Bioceramics

<ul><li>Preface</li><li>Chapter 1: Calcium Phosphate Bioceramic Materials</li><li>Influence of Zinc Substitution on Hydroxyapatite Structure Prepared by Chemical Precipitation Method</li><li>Characteristic, Microstructure and Properties of Dense Hydroxyapatite Ceramic from Cockle Shell for Biomaterials</li><li>Characterization of Hydrothermal Processing Influence on Strontium Substituted Apatite by Investigating Stable Oxygen Isotope Ratio and Antibacterial Activity of Obtained Peroxyapatite</li><li>The Influence of Microstructure on the Surface Charge of Sintered Hydroxyapatite Ceramics</li><li>Hydrothermal Processing for Increasing the Hydroxyl Ion Concentration in Hydroxyl Depleted Hydroxyapatite</li><li>Comparison of Different Classical and Instrumental Analysis Methods for Precise Quantification of Calcium and Phosphorous Ratio in Hydroxyapatite</li><li>Production and Characterization of Oxyhydroxyapatites</li><li>Characteristics of Abalone Mussel Shells <i>(Halioitis asinina) </i>with Calcination Temperature Variations as a Basic Material for Synthesis of Carbonated Hydroxyapatite</li><li>The Effect of pH on the Characteristics of Carbonate Hydroxyapatite Based on Pearl Shell (<i>Pinctada maxima</i>)</li><li>Effect of Sintering Temperature on Carbonated Hydroxyapatite Derived from Common Cockle Shells (Cerastodermaedule): Composition and Crystal Characteristics</li><li>Extraction of Biological Apatite from Cow Bone at Different Calcination Temperatures: A Comparative Study</li><li>
<i>In Vitro</i> Resorbability of 3D Printed Hydroxyapatite in Two Different pH Buffered Solutions</li><li>A Comparative Study of Granular Agglomeration between 3D Printed Hydroxyapatite and Commercial Bone Graft Granules</li><li>Enhancing the Phase Conversion of Hydroxyapatite from Calcium Sulphate Hemihydrate by Hydrothermal Reaction</li><li>Experimental Investigation on Synthesis of Nanocrystalline Hydroxyapatite by the Mechanochemical Method</li><li>Development of Mesoporous Magnetic Hydroxyapatite Nanocrystals</li><li>Unique Dicarboxylate Ion Incorporation in Octacalcium Phosphate</li><li>Synthesis and Characterization of Novel Crystalline Mesoporous Beta-Tricalcium Phosphate Nanoparticles</li><li>Processing and Properties of Biphasic Calcium Phosphates Bioceramics Derived from Biowaste Materials</li><li>Study of Carbonated Calcium Phosphate Precipitation on Collagen</li><li>Chapter 2: Bioactive Glasses and Glass-Ceramics</li><li>Antibacterial Properties among Different Concentration of Bioactive Glasses</li><li>Bioactivity and Antibacterial Studies on Silver Nanoparticles Embedded Calcium Borosilicate Ceramics</li><li>Influence of Thermal Treatment Temperature on Phase Formation and Bioactivity of Glass-Ceramics Based on the SiO₂-Na₂O-CaO-P₂O₅ System</li><li>Crystallization Kinetics and Heat Treatment Temperature on Microstructure of Na₂O-CaO-P₂O₅-TiO₂ Glass System</li><li>Preparation of Calcium Phosphate Glasses Containing Nb₂O₅ and TiO₂</li><li>Fabrication of Mesoporous Bioactive Glass Nanoparticles by Sol-Gel Method</li><li>Fabrication of Bioactive Glass with Titanium Ion Doping via Various Reactive Environments</li><li>Chapter 3: Other Types of Bioceramic Materials</li><li>Analysis of the Effect of Cyclic Fatigue on the Flexural Strength of a Ceramoceramic System Used in Dental Prostheses</li><li>ZrO₂ Pre-Sintered Blocks (3%mol-Y₂O₃) with Color Gradient for Dental Prostheses</li><li>Ceramics and Glass-Ceramics Dental Materials: Chemical Solubility, Cytotoxicity and Mechanical Properties</li><li>Understanding Silicon Nitride's Biological Properties: From Inert to Bioactive Ceramic</li><li>Silicocarnotite Synthesis and Bioactivity in Artificial Saliva Medium</li><li>Bioceramics are Not Bioinert: The Role of Oxide and Non-Oxide Bioceramics on the Oxidation of UHMWPE Components in Artificial Joints</li><li>Chapter 4: Scaffolds Based on Bioceramics</li><li>The Effect of Sintering Aid on Fabrication of Three-Dimensional Carbonated Hydroxyapatite Porous Scaffolds</li><li>Porous Hydroxyapatite/Chitosan/Carboxymethyl Cellulose Scaffolds with Tunable Microstructures for Bone Tissue Engineering</li><li>Preparation and Characterization of Ha/Gel/?