Advanced Materials and Process Technology

<ul><li>Preface and Conference Organization</li><li>Chapter 1: Composites</li><li>Aluminium Titanate-Aluminia Composites Synthesized by Heterogeneous Precipitation Method</li><li>Electrochemical Behavior of Copper in the (NaCl-KCl-CuCl₂) Molten Salt</li><li>Corrosion Resistance of E-Glass Fiber in Simulated Oilfield Environment</li><li>A Study of Spectral Changes of Reactive Dyes</li><li>Piezoelectric Properties of 1-3 Piezoelectric Tubular Composites</li><li>Effects of B₂O₃ Flux on the Synthesis and Microstructure of Aluminum Metal Matrix Composites</li><li>The Melting Temperature of CaO-(2CaO*SiO₂)-B₂O₃-SiO₂-(Al₂O₃) Slag System</li><li>Calculation Model of Mass Action Concentrations for CaO-Al₂O₃-SiO₂ Slag System</li><li>Study on Sintering Properties and Crystallization of Fused Quartz Ceramic Materials Containing BN-B₄C</li><li>Effect of Electromagnetic Stirring on Morphology Evolution of Mg₂Si in Hypereutectic Al-Si Alloy Composite</li><li>Numerical Simulations of SFRC Projectile Penetrating into Limestone Using FEM/SPH Coupling Method</li><li>Research on the Optimization of Porosity in Resin Mineral Composite</li><li>Preparation and Properties of Closed Cell Aluminum-Fly Ash Floating Beads Composite Foam</li><li>Application of Advanced Carbon Fiber Composite Material in Sport Equipments</li><li>Tensile Behavior of 2.5D C/SiCN Composites</li><li>Microstructure Evolution of <i>In Situ</i> Synthesized VC Reinforced Iron Matrix Composites</li><li>Study on Antistatic PET/PTT-CNTs Composites</li><li>Modeling of the Tensile Deformation Behavior of SiCp/Fe Composites</li><li>Low-Temperature Preparation of Porous Cordierite-Mullite Ceramics Using Rice Husk as Silica Source and Pore-Forming Agent</li><li>Reliability Based Buckling Analysis of Composite Panels with Tophat Stiffened Topology</li><li>Doping of Diamond Crystals with a Dopant of P₃N₅</li><li>The Effects of the Aging Temperature on the Microstructure and Corrosion Resistance of the Nickel-Phosphorus Composite Al₂O₃ Deposit</li><li>Influence of Phosphorous on the Tribological Properties of PM Iron-Based Sintered Composites</li><li>Effect of Pouring Temperature on the Microstructure of HCCI/Steel Composite Hammer</li><li>Microstructure of <i>In Situ</i> Particles/7055Al Matrix Composites with Deep Cryogenic Treatment</li><li>Effect of CaO/SiO₂ Ratio and TiO₂ on Glass-Ceramics Made from Steel Slag and Fly Ash</li><li>Experimental Studies of Glass Reinforced Aluminum (GLARE) Bolted Joint</li><li>Conductive Rubber Nanocomposites as Tensile and Pressure Sensors</li><li>Effect of Coupling Agent Treatment on the Properties of Silicon Carbide Filled LLDPE Composites</li><li>High Strain-Rate Compressive Response of Epoxy Composites</li><li>Preparation of Nickel/Poly(m-Toluidine) Composites and its Magnetic Properties</li><li>Tribological Characteristics of Si₃N₄-HBN Ceramic Materials for Dry Application</li><li>Evaluation of Drag Reduction Agent Used in Oil Pipeline Transportation</li><li>Study of Wettability of Vinyl Resin on Carbon Fiber</li><li>Concrete Crack Control Technology in Chongqing Inch Container Terminal Box Letter of Application in Engineering</li><li>Study on Physical and Dynamic Properties of BR Based Composites Filled with Different Particle Size of Magnesia</li><li>Thermodynamic Parameters Analysis of MgS Superfine Inclusion in Grain Boundary</li><li>Optimization Design for Laminated Composite Structure Based on Kriging Model</li><li>Study on the Performance of Pearl Fiber Composite Yarn</li><li>Steel-Concrete Bond Deterioration under Repeated Loading for Different Confinement Levels</li><li>Test and Analysis on Anti-Penetration Performance of Ceramic Multi-Layer Composite Medium</li><li>Chapter 2: Micro/Nano Materials and Equipments</li><li>Study on Dynamics Performance of Nano-Concrete</li><li>Effect of Doping Transition Metal Ions on Photocatalysis of TiO₂ Nanowires</li><li>Mechanism of Nanofibre Fabrication by Meltblowing</li><li>Synthesis and Luminescent Properties of Micro - Nanometer Ca_0.69Sr_0.23(P_xMo_y)O₄:0.05Eu³⁺ by Co Precipitation - Melted-Salt Method</li><li>Experimental Study on Ultrasonic Grinding of Nano-ZrO₂ Ceramics by Single-Grit</li><li>Tribological Characteristics of Nano Structured Nickel Coatings for Renivating of Extruding Shafts</li><li>In-Plane Thermoelectric Generator of Carbon Nanotube Membrane Driven by Thermal Gas Flow</li><li>Solid State Chemical Reaction Synthesis and Characterization of Nanocrystalline Cerium Oxalate under Ultrasonication Spectra</li><li>Application of Tetragonal Nano-Zirconia in Ceramic Teeth</li><li>Effect of Starting Powders on Microstructure and Properties of Silicon Nitride Nanoceramics</li><li>Production of Nano NiO Particle with Chemical Precipitation Method and their Characteristics</li><li>Study of Modification Mechanism of Ultrafine Silica Modified by PAMAM</li><li>Size-Controlled Synthesis of Magnetite Nanoparticles from Iron Acetate by Thermal Decomposition</li><li>Preparation and Characterization Nano-Cellulose and its Surface Modification by Silane Coupling Agent</li><li>Polyethersulfone Composites Reinforced by Silica Nanoparticles</li><li>Preparation and Application Study of Nano-Sized Organic Bentonite Used for Composite Flame Retardant</li><li>Improvement Effect of Functionalized Cnts on Mechanical and Thermal Properties of Epoxy Matrix</li><li>Chapter 3: Metal Alloy Materials</li><li>Effects of Deformation Ratio above Recrystallizaton Temperature on Microstructure and Properties of 2A12 Aluminum Alloy</li><li>Effects of Pre-Ageing on Thermomechanical Treatment Process of 2A12 Aluminum Alloy</li><li>Influence of Stiffener Structural Parameters on Compress Buckling Performance of Alloy Aluminum Stiffened Panel</li><li>Age-Hardening Characteristics of Cu-Ni-Si Alloy after Cold Deformation</li><li>The Application of Abaqus Software in the Online-Quenching Process of 6005 Aluminum Alloy Profile</li><li>Study on Structure Stability of Ti-Al Multilaminate Material at High Temperature</li><li>Study on Tribological Performances of Friction Plate on MW Wind Power</li><li>Properties of Low-Carbon Al₂O₃-C Refractories with Different Critical Particle Size</li><li>Research on the Tribology Performance of Copper-Bismuth Bearing Material</li><li>Effect of Electromagnetic Stirring Process Parameters on Semi-Solid Fluid Field of Aluminum Alloy</li><li>Coupled Simulation on Temperature Field and Microstructure Formation Process of K4169 Superalloy Blade in Investment Casting</li><li>Tensile Creep Behavior of Two NiAl-Based Alloys</li><li>Effect of Divorced Eutectic on