Materials Design, Processing and Applications

<ul><li>Preface and Conference Organization</li><li>Chapter 1: Non-Ferrous Metal Materials and its Alloys</li><li>Effects of Annealing on Microstructure and Phase Transformation Temperature of NiTiNb Shape Memory Alloy after Equal Channel Angular Pressing</li><li>Research on Dynamic Recrystallization Behavior of near-? Titanium Alloy during near-? Compression</li><li>Structure and Physical Properties of Liquid Ni₂Sb₉₈ Eutectic Alloy</li><li>The Microstructure Evolution and Twinning Characterization of AZ31 Mg Alloy Sheet in Low-Temperature Bending Process</li><li>An Experimental Study of High-Velocity Impact on Aluminum Foam Composite Shield Structure</li><li>Extraction of Tantalum from Ta₂O₅ Using SOM Process</li><li>Reaction Mechanism on Preperation of Ta with SOM Process</li><li>Sintering Characters Analysis of the Al₂O₃-86 Homogenized Bauxite</li><li>Step Reactive Sintering of Ti2AlNb Based Alloy with Element Powders</li><li>Study on Microstructures and Mechanical Properties of Die Casting Mg-xGd-3Y-0.5Zr Alloys</li><li>Study on Sintering Properties of Al₂O₃-70 Natural Mullite by New Processes</li><li>Study on the ZK60A and AZ31B Magnesium-Alloy in the Application on High-Speed Train Seats</li><li>The Effect of Heat Treatment on Microstructure and Performance of Die Forging Copper</li><li>Yield of Alloying Elements Fed by Cored Wire into A Copper Melt</li><li>Effect of Cooling Mode on Properties of a Cast Zinc Alloy</li><li>Effects of Cr Substitution of Mo on the Formation and Mechanical Properties of FeCoMoCrZr Amorphous Alloys</li><li>Study of Thermal Stability of Magnesium Alloys</li><li>Direct Electrolytic Reduction of Solid Cr₂O₃ to Cr Using SOM Process</li><li>Electrochemical Behaviors of Die-Cast Mg-4Al-0.4Mn-Xpr (x=0, 1, 4) Alloys in NaCl Solution</li><li>Chapter 2: Iron, Steel and its Alloys</li><li>Alloy Design and Application for Avoiding Carbide Network of CrWMn Steel by Phase Equilibrium Thermodynamic Method</li><li>Atmospheric Corrosion Behavior of Salvaged Marine Cast Iron Artifacts</li><li>Characterization of Passive Film Formed on X80 Pipeline Steel in Sodium Bicarbonate Solution</li><li>Development of Hot Rolled Ship Plate with High Strength and High Toughness</li><li>Effect of Rare Earth on Microstructure and Mechanical Property of Ferrite Stainless Steel</li><li>Effect of Slag Composition on Total Oxygen of High Speed Wheel Steel</li><li>Failure Analysis on Fracture of 16Mn Steel</li><li>Green Manufacturing Operation Mode for Iron & Steel Enterprise</li><li>Improvement of Radiation-and Thermal Stress-Induced Springback Degradations in Invar Alloy Using Repeated Radiation Plus Hot-Then-Cold Treatments</li><li>Intergranular Corrosion Behavior of 00Cr12 Ferritic Stainless Steels Containing Cerium</li><li>Microstructure Evolution and Grain Boundary Characteristics of Oriented Silicon Steel during Primary Recrystallization in a Pulsed Magnetic Field</li><li>Microstructure Refinement of Hypereutectic High Chromium Cast Iron with Electric Current Pulse</li><li>Recrystallization Thermal Simulation Experiment for a Micro-Alloy Steel</li><li>Research on a New Secondary Creep Model and Creep Damage Evolution for P92 Steel</li><li>Research on Fatigue Behavior of Beam with Corrugated Steel Webs</li><li>Research on Molten Steel Flow with Electromagnetic Stirring</li><li>Research on Powder Metallurgy High Nitrogen Stainless Steels</li><li>The Effect of Finish Rolling Temperature on Microstructure and Mechanical Properties of Vanadium Containing Ferritic Stainless Steel</li><li>The Effect of Microstructure on Properties of High Deformation Pipeline Steel X70</li><li>The Investigation in the Influence of Hardness to Transition Point after Tempering for Boric Carbon Steels</li><li>Thermodynamic Analysis and Observation of Inclusions in H13 Die Steel with Rare Earth</li><li>20#,60Si2Mn,9Cr18MoV Steel Ferrite Area Dynamic Recovery and Recrystallization Research</li><li>Beneficiation Study on an Oolitic Hematite</li><li>Corrosion Property of a New Repair-Free Steel Developed for Bottom Plate of Cargo Oil Tanks</li><li>Effect of Loading Rate on Tensile Properties of Automotive Steel Sheet</li><li>Effect of Secondary Cooling on Non-Oriented Electrical Steel Strips Produced by Twin-Roll Casting Process</li><li>Effect of Tempering Process on Residual Stress in Hot Rolled Low Carbon Martensite High-Strength Steel Strip</li><li>Hot Ductility Behavior of 800MPa Ultra High Strength Niobium Containing Steels</li><li>Numerical Simulation on Collision and Aggregation Process of Al₂O₃ Inclusions with Different Morphology Characteristics</li><li>Research on Using Limestone for Slagging during BOF Steelmaking Process</li><li>Study on Desulfurization Kinetics Model of LF Refining</li><li>Study on Initial Oxidation Film Formation Mechanism of T23 Steel at 600 degreesC</li><li>The Implementation of Steelmaking MES for Pangang Group</li><li>The Investigation on Wire Rod Materials of Low Carbon Steels and Extra Low Carbon Steels</li><li>Influence of Heat Treatment on Microstructure and Properties of Ultrahigh Strength Fe-Ni-Co Alloy</li><li>Corrosion-Resistant Alloys for Tubings and Casings and Alloy Material Selection in Oil and Gas Wells</li><li>Effect of Water Vapor on Oxidation of Ferritic Stainless Steel 21Cr-0.6Mo-Nb-Ti in Simulated Reheating Environment</li><li>Study of the Effect of W and Mo Binary Alloying on Fe-Ni36 Invar Alloy Properties</li><li>Effect of Pre-Oxidation on the High Temperature Oxidation Behavior of Fe-Cr-Al Powder Porous Metal</li><li>Experimental Research on Size Effect of Magnetic Hysteresis Loop for Q235 Steel</li><li>Chapter 3: Composites</li><li>Analysis and Research on the Microstructure Fractal Characteristics of the Copper Matrix Composites</li><li>Dynamic Analysis of the Rotating Composite Thin-Walled Cantilever Beams with Shear Deformation</li><li>Finite Element Model and Bending for Marine Composite Flexible Pipes</li><li>High-Temperature Dry Sliding Friction and Wear Characteristics of As-Cast SiC_P/A356 Composite</li><li>Influence of Fiber's Surface State on Mechanical Properties and Fiber-Matrix Interaction of CFRP</li><li>Microstructure and Properties of Deformation-Processed Cu-Cr <i>In Situ</i> Composites</li><li>Preparation of the High Temperature Resisting Material with Al-CrO₃ System by SHS</li><li>Study on High-Speed Milling Force of SiC_p/Al Matrix Composite</li><li>Synthesis and Characterization of MgFe₂O₄ /MgO Composite Films from Layered Double Hydroxides Precursors</li><li>Synthesis Method and its Influence Factors of Hydrotalcite-Like Compounds</li><li>The Influence of AC Perturbations on EIS Measurement of Copper/LDPE Composite with High Resistance</li><li>The Sorting Method of the same Pattern Compound Material Based on Basic Element Model of Surface Microstructure</li><li>Vulcanization Kinetics of Starch Xanthate /Natural Rubber Composite</li><li>Application of Diffraction and X-Ray Microanalysis in Study of MMC Structure</li><li>Influence of Temperature on Carbonation Pellet for Ferrous Dust</li><li>Innovative Utilization of a Borate Additive in Magnesium Production to Decrease Environmental Impact of Fluorides from Pidgeon Process</li><li>Microstructure and Formation Mechanism of Two-Liquid Bimetal Composite Interface</li><li>Morphology and Property of Polypropylene Composites Filled with Modified Attapulgite</li><li>Parameters Optimization of Steel Wire Reinforced Thermoplastics Composite Pipe</li><li>Preparation and Characterization of Hydroxyapatite Whiskers</li><li>Preparation SiC Ceramic Composite Filtration Membrane Materials by Dry Pressing and Synchronous Sintering Method</li><li>Silty Clay and Fibre Interaction</li><li>Study on Film-Forming Technique of Aluminum Composite Membrane Prepared by Inorganic Precursor Sol-Gel Method</li><li>The Research Progress of Nitinol Vascular Stent</li><li>Fabrication and Characterization of NiO_x/Bi₂WO₆ with Enhanced Photocatalytic Activity under Visible Light Illumination</li><li>Study of Microstructure and Properties of Corundum-Calcium Hexaluminate Composite Aggregate</li><li>Adsorption of Congo Red from Aqueous Solution onto Chitosan/Rectorite Composite</li><li>Chapter 4: Micro / NanoMaterials and NanoTechnologies</li><li>A Molecule Computing Model for Maximum Independent Set Problem Based on DNA/AuNP Conjugation</li><li>Preparation and Photocatalytic Activity of Gadolinium-Doped ZnO Nanocrystalline Powders</li><li>Preparation of Nanosized Barium Titanate Powder by a Direct Reactive Precipitation