Mechanical Engineering and Green Manufacturing

Reviewers and Committees
Preface
Study on Composite Material Mechanics Model of the Cement Loop Damage Mechanism in Destroyed Casing Well
Gear Reliability Design Using Probability Finite Element Method Based on Response Surface
Collaborative Optimization for the Cold Extrusion Die and Process Parameters of Wheel Hub Bearing Rings
Influence Factors on the Junction Line Entering for High-Temperature Alloys in Resistance Seam Welding
Stochastic Finite Element of Structural Vibration Based on Sensitivity Analysis
Analysis of Weld Formation Mechanism and Weld Pool Dynamic during Moving Laser-MIG Hybrid Welding
Numerical Analysis for Dynamic Characteristics of New Launcher with Coupled Rigid and Flexible Motion
Optimal Design of Drive System in Wind Power Generation Acceleration Gearbox Based on Matlab
The Optimum Design for the New-Typed Auto-Eliminate Backlash Mechanism in Gear Transmission
Optimal Design of Structural Vibrationbased on Stochastic Finite Element
Inverse Mode Problem in the Discrete Model of Circular Plate Axial Symmetry Vibration
Research on Evaluation Index System for Green Manufacturing Based on PSR Model and Life Cycle
Temporal Inference and Simulation in Collaborative Design Process Based on Time Petri Net
T-S Fuzzy Model-Based Fault Diagnosis of PEM Fuel Cell Engine
A Study on Objective Functions for Springback Control in Multi-Objective Optimization of Sheet Metal Forming Process
Strength Analysis of Dual-Chamber Hydrodynamic Coupling Based on One Way FSI
Study on the Difference of Frontal Impact Response among People of Different Sizes
Streaming Potential Induced by Canaliculi Fluid Flow: A Fluid-Filled Thick-Walled Cylinder Osteon Model Subjected to Axial Loading
Analytical Analysis Method for Number of Spare Parts of Typical Systems
Design and Implementation of Two Axis Tool Table Control
Design and Implementation of Device Cooperation Middleware for Earthquake Precursor
A Spatial 3-DOF Translational Compliant Parallel Manipulator
Application and Non-Homogeneous Index Grey Model NIGM(1,1,k)
Analysis and Improvement of Random Number Generating Algorithm
Fusion Method for True Value Estimation of Manufacturing Quality under Condition of Poor Information (Part I: Theory)
Fusion Method for True Value Estimation of Manufacturing Quality under Condition of Poor Information (Part II: Experiment)
Performances of the Hybrid Active Desiccant Wheel System with Type III Desiccant
Surface Analysis of Electrical Arc Residues in Fire Investigation
Research on a Kind of New Green Precision and Micro-Manufacturing Technology
An Experimental Study on Oil-Air Lubrication of Sliding Friction Element
An Approach for Construction of Fault Trees Using Rough Set and Fuzzy Clustering Algorithm
Design on Parameterized Drafting System of Centrifugal Fan
Semi-Rigid Analysis of Extended End Plate Connections Based on Correlation and Sensitivity
Finite Element Analysis of C Axis of High-Power Direct-Drive Bi-Rotary Milling Head
Finite Element Analysis on Structural Stress of 8x8 InSb Infrared Focal Plane Array
Finite Element Analysis on Structural Stress of 64x64 InSb Infrared Focal Plane Array
Real-Time Soft Shadow Generating in Three-Dimensional Scene
For the Shipbuilding Enterprise Model of Intelligent Recommendation Services
Study on Aging Characteristics of Warm Mix Asphalt: Using Softening Point as a Parameter of the Aging Kinetics Model
Analysis of the Gearing Theoretic between Plastic Helical Gear and Steel Worm
Experimental Study on Slab Track Passenger Transportation Special Line Roadbed Power Response
Weld Performance of Joint of Beam to CFST Column with Interior Strengthening Ring
Simulation Research of Saw Angle Adjustment System for Sliding Table Saw Based on MATLAB
Study on Two Kinds of Pneumatic Booster Valves
The Effects of the ACL Reconstruction Tunnel(s) on Patellofemoral Contact
Adaptive Multiple Impedance Control Based on Passivity