the Liquation Crack Susceptibility of Al-Cu Alloy</li><li>Reaction Hot-Pressed Sintering of Grain-Refined TiB₂-TiC Composites by AlN-SiC Solid Solution</li><li>The Heterogeneity of Composition and Microstructure in Cast Large Sized 3104 Alloy Slab</li><li>Effect of Initial Texture on the Development of Microstructure and Mechanical Properties in AZ31 Magnesium Alloy after Rolling at 300 degreesC</li><li>Influence of Jacket and Filling Materials Characteristics on PELE Effects</li><li>Influences of Ultrasonic Wave on Polycrystalline Alumina Fibers Synthesized</li><li>Rheological Behavior of Semisolid AlSi6Mg2 Alloy at Transient State</li><li>Workability of ZK60A Alloy Depending on Microstructure</li><li>Research on Synthesizing Process under Ultrasound Coupling and Refining Performance of Al-Ti-C Grain Refiner</li><li>Effect of Alloying Elements on Microstructure, Texture Development, and Mechanical Properties of Magnesium Alloys</li><li>Block Shear Strength of Single Shear Four-Bolted Connections with Aluminum Alloys - Experiment and Design Strength Comparison</li><li>Analysis on Fatigue Crack Propagation and Fractography of A7075 Aluminum Alloy</li><li>Research on Cold-Rolled Bimetal of High-Tin Aluminum Alloy and Steel</li><li>Effects of Cu and Sb on Corrosion Resistance of ZnAl27 Alloy</li><li>Chapter 4: Steel</li><li>Very Long Life Fatigue Behavior of Q345 Bridge Steel</li><li>The Study on the Precipitation Behavior of the Second Phase Particles for Fine Grain and High Strength IF Steel</li><li>Microstructure Evolution of Dynamic Recrystallization of 42CrMo Steel during Multi-Stage Forging by FEM</li><li>The Corrosion Behavior of a Low Carbon Bainite Steel in Simulated Atmosphere Environment Containing Chloride and/or Sulfide</li><li>The Analysis of Magnesium Compound Desulfurizer and Compound Desulfurizer in PANGANG</li><li>Effect of Phosphorus on the Mechanical Properties and Microstructure of Interstitial Free Steel</li><li>Study on the Key Technologies of Direct Reduction for Rotary Hearth Furnace Dealing with Carbon Containing Pellets</li><li>Study on Utilization Technology of Vanadium Titanium Magnetite Based on the Rotary Hearth Furnace Direct Reduction Process</li><li>Study on the Lining Erosion of Deep Reduction Electric Arc Furnace in Smelting Metallized Pellets Process Produced by Vanadium Titanium Magnetite</li><li>Study on Desulphurization Technology in RH Refining for Electric Steel</li><li>The Application of the High Alumina Composite Slag in Semi-Steelmaking</li><li>Study on Residual Stress in High-Speed Cutting NAK80 Mold-Steel</li><li>Ultrasound-Assisted Electrospark Deposition of 3Cr2NiMo Steel</li><li>Effect of the Strain Rate on Mechanical Properties and Microstructure of High Strength Low Alloy Steel HC340LA</li><li>A Study on Recrystallization Behavior of Low Carbon Bainitic Steel during Multi-Pass Deformation</li><li>Calculation of Carbon Diffusion Coefficient in Spheroidal Graphite Cast Iron</li><li>Effects of Sintering Conditions on Properties of a Warm Compacted Stainless Steel Powder</li><li>Micromechanical Modelling for Bauschinger Effect of Dual Phase Steel</li><li>Research on Activities of CaO-SiO₂-B₂O₃ (Al₂O₃, Fe₂O₃) Slag System</li><li>Study on Corrosion Behaviors of the PTA Plant in Halogen</li><li>EBSD Investigation on the Primary Recrystallization in Warm Rolled Ti-IF Steel</li><li>GAP-Like Scheduling Model of Byproduct Gas in Iron and Steel Process</li><li>Effects of B₂O₃ and CaF₂ on Melting Properties of CaO-Based Slags</li><li>Chapter 5: Polymer Materials</li><li>Effect of Blowing Agent and Polyethylene Glycol on Cellular Structure and Mechanical Properties of Chloroprene Rubber</li><li>Evaluation of Mechanical Properties of Polyamide 6(PA6) Filled with Wollastonite and Inorganic Modified Wollastonite</li><li>Research on Magnetorheological Elastomers Air Spring Based NR/SBR Rubber</li><li>Research on Electrical Insulating Property of Disk Insulator in High Voltage GIS Insulated Grounding Module</li><li>The Characterization and Synthesis of Polyaniline Doped by Peroxo-Polytungstic Acid</li><li>Performance Enhancements of Polysulfone Ultrafiltration Membranes through Blending with Functionalized Carbon Nanotubes and Polyaniline Nanofibers</li><li>Effect of DS on the Structure and Charged Properties of SPSf/PVDF Blend Membranes via Immersion Precipitation Process</li><li>Synthesis and Characterization of Polyaniline Copolymer</li><li>Applied Research on Modified Polyacrylonitrile Fiber with Collagen</li><li>The Comparative Analysis of Wood-Plastic Raw Material to Heat up the Experiment and Simulation of Heat Transfer Process</li><li>Influence of Diisocyanates on Dynamic Mechanical Properties of Castable Polyurethane Elastomers</li><li>Study on the Properties of Melt Spinning PAN/MWNTs Composite Fibers</li><li>Preparation and Properties of Polybenzoxazine/Lignin Alloy</li><li>Synthesis and Effect of Polycarboxylate Superplasticizer with Two Different Molecular Polyethers as Side Chain</li><li>Effects of Thixotropic Agent and Storage Time on the Rheological Properties of Epoxy Resin</li><li>A New Textile Sizing Prepared by the Hemp Core Cellulose Ethers</li><li>Comparison of the Properties of Akund/Cotton Blended Yarn Produced by Compact Spinning with Pure Cotton Yarn</li><li>Adhesion Effect Model of a Single Biomimetic Fiber Based on JKR Contact Theory</li><li>Study on Processing of Cotton / Akund Fibers Blended Yarn</li><li>Effect of Low Molecular Weight Ethylene Homopolymer on Structure and Properties of Bimodal High Density Polyethylene</li><li>Study on Magnesium Hydroxide Sulfate Whisker and Organo- Modified MMT on Flame Retarded Liquid Silicone Rubber</li><li>Application of SLP Method in Rubber Powder Workshop</li><li>Study on the Structure and the Properties of Akund Fiber</li><li>The Reseach of the Morphology and Mechanical Properties of PA6/POE-g-MAH/OMMT Ternary Blends</li><li>Shear Strength of Void Slab with Polystyrene Forms</li><li>The Influence of Temperature on Toughness of PA6/POE-G-MAH/OMMT Blends</li><li>The Fluidity and AC Impedance of Polypropylene Composites Filled with Activated Carbon Black</li><li>AC Electrical Properties of Titanate-Linkcoupled Carbon Black Filled Polypropylene Composites</li><li>The Effect of Hydrophilic Components of Zinc Based Copolymer on its Self Polishing Behavior</li><li>Study on the Synthesis of Polyester Type Waterborne Polyurethane and Modifying by Nano-Sized Particles</li><li>The Effects of Synthesis Conditions on PUF Microcapsule Morphology</li><li>Chapter 6: Optical/Electronic/Magnetic Materials</li><li>Effect of Nano-CuO on Luminous