Advances in Metallurgical and Mining Engineering

Preface and Organizing Committee
Chapter 1: Metallurgical Physical Chemistry
Molecular Identification of a Strain Acidithiobacillus Ferrooxidans and its Biological Characteristics
Kinetics of Leaching Vanadium with Sulfuric Acid from Carbonaceous Shale Containing Vanadium
Influencing Factors and Mechanism of Cobalt Redissolution from Zinc Sulphate Solution
Modeling Investigation of the Oxidation Kinetics of Copper and Aluminum Alloys
Determination of Surface Tension of the Freeze Slag in Reaction Shaft of Flash Smelting Furnace
Calculating Model of FetO Activity in Alkali-Containing BF Slag
Recovery of Valuable Metals from Copper Slag by Hydrometallurgy
Effect Evaluation of Inhibitor to Barium Sulfate and Strontium Sulfate
Physical Simulation on the Liquid Metal Flow in FC-Mold of Slab Continuous Casting
Mechanism of Precipitate Removal of Arsenic and Bismuth Impurities from Copper Electrolyte by Antimony
Leaching Kinetics and Seperation of Antimony and Arsenic from Arsenic Alkali Residue
Research on Detoxifying Treatment to Chromium Slag
Comparison Study of the Electrochemical Behavior of Vanadate in NaOH and KOH Solutions
Analysis of Factors Affecting Carbon Content Detection of Ferrochrome Alloy Using LIPS Method
Detection of Carbon in Ferroalloy Using Internal Standard Method Based on LIBS
Chapter 2: Ferrous Metallurgy
Numerical Simulation of Flow-Induced Wall Shear Stress of a One Strand Tundish Design
Experimental Investigation of the Viscosities of High Titanium Containing Slags with Low Mass Ratio of CaO to SiO2
Application of Data Mining in BOF Steelmaking Endpoint Control
Isothermal Experimental Study on the Effects of Converter Bath Shape on the Melt Mixing
Migration Principle of Chlorine in BF Production
Causes and Countermeasures of Cracking in Cogging Process of 40Cr Bloom
Application of Simulated Annealing Algorithm in Sintering Burdening Optimization
Influence of Casting Speed on Solidification Process and Solidification Structure of Continuously Cast Bloom
Effects of Operation Parameters on Desulphurization of Hot Metal with Passive Magnesium and Calcium Oxide in CSP Plant of WISCO
High-Temperature Oxidation Kinetics of Galvalume-Coated Steel Sheet
Influence of Hollow Electrode Ar-CH4 Co-Injection on Temperature in a Ladle Furnace with Alternating Current Supply
MEST of Round Blooms with Different Foot Roll Pitch Designing for Peritectic Steel Casting
Research and Application of the New Technologies on Blast Furnace at Shougang Qiangang Plant
Numerical Simulation and Optimization Practice of Oxygen Lance for Converter Steelmaking
Research on Thermal State of Mould Copper Plate with Different Heat Transfer Coefficient
Study on the Influence Factor of the Caustic Calcined Dolomite Based Compound Desulfurizer Melt Point
Study on Effect of Pressure to Nitrogen Solubility Limit in High Nitrogen Steels
Process Analysis of Pb and Zn during Producing Iron Nuggets by Iron Bearing Dust
Effect of Ladle Slag Modification on Slag Sticking to Snorkel and Rate of Slag Erosion
Ore-Proportioning Optimization Technology in Pellet Process Based on Self-Characteristics of Iron Ores
Phase Transformations and XRD Analysis of Austempered Ductile Iron
Influce Mechanism on Compressive Strength of Coke in Blast Furnace
Study on Fluid Flow in a Large Round Bloom Continuous Casting Mold
The Effect of Time to Nitrogen Solubility in Steel with High Pressure and Bottom Blowing Nitrogen
Nitrogen Control Technology for the Blowing Process of Combined Blowing Converter