Solution for a New Sub-Problem in Screw Theory and its' Application in the Inverse Kinematics of a Manipulator
The Complex Dynamical Behaviors of Lateral Vibration of Tire
Investigation on Machining Characteristics for Tangential Ultrasonic Vibration Assisted Grinding
Numerical Analysis of Structural Reinforced Concrete Elements under Severe Impulsive Loads
Investigation of the Tribological Properties of Si3N4 Ceramic Pair Lubricated by Emulsion with Different Functional Group
A Peak Identification Method of Vibration Signal on Diesel Engine Cylinder Head in the Absence of TDC Signal
Misfire Diagnosis of Diesel Engine Based on Short-Time Vibration Characters
The FNN Quilting Process Deformation Prediction Model
Study on the Intelligent Controller of DTC System at Low Speed
Evolutionary Optimization on Turning Linkage of Automobile in Simulated Annealing
Design and Experiment Research of a Non-Contact Optical Fiber F-P Ultrasound Sensor for Detecting Surface Defects
Carbonation Test Study on Low Calcium Fly Ash Concrete
Rolling Element Bearing Condition Monitoring and Diagnosis
Researches into Influence of Process Parameters on FDM Parts Precision
Co-Service Manufacturing System Integrated OPC UA/FDT for Complex Equipments & Field Devices
Microstructure and Properties of Super Plastic Diffusion Bonded 00Cr25Ni7Mo3N Duplex Stainless Steel Joint
Thermal Cracking Meso-Characteristic of LuHui Granite
Study on Simulation Reliability Test of Machining Center
Element Characterization of AlZnO by Laser Induced Breakdown Spectroscopy (LIBS)
Geometrically Nonlinear Analysis of Long Span Composite Girder Cable-Stayed Bridge with Three Towers under Live Load
Numerical Investigation on Aerodynamic Performance for Guiding VAWT with Combined Blades
Elasto-Plastic Cellular Automaton Simulation of Fracturing Process in Single Pre-Fractured Rocks under Uniaxial Compression
Reliability Analysis of Supply Chain Based on GO Methodology
An Elastic Dynamic Analysis of a Nonhomogeneous Moderately Thick Plate Using the Meshless Local Petrov-Galerkin Method
Crashworthiness Optimization Using Response Surface Method Based on Uniform Design
Research of Simplified B Pillar Model for Roof Crashworthiness
Investigations on Twisted Blade for Axial Microfan
Optimization of Generator Structure and Additional Anode Access Method of MDAM System
Dynamic Properties Analysis of Electromagnetic Gear Driving System
The Interaction between a Dislocation and Circular Inhomogeneity in 1D Hexagonal Quasicrystals
Thermal Paints Color-Temperature Intelligent Interpretation
Discharge Flow Ripple of Axial Piston Pump with Conical Cylinder Block
Chaotic Calculation and Prediction on Volume Deformation of MgO Concrete Based on Lyapunov Exponent
Modeling and Simulation of PCB Assembly under Board-Level Drop Impact
Defect Detection in Seven-Wire Steel Strands Using Single Magnetostrictive Transducer with Two-Layer Coil
Artificial Neural Network Analysis Method of Concrete Performance Based on Virtual Data Samples
Study on Bifurcation of Rigid Rotor Roller Bearings System Considering Nonlinear Dynamic Behavior
The Study of Corner Echo Inspection with Bulk and Creeping Waves Effect in Ultrasonic Testing
A Novel 3-D Topography Model for Micro-Manufacturing Process Simulations
Behavior-Based Fuzzy Control of Obstacle Avoidance for Indoor Mobile Robot
Intelligent Fault Diagnosis Method Based on Reliability Analysis
Study on Discharge Characteristics of Piezoelectric Self-Adaptive Micro-EDM System
A Fast Collision Detection Algorithm in Virtual NC Machine Tool
Optimization of Maximum Entropy Model of Bayesian Prior Distribution Based on HPSO
Modeling and Estimating Thermal Error in Precision Machine Spindles
A New Vehicle Speed Estimation Method Based on the Longest Radial Crack on Windshield
Study on an Integrated Child Safety Seat
Modeling and Simulition of Hydraulic AGC System for 1100mm Cold Rolling Mill
Measures for Improving Reliability of the Machining Center