Intensity of Pyrotechnics Composite Containing KClO₄ and Al</li><li>Explorative Research on the Magnetostriction of Carbon Black Filled Polypropylene Composites</li><li>The Synthesis and Morphology Control of High after-Grow Intensity SrAl₂O₄: Eu, Dy Phosphors</li><li>The Lithium Doping Effect on (Na_0.5K_0.5)NbO₃ Lead-Free Piezo-Ceramics Structure Stability and Ferroelectric Characteristics</li><li>Efficiency Inorganic Thin Film Solar Cells with Flexible Substrate</li><li>The Development of Permanent Strong Magnets and its Application in the Deironing of Kaolin</li><li>Optical and Dielectric Characteristics of Photoactive Layer Thin Films for Organic Photovoltaic Cells</li><li>A LED Reflector Design and Research for Uniform Rectangular Illumination</li><li>The Special Magnetic Transition in Fe_X/(In₂O₃)_1-X Granular Films</li><li>Size and Sp² Fraction Dependence of Energy Gaps in Carbon Dots</li><li>An Alternative Design of Light Delivery System for Heat-Assisted Magnetic Recording</li><li>Research on the New Multilayer Composite Lightning Electromagnetic Shielding Materials</li><li>Synthesis of Diester Based Magnetic Fluid</li><li>Fluorescence Response of Pyrene/Pyrrole Copolymer to Hg²⁺ in the Aqueous Solution</li><li>Photocatalytic Oxidation Thiophene Using Nano-TiO₂</li><li>Luminescent Properties of Zn₂SiO₄:Eu³⁺,Dy³⁺ Phosphors via Sol-Gel Process</li><li>Probing the Structure and Visible Light Photocatalytic Mechanism of LaVO₄/TiO₂ Composite Using XRD, BET, and EPR</li><li>Effects of Y₂O₃ and In₂O₃ on the Electrical Properties of SnO₂-Based Varistors</li><li>Chapter 7: Energy Materials and New Energy Technology</li><li>The Performance Analysis of LPG as the Vehicle Fuel</li><li>Study on Influence of Geometric Parameters on DMFC Performance Based on Experiments and CFD Simulations</li><li>Study on the Preparation and Properties of Li₄Ti₅O₁₂ Powder</li><li>The Influences of Catalysts in the Thermal Decomposition of Barium Nitrate as Pyrotechnic Oxidants</li><li>A Study on PEMFC Faults Diagnosis Based on Wavelet Analysis</li><li>Experimental Studies on Enriching Vanadium from Vanadium Tailings Carbon-Containing Pellets by EAF Melting</li><li>Effect of Fenton Reagent on the Thermal Stability of Proton-Exchange Membrane for Fuel Cell</li><li>Improving the Electrochemical Performance of LiFePO₄/C Cathode by Selection of Carbon Source</li><li>Research of LiFePO₄ as Positive Electrode Materials</li><li>Analysis and Evaluation of Active Based on MnOx-CeO₂ Catalysts in Process of Particle Combustion for Diesel Particulate Filter</li><li>Study on the Harmless Treatment of Valve Regulated Lead-Acid Batteries in Substations</li><li>MPPT Control of Photovoltaic Cells Based on Dynamic Recurrent Fuzzy Neural Network</li><li>Modeling of Photovoltaic Cell Based on BP Neural Networks Improved by MEA</li><li>Chapter 8: Environmental Friendly Materials and Waste Utilization</li><li>Comparative Analysis of Excess Sludge and Digested Sludge Pyrolysis Characteristics</li><li>Synthesis of Magnetic Photocatalystic Particles for Bacterial Control</li><li>A Novel Method for POP Stacking Warpage</li><li>Soil Pollution Prevention Planning of Poyang Lake Ecological Economic Zone</li><li>TCF High-Brightness Bleaching NaOH-AQ Pulp of Fast-Growing Poplar with Low Kappa Number</li><li>Study on Removal of Iron and Manganese from Mine Water by Method of Medicament</li><li>The Impact of Paper Formation on Printability</li><li>Mechanism of CeVO₄/TiO₂ Photocatalytic Degradation of VOCs under Visible Light Irradiation: Electrochemical, Photoluminescence and Active Oxygen Species Study</li><li>Sol-Gel Synthesis of N-Doped Mesoporous TiO₂ with High Crystallinity and High Visible Light Photocatalytic Activity</li><li>Studies on Phosphate Removal from Aqueous Solution by Honeycomb-Cinder Slag</li><li>Properties of the Recycled Aggregate Concrete</li><li>Properties of Municipal Solid Waste Incineration (MSWI) Fly Ash during Heating Process</li><li>Preparation and Characterization of Diatomite-Based Porous Ceramics</li><li>Recycle of Trimethyl Chlorosilane from Chlorosilane Waste</li><li>Synthesis of Cationic Starch Flocculant and Properties</li><li>A Study on the Strengthened Oxygen Delignification of NaOH-AQ Pulp of Fast Growing Poplar with Low Kappa Number</li><li>Chapter 8: Environmental Friendly Materials and Waste Utilization</li><li>Research on the Application of Expanded Perlite Cement Grinding Aids</li><li>Study on the Concentration Process of Glutamic Supernatant Fluid by Vacuum Membrane Distillation and the Reuse of Product Water</li><li>Study on the Reclamation Technology of Alkaline Phenol Formaldehyde Resin Bonded Sand</li><li>Biodegradability of Cellulose Fibers and the Fabrics in Activated Sludge</li><li>Experimental Research on Hybrid Strategy and Desulfurization for White Mud and Coal Slurry</li><li>Chapter 9: Biomaterials and Preparation Technology</li><li>Study on Strategy Improvement of Yeast Transformation Experiment Based on ANP Method</li><li>Design, Synthesis and Biological Evaluation of Novel Fentanyl Analogues as Agonist of ?-Opioid Receptor</li><li>Adhesive Evidence for Gecko-Inspired Biomimetic Fiber: Combination of Experiments and Modeling</li><li>Research on the Scale Density Extraction Technology of Cashmere and Wool</li><li>GC-MS Analysis of Petroleum Ether and Butyl Alcohol Extracts of Longan Seeds</li><li>Electricity Production in Microbial Fuel Cells Using Brush Bio-Anode and Bio-Cathode Made of PAN-Based Carbon Fibers</li><li>Separation of Curcumine (a Functional Food Colourant Material) from <i>Rhizoma curcuma longae</i> by Aqueous Two-Phase Systems</li><li>Novel Preparation and Characterization of Calcium-Strontium Hydroxyapatite</li><li>Crosslinking Characteristics of an Genipin-Fixed Porcine Acellular Dermal Matrix</li><li>Quantitative Effects of Oxygen Supply on Mycelia Growth and Extracellular Polysaccharide of <i>Ganoderma tsugae</i></li><li>Analyze Efficacy of Traditional Chinese Medicine Based on OSC-OPLS-DA</li><li>Particle Loosening on the Surface of Dense Hydroxyapatite in Water</li><li>Research on the Relationship between Strength and Chemical Composition of Hemp Fiber</li><li>Lignocellulosic Microparticles Reconstituted from Legume Straw-1-Butyl-3-Methylimidazolium Chloride-Water Solution</li><li>Establishment and Analysis of the Fermentation Medium Model of <i>Phellinus igniarius</i></li><li>Measurement of Total Phenolics, Antiradical Capacity and Reducing Power of Extracts of Chinese Medicinal Plants</li><li>Preparation Technology of Nanometer Ceramic Particles Reinforced Metal-Matrix Graded Coating by Laser Multi-Layer Cladding</li><li>Chapter 10: Thin Films</li><li>Selective Growth of B-Doped Diamond on Si-Doped Diamond Film</li><li>Characterization of Antibacterial Film Based on PVA and Clove Oil/?