13th International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications (THERMEC)

Preface
Chapter 1: Steel and Pure Metals
Enhancing Cryogenic Strength of Austenitic Stainless Steels through Thermo-Mechanical Controlled Processing and Nitrogen Alloying
Revealing the Microstructure and Mechanical Properties of Rapidly Quenched and Tempered 51CrV4 Steel Processed Via a Continuous Induction Line
Effect of EAF Impurities on Microstructure and Mechanical Properties of Low-Carbon Steels
Impact of Non-Metallic Inclusions and Grain Structures Modified by Fast Heating Annealing on Tensile Properties of a V-Microalloyed High-Mn TWIP Steel
High-Throughput Computational Screening, Non-Metallic Inclusion Analysis, and Microstructural Characterization of a Novel Medium Manganese Steel
Special Steels for the Hydrogen Society
Investigating the Influence of Trace Tantalum on the Microstructure and Mechanical Properties of Niobium Microalloyed Steels
Impact of Aluminum in Comparison to Silicon on Liquid Metal Embrittlement of 3rd Generation AHSS
Evaluating LME Susceptibility in Third-Generation AHSS: The Role of Testing Methodologies and Silicon Concentration
Influence of Quenching Medium on Ordered Phases Formation and Vickers Microhardness of Fe-6.5 Wt%Si
Enhancing Fatigue Performance of Additively Manufactured H13 Tool Steel through Surface Finishing Processes
Influence of Process Parameters Variation on Microstructure and Mechanical Properties of SLM-Printed 316L Stainless Steel
Optimizing Thermal Cycles in Wire-Arc Additive Manufacturing: Investigating Inter-Pass Time and Use of an External Cooling System
Analysis of Generation and Propagation of Fatigue Crack in Oxygen-Free Copper Using Electron Backscattered Diffraction Method
Automated In Situ Thermomechanical Analysis of Cobalt under EBSD
Dynamic Recovery as a Strengthening Mechanism
Chapter 2: Alloys
Thermomechanical Testing and Precipitation Modelling of Al-Mg-Si Alloys for Hot Forming Applications
Microstructure Evolution of Twin-Roll Cast and Hot-Rolled WZ73 Alloy during the Finishing Heat-Treatment
Anisotropic Mechanical Property-Induced Ductilization (AMID) - A New Mechanism to Simultaneously Improve the Strength and Ductility of Multiphase Alloys
Development of Non-Equimolar CoCrCuFeNi High Entropy Alloys for Aerospace Brazing
Effect of Heat Treatment and Rolling Process on Microstructure and Deformation Behavior in Al-Si Alloy
Effect of Subgrain Boundary Distributions on Extra-Hardening of SPD-Processed Al-3%Mg Alloy
Creep Strength of AlCoCrFeNi High-Entropy Alloy Fabricated by Spark Plasma Sintering
A Unique High-Temperature Deformation Mechanism in a CrMnFeCoNi Alloy
Visualization of Dynamic Deformation Behavior of Al-Mg Alloys Using Electronic Speckle Pattern Interferometry
Effect of Zinc Content on the Hitting Sound Characteristics of Brass
The Effect of Intensification Pressure on the Microstructure of Non-Heat Treated HPDC AlSi9MnVZr Alloy
Microstructural Characterization and Analyses of the Damage in a Ti-Based Alloy by X-Ray Computed Microtomography
Damage Development in Aluminum 2050 Alloy during High-Temperature Loading Studied by Synchrotron Diffraction and Tomography
Microstructure and Young's Modulus of (TiZr)2-x(NbTaMo)x Bio-High Entropy Alloys
Experimental and Numerical Investigation of Mechanical Properties of Laser-Welded Additively Manufactured Inconel 718
Cyclic Deformation Mechanisms in a 3D-Printed High-Entropy Alloy