Experimental Investigation on Dynamic Characteristics of a FEAD System: Affected by Serpentine Belt Length
The Application of Pseudo-Excitation Method to the Ride Comfort Research of Wheel-Loader
Optimization of the Rollers System of Aluminum Strip Rolling Mill Based on the Stochastic Vibration
Proposal of Power Determination and Measurement of Compressible Air
The Comparison of Isotropic and Anisotropic Diffusion Techniques for Image Denoising
Design and Optimization of High-Viscosity and High-Density Drilling Fluid Separation System
Transient Thermal Analysis of Spiral Bevel Gears under Loss of Lubrication
A Trajectory Privacy Preserving Method in Peer-to-Peer LBS System
Boiling in Microchannels with Refrigerant Mixtures
Static and Dynamic Characteristic Analysis of XDK650X Engraving and Milling Machine
Research on the Degradation of VOCs under Visible Light Irradiation Via Nano-Coating
Computer Simulation on Intensity Distribution of UV Irradiation System
Virtual Fatigue Test of Auto Parts Based on Non-Structural Road Driving Simulation
Research on Optimization of Air Blowing System
Based on Continual Development of Remanufacture for Heavy Duty Caterpillar Engines and its Remanufacturing Technology
Mechanical and Tribological Properties of Multi-Element CrTiAlN Coatings for Dry Cutting Deposited by Magnetron Sputtering Technologies
Tool Overhang Effect on Cutting Force in High Speed Milling
Analysis of Structure Capital Impact on Knowledge Flow within Supply Chain
Design and Implementation of Data Interchange Platform for Earthquake Precursors
Modeling and Analysis of Process Parameters on State Variables in WEDM of TiB2 Nanocomposite Ceramic
Experimental Study of Dynamic Fracture Behavior of PVB Laminated Glass by High-Speed Photography
Numerical Simulation of Riveting Process
Parameters and Experiments on the Precision Forming Process of Spline Cold Rolling
Association Rules Mining in Manufacturing
Time-Wavelet Energy Spectral Analysis for Fault Diagnosis of Rolling Element Bearings
A Wireless Sensor Network Based Vibration Monitoring System: Architecture, Principle and Validation
Investigation of Machinability in Minimum Quantity Lubrication Milling of GH4169 Aerospace Superalloy
A Monitoring and Diagnosis System for Heavy Duty Diesel Engines: Design, Implementation and Application
Structure Improvement of the S Beam Based on the Safety of SUV
Simulation and Analysis of EDM Notch Process Based on Killing and Activating Elements
AFM?XPS and Raman Study on Low Temperature Ammonia Plasma Treatment of Carbon Fiber
Genetic Algorithm Based Product Innovation Design Methods and its Application in Bag Design
Nonlinear Transient Analysis of Butt Welding Based on Finite Element Method
Research on Innovative Product Design Method and Support System for Man-Machine Cooperation
A Policy-Oriented Reputation BDI Model
Overview of Policy-Oriented and Trusty Multi-Agent System Research
Porous Media Modeling with Integrated Approach and Application in Water Flow Simulation
Using Particle Swarm Optimization Based Neural Network for Modeling of Thrust Force Drilling of PA-6/Nanoclay Nanocomposites
Application and Technology of Generalized Green Computing
Viscosity Variation of Polymer Solution through Low Permeability Cores
Numerical Calculation for Subsonic Compressible Supercavitating Flow over Disk-Cavitator
Research on the Efficient Cylinder Cutting on CNC Boring Machine Combining with Self-Made Welding Cutter
Simulation and Analysis of Crashworthiness of Thin-Walled Structures
Finite Element Analysis of a Flexible Ferris Wheel
Use of D-InSAR Technique for Monitoring Ground Subsidence in the Yanzhou Coal Mining Area (China)
The Design of Ternary Joint Robot Fingers without Drive Based on the Topological Graph of Kinematic Chain
Wave Propagation in Coarse Grain Structure in UT Inspection
China Logistics System Reconfiguration under the System Resource Constraint after the Financial Crisis