Study on Formation Mechanism of Frame-Shaped Segregation in 40Cr Wire Rod Rolled from Bloom
Strength and Consolidation Mechanism of Green Pellets Containing Carbon
Formation and Prevention of Sliver Defects on the Surface of Cold-Rolled Strip
Phosphorus Distribution Equilibrium between CaO-FeO*-SiO2-P2O5(15%)-CaF2(B2O3) Slag System and Carbon-Saturated Hot Metal at 1573K
Research on RDI+3.15 of Respectively Granulating Sintering
Chapter 3: Metallurgy of Non-Ferrous Metals
Acid Leaching of Vanadium from a Vanadium Residue
Influence of Fe2O3 on Molten Slag Properties in Slag Splashing on Nickel Smelting Converter
A Novel Method of Leaching Vanadium from Extracted Vanadium Residue Using Sodium Sub-Molten Salt Medium
Study on the Removing of Ammonia Nitrogen in Ammonium Paratungstate Crystal Parent Solution
Kinetics of Pressure Acid Leaching of Zinc from Zinc Silicate Ore
Microstructure Evolution of A356 Aluminum Alloy Produced by Cooling Slope Method
Evaluation of Melting Temperature of the Freeze Slag in Reaction Shaft of Flash Smelting Furnace
Research of Biological Desilication Mechanism by Bacillus mucilaginosus GSY
Material Ratio Optimization of Low Mass Ratio of Alumina to Silica of Calcium Aluminate Slag Based on Thermodynamic Calculation Method
Nickel Loss during Iron Precipitation and Product Characterization
Mechanism of Precipitate Removal of Antimony and Bismuth Impurities from Copper Electrolyte by Arsenic
Zinc Removing from Aluminum Alloy by Vacuum Distillation
Investigations of Alloying Elements and Rare Metals on the Hydrogen Content and Inclusion in Aluminum Alloy
Upgrade Silicon Powder Prepared by SHS with Acid Leaching Treatment
Effect of Polymer Surfactants on the Inhibition of Beta-Dicalcium Silicate Decomposition in Sodium Aluminate Solution
Study of Tungsten Smelting Aqua System Heterogeneous Discipline
Detection of Interface Displacement of Liquid Metal Using Magnetic Field Tomography
Behavior of A356 Alloy in Semi-Solid State Produced by Mechanical Stirring
Research of Prediction Method in Large Slope for Three Dimensional Object Deformation
Chapter 4: Metallurgy Materials and Environmental Engineering
Influence of Magnetic Field on as Industrial Waste Water Extraction
Corrosion Behavior of Pb-Ca-Sn Electrodes for Copper Electrowinning
Thermodynamics Analysis of Hot Metal Dephosphorization Flux Reaction Process
Research Lifetime of Oil Film Bearing on High-Speed Wire Mill Based on Reliability Analysis
Investigation of Cost Optimization of Pig Iron
Fluid-Flow Characteristics and Critical Phenomenon in a Bottom Blowing Bath
Study of Metallurgical Industry Smoke Characteristics and the Affect to the Performance of Electrical Precipitator
Numerical Simulation on the Influence of Heating with Different Arrangement of Burners on the High Performance Hydrogen Bell-Type Annealers
Research on New Thermal Reduction Process of Magnesium Preparation at Ordinary Pressure with Serpentine as Raw Material
The Application of Breakout Prediction System with Thermal Imaging
Monitoring Erosion Profile and Analyzing Reliability for Submerged Arc Furnace
Thermodynamics of Pb(II) Complex Equilibrium in Pb(II)-NH3-NH4CI-H2O System
Optimal Design of Heating System for Annular Furnace
Visualization of Flow-Field between the Flapper and Nozzle in a Hydraulic Servo-Valve
Formation of Protective Cr2O3 Scale at High Temperature and the Effect of Mass Transport in the Presence of Water Vapor
Experimental Study of Sintering Flue Gas Desulphurization with Ferromanganese Ore Slurry
Experimental Study on the Impact of Oxygen Lances on Bath Mixing in EAF