Method</li><li>The Development of Nanocrystalline Materials Prepared by Electrodeposition</li><li>The Effect of PEG on the Preparation of Hydroxyapatite</li><li>The Effects of Surfactants on the Topography of HA</li><li>The Research of Influence on Fe-N Alloy Magnetism from Experiment Parameters</li><li>A Novel Hybrid System for the Fabrication of Electrospun Mat with Microspheres</li><li>Enhanced Field Emission from Carbon Nanotubes Coated by Nanoparticles of Turbostratic Stacked Graphenes</li><li>Preparation of Aluminum Nanoparticles and Oxidation Mechanism of Nano- and Micro-Particles</li><li>The Preparation and Properties of Porous Scaffold Made of Nano-Hydroxyapatite/Polyamide66</li><li>Studies on Crystallizations and Mechanical Properties of Polypropylene/Nano-TiO₂ Composites</li><li>Thin Film Microcircuit Preparation in a Diamond Anvil Cell</li><li>Micro-Structure of a Special Sericite-Jade: A Preliminary Study Using XRD and SEM Analysis</li><li>Preparation of Expanded Graphite with Fe₃O₄ Nanoparticles</li><li>Study on Catalytic Efficiency of Ag/N Co-Doped TiO₂ Nanotube Arrays under Visible Light Irradiation</li><li>A Novel 5-Fluorouracil-Loaded Polyelectrolyte Nanoparticle Formulation</li><li>Aligned Nanofiber Arrays and Twisted Nanofiber Ropes via Electrospinning with Two Frames Collector</li><li>Chapter 5: Ceramic</li><li>Effect of Type and Amount of Wetting Agent on the Formability and Bending Strength of Vitrified Bond Diamond Abrasives</li><li>Synthesis of Al₂O₃ Ceramics Matrix Composites by Thermal Explosion under Pressure and Hot Pressing</li><li>Fabrication of ZrB₂-Based Ceramics Doped with ZrSi₂</li><li>Study of Domains and Size Effect of Curie Temperature in BaTiO₃ Nanoceramics</li><li>Study on Grindability Evaluation of Ceramic Materials Based on Interval Gray Principal Component Analysis</li><li>The Progress of Amorphous Si-B-C-N Composite Ceramics</li><li>Chapter 6: Optical/Electronic/Magnetic Materials</li><li>Emission Color Variation of Sr₃SiO₅:Ce³⁺, Li⁺ Phosphor for Near-UV Light-Emitting Diodes by Co-Doping with Mg²⁺ and Ba²⁺</li><li>First-Principles Investigations of Structural Stability of LuN</li><li>Inaln/GaN HEMT Small-Signal Parameter Extraction</li><li>Influence of Deposition Temperature of ZnTe Films on Silicon by Thermal Evaporation</li><li>Preparation and Characterization of a Novel Gadolinium Triple-Decker Sandwich-Type Complex with Tetrabenzoporphyrin Ligand</li><li>An Integrated Evaluation Model for New Product Development in Light-Emitting Diode Plant Lighting Industry</li><li>Casted Strip Character of Twin-Roll Casted High Strength Non-Oriented Electrical Steel</li><li>DFT Studies on the Electronic Spectrum and the Second-Order Nonlinear Optical Properties of Donor-Acceptor Helicenes</li><li>Ferromagnetic Material of the Nearly Half-Metallic Alloy Co₂TiGa</li><li>Luminescence Properties of ZnO:Eu³⁺ Red Emitting Phosphor Prepared by Precipitation Method</li><li>Magnetic Material Based on Full-Heusler Alloy Co₂CrGa</li><li>Structural Stability, Electronic and Optical Properties of Ni-Doped Boron Carbide by First Principles Calculation</li><li>Study the <i>I</i>-<i>V </i>and <i>C</i>-<i>V</i> Characterization of n-ZnO/p-Si Heterojunction</li><li>Study of Optical Characteristics of H₂S Molecule Adsorption on Ag_n (<i>n</i>=3,5) Clusters</li><li>Preparation of Stilbene-Eighteen Alkyl Quaternary Ammonium Salts as Fluorescent Brightening Materials and Surfactants</li><li>Synthesis and Properties of Novel Hole-Transporting Materials Containing Triphenylamine and Bipyridine Units</li><li>Electronic Properties of Zno Doped by Rare-Earth Elements from First-Principles</li><li>The Influence of B₂O₃ on the Luminescence Behavior of ZnGa₂O₄ Phosphor at Different Sinter Temperatures</li><li>Chapter 7: Functional Materials</li><li>Carbon Cloth Diffusion Layer for Fuel Cell Electrode</li><li>The Influences of Zirconia on the Properties of Magnesia Alumina Spinel Bricks</li><li>Ti₂AlC/TiC Functionally Graded Material Fabricated by Reaction Sintering</li><li>The Microstructure and Thermochromic Properties of La_1-XSr_XMnO₃ Smart Materials</li><li>Investigation on the Creep property of Theoretical Composition Magnesia Alumina Spinel Bricks</li><li>Influence of Fe₂O₃ on the Hydration Resistance of MgO-Al-C Bricks</li><li>Effects of Sodium Salt on Hot Mechanical Properties and Microstructure of MgO-Al-C Bricks</li><li>Use of Waste Tire Rubber Particles as a Part of an Aggregate Added to Thermal Insulting Mortar</li><li>Chapter 8: Building Materials, Construction, Soil Behavior, Architecture and Urban and Land Planning Applications</li><li>Building Energy-Saving Technology and its Application Based on Low Carbon Concept</li><li>Built-In Spiral Ripe Thin-Walled Square Steel Tube Concrete Column of Nonlinear Finite Element Analysis</li><li>Effects of Clay on Flow Properties of Polycarboxylate Superplasticizer and its Control Measure</li><li>Effects of Ferrocement in Strengthening the Serviceability Properties of Reinforced Concrete Structures</li><li>Elementary Discussion on the Treatment of Old Road Problems in Upgrading and Reconstructing for the Road</li><li>Finite Element Analysis for Concrete Filled Double-Skin Steel Tubular Stub Columns</li><li>Preparative Techniques and its Performance of Chemically Foamed Cement Paste</li><li>Research on Building Low-Carbon Hotels from the Perspective of Circular Economy</li><li>Research on Mass Concrete Construction Techonogy of Raft Foundation of Hongyun Building</li><li>Short- and Long-Term Deflection of Concrete Structures</li><li>Stability Bearing Capacity of Concrete Filled Thin-Walled Circular Steel Tubular Column under Axial Compression</li><li>Study on Clinker Production Using Magnesium Slag on a 4500tpd Line</li><li>Study on Crack Spacing and Width of Expansive Soil due to Evaporation</li><li>Study on Medium Density Radial Bamboo Curtain Composite Plybamboo</li><li>Study on Particle Characteristics of Cement by Vertical Roller Mill Finish Grinding</li><li>Study on the Axial Ultimate Bearing Capacity of Concrete-Filled Square Steel Tubular Stub Columns</li><li>Test of Dynamic Strength Characteristics of Paleosol</li><li>Test Research on Stiffness of Loaded Concrete Beams Strengthened with Prestressed CFRP Sheets</li><li>The Affecting Factors of Slope Stability Based on Orthogonal Design</li><li>The Effects of Steel Content for the Mechanics Performance of Fiber Modified Polymer Resin Concrete</li><li>The Guidance Pattern of Countryside Sustainable Development of Three Gorges Reservoir in Chongqing</li><li>The Influence on the Concrete Durability in Bleed Air Performance Caused by Concrete Admixture</li><li>The Inhibition Studying of Many-Doped Mineral Admixture for Concrete Alkali Silicate Reaction</li><li>The Inhibition Studying of Single-Doped Mineral Admixture for Concrete Alkali Silicate Reaction</li><li>The Inspiration from the Slow-Traffic and Lingering Characteristics of the Inhabited Bridge</li><li>The Studying of Reinforcement Mechanism of Fully Grouting Rock Bolt in Brittle Wall Rock Mass</li><li>Towards a Competitive City: Shanghai's Urban Development</li><li>Unified Solution of the Ultimate Bearing Capacity for Stiffened and Thin-Walled Square CFST Short Columns under Axial Compression</li><li>A Review of Detection, Evaluation and Repair Technology for Hydraulic Concrete Structures</li><li>Active Countermeasure Mechanism to Waste Dump Based on Spatial Effect</li><li>Analysis on Characteristics of Ancient Kiln Village in Mengjiajing</li><li>Analysis On Morphology Of Settlement and Residence In Wangyu Village</li><li>Analysis on Seismic Behavior of Structures Supported by Foundations with Different Locations</li><li>Concrete Slab Value Stream Mapping of Brazilian Residential Buildings - a Lean Construction Study Case</li><li>Effect of Pore Structure on the Chloride Permeability of Concrete with Mineral Admixture</li><li>Energy Conservation Technology in BedZED and the Enlightenment for China</li><li>Evolution and Significance of the Residential Area of Landscape Design</li><li>From the National Historical and Cultural City of Shanxi DaiXian see Ancient Frontier Town History Culture and the Characteristics of the Development of City</li><li>From the View of Qujia Courtyard House of Shan Xi Dwellings Traditional Cultural Value</li><li>Method and Trend of Residential Landscape Design</li><li>Paying Attention to the Application of Ecological Strategy to Construction Design</li><li>Production of Concrete Blocks with Residues for Civil Construction</li><li>Protection