-Cyclodextrin Inclusion Complex</li><li>Deposition and Application of CVD Diamond Film on the Interior-Hole Surface of Shaped-Wire Drawing Die</li><li>The Preparation and Properties of Ce_0.5Ti_0.5O₂ Ion Storage Films</li><li>Facile Deposition of Zirconia Optical Films Based on the Solvothermal Treatment of Zirconyl Nitrate-Water-Methanol System</li><li>Bridge Action of Double-Deck Films Interface Electrons</li><li>The Micro-Indentation Detection of Multilayer Structured Transparent Film Based on Dark Field Illumination</li><li>Synthesis of Lithium Thin Film by Electrodeposition from Ionic Liquid</li><li>Corrosion Behaviors in Simulated Body Fluid for TiO₂ Films Deposited on AZ31 Magnesium Alloys by Magnetron Sputtering</li><li>A Uniaxial Tensile Method and its Device Design Scheme Based on Single Rotary Drum Applied for Polymer Films</li><li>Deposition and Characterization of Boron-Doped HFCVD Diamond Films on Ti, SiC, Si and Ta Substrates</li><li>Preparation and Conductive Properties of Ag Thin Film by DC Magnetron Sputtering Method</li><li>Structure and Photocatalytic Properties of Fixed Porous TiO₂ Composite Film on Steel Prepared by Plasma Electrolytic Oxidation</li><li>RETRACTED: Study of Parylene-C Thin Film Deposited on Flat Substrates</li><li>Research on the Influence of N₂ Partial Pressure on the Performance of Ti/Al/N Composite Film</li><li>Chapter 11: Structure Materials and Earthquake Resistant Structures</li><li>Shear Strength of Atypical Reinforced Concrete Pile by Permanent Uni-Wall System</li><li>Fresh Concrete Anti-Carbonization and Application of Patching Material in Carbonizing Concrete Structure</li><li>A Summary of Strength Formation Mechanism of Light Wall Material</li><li>Effect of Binders on the Properties of Chromia/Alumina Refractory Castables</li><li>The Influence of Seismic Behavior of Web-Type Column - Transfer Structure Caused by Rigidity Variation of the Transfer Storey</li><li>The Analysis of a Frame Structure with Additional Shear-Bending Bars under Horizontal Earthquake Action</li><li>Displacement-Based Seismic Design of Steel Frames Strengthened by Buckling-Restrained Braces</li><li>Chapter 12: Functional Materials</li><li>Preparation of Porous Fe-Ni Soft Magnetic Powders by Fe-N Alloys Transformation</li><li>The Research of Microparticle Filling Agent in Protecting Hydrocarbon Reservoir Technology</li><li>Influence of Grain Composition and Sintering Temperature on Performance of Silicon Carbide Refractory Material</li><li>Effect of MnCO₃ on ZnO-Pr₆O₁₁-Co₂O₃-Cr₂O₃ Varistor Ceramics</li><li>Etching Volume Effect on the Morphology of Silicon Etched by Metal-Assisted Chemical Method</li><li>The Research of the Bending Crack Resistance Ability of Reinforced Concrete Beam Mixed with Emulsified Asphalt</li><li>Research on Fire-Resistant Fabric Properties of Basalt Fiber</li><li>Electric-Rheological Properties of Nanometer Titania Doped with Europium Oxide in Hydroxyl Silicone Oil</li><li>Effects of Cross-Linking Agents on Synthesis of Heat-Resistant Resin from Ethylene Tar</li><li>Synthesis and Characterization of Polyaniline Conductive Composite Films</li><li>Study on the Performance of Woven Basalt Filament Diaphragm Fabric</li><li>Analysis of the D3O Materials in Baseball Protective Clothing</li><li>Synthesis of ZnIn₂S₄ via a Surfactant-Assisted Hydrothermal Method and their Visible Light Photocatalytic Properties of MO Degradation</li><li>Effect of Doping Nb₂O₅ on Microstructure and Properties of Piezoelectric Ceramics PSZT</li><li>Visible Light Photocatalytic Degradation of Reactive Deep Blue K-R by BiOI and BiOCl_0.2Br_0.1I_0.7</li><li>Synthesis and Characterization of Thermally Stable B-Doped Polycrystalline Diamond</li><li>Experimental Investigation on Autoclaved Aerated Concrete Using Palladium-Platinum Tailings</li><li>Synthesize Boron Doped Diamond Films on Porous Ti Substrates by DC-PCVD</li><li>Applications of Titanium Dioxide Photocatalytic Technology in Degrading VOC in Cars</li><li>Use of Finite Element Method in Study of Air Conditioning Clothes</li><li>Synthesis of a Novel Hexanedioyl Thiourea Resin and its Adsorption Properties for Ag(I)</li><li>Chapter 13: Surface Engineering/Coatings</li><li>A Study of Double-Coating of Hot-Dip Aluminizing</li><li>Effects of Heat Treatment Conditions on the Mechanical Properties of AA 2024 Alloy</li><li>The Study on Preparation Process Optimization of Ceramic Membrane Layer</li><li>The Effects of Substrate Negative Bias Voltage on Morphology and Properties Base on Multi-Arc Ion Plating</li><li>Research on Corrosion Resistance of MWEDM Surface with Different Electrical Parameters</li><li>Research of a Plasma Arc Metal Surface Strengthening Robot</li><li>The Investigation on Wear Resistance of Fe-Based Alloy Coating by Argon Arc Cladding</li><li>Friction and Wear Behavior of CaO-MgO-Al₂O₃-SiO₂ Glass-Ceramics Prepared by Waste Casting Sands</li><li>Corrosion Characteristic of Double Glow Plasma Hydrogen-Free Carburizing on Titanium</li><li>Features of Workpiece and Orificed Cathodes in Triple-Cathode Plasma Surface Alloying System</li><li>CFD Modelling of Cadmium Telluride (CdTe) Thin Film Coating with Inline AP-MOCVD</li><li>Research on the Tribological Properties of Ni-W Alloy Electric Brush Plating Coatings at Elevated Temperatures</li><li>Process Optimization of Reaction Nitrogen Arc Welding Cladding TiCN/Fe Metal Ceramic Composite Coating</li><li>Study on TiAl(CN) Particle Reinforce Composites Coating Prepared by Reaction Nitrogen Arc Welding Cladding Process</li><li>Research on Transfer Coater with High Precision for Electrodes</li><li>Machined Surfaces Texture Analysis Based on Hough Transform and Run Length Statistics</li><li>Wear Resistance of Plasma Surface Copper Infiltrated on 0Cr18Ni9 Stainless Steel</li><li>Effects of H₂O₂ on Characteristics of Films Formed on Surface of Ti6Al4V in Electrolyte by Micro-Arc Oxidation</li><li>Analysis on Residual Stress in TiN Coating with Different Thicknesses</li><li>A New Surface Reconstruction Algorithm for Noisy 3D Unorganized Points</li><li>Effect of Multilayer Technology on Surface Properties of Diamond Coated Silicon Carbide with Surface Defects</li><li>Preparation of Hydroxyapatite Coatings by Anodizing-Electrodeposition on Pure Titanium</li><li>Effects of C₆H₈O₇ and C₃H₈O₃ in the Na₂SiO₃ Electrolyte on Characteristics of Coating Formed on ZAlSi12Cu2Mg1 by Micro-Arc Oxidation</li><li>Optimization of Process