Advanced Materials Processing II

<ul><li>The Alchemy of Today: Functioning of Traditional Ceramics Utilizing Nanostructure</li><li>Cost Effective Synthesis, Processing and Applications of Light-Weight Metallic Materials</li><li>Low-Cost Deposition of Highly-Conducting Indium-Tin-Oxide Transparent Films by Chemical Process; Spray CVD and Dip Coating</li><li>Magneto-Sensitive Dielectric Permeability in Nano-Composite Ferromagnetic Oxide Films Prepared by RF-Sputtering</li><li>Preparation of LaNiO₃ Thin Film Electrode Grown by Pulsed Laser Deposition</li><li>Mechanical Properties of Sputtered TiNiCu Shape Memory Alloy Thin Films</li><li>Structure and Properties of TiN/TiAlSiN/TiN PVD Coatings on Cemented Carbides and Cermets</li><li>Dimensional and Microstructural Dependence of the Magnetic Properties of Electrodeposited Co(P) Nanowire Arrays</li><li>Tribological Properties of Plasma Sprayed Fe₃Al-Al₂O₃ Graded Coatings</li><li>Effect of Nanocrystalline Electroplating of NiFe on the Material Permeability</li><li>Effect of pH Values on Magnetic Properties of Electroplated NiFe Layers</li><li>Effect of Current Density on the Magnetic Properties of Electroplated NiFe Layers</li><li>Effects of Sonication on the Crystal Orientation of Electrodeposited Palladium Film from Ammonia Bath</li><li>Surface-Layer's Structure of X40CrMoV5-1 Steel Remelted and/or WC Alloyed with HPDL Laser</li><li>Improvement of Tensile Strength of CVD SiC Fiber</li><li>Plasma Spray Fe₃Al-Al₂O₃ Graded Coatings</li><li>Improved Affinity to Metallization of Graphite/Polymer Composites by Oxygen Plasma Treatment</li><li>Fully Integrated Hybrid Polymeric Carbon Nanotube Composites</li><li>Equal Channel Angular Pressing of Metallic Powders</li><li>Structure and Properties of Nanocrystalline Composite Materials</li><li>The Origin of High Strength and High Ductility in Nanostructured Mg-5%Al-x%Nd Alloys</li><li>Microstructure and Mechanical Properties of a Mg-5AI Alloy Synthesized by Mechanical Alloying</li><li>Influence of High Energy Ball Milling on the Carbothermic Reduction of Ilmenite</li><li>A Newly Devised Single Shear Test for Metal Powder Compact</li><li>Fabrication and Microstructure of Mechanically Alloyed Mg-Al-Nd Alloys</li><li>High Energy Impact Resistance of Sb-Sn Lead-Free SMT Joint</li><li>Optimising Gas-Assisted Injection Moulding Process Using the Taguchi Method</li><li>Process Stability and Capability Studies of Polymer Micro Moulding Process</li><li>Investigation on Thermal Debinding of Powder Injection Molding</li><li>Structure and Properties of the Heat-Treated High-Speed Steel HS6-5-2 and HS12-1-5-5 Produced by Powder Injection Molding Process</li><li>Thermal Treatment of M2 High-Speed Steel Powder for Rapid Tooling Applications</li><li>In Situ Synthesis, a Alternative Way to Produce Materials?</li><li>Effect of Alloying Elements on the Mechanical Properties of Cu-15%Cr In Situ Composites</li><li>Reactive Products of Carbothermic Reduction of Ilmenite in Mixed Air for Iron-Based Ti(C,N) Composite</li><li>Development of an AZ91A/Cu Hybrid Composite with Improved Mechanical Properties Using the Novel Technique of Disintegrated Melt Deposition</li><li>Synthesis of Al/TiC_p Based Functionally Gradient Materials Using the Novel Technique of Gradient Slurry Disintegration and Deposition: Effect of Particulates Feed Rate</li><li>Fabrication of Ti/TiC/SUS304 Laminated Composite through Concurrent Combustion Synthesis and Diffusion Bonding</li><li>Processing Metal-Matrix Composites for Superplastic Properties</li><li>Al-SiCp Composites by Underwater Shock Compression</li><li>Effect of Powder Characteristics on Microstructural Development in Bodies Produced by Pressureless Sintering of AI/TiO₂ Composite Powder</li><li>Preparation and