and Sustainable Development of Jiexiu Ancient City</li><li>Chapter 8: Building Materials, Construction, Soil Behavior, Architecture and Urban and Land Planning Applications</li><li>Research and Application of Corundum Based Self-Flowing Castable Refractories</li><li>Research on Axial Behavior of Thin-Walled T-Shaped Steel Stub Columns Filled with Recycled Demolished Concrete Lump</li><li>Research on Spacial Displacement Regulations in Soft Surrounding Rock Tunnel</li><li>Soil Erosion Assessment in the Watershed of Dehua District of Fujian Province</li><li>Studies on RC Beams Strength with Steel Wires Using Nolinear Finite Element Method</li><li>Study on Influencing Factors of CFST Arch Bridge Stability</li><li>Study on Recognized Mode of the Revolutionary Site Protected Object in Traditional Village</li><li>The Cause of Cracks in the Cement Concrete Pavement of County-Highway and Precautionary Measures</li><li>The Finite Element Analysis of Thin-Wall Ribbed Square Steel Tube Recycled Concrete Bias Column Mechanical Properties</li><li>Thermal Conductivity of Fired Clay Bricks Incorporated with Cigarette Butts</li><li>Study on the Natural Vibration Characteristics of Jointed Slope</li><li>The Evaluation System of Urban Low-Carbon Level</li><li>Analysis of the Effect of Natural Slope Stability due to Tunnel Excavation in Mountainous Areas</li><li>Chapter 9: Energy Materials</li><li>Effect of Argon Gas Flow on the Thermal Field in a Directional Solidification System for Multi-Crystalline Silicon</li><li>Effect of Sodium-Based Slag Treatment on the Distribution of Impurities in Metallurgical Grade Silicon</li><li>Maximized On-Demand Hydrogen Generator Design</li><li>Purification of Silicon by Solvent Refining with Si-Sn Alloy</li><li>Studies on the Electrochemical Behavior of Sio/C Anode Materials by AC Impedance Method</li><li>Summarize the Studies on Improving the Electrochemical Performance of Spinel LiMn₂O₄</li><li>Temperature Distribution of Multi-Crystalline Silicon Ingots in the Directional Solidification Process</li><li>Cathode Material Li [Li_0.2 Mn_0.44Ni_0.18Co_0.18]O₂ Synthesized by Molten Salt Method</li><li>Fabrication of Micro DMFC Stack Using MEMS Technology</li><li>Mathematical Modeling of a DMFC Cathode with a Double Catalyst Layered Structure Membrane Electrode Assemblies</li><li>Chapter 10: Environmental Friendly Materials, Treatment and Removal Technologies</li><li>A Technological Method to Improve the Filtration Efficiency of Fiber Materials</li><li>Effects of Laccase on the Properties of Hemp Fabric</li><li>Experimental Study on Cr⁶⁺ Adsorption in Water about the Daily Waste Peanut Shell</li><li>Preparation and Mechanical Properties of the Environmentally Friendly Wood-Plastic Composites</li><li>Preparation of Calcium Sulfate Anhydrate Whisker and a Primary Investigation of its Arsenic Removal Performance</li><li>Removal of Natural Organic Matter of Artificial Lake by Modified Fly Ash</li><li>Study on the Environmental Friendliness of Biomass Dishware Based on Life Cycle Assessment</li><li>Surface Morphology and the Adsorptive Behavior of Coconut Active Carbon</li><li>Adsorption Characteristic of Steel Slag Haydite for Phosphorus Removal from Wastewater</li><li>Adsorption of Cr(VI) from Aqueous Solution by two Kinds of Pillared Bentonites</li><li>Column Experiment on Cr (VI) Reduction with SiO₂-Coated Fe Nanocomposites</li><li>Early Strength Characteristics of Palm Oil Fuel Ash and Metakaolin Blended Geopolymer Mortar</li><li>Influence of Organic Alkali on the Preparation of Lignin-Based Anionic Adsorbents and their Performance in the Removal of Nitrate</li><li>Strength and Durability Characteristics of Polymer Modified Concrete Incorporating Vinyl Acetate Effluent</li><li>Study on Production Technology of Paper Wooden Compound Pallets</li><li>Synthesis of Epoxidized Soybean Oil via Phase Transfer Catalysis</li><li>Tertiary Treatment of Paper Industries Effluent with Advanced Electrochemical Oxidation Process in the Presence of Modified Bentonite Powdery Electrodes</li><li>Analysis on Distribution Law of Damaged Filters for Bag Dedusters in Coal-Fired Power Plants</li><li>Factors Influencing the Removal of As(V) from Groundwater by NF/RO</li><li>Effect of Preparation Method on Photocatalytic Activity of Titanium-Bearing Blast Furnace Slag</li><li>The Influence Factors of Compressive Strength and Production of Mineral Polymer of Aluminum Rocks in Xiuwen County, Guizhou Province, China</li><li>Characterization of some Key Industrial Waste Products for Sustainable Concrete Production</li><li>A Study on Wellsite Wastewater Reinjection Stratigraphic Control in Changqing Oilfield</li><li>Effects of Latency Removal on the Fiber Properties of Poplar APMP</li><li>Green and Efficient Coal Slurry Drying Process</li><li>Study on Factors and Operation of Granulation Method for Strontium Removal</li><li>The Influence of Ph Value on the Treatment of Direct Sun-Proof Dyes Wastewater by Iron Trichloride</li><li>Preliminary Study of Utilizing Ozone in Treatment of Operationally Exhausted Metalworking Fluids</li><li>Purification Effect of Self-Aeration Constructed Wetlands on COD</li><li>Research on Removing Radioactivity Minerals Form Titanium Rough Concentration of Haibing</li><li>Selection of Substrate Diameter and Filling Thickness for Artificial Wetland</li><li>Study on Cyclone Dust Removal Equipment after Dense Phase Semi-Dry Flue Gas Desulfurization System</li><li>Effect of Wet Storage on High Yield Pulping with H₂O₂-CoSO₄</li><li>Chapter 11: Earthquake Resistant Structure, Materials and Design</li><li>Dynamic Response of the Compound Structure of Foam Aluminum Core Composite Sandwich Material to the Shock Wave of Gas Explosion</li><li>Seismic Hazard Estimation in East China Offshore Areas</li><li>Aeolic and Seismic Structural Vibrations Mitigation on Long-Span Cable-Supported Bridges</li><li>On the Generation of Seaquake Velocity Fields for Submerged Floating Tunnel Structures</li><li>Chapter 12: Biomaterials and Biotechnology</li><li>Activation Energy of Pure and Impregnated Lignocellulosic Materials Obtained by Isothermal Method</li><li>Adsorption of Acid Red by Porous Chitosan Film</li><li>Asymmetric Synthesis of Ethyl (<i>R</i>)-4-Chloro-3-Hydroxybutanoate with a Two Recombinant <i>Escherichia coli</i> System</li><li>Comparison of the Roles of Tea Polysaccharides and Polyphenols in Growth Inhibition of Hepatoma H22 Cells in Mice</li><li>Effects of the Protein in Wheat Straw on Enzymatic Hydrolysis</li><li>Enzymolysis Optimization of Walnut Residue Protein Using Trypsase</li><li>Immunomodulatory Activity in Vivo of Porcine Cartilage Polysaccharide Nanoparticles on Murine H₂₂ Hepatocarcinoma Cells</li><li>Influence of Cortical Layer Thickness of Alveolar Bone on Stress Distribution over Implant Supported Region</li><li>Kinetics Study of Vitamin A Precursor Synthesis by Immobilized Lipase-Catalyzed Regioselective Monoacetylation in <i>n</i>-Hexane</li><li>Mechanism of Peptide Changes during Drying Fermented Soybean Meal</li><li>Numerical Simulation of Cell Growth Pattern and Determination of Fractal Dimension of Cell Cluster</li><li>Optimization of Multi-Strain Solid State Fermentation to Improve the Content of Soybean Meal Protein by Response Surface Analysis</li><li>Optimization of Solid State Fermentation to Improve the Degree of Hydrolysis Soybean Meal Protein</li><li>Preparation and Characteristics of Chitin-Gelatin Composite Film</li><li>