Effect of the Content of Sn on Microstructure and Mechanical Properties of Bi5Sb Solder Alloy
Dynamic Buckling of Composite Bars Subject to Axial Impact
Decomposition Model Based on Optimal Power Flow in Interconnected Electricity Networks
Study on Co-KZr2(PO4)3-Type Crystalline Purple Ceramic Pigments
New Method for Pipeline Leakage Measurement in Pneumatic Industry
Method of Subjective Lexicon Creation for Chinese Sentiment Analysis
Method of the Safety Early Warning on Hazard Installations
Sealing Structure Design and Analysis of Non-API Pipe Connection
Study on the Enrichment Degree of Coalbed Methane Based on the Fuzzy Comprehensive Evaluation
FEM Simulation on the Structural Reliability of Beam Pumping Unit Based on the Methods of Monte-Carlo
Electro-Hydraulic Servo Control Based on CMAC Neural Network for Excavating Robot
Corrosion and Oxidation Resistance of Electroless Ni-P-Al2O3 Composite Coatings on Carbon Steel
Research on Optimization for Pneumatic System's Air Supply
Study on Physical Mechanism of Metal Magnetic Memory Technique
An Integrated Management Control Information System for Mine Production Based on Three-Tiered Structure
The Study on Horizontal Evaluation for Low-Tech Manufacturing Industry in Chinese
Detection of Crack Growth Rate in 45 Steel by Metal Magnetic Memory
Development of Wireless Resistance Strain Gage Based on ATmega16
Incorporating Stakeholder Perspectives into Collaborative Product Design
A Research of Apparatus and Optimal-Control Theory on Precision Seeding in Forestry
Research and Development of Multi-Function Excavator Drill with Hydraulic Rotary Cutting and Pneumatic Impacting
A Study on the Structures and Properties of B-Bearing Cast Steel for Wear Resistance
Investigation of Granulated Metal Fabricated by Short Flow Casting Technology
Investigation and Application of Cold Extrusion Forming Process in Die Structure Design of Plug Extremity
Numerical Analysis of Friction Distribution in the Rod Rolling Process
A Secure and Efficient Buyer-Seller Watermarking Protocol
Ball-End Cutter Machining Process Analysis in Five-Axis Milling
A Method of WAV Broadcast Using the I2S of LPC2300 Series ARM Chipset
A Multi-Layer Trust Management in Open Networks
Scene Detection in Videos Using Mutual Information
An Efficient Genetic Simulated Annealing Association Rules Method
An Efficient Multi-Hop Clustering Routing Algorithm in Wireless Sensor Networks
P2P Technology Application and Research of Grid Computing
Preparation and Mechanics Properties of MR Elastomers Based on Silicone Rubber
Transient Performance Simulation of Single-Cylinder Engines Based on Tribology Behaviors
Coupled Vibration Analysis of a Fluid-Filled Pipe by Wavenumber Prediction
Investigation on Energy Absorption Characteristics of PVB Laminated Windshield Subject to Human Head Impact
Porting of EtherCAT Soft Master and Developing of a New Type of Open Motion Controller
Entire Contact Design Theory for High Performance Drum Brake
Software Design of On-Line Measuring System
Mechanical Property Analysis of Micro-Contact Resistance of Surface Coating
Design Task Decomposition in the Servo Press
Life Cycle Assessment in Different Product Design Stages - A Coffee Pot Case Study
Bearing Fault Diagnosis Based on Multi-Sensor Information Fusion with SVM
Rotor Crack Detection Based on Multi-Vibration Signal Fusion Collected from the Basement of Machinery Using SVM and Statistical Characteristics Methodology
Research on Feature Extraction Experiment for Acoustic Emission Signal of Rotor Crack Fault
Research on Arrangement of Sensors on Rotating Machinery Base Based on ANSYS
Mechanical Response of Laminate (Glass/Epoxy) at Different Periods of Environmental Conditioning (Saturation and Ageing)
A Heuristic Optimized Algorithm for Energy Optimization in Wireless Sensor Networks
An Improved Elliptic Curve Digital Signature Algorithm
Research on Adjustment System for Electrohydraulic Proportional Variable Displacement Pump A4VSO