-TCP Microspheres Composite Porous Scaffold</li><li>Using Chitosan Besides Nano Hydroxyapatite and Fluorohydroxyapatite Boost Dental Pulp Stem Cell Proliferation</li><li>Fabrication of ?-TCP Scaffold with Pre-Designed Internal Pore Architecture by Rapid Prototyping of Mask Projection Stereolithography</li><li>3D Liquid Bioprinting of the PCL/?-TCP Scaffolds</li><li>Characterization of Hydroxyapatite/ Silk Fibroin/ Chitosan Scaffold for Cartilage Tissue Engineering</li><li>Preparation of a Hydroxyapatite Ceramic with Comblike Tubules Structure and its Permeablity</li><li>Bone Morphogenetic Protein-2 Incorporated Beta-Tricalcium Phosphate Enhanced Bone Regeneration of Critical-Sized Bone Defects in Rats</li><li>Characterization of Porous Hyaluronan/?-TCP Scaffolds Prepared through Heterogeneous Crosslinking</li><li>Investigation of the Pore Morphology of the Hydroxyapatite-Based Bicomposites Processed by Two Step Sintering</li><li>A Histological Assessment of the Mechanism of Early-Stage Healing of a Biphasic Calcium Phosphate in an <i>In Vivo</i> Rabbit Model</li><li>Fabrication and Characterization of Novel Bone Void Filler Made from Hydroxyapatite-Rice Starch Composite</li><li>Compressive Strength Evaluation and Phase Analysis of Pulp Capping Materials Based on Carbonate Apatite-SCPC Using Different Concentration of SCPC and Calcium Hydroxide</li><li>Preparation and Characterization of Macro Porous Glass-Ceramics as Bioactive Scaffold Material</li><li>Chapter 5: Coatings, Surface Modification and Treatment Using Bioceramics</li><li>Study and Characterization of Mechanical and Electrochemical Corrosion Properties of Plasma Sprayed Hydroxyapatite Coatings on AISI 304L Stainless Steel</li><li>Formation of a Surface Charged Microarc Coatings Modified by Boehmite Nanoparticles</li><li>Development of Novel Poly (?-Caprolactone)/ Fluorine Substituted Hydroxyapatite Bilayer Coated 316L Ss for <i>In Vitro</i> Corrosion Protection</li><li>Effect of Carbonate Substitution on the Biomineralization of Apatite Bulk and Coating</li><li>RF-Magnetron Sputtered Silica Interlayer on ?-TCP Granules for Mesoporous Silica Coating</li><li>TiC-Coated Carbon Black Particles as a Bioactive Ceramic Compound for Application of Bone Tissue Engineering</li><li>Fracture Properties and Failure Analysis of Zirconia Toughened Hydroxyapatite Bioceramic Coating</li><li>Hydroxyapatite Electro Discharge Coating of Zr-Based Bulk Metallic Glass for Potential Orthopedic Application</li><li>Co-Deposition and Characterization of Hydroxyapatite-Chitosan and Hydroxyapatite-Polyvinylacetate Coatings on 304 SS for Biomedical Devices</li><li>Effect of Crystalline Calcium Phosphate Coatings Prepared in an Aqueous Solution on Corrosion Resistance of Bioabsorbable Magnesium Alloy</li><li>Multifunctional Bioceramic Composite Coatings Deposited by Cold Spray</li><li>Electrochemical Impedance Spectroscopy (EIS) Evaluation of Hydroxyapatite-Coated Magnesium in Different Corrosion Media</li><li>Surface Characteristics of Dentin Derived Hydroxyapatite Coated Layer on Titanium by RF Magnetron Sputtering</li><li>Evaluation of the Bactericidal Properties of the Biomimetic Coating of Ha Doped