In Situ Alloyed Refractory High Entropy Alloy by Laser Powder Bed Fusion
Low Cycle Fatigue Response of Additive Manufactured Advanced Structural Alloys: Insights into High Performance Alloy Fatigue Life
Comparison of Pd-42Cu-10Ni and Pd-30Cu-29.5Ag-0.5Zn as Probe Material in Interfacial Reaction with Sn
Elevated Temperature Mechanical Properties of Harmonic Structure Designed AlCoCrFeNi High Entropy Alloy by MM/SPS Process
Influence of Hierarchical Structure on Mechanical Properties of Additive Manufactured IN718 Alloys
Chapter 3: Coatings and Corrosion Behaviour of Structural Metals
Compositionally Complex Refractory Metal Nitride Coatings: The Effects of V, Nb and Ta on their Structure and Mechanical Properties
Characterization and Effects of Anodized Aluminum Oxide Film on Additively Manufactured AlSi10Mg Alloy
Electrochemical Synthesis of Ni-Co-W-Zr(P) Quinary Medium Entropy Alloy for Enhanced Hydrogen Evolution Reaction
Copper-Nickel Alloy Coating on Cast Iron by Cold Spray: Microstructure and Thermal Analysis
Effects of Changes in Crystal Structure by Plastic Deformation on Corrosion Resistance of Magnesium Alloys
Effect of Grain Size on the Behavior of Exfoliation Corrosion in Cold-Rolled Mg-14Mass%Li-3Mass%Al Alloy
Neutralization of Impurity Elements of Cu and Ni in Mg-Zn Alloy by Dissolution into MgZn2 Phase
Relationship between Maximum Bending Stress and Surface Roughness of AZ31 Magnesium Alloy Fully Corroded in Salt-Water Environment
Multi-Scale Investigation of Oxygen-Induced Damage in Nickel-Based Superalloy Alloy 718
Effects of Alloying Elements on Marine Corrosion Resistance of Structural Steel
Corrosion Fatigue Property of Steel\Aluminum Alloy Weld-Bonded Lap Joint in High Temperature and High Humidity
Chapter 4: Metal Processing
Forming of Multifunctional Corrugated Cup Using Roller Ball Die
Experimental Studies and Simulation of TRIP-TWIP Roll Bonding
Effect of Wire Electrical Discharge Machining on Hole Expansion Ratio of 1 GPa Low Carbon Low Alloyed Steel

In Situ Synchrotron XRD Analysis of Phase Evolution and its Impact on Mechanical Properties in Quenched and Partitioned Medium-Carbon AHSS
Evaluation of Strain Distribution of Perforated Sheet in Circular Cup Deep Drawing
Effect of Cold-Forming on Mechanical Properties of AHSS Steel
Finite Element Modeling of Electromagnetic Heating
Influence of Si and Process Parameters on the Microstructure and Properties of Continuously Annealed Low C-Nb-Ti Strip Steel
Application of Bi-Modal Milling Process to Fabricate Harmonic Structure Materials
Effect of Annealing Process on Microstructures and Mechanical Properties of Cold-Rolled Martensitic Steels for Automotive Structural Parts
Formulation and Characterization of Stainless Steel-Based Feedstocks for Fused Deposition Modeling: Effects of Binder Composition on Rheology, Printability, Physical, and Mechanical Properties
Laser Surface Hardening of AISI 431 Martensitic Stainless Steel by Using Different Laser Sources
Effect of Intercritical Annealing Temperature to Mechanical Performance of Hot-Rolled Medium Manganese Steel
Research on the Microstructural Evolution of Injection Molded AZ91 and Ultralight LAZ561Ca Magnesium Alloys during Solidification and Heat Treatment: Multiscale Characterizations and Multiphase Field Modeling
Thermomechanical Rolling of Air-Cooled Thick Nb-Ti-V-Ni High Strength Structural Plate
Thermodynamics of Bimetallic Joints between Titanium and Tantalum Produced by Laser Powder Bed Fusion
Fabrication and Bonding Properties of Joints Formed by Transient Liquid Phase Diffusion Bonding Using Electroplated Films
Chapter 5: Welding and Soldering Processes
Effect of Magnesium and Silicon on Temperature and Mechanical Properties in Refill Friction Stir Spot Welding of Aluminum to Titanium
Formation Mechanism of Dense and Uniform Structure during Tailor Welding of Aluminum Foam Structure Preform
Welding Distortion Control in T-Joint Structure of Al-Sheets by Using Pre-Tension
Microstructural Characterisations of Static Strain Ageing in C-Mn Steel Welds of the Secondary Circuit of Pressurized Water Reactors
Creep Properties of P92 Pipe Weld after Annealing at 600 and 650°C
Application of Electron Beam Welding in the Production of TEMPALOY AA1 and T92 Butt Joints of Pipes Assigned for the Energy Industry
Evolution of Inclusions in Physically Simulated Heat-Affected Zones of a Weld Metal Used with a 500 MPa Offshore Steel
Effect of Thermal Cycle Profile on Thermal Fatigue Life of Sn-3.0Ag-0.5Cu Solder Joints for Wafer-Level Chip Scale Package
Degradation Behaviour of Sn-Ag-Cu Lead-Free Solder Joint with Electrolytic Ni Plated Electrode due to Electromigration
Chapter 6: Polymers, Composites and Ceramic Materials
Gelation, Vitrification and Shrinkage of Thermoset Polymers - Methods for Investigation and Modelling
Microstructural and Morphological Evolution of Novel In Situ Al-15%Mg2Si-4.5%Si Composite with Strontium Addition
Fabrication and Thermomechanical Processing of Titanium-Based Laminates for Enhanced Performance under High Dynamic Impact
Phase Field Model of Modification of Microstructure of Al-15Mg2Si- 4.5Si Composite by Addition of Sr during Semi-Solid Processing
Effect of Oxygen on Phase Evolution in Al-Y2O3 Nanocomposites by Mechanical Alloying
Microstructures and Properties of Diffusion Layer Formed at Laminated Interface of Alumina-Particle Dispersed Magnesium Laminated Compacts Fabricated by MM/SPS Method
Mechanical and Thermal Properties of Harmonic Structure Composites with Ti-Ni Alloy and Copper
Structure of Ta2O5 containing Phosphate Invert Glasses Prepared by Liquid Phase Method