Turbulent Flow of Molten Steel in Thin Slab Continuous Casting Mold
The Coupled Heat and Mass Transfers in the Endothermic Chemical Reaction Packed Beds
Generation and Emission Characteristics of Polycyclic Aromatic Hydrocarbons in Single Coal Coking Process
Effect of Lance Nozzle Angle and Mixing Gas Blowing on BOF Process
Study on Mechanism of Desulfurization by Spent Zn-MnO2 Batteries
Road Performance of Concrete Incorporating Manganese Slag
Combustion Performance and NO Emission in Industrial Furnace under Preheated Air Condition with Different Excess Air Ratio
Large-Scale Rotary Steam Tube Drying System and Equipment for Copper Powder
Numerical Calculation on Steel Coil during Annealing Process
Prediction Model of Micum Strength for Iron Ore Sinter
Improving Repeatability in Different Oxygen Probes at Low Oxygen Potentials in Molten Steel
The Research on Breakout Prevention by Logical Judgement
The Reason for Lose Efficacy of Electromagnetic Clutch Based on Mould Method
Fixation of Thermocouple's Site and Established Value in Course of Desorption of Gold-Loaded Carbon
Chapter 5: Mineral Processing
Effect of Grinding Aids on the Fracture Energy of Mica
Magnetic and Flotation: A Comprehensive Research for Recovery from Zinc Leach Residue
Effects of Galvanic Interaction on Collectorless Flotation Behavior of Galena and Pyrite
Investigation on the Beneficiation of Low-Grade Manganese Ore in Sichuan
Study on the Influence of Precise Ball Size for Mineral Indexes
Research on the Role of Pre-Oxidation in the Separation of Cu-Pb in the Presence of Potassium Dichromate
The Research on Novel Technics for Fluorite Ore Containing Carbonate Minerals
Industry Test on Phosphorus Removal and Direct Reduction of High-Phosphorus Oolitic Hematite Ore
Study on the New Technique for Micro-Particle Cassiterite of Dachang Tailings
Studies on the Effects of Particle Size in Direct Reduction Roasting of Limonite Ores
Application of Small Molecular Inhibitors in Reconcentration of Iron Ore Tailings
Study on Ultra-Fine Grinding and In Situ Modification of Taixi Super-Low-Ash Anthracite
Experimental Study on Recovering Fine Cassiterite from Spontaneously Combusted Dachang Cassiterite-Polymetallic Sulphides
A Flotation Technique for a Sulfide-Oxidized Cu-Co Mixed Ore
Dynamic Analysis of a Novel Structure of Dry Coal Separator
Study on Mineral Processing Flowsheet of a Certain Low Grade Pb-Zn Sulphide Ores
Chapter 6: Mining Engineering
New Developments and Applications of Coal Mine Pressure and Force Monitoring Technology
Experimental Study on Permeability Characteristics of Soft Coal under Higher Confining Pressure
Displacement Analytic Solution of a Deep Elliptical Tunnel in Transversely Isotropic Rock Mass
Reliability Analysis on the Repaired Shaft Project Based on an Improved Response Surface Method
Study on High Efficiency Mining Technology of Adjusting Mining Face
Effect of CMCS on Cure Characteristics of Natural Rubber
Comprehensive Evaluation of Blasting Effects Based on Variable Weight Method and Research on Fuzzy Decision
Rock Failure Mechanism of Air-Decked Smooth Blasting under Soft Interlayer
Analysis on the Stability of Yaoqiao Coalmine Ventilation System
Propagation Mechanism of Coal Rock Fracture under Gas Pressure
Underground Mining Method Selecting System Based on Fuzzy Theory
The Observation and Research for Morphology and Microstructure of Pyrite Whiskers Synthesized by Hydrothermal Process
Chapter 7: Mining Environmental Engineering
The Application of Pre-Grouting in the Construction of Vertical Shaft