<i>Prokaryotic</i> Expression and Purification of Tomato Cnr Protein</li><li>Protein Extraction of the Long-Term Room Temperature Storage Wheat Straw</li><li>Research on Oxidation of Phenanthrene to Phenanthrenequinone with TBHP</li><li>Selectivity of the Cycloaddition of Tert-amyl Alcohol and ?-methylstyrene</li><li>Studies on Charcoal Block Production from Three Charcoal Types of Biomass Employing Screw Press Unit</li><li>Study of Physicochemical Properties of Chinese Small Cabbage(<i>Brassica chinensis L.</i>) Stored at Four Temperatures</li><li>Study on Hydrophobic Microorganism as Coal Bio-Desulfurizing Agent</li><li>Study on the Isolation of Polysaccharide from Purple Sweet Potato by DEAE-Cellulose 52</li><li>Synthesis and the Study of Oil Displacement Performance of Stearate-2-Hydroxy-3-Propane Sulfonic Acid Sodium Salt</li><li>The Assessment of Sweet Sorghum Straw Bio-Feed Fermentated by the Compound Microbial Agent in Bags and Cellar Pits</li><li>The Classification and Characteristic of Proteins in Wheat</li><li>The Effects of Rhodiola Tibetica on Lung Tissue of Rats with High Altitude Pulmonary Edema</li><li>The Wool Shrink-Proof Technology of Sericin Bonding Wool</li><li>Construction of Expression Vector with Fruit-Specific Promoter and Genetic Transformation of Strawberry</li><li>Determination and Identification of Chondroitin Sulfate from Tilapia Byproducts</li><li>Effect of Xylanase Treatment on Papermaking Properties of Poplar High Yield Pulp</li><li>Emulsifying and Foaming Properties of Wheat Gluten Influenced by High Pressure Microfluidization</li><li>Flame Retardation of Wood</li><li>High-Purity Isolation of <i>Trans</i>-Resveratrol from <i>Rhizma Polygoni Cuspidati</i> by High-Speed Counter-Current Chromatography</li><li>Investigation of Airflow Influence on Self-Heating Process of Linseed Oil Using Safety Calorimeter SEDEX</li><li>Isolation of Saccharomyces Cerevisiae GJ03 from the Spontanous Fermentation Orange Wine and Application in the Course of Orange Wine Brewing</li><li>Mechanisms and Defiberation Point of Dendrocalamus Giganteus Munro Kraft Pulping</li><li>Optimization of The-Hydrolysis Parameters of Dissolving Pulp of Fast-Growing Poplar Producing</li><li>Preparing Gambiered Guangdong Silk with Ultraviolet Radiation and Normal Mud/Fe²⁺</li><li>Purification and Preliminary Characterization of a Thermostable Lactase from <i>Bacillus coagulans</i> T242</li><li>Research on the Antioxidation of Torreya Grandis Alcohol Extracts in Cholesterol-Fed Rats</li><li>Simulating Glycolytic Metabolism of <i>Escherichia coli</i> by Using Optimal Control Models</li><li>Studies on the Preliminary Characterization of a Novel Exopolysaccharide Produced by <i>Streptococcus thermophilus </i>Strain from Tibetan Kefir Grain</li><li>Study on Deproteinization of Polysaccharide from Corn Silk with Cetyl Trimethyl Ammonium Bromide</li><li>Study on Furfural Production from Hemicelluloses</li><li>Study on Plant Growth Regulation Activity of the Low Polar Fractions from <i>Mikania micrantha</i> H.B.K. on <i>Phaseolus radiaus</i></li><li>Study on the Emulsifying Properties of Tilapia Skin Gelatin</li><li>Study on Extraction of Wasabi Plant Material Bio-Activity Substances and Anti-Cancer Activities</li><li>Study on Extraction Technology of Polysaccharide from <i>Pleurotus ostreatus</i></li><li>The Ameliorative Effect of CPCC and Role of CRT in Hepatic Injury by Alloxan-Treatment</li><li>The Influence on the Milk Yield and Milk Composition of the Cows after Feeding with the Sweet Sorghum Straw Fermented by the Compound Microbial Agent in Bags</li><li>The Spectrum Properties of Type ? Collagen Self-Assembly Film</li><li>Theoretical Investigation on Tautomerization Mechanism of 6-Thioguanine</li><li>Ugonin K Induces Cell Cycle Arrest and Apoptosis through Reactive Oxygen Species/Apoptosis Signal Pathway in Human Skin Cancer Cells</li><li>Clean Method for Stickies Control with StickAway Enzyme in ONP Pulps</li><li>Influence of Surface Zeta Potential on Adhesion of <i>Chlorella sp. to Substratum Surfaces</i></li><li>Study on Amphiphilic Macromolecules Adsorbent of Cellulose Mixes Ether Based on Cotton Stalk</li><li>Production and Utilisation of Non-Conventional Coke</li><li>High-Consistency Electrochemical Delignification of Poplar Kraft Pulp</li><li>Gold Immunochromatography Assay - A Newly Rapid Detection Technique for Aquatic Products</li><li>Using of Magnesium Hydroxide and Sodium Hydroxide in DP Beaching of NaOH-AQ Wheat Straw Pulp</li><li>Preparation and Characterization of Regenerated Wool Protein PAN Blended Fibers</li><li>Biocompatibility Research of the Biphasic Calcium Phosphate Composite Ceramic Film Obtained through Micro-Arc Oxidation on the Medical Titanium Surfaces</li><li>Determination of Ignition Temperature of Organic Dust Layers</li><li>Chapter 13: Chemical Materials and Chemical Technology</li><li>Preparation and Characterization of Alkylethoxyethanesulfonate in Superbasic System KOH-DMSO</li><li>Preparation and Properties of Modified Lignin Used as Additive of Brown Coal CWS</li><li>Preparation of Aromatic Silanes as High Thermal Stability Coupling Agents</li><li>Removal Efficiency and Distribution Characteristics of PAHs in Coking Plant Contaminated Soils by <i>In Situ</i> Chemical Oxidation Remediation</li><li>Cascaded Columns of Total Reflux Batch Distillation with Periodic Liquid Exchange</li><li>Effects of Microwave Power on Performance of Pt/CeO₂MWCNTs Catalysts Prepared by Microwave-Assisted Polyol Process for Methanol Electrooxidation</li><li>Experimental Study of Optimal Coagulation Effect on Three Kinds of Direct Sun-Proof Dyes by FeCl₃</li><li>The Evaluation of Factors Affecting the Performance of Heavy Oil Emulsion</li><li>Kinetic of C.I. Reactive Black 5 by Fenton-Like Oxidation</li><li>Research on Tubing and Casing Corrosion in Sour Gas Reservoirs and Corrosion-Resistant Material Selection</li><li>Material Selection of Water-Ring Vacuum Pump in Yellow Phosphorus Tail Gas Industry</li><li>Preparation of Strontium-Barium Hydroxyapatite by Coprecipitation</li><li>Modified Cuo/ZnO/Al₂O₃ Catalysts for Methanol Synthesis from Co and CO₂ Co-Hydrogenation</li><li>Study on the Reaction Kinetics and Catalytic Stability of Pillared Bentonite in Heterogeneous UV-Fenton Process</li><li>Distribution and Bioavailability of Nitrogen Species in Street Dust from Small Towns in Yongchuan, Chongqing</li><li>The Characteristics of Trace Metal Elements Accumulation and Distribution in Elsholtzia Harchowensis</li><li>Dyeing of Cotton Fabric Modified by 2, 3-Epoxpropyl Triethyl Ammonium Chloride with Reactive Dyes</li><li>Chapter 14: Polymeric Materials</li><li>Adhesion Loss in Antistripping Agent Treated Asphalt Binders due to Moisture</li><li>Experimental Research on the Solubility of Cellulose in Different Ionic Liquids</li><li>Influence Analysis of the Parameters on Sound Absorbing Performance for Polymer Wool</li><li>Preparation and Properties of Silane-Terminated Poly(urethane-Imide)</li><li>Preparation of High Heat-Resistant Profile Based on PVC/?-MSAN/ABS Ternary Blends</li><li>Study on Properties of Enzymatic Hydrolysis Lignin (EHL) and Chloride Polyethylene (CPE) Composites</li><li>Study on Relationship between BPA Migration and Thermal-Oxidative Aging Degree of Polycarbonate</li><li>Synthesis of a New Water-Soluble Conjugated Polymers Containing Thiazoline Moiety for Antibacterial Activity Bioassay</li><li>Synthesis of Quaternary Ammonium Cationic Polymer PEA</li><li>Synthesis of UV-Writing Fluorinated Polymer for Organic Optical Waveguide</li><li>The Studies on Crystallization of Polypropylene (PP)/Nano-TiO₂ Composites under Microwave Irradiation</li><li>The Swelling Kinetics Study of Hydrogels Prepared by the Different Finesses Degrees of <i>Eupatorium Adenophorum</i></li><li>Emulsifier-Free Core-Shell Hybrid Latexes from Castor Oil-Based Waterborne Polyurethane and Polyacrylate Containing Fluorine and Silicon</li><li>Research on the Relationship between the Productivity of Antarctic Krill Chitin and its Fineness of Grind</li><li>Synthesis and Properties of a Castor Oil-Based UV-Oligomer Comprising of Side-Chain Benzophenone</li><li>The Best Dosage of Polymer Dispersant in WDG by Zata Potential Method</li><li>The Surface Modification and Characteristics of Useful Expanded PTFE Composites by Photo-Radiation Methods</li><li>Study on Pretreatment Agent for Anti-Clogging in Polymer Flooding Wells</li><li>Synthesis of Poly(acrylic Acid Dodecyl Ester-Styrene-Maleic Anhydride) Terpolymer and Surface Modification of Glass Fiber</li><li>Study on the Preparation of 2-Phenyl Imidazole Microcapsule and its Effect on Curing Epoxy Resin</li><li>Chapter 15: Thin Films and Technology</li><li>Aluminum-Induced Crystalization of Amorphous Silicon Films Deposited by Megnetron Sputtering</li><li>Electrodeposition and Properties of CuInS₂ Thin Films</li><li>On the Mechanism of Copper Oxide Reduction by Dielectric Barrier Discharge Plasma Using H₂ and Ar Mixture Gases</li><li>Preparation and Properties of Cu₂ZnSnS₄ Nanoparticles by Solvothermal Method</li><li>Properties of Ohmic Contact of Au Electrode on Polycrystalline Mercuric Iodide</li><li>Characterization of TiO₂ Composite Film on Steel Obtained in Aluminate Electrolyte by PEO and the Photocatalytic Activities</li><li>Effects of Preparing Conditions on NO₂-Sensing Properties of Sputtered WO₃ Nano-Films</li><li>Electrochromic Property of Sputtered Amorphous NiO Films</li><li>Hydrogen Induced Modifications of Optical and Electric Properties in Mg Thin Films</li><li>Structure Characterization of W-Doped Vanadium Oxide Thin Films Prepared