Properties of Iron Oxide Nanoparticles in a Na-Y Zeolite Matrix</li><li>Aging Characteristics of ICA for SMD on Flex</li><li>Study of the Reinforcement Percentage of Mg-Al-SiC MMC in Relation to the Mechanical Properties and Machinability</li><li>Investigations into Erosion Wear Performance of Functionally Graded Chromium Oxide - Alumina Titania Ceramic Composite Deposits</li><li>Oxide and Nitride Thin Films: Processing and Characterization</li><li>Precision Thickness Measurement of Ultra-Thin Films via XPS</li><li>Properties of PVD Coatings on a Brass Substrate</li><li>The Effect of Annealing in High Vacuum on the Oxidation and Photoluminescence of Zinc/Silicon Nanoparticles in Thin Films</li><li>Environmental Effects on the Frictional Behaviour of an Unhydrogenated Diamond-Like Carbon Coating</li><li>A Study of the Corrosion Resistance of Electroplated Nanocrystalline and Polycrystalline Nickel Coatings</li><li>A Study on the Hot Working of Al/SiC Composites - Part I</li><li>A Study on the Hot Working of Al/SiC Composites - Part II</li><li>Modeling of Secondary Processing Parameters of 6061-AlSiC_p Composite</li><li>Formability Analysis of Al/15% SiCp Composites</li><li>Preparation and Characterization of PMMA-Based Transparent Solid Polymer Electrolyte with Li Imide and Li Triflate</li><li>Rotational Moulding of Particulate Reinforced Polymeric Shell Structures</li><li>Thermal Conductivity, Thermo-Mechanical and Rheological Studies of Boron Nitride-Filled Polybutylene Terephthalate</li><li>Advanced Materials Processing with Infrared</li><li>Selective Laser Melting of Li₂O.Al₂O₃.SiO₂ (LAS) Glass Powders</li><li>Two Novel Techniques for Forming Regularly Spaced Deep Recesses on Aluminium Sheet Panels</li><li>Microstructure Analysis of Pd/CeO₂ Mixed Oxides Prepared by Deposition-Precipitation Method</li><li>A Modified Explosive Welding Technique Using Regulated Underwater Shock Wave</li><li>Effect of Heat Treatment on Structure and Properties of Experimental Hot-Work Tool Steel 47CrMoWVTiCeZr16-26-8</li><li>Effect of Additives on Sinterability and Densification of Laser-Sintered Metal Powder</li><li>Formation of Copper-Based Metal Part via Direct Laser Sintering</li><li>Studies of Femtosecond Laser-Processed Nitinol</li><li>The Effect of Nd: YAG Laser Irradiation on the Microstructure of Human Dentin</li><li>A Study on the Prediction of Process Parameters in the Gas Metal Arc Welding of Mild Steel Using the Taguchi Method</li><li>Zeolite Catalyst Synthesis: Characterization and Their Catalytic Activity for Reduction of Gasoline Exhaust Gases</li><li>Reactive Sintering of Nickel Aluminide and its Magnetic Responses</li><li>Sintering and Mechanical Properties of Titanium-Based Metal-Ceramic Composites Produced from Reduction of Titanium Dioxide</li><li>Laser Reactive Formation of Ti/TiN In Situ Composite</li><li>Synthesis and Characterization of Magnesium Based Composites Containing Metallic Particulates as Reinforcement</li><li>The Fracture Problem of Matrix Crack for Metallic Materials</li><li>A Study on Explosively Clad Al-SS-Al Fiber-Reinforced Metal Composites</li><li>Wear and Corrosion Behaviour of Al6061-TiO₂ Composites</li><li>Development of Low-Carbon Cold-Rolled Steel Sheets for Enameling Application</li><li>Performance Evaluation of Treated Grinding Wheels</li><li>A Study of Pin Joints in Composite Laminated Structures</li><li>Organic-Acid-Based Chemical Polishing Solutions for Fe Alloys</li><li>Isothermal Rheological Forming of High-Strength Alloying Part with Complicated Curved Surface</li><li>Shear-Induced Particle Migration in Suspension in a Capillary Pressurized Driven Circular Tube Flow</li><li>Particularity Concerning the Use of Nanomagnetic Fluids and the Magnetic Field, to Enhance the