Parameters of Ni-TiN-CeO₂ Binary Nanocomposite Coatings by Ultrasound-Pulse Electrodeposition</li><li>Study on the Control System of Vertical Tin-Plating Process for Semi-Flexible Coaxial Cable</li><li>Tool Deflection Error Regularization and Compensation in End Milling of Contour Surfaces</li><li>Study on the Microstructure of FeCrAl/Aluminum Bronze Composite Coatings Prepared by Supersonic Electric Arc-Spraying</li><li>Microstructure and Wear Resistance of Laser Cladding Nano-Al₂O₃/MCrAlY Composite Graded Coating on TiAl Alloy</li><li>Microstructure and Wear Properties of Laser Synthesized Composite Coatings on Ti-6Al-4V</li><li>Investigation on the Interfacial Bonding Strength between Ni-P-W/Al₂O₃ Composite Coatings and NdFeB Matrix</li><li>Synthesis and Evaluation of Anionic Gemini Surfactant</li><li>Optimization of Processing Parameters for Electrolysis and Plasma Polishing</li><li>Chapter 14: Modelling, Analysis and Simulation</li><li>Springback Prediction Using the Split-Ring Test Based on a Combined Anisotropic Hardening Model</li><li>Modeling and Movement Simulation of the Interior Transmission Mechanism of the Hoist Based on ProE</li><li>Reliability Optimization Design Based on the Blind Number Theory</li><li>Numerical Simulation of Compressive Experiment for Rock with a Natural Interlayer</li><li>Finite Element Simulation Analysis of Hydraulic Support Based on Virtual Prototype Technology</li><li>Numerical Simulation for Cup Shell Deep Drawn by Powder Flexible Cavity</li><li>Modeling and Simulation of Pharmaceutical Powder Compaction</li><li>Three-Dimensional Arc Modeling inside Non-Transferred Plasma Torch</li><li>Influence of Charges Shape on a Closely Air Blast Loading</li><li>A Study on Stoma Arrangement of Air-Cushion Lamination and Numerical Simulation of the Pressure Field</li><li>The Refined Theory of Axisymmetric Circular Cylinder in One-Dimensional Hexagonal Quasicrystals</li><li>Numerical Analysis on Cooling Process of Monocrystal Silicon Rod Manufactured with Czochralski Method</li><li>Numerical Study on a Drop-on-Demand Micro Droplet Print Head</li><li>The Simulation on Double Tank Water Level Control Based MATLAB</li><li>Finite-Element Analysis of Melt Flow in a Vertical Twin-Roll Casting</li><li>The Simulation Optimization for Job-Shop Scheduling Based on Plant Simulation Using Genetic Algorithm</li><li>Simulation Analysis for Supercavitation Projectiles Penetrating into Metal Targets</li><li>The Sensibility of Mold Dilation and Graphite Precipitation for the Simulated Porosity in Ductile Cast Iron</li><li>Numerical Simulation on Temperature Distributions to Cold Store</li><li>Research on Dynamic Balance of Linkage Considering the Influence of Elastic Deformation Based on Simulation</li><li>Hunting Search and Ant Colony Optimization Mechanisms on Modified Simplex Method for Grease Position Parameter Design</li><li>Heat Treatment Process Optimization Using Hunting Search and Ant Sense on Path of Steepest Ascent</li><li>Harmonic Analysis on Feed Kinematic Behaviors in Turning of Regular Polygon Section</li><li>Visualization of Random Particle Packing Model for Resin Concrete</li><li>Finite Element Analysis of Friction Effect on Deformation Behavior of Copper Rods in a Modified C2S2 Process</li><li>The Model and Simulation of SMT Production</li><li>Establishment of an ANSYS-Based Constitutive Modeling for Age Forming of Aluminum Alloy</li><li>Optimisation of Manufacturing Process Models via Intelligent Water Drop Algorithm</li><li>Modeling Flow Stress and Microstructural Development during Hot Working</li><li>The Pressure Distribution around Particles in Fluid in Confined Wedge Space</li><li>Effects of the Flow Speed on Dendritic Growth in Phase-Field Simulation of Binary Alloy with Convection</li><li>Process Parameters Modeling and Optimizing for Compound Machining with Ultrasonic Vibration on SiC Wafer</li><li>A Prediction Model of Deflection of Fixing Thin Parts</li><li>Simulation of the Wind Field of Gantry Cranes Based on FLUENT</li><li>Parameter Identification Model with the Control Term in Batch Anaerobic Fermentation</li><li>Modeling and Analysis of the Effect of Preloaded Pressing Force on Gap Formation during the Drilling of Double-Layered Material</li><li>The Research of Drilling Processing Technology Based on Fuzzy Optimization Design</li><li>Numerical and Experimental Research on the Feasibility for Plasma Arc Forming of Laminated Clad Metal Sheets Containing Defects</li><li>Establishment and Application of a Mathematic Model of Negative Pressure Equipment</li><li>Emerging Solutions in Modeling of Asymmetric Threats Regarding the Aeronautical System</li><li>Modeling and Optimization of Vibration Amplitude in Turning of Ti-6Al-4V Using Response Surface Methodology</li><li>Chapter 15: Materials Processing Technology</li><li>Modeling and Optimization of Vibration Amplitude in Turning of Stainless Steel AISI 304 at Various Tool Overhangs</li><li>Research and Application of Wire Cutting Mold Surface Roughness</li><li>Inserts Selection for Intermittent Turning of Magnesium Pieces</li><li>Vibration Drilling the 0Cr18Ni9Ti Stainless Steel Micro-Hole</li><li>The Effect of Temperature and Strain-Rate Sensitivity on Formability of AA 5754</li><li>A Study on DOE Methods for Hydromechanical Deep Drawing Process Parameters</li><li>Deformation of Serrated Chips Based on Minimum Energy Consumed for High Speed Machining</li><li>Research Progress of Methods to Improve Fatigue Strength of Welded Structures</li><li>Finite Element Mesh Model Analysis and Model Information Transform Method in Casting Simulation Process</li><li>Finite Element Numerical Simulation of Tubing Premium Connection</li><li>Surface Roughness Predictive Model of UNS A97075 Aluminum Pieces Obtained by Dry Turning Tests Based on the Cutting Forces</li><li>The Composition Forecasting Research for Cupola Melting Process</li><li>Study of the Machining Principle and Influencing of ELID Grinding on SiC</li><li>Simulation and Experimental Analysis of Moulding Processes of Glass Diffractive Optical Elements</li><li>Preliminary Study on the Rotational Indexing Machining Technology of Straight Bevel Gear</li><li>Rebound Deformation of Thin Part Caused by Clamping Force in End Milling</li><li>Experimental Study on the Possibilities to Decrease the Coefficient of Restitution after Impact</li><li>
