micro Parts Using DNA Pattern Recognition
Nanowire Fabrication by DNA Metallization and Positioning
Fundamental Study on Nanoremoval Processing Method for Microplastic Structures Using Photocatalyzed Oxidation
Fabrication of Spatially-Patterned Cells Using Selective Adhesion on Pre-Structured Fine Particles
MPF-FDTD Simulations of Fabrication and Optical Analysis of Ordered Gold Nano-Dots Array
A New Process to Fabricate Three Dimensional Ordered Nano Dot Array Structures by Nano Plastic Forming and Dewetting
High Throughput Method to Fabricate Ordered Nano Dot Array on Various Plastic Films
Chapter 6: Precision/ Medical Devices
Motion Artifact Compensation for Wristwatch Type Photoplethysmography Sensor
Development of Wire-Connected Mechanism for Precise Positioning
A Micro-Stage for Linear-Rotary Positioning
Quantitative Evaluation Method for Damping Capacity of Linear Rolling Bearings for Feed Drive Mechanisms
About Determining the Error Budget of a Miniaturized, Modular Machine Tool System for Micro Production
Self-Assembly of Fine Particles on Optical Element for Sensitivity Improvement of Biochemical Sensor
Microstructuring of Culture Media and its Effect on Cell Adhesion
Fabrication of Precise Asymmetric Nanoshells Array with Nanogaps for a Label-Free Immunoassay Based on NIR-Light Responsive LSPR
The Study of Equalizing Injection Force in Multiple Injecting Needle-Free Injector
Chapter 7: Mechatronics
Autonomous Conveyance Control of AGV Based on Knowledge of Taxi Transportation Rules
Control of Percussion Motion by Sound Feedback with a Humanoid Robot
Development of a Small Hovering Robot with High Lifting Force Using Coaxial Double Rotors Driven by Twin Motor Pairs
Vibration Suppression Control Using Vibration Node of Articulated Robot with Multiple Vibration Modes
Nonlinear Modeling of Human Quiet Standing
Non-Contact Actuation of Less-Invasive Bone Lengthening Device Using Embedded Cycloidal Motor Driven by Permanent Magnets from the outside
Actuation Force Measurement Mechanism for Non-Contact Ultrasonic Suspension
Development of 2-DOF Hybrid Actuator System
A 3-DOF Friction-Free Planar Motor Using Piezoelectric Elements
A Method for Online Identification of Two-Inertia Mechanical System Including Nonlinear Friction
Development of Transient Thermal Deformation Control Techniques Using Thermal Modal Analysis Based Design Methods
Development and Evaluation of Miniaturized 6-DOF Parallel Link Manipulator
Influence of Servo Characteristics on Motion Accuracy of Parallel Kinematic Mechanism
Micro-Aspheric Mold Polishing Utilizing Magnetostrictive Vibration-Assisted Polishing Machine
Development of a Lens Driving Maglev Actuator for Laser Beam Off-Axis Cutting and Deep Piercing
Chapter 8: Mechanical Design and Tribology
Advanced Tolerancing Based on Product Performance by Using Statistical Tolerance Index Cpk and Cc
A Design Method for Thin Film Patterning Process via Lift-Off Technique
Detecting Method of Bulk Defects in DLC Films Using Light Scattering
Manufacturing of Tribologically Optimized Surfaces for Powertrain Applications
Effects of Penetrated Graphite on Tribological Properties of Copper Based Journal Bearing
Chapter 9: Precision Metrology
Thermal Test for Error Maps of Rotary Axes by R-Test
Development of a Cutting Tool with Micro Built-In Thermocouples - Characteristic of the Micro Cu/Ni Thermocouples Fabricated by Electroless Plating and Electro Plating
Passive THz Near-Field Imaging and its Applications for Engineering
Design and Experiment of Thermal Contact Sensor Detecting Defects on Si Wafer Surface
Novel Measuring Principle of Pitch Deviation Evaluated through Double-Flank Gear Rolling Test with Rack Probe
Dynamic Response of an Air-Bearing Displacement Sensor for on-Machine Surface Form Measurement