Production of Composit Parts Components Made by RTM - MNF</li><li>Lubricity of Volatile Lubricants in Ironing Process</li><li>Modelling Mechanical Properties of Nanocrystalline Copper</li><li>Simulation of Czochralski Crystal Growth by Using Lattice Boltzmann Method</li><li>Application of Neural Networks for Prediction of Hardness and Volume Fractions of Structural Components in Constructional Steels Cooled from the Austenitizing Temperature</li><li>Modelling of Explosive Cladding of LCS-Al Plates Using Artificial Neural Network</li><li>Web-Based Forging Simulation and Virtual Workshop</li><li>Experimental Modelling of Cutting Forces as a Function of Tool Wear in End Milling</li><li>The Modeling of the Solute Redistribution during the Solidification of Ternary Alloys</li><li>Finite Element Analysis of Hot Embossing of Polymer Optical Sheet</li><li>Modelling of Process Parameters in P/M Copper Extrusion for Solid Preforms</li><li>Finite Element Simulation of Axisymmetrical Tube Hydroforming Processes</li><li>A Discussion of the Dynamic Specific Heat during Solidification </li><li>Finite Element Analysis of Fastener Joints in Metallic and Orthotropic Structures</li><li>On the Processing of Nanostructured Ceramics</li><li>The Role of nc-TiN Surface Coverage by a-Si₃N₄ for the Control of Room Temperature and In-Dry-Air Oxidation Resistance of nc-TiN/a-Si₃N₄/a- and nc-TiSi₂ Nanocomposites</li><li>Metastable Phase Formation in Rapidly Solidified ZrO₂-Al₂O₃ Powders</li><li>Synthesis of Ceramic Compounds Utilizing Woody Waste Materials and Rice Husk</li><li>Rapid Manufacturing of Y-TZP Ceramic Punch Using Powder Injection Moulding Technology</li><li>Organic-Inorganic Nanocomposites with Core-Shell Structure Via Sol-Gel Process</li><li>Processing and Property Assessment of Porous Alumina and Mullite-Alumina Ceramics</li><li>The Influence of Process Parameters on Forged Magnesium Alloys</li><li>Investigation on Microstructure of Magnesium AZ91HP Alloy for Semi-Solid Forming</li><li>Evaluation on the Formability of Magnesium Alloy AZ31</li><li>Effect of Compaction Parameters on the Properties of P/M Aluminium Preforms</li><li>Microstructure of Composite Cementation Layer on Two-Phase TiAl-Based Alloy and Its Effects on Oxidation Resistance</li><li>Wear of Magnesium Composites with Continuous, Interconnected Wire Reinforcement</li><li>Mechanical Properties and Fracture Behaviour of Ti_xAl_y(O)/Al₂O₃ Composites</li><li>Effects of Additional Rolling and Annealing on the Cube Texture in the High-Purity Aluminum Foils for Capacitors</li><li>The Use of Modern Microscopic Techniques in Evaluation of Polyphthalamide and Polybutylene Terephthalate Injection Moulded Parts for Electroless Plating</li><li>The Strain Measurement in Spot Welded Joints Using the ESPI Method</li><li>Diamond-Like Carbon Films for Electrochemical Sensor</li><li>Preparation and Thermoelectric Properties of Melt-Spun Fe₂Si₅ Based Alloys</li><li>Influence of Process Parameters on Reaction Products during Self-Propagating High-Temperature Synthesis of Porous NiTi</li><li>Study of the Parameters of Electroplating of Ferromagnetic Materials in Relation to Material Permeability</li><li>Doping and Grain-Size Effects on Ferroelectric and Mechanical Properties of PZT Ceramics</li><li>Electrophoretic Deposition and Characterization of a FGM Piezoelectric Monomorph Actuator</li><li>Study of Piezoelectric Tubular Transducers</li><li>Magnetic Properties Study of Coal Oxidation Process</li><li>Formation and Characterization of Self-Ordered Ferromagnetic Nanowires by AC Electroforming</li><li>Surface Finish and Residual Stresses in Facing of Age-Hardened INCONEL 718</li><li>Modification of Torsional Characteristics of Workpiece Drive System in Cylindrical Grinding</li></ul>