Development of Intelligent Forming Dies with In-Process Defect Detection System for Sheet Products
Tolerance Allocation and Maintenance Optimal Design for Fixture in Multi-Station Panel Assembly Process
Baysesian Neural Network Approach to Detecting Temper Embrittlement of 30Cr2MoV Rotor Steels
Research on the Information Extraction of the Whole Machine Simple Model and Characteristics Reproduction
An Effective EMD-Based Feature Extraction Method for Boring Chatter Recognition
Study in the Modeling Methods of Multi-Batch Experiment Data and Technology of Error Correction
The Composition Kinematic Reliability of Path Mechanism
Ultrasonic Transducer Design via APDL Optimization
An Increment Transfer Matrix Method for the Torsional Vibration Response of Steam Turbo-Generator Shaft System
Simulation on Vibration of Engine Crank-Connecting Rod Mechanism with Manufacturing Errors Using ADAMS
Modeling the Horse's Musculo-Skeletal System: A Step Towards the Design of Bionic Motorcycle Frame
Large Wind Turbine Dynamic Modeling and Simulation
Working Space Analysis and Simulation of Modular Service Robot Arm Based on Monte Carlo Method
The Design of Embedded Wireless Monitoring System Based on ZigBee Technology
Vibration Qualitative Properties of Nonhomogeneous Membrane
Study on Joint Characteristics and the Stability of the Flexible Manipulator Considering the Control Performance
Research on Low Temperature Performance of Epoxy Asphalt Mixture
Determination the Modifier Content in SBS Modified Asphalt Based on Infrared Spectroscopy Technique
Influence of Micro-Addition Chromium on the Valence Electron Structure and Toughness of Fe2B Phase
Investigation on Harmonic Response of Pneumatic Vibration Isolation System with Single and Double-Frequency Excitations
Surface Texture's Role in Assessing Surface Integrity of Machined Parts
RFID-Based Optimization Method for Inventory Control Strategy
Application of Reverse Engineering Technology in Constructing Prototype Surface
User's Preference Aggregation Based on Parallel Interactive Genetic Algorithms
Performance of Wood-Polymer Composite Prepared by In Situ Synthesis of Terpolymer within Wood
Evaluation on Emergency Management System in Supply Chain Based on Trapezoidal Fuzzy Order Weighted Average (FOWA) Operator
Empirical Study of the Influencing Factors of Supply Chain Risks
Optimization Models and Heuristic Method Based on Simulated Annealing Strategy for Traveling Salesman Problem
Financial Management of the Company for Financial Crisis
E-Commerce Model Based on Grid Computing
Framework Construction of Condition-Based Maintenance System
The Dynamic Balancing Performance of the Machinery Based on Virtual Prototyping Technology
Research on Electrohydraulic Servo Proportional Speed Regulation System for Anti-Explosion Hydraulic Hoisters
Reliability Modeling and Simulation of Mechanical Equipment Undergoing Maintenance
Contour Features Based Comfort Evaluation Criterion on School Chair Surface
Computer-Aided Working Space Design for Driller Control Cab
A DSP-Based Design for Generating Limited White Noise Wave
Fault Diagnosis Method Based on Supervised Incremental Local Tangent Space Alignment and SVM
Computer Aided Geometric Tolerance Specification in 3D-CAD System
Study on Nonlinear Energy Pumping of the Vibration System with Cubic Damping Absorber
Research on Semi-Passive Shunted Piezoelectric Membrane for Sound Isolation with FEM
The Analysis of Energy and Environmental Efficiency Based on Input-Output Model
The Design of Electronic Engineering Budget Software Based on Construction Drawing Recognition Technology
Improvement of Oxidation Resistance of A NiAl Eutectic Alloy Doping with Dy
General Fractal Dimension Calculation of Vibration Signal Based on Correlation Integral
CFD Research on Aerodynamic Performance of Complicated Resistance Muffler
Design and Analysis of Slide Valve Used in Water Hydraulic Servo Valve Based on Flow Field Simulation
Feature Description for Streamlined Structure