Measurement and Analysis of Air Resistance on Baishan Coalmine
An Application of GA on Gas Lift Parameters Optimization
Redesign of the Bucket Wheel Excavators Substructures Based on the Comparative Stress - Strain Analysis
Improvement of Evaluation Methods for Deep Fluid Diverting Agents
The Settlement Prediction and Mining Suggestions of Zhaofeng Gob Area
Research on Geosynthetics in Tailings Dam Reinforcement
Injection Mode of CO2 Displacement in Heavy Oil Reservoirs
Enhance the Process of Sedimentation for Copper Concentrate Pulp Using Combined Reagent
Experimental Research on Characteristic of Particles Transportation in Low-Permeability Gas Reservoirs
Experiment Research of Electric Analogy for Multi-Lateral Wells Considering Frictional Pressure Drop in Wellbore
Virtual Simulation of Ground Scene of the Mining Area
Chapter 8: Mine Survey and Safety Engineering
Mechanical-Thermal-Chemical Coupled Research of Wellbore Stability in Jabung Oil Field, Indonesia
Research of Drilling Complexities in Dabei Belt of Tarim Basin
Finite Element Simulation of Deformation Process of 316L Expandable Slotted Base Pipe at Room Temperature
Study on the Visual Prediction and Analysis Method of Mining Subsidence
Production Simulate Analysis of Multiple-Fractured Horizontal Gas Wells
Complex Activation of Coal Gangue to Al Compounds
Improved Genetic Algorithm for Optimization of Multi-Source Pumping Tree-Type Pipe Network
Study on Double-Frequency Composed Vibrating Compaction Method Based on Resonance and Antifriction Principle
Experimental Study of Organic Pollutants in Waste Water from the Coking Plant Adsorbed by Organobentonite
The Dynamic Finite Element Analysis of Shearer's Running Gear Based on LS-DYNA
Study on Diameter Distribution of Natural Secondary Forest
Experimental Study on Decarburization in Heavy Rail Manufacturing Process
Electromagnetic Methods for Shale Gas Exploration in Southern China
Mould Parts Design Based on Knowledge Fusion of NX
A New Method of Checking Anti-Floating Stability of Buried Horizontal Tank
Feafure Research of Movement and Deformation to Surface of Earth due to Repeadly Mining
Study on the Relationship between the Safety Width of the Distress Zone and the Gas Outburst Danger
Study on Measuring Technique for Metal Tank's Oil Temperature and it's Level
Electrochemical Measurements of Corrosion Inhibition of Mild Steel in Sulfuric Acid by BIMGCS12-3
Numerical Simulation of Shale Gas Production
Study on Engineering Education Training Mode of the Experience-Orientation
A New Nodal Analysis Method of Artificial Lifting System
Characteristics of the Interfacial Wave Velocity on the Liquid Film of Annular Flow for Gas-Oil-Water Three-Phase Flow in a Horizontal Pipe
The Re-Design of Centrifugal Classifier
Numerical Simulation of Liquid-Solid Two-Phase Flow Reflux in Particle Impact Drilling System
Back Analysis of Rockfall Trajectory and its Parameters
Performance Simulation Research of Electronic Controlled Gasoline Engine
Influence of Ultrasonic Wave, Argon Blowing and its Coordinated Treatment on the Nitrogen Content in Low Carbon Steel
Study on Hazard Effects of Gas Explosion in Coal Laneways
Grain Refinement of Direct Chill Cast 7050 Aluminium Alloy with Low Frequency Electromagnetic Field
Optimum Design of Coalbed Methane Reservoir Development Strategies through Numerical Simulation
The Impact on Athlete Health of Sulfate, Nitrate and Ammonium in Atmospheric Aerosol in the Urban Area of Yangtze River Delta, China
A Study on Tunnel Smoke Control Strategies by Experiment and Numerical Simulation