<i>In Vitro</i> Study on Dental Abrasive Finishing of Restorative Ceramics Using Diamond Burs in Dental Surgery</li><li>Practice and Analysis of the Technology of Direct-Tapping</li><li>Study on Microstructure Evolution in GH4169 Alloy Blade during Finish Forging</li><li>Advance in Chip Breaking Detection System by Monitoring of Cutting Temperature</li><li>Numerical Investigation of Manufacturability of Various Compound Shapes Using Sheet Hydroforming Process</li><li>Micro Hole Elliptical Supersonic Boring Quality Research</li><li>Influence of Technological Parameter for Ramie Yarn Hairiness on Compact Spinning with Suction Groove</li><li>Design and Performance Assessment of a 5-Axis Ultra-Precision Micro-Milling Machine</li><li>Rotary Ultrasonic-Assisted Grinding of Ceramic Material</li><li>Weld Quality Prediction for Resistance Microwelding of Fine Cu Wire Based on the Back-Propagation Neural Network</li><li>Study on Roller Profile for Cam Forming by Cross Wedge Rolling</li><li>Structure Design and Experimental Research on Spiral Boring Tool</li><li>The Effect of Axial Cutting Edge Angle on the Axial Milling Force of Helical Milling</li><li>The Effect of Welding Materials on 1Cr18Ni9Ti and 2Cr13 Steel Welding Joints Microstructure and Mechanical Properties</li><li>Temperature Field and Extrusion Load in Needle Piercing Extrusion Process Based on Ingot Billet for Large 7075 Aluminum Alloy Tube</li><li>Stress Field Simulation of Compound Cast Rollers during Centrifugal Casting Process</li><li>Simulation and Analysis of Stroke-Controlled Tube Hydroforming by Finite Element Method</li><li>Effects of Press on Compression Molding Bonded NdFeB Magnets' Quality</li><li>Research of Fatigue Stress Cracking for Injection Mold Cavity Based on Ansys Workbench</li><li>Mechanism for Mechanical Properties of the A357 Connection Beam Casting from Solidification</li><li>Tooth-Leap Shaping Method for Helical Gears</li><li>Research on Friction Behavior in Tube Hydroforming Process</li><li>Predictive of Electron Beam Focus Position by Metal Powder Temperature</li><li>Design of LPDC Process for Thin-Walled Casting Based on Numerical Simulation</li><li>The Effect of Vibration on the Surface Topography in Micro-Milling</li><li>Numerical Simulations of the Influence of the Tool Geometric Parameters on Cutting Forces and Temperatures in High-Speed Machining of Ti₆Al₄V</li><li>First Principles Calculation on Adsorption of S on Fe(100) with Different Pressure</li><li>Research on the Molding Technology of Bonded NdFeB Magnets</li><li>Precision Control Calculation Method and Forming Technology of Aluminum Alloy Base</li><li>Test Study of Nickel-Base Superalloy 718 Superfine Deep-Hole Drilling</li><li>Chapter 15: Materials Processing Technology</li><li>Processing of Grinder Plate with Bone Chips Removal Facilities Based on CAD/CAM</li><li>Study of Ageing Treatment on Spray Forming Al-Zn-Mg-Cu Alloy</li><li>The Research on Fatigue of Crankshaft with the Method of Explicit Dynamic</li><li>The Influence of Longitudinal Magnetic Field on DCEN MAG Welding</li><li>The Design of X-Ray Testing System of SMT Solder</li><li>Study of Solid Solution Treatment on Spray Deposited 7A04 Alloy</li><li>Grinding Performance of Metal-Bonded CBN Wheels with Regular Pores</li><li>Experimental Study of Ultrasonic Vibration Drilling Ceramic Material</li><li>Study on the Two-Side Direction Burr in Grinding-Hardening Machine Based on Orthogonal Experimental Method</li><li>FEM-Based Design and Analysis of a Smart Cutting Tool with Internal Cooling for Cutting Temperature Measurement and Control</li><li>Experimental Investigation of Mechanical Micro Machining for AL6061-T6 Material</li><li>Multi-Objective Optimization of the Loading Path in Tube Hydroforming Process Using NCGA</li><li>Effect of Charge Action on the Annular Molten Metal of Spray Forming</li><li>Experimental Study on Drying Process of Green Body in Gelcasting of Metal Part</li><li>Shape Forming of Alumina by Step Pressure-Vacuum Hybrid Slip Casting</li><li>Comparsion of Foundry Properties of Traditional Foundry Sand and Microspheres</li><li>The Influence of the Center-to-Center Distance on the Accuracy of the Serration with the New Gear Hob</li><li>Experimental Evaluation of Surface Roughness in Orthogonal Micro-Milling Processes</li><li>Transient Liquid Phase Bonding of Aluminum Using Aluminum Base Interlayer under Argon Flux</li><li>Microstructure of Al-Li Alloy Electron Beam Welding Joint after Post-Weld Heat Treatment</li><li>Analysis of Thermal Stress during of Twin-Roll Casting of Magnesium Alloy</li><li>The Technology of Multistage Extrusion for Thin Walled Brass Cylinder</li><li>The Effect of Strain Field on Texture and Microstructure Evolution in Homogeneously Cold Rolled 93/7 Brass</li><li>Influence of Inner Cooler on Flow of Molten Steel in Slab Continuous Casting Mold</li><li>The Simulation and Experimental Analysis of Non-Abrasive Cryogenic Polishing on Metal Cylindrical Surfaces</li><li>The Effect of Mill Temperature on the Texture and Microstructutre Evolution in Warm Rolled ?-Brass</li><li>Numerical Analysis of Liquid Ammonia Storage Tank Welding Stress</li><li>Numerical Simulation on the Multi-Point Forming of Sail Surfaces under Force-Displacement Separated Control</li><li>Automatic Segmentation of Pores in Weld Images Based on Transition Region Extraction</li><li>Effect of Die Angle on Electromagnetic Riveting Interference</li><li>Study of Bulging-Pressing Compound-Deforming Automobile Axle Housing with a Common Press</li><li>Prediction on Cutting Heat of the Simulation in NC Lathe</li><li>Influence of Surface Remelting Process on Corrosion Resistance of Welding Joints for SUS304 Stainless Steel by Electrode Arc Welding</li><li>Analysis of Microstructure and Micro Mechanical Properties for Weld Joints of 1000MPa Class Steel by Nanoindentation Technique</li><li>Stress Analysis and Failure Mechanism of H13 Steel Hot-Forging Die for Automobile Engine Crankshaft</li><li>Key Technologies Research on Color Contour Map of 3D Injection Molding Simulation Results</li><li>Numerical Simulation of the Effect of Punch Paths on the Quality of Sheet Metal Stretch Forming</li><li>Numerical Simulation on the Influence of Heated Mold Continuous Casting Process Parameters to Solid-Liquid Interface</li><li>Minimum Quantity Lubrication (MQL) Using Ranque - Hilsch Vortex Tube (RHVT) for Sustainable Machining</li><li>Rapid Prototyping of Aerodynamics Research Models</li><li>Study on Hot Stamping Process of Cannonball Body Semiproduct Based on Numerical Simulation</li><li>Supply Abrasive System of Premixed Abrasive Jet and Derusting Application</li><li>Microstructure and Recrystallization Behavior of an as-Extruded PM Nickel-Base Superalloy</li><li>A Study of Hollow Jet on Spray Forming</li><li>Numerical Simulation for Technological Parameters of Vibratory Stress Relief in Large