
Fracture and Strength '90
Trans Tech Publications Ltd (Publisher)
Published on 1. January 1991
Book
Paperback/Softback
576 pages
978-0-87849-618-1 (ISBN)
Article exhausted; check different version
Description
The book sums up our present knowledge of the field and also provides a lot of new research results.
The book sums up our present knowledge of the field and also provides a lot of new research results.
More details
Series
Language
English
Place of publication
Zurich
Switzerland
Target group
College/higher education
Professional and scholarly
Dimensions
Height: 240 mm
Width: 170 mm
Thickness: 29 mm
Weight
1320 gr
ISBN-13
978-0-87849-618-1 (9780878496181)
DOI
10.4028/www.scientific.net/KEM.51-52
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions

Kang Yong Lee | Hideaki Takahashi
Fracture and Strength '90
E-Book
01/1991
Trans Tech Publications Ltd
€211.86
Available for download

Kang Yong Lee | Hideaki Takahashi
Fracture and Strength '90
Software
01/1991
Trans Tech Publications Ltd
€386.15
Shipment within 10-20 days
Content
<ul><li>Waveform Effect on the Low Cycle Fatigue Behavior of AISI 304 Stainless Steel at High Temperature</li><li>Low-Cycle Fatigue Life Prediction of Circumferentially Notched Component Based on Elastic-Plastic Stress Strain Analysis</li><li>Strain Behavior in the Vicinity of Crack Tip in Fatigue Fracture of Polymer and Its Life Estimation</li><li>Viscoelastic Analysis of Residual Stress and Deformation of PP Resin in Cooling Process</li><li>A Theoretical Study on Creep Damage Detection by Ultrasonic Wave Measurement</li><li>Influence of Non-Metallic Inclusions on Fatigue Strength of High Manganese Steel</li><li>Effects of Small Defects and Nonmetallic Inclusions on the Fatigue Strength of Metals</li><li>Fatigue Properties of Nitrided Ti-6Al-4V Alloy</li><li>Relation between Critical Size of Inclusion Responsible for Fatigue Failure and Inclusion Size Distribution</li><li>K<sub>II</sub> Influence on the Shape of Caustics in CT and CC Specimens</li><li>Accuracy Improvement Technique for Measuring Stress Intensity Factors in Photoelastic Experiment</li><li>Stress Intensity Evaluation for Surface Crack with Use of Boundary Element Method and Influence Function Method and the Surface Crack Extension Analysis</li><li>Determination of Thermal Stress Intensity Factors for Symmetric Lip Cusp Crack by Boundary Element Method</li><li>Development of the Method to Evaluate the Fatigue Life of Spot-Welded Structures by Fracture Mechanics - Development of BEM-Spot System to Analyze the Stress Intensity Factors by Use of Boundary Element Method</li><li>Efficient Boundary Element Analysis of Stress Intensity Factors for Interface Cracks in Dissimilar Materials</li><li>An Investigation on the Behavior of Longitudinally Cracked Pipe Wall due to Thermal Striping</li><li>Direct Observation of Crack Tip Phenomena and a Dislocation Model of Fracture</li><li>Stress Corrosion Cracking Behavior of Al-Li Alloys</li><li>Stress Corrosion Cracking of High Strength Steels and Their Weldments in Synthetic Sea Water</li><li>Relation between Test Temperatures and Notch Tip Radii in Tensile Fracture Manner of Center Notched CFRP</li><li>Notched Strength of Woven Laminate Composites Containing Circular Holes</li><li>Failure Criteria for Symmetric Balanced Angle-Ply Laminates under Uniaxial Loading</li><li>Failure Criteria for Carbon/Epoxy Composites under Biaxial Loading</li><li>The Micromechanics Study of Crack Propagation in a Cross Ply E-Glass/Epoxy Laminate under Hydrochlorid Acid</li><li>A Study on the Fracture Mechanics of Orthotropic Plate under Pure Shear Force (A Study on the Development of the Pure Shear Force Device for Orthotropic Materials)</li><li>Effect of Vickers Indented Load and Microstructure on Hardness, Bending Strength and Fracture Toughness in Sintered Silicon Carbide Ceramics</li><li>Effect of Stress Corrosion Cracking on Fracture Strength of Si<sub>3</sub>N<sub>4</sub></li><li>Particle Impact Damage in Silicon Carbide</li><li>Particle Impact Damage on Ceramics</li><li>Mechanics Approach to Fracture Strength of Ceramics/Metal Joints</li><li>The Evaluation of the Strength of Adhesive Joints by Application of Fracture Mechanics</li><li>Strength Evalulation of Carburized Gear Teeth Based on Fracture Mechanics</li><li>The Effect of Microstructural Variation on the Mechanical Properties of Ti-10V-2Fe-3Al Alloy</li><li>Effects of Austempering on Fatigue Crack Propagation Resistance of Ductile Cast Irons</li><li>The Effect of Load Ratio and Grain Size on Fatigue Crack Growth Rates in Nickel Base Superalloy AP-1</li><li>An Analysis on Surface Crack Growth under Rotary Bending Fatigue in Terms of Fracture Mechanics</li><li>Fatigue Crack Propagation between Holes or Ingredients</li><li>Surface Crack Growth Behavior in Corrosion Fatigue of Off-Shore Structural Steel</li><li>Material Degradation and Strength Characteristics