by Reactive Magnetron Sputtering</li><li>Study on Wurtzite-Sc_xAI_1-XN Thin Film: A Review</li><li>The Structure and Magnetic Properties of NiZn-Ferrite Films Deposited by Magnetron Sputtering at Room Temperature</li><li>ZnSe Quantum Dot Films Deposition from Modified Chemical Solution with Sodium Citrate</li><li>Chapter 16: Mechanical Behavior, Fracture and Fatigue</li><li>Bending Ratcheting Behavior of Zircaloy-4 Alloy at Room Temperature</li><li>Experimental Study on Fatigue Behavior of 35CrMo Steel after Torsional Prestrain</li><li>First-Principles Study of the Elastic Properties of Hexagonal Phase ScA_x (A=H, He)</li><li>Improved Extend Finite Element Method for SIF Calculation</li><li>Mechanical Behavior Research of a Novel Bridge Tower Structure Based on Model Test</li><li>Numerical Simulation of the Effect of Temperature on the Failure Strength of Rock</li><li>Reliability Study on Crack Growth Rate of ADB610 Steel</li><li>Chapter 16: Mechanical Behavior, Fracture and Fatigue</li><li>Statistical Analysis of Fatigue Crack Growth Rate of Q345E Steel</li><li>Super Long Life Fatigue Properties of Rail Steel U71Mn and U75V</li><li>Analysis on Creep Behaviors at High Temperature and Fracture Morphology of P92 Steels</li><li>Comparison of the Simulation and Experimental Fatigue Endurance Behaviors in T6-Treated Nanosized SiC Reinforced Al Alloy Composite</li><li>Experimental Study on Out-Plane Crack Extension in Rimmed Steel</li><li>Fracture Analysis on Drainage Pipe Socket of Boiler</li><li>High Cycle Fatigue Behavior of Eco7075-T73 Aluminum Alloy</li><li>Prediction of Fatigue Crack Growth of 2024-T351 by Grey <i>GM</i>(1,1) Model with Rolling Check</li><li>Research on the Effect of Pre-Stress on Bending Stiffness of the Ball Screw Based on ANSYS</li><li>Study on Kinetic Competitions of Crystal Growth</li><li>Tensile Characteristics of Polygonaceae Weed Roots in Slope Collapse Watershed</li><li>The Fracture Failure Analysis of Shaft for Light Hydrocarbon Pump</li><li>Applications of a New Element Model of Solid Bodies in Plasticity</li><li>Analysis of Fatigue Life and Influence Factors of Tubing with Initial Crack</li><li>Check on Structural Strength of Carbon Fiber Composite Field Kitchen Units</li><li>Chapter 17: Tooling Testing and Evaluation of Materials, Measurement</li><li>Investigation and Analysis on Transverse Crack Spacing Distribution in Continuously Reinforced Concrete Pavement in China</li><li>Numerical Solution of Constant-Q Fractional Order Integral Modeling</li><li>Research of Baseball's Best Batting Position Changes with the Selection of Material of Baseball</li><li>Development of Hard Rock Cutting Tool with Advanced Diamond Composites</li><li>Research on Properties of Materials Based on Extension Evaluation Method</li><li>Influence of Rear Earth Yb on the Specific Heat of Liquid Fe-Co-Yb Alloy</li><li>Lateral Non-Uniformity Charges Influence on Interface Trap Density (D_it) by Terman Method in the nMOS Fabrication</li><li>Ablation/Erosion Test Technology on C/C Composite Material Based on Plasma</li><li>Evaluation of CO₂ Absorbent/De-Absorbent by AAO/CaO Membrane</li><li>Application and Evaluation of New Cold Insulation Material in Cold Insulation Structure of Oil and Gas Processing Device</li><li>On-Road Gaseous Emission Characteristics of China IV CNG Bus in Shanghai</li><li>A New Experimental Technique for Dynamic Material Properties</li><li>On the Experimental Investigation of Rock Abrasiveness in Petroleum Engineering</li><li>Chapter 18: Structural Strength and Robustness</li><li>Analysis on Sealing and Deformation of Exhaust Valve Housing of Marine Diesel Engine</li><li>Analyzing Bearing Capacity Influence due to Location of Bearing Push-Extend Reamed of the Push-Extend Multi-under-Reamed Pile</li><li>Characteristics of Thin Metal Plate Being Strengthened by Laser Irradiation</li><li>Design of Variable Airship Mechanism Based on Finite Element Method</li><li>Finite Element Analysis of the Strength of Ladder Type Structure of the Deep-Water AUV</li><li>The Coupled Thermal and Mechanical Load Analysis in the 6S50MC-C Type Marine Diesel' Piston</li><li>The Finite Element Analysis of Ultimate Bearing Capacity of Initial Bending on the T-Axis Compression Component</li><li>Theoretical and Numerical Solution of Deflection of the Circular Ring under a Concentrated Force</li><li>Effect of Track Measuring Beam on the Bogie Frame Strength and Vibration Mode of Inspection Car</li><li>Enhancement Design on Composite Blade Structure of Small Wind Turbines Using Finite Element Analysis</li><li>FEM Based Statics Analysis of the Main Steel Structure of Bucket Wheel Stacker-Reclaimer</li><li>Finite Element Analysis for the Collapse Accident of One 110kV Transmission Tower</li><li>Mechanical Strength Analysis and Structure Improvement of Diaphragm Chamber Based on Finite Element Method</li><li>Numerical Simulation on Structural Strength of Cam Mechanism for Automobile Panel Die</li><li>Research on Screw Pump Rotor Eccentricitys Influence on Sucker Rod Partial Abrasion through Contact Analysis</li><li>The Application of AAR Load Spectrums in the Fatige Assessment for G70 Tank Carbody</li><li>The Mechanical Property Comparison of Two Kinds of Counterweight Booms of Stacker Reclaimer</li><li>Acoustic Emission Signals Characteristics of Q345R at Tensile Progress in the Normal and Low Temperatures</li><li>Chapter 19: Theory and Application of Friction and Wear</li><li>Experimental Study of Dynamic Characteristics of Dry Friction Damping of Turbine Blade Steel</li><li>Fever Analysis and Engineering Applications of the Heavy Machine Tool's Main Bearing</li><li>Key Aspects in Addressing Friction in Coaxial Hydraulic Sealing Systems</li><li>Progress on Facilities and Methodology to Evaluate Abradable Seal Coatings</li><li>Study on Tribological Performances for Textured Bearing of ICE</li><li>The Analysis of the Influencing Factors about Friction and Wear Characteristics of the Piston Ring in Stirling Engine</li><li>The Effect of Friction Coefficient on Fretting Fatigue Cracks</li><li>Study Film Temperature Including Cavitation Effect of Sliding Bearing by CFD Method</li><li>Research on the Reinforcement Mechanism of Stretched Rock Bolt and Analyzing of the Impact Parameters</li><li>Application of CBN Cutting Tools in Hard Turning and Tool Wear</li><li>Experimental Investigation on Ultrasonic Vibration Assisted Turning of Stainless Steels with PCD Tool</li><li>Study of the Effect of Tool Wear on Cutting Ti6Al4V Process</li><li>Chapter 20: Surface Engineering/Coatings</li><li>Arc-Spraying Composite Coatings on Mild Steel for Long-Term High-Temperature Oxidation Protection</li><li>Cracking Behavior of Two Kinds of Plasma Cladding Layers by Precursor Carbonization-Composition Process</li><li>Effect of Pt Content on TGO Growth in EB-PVD TBC Systems with Niptal Bondcoats</li><li>Evaluation Hard Layers in Steel AISI 8620</li><li>Formation of Hard Layers in Tool Steels</li><li>In-Flight Particle Behavior Measured by DPV-2000 System under Low Pressure Condition</li><li>Process Characteristics and Experiment on Micro Arc Oxidation of Light Metals</li><li>Study on Water-Based Paint Stripper for Tinplate</li><li>Surface Activity Research of Cationic Gemini Surfactants</li><li>Synthesis and Properties of Hydroxyapatite-Containing Porous Titania Coating on Titanium by Ultrasonic Shot Peening and Micro-Arc Oxidation</li><li>The Irradiation Effects of Metal Gold Surface by Intense Pulsed Ion Beam</li><li>The Study of Aromatization Performance of HZSM-5 Catalyst Deposited Silicon on the Surface</li><li>Analysis of Selective Absorber Coatings on Thermal Performance of the Solar Flat-Plate Collector</li><li>Characteristics Evaluation of Coating Film by Thermal Spray in Seawater Solution</li><li>Comparison Research on Mechanical Properties of Stainless Steel after Laser Peened and Ultrasonically Peened</li><li>Effect of Electro-Spark Deposition Process Parameter on WC Coating Thickness of H13 Steel Surface</li><li>Effects of Carrier Gases on the Microstructures and Properties of Ti Coating Layers Manufactured through the Cold Spraying</li><li>Influences of Surface Nanocrystallization Induced by High-Energy Spot Peening on Microstructure and Properties of Magnesium Alloy</li><li>Investigations of Wetting Properties of Stainless Steel by Molten Multi-Component Oxides</li><li>Polymer Mixtures as Colon Targeted Drug Delivery Systems</li><li>Structrure of Al₂O₃ Ceramic Coating on Super Alloy Prepared by Cathodic Plasma Electrolytic Oxidation</li><li>Study