Welding Structures</li><li>The Adaptive Control of Grinding Force of CNC Cam Grinder Based on Neural Network</li><li>Contribution to Milling of Materials on Ni Base</li><li>Advances in Theoretical Investigation of Work Hardening for Metal Cutting</li><li>Analysis of Volumetric Shrinkage and Optimization of Process Parameters in Injection Molding</li><li>The Sealing Welding of Helium-Filled Hole on Nuclear Fuel Rod</li><li>Automatic Welding Method and Main Parameters Calculation of Tube Connected Five-Star Feet</li><li>Effect of Different Contents of CeO₂ on Microstructure and Properties of Roller Surface Alloyed by Laser</li><li>Study on Ausform Finishing Process and Gear Tooth Deformation for Hardened Gears</li><li>Research on Tool Wear and Compensation Method of Ultrasonic Milling</li><li>Research Status of High-Pressure Water Jet Incremental Sheet Metal Forming and Research on a New Method of the Straight-Walled Sheet Metal Part Forming</li><li>Influences of Blank Holding Force on Stamping of Large Ellipsoidal Heads Based on Simulation</li><li>Investigation of High Cycle and Low Cycle Fatigue Interaction on Fatigue Behavior of Welded Joints</li><li>Optional Roughing Tool Diameter Sequence Determination for Pocket: Integrated Geometric Characteristics and Processing Rules</li><li>Adaptive Model to Apply the Upper-Bound Theorem in Plain Strain Forging</li><li>Finite Element Analysis of Pharmaceutical Tablet Compaction</li><li>Study on Extending Tool Life of Micro WC Drills by Various Protective Coatings</li><li>Welding Deformation Controlling for the Truck Rack Girder</li><li>Experimental Investigation on Cutting Performance of Face Milling Cutter</li><li>Molding Plano-Convex Lenses Using a through-Hole WC/Co Plate as the Mold</li><li>Discussing for a Rapid & Flexible Casting Design Method Based on Modeling, Simulation and Rapid Prototype Machine</li><li>An Optimization Design for Coefficient of Weld Reinforcement in Rapid Prototyping Based on Robotic Pulse MAG Forming</li><li>Numerical Study of Transverse Impact Response of Single-Lap Adhesively Bonded Joint</li><li>Finite Element Analysis of the Combined Effect of Strain Hardening and Friction in Elementary Processes of Forging</li><li>Study on Machining Characteristics of Ultrasonic Vibration Assisted Micro-EDM</li><li>Study on Thinning of a Boron-Doped Polycrystalline Diamond Wheel-Tool by Micro Rotary W-EDM Approach</li><li>Analysis of Main Optimization Techniques in Predicting Surface Roughness in Metal Cutting Processes</li><li>Robust Process Design towards through-Silicon via Quality Improvement Based on Grey-Taguchi Method</li><li>Investigation of Vibration and Surface Roughness in Micro Milling of PMMA</li><li>Overviews of the Behavior of Heat Transfer of Soft-Contact Electromagnetic Continuous Casting Mold</li><li>An Investigation of Heat Affected Zone of Round Steel Rods Welded by Friction Welding</li><li>Helical Drills Wear during Drilling of a New ELC Austenitic Stainless Steels</li><li>Development of Mathematical Model for Chip Serration Frequency in Turning of Stainless Steel 304 Using RSM</li><li>Chapter 16: Laser Processing Technology</li><li>Femtosecond Laser Micromachining of High Quality Groove on Sapphire Surface</li><li>Investigation into Indirect Selective Laser Sintering Alumina Ceramic Parts Combined with Cold Isostatic Pressing</li><li>Variable White-Light Filaments Induced by Femtosecond Laser in PM567-Doped PMMA</li><li>Simulation of Temperature Field and Thermal Stress Field during Laser Drilling</li><li>Low-Temperature Polycrystalline Silicon Thin-Film Transistors Enhanced by Diode-Pumped Solid State Green Continuous-Wave Laser</li><li>Numerical Study on Strengthening Effect of Laser Shot Peening for Wrought Magnesium Alloy</li><li>Research of Fiber Laser Cladding Technology on Shaft-Parts</li><li>The Research on the Quality of the Cutting Mouth for Laser Blanking</li><li>Micro Dimple Fabrication on OFHC Copper by Laser Shock Processing</li><li>Laser Instant Shaping of Surface Microstructure Based on Function</li><li>Laser Ablation of Ti-Al Alloy in Vacuum and Air Environments</li><li>Research and Design of Laser Scribing Robot Based on Surface Matching</li><li>Effect of Laser Irradiation Parameters on Healing Fatigue Damage for Polycrystalline Copper Film</li><li>Chapter 17: Mechanical Behavior and Fracture</li><li>Failure Analysis on Spring of Boiler Drum Safety Valve</li><li>Mechanical Analyze of Casing Failure with Sand Production in Loose Sandstone Reservoir</li><li>Crack Propagation and Simulation of Thermal Fatigue</li><li>Study on Eliminating the Effect of Bending Moment in Torque Measurement</li><li>Wave Induced Deformation and Stress Responses in HDPE Circular Net Cage: A Numerical Approach</li><li>Effect of Initial Grain on Mechanical Properties of AZ31 Alloy during Warm Forming</li><li>Twin-Shear Yield Criterion for V-Notches Brittle Fracture under Mixed Modes</li><li>Application of the R-Function Theory and Least Square Method for Torsion Problem with H-Shaped Cross-Section</li><li>Stress Analysis under Cu Bump Bonding Process</li><li>Test of Metal Material Fracture Toughness by Finite Element Simulation and Moire Interferometry</li><li>On the Measurement of Roller Skew of Tapered Roller Bearings</li><li>A Novel Triangle Element Formulation for Static Analysis of Solids</li><li>Study on Crack Detection System of PC Beam Surface</li><li>The Prediction of the Mechanical Properties of Gray Cast Iron Based on the Anatomy Experiment of the Engine Cylinder Head</li><li>Fatigue Strength of Shaft with Diameter Enlarged Partially by Cyclic Bending and Axial Compressive Loading</li><li>Analytical Procedure for Geometrical Evaluation of Flat Surfaces Formed by Multiple Indentation Processes</li><li>Mechanical Properties of AlMgB₁₄ Prepared by Field-Activated, Pressure-Assisted Synthesis Process</li><li>Constitutive Equations for a Model of Nonlocal Plasticity which Complies with a Nonlocal Maximum Plastic Dissipation Principle</li><li>A Consistent Formulation of Constitutive Relations for a Model of Nonlocal Viscoplasticity</li><li>Prediction of Surface Fracture of 6061 Al Processed by Equal-Channel Angular Pressing</li><li>Chapter 18: Tooling Testing and Evaluation of Materials</li><li>Quality Assessment of Weldable Steel Mark P355NH from Decompression Chamber Construction for Diving</li><li>Influence of Low-Level Voltage in Pulse ECM on Electrode Wear and Machining Accuracy</li><li>Effect of GaN Cap Layer on the Electrical Properties of AlGaN/GaN HEMT</li><li>A Simple and Sensitive Spectrophotometric Method for the Determination of Trace