with AgNO₃</li><li>CO₂ Laser Bonding of Silicate-Substituted Strontium Apatite on PEEK and Osteointegration on its Surface</li><li>Adhesion and Scratch Testing of Antibiotic Loaded Poly-Lactic Acid Biocomposite Thin Films on Metallic Implants</li><li>Cementing Line Configuration of Bioactive Engineered Zirconia Implants (<i>In Vivo</i> Histological Study)</li><li>Effect of Interface Damage on Loosening Behavior of Acetabular Cup Subjected to Cyclic Loading</li><li>Biofunctionalization of Ceramic Implant Surfaces to Improve their Bone Ingrowth Behavior</li><li>Ethylene Oxide Sterilization of TiN/TiO₂ Coated Titanium Implant Material</li><li>The Influence of Processing Conditions on the Structure of Magnetron Sputtered Hydroxyapatite Thin Films</li><li>Chapter 6: Bioceramic-Based Composites</li><li>Fracture Behavior as Selection Criterion for Alloplastic Bone Graft Applications</li><li>Injection Behavior of some Biocomposite Feedstocks</li><li>FTIR and XRD Evaluation of Magnesium Doped Hydroxyapatite/Sodium Alginate Powder by Precipitation Method</li><li>Hydroxyapatite/Polyvinyl Alcohol Composite Hydrogels for Bone and Cartilage Tissue Engineering</li><li>Cotton-Wool-Like Resorbable Bone Void Fillers Containing ?-TCP and Calcium Carbonate Particles</li><li>Influence of Sintering Temperature on Physical and Mechanical Properties of Hydroxyapatite-Calcium Titanate Composite</li><li>Evaluation of Elution Behavior of Silver Ions from Silver-Containing Carbonate Hydroxyapatite Composites</li><li>Microstructural and Mechanical Properties of Nano-Yttria-Oxide Doped Hydroxyapatite Composites</li><li>Electrical Properties of Clinoptilolite/Aluminium Oxide/Bovine Hydroxyapatite Composites</li><li>Fabrication of Novel Hemostatic Film with Oxidized Cellulose and Sugar-Containing Hydroxyapatite</li><li>Assessing the Physical-Mechanical Characteristics of Hydroxyapatite-Titanium Oxide Biocomposites Produced by the Polymeric Wax Addition Method</li><li>Development and Characterization of Hydroxyapatite-Alumina Biocomposites for Orthopedic Implants</li><li>Fabrication of Hydroxyapatite/Cellulose Fiber Composite with Sheet-Like Structure</li><li>The Effect of Glutaraldehyde on Hydroxyapatite-Gelatin Composite with Addition of Alendronate for Bone Filler Application</li><li>Hydroxyapatite-Collagen Composite Made from Coral and Chicken Claws for Bone Implant Application</li><li>Microstructural and Mechanical Properties of Al₂O₃/HAp Composites for Use as Bone Substitute Material</li><li>Biocomposite of Ultra-High Molecular Weight Polyethylene and Hydroxyapatite with Antibacterial Properties by the Incorporation of Zinc Oxide Nanoparticles</li><li>Fabrication of Cellulose Acetate/Cellulose-HA Composite Films for Bone Fixation</li><li>Microwave Synthesis of Nanocrystalline Hydroxyapatite and the Application in Bio-Composite</li><li>Production of a Brushite/Silk Composite Powder for Coatings</li><li>Chapter 7: Injectable Bioceramic-Based Systems and Cements</li><li>The Evaluation of Setting Time and FTIR Spectroscopy of Carbonate Apatite Cement as Endodontic Sealer</li><li>?-Dicalcium Silicate Cement Modified with ?-Tricalcium Phosphate: <i>In Vitro</i> Bioactivity and Mechanical Strength</li><li>Effect of Heat Treatment on Mechanical and Setting Properties of TTCP-Based Calcium Phosphate Cement</li><li>Neutral Liquid Containing Chitosan and Polyol for Calcium Phosphate Cement</li><li>A Study of Mechanical Properties of Bone Cement Containing Micro- and Nano- Hydroxyapatite Particles</li><li>Physicochemical and Cytotoxicity Characterization of Injectable Bone Substitute Based on Hydroxyapatite - Chitosan - Streptomycin for Spinal Tuberculosis Cases</li></ul>