on the Surface Plasma Hardening Treatment and Anti-Penetration Mechanism of Armor Steel</li><li>The Study on Preparation and Apply of Ni-Co-P Alloy Coating</li><li>Electroless Nickel-Phosphorus Plating on TiB₂ Powder</li><li>Phase Evolution and Mechanical Properties of Cr-C Coatings Deposited by Reactive Unbalanced Magnetron Sputtering Process</li><li>First-Principles Study on Elastic Properties and Electronic Structure of Ti_1-xAl_xN</li><li>Preparation and Cutting Performance of YT15 Cemented Carbide Tools with Ti (C, N)/Al₂O₃ Composite Coating</li><li>Effect of Abrasives on the Lapping Performance of 6H-SiC Single Crystal Wafer</li><li>Fabrication and Characterization of Magnetic Polymer ICF Target by the Electroless Plating</li><li>Chapter 21: Materials Forming and Manufacturing Processes</li><li>A Study of the Microstructure and Mechanical Properties of C-Si-Mn Hot Rolled Dual Phase Steel</li><li>Analysis and Research on the Failure Mode of Large Automobile Stamping and Countermeasure</li><li>Analysis on Structure of Radial-Axial Ring Rolling Experimental Equipment by FEM</li><li>Continuous Cooling Transformation Behavior of X70 Pipeline Steel</li><li>Design and Analysis of the Low-Speed Hydraulic Control System of 3.15MN Forging Press</li><li>Design of a New Type Flexible Stretch-Forming Machine</li><li>Effect of Lubrications on Quick Plastic Forming Behavior of AZ31 Magnesium Alloy Sheet</li><li>Effects of Strip Thickness Difference on Deviation in Aluminum Hot Rolling</li><li>Effects of Surface Roughness Microtopography on Formability in Cold Rolled Steel Sheet</li><li>Forecast of Shrinkage Porosity of Aluminum Wheel Liquid Die Forging in Solidification Process and Process Optimization</li><li>Hot Stamping and Blank Designing for a Vehicle Bumper Using Ultra High Strength Steel (UHSS)</li><li>Investigation on over-Spray Powder of Spray Formed Al-22Si-5Fe-4Mn-3Cu-1Mg Alloy</li><li>Study on Design Parameters of Strip Wound Prestressed Die Based on Fatigue Theory</li><li>Study on Texture of AZ80 Magnesium Alloy Induced by Multi-Axial Forging</li><li>Study on the Flow Stress of the High-Mn Austenitic Steel during Hot Deformation</li><li>Study on the Parameters of Piercing Die with Finite Element Method</li><li>The Effect of Pre-Strain and Strain Aging on Properties of X100 Line Pipe</li><li>A Review of Liquid Forging Process</li><li>Development of Intelligent Control of Optimum Parameters in Deep Drawing of Sheet Metal Using Genetic Algorithm and Finite Element Methods</li><li>Development of Secondary Controlled Hydraulic Pressure Forming of Sheet Metal for Energy Saving and Re-Utilization:</li><li>Effect of Initial Position of the Counterpunch on T-Shape Hydroforming</li><li>Effects of Mandrel Structure on Ring Rolling Process for Large-Scale T-Sectioned Ring with Numerical Simulation</li><li>Effects of Process Parameters on Wall Thinning Ratio during One Pass Hot Power Backward Spinning for 7075 Cast Aluminium Alloy Tube</li><li>FEM-Based Analysis on the Process of Tube Stamping</li><li>Finite Element Analysis for 40 MN Die Forging Press</li><li>Finite Element Analysis of Main Stand of ?140 Pipe Rolling Mill and Split Casting</li><li>Flow Stress Models Analysis for Metal Powder Forming Simulation</li><li>Investigation of Effective Parameters of Spring-Back in CK67 Steel Sheet Metal Using Finite Element Method</li><li>Parameter Optimization of the Injection Molding Process for a LED Lighting Lens Using Soft Computing</li><li>Plastic Instability Criterion of Radial Ring Rolling</li><li>Pulse Current Auxiliary Tensile and Bulging of Light Metal Alloy</li><li>Rolling Force Prediction System of Cold Rolling Process Based on BP Neural Network</li><li>Use of Acoustic Energy in Sand Casting of Aluminium Alloys</li><li>Study on Conventional Domed Bursting Disc Material and Burst Pressure Test</li><li>Numerical Simulation of Stress-Strain of AZ31 Mg Alloy Profile during Warm Tension-Rotation Bending Process</li><li>Small Module Involute Spline Processing with Position Requirements</li><li>Research on Key Processing Technology of Nuclear Power Tapered Cylinder Forging</li><li>Chapter 22: Materials Machining</li><li>A Theoretical Model of Grinding Force and its Simulation</li><li>An Experimental Study of Cutting Forces in Ball-End Milling of AISI H13</li><li>Analysis on Milling Stability Performed under the Conditions of Positive and Negative Process Stiffness</li><li>Chip Formation Simulation in FE Modeling for Machining FRP Composite</li><li>Cutting Force Modeling and Prediction in End Milling Including Flank Wear</li><li>Effect of Microstructure on Cutting Force and Chip Formation during Machining of Ti-6Al-4V Alloy</li><li>Experiment on Surface Roughness and Acoustic Emission Signal in Infeed Period of Cylindrical Plunge Grinding</li><li>Experimental Study on Hardness of Titanium Alloy Ti-1023 by Milling</li><li>Grinding Parameters Optimization of Stainless Steel Surface Based on Grey Relational Analysis</li><li>Machining Simulation of Equal Base Circle Bevel Gear Using Disc Cutter</li><li>Math Modules Establish for BUR Edge Chamfer and its Grinding Process</li><li>Modeling and Analysis of Machining Force in Elliptical Vibration Cutting</li><li>Modeling of Force on Axial Power Ultrasonic Honing</li><li>Research of Bearing Crown Roller-Raceway by Non-Uniform Interelectrode Gap Electrochemical Mechanical Machining</li><li>Research on the Relation between Cutting Parameters and Axial Cutting Force in Helical Milling Process</li><li>Research on the Rock Breaking by Double Disc Cutter Test-Bed</li><li>Simulation on Material Removal during Reciprocating Traveling WEDM of Insulating Ceramics</li><li>Static and Modal Characteristic Analysis of a Horizontal Machining Center</li><li>Study on Machinability of Pre-Hardened Plastic Mould Steel</li><li>The Analysis of Static and Dynamic Characteristic in Grinding Head of Roller Machine</li><li>The Influence of Variable-Speed Waveforms on Vibration Suppression in Time-Varying Speed Cutting</li><li>Drilling Simulation of Carbon Fiber Reinforced Plastic Composites Based on Finite Element Method</li><li>Experimental Investigation of Effect of Gear Milling Parameters of Al-B₄C Composite Gears on Surface Roughness</li><li>Investigation on Delamination Factor in Drilling Medium Density Fiberboards with Variable Feed Pressure Using Multi-Spindle Drill</li><li>Parameter Recognition and Optimization of Residual Stress Prediction Model Based on Genetic Algorithm</li><li>Prediction of Surface Roughness on CNC Turning Based on Monitoring of Cutting Force and Cutting Temperature</li><li>Study on the Ultrasonic Characteristics in the Contact Interface under Ultrasonic Cutting</li><li>The Effect of Tool Geometrical Parameters on Cutting Temperature Based on Deform-3D</li><li>The Nano-Cutting Mechanism Research of Polysilicon Based on Molecular Dynamics</li><li>Chapter 23: Welding & Joining</li><li>An Investigation on Vacuum Brazing of Dissimilar Nonferrous Metals of Cu and Al</li><li>Effect of Magnetic Field Current on Microstructure and Properties of AZ91 Magnesium Alloy Welded Joint</li><li>Effects of Welding Heat Input on 22MnB5 Steel with Hot-Dipping Al Coating</li><li>Influence of Reflow Soldering Process Parameters on the Lead-Free Reflow Profile</li><li>Life-Cycle Energy Analysis as a Method for Welding Joint Design</li><li>Modeling and Simulation on Temperature Control System for Hot Pressure Welding</li><li>Weld Seam Deviation Detection Base on Laser Welding Pool's Centroid</li><li>Analysis of Organizations of Brazed Seam 5052 Al Alloy Contact Reactive Brazing</li><li>Bayesian Probabilistic Approach to FE Model Updating of Vehicle Typical Spot Weld Structure</li><li>Experimental Study of Effect of Adhesives on Strength of Composites Adhesive Joints</li><li>Fracture Behavior of High-Frequency Welded Joints of GH4169 Alloy</li><li>Mechanism Research on Residual Stress's Elimination of Aluminum Alloy Welding by Ultrasonic</li><li>Modeling and Analysis of Underwater Wet Weld Process Based on Regression Method</li><li>Numerical Simulation Research of Tailor-Welded Blanks</li><li>Orthogonal Experiment of Resistance Microwelding of Insulated Copper Wire and Phosphor Bronze Sheet</li><li>Progressive Failure Analysis of Adhesively Bonded Laminates Joints with Spew Fillets</li><li>Properties Effect of 16MnR Steel Weld Joint by Different Welding Methods</li><li>Research on Welded Pipe and Tube Pass Design Virtual Methods</li><li>The Friction Welding Characteristic Analysis of the Al 7075-T6 According to the