of a Long-Term Operated HP-IP Rotor</li><li>Analytical Evaluation of Remaining Service Life of Fossil Steam Turbine Rotor and Casing</li><li>Standardization of Grain Boundary Etching Test Method for Evaluating High Temperature Material Degradation</li><li>The Evaluation for In-Service Material Degradation of Superheater Tubes of Fossil Boiler</li><li>DBTT Estimation of Ferritic Low Alloy Steels in Service Plant by means of Small Punch Test</li><li>Fatigue Crack Behavior under Constant Stress and Two-Step Block Stress</li><li>Effect of Single Overload on Retardation Behavior in 7075-T73 Aluminium Alloy</li><li>Estimation Method of Elastic-Plastic Fatigue Crack Growth Rates under Variable Amplitude Loadings</li><li>Fatigue Crack Growth and Closure through a Tensile Residual Stress Field under Random Loading</li><li>Fatigue Crack Acceleration and Retardation in Glassy Polymers due to a Single Peak Overload</li><li>Effects of Accelerated Thermal Aging and Prestressing on Fracture Toughness of A533B-1 Steel</li><li>Effect of Temperature on the Elastic-Plastic Fracture Toughness in A516 Gr70 Steel</li><li>Elastic-Plastic Fracture Toughness Test under Mixed Mode Loading</li><li>Study on the Ductile Fracture of Aluminium Alloys - Observation of the Fracture Process by FRASTA and FEM Simulation -</li><li>Maximum Load Prediction in Plane-Strain Ductile Fracture</li><li>The Near Crack Tip Deformation and Fracture Initiation of a Ductile Material under Mixed Mode Loading</li><li>A Study of Mixed Mode Fracture Criterion - Maximum Tangential Strain Energy Density Criterion </li><li>Impact Force and Elastic Response of Tapered Bars in Collision with Rigid Wall</li><li>Dynamic Crack Propagation in a Micropolar Medium</li><li>Fatigue Crack Closure Monitoring at Elevated Temperatures Using Laser Interferrometric Displacement Gage</li><li>Effect of Crack Surface Oxidation on Near-Threshold Fatigue Crack Growth Characteristics in A508-3 Steel at Elevated Temperature</li><li>The Fatigue Crack Propagation Behavior of the Submerged Arc Welded Plate</li><li>Prediction of Fatigue Crack Growth Rate in Residual Stress Fields</li><li>Stress Analysis around Micro Surface Cracks by FEM Modeling of 3 Dimensions</li><li>Fracture Mechanics Analysis of the Mode I Crack in the Variable Thickness Plate Having Fillet</li><li>Efficient Improvement of Virtual Crack Extension Method by a Derivative of the Finite Element Stiffness Matrix</li><li>Application of the J<sub>k</sub> Integral to Arc Cracked Rotating Disks</li><li>Discontinuity of Stress Intensity Factor for Kinked Interfacial Crack under Anti-Plane Shear</li><li>Thermoelastic Analysis of an Interfacial Crack in Bimaterial</li><li>Development of Inelastic Constitutive Relations</li><li>Axisymmetric Contact Problem in Consideration of Tangential Displacement</li><li>A Study on Width Spread in 2-High Rolling of Rectangular Bars</li><li>Deformation of Circular Tubes in Lateral Compression</li><li>Fracture Strength Evaluation of Welded Joint in Steels by Using Small Punch Test</li><li>An Improvement of the Fatigue Strength of the Spot-Welded Lap Joint</li><li>A Study on the Effect of the Building up by Welding on the Fatigue Fracture Behaviors for the Forged Steel </li><li>Load and Strain Histories for CFRP Laminates under Low Velocity Impact</li><li>Impact Damage Energy of Laminated Composite Beams Subjected to Transverse Impact</li><li>Evaluations of Performances to Plasma Disruption and Neutron Irradiation of Graphites and C/C-Composites as First Wall Components for Fusion Reactor Devices</li><li>A Fabrication Method of Aluminium-Short Fiber Alumina Metal Matrix Composites Processed by Compocasting</li><li>Small Punch Test for Ceramic Composites at Very High Temperature</li><li>Fracture Behaviors and Mechanical Properties of Metal Matrix Composites</li><li>Ultrasonic Testing of Closed Cracks</li><li>Measurements of Residual Stress in the Field of the Stress Gradient by the Hole Drilling Method</li><li>Crack Prevention of S-Tech Wood during Autoclave Drying by means of Accoustic Emission Technique</li><li>A Study on the Development of Orthotropic Photoelastic Material Having Arbitrary Size and Direction</li><li>One-Point-Bend Impact Testing of Ceramic Material</li><li>Evaluations of the Critical Current Densities of Carbon Brushes by Thermal Shock Fracture Testings</li><li>Probabilistic Life Assessment for Surface Cracked Body by an Influence Function Method</li><li>The Probabilistic Prediction of the Fatigue Crack Propagation Life of a Semi-Elliptical Surface Crack</li><li>Fatigue Crack Initiation and Growth Life Prediction with Statistical Consideration</li><li>Nondestructive Detection and Evaluation of Materials Degradation of 2.25Cr-1Mo Steel by means of Electrochemical Method</li><li>Degradation Problems in Life Prediction</li><li>Fracture Behavior and Acceptance Size of Flaw for Pressurized Piping</li></ul>