In-Situ Observation and Quantitative Evaluation of Dendritic Silver Precipitates Growth inside Borosilicate Glass Substrate
Investigation of Degradation Behavior of Adhesion between Sealing Resin and Copper by Aging Treatment
Microstructures and Hardness of WC-Co and WC-HEA Cemented Carbides Additively Manufactured by the Multi-Beam Laser Directed Energy Deposition
Chapter 7: Computational Materials Science and Materials Informatics
Reduced-Order Representations of Crystallographic Texture for Application to Surrogate Models of Material Behaviour
Simple Flow Rules for Three-Phase Viscoplastic Materials
Modelling Combined Hardening Mechanisms in Alloys through the Analysis of Dislocation Percolation
Redesign of Low-Activation Vanadium Alloys Based on Impurity Control for Fusion Reactor Applications
CALPHAD-Based Modelling of Microstructural Evolution during D.C. Casting and Homogenization of AA3003 Aluminium Alloy
Atomistic Investigation of Stability and Segregation of Alphagenic and Betagenic Solutes in Hexagonal Titanium
Simulation-Driven Insights into Heat Transfer during Copper Mold Casting of Magnesium-Based Bulk Metallic Glasses
Verification of a Novel Mathematical Model for Determination of the Biomass Specific Growth Rate in Bioprocesses Using Relative Change in Biomass Measurements
Numerical Investigation of the Influence of Residual Stresses after Additive Manufacturing on the Fatigue Crack Propagation in 5xxx Aluminum Alloys
Application of Artificial Neural Networks for Microstructure Models ALFLOW and ALSOFT
Sintering Process Analysis of Aluminum Matrix Composites Using Machine Learning
Testing Theories and Simulations on Phase Coarsening by Experiments
Chapter 8: Materials and Technologies for Mechatronics and Energy Conversion
Thermal, Mechanical, and Materials Aspects of a Shape Memory Alloy Stirling Heat Engine
Optimization of Hydrogen Alarm Sensor on Semiconductor Basis
Development of Acoustic Device Using Giant Magnetostrictive Material: Consideration of Acoustic Characteristics of Sound Generated by Wall Surface Vibrations
Accuracy Study on X-Ray Stress Measurement Using Fourier Analysis of Debye-Scherrer Ring
Evaluation of a Low-Cost System for Measuring Thermal Conductivity in 3D-Printed Metallic Structures
Extruded Magnesium Sodium Chloride Anodes for Use in Metal-Air Batteries
Sulfonated Poly(Phenylene Sulfone)s Ionomers
Assessment of Adhesion Degradation in A1050/Epoxy Resin Interface under High-Humidity and High-Temperature Aging Conditions
Evaluation of Joining Properties between Potential-Controlled Ni-Cu Alloy Plating Film and Pb-Free Solder
Effects of Noble Gas Dilution (Ar, Ne, He) on Hydrogenated Amorphous Carbon Films Deposited by Acetylene-Based PECVD
Chapter 9: Materials and Technologies for Biomedical Applications
Enhanced Polyp Adhesion on Chemically Modified Titanium Nonwoven Fabric
Synthesis of Inorganic Semiconductor Films with Narrow Bandgap Responsive to Visible LEDs and their Photo-Response
Smart Materials - Piezoelectric Polyvinylidene Fluoride (PVDF) Composites for Biomedical Applications
Influence of Thermo-Mechanical Processing Conditions on Phase Transformation Temperatures of Nitinol Annuloplasty Rings
Substrate Tubing Heater Suitable for Large Volume 3D Printing with Extrusion of Thermo-Reversible Hydrogels
Binder Jetting of Co-Cr-Mo Alloys for Biomedical Applications: A Tribocorrosion Perspective
Design and Mechanical Evaluation of Ti-6Al-4V Reticular Structures for Biomedical Implants

In Situ Measurement of Micromotion of Acetabular Cup Subjected to Cyclic Load
Development of a Plasma-Based Process for the Deposition of Adherent Diamond-Like Carbon Coating on Titanium Implants
Influence of Rolling Strain Path on Microstructure Evolution and Mechanical Properties of Mg-Zn-Ca Alloy for Orthopedic Applications
Development of a Realistic Brain Phantom for Medical Education: An Ethical and Technical Alternative to Animal Testing
Structure and Dissolution Behavior of ZnO-Containing Phosphate Invert Glasses Prepared by Liquid Phase Method