Spindle Speed and Upset Pressure</li><li>The Temperature and Residual Stress Distributions of Butt Weld Pass on Nickel Alloy 690 Plate</li><li>The Welding Track Planning and Motion Control of T-Type Tube Autowelding Machine</li><li>Three-Dimensional Numerical Simulation of Temperature Field and Force Field of T-Type Turbe during Welding</li><li>Vacuum Brazing of Copper Tubes Using Ag-Cu Filler</li><li>Influence of Fluctuation Frequency on Stress Corrosion Cracking of X70 Pipeline Steel Welding Joint</li><li>The Characteristics of Weld Metal Zone Welded with Various Filler Metals</li><li>Chapter 23: Welding & Joining</li><li>A Method Based on the Morphology of Lead-Free Solder Powder Adhesive Particle Segmentation</li><li>Research for Viscoplastic Behaviors of SAC405 Pb-Free Solder</li><li>Chapter 24: CAD/CAE/CAM</li><li>A New Method for Minimizing Cogging Torque in Permanent Magnet Machines Using Genetic Algorithm</li><li>Ab Initio Molecular Dynamics Simulations of Cu under Vacuum and 473~1573K</li><li>Application of Interactive Orthogonal Design on the Aerodynamic Drag Optimization of Hatchback Car</li><li>Application of Reverse Engineering for Redesigning and Manufacturing of a Printer Spare Part</li><li>Computerized Numerical Control (CNC) Machining Engraving Processing of Surface Based on Master CAM</li><li>Design and Analysis of the Spiral Staircase in Large Steel Structure</li><li>Design of Upswept Aft-Body of Civil Transport Based on CFD</li><li>Discrete Element Method Simulation of Mesomechanics of Railway Ballast during Tamping Process</li><li>Experimental and Numerical Study of Railway Ballast Compactness during Tamping Process</li><li>Finite Element Analysis of Light Cargo Van Frame</li><li>Finite Element Analysis of Sealing Structures for SF6 Gas Insulated Switchgear</li><li>Hand Sketching in 3D Computer Animation Model Rendering and Editing</li><li>Mohr Strength Theory in Simulation Stress Analysis</li><li>Numerical Simulation and Optimization of Steel Pipe Cathodic Protection under the Condition of 3.5% Brine</li><li>Point-Based CAD/CAM Geometric Model Design</li><li>Simulation Calculation of the Braking Performance of Portal Cranes Based on ADAMS</li><li>Surface Extension in Smoothing of Class a Surfaces for Auto-Body</li><li>The Optimal Design of Injection Mold Gate Based on CAE</li><li>A New Method to Handle Temporal Planning in Flexible Graphplan Framework</li><li>A Universal Feature Definition Frame for 3-D CAD Model Conversion</li><li>Combination Regression and Neural Network for Short Term Load Forecasting</li><li>Four - Wheel Steering Vehicle Modeling and Simulation Based on ADAMS</li><li>Multi-Dimensional Analysis of NO_x and Soot Formation in a Diesel-Fueled Hydraulic Free Piston Engine</li><li>New Downhole Intelligent Throttling System Based on the Poppet Valve</li><li>Numerical Analysis of Flat Circular Parachutes Inflation Process</li><li>Point Cloud Data Preprocessing Based on the Geomagic</li><li>Research on Three-Dimensional Topology Optimization for the Bed of NC Gear Shaper</li><li>The Development and Simulation of the 3D FEM Software ---- Alpha System</li><li>The Reliability Evaluation of Threaded Connections in Challenging Drilling by Three-Dimensional Finite Element Analysis</li><li>The Research of Deformation Compensation of the Unloading Mechanism of the Beam for XK-2535 Large-Scale CNC Gantry Milling Machine and Engineering Application</li><li>Development of CAD Module for Gating System of Iron Castings Based on Sinovation</li><li>Construction Method of Tool Path Based on Arc-Cell</li><li>A Parting Surface Design of Multi-Cavity Mold Based on Pro/E Surface Technique</li><li>Chapter 25: Modeling, Analysis and Simulation of Manufacturing Processes</li><li>Air Flow Field and Fiber Motion in a Swirl Die Melt-Blowing Process</li><li>An Identification Method for Joint Parameters Based on Finite Element</li><li>Analysis on micro-/poly-Crystalline SiGe Alloy Solar Cells</li><li>Dynamics Influences Discussion of Robot MiniQuad-II for Construction Member Structure Change Based on ADAMS</li><li>Effects of Structural Parameters on Nanofiber from a Multihole Electrospinning Setup</li><li>Numerical Simulation Analysis on Repairing Hole of UAV Wing</li><li>Optimal Production LineLayout Model Based on Integer Programming</li><li>Research and Application of the Structural Optimization Design Technique for the Large and Efficient Band Sawing Machine</li><li>Research of Modeling and Simulation of Aviation Ignition Equipment</li><li>Simulation of the Nozzle Electro-Hydraulic Servo Valve with ITI-SimulationX</li><li>Simulation on the Hydraulic System of a Constant Tension Waves Compensation Winch</li><li>Study on the Formability Rules with Precise Die Face for the Inner Clutch Shell of Automobile</li><li>Study on the Pressure Distribution on Solid-Plug Conveying of Centrifugal Extruder</li><li>The FEA and Optimal Design of the Loader Based on Virtual Prototyping</li><li>The Micro-Variation Principle of Mating Constraints and its Application to Simulation of Cumulative Deviations for Mechanical Assemblies</li><li>The Spent Fuel Pool Analysis of Chinshan Nuclear Power Plant by Using TRACE/FRAPCON-3.4</li><li>The Study of Mechanism Analysis and Dynamical Simulation Based on Ultrasound Enhanced Supercritical and Subcritical CO₂ Dissolution</li><li>Design and Simulation of Rinsing Equipment of Cable Rolling Wire Rope</li><li>Design of Compressed Air Dehumidifying Equipment for Wire Rope and Simulation of Air Knife Flow Field</li><li>Effect of High Frequency Electromagnetic Fields on Liquid Steel in Soft-Contact Mold</li><li>Effect of Insulators on the Power Consumption and the Oxygen Content of Si Ingots in Czochralski Growth</li><li>Feasibility Analysis and Simulation of Minitype Combination Balance</li><li>FEM Based Numerical Simulation of Delta Parallel Mechanism</li><li>Finite Element Analysis and Experimental Study of an Electromagnetic Shell Part with Flow Control Forming</li><li>Finite Element Analysis of Frame on ZXZ90 Towing Machine for Cable</li><li>Optimization Design for the Longitudinal Structure of LED Light Guide Plate Using Soft Computing</li><li>Partial Least Squares Regression Analysis of Thermal Distortion Behavior for Linear Motor Drive Feed System</li><li>Single-Machine Scheduling to Minimize Makespan with Deterioration Jobs and Multi-Maintenance Activities</li><li>Solute Distribution Ahead of Interface during Heteroepitaxial Growth</li><li>The Effect of Damping Block Design on Stability of Ploymer Coextrusion Process</li><li>The Modal Analysis for the Third Type of Internal Gear Motor</li><li>The Simulation Study of the Influence of Surface Error on Optical Properties for Optical Part</li><li>Theoretical Analysis on Manufacturing Hypoid Left-Hand Gears by Generating-Line Method</li><li>Co-Simulation of Composite ABS Control for In-Wheel Motor Drive Electric Vehicle Based on Threshold Control Algorithm</li><li>Design and Analysis of a CFRP Drive Shaft</li><li>Research on Vibration and Sound Radiation from Submarine Functionally Graded Material Nonpressure Cylindrical Shell</li><li>Numerical Investigation for Fracture Saturation in Multilayer Sedimentary Rock in Unsymmetrical Case</li><li>Numerical Simulation for Rock Fracturing Process under Action of Disc Cutter</li><li>The Preventing Coal and Gas Outburst Technology of Middle Distance and Low Permeability and Upper Protective Layer</li><li>The Roof Broken Mechanism of Fully Mechanized Coal Face with Super Thick and Loose Layer</li><li>Research and Prediction of Yellow Soil Moisture Content in Guizhou Province Based on ARIMA Model</li><li>Energy Analysis and Optimization of Methyl Chlorosilane Separation</li><li>The Optimization of CO₂ Huff and Puff Well Location in Ultra-Low Permeability Reservoir</li><li>Prediction of the Flow, Reaction and Heat Transfer for Glass Furnace Firing Petroleum Coke</li><li>A Coke Quality Prediction Model Based on Support Vector Machine</li><li>Research on Materials Corrosion Failure Model of Liquefied Natural Gas (LNG) Cylinder for Vehicle</li><li>Simulation Studies on the Influence of Impact Velocity on the PELE Penetrated and Broken Reinforced Concrete</li><li>The Failure Finite Element Analysis of Pump Collision with Valve in the Oil Well Pump</li><li>The Main Structure Design and Motion Simulation of Spreaders Based on Virtual Prototype Technology</li><li>The Modal Analysis of the Main Steel Structure of Bucket Wheel Stacker Reclaimer</li><li>Distribution of Stray Current in the Buried Metallic Pipeline Based