The Research on Robust LQ Control Applied to Uncertain Vibration Isolation System
Study on the Mechanical Properties of the Hydropneumatic Fender
Kinetic Analysis of a Cylindrical Shell Partially Treated with Constrained Layer Damping
Design and Development of Vehicular Monitoring System for Passenger Car Based on Protocol SAE J1939
A Novel Literature Retrieval Model of Digital Library Based on Wiki Technology
Research on Control Power and Self-Sensing Technology for GMM Self-Sensing Actuator
5-Gram Unified Event Model
The Measurement of Dynamic Stress for The Top-Cutter Machine of Cotton
Parameters Varation of Electronic Components in Fuze under High Stress Fields
Auricle Bracket Rapid Prototyping Optimization and Process Control
Relations of Low-Carbon Steel Surface Layer Hardness of Hard Facing and Welding Techniques
QoS Parameters of Grid Services and Service Matchmaking
The Design of College Network System
Key Problem in Support Vector Machine Model
The Realization of Design of Agile Commerce Based on Web Service
Research and Implementation of Fast Image Fractal Coding Algorithm
Technology of High-Speed Milling Process and Programming Optimization for Beverage Bottle Hollow Mold
Mechanism of Early Cracking and Serviceability of Precast Reinforced Concrete Bridge Deck Slabs
Modal Aanalysis of the Composite Material Blade
Structure Analysis and Optimization of the Rotor of a Vertical Motor Based on Virtual Prototyping
The Granule Mechanic Model for Numerical Simulation of Coal Stream in Coal-Fired Power Plant
Fretting Fatigue Behavior of Riveted Al 6XXX Components
Design and Manufacture of Three Dimensional Integrated Braided Composite Tube with Flange
Effects of Heating Period of Time on Tensile Property of Plain Woven Fabric/Epoxy Resin Laminated Composites at High Temperature
Numerical Method for Earthquake-Induced Pounding between Girder and Shear Key. I: Theory
Fracture Test and Analysis of Notched Bars Fabricated from Q235 Steel at Room Temperature
Research of Finite Element Simulation for Diesel Intake Port
Optical Transmittance and Band Gap of Electrodeposited Cu2O/ITO Layers
A Fair Algorithm of Congestion Control to Improve HSTCP
Study on Fretting Wear Behavior of Medium Carbon Steel Used in Steel Worm Gear Pair
Analysis on Fuzzy Evaluation of Green Design Based on Life Cycle
Compressive Strength and Splitting Tensile Strength of Steel Fiber Reinforced Ultra High Strength Concrete (SFRC)
Experimental Study on Early Anti-Cracking Properties of Polyvinyl Alcohol Fiber Reinforced Cementitious Composites
An Artificial Immune System for Frequency-Variable Air Conditioner
Characterization and Tribological Behavior of Ni-Base Alloy Coatings Prepared by Electro-Spark Deposition
Microstructure and Tribological Properties of Ni-Co/SiC Coatings Prepared by Occlusion Electroplating for Grinding Tools
Research on Abrasive Wear Resistance of Cemented Carbide Welding Coatings for Debris-Ejecting Blade of Driller
Effects of Additional Mass on Modal Experimental Analysis of 3-Dimension and 5-Direction Braided Composites
Synchronous Suspension Control Study for Spherical Reluctance Driving Joint with Magnetic Levitation
Permanent Deformation Behavior of Composite Structure Asphalt Concrete
The Nonlinear Dynamic Behavior of Double-Disk Isotropic Rotor System with Rub-Impact
Investigation on the Subsynchronous Vibration Fault Diagnosis and Control for Centrifugal Compressor
Study on the Automation Method of Regular Expression to Finite Automaton
A New Simulating Model of Wireless Channel - Rayleigh-Normal Model
Equivalent Elastic Modulus of the Open-Cell Cellular Solids
Geographic Profiling Methods: Improvement and Combination
The Study on Organizational Change and Efficiency Based on Virtual Manufacturing
Study on Electron Beam Welding of AZ61 Magnesium Alloy
ANN Modeling for the Drop Impact Dynamics of Mobile Hard Disk
Research on Comprehensive Utilization of Waste Rubber and Aged Asphalt