Ruthenium with its Catalytic Effect on the Oxidation of Rhodamine 6G by KBrO₃ in Micellar Media</li><li>Experimental Study on Friction Damping Characteristics of Metallic Materials with Non-Conforming Contact</li><li>Thermal Deformation in a Static Pressure Dry Gas Seal</li><li>Wear Resistance of Nano TiN Strengthen High Chromium Cast Iron</li><li>Probabilistic Safety Factor of Soil Liquefaction</li><li>Study on Mathematical Model of Radial Runout Error</li><li>Analysis of Dimensional Accuracy of Spun Parts by Taguchi Approach</li><li>Evaluation of Residual Stresses in Butt-Welded Joints by Residual Magnetic Field Measurements</li><li>Parametric Analysis of Shear Behavior of Concrete Beams Reinforced with Continuous FRP Rectangular Spirals</li><li>A Practical Evaluation Approach to Form Deviation for Surface of Revolution Based on Discrete Point Coordinate Data</li><li>Influence of the Metal Sheet Parameters on the Results of the Erichsen Test</li><li>Chapter 19: Thermal Engineering Theory and Applications</li><li>Temperature Model of an Advanced Artificial Lift Technology--Cyclic Nature Gas Heat Insulation and Geothermal Temperature Heating Technology</li><li>Unsteady Numerical Simulation and Ground Tests of a Tailplane Electrothermal De-Icing System</li><li>Induction Heating Furnace Temperature Control Based on the Fuzzy PID</li><li>Thermal Design and Thermal Analysis of Control Cabinet for Pattern Sewing Machine</li><li>Prediction of Heat Dissipation Effect by Simulating Radiator Group of Mining Dump-Truck</li><li>Effect of Processing Parameters on Heat Transfer Performance of the Heat-Pipe Grinding Wheel</li><li>Analysis of Unsteady State Heat Conduction Performance in Anisotropic Materials</li><li>Sub-Optimal Control for Nonlinear Heat Equations</li><li>Numerical Predicts of Flow and Heat Transfer in Joule-Heated Rectangular Pool</li><li>The Gas Phase Reaction Crystallization Mechanisms of Amorphous SiCN Ceramic Annealed in Vacuum</li><li>The Two-Scale Finite Element Estimates for Thermoelasticity in Perforated Structure with Boundary Layer</li><li>Investigation on Numerical Calculation of Thermal Boundary Resistance between Superconducting Magnets</li><li>Research on Structural Analysis of Steering Based on Thermal-Structure</li><li>Necessity Analysis of Tundish Heating Technology Application</li><li>Thermal Analysis and Research of Multi-Chip Component Substrate Based on Different Thermal Conductivity Models</li><li>Study on Thermal Deformation of Machining Center's Spindle Box Based on ANSYS</li><li>Design and Fabrication of Micro-Variable Radiator</li><li>Chapter 20: Detection and Control Technology</li><li>Design and Manufacturing of a Constant Volume Test Combustion Chamber for Jet and Flame Visualization of CNG Direct Injection</li><li>Rolling Bearing Fault Diagnosis Based on Blind Source Separation</li><li>The Application for Underwater Special Monitoring Equipment Based on the PELCO-D Protocol</li><li>Investigation of Machining Characteristics of Ultrasonic Vibration Assisted ECM</li><li>A Case of Structural Integrity of Ageing Fighter Aircraft Leveraging on Condition Maintenance Methodology</li><li>Propagation Characteristic in 2D Phononic Crystals with Bending Linear Defect</li><li>System of Premixed Abrasive Jet Cleaning and Derusting on Steel Tube Inwall</li><li>On-Line Detection Distribution Strategy Research of Complex Surface Based on Bayesian Networks</li><li>Method of Identifying Key Quality Characteristics in Multistage Manufacturing Process Based on PLSR</li><li>Transformer Fault Diagnosis of Rough-Neural Network Based on MEA</li><li>Hydrodynamic Noise and Radiated Mechanism of 3D Cavity</li><li>The Study on the Ultrasonic Testing and Defects in Quantitative Analysis for the Scroll-Type Profile</li><li>Concurrent Tolerancing Design Based on Time Value of Manufacture-Quality Loss Cost</li><li>Survey and Analyze the Line Output Characteristics in Inkjet Printing</li><li>A Directional Multivariate Control Chart for Monitoring Univariate Autocorrelated Processes</li><li>The Application Research of PIC16F877 in the Pulse Power of WEDM-HS</li><li>Development of <i>In Situ</i> SAXS Detection System for the Pre-Oxidation and Carbonization of PAN Precursor</li><li>New Methold on Power Transformer Fault Diagnosis</li><li>A New Detection Way for Single- Phase to Ground Fault Based on Energy Function Intergral and Wavelet Packets</li><li>A New Circuit Detection Method and an Anomalous Frequency Recognition Algorithm</li><li>Pre-Buckling Transverse Free Vibration of an Asymmetrically Supported Euler Beam Subjected to Distributed Follower Forces</li><li>The Effect of Damper Components on the Performance of Impact Damping</li><li>The Study of Fault-Diagnosis Method of Reciprocating Compressor Based on Fuzzy Fault Tree Theory</li><li>Wind Speed Forecasting Based on Variable Weight Combination Model of Neural Network and Grey Model</li><li>Analysis and Design of PCB Multistage Process Quality Management Information System</li><li>High-Speed and High-Accuracy Schemes of Coordinate Calculation and End Point Judgment for Elliptic Interpolation</li><li>A Six-Probe Scanning Method for Guide Rail Straightness Measurement</li><li>Noise Character of Cooling Tower and Control Discussion</li><li>The Evaluation about Vibratory Mixing Methods</li><li>Gear Fault Diagnosis Based on Harmonic Wavelet Packet and BP Neural Network</li><li>Study on Chip-Breaking Technology for Numerical-Control Varying-Feed Drilling of Deep Hole</li><li>Research on a Method of Fault Signal Extraction Based on Improved Algorithm</li><li>The Error Analysis and Detection of A/C Axes Bi-Rotary Milling Head</li><li>Prediction of Top Coal Caving Ability Based on Support Vector Machine</li><li>Adaptive Interpolation of Tool Posture Vector in Five-Axis Flank Milling</li><li>Effect of Structure Parameters on Dynamic Characteristics of Piezoelectric Vibrator in Ultrasonic EDM Processing</li><li>Improved Atomic Force Microscopic Inspection Process of Liquid Crystal Display</li><li>Fault Diagnosis of Chemical Process Based on ACO-BP Neural Network</li><li>Fault Diagnosis for AP1000 Plant Feed Water System Based on the Fault Petri Net</li><li>Application Study on Automatic Particle Count Technology Used in Fuel Filtration Efficiency Test</li><li>Multiaperture Connection Method for Three-Dimensional Mesasurement Based on Quaternion</li><li>The Analysis on Controllability of Angular Ball Bearings with Considering the Installation Errors</li><li>Application of Copula in Reliability Theory</li><li>Application of FastICA Algorithm in Wind Turbine Condition Monitoring</li></ul>