on Inducted Electric Field</li><li>Design of Terraced Spinneret Based on Simulation of Electric Field Distribution in Electrospinning</li><li>Micro Injection Molding and Strength Check of Polymer Micro-Needle</li><li>Simulation Analysis on Height Change of 6010 Aluminum Plate Limit Drawing under Different Process Parameters</li><li>Optimization and Improvement of Pile and Pull Coefficient Mathematical Model for Trapezoidal Stainless Steel Sieve Bar</li><li>Virtual Processing of Fish Fillets</li><li>Integrated Kinematics Optimization and Strength Analysis for a Wheel Loader Boom Mechanism</li><li>Numerical Simulation on Thermal Field in the Fluidized Bed with Internal Heating Plates</li><li>Modeling and Analysis of the Scavenging System for a Two-Stroke Cycle Hydraulic Free Piston Engine</li><li>The Effect and Analysis of the Crankshaft Journal Fillet Rolling for Runout</li><li>The Study of EDG GH3536 Surface Roughness Base on the Artificial Neural Network Modeling</li><li>The Damage Evolution of the Flange Repaired Reinforcement Laminates</li><li>The Research on Dynamic Simulation of Rods and Cones Type Docking Mechanism</li><li>Reservoir Modeling and Numerical Simulation Controlled by Flow Units</li><li>A New Operational Pattern Optimization Method and Its Application in Nonferrous Metallurgy</li><li>Spectral Element Approximation for the Eigenvalue Problem of Hydrogen Atoms Electronic Structure</li><li>Chapter 26: High-Speed/Precision Machining, Inspection and Control Technologies</li><li>A Template-Matching-Based Fast Algorithm for PCB Components Detection</li><li>Abrasive-Free Polishing of Hard Disk Substrate with H₂O₂-K₂S₂O₈-NaHSO₃ Slurry</li><li>Aspherical Surface Contact Detection Error Analysis</li><li>Deep-Hole Precision Honing of Difficult-to-Cut Materials</li><li>Effect of K₂S₂O₈ on Material Removal Rate in Abrasive-Free Polishing of Hard Disk Substrate</li><li>Electrochemical Deburring of Miniature Holes</li><li>Numerical Analysis of the Ultrasonic Honing Chatter Based on the Stribeck Model</li><li>Quantitative Analysis of Lateral Setting Error in Two-Point Method</li><li>Simulation Analysis of Thermodynamics on the Belt Spindle of the Machining Center</li><li>The Effect of Geometric Error on Machining Accuracy for Machining Center</li><li>Virtual Gear Measurement Center and its Application</li><li>A Novel Method for Kinematic Optimization of Camshaft Non-Circular Grinding</li><li>Comprehensive Test of Electric Spindle Based on Thermal Stress</li><li>Estimation of the Time Constant of Precision Plunge Grinding in Dwell Period Based on Acoustic Emission Measurement</li><li>Experimental Investigation on Thermal Characteristics of Hollow Ball Screw in Different Working Conditions</li><li>Inflection Points Processing of Continuous Tiny Line Segments for CNC System High-Speed Machining</li><li>Research on the Influence of Harmonics on High-Speed Permanent Magnet Motor</li><li>Study on Spindle Dynamic Errors of Domestic NC Machine Tools</li><li>Study on Ultrasonic Cavitaion Field of Power Ultrasonic Honing</li><li>Research and Application of Dynamic Secondary Cooling Control Method for Slab Caster of CISDI</li><li>The Improvement of Laminar Cooling System for Hot Rolled Strip Base on Rolling Process</li><li>Experimental Research on Acoustic Parameters and Saturation of Gas Hydrate-Bearing Sediments</li><li>Study on Flaw Detection in Welding Zone of Diamond Saw Blade</li><li>Study on Reaming High-Precision Thin Hole in Hardened Steel by Ultrasonic Vibration Reamer</li><li>Development of an Automatic Inspection System for Manufacture of Plastic-Container Pump Assemblies</li><li>Finite Element Analysis of Contact between Laying Head Pipe and High-Speed Wire Rod</li><li>Research on the Normal Error of Large Aspheric Mirror Employed in Bonnet Polishing</li><li>Chapter 27: Laser Processing Technology</li><li>Dry Sliding Wear Behavior of Laser Clad WC/NiCrBSi Metal Matrix Composite Coatings</li><li>Numerical Simulation of Feeding Powder Laser Cladding Temperature Field Based on ANSYS</li><li>Optimizing BP Networks by Means of Genetic Algorithms in Quality of Laser Milling</li><li>The Influence of Mixing Enthalpy on the Geometric Properties of Laser Solid Formed Ti-6Al-4V</li><li>3D Laser Remanufacturing of Damaged Parts</li><li>Optimization on Selective Fiber Laser Sintering of Tri-Metallic Powders via Design of Experiments Method</li><li>Current Progresses of Laser Assisted Machining of Aerospace Materials for Enhancing Tool Life</li><li>Chapter 28: Products Design, Manufacture and Industry</li><li>Analysis of New Features of Beer Packaging Design</li><li>Innovative Vacuum Cleaner Design Using TRIZ Method</li><li>Research & Design of the Multifunctional Landscape Hedge Trimmer</li><li>Assessment System of Remaining Life for Bridge Crane Based on the Internet of Things</li><li>Characteristics of Marks on Concave Key Duplicated by Machine</li><li>Conceptual Approach for Design, Fabrication and Testing of Indoor Remotely Controlled Airship</li><li>Deficiency Analysis of Different Ship Types Based on Taiwan PSC Data</li><li>Design and Experiment of <i>Sinonovacula constricta </i>Purification Bacteria System</li><li>Improvement of Packaging Structure and Materials about Daily Chemical Products Plastic Hose Packaging</li><li>Improvement of Structure and Material about Plastic Emulsion Pump for Daily Cosmetic Products Packaging</li><li>Optimization of a 17m Catamaran Based on the Resistance Performance</li><li>Research on High-Grade Anti-Counterfeiting Scratchcard Invoice Printing Technology and Craft</li><li>Research on the Influence Factors of the Wave Collar Style</li><li>SCA Based Exploratory Evaluation of Weapon Equipment Operational Effectiveness</li><li>Slip-Resistance Assessment on Different Types of Emery Anti-Slip Strip</li><li>Study on a New Type Massage Device</li><li>The Development of Santana 2000 Lighting Test Rig</li><li>The Research on the Application of Kansei Engineering in the Product Design</li><li>The Security and Function Improvement of Suitcase Based on Human Factors Engineering</li><li>Variation Analysis for a Manufacturing Stage Based on a Balanced One-Way ANOVA Model</li><li>Weave and Process Design of Monolayer Two-Sided Velvet Fabric</li><li>Research on Material Selection and Sizes Optimization of Casing Material for Fracturing Wells under Existence of Brine Corrosion</li><li>The Application of Parstat 2273 Electrochemical Workstation in Corrosion Experiment</li><li>Research on Improving the Pass Yield of the Manufacturing of 0645 Type of Sharpener</li><li>Analysis of Current Situation of Digital Sculpture Development</li><li>Analysis of Snow-Ice Characteristics and Clearing Performance on Urban Road</li><li>Chapter 29: Mineral Materials, Mining and Mineral Process Engineering</li><li>Experimental Study on Coal Entry with Water Trickling and Burst Cracked Roof Supported by Anchor Net</li><li>Gaseous Fluorides Formation Mechanism in the Roasting Process of the Fluorite-Bearing Iron Concentrate</li><li>Metallogenic Geological Characteristics and Metallogenic Model of Xiachen-Wangchangmu Fluorite Mine in Tiantai Basin, Zhejiang Province, China</li><li>Mine Laneway Modeling and Realization Based on the Matlab</li><li>Separate the Anshan-Type Low-Grade Hematite Ore With Process of Low-High Intensity Magnetic Separation and Reverse Flotation Method</li><li>Study on Comprehensive Utilizations of Certain Complex Paragenic Tin Polymetallic Ore</li><li>Mechanochemical Activation and Characterization of Low-Medium Grade Phosphorite Ore</li><li>Various Morphology of Hierarchical Pore-Structured Compound: MCM-41/Diatomite and its Adsorption Behavior for Methylene Blue</li><li>Preliminary Study on Leaching Mechanism of Manganese Using Ternary Compound Reductant</li><li>Geostatistics Method for Identification of Minor Structure Seismic Attribute</li><li>Late Accumulation of Kunbei Area in Qaidam Basin</li><li>Study on Leaching Manganese from Low-Grade Manganese Ores Using Different Reductants</li><li>Experimental Study on Gas Hydrates Dissociation in Sands by Depressurization</li><li>Leaching of Low-Grade Manganese Ores by Using Two Compound Reductants</li><li>The Study of the Factors which Influences the Dissolution Rate of the Halite</li><li>Paste Thickening of Iron Tailings with Vibrating Lamella Thickener</li><li>Corrosion Effect of Acid Rain on the Technical Properties of Mineral Aggregates</li><li>The Analysis and Correction of Sampling Bias of Discontinuity Orientation Caused by Linear Sampling Technique</li></ul>