Absolute Calibration of the Rotary Encoder Considering the Influence on-Machine for Development of High-Speed Nanoprofiler
Analysis and Measurement of the Dynamic Motions of a Large-Scale Rotating Roll Workpiece
Eccentric Error Compensation for Pitch Deviation Measurement of Gears
Form Error Characterization of Reflective-Type Gratings
Development of an Optical Heterogeneity Evaluation System Using Phase-Shift Digital Holography
New Non-Contact Measurement of Small inside-Diameter Using Tandem Low-Coherence Interferometer and Optical Fiber Devices
Development of a Non-Contact Precision Measurement Technique Using Optical Frequency Combs
Sphericity Measurement Using Stitching Interferometry
Proposal of Improving Method of Rotational 2-Axis Synchronous Accuracy of Plate Motion Control with a Dual Arm Robot by Estimating Ball Rolling Motion on the Plate
Pivot Turning Measurement of Relative Position and Posture for Moving Robots System Using Stereo-Camera
Geometric Quality Indicators for Scanned Point Clouds
Analysis and Evaluation of Surface Force Effects in Vibrating Fiber Probing System for 3-D Micro Structure Measurements
Design of a Three-Axis Surface Encoder with a Blue-Ray Laser Diode
Design and Test of a Three-Axis Mosaic Surface Encoder
Edge Contour Measurement of Single Point Diamond Cutting Tools by an Optical Probe
Automatic Recognition of a Piping System from Laser Scanned Points by Eigenvalue Analysis
Cr-N Strain-Gauge-Type Precision Displacement Sensor for Measuring Positions of Micro Stage
Improvement of an Air-Bearing Displacement Sensor with Nanometric Resolution
Effect of Discharge Condition on Cavitations Behavior by Single Pulse Discharge
Sub-Nanometer Line Width and Line Profile Measurement Using STEM Images with Metal Coating
Characterization of TMR Head Durability against Lapping Based on Magnetic Performance
Chapter 10: Green Manufacturing
Cutting Performance of Oxygen-Including Compounds in MQL Machining of Aluminum
Development of Electric Rust Preventive Machining Method - Optimization of Water Recycle System
Development of Electric Rust Preventive Machining Method - Improvement of Electric Rust Preventive Chip Sedimentation System
Energy Reduction of Machine Tools
Simulations on Wear of a Reused Part that Consider Deviation of Product's Motion due to Deterioration of the Part
Chapter 11: Advanced Moulding and Forming
Basic Study on Laser Forming Method for Curved Surfaces
Wafer Level Glass Molding
Lateral Extrusion of A6063 Pipes with a Lost Core of Alumina Powder Bonded with Wax
Shape Recovery Method for Repairing Dents on Stainless Steel Sheets by Laser Forming
Advanced Machining Processes for Micro Mold Fabrication
Chapter 12: Other Related Technologies
Fabrication and Characterization of Electrodes for Microbial Fuel Cell
Control of Built-Up Edge Behavior by Chamfered Cutting Edge Preparation and Surface Modification
Micro-Drilling of CFRP Plates Using a High-Speed Spindle
Cutting Experiments in Cutting Speeds of up to 200 m/s with a High-Speed Impact Cutting Tester
Portable 532 nm Iodine-Stabilized DPSS Laser for Length Standard
Influences of the Inserted Angle of an Optical Fiber for an Optical Trapping
Theoretical Investigation of an Optical Vibration Using Laser Beams from Optical Fibers Inserted at an Angle of 35 Degrees
Investigation on Dynamic Chemical Etching of Fiber Probe for Cell Isolation
Two-Dimensional Cell Trapping Using Single Axicon Fiber without Physical Contact
Improvement of Interface Roughness in Platinum/Carbon Multilayers for X-Ray Mirrors
Surface Nitriding of Al-Mg Alloys Using a Rotary Barrel Tank
Improvement of Finished Surface Integrity of High Chromium Cast Iron in Reaming
Improving Anti-Adhesion in Cutting of Aluminum Alloy by Micro Stripe Texture - Considering Texture Combination