Energy Absorption of Ultra-High Molecular Weight Polyethylene Fiber-Reinforced Laminates at High Strain Rates
Implementation of the JPEG on DSP Processors
Design about the Laser Marking Machineof Two-Work Location
Numerical Simulation of Agitated Flow Field of Submersible Mixer Based on Computational Fluid Dynamics
The Quick and Simple Algorithm for Circular Interpolation
Analysis of Three-Axis Turntable for Motion Simulation Based on Virtual Prototyping
Finite Element Analysis and Optimal Design for Mold Shelf of Powder Molding Press
Dynamic Characteristics Research for Mechanical Timing Mechanism in Ammunition by Simulation
The Research and Implementation of Particle Effects Algorithm in Virtual Environments
Design and Characteristic Analysis for Indexing Mechanism of Rotation Worktable
Influence of Homogenizing Annealing Process on Microstructure and Mechanical Properties of as-Cast Mg-Gd-Y-Zr Magnesium Alloy
Numerical Study on Process of Breaking Rock with TBM Cutter in Different Cutting Orders
Design and Implementation of UDDI Registry Center
Design and Implementation of Conference Management System Based on ASP
Prediction of Pressure Drop of a Wave-Plate Gas-Liquid Separator by CFD
Investigation of Laser Welding on Vehicle Safety Parts
Heating Current Control in Electric Hot Minipore Drilling Hard-to-Cut Material
Research of Installing Small Reactors on Neutral Points of 500 KV Autotransformers and the Analysis of Overvoltage
Calculating Methods on Remained Measure of Repairing Mold in Green Product Design
The Granulation Technique of Rice Straw and its Mechanical Equipment Design
Research on Indeterminacy Causal Inductive Automatic Reasoning Mechanism
Research on Stress-Strain Field and Fatigue Lifetime of the Hot Stamping Die
Full Field Response Prediction Technique in Dynamic Design
Effect of Transition Curve on Gear Bending Strength
Research on Dynamic Disturbances Induced Catastrophic Failure of Deep Rock Mass Based on Synergetics
Study on Aging Strengthening Behavior of ZK60 -2.0%Nd-1.0%Y Alloy
The Robust Design of Four-Bar Linkage with Clearance Based on Sensitivity Analysis
Application of Ground Penetrating Radar to Rock Failure Analysis in High Risk Tunnels
On High Pressure Squeeze Pack Numerical Simulation of Unconsolidated Sandstone Based on Discrete Element
Research on Fracturing Mechanism of Ground-Drive Screw Pump Polish Rod
Experimental Research on the Thermal Insulation and Flame Retardancy Performance of WPC Wallboard Made of Paper-Aluminum-Plastics Wastes
ICAN Series Functional Module Theory in Lifting Moment Restriction System
Effects and Mechanism of Titanium Modification on Shrinkage Cavity and Porosity of Cast Steel
Load Analysis of Crankshaft of Axial Three-Cylinder Hydraulic Confined Piston Engine
Dynamic Analysis for the Wind Turbine Generator Blades
The Dynamic Research on Flexible Impeller of the Large Wind Generators
Comparative Study of Drill Pipe Erosion Wear in Gas Drilling and Mud Drilling
Analysis of Flow Field on Hydraulic Unit of the Water Injection Pump by 3-D Numerical Simulation
Optimal Design of Slip Dog Based on the Elasticoplasticity Contact Analysis
Fatigue Propagation Lifetime Prediction of Rotary Kiln Weld Shell
Design Theory of Profile Connection and Overview of Manufacturing Technology
Design of an Images Security System
Design of Multi-Channel Data Acquisition System Based on PXI 6281
Research on Education of Creativity and Innovation
Tool Wear Monitoring in Milling Processes Based on Cointegration Modeling
Bifurcation Control for a Kind of Non-Autonomous System with Time Delay
Research on Dynamic Characteristics of 750KW Wind Turbine Flexible Blades
The Numerical Simulation of Aerodynamic Performance for Wind Turbines' Blade Wheel
Cotton Picker Picks Roller Motion Simulation and Dynamics Analysis
Algorithm Research for Non-Preemptive Scheduling on Multiprocessor
Study on Additional Electrical Current on Machinability of Free-Machining Steels in Turning
Effects of Cr Doping on the Structural and Electrochemical Properties of V6O13
Preparation of Graphene with Ultrasound-Assisted in the Process of Oxidation
BDA Models and Application for Recognizing the Headstreams of Mine Waterburst
The Performance Validation of Linear Programming Algorithm Based on Integrated Benchmark
Finite Element Analysis of Vertical Continuous Collapse of Six-Story Frame Structure
Corrosive Wear Behavior of Several Materials Coupled with Si3N4 in the Molten Zinc
On-Line Measuring Principle of Ferrous Ion in Fluxing
Effect of Cryogenic Minimum Quantity Lubrication (CMQL) on Cutting Temperature and Tool Wear in High-Speed End Milling of Titanium Alloys
Cognates and Spherical Hinge Replacement of Spatial RSSR Mechanism
Study on Turning Parameter Optimization of Austenitic Stainless Steel
Optimal Design of Engine Variable Stretching for Valve Stem of 157FMI
Finite Element Modal Analysis of the Quick Positioning System of Wire Bonders
Study on the Mechanical Performance of Glass Fiber 2D Woven Fabric Laminated Composites with Different Splicing Shape and Interval Length
Dynamic Characteristics of Vibrating Screen with Determinate Structure and Statically Indeterminate Structure
Study on the Tensile Strength Loss Rate of Glass Fiber 2D Woven Fabric Reinforced Laminates with Ladder Splicing
Modeling and Simulation on Light Axial Piston Pump
Knowledge Representation Method of Product Principle Solution Based on Semantic Network Model
Numerical Simulation for the Milling of Alluminum Alloy Thin-Wall Workpiece with Two and Four Flutes Helical Cutter
Properties of the Plasma Sprayed NiCrAlY+ (ZrO2+CaO) Graduated Coating on 1Cr18Ni9Ti Steel
Flywheel Energy Storage Used in Enhancing the Construction Machinery Engine Speed Stability
Studies on Ground Environmental Vibration Induced by Urban Rail Transit
Dynamic Deformation of Railway Tunnel Bedding Structure
The Effects of Concrete Strength Grade on Concrete Impermeability and Gas-Proof
A Study on the De-Noising of the Passive Sonar in Underwater Robot Based on the Gabor
Simulation of Suspension-Tire System Model Based on Rear Axle of Twist Beam
A Lightweight Distributed Computing System Based on JavaScript Technology
Dry Sliding Behaviors of PDCPD Nanocomposite Prapared by RIM
Artificial Intelligence Optimization on Automobile Drive Axle Assembly
Application of Time-Frequency Distribution and FRFT in Modal Parameter Identification
Developing MCDM Approach Based on GRA and TOPSIS
Analysis and Experimental Investigation of Chatter Suppression in High-Speed Cylindrical Grinding
Transverse Stiffness and Guiding Characteristics Analysis of Compliant Linear Guided Mechanism
Performance Analysis on Electrical Aided Turbocharged System
Prediction of Fuel Consumption per 100km for Automobile Engine Based on Gaussian Processes Machine Learning
Research on Dynamic Tension Control Theory for Heavy Scraper Conveyor
Grid-Based Platform for Mining Association Rules
Design Task Decomposition in the Servo Press
Tribological Properties of Polydicyclopentadiene Filled with Chemically Treated Expanded Graphite
Application with Theory of Vibration Equivalence on Reliability Test Bed of Train Brake System
RFID-Based Optimization Method for Inventory Control Strategy
Numerical Simulation of Relationship between Equivalent Elastic Modulus of Porous Titanium Alloy / HA Coating Composite and Fraction Dimension
Modeling and Dynamic Analysis for Rigid-Flexible Coupling Nonlinear Floating Raft Vibration Isolation System
Parameter Design of Heave Compensation System of Deep-Sea Mining Based on Dynamic Vibration Absorber and its Experimental Study
A Study on the Modelling and Simulation of Part Motion in Vibratory Feeding
The Globally Asymptotic Stability of Reaction-Diffusion Cellular Neural Networks with Time Delays
Expectation Value Calculation of Grid QoS Parameters Based on Algorithm Prim
Synergistic Corrosion Resistance of Cerium Film and Silane Film on Hot-Dip Galvanized Steel